* Patch by Travis Sawyer, 09 Feb 2004:
o 440GX:
- Fix PCI Indirect access for type 1 config cycles with ppc440.
- Add phymode for 440 enet
- fix pci pre init
o XPedite1K:
- Change board_pre_init to board_early_init_f
- Add user flash to bus controller setup
- Fix pci pre init
- Fix is_pci_host to check GPIO for monarch bit
- Force xpedite1k to pci conventional mode (via #define option)
* Patch by Brad Kemp, 4 Feb 2004:
- handle the machine check that is generated during the PCI scans
on 82xx processors.
- define the registers used in the IMMR by the PCI subsystem.
* Patch by Pierre Aubert, 03 Feb 2004:
cpu/mpc5xxx/start.S: copy MBAR into SPR311
* Patch by Jeff Angielski, 03 Feb 2004:
Fix copy & paste error in cpu/mpc8260/pci.c
* Patch by Reinhard Meyer, 24 Jan 2004:
Fix typo in cpu/mpc5xxx/pci_mpc5200.c
diff --git a/CHANGELOG b/CHANGELOG
index 4c285c3..63f5eb8 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,32 @@
Changes for U-Boot 1.0.2:
======================================================================
+* Patch by Travis Sawyer, 09 Feb 2004:
+ o 440GX:
+ - Fix PCI Indirect access for type 1 config cycles with ppc440.
+ - Add phymode for 440 enet
+ - fix pci pre init
+ o XPedite1K:
+ - Change board_pre_init to board_early_init_f
+ - Add user flash to bus controller setup
+ - Fix pci pre init
+ - Fix is_pci_host to check GPIO for monarch bit
+ - Force xpedite1k to pci conventional mode (via #define option)
+
+* Patch by Brad Kemp, 4 Feb 2004:
+ - handle the machine check that is generated during the PCI scans
+ on 82xx processors.
+ - define the registers used in the IMMR by the PCI subsystem.
+
+* Patch by Pierre Aubert, 03 Feb 2004:
+ cpu/mpc5xxx/start.S: copy MBAR into SPR311
+
+* Patch by Jeff Angielski, 03 Feb 2004:
+ Fix copy & paste error in cpu/mpc8260/pci.c
+
+* Patch by Reinhard Meyer, 24 Jan 2004:
+ Fix typo in cpu/mpc5xxx/pci_mpc5200.c
+
* Add Auto-MDIX support for INCA-IP
* Some code cleanup
diff --git a/board/xpedite1k/config.mk b/board/xpedite1k/config.mk
index c0f0da8..e42b273 100644
--- a/board/xpedite1k/config.mk
+++ b/board/xpedite1k/config.mk
@@ -22,11 +22,9 @@
#
#
-# esd ADCIOP boards
+# XES XPedite1000 PPC440GX
#
-#TEXT_BASE = 0xFFFE0000
-
ifeq ($(ramsym),1)
TEXT_BASE = 0x07FD0000
else
diff --git a/board/xpedite1k/xpedite1k.c b/board/xpedite1k/xpedite1k.c
index c025c85..d6b30b9 100644
--- a/board/xpedite1k/xpedite1k.c
+++ b/board/xpedite1k/xpedite1k.c
@@ -32,7 +32,7 @@
long int fixed_sdram (void);
-int board_pre_init (void)
+int board_early_init_f(void)
{
unsigned long sdrreg;
/* TBS: Setup the GPIO access for the user LEDs */
@@ -51,6 +51,8 @@
/* set the bus controller */
mtebc (pb0ap, 0x04055200); /* FLASH/SRAM */
mtebc (pb0cr, 0xfff18000); /* BAS=0xfff 1MB R/W 8-bit */
+ mtebc (pb1ap, 0x04055200); /* FLASH/SRAM */
+ mtebc (pb1cr, 0xfe098000); /* BAS=0xff8 16MB R/W 8-bit */
/*--------------------------------------------------------------------
* Setup the interrupt controller polarities, triggers, etc.
@@ -217,17 +219,18 @@
int pci_pre_init(struct pci_controller * hose )
{
unsigned long strap;
-
- /*--------------------------------------------------------------------------+
- * TBS:
- * The xpedite1k is a PrPMC board, however for our purposes it is the host
- *--------------------------------------------------------------------------*/
- strap = mfdcr(cpc0_strp1);
- if( (strap & 0x00100000) == 0 ){
- printf("PCI: CPC0_STRP1[PAE] not set.\n");
- return 0;
+ /* See if we're supposed to setup the pci */
+ mfsdr(sdr_sdstp1, strap);
+ if ((strap & 0x00010000) == 0) {
+ return (0);
}
+#if defined(CFG_PCI_FORCE_PCI_CONV)
+ /* Setup System Device Register PCIX0_XCR */
+ mfsdr(sdr_xcr, strap);
+ strap &= 0x0f000000;
+ mtsdr(sdr_xcr, strap);
+#endif
return 1;
}
#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
@@ -292,9 +295,7 @@
#if defined(CONFIG_PCI)
int is_pci_host(struct pci_controller *hose)
{
- /* The ebony board is always configured as host. */
- /* TBS: The xpedite1k is not necessarily the host, however for our purposes, it is. */
- return(1);
+ return ((in32(CFG_GPIO_BASE + 0x1C) & 0x00000800) == 0);
}
#endif /* defined(CONFIG_PCI) */
diff --git a/cpu/mpc5xxx/pci_mpc5200.c b/cpu/mpc5xxx/pci_mpc5200.c
index 0c2114a..94c157f 100644
--- a/cpu/mpc5xxx/pci_mpc5200.c
+++ b/cpu/mpc5xxx/pci_mpc5200.c
@@ -115,7 +115,7 @@
/* Map MBAR to PCI space */
*(vu_long *)MPC5XXX_PCI_BAR0 = CFG_MBAR;
- *(vu_long *)MPC5XXX_PCI_TBATR1 = CFG_MBAR | 1;
+ *(vu_long *)MPC5XXX_PCI_TBATR0 = CFG_MBAR | 1;
/* Map RAM to PCI space */
*(vu_long *)MPC5XXX_PCI_BAR1 = CONFIG_PCI_MEMORY_BUS | (1 << 3);
diff --git a/cpu/mpc5xxx/start.S b/cpu/mpc5xxx/start.S
index 26811e1..6f0b269 100644
--- a/cpu/mpc5xxx/start.S
+++ b/cpu/mpc5xxx/start.S
@@ -145,6 +145,8 @@
lis r3, CFG_MBAR@h
ori r3, r3, CFG_MBAR@l
#if defined(CONFIG_MPC5200)
+ /* MBAR is mirrored into the MBAR SPR */
+ mtspr MBAR,r3
rlwinm r3, r3, 16, 16, 31
#endif
#if defined(CONFIG_MGT5100)
diff --git a/cpu/mpc8260/pci.c b/cpu/mpc8260/pci.c
index b3a89f5..dc077ed 100644
--- a/cpu/mpc8260/pci.c
+++ b/cpu/mpc8260/pci.c
@@ -28,28 +28,28 @@
#include <pci.h>
#include <mpc8260.h>
#include <asm/m8260_pci.h>
-
+#include <asm/io.h>
/*
- * Local->PCI map (from CPU) controlled by
+ * Local->PCI map (from CPU) controlled by
* MPC826x master window
*
- * 0x80000000 - 0xBFFFFFFF CPU2PCI space PCIBR0
- * 0xF4000000 - 0xF7FFFFFF CPU2PCI space PCIBR1
+ * 0x80000000 - 0xBFFFFFFF CPU2PCI space PCIBR0
+ * 0xF4000000 - 0xF7FFFFFF CPU2PCI space PCIBR1
*
- * 0x80000000 - 0x9FFFFFFF 0x80000000 - 0x9FFFFFFF (Outbound ATU #1)
- * PCI Mem with prefetch
+ * 0x80000000 - 0x9FFFFFFF 0x80000000 - 0x9FFFFFFF (Outbound ATU #1)
+ * PCI Mem with prefetch
*
- * 0xA0000000 - 0xBFFFFFFF 0xA0000000 - 0xBFFFFFFF (Outbound ATU #2)
- * PCI Mem w/o prefetch
+ * 0xA0000000 - 0xBFFFFFFF 0xA0000000 - 0xBFFFFFFF (Outbound ATU #2)
+ * PCI Mem w/o prefetch
*
- * 0xF4000000 - 0xF7FFFFFF 0x00000000 - 0x03FFFFFF (Outbound ATU #3)
- * 32-bit PCI IO
+ * 0xF4000000 - 0xF7FFFFFF 0x00000000 - 0x03FFFFFF (Outbound ATU #3)
+ * 32-bit PCI IO
*
* PCI->Local map (from PCI)
- * MPC826x slave window controlled by
+ * MPC826x slave window controlled by
*
- * 0x00000000 - 0x1FFFFFFF 0x00000000 - 0x1FFFFFFF (Inbound ATU #1)
- * MPC826x local memory
+ * 0x00000000 - 0x1FFFFFFF 0x00000000 - 0x1FFFFFFF (Inbound ATU #1)
+ * MPC826x local memory
*/
/*
@@ -58,13 +58,13 @@
*/
#ifndef CFG_PCI_SLV_MEM_LOCAL
-#define PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE /* Local base */
+#define PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE /* Local base */
#else
#define PCI_SLV_MEM_LOCAL CFG_PCI_SLV_MEM_LOCAL
#endif
#ifndef CFG_PCI_SLV_MEM_BUS
-#define PCI_SLV_MEM_BUS 0x00000000 /* PCI base */
+#define PCI_SLV_MEM_BUS 0x00000000 /* PCI base */
#else
#define PCI_SLV_MEM_BUS CFG_PCI_SLV_MEM_BUS
#endif
@@ -85,28 +85,28 @@
/* PCIBR0 */
#ifndef CFG_PCI_MSTR0_LOCAL
-#define PCI_MSTR0_LOCAL 0x80000000 /* Local base */
+#define PCI_MSTR0_LOCAL 0x80000000 /* Local base */
#else
#define PCI_MSTR0_LOCAL CFG_PCI_MSTR0_LOCAL
#endif
#ifndef CFG_PCIMSK0_MASK
-#define PCIMSK0_MASK PCIMSK_1GB /* Size of window */
+#define PCIMSK0_MASK PCIMSK_1GB /* Size of window */
#else
#define PCIMSK0_MASK CFG_PCIMSK0_MASK
#endif
/* PCIBR1 */
#ifndef CFG_PCI_MSTR1_LOCAL
-#define PCI_MSTR1_LOCAL 0xF4000000 /* Local base */
+#define PCI_MSTR1_LOCAL 0xF4000000 /* Local base */
#else
#define PCI_MSTR1_LOCAL CFG_PCI_MSTR1_LOCAL
#endif
#ifndef CFG_PCIMSK1_MASK
-#define PCIMSK1_MASK PCIMSK_64MB /* Size of window */
+#define PCIMSK1_MASK PCIMSK_64MB /* Size of window */
#else
-#define PCIMSK1_MASK CFG_PCIMSK1_MASK
+#define PCIMSK1_MASK CFG_PCIMSK1_MASK
#endif
/*
@@ -116,13 +116,13 @@
*/
#ifndef CFG_PCI_MSTR_MEM_LOCAL
-#define PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */
+#define PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */
#else
#define PCI_MSTR_MEM_LOCAL CFG_PCI_MSTR_MEM_LOCAL
#endif
#ifndef CFG_PCI_MSTR_MEM_BUS
-#define PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */
+#define PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */
#else
#define PCI_MSTR_MEM_BUS CFG_PCI_MSTR_MEM_BUS
#endif
@@ -134,7 +134,7 @@
#endif
#ifndef CFG_PCI_MSTR_MEM_SIZE
-#define PCI_MSTR_MEM_SIZE 0x10000000 /* 256MB */
+#define PCI_MSTR_MEM_SIZE 0x10000000 /* 256MB */
#else
#define PCI_MSTR_MEM_SIZE CFG_PCI_MSTR_MEM_SIZE
#endif
@@ -152,13 +152,13 @@
*/
#ifndef CFG_PCI_MSTR_MEMIO_LOCAL
-#define PCI_MSTR_MEMIO_LOCAL 0x90000000 /* Local base */
+#define PCI_MSTR_MEMIO_LOCAL 0x90000000 /* Local base */
#else
#define PCI_MSTR_MEMIO_LOCAL CFG_PCI_MSTR_MEMIO_LOCAL
#endif
#ifndef CFG_PCI_MSTR_MEMIO_BUS
-#define PCI_MSTR_MEMIO_BUS 0x90000000 /* PCI base */
+#define PCI_MSTR_MEMIO_BUS 0x90000000 /* PCI base */
#else
#define PCI_MSTR_MEMIO_BUS CFG_PCI_MSTR_MEMIO_BUS
#endif
@@ -170,13 +170,13 @@
#endif
#ifndef CFG_PCI_MSTR_MEMIO_SIZE
-#define PCI_MSTR_MEMIO_SIZE 0x10000000 /* 256 MB */
+#define PCI_MSTR_MEMIO_SIZE 0x10000000 /* 256 MB */
#else
#define PCI_MSTR_MEMIO_SIZE CFG_PCI_MSTR_MEMIO_SIZE
#endif
#ifndef CFG_POCMR1_MASK_ATTRIB
-#define POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE)
+#define POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE)
#else
#define POCMR1_MASK_ATTRIB CFG_POCMR1_MASK_ATTRIB
#endif
@@ -188,13 +188,13 @@
*/
#ifndef CFG_PCI_MSTR_IO_LOCAL
-#define PCI_MSTR_IO_LOCAL 0xA0000000 /* Local base */
+#define PCI_MSTR_IO_LOCAL 0xA0000000 /* Local base */
#else
#define PCI_MSTR_IO_LOCAL CFG_PCI_MSTR_IO_LOCAL
#endif
#ifndef CFG_PCI_MSTR_IO_BUS
-#define PCI_MSTR_IO_BUS 0xA0000000 /* PCI base */
+#define PCI_MSTR_IO_BUS 0xA0000000 /* PCI base */
#else
#define PCI_MSTR_IO_BUS CFG_PCI_MSTR_IO_BUS
#endif
@@ -206,13 +206,13 @@
#endif
#ifndef CFG_PCI_MSTR_IO_SIZE
-#define PCI_MSTR_IO_SIZE 0x10000000 /* 256MB */
+#define PCI_MSTR_IO_SIZE 0x10000000 /* 256MB */
#else
#define PCI_MSTR_IO_SIZE CFG_PCI_MSTR_IO_SIZE
#endif
#ifndef CFG_POCMR2_MASK_ATTRIB
-#define POCMR2_MASK_ATTRIB (POCMR_MASK_256MB | POCMR_ENABLE | POCMR_PCI_IO)
+#define POCMR2_MASK_ATTRIB (POCMR_MASK_256MB | POCMR_ENABLE | POCMR_PCI_IO)
#else
#define POCMR2_MASK_ATTRIB CFG_POCMR2_MASK_ATTRIB
#endif
@@ -223,193 +223,198 @@
#define PCI_CLASS_BRIDGE_CTLR 0x06
-static inline void pci_outl(u32 addr, u32 data)
+static inline void pci_outl (u32 addr, u32 data)
{
- *(volatile u32 *) addr = cpu_to_le32(data);
+ *(volatile u32 *) addr = cpu_to_le32 (data);
}
-void pci_mpc8250_init(struct pci_controller *hose)
+void pci_mpc8250_init (struct pci_controller *hose)
{
#ifdef CONFIG_MPC8266ADS
- DECLARE_GLOBAL_DATA_PTR;
+ DECLARE_GLOBAL_DATA_PTR;
#endif
- u16 tempShort;
- u32 immr_addr = CFG_IMMR;
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
- pci_dev_t host_devno = PCI_BDF(0, 0, 0);
+ u16 tempShort;
+
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ pci_dev_t host_devno = PCI_BDF (0, 0, 0);
- pci_setup_indirect(hose, CFG_IMMR + PCI_CFG_ADDR_REG,
- CFG_IMMR + PCI_CFG_DATA_REG);
+ pci_setup_indirect (hose, CFG_IMMR + PCI_CFG_ADDR_REG,
+ CFG_IMMR + PCI_CFG_DATA_REG);
- /*
- * Setting required to enable local bus for PCI (SIUMCR [LBPC]).
