doc: board: colibri-imx8x: Update and improve documentation
Update and improve the building documentation of Colibri iMX8X.
The following changes were made:
- imx-atf repository changed to nxp-imx GitHub.
- imx-atf branch updated to 'lf_v2.6'.
- imx-seco updated to version 5.8.7.
- nxp-imx mfgtools link updated to GitHub releases.
- General writing improvements.
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
diff --git a/doc/board/toradex/colibri-imx8x.rst b/doc/board/toradex/colibri-imx8x.rst
index 9e61d98..378b259 100644
--- a/doc/board/toradex/colibri-imx8x.rst
+++ b/doc/board/toradex/colibri-imx8x.rst
@@ -20,26 +20,35 @@
Get and Build the ARM Trusted Firmware
--------------------------------------
+Download the imx-atf repository:
+
+.. code-block:: bash
+
+ $ git clone -b lf_v2.6 https://github.com/nxp-imx/imx-atf.git
+
+Compile it with an aarch64 toolchain:
+
.. code-block:: bash
- $ git clone -b toradex_imx_5.4.70_2.3.0 http://git.toradex.com/cgit/imx-atf.git/
$ make PLAT=imx8qx bl31 -C imx-atf
Get scfw_tcm.bin and ahab-container.img
---------------------------------------
+Download imx-seco firmware and extract it:
+
.. code-block:: bash
- $ wget https://github.com/toradex/i.MX-System-Controller-Firmware/raw/master/src/scfw_export_mx8qx_b0/build_mx8qx_b0/mx8qx-colibri-scfw-tcm.bin
- $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-3.8.1.bin
- $ sh imx-seco-3.8.1.bin --auto-accept
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-5.8.7.bin
+ $ sh imx-seco-5.8.7.bin --auto-accept
Copy the following firmware to the U-Boot folder:
.. code-block:: bash
- $ cp imx-atf/build/imx8qx/release/bl31.bin .
- $ cp imx-seco-3.8.1/firmware/seco/mx8qxc0-ahab-container.img mx8qx-ahab-container.img
+ $ wget https://github.com/toradex/i.MX-System-Controller-Firmware/raw/master/src/scfw_export_mx8qx_b0/build_mx8qx_b0/mx8qx-colibri-scfw-tcm.bin
+ $ cp ../imx-atf/build/imx8qx/release/bl31.bin .
+ $ cp ../imx-seco-5.8.7/firmware/seco/mx8qxc0-ahab-container.img mx8qx-ahab-container.img
Build U-Boot
------------
@@ -54,7 +63,7 @@
Get the latest version of the universal update utility (uuu) aka ``mfgtools 3.0``:
-https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases
+https://github.com/nxp-imx/mfgtools/releases
Put the module into USB recovery aka serial downloader mode, connect the USB
device to your host and execute ``uuu``: