* Code cleanup:
- remove trailing white space, trailing empty lines, C++ comments, etc.
- split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
* Patches by Kenneth Johansson, 25 Jun 2003:
- major rework of command structure
(work done mostly by Michal Cendrowski and Joakim Kristiansen)
diff --git a/board/esteem192e/flash.c b/board/esteem192e/flash.c
index 5322430..5465dea 100644
--- a/board/esteem192e/flash.c
+++ b/board/esteem192e/flash.c
@@ -111,7 +111,7 @@
if (size_b1) {
memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
memctl->memc_br1 = (CFG_FLASH_BASE | 0x00000801) + (size_b0 & BR_BA_MSK);
- /*((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
+ /*((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
BR_MS_GPCM | BR_V;*/
/* Re-do sizing to get full correct info */
@@ -148,7 +148,7 @@
/* set up sector start adress table */
if (info->flash_id & FLASH_BTYPE) {
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
#ifndef CONFIG_FLASH_16BIT
/* set sector offsets for bottom boot block type */
@@ -162,9 +162,9 @@
info->start[7] = base + 0x0001C000;
for (i = 8; i < info->sector_count; i++) {
info->start[i] = base + (i * 0x00020000) - 0x000E0000;
- }
- }
- else {
+ }
+ }
+ else {
/* set sector offsets for bottom boot block type */
info->start[0] = base + 0x00000000;
info->start[1] = base + 0x00008000;
@@ -186,9 +186,9 @@
info->start[7] = base + 0x0000E000;
for (i = 8; i < info->sector_count; i++) {
info->start[i] = base + (i * 0x00010000) - 0x00070000;
- }
+ }
}
- else {
+ else {
/* set sector offsets for bottom boot block type */
info->start[0] = base + 0x00000000;
info->start[1] = base + 0x00004000;
@@ -202,7 +202,7 @@
} else {
/* set sector offsets for top boot block type */
i = info->sector_count - 1;
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
#ifndef CONFIG_FLASH_16BIT
info->start[i--] = base + info->size - 0x00004000;
@@ -216,7 +216,7 @@
info->start[i] = base + i * 0x00020000;
}
- } else {
+ } else {
info->start[i--] = base + info->size - 0x00008000;
info->start[i--] = base + info->size - 0x0000C000;
@@ -237,7 +237,7 @@
info->start[i] = base + i * 0x00010000;
}
- } else {
+ } else {
info->start[i--] = base + info->size - 0x00004000;
info->start[i--] = base + info->size - 0x00006000;
@@ -362,8 +362,8 @@
/*
* Note: if it is an AMD flash and the word at addr[0000]
- * is 0x00890089 this routine will think it is an Intel
- * flash device and may(most likely) cause trouble.
+ * is 0x00890089 this routine will think it is an Intel
+ * flash device and may(most likely) cause trouble.
*/
addr[0x0000] = 0x00900090;
@@ -375,8 +375,8 @@
/*
* Note: if it is an AMD flash and the word at addr[0000]
- * is 0x0089 this routine will think it is an Intel
- * flash device and may(most likely) cause trouble.
+ * is 0x0089 this routine will think it is an Intel
+ * flash device and may(most likely) cause trouble.
*/
addr[0x0000] = 0x0090;
@@ -523,7 +523,7 @@
/* set up sector start adress table */
if (info->flash_id & FLASH_BTYPE) {
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
#ifndef CONFIG_FLASH_16BIT
/* set sector offsets for bottom boot block type */
@@ -537,9 +537,9 @@
info->start[7] = base + 0x0001C000;
for (i = 8; i < info->sector_count; i++) {
info->start[i] = base + (i * 0x00020000) - 0x000E0000;
- }
- }
- else {
+ }
+ }
+ else {
/* set sector offsets for bottom boot block type */
info->start[0] = base + 0x00000000;
info->start[1] = base + 0x00008000;
@@ -561,9 +561,9 @@
info->start[7] = base + 0x0000E000;
for (i = 8; i < info->sector_count; i++) {
info->start[i] = base + (i * 0x00010000) - 0x00070000;
- }
+ }
}
- else {
+ else {
/* set sector offsets for bottom boot block type */
info->start[0] = base + 0x00000000;
info->start[1] = base + 0x00004000;
@@ -577,7 +577,7 @@
} else {
/* set sector offsets for top boot block type */
i = info->sector_count - 1;
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
#ifndef CONFIG_FLASH_16BIT
info->start[i--] = base + info->size - 0x00004000;
@@ -591,7 +591,7 @@
info->start[i] = base + i * 0x00020000;
}
- } else {
+ } else {
info->start[i--] = base + info->size - 0x00008000;
info->start[i--] = base + info->size - 0x0000C000;
@@ -612,7 +612,7 @@
info->start[i] = base + i * 0x00010000;
}
- } else {
+ } else {
info->start[i--] = base + info->size - 0x00004000;
info->start[i--] = base + info->size - 0x00006000;
@@ -670,7 +670,7 @@
if ((info->flash_id == FLASH_UNKNOWN) ||
((info->flash_id > FLASH_AMD_COMP) &&
- ( (info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL ) ) ){
+ ( (info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL ) ) ){
printf ("Can't erase unknown flash type - aborted\n");
return 1;
}
@@ -1001,13 +1001,13 @@
if( barf ) {
barf >>=16;
} else {
- barf = addr[0] & 0x0000003A;
+ barf = addr[0] & 0x0000003A;
}
printf("\nFlash write error at address %lx\n",(unsigned long)dest);
if(barf & 0x0002) printf("Block locked, not erased.\n");
if(barf & 0x0010) printf("Programming error.\n");
if(barf & 0x0008) printf("Vpp Low error.\n");
- return(2);
+ return(2);
}
@@ -1040,7 +1040,7 @@
addr[0x0555] = 0x00A0;
} else {
/* intel stuff */
- *addr = 0x00D0;
+ *addr = 0x00D0;
*addr = 0x0040;
}
*((vu_short *)dest) = data;
@@ -1053,7 +1053,7 @@
start = get_timer (0);
if(info->flash_id < FLASH_AMD_COMP) {
- /* AMD stuff */
+ /* AMD stuff */
while ((*((vu_short *)dest) & 0x0080) != (data & 0x0080)) {
if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
return (1);
@@ -1072,7 +1072,7 @@
if(barf & 0x0002) printf("Block locked, not erased.\n");
if(barf & 0x0010) printf("Programming error.\n");
if(barf & 0x0008) printf("Vpp Low error.\n");
- return(2);
+ return(2);
}
*addr = 0x00B0;
*addr = 0x0070;
@@ -1093,4 +1093,3 @@
/*-----------------------------------------------------------------------
*/
-