- */
+ /*
+ * Setting required to enable local bus for PCI (SIUMCR [LBPC]).
+ */
#ifdef CONFIG_MPC8266ADS
- immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11)
- | SIUMCR_LBPC01;
+ immap->im_siu_conf.sc_siumcr =
+ (immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11)
+ | SIUMCR_LBPC01;
#else
- /*
- * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
- * and local bus for PCI (SIUMCR [LBPC]).
- */
- immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
- ~SIUMCR_LBPC11 &
+ /*
+ * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
+ * and local bus for PCI (SIUMCR [LBPC]).
+ */
+ immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
+ ~SIUMCR_LBPC11 &
~SIUMCR_CS10PC11 &
- ~SIUMCR_LBPC11) |
- SIUMCR_LBPC01 |
- SIUMCR_CS10PC01 |
- SIUMCR_LBPC01;
+ ~SIUMCR_LBPC11) |
+ SIUMCR_LBPC01 |
+ SIUMCR_CS10PC01 |
+ SIUMCR_APPC10;
#endif
- /* Make PCI lowest priority */
- /* Each 4 bits is a device bus request and the MS 4bits
- is highest priority */
- /* Bus 4bit value
- --- ----------
- CPM high 0b0000
- CPM middle 0b0001
- CPM low 0b0010
- PCI reguest 0b0011
- Reserved 0b0100
- Reserved 0b0101
- Internal Core 0b0110
- External Master 1 0b0111
- External Master 2 0b1000
- External Master 3 0b1001
- The rest are reserved */
- immap->im_siu_conf.sc_ppc_alrh = 0x61207893;
+ /* Make PCI lowest priority */
+ /* Each 4 bits is a device bus request and the MS 4bits
+ is highest priority */
+ /* Bus 4bit value
+ --- ----------
+ CPM high 0b0000
+ CPM middle 0b0001
+ CPM low 0b0010
+ PCI reguest 0b0011
+ Reserved 0b0100
+ Reserved 0b0101
+ Internal Core 0b0110
+ External Master 1 0b0111
+ External Master 2 0b1000
+ External Master 3 0b1001
+ The rest are reserved */
+ immap->im_siu_conf.sc_ppc_alrh = 0x61207893;
- /* Park bus on core while modifying PCI Bus accesses */
- immap->im_siu_conf.sc_ppc_acr = 0x6;
+ /* Park bus on core while modifying PCI Bus accesses */
+ immap->im_siu_conf.sc_ppc_acr = 0x6;
- /*
- * Set up master windows that allow the CPU to access PCI space. These
- * windows are set up using the two SIU PCIBR registers.
- */
- *(volatile unsigned long*)(immr_addr + M8265_PCIMSK0) = PCIMSK0_MASK;
- *(volatile unsigned long*)(immr_addr + M8265_PCIBR0) =
- PCI_MSTR0_LOCAL | PCIBR_ENABLE;
+ /*
+ * Set up master windows that allow the CPU to access PCI space. These
+ * windows are set up using the two SIU PCIBR registers.
+ */
+ immap->im_memctl.memc_pcimsk0 = PCIMSK0_MASK;
+ immap->im_memctl.memc_pcibr0 = PCI_MSTR0_LOCAL | PCIBR_ENABLE;
#ifdef CONFIG_MPC8266ADS
- *(volatile unsigned long*)(immr_addr + M8265_PCIMSK1) = PCIMSK1_MASK;
- *(volatile unsigned long*)(immr_addr + M8265_PCIBR1) =
- PCI_MSTR1_LOCAL | PCIBR_ENABLE;
+ immap->im_memctl.memc_pcimsk0 = PCIMSK1_MASK;
+ immap->im_memctl.memc_pcibr0 = PCI_MSTR1_LOCAL | PCIBR_ENABLE;
#endif
- /* Release PCI RST (by default the PCI RST signal is held low) */
- pci_outl (immr_addr | PCI_GCR_REG, PCIGCR_PCI_BUS_EN);
+ /* Release PCI RST (by default the PCI RST signal is held low) */
+ immap->im_pci.pci_gcr = cpu_to_le32 (PCIGCR_PCI_BUS_EN);
- /* give it some time */
- {
+ /* give it some time */
+ {
#ifdef CONFIG_MPC8266ADS
/* Give the PCI cards more time to initialize before query
- This might be good for other boards also
- */
- int i;
- for (i = 0; i < 1000; ++i)
+ This might be good for other boards also
+ */
+ int i;
+
+ for (i = 0; i < 1000; ++i)
#endif
- udelay(1000);
- }
+ udelay (1000);
+ }
- /*
- * Set up master window that allows the CPU to access PCI Memory (prefetch)
- * space. This window is set up using the first set of Outbound ATU registers.
- */
- pci_outl (immr_addr | POTAR_REG0, PCI_MSTR_MEM_BUS >> 12); /* PCI base */
- pci_outl (immr_addr | POBAR_REG0, PCI_MSTR_MEM_LOCAL >> 12); /* Local base */
- pci_outl (immr_addr | POCMR_REG0, POCMR0_MASK_ATTRIB); /* Size & attribute */
+ /*
+ * Set up master window that allows the CPU to access PCI Memory (prefetch)
+ * space. This window is set up using the first set of Outbound ATU registers.
+ */
+ immap->im_pci.pci_potar0 = cpu_to_le32 (PCI_MSTR_MEM_BUS >> 12); /* PCI base */
+ immap->im_pci.pci_pobar0 = cpu_to_le32 (PCI_MSTR_MEM_LOCAL >> 12); /* Local base */
+ immap->im_pci.pci_pocmr0 = cpu_to_le32 (POCMR0_MASK_ATTRIB); /* Size & attribute */
- /*
- * Set up master window that allows the CPU to access PCI Memory (non-prefetch)
- * space. This window is set up using the second set of Outbound ATU registers.
- */
- pci_outl (immr_addr | POTAR_REG1, PCI_MSTR_MEMIO_BUS >> 12); /* PCI base */
- pci_outl (immr_addr | POBAR_REG1, PCI_MSTR_MEMIO_LOCAL >> 12); /* Local base */
- pci_outl (immr_addr | POCMR_REG1, POCMR1_MASK_ATTRIB); /* Size & attribute */
+ /*
+ * Set up master window that allows the CPU to access PCI Memory (non-prefetch)
+ * space. This window is set up using the second set of Outbound ATU registers.
+ */
+ immap->im_pci.pci_potar1 = cpu_to_le32 (PCI_MSTR_MEMIO_BUS >> 12); /* PCI base */
+ immap->im_pci.pci_pobar1 = cpu_to_le32 (PCI_MSTR_MEMIO_LOCAL >> 12); /* Local base */
+ immap->im_pci.pci_pocmr1 = cpu_to_le32 (POCMR1_MASK_ATTRIB); /* Size & attribute */
- /*
- * Set up master window that allows the CPU to access PCI IO space. This window
- * is set up using the third set of Outbound ATU registers.
- */
- pci_outl (immr_addr | POTAR_REG2, PCI_MSTR_IO_BUS >> 12); /* PCI base */
- pci_outl (immr_addr | POBAR_REG2, PCI_MSTR_IO_LOCAL >> 12); /* Local base */
- pci_outl (immr_addr | POCMR_REG2, POCMR2_MASK_ATTRIB); /* Size & attribute */
+ /*
+ * Set up master window that allows the CPU to access PCI IO space. This window
+ * is set up using the third set of Outbound ATU registers.
+ */
+ immap->im_pci.pci_potar2 = cpu_to_le32 (PCI_MSTR_IO_BUS >> 12); /* PCI base */
+ immap->im_pci.pci_pobar2 = cpu_to_le32 (PCI_MSTR_IO_LOCAL >> 12); /* Local base */
+ immap->im_pci.pci_pocmr2 = cpu_to_le32 (POCMR2_MASK_ATTRIB); /* Size & attribute */
- /*
- * Set up slave window that allows PCI masters to access MPC826x local memory.
- * This window is set up using the first set of Inbound ATU registers
- */
- pci_outl (immr_addr | PITAR_REG0, PCI_SLV_MEM_LOCAL >> 12); /* Local base */
- pci_outl (immr_addr | PIBAR_REG0, PCI_SLV_MEM_BUS >> 12); /* PCI base */
- pci_outl (immr_addr | PICMR_REG0, PICMR0_MASK_ATTRIB); /* Size & attribute */
+ /*
+ * Set up slave window that allows PCI masters to access MPC826x local memory.
+ * This window is set up using the first set of Inbound ATU registers
+ */
+ immap->im_pci.pci_pitar0 = cpu_to_le32 (PCI_SLV_MEM_LOCAL >> 12); /* PCI base */
+ immap->im_pci.pci_pibar0 = cpu_to_le32 (PCI_SLV_MEM_BUS >> 12); /* Local base */
+ immap->im_pci.pci_picmr0 = cpu_to_le32 (PICMR0_MASK_ATTRIB); /* Size & attribute */
- /* See above for description - puts PCI request as highest priority */
- immap->im_siu_conf.sc_ppc_alrh = 0x03124567;
+ /* See above for description - puts PCI request as highest priority */
+ immap->im_siu_conf.sc_ppc_alrh = 0x03124567;
- /* Park the bus on the PCI */
- immap->im_siu_conf.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
+ /* Park the bus on the PCI */
+ immap->im_siu_conf.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
- /* Host mode - specify the bridge as a host-PCI bridge */
+ /* Host mode - specify the bridge as a host-PCI bridge */
- pci_hose_write_config_byte(hose, host_devno, PCI_CLASS_CODE,
- PCI_CLASS_BRIDGE_CTLR);
+ pci_hose_write_config_byte (hose, host_devno, PCI_CLASS_CODE,
+ PCI_CLASS_BRIDGE_CTLR);
- /* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */
- pci_hose_read_config_word(hose, host_devno, PCI_COMMAND, &tempShort);
- pci_hose_write_config_word(hose, host_devno, PCI_COMMAND,
- tempShort | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+ /* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */
+ pci_hose_read_config_word (hose, host_devno, PCI_COMMAND, &tempShort);
+ pci_hose_write_config_word (hose, host_devno, PCI_COMMAND,
+ tempShort | PCI_COMMAND_MASTER |
+ PCI_COMMAND_MEMORY);
-#ifdef CONFIG_MPC8266ADS
/* do some bridge init, should be done on all 8260 based bridges */
- pci_hose_write_config_byte(hose, host_devno, PCI_CACHE_LINE_SIZE, 0x08);
- pci_hose_write_config_byte(hose, host_devno, PCI_LATENCY_TIMER, 0xF8);
-#endif
+ pci_hose_write_config_byte (hose, host_devno, PCI_CACHE_LINE_SIZE,
+ 0x08);
+ pci_hose_write_config_byte (hose, host_devno, PCI_LATENCY_TIMER,
+ 0xF8);
- hose->first_busno = 0;
- hose->last_busno = 0xff;
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
- /* System memory space */
+ /* System memory space */
#ifdef CONFIG_MPC8266ADS
- pci_set_region(hose->regions + 0,
- PCI_SLV_MEM_BUS,
- PCI_SLV_MEM_LOCAL,
- gd->ram_size,
- PCI_REGION_MEM | PCI_REGION_MEMORY);
+ pci_set_region (hose->regions + 0,
+ PCI_SLV_MEM_BUS,
+ PCI_SLV_MEM_LOCAL,
+ gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY);
#else
- pci_set_region(hose->regions + 0,
- CFG_SDRAM_BASE,
- CFG_SDRAM_BASE,
- 0x4000000,
- PCI_REGION_MEM | PCI_REGION_MEMORY);
+ pci_set_region (hose->regions + 0,
+ CFG_SDRAM_BASE,
+ CFG_SDRAM_BASE,
+ 0x4000000, PCI_REGION_MEM | PCI_REGION_MEMORY);
#endif
- /* PCI memory space */
+ /* PCI memory space */
#ifdef CONFIG_MPC8266ADS
- pci_set_region(hose->regions + 1,
- PCI_MSTR_MEMIO_BUS,
- PCI_MSTR_MEMIO_LOCAL,
- PCI_MSTR_MEMIO_SIZE,
- PCI_REGION_MEM);
+ pci_set_region (hose->regions + 1,
+ PCI_MSTR_MEMIO_BUS,
+ PCI_MSTR_MEMIO_LOCAL,
+ PCI_MSTR_MEMIO_SIZE, PCI_REGION_MEM);
#else
- pci_set_region(hose->regions + 1,
- PCI_MSTR_MEM_BUS,
- PCI_MSTR_MEM_LOCAL,
- PCI_MSTR_MEM_SIZE,
- PCI_REGION_MEM);
+ pci_set_region (hose->regions + 1,
+ PCI_MSTR_MEM_BUS,
+ PCI_MSTR_MEM_LOCAL,
+ PCI_MSTR_MEM_SIZE, PCI_REGION_MEM);
#endif
+ /* PCI I/O space */
+ pci_set_region (hose->regions + 2,
+ PCI_MSTR_IO_BUS,
+ PCI_MSTR_IO_LOCAL, PCI_MSTR_IO_SIZE, PCI_REGION_IO);
+
- /* PCI I/O space */
- pci_set_region(hose->regions + 2,
- PCI_MSTR_IO_BUS,
- PCI_MSTR_IO_LOCAL,
- PCI_MSTR_IO_SIZE,
- PCI_REGION_IO);
+ hose->region_count = 3;
- hose->region_count = 3;
+ pci_register_hose (hose);
+ /* Mask off master abort machine checks */
+ immap->im_pci.pci_emr &= cpu_to_le32 (~PCI_ERROR_PCI_NO_RSP);
+ eieio ();
- pci_register_hose(hose);
+ hose->last_busno = pci_hose_scan (hose);
- hose->last_busno = pci_hose_scan(hose);
+
+ /* clear the error in the error status register */
+ immap->im_pci.pci_esr = cpu_to_le32 (PCI_ERROR_PCI_NO_RSP);
+
+ /* unmask master abort machine checks */
+ immap->im_pci.pci_emr |= cpu_to_le32 (PCI_ERROR_PCI_NO_RSP);
}
-#endif /* CONFIG_PCI */
+#endif /* CONFIG_PCI */
diff --git a/cpu/mpc8260/traps.c b/cpu/mpc8260/traps.c
index a7f6f7e..deab808 100644
--- a/cpu/mpc8260/traps.c
+++ b/cpu/mpc8260/traps.c
@@ -35,6 +35,7 @@
#include <common.h>
#include <command.h>
#include <asm/processor.h>
+#include <asm/m8260_pci.h>
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
int (*debugger_exception_handler)(struct pt_regs *) = 0;
@@ -86,14 +87,12 @@
printf("\n");
for (i = 0; i < 32; i++) {
- if ((i % 8) == 0)
- {
+ if ((i % 8) == 0) {
printf("GPR%02d: ", i);
}
printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7)
- {
+ if ((i % 8) == 7) {
printf("\n");
}
}
@@ -108,6 +107,24 @@
panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
}
+#ifdef CONFIG_PCI
+void dump_pci (void)
+{
+
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+
+ printf ("PCI: err status %x err mask %x err ctrl %x\n",
+ le32_to_cpu (immap->im_pci.pci_esr),
+ le32_to_cpu (immap->im_pci.pci_emr),
+ le32_to_cpu (immap->im_pci.pci_ecr));
+ printf (" error address %x error data %x ctrl %x\n",
+ le32_to_cpu (immap->im_pci.pci_eacr),
+ le32_to_cpu (immap->im_pci.pci_edcr),
+ le32_to_cpu (immap->im_pci.pci_eccr));
+
+}
+#endif
+
void
MachineCheckException(struct pt_regs *regs)
{
@@ -117,6 +134,17 @@
* when a device is not present. Catch it and return to
* the PCI exception handler.
