* Code cleanup:
  - remove trailing white space, trailing empty lines, C++ comments, etc.
  - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)

* Patches by Kenneth Johansson, 25 Jun 2003:
  - major rework of command structure
    (work done mostly by Michal Cendrowski and Joakim Kristiansen)
diff --git a/board/spd8xx/Makefile b/board/spd8xx/Makefile
index ef173d0..13ce9fc 100644
--- a/board/spd8xx/Makefile
+++ b/board/spd8xx/Makefile
@@ -28,7 +28,7 @@
 OBJS	= $(BOARD).o flash.o
 
 $(LIB):	.depend $(OBJS)
-	$(AR) crv $@ $^
+	$(AR) crv $@ $(OBJS)
 
 #########################################################################
 
diff --git a/board/spd8xx/spd8xx.c b/board/spd8xx/spd8xx.c
index 6428896..61201d7 100644
--- a/board/spd8xx/spd8xx.c
+++ b/board/spd8xx/spd8xx.c
@@ -41,7 +41,7 @@
 	 */
 	0x0FF3FC04, 0x0FF3EC00, 0x7FFFEC04, 0xFFFFEC04,
 	0xFFFFEC05, /* last */
-	            _NOT_USED_, _NOT_USED_, _NOT_USED_,
+		    _NOT_USED_, _NOT_USED_, _NOT_USED_,
 	/*
 	 * Burst Read. (Offset 8 in UPM RAM)
 	 */
@@ -55,7 +55,7 @@
 	 */
 	0x0FAFFC04, 0x0FAFEC00, 0x7FFFEC04, 0xFFFFEC04,
 	0xFFFFEC05, /* last */
-	            _NOT_USED_, _NOT_USED_, _NOT_USED_,
+		    _NOT_USED_, _NOT_USED_, _NOT_USED_,
 	/*
 	 * Burst Write. (Offset 20 in UPM RAM)
 	 */
@@ -89,9 +89,9 @@
 	/*
 	 * SDRAM Initialization (offset 5 in UPM RAM)
 	 *
-         * This is no UPM entry point. The following definition uses
-         * the remaining space to establish an initialization
-         * sequence, which is executed by a RUN command.
+	 * This is no UPM entry point. The following definition uses
+	 * the remaining space to establish an initialization
+	 * sequence, which is executed by a RUN command.
 	 *
 	 */
 		    0x1FF77C35, 0xEFEABC34, 0x1FB57C35, /* last */
@@ -282,8 +282,8 @@
 	immr->im_ioport.iop_padat &= ~(PA_ENET_MDC);	/* set MDC = 0 */
 
 	/*
-         * RESET in implemented by a positive pulse of at least 1 us
-         * at the reset pin.
+	 * RESET in implemented by a positive pulse of at least 1 us
+	 * at the reset pin.
 	 *
 	 * Configure RESET pins for NS DP83843 PHY, and RESET chip.
 	 *
diff --git a/board/spd8xx/u-boot.lds b/board/spd8xx/u-boot.lds
index debcd49..f801d3b 100644
--- a/board/spd8xx/u-boot.lds
+++ b/board/spd8xx/u-boot.lds
@@ -98,6 +98,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
   __start___ex_table = .;
   __ex_table : { *(__ex_table) }
   __stop___ex_table = .;
@@ -120,4 +125,3 @@
   _end = . ;
   PROVIDE (end = .);
 }
-
diff --git a/board/spd8xx/u-boot.lds.debug b/board/spd8xx/u-boot.lds.debug
index bd13b7b..0245f78 100644
--- a/board/spd8xx/u-boot.lds.debug
+++ b/board/spd8xx/u-boot.lds.debug
@@ -107,6 +107,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
   __start___ex_table = .;
   __ex_table : { *(__ex_table) }
   __stop___ex_table = .;
@@ -129,4 +134,3 @@
   _end = . ;
   PROVIDE (end = .);
 }
-