*/
+#ifdef CONFIG_PCI
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+#ifdef DEBUG
+ dump_pci();
+#endif
+ /* clear the error in the error status register */
+ if(immap->im_pci.pci_esr && cpu_to_le32(PCI_ERROR_PCI_NO_RSP)) {
+ immap->im_pci.pci_esr = cpu_to_le32(PCI_ERROR_PCI_NO_RSP);
+ return;
+ }
+#endif
if ((fixup = search_exception_table(regs->nip)) != 0) {
regs->nip = fixup;
return;
@@ -130,8 +158,7 @@
printf("Machine check in kernel mode.\n");
printf("Caused by (from msr): ");
printf("regs %p ",regs);
- switch( regs->msr & 0x0000F000)
- {
+ switch( regs->msr & 0x0000F000) {
case (1<<12) :
printf("Machine check signal - probably due to mm fault\n"
"with mmu off\n");
@@ -150,6 +177,9 @@
}
show_regs(regs);
print_backtrace((unsigned long *)regs->gpr[1]);
+#ifdef CONFIG_PCI
+ dump_pci();
+#endif
panic("machine check");
}
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c
index d3f6b23..c9e2e9c 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/405gp_pci.c
@@ -411,15 +411,23 @@
/*--------------------------------------------------------------------------+
* The PCI initialization sequence enable bit must be set ... if not abort
- * pci setup since updating the bit requires chip reset.
+ * pci setup since updating the bit requires chip reset.
*--------------------------------------------------------------------------*/
- strap = mfdcr(cpc0_strp1);
- if( (strap & 0x00040000) == 0 ){
- printf("PCI: CPC0_STRP1[PISE] not set.\n");
- printf("PCI: Configuration aborted.\n");
- return;
- }
-
+#if defined (CONFIG_440_GX)
+ mfsdr(sdr_sdstp1,strap);
+ if ( (strap & 0x00010000) == 0 ){
+ printf("PCI: SDR0_STRP1[PISE] not set.\n");
+ printf("PCI: Configuration aborted.\n");
+ return;
+ }
+#else
+ strap = mfdcr(cpc0_strp1);
+ if( (strap & 0x00040000) == 0 ){
+ printf("PCI: CPC0_STRP1[PISE] not set.\n");
+ printf("PCI: Configuration aborted.\n");
+ return;
+ }
+#endif
/*--------------------------------------------------------------------------+
* PCI controller init
*--------------------------------------------------------------------------*/
@@ -463,8 +471,13 @@
out16r( PCIX0_CLS, 0x00060000 ); /* Bridge, host bridge */
#endif
- out32r( PCIX0_BRDGOPT1, 0x10000060 ); /* PLB Rq pri highest */
- out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 1 ); /* Enable host config */
+#if defined(CONFIG_440_GX)
+ out32r( PCIX0_BRDGOPT1, 0x04000060 ); /* PLB Rq pri highest */
+ out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 0x83 ); /* Enable host config, clear Timeout, ensure int src1 */
+#else
+ out32r( PCIX0_BRDGOPT1, 0x10000060 ); /* PLB Rq pri highest */
+ out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 1 ); /* Enable host config */
+#endif
/*--------------------------------------------------------------------------+
* PCI master init: default is one 256MB region for PCI memory:
diff --git a/cpu/ppc4xx/440gx_enet.c b/cpu/ppc4xx/440gx_enet.c
index 617a174..4502085 100644
--- a/cpu/ppc4xx/440gx_enet.c
+++ b/cpu/ppc4xx/440gx_enet.c
@@ -116,6 +116,10 @@
#undef INFO_440_ENET
+#define BI_PHYMODE_NONE 0
+#define BI_PHYMODE_ZMII 1
+#define BI_PHYMODE_RGMII 2
+
/*-----------------------------------------------------------------------------+
* Global variables. TX and RX descriptors and buffers.
*-----------------------------------------------------------------------------*/
@@ -316,11 +320,12 @@
break;
}
+ bis->bi_phynum[devnum] = reg;
+
/* Reset the phy */
miiphy_reset (reg);
/* Start/Restart autonegotiation */
-/* miiphy_write(reg, PHY_BMCR, 0x9340); */
phy_setup_aneg (reg);
udelay (1000);
@@ -579,13 +584,6 @@
irq_install_handler (VECNUM_ETH0 + (hw_p->devnum * 2),
(interrupt_handler_t *) enetInt, dev);
}
-#if 0 /* done by irq_install_handler */
- /* set up interrupt handler */
- /* setup interrupt controller to take interrupts from the MAL &
- EMAC */
- mtdcr (uicsr, 0xffffffff); /* clear pending interrupts */
- mtdcr (uicer, mfdcr (uicer) | MAL_UIC_DEF | EMAC_UIC_DEF);
-#endif
mtmsr (msr); /* enable interrupts again */
@@ -1027,33 +1025,49 @@
pfc1 &= ~(0x01e00000);
pfc1 |= 0x01200000;
mtsdr (sdr_pfc1, pfc1);
+ /* set phy num and mode */
+ bis->bi_phynum[0] = CONFIG_PHY_ADDR;
+ bis->bi_phynum[1] = CONFIG_PHY1_ADDR;
+ bis->bi_phynum[2] = CONFIG_PHY2_ADDR;
+ bis->bi_phynum[3] = CONFIG_PHY3_ADDR;
+ bis->bi_phymode[0] = 0;
+ bis->bi_phymode[1] = 0;
+ bis->bi_phymode[2] = 2;
+ bis->bi_phymode[3] = 2;
for (eth_num = 0; eth_num < EMAC_NUM_DEV; eth_num++) {
/* See if we can actually bring up the interface, otherwise, skip it */
switch (eth_num) {
case 0:
- if (memcmp (bis->bi_enetaddr, "\0\0\0\0\0\0", 6) == 0)
+ if (memcmp (bis->bi_enetaddr, "\0\0\0\0\0\0", 6) == 0) {
+ bis->bi_phymode[eth_num] = BI_PHYMODE_NONE;
continue;
+ }
break;
case 1:
- if (memcmp (bis->bi_enet1addr, "\0\0\0\0\0\0", 6) ==
- 0)
+ if (memcmp (bis->bi_enet1addr, "\0\0\0\0\0\0", 6) == 0) {
+ bis->bi_phymode[eth_num] = BI_PHYMODE_NONE;
continue;
+ }
break;
case 2:
- if (memcmp (bis->bi_enet2addr, "\0\0\0\0\0\0", 6) ==
- 0)
+ if (memcmp (bis->bi_enet2addr, "\0\0\0\0\0\0", 6) == 0) {
+ bis->bi_phymode[eth_num] = BI_PHYMODE_NONE;
continue;
+ }
break;
case 3:
- if (memcmp (bis->bi_enet3addr, "\0\0\0\0\0\0", 6) ==
- 0)
+ if (memcmp (bis->bi_enet3addr, "\0\0\0\0\0\0", 6) == 0) {
+ bis->bi_phymode[eth_num] = BI_PHYMODE_NONE;
continue;
+ }
break;
default:
- if (memcmp (bis->bi_enetaddr, "\0\0\0\0\0\0", 6) == 0)
+ if (memcmp (bis->bi_enetaddr, "\0\0\0\0\0\0", 6) == 0) {
+ bis->bi_phymode[eth_num] = BI_PHYMODE_NONE;
continue;
+ }
break;
}
diff --git a/drivers/inca-ip_sw.c b/drivers/inca-ip_sw.c
index 42edca8..c76b344 100644
--- a/drivers/inca-ip_sw.c
+++ b/drivers/inca-ip_sw.c
@@ -69,7 +69,7 @@
/************************ Auto MDIX settings ************************/
#define INCA_IP_AUTO_MDIX_LAN_PORTS_DIR INCA_IP_Ports_P1_DIR
-#define INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL INCA_IP_Ports_P1_ALTSEL
+#define INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL INCA_IP_Ports_P1_ALTSEL
#define INCA_IP_AUTO_MDIX_LAN_PORTS_OUT INCA_IP_Ports_P1_OUT
#define INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX 16
@@ -173,7 +173,7 @@
inca_dma_init();
inca_init_switch_chip();
-
+
inca_amdix();
sprintf(dev->name, "INCA-IP Switch");
diff --git a/drivers/pci_auto.c b/drivers/pci_auto.c
index 3965f13..3f26886 100644
--- a/drivers/pci_auto.c
+++ b/drivers/pci_auto.c
@@ -46,16 +46,14 @@
{
unsigned long addr;
- if (!res)
- {
+ if (!res) {
DEBUGF("No resource");
goto error;
}
addr = ((res->bus_lower - 1) | (size - 1)) + 1;
- if (addr - res->bus_start + size > res->size)
- {
+ if (addr - res->bus_start + size > res->size) {
DEBUGF("No room in resource");
goto error;
}
@@ -90,8 +88,7 @@
pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);
cmdstat = (cmdstat & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) | PCI_COMMAND_MASTER;
- for (bar = PCI_BASE_ADDRESS_0; bar <= PCI_BASE_ADDRESS_0 + (bars_num*4); bar += 4)
- {
+ for (bar = PCI_BASE_ADDRESS_0; bar <= PCI_BASE_ADDRESS_0 + (bars_num*4); bar += 4) {
/* Tickle the BAR and get the response */
pci_hose_write_config_dword(hose, dev, bar, 0xffffffff);
pci_hose_read_config_dword(hose, dev, bar, &bar_response);
@@ -103,15 +100,12 @@
found_mem64 = 0;
/* Check the BAR type and set our address mask */
- if (bar_response & PCI_BASE_ADDRESS_SPACE)
- {
+ if (bar_response & PCI_BASE_ADDRESS_SPACE) {
bar_size = ~(bar_response & PCI_BASE_ADDRESS_IO_MASK) + 1;
bar_res = io;
DEBUGF("PCI Autoconfig: BAR %d, I/O, size=0x%x, ", bar_nr, bar_size);
- }
- else
- {
+ } else {
if ( (bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
PCI_BASE_ADDRESS_MEM_TYPE_64)
found_mem64 = 1;
@@ -122,8 +116,7 @@
DEBUGF("PCI Autoconfig: BAR %d, Mem, size=0x%x, ", bar_nr, bar_size);
}
- if (pciauto_region_allocate(bar_res, bar_size, &bar_value) == 0)
- {
+ if (pciauto_region_allocate(bar_res, bar_size, &bar_value) == 0) {
/* Write it out and update our limit */
pci_hose_write_config_dword(hose, dev, bar, bar_value);
@@ -132,8 +125,7 @@
* upper 32 bits of the bar and force it to locate
* in the lower 4GB of memory.
*/
- if (found_mem64)
- {
+ if (found_mem64) {
bar += 4;
pci_hose_write_config_dword(hose, dev, bar, 0x00000000);
}
@@ -163,12 +155,10 @@
/* Configure bus number registers */
pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS, PCI_BUS(dev));
- /* TBS: passed in sub_bus is correct, removed the +1 */
pci_hose_write_config_byte(hose, dev, PCI_SECONDARY_BUS, sub_bus);
pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, 0xff);
- if (pci_mem)
- {
+ if (pci_mem) {
/* Round memory allocator to 1MB boundary */
pciauto_region_align(pci_mem, 0x100000);
@@ -179,8 +169,7 @@
cmdstat |= PCI_COMMAND_MEMORY;
}
- if (pci_io)
- {
+ if (pci_io) {
/* Round I/O allocator to 4KB boundary */
pciauto_region_align(pci_io, 0x1000);
@@ -209,8 +198,7 @@
/* Configure bus number registers */
pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, sub_bus);
- if (pci_mem)
- {
+ if (pci_mem) {
/* Round memory allocator to 1MB boundary */
pciauto_region_align(pci_mem, 0x100000);
@@ -218,8 +206,7 @@
(pci_mem->bus_lower-1) >> 16);
}
- if (pci_io)
- {
+ if (pci_io) {
/* Round I/O allocator to 4KB boundary */
pciauto_region_align(pci_io, 0x1000);
@@ -240,10 +227,8 @@
hose->pci_io = hose->pci_mem = NULL;
- for (i=0; i<hose->region_count; i++)
- {
- switch(hose->regions[i].flags)
- {
+ for (i=0; i<hose->region_count; i++) {
+ switch(hose->regions[i].flags) {
case PCI_REGION_IO:
if (!hose->pci_io ||
hose->pci_io->size < hose->regions[i].size)
@@ -258,8 +243,7 @@
}
- if (hose->pci_mem)
- {
+ if (hose->pci_mem) {
pciauto_region_init(hose->pci_mem);
DEBUGF("PCI Autoconfig: Memory region: [%lx-%lx]\n",
@@ -267,8 +251,7 @@
hose->pci_mem->bus_start + hose->pci_mem->size - 1);
}
- if (hose->pci_io)
- {
+ if (hose->pci_io) {
pciauto_region_init(hose->pci_io);
DEBUGF("PCI Autoconfig: I/O region: [%lx-%lx]\n",
@@ -289,23 +272,22 @@
pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
- switch(class)
- {
+ switch(class) {
case PCI_CLASS_BRIDGE_PCI:
hose->current_busno++;
pciauto_setup_device(hose, dev, 2, hose->pci_mem, hose->pci_io);
DEBUGF("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_DEV(dev));
- /* TBS: Passing in current_busno allows for sibling P2P bridges */
+ /* Passing in current_busno allows for sibling P2P bridges */
pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
/*
- * TBS: need to figure out if this is a subordinate bridge on the bus
+ * need to figure out if this is a subordinate bridge on the bus
* to be able to properly set the pri/sec/sub bridge registers.
*/
n = pci_hose_scan_bus(hose, hose->current_busno);
- /* TBS: figure out the deepest we've gone for this leg */
+ /* figure out the deepest we've gone for this leg */
sub_bus = max(n, sub_bus);
pciauto_postscan_setup_bridge(hose, dev, sub_bus);
@@ -314,11 +296,10 @@
case PCI_CLASS_STORAGE_IDE:
pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prg_iface);
- if (!(prg_iface & PCIAUTO_IDE_MODE_MASK))
- {
- DEBUGF("PCI Autoconfig: Skipping legacy mode IDE controller\n");
- return sub_bus;
- }
+ if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
+ DEBUGF("PCI Autoconfig: Skipping legacy mode IDE controller\n");
+ return sub_bus;
+ }
pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_io);
break;
@@ -327,8 +308,7 @@
/* just do a minimal setup of the bridge, let the OS take care of the rest */
pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_io);
- DEBUGF("PCI Autoconfig: Found P2CardBus bridge, device %d\n",
- PCI_DEV(dev));
+ DEBUGF("PCI Autoconfig: Found P2CardBus bridge, device %d\n", PCI_DEV(dev));
hose->current_busno++;
break;
diff --git a/drivers/pci_indirect.c b/drivers/pci_indirect.c
index 7dc17a7..0368681 100644
--- a/drivers/pci_indirect.c
+++ b/drivers/pci_indirect.c
@@ -43,6 +43,19 @@
cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \
return 0; \
}
+#elif defined(CONFIG_440_GX)
+#define INDIRECT_PCI_OP(rw, size, type, op, mask) \
+static int \
+indirect_##rw##_config_##size(struct pci_controller *hose, \
+ pci_dev_t dev, int offset, type val) \
+{ \
+ if (PCI_BUS(dev) > 0) \
+ out_le32(hose->cfg_addr, dev | (offset & 0xfc) | 0x80000001); \
+ else \
+ out_le32(hose->cfg_addr, dev | (offset & 0xfc) | 0x80000000); \
+ cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \
+ return 0; \
+}
#else
#define INDIRECT_PCI_OP(rw, size, type, op, mask) \
static int \
diff --git a/include/asm-ppc/immap_8260.h b/include/asm-ppc/immap_8260.h
index c61cc4f..407cf49 100644
--- a/include/asm-ppc/immap_8260.h
+++ b/include/asm-ppc/immap_8260.h
@@ -1,18 +1,17 @@
-
/*
* MPC8260 Internal Memory Map
* Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
*
- * The Internal Memory Map of the 8260. I don't know how generic
+ * The Internal Memory Map of the 8260. I don't know how generic
* this will be, as I don't have any knowledge of the subsequent
- * parts at this time. I copied this from the 8xx_immap.h.
+ * parts at this time. I copied this from the 8xx_immap.h.
*/
#ifndef __IMMAP_82XX__
#define __IMMAP_82XX__
/* System configuration registers.
*/
-typedef struct sys_conf {
+typedef struct sys_conf {
uint sc_siumcr;
uint sc_sypcr;
char res1[6];
@@ -89,7 +88,12 @@
u_char memc_lsrt;
char res9[3];
uint memc_immr;
- char res10[84];
+ uint memc_pcibr0;
+ uint memc_pcibr1;
+ char res10[16];
+ uint memc_pcimsk0;
+ uint memc_pcimsk1;
+ char res11[52];
} memctl8260_t;
/* System Integration Timers.
@@ -107,9 +111,136 @@
uint sit_pitc;
uint sit_pitr;
char res6[94];
- char res7[2390];
+ char res7[390];
} sit8260_t;
+/* PCI
+ */
+typedef struct pci_config {
+ uint pci_omisr;
+ uint pci_ominr;
+ char res1[8];
+ uint pci_ifqpr;
+ uint pci_ofqpr;
+ char res2[8];
+ uint pci_imr0;
+ uint pci_imr1;
+ uint pci_omr0;
+ uint pci_omr1;
+ uint pci_odr;
+ char res3[4];
+ uint pci_idr;
+ char res4[20];
+ uint pci_imisr;
+ uint pci_imimr;
+ char res5[24];
+ uint pci_ifhpr;
+ uint pci_iftpr;
+ char res6[8];
+ uint pci_iphpr;
+ uint pci_iptpr;
+ char res7[8];
+ uint pci_ofhpr;
+ uint pci_oftpr;
+ char res8[8];
+ uint pci_ophpr;
+ uint pci_optpr;
+ char res9[12];
+ uint pci_mucr;
+ char res10[8];
+ uint pci_qbar;
+ char res11[12];
+ uint pci_dmamr0;
+ uint pci_dmasr0;
+ uint pci_dmacdar0;
+ char res12[4];
+ uint pci_dmasar0;
+ char res13[4];
+ uint pci_dmadar0;
+ char res14[4];
+ uint pci_dmabcr0;
+ uint pci_dmandar0;
+ char res15[88];
+ uint pci_dmamr1;
+ uint pci_dmasr1;
+ uint pci_dmacdar1;
+ char res16[4];
+ uint pci_dmasar1;
+ char res17[4];
+ uint pci_dmadar1;
+ char res18[4];
+ uint pci_dmabcr1;
+ uint pci_dmandar1;
+ char res19[88];
+ uint pci_dmamr2;
+ uint pci_dmasr2;
+ uint pci_dmacdar2;
+ char res20[4];
+ uint pci_dmasar2;
+ char res21[4];
+ uint pci_dmadar2;
+ char res22[4];
+ uint pci_dmabcr2;
+ uint pci_dmandar2;
+ char res23[88];
+ uint pci_dmamr3;
+ uint pci_dmasr3;
+ uint pci_dmacdar3;
+ char res24[4];
+ uint pci_dmasar3;
+ char res25[4];
+ uint pci_dmadar3;
+ char res26[4];
+ uint pci_dmabcr3;
+ uint pci_dmandar3;
+ char res27[344];
+ uint pci_potar0;
+ char res28[4];
+ uint pci_pobar0;
+ char res29[4];
+ uint pci_pocmr0;
+ char res30[4];
+ uint pci_potar1;
+ char res31[4];
+ uint pci_pobar1;
+ char res32[4];
+ uint pci_pocmr1;
+ char res33[4];
+ uint pci_potar2;
+ char res34[4];
+ uint pci_pobar2;
+ char res35[4];
+ uint pci_pocmr2;
+ char res36[52];
+ uint pci_ptcr;
+ uint pci_gpcr;
+ uint pci_gcr;
+ uint pci_esr;
+ uint pci_emr;
+ uint pci_ecr;
+ uint pci_eacr;
+ char res37[4];
+ uint pci_edcr;
+ char res38[4];
+ uint pci_eccr;
+ char res39[44];
+ uint pci_pitar1;
+ char res40[4];
+ uint pci_pibar1;
+ char res41[4];
+ uint pci_picmr1;
+ char res42[4];
+ uint pci_pitar0;
+ char res43[4];
+ uint pci_pibar0;
+ char res44[4];
+ uint pci_picmr0;
+ char res45[4];
+ uint pci_cfg_addr;
+ uint pci_cfg_data;
+ uint pci_int_ack;
+ char res46[756];
+}pci8260_t;
#define PISCR_PIRQ_MASK ((ushort)0xff00)
#define PISCR_PS ((ushort)0x0080)
#define PISCR_PIE ((ushort)0x0004)
@@ -375,6 +506,7 @@
sysconf8260_t im_siu_conf; /* SIU Configuration */
memctl8260_t im_memctl; /* Memory Controller */
sit8260_t im_sit; /* System Integration Timers */
+ pci8260_t im_pci; /* PCI Configuration */
intctl8260_t im_intctl; /* Interrupt Controller */
car8260_t im_clkrst; /* Clocks and reset */
iop8260_t im_ioport; /* IO Port control/status */
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index ac4ab47..f036b68 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -92,293 +92,294 @@
/* Special Purpose Registers (SPRNs)*/
-#define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */
-#define SPRN_CTR 0x009 /* Count Register */
-#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */
+#define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */
+#define SPRN_CTR 0x009 /* Count Register */
+#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */
#ifndef CONFIG_BOOKE
-#define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */
-#define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */
+#define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */
+#define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */
#else
#define SPRN_DAC1 0x13C /* Book E Data Address Compare 1 */
#define SPRN_DAC2 0x13D /* Book E Data Address Compare 2 */
#endif /* CONFIG_BOOKE */
-#define SPRN_DAR 0x013 /* Data Address Register */
-#define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */
-#define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */
-#define SPRN_DBAT1L 0x21B /* Data BAT 1 Lower Register */
-#define SPRN_DBAT1U 0x21A /* Data BAT 1 Upper Register */
-#define SPRN_DBAT2L 0x21D /* Data BAT 2 Lower Register */
-#define SPRN_DBAT2U 0x21C /* Data BAT 2 Upper Register */
-#define SPRN_DBAT3L 0x21F /* Data BAT 3 Lower Register */
-#define SPRN_DBAT3U 0x21E /* Data BAT 3 Upper Register */
-#define SPRN_DBAT4L 0x239 /* Data BAT 4 Lower Register */
-#define SPRN_DBAT4U 0x238 /* Data BAT 4 Upper Register */
-#define SPRN_DBAT5L 0x23B /* Data BAT 5 Lower Register */
-#define SPRN_DBAT5U 0x23A /* Data BAT 5 Upper Register */
-#define SPRN_DBAT6L 0x23D /* Data BAT 6 Lower Register */
-#define SPRN_DBAT6U 0x23C /* Data BAT 6 Upper Register */
-#define SPRN_DBAT7L 0x23F /* Data BAT 7 Lower Register */
-#define SPRN_DBAT7U 0x23E /* Data BAT 7 Lower Register */
-#define SPRN_DBCR 0x3F2 /* Debug Control Regsiter */
-#define DBCR_EDM 0x80000000
-#define DBCR_IDM 0x40000000
-#define DBCR_RST(x) (((x) & 0x3) << 28)
-#define DBCR_RST_NONE 0
-#define DBCR_RST_CORE 1
-#define DBCR_RST_CHIP 2
-#define DBCR_RST_SYSTEM 3
-#define DBCR_IC 0x08000000 /* Instruction Completion Debug Evnt */
-#define DBCR_BT 0x04000000 /* Branch Taken Debug Event */
-#define DBCR_EDE 0x02000000 /* Exception Debug Event */
-#define DBCR_TDE 0x01000000 /* TRAP Debug Event */
-#define DBCR_FER 0x00F80000 /* First Events Remaining Mask */
-#define DBCR_FT 0x00040000 /* Freeze Timers on Debug Event */
-#define DBCR_IA1 0x00020000 /* Instr. Addr. Compare 1 Enable */
-#define DBCR_IA2 0x00010000 /* Instr. Addr. Compare 2 Enable */
-#define DBCR_D1R 0x00008000 /* Data Addr. Compare 1 Read Enable */
-#define DBCR_D1W 0x00004000 /* Data Addr. Compare 1 Write Enable */
-#define DBCR_D1S(x) (((x) & 0x3) << 12) /* Data Adrr. Compare 1 Size */
-#define DAC_BYTE 0
-#define DAC_HALF 1
-#define DAC_WORD 2
-#define DAC_QUAD 3
-#define DBCR_D2R 0x00000800 /* Data Addr. Compare 2 Read Enable */
-#define DBCR_D2W 0x00000400 /* Data Addr. Compare 2 Write Enable */
-#define DBCR_D2S(x) (((x) & 0x3) << 8) /* Data Addr. Compare 2 Size */
-#define DBCR_SBT 0x00000040 /* Second Branch Taken Debug Event */
-#define DBCR_SED 0x00000020 /* Second Exception Debug Event */
-#define DBCR_STD 0x00000010 /* Second Trap Debug Event */
-#define DBCR_SIA 0x00000008 /* Second IAC Enable */
-#define DBCR_SDA 0x00000004 /* Second DAC Enable */
-#define DBCR_JOI 0x00000002 /* JTAG Serial Outbound Int. Enable */
-#define DBCR_JII 0x00000001 /* JTAG Serial Inbound Int. Enable */
+#define SPRN_DAR 0x013 /* Data Address Register */
+#define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */
+#define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */
+#define SPRN_DBAT1L 0x21B /* Data BAT 1 Lower Register */
+#define SPRN_DBAT1U 0x21A /* Data BAT 1 Upper Register */
+#define SPRN_DBAT2L 0x21D /* Data BAT 2 Lower Register */
+#define SPRN_DBAT2U 0x21C /* Data BAT 2 Upper Register */
+#define SPRN_DBAT3L 0x21F /* Data BAT 3 Lower Register */
+#define SPRN_DBAT3U 0x21E /* Data BAT 3 Upper Register */
+#define SPRN_DBAT4L 0x239 /* Data BAT 4 Lower Register */
+#define SPRN_DBAT4U 0x238 /* Data BAT 4 Upper Register */
+#define SPRN_DBAT5L 0x23B /* Data BAT 5 Lower Register */
+#define SPRN_DBAT5U 0x23A /* Data BAT 5 Upper Register */
+#define SPRN_DBAT6L 0x23D /* Data BAT 6 Lower Register */
+#define SPRN_DBAT6U 0x23C /* Data BAT 6 Upper Register */
+#define SPRN_DBAT7L 0x23F /* Data BAT 7 Lower Register */
+#define SPRN_DBAT7U 0x23E /* Data BAT 7 Lower Register */
+#define SPRN_DBCR 0x3F2 /* Debug Control Regsiter */
+#define DBCR_EDM 0x80000000
+#define DBCR_IDM 0x40000000
+#define DBCR_RST(x) (((x) & 0x3) << 28)
+#define DBCR_RST_NONE 0
+#define DBCR_RST_CORE 1
+#define DBCR_RST_CHIP 2
+#define DBCR_RST_SYSTEM 3
+#define DBCR_IC 0x08000000 /* Instruction Completion Debug Evnt */
+#define DBCR_BT 0x04000000 /* Branch Taken Debug Event */
+#define DBCR_EDE 0x02000000 /* Exception Debug Event */
+#define DBCR_TDE 0x01000000 /* TRAP Debug Event */
+#define DBCR_FER 0x00F80000 /* First Events Remaining Mask */
+#define DBCR_FT 0x00040000 /* Freeze Timers on Debug Event */
+#define DBCR_IA1 0x00020000 /* Instr. Addr. Compare 1 Enable */
+#define DBCR_IA2 0x00010000 /* Instr. Addr. Compare 2 Enable */
+#define DBCR_D1R 0x00008000 /* Data Addr. Compare 1 Read Enable */
+#define DBCR_D1W 0x00004000 /* Data Addr. Compare 1 Write Enable */
+#define DBCR_D1S(x) (((x) & 0x3) << 12) /* Data Adrr. Compare 1 Size */
+#define DAC_BYTE 0
+#define DAC_HALF 1
+#define DAC_WORD 2
+#define DAC_QUAD 3
+#define DBCR_D2R 0x00000800 /* Data Addr. Compare 2 Read Enable */
+#define DBCR_D2W 0x00000400 /* Data Addr. Compare 2 Write Enable */
+#define DBCR_D2S(x) (((x) & 0x3) << 8) /* Data Addr. Compare 2 Size */
+#define DBCR_SBT 0x00000040 /* Second Branch Taken Debug Event */
+#define DBCR_SED 0x00000020 /* Second Exception Debug Event */
+#define DBCR_STD 0x00000010 /* Second Trap Debug Event */
+#define DBCR_SIA 0x00000008 /* Second IAC Enable */
+#define DBCR_SDA 0x00000004 /* Second DAC Enable */
+#define DBCR_JOI 0x00000002 /* JTAG Serial Outbound Int. Enable */
+#define DBCR_JII 0x00000001 /* JTAG Serial Inbound Int. Enable */
#ifndef CONFIG_BOOKE
#define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */
#else
#define SPRN_DBCR0 0x134 /* Book E Debug Control Register 0 */
#endif /* CONFIG_BOOKE */
#ifndef CONFIG_BOOKE
-#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */
-#define SPRN_DBSR 0x3F0 /* Debug Status Register */
+#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */
+#define SPRN_DBSR 0x3F0 /* Debug Status Register */
#else
#define SPRN_DBCR1 0x135 /* Book E Debug Control Register 1 */
#define SPRN_DBSR 0x130 /* Book E Debug Status Register */
#define DBSR_IC 0x08000000 /* Book E Instruction Completion */
#define DBSR_TIE 0x01000000 /* Book E Trap Instruction Event */
#endif /* CONFIG_BOOKE */
-#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */
-#define DCCR_NOCACHE 0 /* Noncacheable */
-#define DCCR_CACHE 1 /* Cacheable */
-#define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */
-#define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */
-#define DCWR_COPY 0 /* Copy-back */
-#define DCWR_WRITE 1 /* Write-through */
+#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */
+#define DCCR_NOCACHE 0 /* Noncacheable */
+#define DCCR_CACHE 1 /* Cacheable */
+#define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */
+#define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */
+#define DCWR_COPY 0 /* Copy-back */
+#define DCWR_WRITE 1 /* Write-through */
#ifndef CONFIG_BOOKE
-#define SPRN_DEAR 0x3D5 /* Data Error Address Register */
+#define SPRN_DEAR 0x3D5 /* Data Error Address Register */
#else
#define SPRN_DEAR 0x03D /* Book E Data Error Address Register */
#endif /* CONFIG_BOOKE */
-#define SPRN_DEC 0x016 /* Decrement Register */
-#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */
-#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */
-#define SPRN_EAR 0x11A /* External Address Register */
+#define SPRN_DEC 0x016 /* Decrement Register */
+#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */
+#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */
+#define SPRN_EAR 0x11A /* External Address Register */
#ifndef CONFIG_BOOKE
-#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */
+#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */
#else
#define SPRN_ESR 0x03E /* Book E Exception Syndrome Register */
#endif /* CONFIG_BOOKE */
-#define ESR_IMCP 0x80000000 /* Instr. Machine Check - Protection */
-#define ESR_IMCN 0x40000000 /* Instr. Machine Check - Non-config */
-#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */
-#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */
-#define ESR_PIL 0x08000000 /* Program Exception - Illegal */
-#define ESR_PPR 0x04000000 /* Program Exception - Priveleged */
-#define ESR_PTR 0x02000000 /* Program Exception - Trap */
-#define ESR_DST 0x00800000 /* Storage Exception - Data miss */
-#define ESR_DIZ 0x00400000 /* Storage Exception - Zone fault */
-#define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */
-#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */
-#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */
-#define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */
-#define HID0_EMCP (1<<31) /* Enable Machine Check pin */
-#define HID0_EBA (1<<29) /* Enable Bus Address Parity */
-#define HID0_EBD (1<<28) /* Enable Bus Data Parity */
-#define HID0_SBCLK (1<<27)
-#define HID0_EICE (1<<26)
-#define HID0_ECLK (1<<25)
-#define HID0_PAR (1<<24)
-#define HID0_DOZE (1<<23)
-#define HID0_NAP (1<<22)
-#define HID0_SLEEP (1<<21)
-#define HID0_DPM (1<<20)
-#define HID0_ICE (1<<15) /* Instruction Cache Enable */
-#define HID0_DCE (1<<14) /* Data Cache Enable */
-#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */
-#define HID0_DLOCK (1<<12) /* Data Cache Lock */
-#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */
-#define HID0_DCFI (1<<10) /* Data Cache Flash Invalidate */
-#define HID0_DCI HID0_DCFI
+#define ESR_IMCP 0x80000000 /* Instr. Machine Check - Protection */
+#define ESR_IMCN 0x40000000 /* Instr. Machine Check - Non-config */
+#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */
+#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */
+#define ESR_PIL 0x08000000 /* Program Exception - Illegal */
+#define ESR_PPR 0x04000000 /* Program Exception - Priveleged */
+#define ESR_PTR 0x02000000 /* Program Exception - Trap */
+#define ESR_DST 0x00800000 /* Storage Exception - Data miss */
+#define ESR_DIZ 0x00400000 /* Storage Exception - Zone fault */
+#define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */
+#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */
+#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */
+#define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */
+#define HID0_EMCP (1<<31) /* Enable Machine Check pin */
+#define HID0_EBA (1<<29) /* Enable Bus Address Parity */
+#define HID0_EBD (1<<28) /* Enable Bus Data Parity */
+#define HID0_SBCLK (1<<27)
+#define HID0_EICE (1<<26)
+#define HID0_ECLK (1<<25)
+#define HID0_PAR (1<<24)
+#define HID0_DOZE (1<<23)
+#define HID0_NAP (1<<22)
+#define HID0_SLEEP (1<<21)
+#define HID0_DPM (1<<20)
+#define HID0_ICE (1<<15) /* Instruction Cache Enable */
+#define HID0_DCE (1<<14) /* Data Cache Enable */
+#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */
+#define HID0_DLOCK (1<<12) /* Data Cache Lock */
+#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */
+#define HID0_DCFI (1<<10) /* Data Cache Flash Invalidate */
+#define HID0_DCI HID0_DCFI
#define HID0_SPD (1<<9) /* Speculative disable */
#define HID0_SGE (1<<7) /* Store Gathering Enable */
-#define HID0_SIED HID_SGE /* Serial Instr. Execution [Disable] */
+#define HID0_SIED HID_SGE /* Serial Instr. Execution [Disable] */
#define HID0_DCFA (1<<6) /* Data Cache Flush Assist */
#define HID0_BTIC (1<<5) /* Branch Target Instruction Cache Enable */
#define HID0_ABE (1<<3) /* Address Broadcast Enable */
-#define HID0_BHTE (1<<2) /* Branch History Table Enable */
-#define HID0_BTCD (1<<1) /* Branch target cache disable */
-#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */
-#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */
+#define HID0_BHTE (1<<2) /* Branch History Table Enable */
+#define HID0_BTCD (1<<1) /* Branch target cache disable */
+#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */
+#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */
#ifndef CONFIG_BOOKE
-#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */
-#define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */
+#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */
+#define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */
#else
#define SPRN_IAC1 0x138 /* Book E Instruction Address Compare 1 */
#define SPRN_IAC2 0x139 /* Book E Instruction Address Compare 2 */
#endif /* CONFIG_BOOKE */
-#define SPRN_IBAT0L 0x211 /* Instruction BAT 0 Lower Register */
-#define SPRN_IBAT0U 0x210 /* Instruction BAT 0 Upper Register */
-#define SPRN_IBAT1L 0x213 /* Instruction BAT 1 Lower Register */
-#define SPRN_IBAT1U 0x212 /* Instruction BAT 1 Upper Register */
-#define SPRN_IBAT2L 0x215 /* Instruction BAT 2 Lower Register */
-#define SPRN_IBAT2U 0x214 /* Instruction BAT 2 Upper Register */
-#define SPRN_IBAT3L 0x217 /* Instruction BAT 3 Lower Register */
-#define SPRN_IBAT3U 0x216 /* Instruction BAT 3 Upper Register */
-#define SPRN_IBAT4L 0x231 /* Instruction BAT 4 Lower Register */
-#define SPRN_IBAT4U 0x230 /* Instruction BAT 4 Upper Register */
-#define SPRN_IBAT5L 0x233 /* Instruction BAT 5 Lower Register */
-#define SPRN_IBAT5U 0x232 /* Instruction BAT 5 Upper Register */
-#define SPRN_IBAT6L 0x235 /* Instruction BAT 6 Lower Register */
-#define SPRN_IBAT6U 0x234 /* Instruction BAT 6 Upper Register */
-#define SPRN_IBAT7L 0x237 /* Instruction BAT 7 Lower Register */
-#define SPRN_IBAT7U 0x236 /* Instruction BAT 7 Upper Register */
-#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */
-#define ICCR_NOCACHE 0 /* Noncacheable */
-#define ICCR_CACHE 1 /* Cacheable */
-#define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */
-#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */
-#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */
-#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */
-#define SPRN_IMMR 0x27E /* Internal Memory Map Register */
-#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */
-#define SPRN_LR 0x008 /* Link Register */
-#define SPRN_MMCR0 0x3B8 /* Monitor Mode Control Register 0 */
-#define SPRN_MMCR1 0x3BC /* Monitor Mode Control Register 1 */
-#define SPRN_PBL1 0x3FC /* Protection Bound Lower 1 */
-#define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */
-#define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */
-#define SPRN_PBU2 0x3FF /* Protection Bound Upper 2 */
+#define SPRN_IBAT0L 0x211 /* Instruction BAT 0 Lower Register */
+#define SPRN_IBAT0U 0x210 /* Instruction BAT 0 Upper Register */
+#define SPRN_IBAT1L 0x213 /* Instruction BAT 1 Lower Register */
+#define SPRN_IBAT1U 0x212 /* Instruction BAT 1 Upper Register */
+#define SPRN_IBAT2L 0x215 /* Instruction BAT 2 Lower Register */
+#define SPRN_IBAT2U 0x214 /* Instruction BAT 2 Upper Register */
+#define SPRN_IBAT3L 0x217 /* Instruction BAT 3 Lower Register */
+#define SPRN_IBAT3U 0x216 /* Instruction BAT 3 Upper Register */
+#define SPRN_IBAT4L 0x231 /* Instruction BAT 4 Lower Register */
+#define SPRN_IBAT4U 0x230 /* Instruction BAT 4 Upper Register */
+#define SPRN_IBAT5L 0x233 /* Instruction BAT 5 Lower Register */
+#define SPRN_IBAT5U 0x232 /* Instruction BAT 5 Upper Register */
+#define SPRN_IBAT6L 0x235 /* Instruction BAT 6 Lower Register */
+#define SPRN_IBAT6U 0x234 /* Instruction BAT 6 Upper Register */
+#define SPRN_IBAT7L 0x237 /* Instruction BAT 7 Lower Register */
+#define SPRN_IBAT7U 0x236 /* Instruction BAT 7 Upper Register */
+#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */
+#define ICCR_NOCACHE 0 /* Noncacheable */
+#define ICCR_CACHE 1 /* Cacheable */
+#define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */
+#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */
+#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */
+#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */
+#define SPRN_IMMR 0x27E /* Internal Memory Map Register */
+#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */
+#define SPRN_LR 0x008 /* Link Register */
+#define SPRN_MBAR 0x137 /* System memory base address */
+#define SPRN_MMCR0 0x3B8 /* Monitor Mode Control Register 0 */
+#define SPRN_MMCR1 0x3BC /* Monitor Mode Control Register 1 */
+#define SPRN_PBL1 0x3FC /* Protection Bound Lower 1 */
+#define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */
+#define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */
+#define SPRN_PBU2 0x3FF /* Protection Bound Upper 2 */
#ifndef CONFIG_BOOKE
-#define SPRN_PID 0x3B1 /* Process ID */
-#define SPRN_PIR 0x3FF /* Processor Identification Register */
+#define SPRN_PID 0x3B1 /* Process ID */
+#define SPRN_PIR 0x3FF /* Processor Identification Register */
#else
#define SPRN_PID 0x030 /* Book E Process ID */
#define SPRN_PIR 0x11E /* Book E Processor Identification Register */
#endif /* CONFIG_BOOKE */
-#define SPRN_PIT 0x3DB /* Programmable Interval Timer */
-#define SPRN_PMC1 0x3B9 /* Performance Counter Register 1 */
-#define SPRN_PMC2 0x3BA /* Performance Counter Register 2 */
-#define SPRN_PMC3 0x3BD /* Performance Counter Register 3 */
-#define SPRN_PMC4 0x3BE /* Performance Counter Register 4 */
-#define SPRN_PVR 0x11F /* Processor Version Register */
-#define SPRN_RPA 0x3D6 /* Required Physical Address Register */
-#define SPRN_SDA 0x3BF /* Sampled Data Address Register */
-#define SPRN_SDR1 0x019 /* MMU Hash Base Register */
-#define SPRN_SGR 0x3B9 /* Storage Guarded Register */
-#define SGR_NORMAL 0
-#define SGR_GUARDED 1
-#define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */
-#define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */
-#define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */
-#define SPRN_SPRG2 0x112 /* Special Purpose Register General 2 */
-#define SPRN_SPRG3 0x113 /* Special Purpose Register General 3 */
-#define SPRN_SRR0 0x01A /* Save/Restore Register 0 */
-#define SPRN_SRR1 0x01B /* Save/Restore Register 1 */
-#define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */
-#define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */
-#define SPRN_TBHI 0x3DC /* Time Base High */
-#define SPRN_TBHU 0x3CC /* Time Base High User-mode */
-#define SPRN_TBLO 0x3DD /* Time Base Low */
-#define SPRN_TBLU 0x3CD /* Time Base Low User-mode */
-#define SPRN_TBRL 0x10D /* Time Base Read Lower Register */
-#define SPRN_TBRU 0x10C /* Time Base Read Upper Register */
-#define SPRN_TBWL 0x11D /* Time Base Write Lower Register */
-#define SPRN_TBWU 0x11C /* Time Base Write Upper Register */
+#define SPRN_PIT 0x3DB /* Programmable Interval Timer */
+#define SPRN_PMC1 0x3B9 /* Performance Counter Register 1 */
+#define SPRN_PMC2 0x3BA /* Performance Counter Register 2 */
+#define SPRN_PMC3 0x3BD /* Performance Counter Register 3 */
+#define SPRN_PMC4 0x3BE /* Performance Counter Register 4 */
+#define SPRN_PVR 0x11F /* Processor Version Register */
+#define SPRN_RPA 0x3D6 /* Required Physical Address Register */
+#define SPRN_SDA 0x3BF /* Sampled Data Address Register */
+#define SPRN_SDR1 0x019 /* MMU Hash Base Register */
+#define SPRN_SGR 0x3B9 /* Storage Guarded Register */
+#define SGR_NORMAL 0
+#define SGR_GUARDED 1
+#define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */
+#define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */
+#define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */
+#define SPRN_SPRG2 0x112 /* Special Purpose Register General 2 */
+#define SPRN_SPRG3 0x113 /* Special Purpose Register General 3 */
+#define SPRN_SRR0 0x01A /* Save/Restore Register 0 */
+#define SPRN_SRR1 0x01B /* Save/Restore Register 1 */
+#define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */
+#define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */
+#define SPRN_TBHI 0x3DC /* Time Base High */
+#define SPRN_TBHU 0x3CC /* Time Base High User-mode */
+#define SPRN_TBLO 0x3DD /* Time Base Low */
+#define SPRN_TBLU 0x3CD /* Time Base Low User-mode */
+#define SPRN_TBRL 0x10D /* Time Base Read Lower Register */
+#define SPRN_TBRU 0x10C /* Time Base Read Upper Register */
+#define SPRN_TBWL 0x11D /* Time Base Write Lower Register */
+#define SPRN_TBWU 0x11C /* Time Base Write Upper Register */
#ifndef CONFIG_BOOKE
-#define SPRN_TCR 0x3DA /* Timer Control Register */
+#define SPRN_TCR 0x3DA /* Timer Control Register */
#else
#define SPRN_TCR 0x154 /* Book E Timer Control Register */
#endif /* CONFIG_BOOKE */
-#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */
-#define WP_2_17 0 /* 2^17 clocks */
-#define WP_2_21 1 /* 2^21 clocks */
-#define WP_2_25 2 /* 2^25 clocks */
-#define WP_2_29 3 /* 2^29 clocks */
-#define TCR_WRC(x) (((x)&0x3)<<28) /* WDT Reset Control */
-#define WRC_NONE 0 /* No reset will occur */
-#define WRC_CORE 1 /* Core reset will occur */
-#define WRC_CHIP 2 /* Chip reset will occur */
-#define WRC_SYSTEM 3 /* System reset will occur */
-#define TCR_WIE 0x08000000 /* WDT Interrupt Enable */
-#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */
-#define TCR_FP(x) (((x)&0x3)<<24) /* FIT Period */
-#define FP_2_9 0 /* 2^9 clocks */
-#define FP_2_13 1 /* 2^13 clocks */
-#define FP_2_17 2 /* 2^17 clocks */
-#define FP_2_21 3 /* 2^21 clocks */
-#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */
-#define TCR_ARE 0x00400000 /* Auto Reload Enable */
-#define SPRN_THRM1 0x3FC /* Thermal Management Register 1 */
-#define THRM1_TIN (1<<0)
-#define THRM1_TIV (1<<1)
-#define THRM1_THRES (0x7f<<2)
-#define THRM1_TID (1<<29)
-#define THRM1_TIE (1<<30)
-#define THRM1_V (1<<31)
-#define SPRN_THRM2 0x3FD /* Thermal Management Register 2 */
-#define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */
-#define THRM3_E (1<<31)
+#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */
+#define WP_2_17 0 /* 2^17 clocks */
+#define WP_2_21 1 /* 2^21 clocks */
+#define WP_2_25 2 /* 2^25 clocks */
+#define WP_2_29 3 /* 2^29 clocks */
+#define TCR_WRC(x) (((x)&0x3)<<28) /* WDT Reset Control */
+#define WRC_NONE 0 /* No reset will occur */
+#define WRC_CORE 1 /* Core reset will occur */
+#define WRC_CHIP 2 /* Chip reset will occur */
+#define WRC_SYSTEM 3 /* System reset will occur */
+#define TCR_WIE 0x08000000 /* WDT Interrupt Enable */
+#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */
+#define TCR_FP(x) (((x)&0x3)<<24) /* FIT Period */
+#define FP_2_9 0 /* 2^9 clocks */
+#define FP_2_13 1 /* 2^13 clocks */
+#define FP_2_17 2 /* 2^17 clocks */
+#define FP_2_21 3 /* 2^21 clocks */
+#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */
+#define TCR_ARE 0x00400000 /* Auto Reload Enable */
+#define SPRN_THRM1 0x3FC /* Thermal Management Register 1 */
+#define THRM1_TIN (1<<0)
+#define THRM1_TIV (1<<1)
+#define THRM1_THRES (0x7f<<2)
+#define THRM1_TID (1<<29)
+#define THRM1_TIE (1<<30)
+#define THRM1_V (1<<31)
+#define SPRN_THRM2 0x3FD /* Thermal Management Register 2 */
+#define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */
+#define THRM3_E (1<<31)
#define SPRN_TLBMISS 0x3D4 /* 980 7450 TLB Miss Register */
#ifndef CONFIG_BOOKE
-#define SPRN_TSR 0x3D8 /* Timer Status Register */
+#define SPRN_TSR 0x3D8 /* Timer Status Register */
#else
#define SPRN_TSR 0x150 /* Book E Timer Status Register */
#endif /* CONFIG_BOOKE */
-#define TSR_ENW 0x80000000 /* Enable Next Watchdog */
-#define TSR_WIS 0x40000000 /* WDT Interrupt Status */
-#define TSR_WRS(x) (((x)&0x3)<<28) /* WDT Reset Status */
-#define WRS_NONE 0 /* No WDT reset occurred */
-#define WRS_CORE 1 /* WDT forced core reset */
-#define WRS_CHIP 2 /* WDT forced chip reset */
-#define WRS_SYSTEM 3 /* WDT forced system reset */
-#define TSR_PIS 0x08000000 /* PIT Interrupt Status */
-#define TSR_FIS 0x04000000 /* FIT Interrupt Status */
-#define SPRN_UMMCR0 0x3A8 /* User Monitor Mode Control Register 0 */
-#define SPRN_UMMCR1 0x3AC /* User Monitor Mode Control Register 0 */
-#define SPRN_UPMC1 0x3A9 /* User Performance Counter Register 1 */
-#define SPRN_UPMC2 0x3AA /* User Performance Counter Register 2 */
-#define SPRN_UPMC3 0x3AD /* User Performance Counter Register 3 */
-#define SPRN_UPMC4 0x3AE /* User Performance Counter Register 4 */
-#define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */
-#define SPRN_XER 0x001 /* Fixed Point Exception Register */
-#define SPRN_ZPR 0x3B0 /* Zone Protection Register */
+#define TSR_ENW 0x80000000 /* Enable Next Watchdog */
+#define TSR_WIS 0x40000000 /* WDT Interrupt Status */
+#define TSR_WRS(x) (((x)&0x3)<<28) /* WDT Reset Status */
+#define WRS_NONE 0 /* No WDT reset occurred */
+#define WRS_CORE 1 /* WDT forced core reset */
+#define WRS_CHIP 2 /* WDT forced chip reset */
+#define WRS_SYSTEM 3 /* WDT forced system reset */
+#define TSR_PIS 0x08000000 /* PIT Interrupt Status */
+#define TSR_FIS 0x04000000 /* FIT Interrupt Status */
+#define SPRN_UMMCR0 0x3A8 /* User Monitor Mode Control Register 0 */
+#define SPRN_UMMCR1 0x3AC /* User Monitor Mode Control Register 0 */
+#define SPRN_UPMC1 0x3A9 /* User Performance Counter Register 1 */
+#define SPRN_UPMC2 0x3AA /* User Performance Counter Register 2 */
+#define SPRN_UPMC3 0x3AD /* User Performance Counter Register 3 */
+#define SPRN_UPMC4 0x3AE /* User Performance Counter Register 4 */
+#define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */
+#define SPRN_XER 0x001 /* Fixed Point Exception Register */
+#define SPRN_ZPR 0x3B0 /* Zone Protection Register */
/* Book E definitions */
#define SPRN_DECAR 0x036 /* Decrementer Auto Reload Register */
#define SPRN_CSRR0 0x03A /* Critical SRR0 */
#define SPRN_CSRR1 0x03B /* Critical SRR0 */
-#define SPRN_IVPR 0x03F /* Interrupt Vector Prefix Register */
+#define SPRN_IVPR 0x03F /* Interrupt Vector Prefix Register */
#define SPRN_USPRG0 0x100 /* User Special Purpose Register General 0 */
-#define SPRN_SPRG4R 0x104 /* Special Purpose Register General 4 Read */
-#define SPRN_SPRG5R 0x105 /* Special Purpose Register General 5 Read */
-#define SPRN_SPRG6R 0x106 /* Special Purpose Register General 6 Read */
-#define SPRN_SPRG7R 0x107 /* Special Purpose Register General 7 Read */
-#define SPRN_SPRG4W 0x114 /* Special Purpose Register General 4 Write */
-#define SPRN_SPRG5W 0x115 /* Special Purpose Register General 5 Write */
-#define SPRN_SPRG6W 0x116 /* Special Purpose Register General 6 Write */
-#define SPRN_SPRG7W 0x117 /* Special Purpose Register General 7 Write */
+#define SPRN_SPRG4R 0x104 /* Special Purpose Register General 4 Read */
+#define SPRN_SPRG5R 0x105 /* Special Purpose Register General 5 Read */
+#define SPRN_SPRG6R 0x106 /* Special Purpose Register General 6 Read */
+#define SPRN_SPRG7R 0x107 /* Special Purpose Register General 7 Read */
+#define SPRN_SPRG4W 0x114 /* Special Purpose Register General 4 Write */
+#define SPRN_SPRG5W 0x115 /* Special Purpose Register General 5 Write */
+#define SPRN_SPRG6W 0x116 /* Special Purpose Register General 6 Write */
+#define SPRN_SPRG7W 0x117 /* Special Purpose Register General 7 Write */
#define SPRN_DBCR2 0x136 /* Debug Control Register 2 */
-#define SPRN_IAC3 0x13A /* Instruction Address Compare 3 */
-#define SPRN_IAC4 0x13B /* Instruction Address Compare 4 */
+#define SPRN_IAC3 0x13A /* Instruction Address Compare 3 */
+#define SPRN_IAC4 0x13B /* Instruction Address Compare 4 */
#define SPRN_DVC1 0x13E /* Data Value Compare Register 1 */
#define SPRN_DVC2 0x13F /* Data Value Compare Register 2 */
#define SPRN_IVOR0 0x190 /* Interrupt Vector Offset Register 0 */
@@ -406,7 +407,7 @@
#define L1CSR1_ICFI 0x00000002 /* Instruction Cache Flash Invalidate */
#define L1CSR1_ICE 0x00000001 /* Instruction Cache Enable */
-#define SPRN_MMUCSR0 0x3f4 /* MMU control and status register 0 */
+#define SPRN_MMUCSR0 0x3f4 /* MMU control and status register 0 */
#define SPRN_MAS0 0x270 /* MMU Assist Register 0 */
#define SPRN_MAS1 0x271 /* MMU Assist Register 1 */
#define SPRN_MAS2 0x272 /* MMU Assist Register 2 */
@@ -433,127 +434,128 @@
/* Short-hand versions for a number of the above SPRNs */
-#define CTR SPRN_CTR /* Counter Register */
-#define DAR SPRN_DAR /* Data Address Register */
-#define DABR SPRN_DABR /* Data Address Breakpoint Register */
-#define DAC1 SPRN_DAC1 /* Data Address Register 1 */
-#define DAC2 SPRN_DAC2 /* Data Address Register 2 */
-#define DBAT0L SPRN_DBAT0L /* Data BAT 0 Lower Register */
-#define DBAT0U SPRN_DBAT0U /* Data BAT 0 Upper Register */
-#define DBAT1L SPRN_DBAT1L /* Data BAT 1 Lower Register */
-#define DBAT1U SPRN_DBAT1U /* Data BAT 1 Upper Register */
-#define DBAT2L SPRN_DBAT2L /* Data BAT 2 Lower Register */
-#define DBAT2U SPRN_DBAT2U /* Data BAT 2 Upper Register */
-#define DBAT3L SPRN_DBAT3L /* Data BAT 3 Lower Register */
-#define DBAT3U SPRN_DBAT3U /* Data BAT 3 Upper Register */
-#define DBAT4L SPRN_DBAT4L /* Data BAT 4 Lower Register */
-#define DBAT4U SPRN_DBAT4U /* Data BAT 4 Upper Register */
-#define DBAT5L SPRN_DBAT5L /* Data BAT 5 Lower Register */
-#define DBAT5U SPRN_DBAT5U /* Data BAT 5 Upper Register */
-#define DBAT6L SPRN_DBAT6L /* Data BAT 6 Lower Register */
-#define DBAT6U SPRN_DBAT6U /* Data BAT 6 Upper Register */
-#define DBAT7L SPRN_DBAT7L /* Data BAT 7 Lower Register */
-#define DBAT7U SPRN_DBAT7U /* Data BAT 7 Upper Register */
-#define DBCR0 SPRN_DBCR0 /* Debug Control Register 0 */
-#define DBCR1 SPRN_DBCR1 /* Debug Control Register 1 */
-#define DBSR SPRN_DBSR /* Debug Status Register */
-#define DCMP SPRN_DCMP /* Data TLB Compare Register */
-#define DEC SPRN_DEC /* Decrement Register */
-#define DMISS SPRN_DMISS /* Data TLB Miss Register */
-#define DSISR SPRN_DSISR /* Data Storage Interrupt Status Register */
-#define EAR SPRN_EAR /* External Address Register */
-#define ESR SPRN_ESR /* Exception Syndrome Register */
-#define HASH1 SPRN_HASH1 /* Primary Hash Address Register */
-#define HASH2 SPRN_HASH2 /* Secondary Hash Address Register */
-#define HID0 SPRN_HID0 /* Hardware Implementation Register 0 */
-#define HID1 SPRN_HID1 /* Hardware Implementation Register 1 */
-#define IABR SPRN_IABR /* Instruction Address Breakpoint Register */
-#define IAC1 SPRN_IAC1 /* Instruction Address Register 1 */
-#define IAC2 SPRN_IAC2 /* Instruction Address Register 2 */
-#define IBAT0L SPRN_IBAT0L /* Instruction BAT 0 Lower Register */
-#define IBAT0U SPRN_IBAT0U /* Instruction BAT 0 Upper Register */
-#define IBAT1L SPRN_IBAT1L /* Instruction BAT 1 Lower Register */
-#define IBAT1U SPRN_IBAT1U /* Instruction BAT 1 Upper Register */
-#define IBAT2L SPRN_IBAT2L /* Instruction BAT 2 Lower Register */
-#define IBAT2U SPRN_IBAT2U /* Instruction BAT 2 Upper Register */
-#define IBAT3L SPRN_IBAT3L /* Instruction BAT 3 Lower Register */
-#define IBAT3U SPRN_IBAT3U /* Instruction BAT 3 Upper Register */
-#define IBAT4L SPRN_IBAT4L /* Instruction BAT 4 Lower Register */
-#define IBAT4U SPRN_IBAT4U /* Instruction BAT 4 Upper Register */
-#define IBAT5L SPRN_IBAT5L /* Instruction BAT 5 Lower Register */
-#define IBAT5U SPRN_IBAT5U /* Instruction BAT 5 Upper Register */
-#define IBAT6L SPRN_IBAT6L /* Instruction BAT 6 Lower Register */
-#define IBAT6U SPRN_IBAT6U /* Instruction BAT 6 Upper Register */
-#define IBAT7L SPRN_IBAT7L /* Instruction BAT 7 Lower Register */
-#define IBAT7U SPRN_IBAT7U /* Instruction BAT 7 Lower Register */
-#define ICMP SPRN_ICMP /* Instruction TLB Compare Register */
-#define IMISS SPRN_IMISS /* Instruction TLB Miss Register */
-#define IMMR SPRN_IMMR /* PPC 860/821 Internal Memory Map Register */
-#define L2CR SPRN_L2CR /* PPC 750 L2 control register */
-#define LR SPRN_LR
+#define CTR SPRN_CTR /* Counter Register */
+#define DAR SPRN_DAR /* Data Address Register */
+#define DABR SPRN_DABR /* Data Address Breakpoint Register */
+#define DAC1 SPRN_DAC1 /* Data Address Register 1 */
+#define DAC2 SPRN_DAC2 /* Data Address Register 2 */
+#define DBAT0L SPRN_DBAT0L /* Data BAT 0 Lower Register */
+#define DBAT0U SPRN_DBAT0U /* Data BAT 0 Upper Register */
+#define DBAT1L SPRN_DBAT1L /* Data BAT 1 Lower Register */
+#define DBAT1U SPRN_DBAT1U /* Data BAT 1 Upper Register */
+#define DBAT2L SPRN_DBAT2L /* Data BAT 2 Lower Register */
+#define DBAT2U SPRN_DBAT2U /* Data BAT 2 Upper Register */
+#define DBAT3L SPRN_DBAT3L /* Data BAT 3 Lower Register */
+#define DBAT3U SPRN_DBAT3U /* Data BAT 3 Upper Register */
+#define DBAT4L SPRN_DBAT4L /* Data BAT 4 Lower Register */
+#define DBAT4U SPRN_DBAT4U /* Data BAT 4 Upper Register */
+#define DBAT5L SPRN_DBAT5L /* Data BAT 5 Lower Register */
+#define DBAT5U SPRN_DBAT5U /* Data BAT 5 Upper Register */
+#define DBAT6L SPRN_DBAT6L /* Data BAT 6 Lower Register */
+#define DBAT6U SPRN_DBAT6U /* Data BAT 6 Upper Register */
+#define DBAT7L SPRN_DBAT7L /* Data BAT 7 Lower Register */
+#define DBAT7U SPRN_DBAT7U /* Data BAT 7 Upper Register */
+#define DBCR0 SPRN_DBCR0 /* Debug Control Register 0 */
+#define DBCR1 SPRN_DBCR1 /* Debug Control Register 1 */
+#define DBSR SPRN_DBSR /* Debug Status Register */
+#define DCMP SPRN_DCMP /* Data TLB Compare Register */
+#define DEC SPRN_DEC /* Decrement Register */
+#define DMISS SPRN_DMISS /* Data TLB Miss Register */
+#define DSISR SPRN_DSISR /* Data Storage Interrupt Status Register */
+#define EAR SPRN_EAR /* External Address Register */
+#define ESR SPRN_ESR /* Exception Syndrome Register */
+#define HASH1 SPRN_HASH1 /* Primary Hash Address Register */
+#define HASH2 SPRN_HASH2 /* Secondary Hash Address Register */
+#define HID0 SPRN_HID0 /* Hardware Implementation Register 0 */
+#define HID1 SPRN_HID1 /* Hardware Implementation Register 1 */
+#define IABR SPRN_IABR /* Instruction Address Breakpoint Register */
+#define IAC1 SPRN_IAC1 /* Instruction Address Register 1 */
+#define IAC2 SPRN_IAC2 /* Instruction Address Register 2 */
+#define IBAT0L SPRN_IBAT0L /* Instruction BAT 0 Lower Register */
+#define IBAT0U SPRN_IBAT0U /* Instruction BAT 0 Upper Register */
+#define IBAT1L SPRN_IBAT1L /* Instruction BAT 1 Lower Register */
+#define IBAT1U SPRN_IBAT1U /* Instruction BAT 1 Upper Register */
+#define IBAT2L SPRN_IBAT2L /* Instruction BAT 2 Lower Register */
+#define IBAT2U SPRN_IBAT2U /* Instruction BAT 2 Upper Register */
+#define IBAT3L SPRN_IBAT3L /* Instruction BAT 3 Lower Register */
+#define IBAT3U SPRN_IBAT3U /* Instruction BAT 3 Upper Register */
+#define IBAT4L SPRN_IBAT4L /* Instruction BAT 4 Lower Register */
+#define IBAT4U SPRN_IBAT4U /* Instruction BAT 4 Upper Register */
+#define IBAT5L SPRN_IBAT5L /* Instruction BAT 5 Lower Register */
+#define IBAT5U SPRN_IBAT5U /* Instruction BAT 5 Upper Register */
+#define IBAT6L SPRN_IBAT6L /* Instruction BAT 6 Lower Register */
+#define IBAT6U SPRN_IBAT6U /* Instruction BAT 6 Upper Register */
+#define IBAT7L SPRN_IBAT7L /* Instruction BAT 7 Lower Register */
+#define IBAT7U SPRN_IBAT7U /* Instruction BAT 7 Lower Register */
+#define ICMP SPRN_ICMP /* Instruction TLB Compare Register */
+#define IMISS SPRN_IMISS /* Instruction TLB Miss Register */
+#define IMMR SPRN_IMMR /* PPC 860/821 Internal Memory Map Register */
+#define L2CR SPRN_L2CR /* PPC 750 L2 control register */
+#define LR SPRN_LR
+#define MBAR SPRN_MBAR /* System memory base address */
#if defined(CONFIG_E500)
#define PIR SPRN_PIR
#endif
-#define PVR SPRN_PVR /* Processor Version */
-#define RPA SPRN_RPA /* Required Physical Address Register */
-#define SDR1 SPRN_SDR1 /* MMU hash base register */
-#define SPR0 SPRN_SPRG0 /* Supervisor Private Registers */
-#define SPR1 SPRN_SPRG1
-#define SPR2 SPRN_SPRG2
-#define SPR3 SPRN_SPRG3
-#define SPRG0 SPRN_SPRG0
-#define SPRG1 SPRN_SPRG1
-#define SPRG2 SPRN_SPRG2
-#define SPRG3 SPRN_SPRG3
-#define SRR0 SPRN_SRR0 /* Save and Restore Register 0 */
-#define SRR1 SPRN_SRR1 /* Save and Restore Register 1 */
-#define TBRL SPRN_TBRL /* Time Base Read Lower Register */
-#define TBRU SPRN_TBRU /* Time Base Read Upper Register */
-#define TBWL SPRN_TBWL /* Time Base Write Lower Register */
-#define TBWU SPRN_TBWU /* Time Base Write Upper Register */
-#define TCR SPRN_TCR /* Timer Control Register */
-#define TSR SPRN_TSR /* Timer Status Register */
+#define PVR SPRN_PVR /* Processor Version */
+#define RPA SPRN_RPA /* Required Physical Address Register */
+#define SDR1 SPRN_SDR1 /* MMU hash base register */
+#define SPR0 SPRN_SPRG0 /* Supervisor Private Registers */
+#define SPR1 SPRN_SPRG1
+#define SPR2 SPRN_SPRG2
+#define SPR3 SPRN_SPRG3
+#define SPRG0 SPRN_SPRG0
+#define SPRG1 SPRN_SPRG1
+#define SPRG2 SPRN_SPRG2
+#define SPRG3 SPRN_SPRG3
+#define SRR0 SPRN_SRR0 /* Save and Restore Register 0 */
+#define SRR1 SPRN_SRR1 /* Save and Restore Register 1 */
+#define TBRL SPRN_TBRL /* Time Base Read Lower Register */
+#define TBRU SPRN_TBRU /* Time Base Read Upper Register */
+#define TBWL SPRN_TBWL /* Time Base Write Lower Register */
+#define TBWU SPRN_TBWU /* Time Base Write Upper Register */
+#define TCR SPRN_TCR /* Timer Control Register */
+#define TSR SPRN_TSR /* Timer Status Register */
#define ICTC 1019
-#define THRM1 SPRN_THRM1 /* Thermal Management Register 1 */
-#define THRM2 SPRN_THRM2 /* Thermal Management Register 2 */
-#define THRM3 SPRN_THRM3 /* Thermal Management Register 3 */
-#define XER SPRN_XER
+#define THRM1 SPRN_THRM1 /* Thermal Management Register 1 */
+#define THRM2 SPRN_THRM2 /* Thermal Management Register 2 */
+#define THRM3 SPRN_THRM3 /* Thermal Management Register 3 */
+#define XER SPRN_XER
-#define DECAR SPRN_DECAR
-#define CSRR0 SPRN_CSRR0
-#define CSRR1 SPRN_CSRR1
-#define IVPR SPRN_IVPR
-#define USPRG0 SPRN_USPRG0
-#define SPRG4R SPRN_SPRG4R
-#define SPRG5R SPRN_SPRG5R
-#define SPRG6R SPRN_SPRG6R
-#define SPRG7R SPRN_SPRG7R
-#define SPRG4W SPRN_SPRG4W
-#define SPRG5W SPRN_SPRG5W
-#define SPRG6W SPRN_SPRG6W
-#define SPRG7W SPRN_SPRG7W
+#define DECAR SPRN_DECAR
+#define CSRR0 SPRN_CSRR0
+#define CSRR1 SPRN_CSRR1
+#define IVPR SPRN_IVPR
+#define USPRG0 SPRN_USPRG0
+#define SPRG4R SPRN_SPRG4R
+#define SPRG5R SPRN_SPRG5R
+#define SPRG6R SPRN_SPRG6R
+#define SPRG7R SPRN_SPRG7R
+#define SPRG4W SPRN_SPRG4W
+#define SPRG5W SPRN_SPRG5W
+#define SPRG6W SPRN_SPRG6W
+#define SPRG7W SPRN_SPRG7W
#define DEAR SPRN_DEAR
-#define DBCR2 SPRN_DBCR2
-#define IAC3 SPRN_IAC3
-#define IAC4 SPRN_IAC4
-#define DVC1 SPRN_DVC1
-#define DVC2 SPRN_DVC2
-#define IVOR0 SPRN_IVOR0
-#define IVOR1 SPRN_IVOR1
-#define IVOR2 SPRN_IVOR2
-#define IVOR3 SPRN_IVOR3
-#define IVOR4 SPRN_IVOR4
-#define IVOR5 SPRN_IVOR5
-#define IVOR6 SPRN_IVOR6
-#define IVOR7 SPRN_IVOR7
-#define IVOR8 SPRN_IVOR8
-#define IVOR9 SPRN_IVOR9
-#define IVOR10 SPRN_IVOR10
-#define IVOR11 SPRN_IVOR11
-#define IVOR12 SPRN_IVOR12
-#define IVOR13 SPRN_IVOR13
-#define IVOR14 SPRN_IVOR14
-#define IVOR15 SPRN_IVOR15
+#define DBCR2 SPRN_DBCR2
+#define IAC3 SPRN_IAC3
+#define IAC4 SPRN_IAC4
+#define DVC1 SPRN_DVC1
+#define DVC2 SPRN_DVC2
+#define IVOR0 SPRN_IVOR0
+#define IVOR1 SPRN_IVOR1
+#define IVOR2 SPRN_IVOR2
+#define IVOR3 SPRN_IVOR3
+#define IVOR4 SPRN_IVOR4
+#define IVOR5 SPRN_IVOR5
+#define IVOR6 SPRN_IVOR6
+#define IVOR7 SPRN_IVOR7
+#define IVOR8 SPRN_IVOR8
+#define IVOR9 SPRN_IVOR9
+#define IVOR10 SPRN_IVOR10
+#define IVOR11 SPRN_IVOR11
+#define IVOR12 SPRN_IVOR12
+#define IVOR13 SPRN_IVOR13
+#define IVOR14 SPRN_IVOR14
+#define IVOR15 SPRN_IVOR15
#define IVOR32 SPRN_IVOR32
#define IVOR33 SPRN_IVOR33
#define IVOR34 SPRN_IVOR34
@@ -578,135 +580,135 @@
/* Device Control Registers */
-#define DCRN_BEAR 0x090 /* Bus Error Address Register */
-#define DCRN_BESR 0x091 /* Bus Error Syndrome Register */
-#define BESR_DSES 0x80000000 /* Data-Side Error Status */
-#define BESR_DMES 0x40000000 /* DMA Error Status */
-#define BESR_RWS 0x20000000 /* Read/Write Status */
-#define BESR_ETMASK 0x1C000000 /* Error Type */
-#define ET_PROT 0
-#define ET_PARITY 1
-#define ET_NCFG 2
-#define ET_BUSERR 4
-#define ET_BUSTO 6
-#define DCRN_DMACC0 0x0C4 /* DMA Chained Count Register 0 */
-#define DCRN_DMACC1 0x0CC /* DMA Chained Count Register 1 */
-#define DCRN_DMACC2 0x0D4 /* DMA Chained Count Register 2 */
-#define DCRN_DMACC3 0x0DC /* DMA Chained Count Register 3 */
-#define DCRN_DMACR0 0x0C0 /* DMA Channel Control Register 0 */
-#define DCRN_DMACR1 0x0C8 /* DMA Channel Control Register 1 */
-#define DCRN_DMACR2 0x0D0 /* DMA Channel Control Register 2 */
-#define DCRN_DMACR3 0x0D8 /* DMA Channel Control Register 3 */
-#define DCRN_DMACT0 0x0C1 /* DMA Count Register 0 */
-#define DCRN_DMACT1 0x0C9 /* DMA Count Register 1 */
-#define DCRN_DMACT2 0x0D1 /* DMA Count Register 2 */
-#define DCRN_DMACT3 0x0D9 /* DMA Count Register 3 */
-#define DCRN_DMADA0 0x0C2 /* DMA Destination Address Register 0 */
-#define DCRN_DMADA1 0x0CA /* DMA Destination Address Register 1 */
-#define DCRN_DMADA2 0x0D2 /* DMA Destination Address Register 2 */
-#define DCRN_DMADA3 0x0DA /* DMA Destination Address Register 3 */
-#define DCRN_DMASA0 0x0C3 /* DMA Source Address Register 0 */
-#define DCRN_DMASA1 0x0CB /* DMA Source Address Register 1 */
-#define DCRN_DMASA2 0x0D3 /* DMA Source Address Register 2 */
-#define DCRN_DMASA3 0x0DB /* DMA Source Address Register 3 */
-#define DCRN_DMASR 0x0E0 /* DMA Status Register */
-#define DCRN_EXIER 0x042 /* External Interrupt Enable Register */
-#define EXIER_CIE 0x80000000 /* Critical Interrupt Enable */
-#define EXIER_SRIE 0x08000000 /* Serial Port Rx Int. Enable */
-#define EXIER_STIE 0x04000000 /* Serial Port Tx Int. Enable */
-#define EXIER_JRIE 0x02000000 /* JTAG Serial Port Rx Int. Enable */
-#define EXIER_JTIE 0x01000000 /* JTAG Serial Port Tx Int. Enable */
-#define EXIER_D0IE 0x00800000 /* DMA Channel 0 Interrupt Enable */
-#define EXIER_D1IE 0x00400000 /* DMA Channel 1 Interrupt Enable */
-#define EXIER_D2IE 0x00200000 /* DMA Channel 2 Interrupt Enable */
-#define EXIER_D3IE 0x00100000 /* DMA Channel 3 Interrupt Enable */
-#define EXIER_E0IE 0x00000010 /* External Interrupt 0 Enable */
-#define EXIER_E1IE 0x00000008 /* External Interrupt 1 Enable */
-#define EXIER_E2IE 0x00000004 /* External Interrupt 2 Enable */
-#define EXIER_E3IE 0x00000002 /* External Interrupt 3 Enable */
-#define EXIER_E4IE 0x00000001 /* External Interrupt 4 Enable */
-#define DCRN_EXISR 0x040 /* External Interrupt Status Register */
-#define DCRN_IOCR 0x0A0 /* Input/Output Configuration Register */
-#define IOCR_E0TE 0x80000000
-#define IOCR_E0LP 0x40000000
-#define IOCR_E1TE 0x20000000
-#define IOCR_E1LP 0x10000000
-#define IOCR_E2TE 0x08000000
-#define IOCR_E2LP 0x04000000
-#define IOCR_E3TE 0x02000000
-#define IOCR_E3LP 0x01000000
-#define IOCR_E4TE 0x00800000
-#define IOCR_E4LP 0x00400000
-#define IOCR_EDT 0x00080000
-#define IOCR_SOR 0x00040000
-#define IOCR_EDO 0x00008000
-#define IOCR_2XC 0x00004000
-#define IOCR_ATC 0x00002000
-#define IOCR_SPD 0x00001000
-#define IOCR_BEM 0x00000800
-#define IOCR_PTD 0x00000400
-#define IOCR_ARE 0x00000080
-#define IOCR_DRC 0x00000020
-#define IOCR_RDM(x) (((x) & 0x3) << 3)
-#define IOCR_TCS 0x00000004
-#define IOCR_SCS 0x00000002
-#define IOCR_SPC 0x00000001
+#define DCRN_BEAR 0x090 /* Bus Error Address Register */
+#define DCRN_BESR 0x091 /* Bus Error Syndrome Register */
+#define BESR_DSES 0x80000000 /* Data-Side Error Status */
+#define BESR_DMES 0x40000000 /* DMA Error Status */
+#define BESR_RWS 0x20000000 /* Read/Write Status */
+#define BESR_ETMASK 0x1C000000 /* Error Type */
+#define ET_PROT 0
+#define ET_PARITY 1
+#define ET_NCFG 2
+#define ET_BUSERR 4
+#define ET_BUSTO 6
+#define DCRN_DMACC0 0x0C4 /* DMA Chained Count Register 0 */
+#define DCRN_DMACC1 0x0CC /* DMA Chained Count Register 1 */
+#define DCRN_DMACC2 0x0D4 /* DMA Chained Count Register 2 */
+#define DCRN_DMACC3 0x0DC /* DMA Chained Count Register 3 */
+#define DCRN_DMACR0 0x0C0 /* DMA Channel Control Register 0 */
+#define DCRN_DMACR1 0x0C8 /* DMA Channel Control Register 1 */
+#define DCRN_DMACR2 0x0D0 /* DMA Channel Control Register 2 */
+#define DCRN_DMACR3 0x0D8 /* DMA Channel Control Register 3 */
+#define DCRN_DMACT0 0x0C1 /* DMA Count Register 0 */
+#define DCRN_DMACT1 0x0C9 /* DMA Count Register 1 */
+#define DCRN_DMACT2 0x0D1 /* DMA Count Register 2 */
+#define DCRN_DMACT3 0x0D9 /* DMA Count Register 3 */
+#define DCRN_DMADA0 0x0C2 /* DMA Destination Address Register 0 */
+#define DCRN_DMADA1 0x0CA /* DMA Destination Address Register 1 */
+#define DCRN_DMADA2 0x0D2 /* DMA Destination Address Register 2 */
+#define DCRN_DMADA3 0x0DA /* DMA Destination Address Register 3 */
+#define DCRN_DMASA0 0x0C3 /* DMA Source Address Register 0 */
+#define DCRN_DMASA1 0x0CB /* DMA Source Address Register 1 */
+#define DCRN_DMASA2 0x0D3 /* DMA Source Address Register 2 */
+#define DCRN_DMASA3 0x0DB /* DMA Source Address Register 3 */
+#define DCRN_DMASR 0x0E0 /* DMA Status Register */
+#define DCRN_EXIER 0x042 /* External Interrupt Enable Register */
+#define EXIER_CIE 0x80000000 /* Critical Interrupt Enable */
+#define EXIER_SRIE 0x08000000 /* Serial Port Rx Int. Enable */
+#define EXIER_STIE 0x04000000 /* Serial Port Tx Int. Enable */
+#define EXIER_JRIE 0x02000000 /* JTAG Serial Port Rx Int. Enable */
+#define EXIER_JTIE 0x01000000 /* JTAG Serial Port Tx Int. Enable */
+#define EXIER_D0IE 0x00800000 /* DMA Channel 0 Interrupt Enable */
+#define EXIER_D1IE 0x00400000 /* DMA Channel 1 Interrupt Enable */
+#define EXIER_D2IE 0x00200000 /* DMA Channel 2 Interrupt Enable */
+#define EXIER_D3IE 0x00100000 /* DMA Channel 3 Interrupt Enable */
+#define EXIER_E0IE 0x00000010 /* External Interrupt 0 Enable */
+#define EXIER_E1IE 0x00000008 /* External Interrupt 1 Enable */
+#define EXIER_E2IE 0x00000004 /* External Interrupt 2 Enable */
+#define EXIER_E3IE 0x00000002 /* External Interrupt 3 Enable */
+#define EXIER_E4IE 0x00000001 /* External Interrupt 4 Enable */
+#define DCRN_EXISR 0x040 /* External Interrupt Status Register */
+#define DCRN_IOCR 0x0A0 /* Input/Output Configuration Register */
+#define IOCR_E0TE 0x80000000
+#define IOCR_E0LP 0x40000000
+#define IOCR_E1TE 0x20000000
+#define IOCR_E1LP 0x10000000
+#define IOCR_E2TE 0x08000000
+#define IOCR_E2LP 0x04000000
+#define IOCR_E3TE 0x02000000
+#define IOCR_E3LP 0x01000000
+#define IOCR_E4TE 0x00800000
+#define IOCR_E4LP 0x00400000
+#define IOCR_EDT 0x00080000
+#define IOCR_SOR 0x00040000
+#define IOCR_EDO 0x00008000
+#define IOCR_2XC 0x00004000
+#define IOCR_ATC 0x00002000
+#define IOCR_SPD 0x00001000
+#define IOCR_BEM 0x00000800
+#define IOCR_PTD 0x00000400
+#define IOCR_ARE 0x00000080
+#define IOCR_DRC 0x00000020
+#define IOCR_RDM(x) (((x) & 0x3) << 3)
+#define IOCR_TCS 0x00000004
+#define IOCR_SCS 0x00000002
+#define IOCR_SPC 0x00000001
/* Processor Version Register */
/* Processor Version Register (PVR) field extraction */
-#define PVR_VER(pvr) (((pvr) >> 16) & 0xFFFF) /* Version field */
-#define PVR_REV(pvr) (((pvr) >> 0) & 0xFFFF) /* Revison field */
+#define PVR_VER(pvr) (((pvr) >> 16) & 0xFFFF) /* Version field */
+#define PVR_REV(pvr) (((pvr) >> 0) & 0xFFFF) /* Revison field */
/*
* IBM has further subdivided the standard PowerPC 16-bit version and
* revision subfields of the PVR for the PowerPC 403s into the following:
*/
-#define PVR_FAM(pvr) (((pvr) >> 20) & 0xFFF) /* Family field */
-#define PVR_MEM(pvr) (((pvr) >> 16) & 0xF) /* Member field */
-#define PVR_CORE(pvr) (((pvr) >> 12) & 0xF) /* Core field */
-#define PVR_CFG(pvr) (((pvr) >> 8) & 0xF) /* Configuration field */
-#define PVR_MAJ(pvr) (((pvr) >> 4) & 0xF) /* Major revision field */
-#define PVR_MIN(pvr) (((pvr) >> 0) & 0xF) /* Minor revision field */
+#define PVR_FAM(pvr) (((pvr) >> 20) & 0xFFF) /* Family field */
+#define PVR_MEM(pvr) (((pvr) >> 16) & 0xF) /* Member field */
+#define PVR_CORE(pvr) (((pvr) >> 12) & 0xF) /* Core field */
+#define PVR_CFG(pvr) (((pvr) >> 8) & 0xF) /* Configuration field */
+#define PVR_MAJ(pvr) (((pvr) >> 4) & 0xF) /* Major revision field */
+#define PVR_MIN(pvr) (((pvr) >> 0) & 0xF) /* Minor revision field */
/* Processor Version Numbers */
-#define PVR_403GA 0x00200000
-#define PVR_403GB 0x00200100
-#define PVR_403GC 0x00200200
-#define PVR_403GCX 0x00201400
-#define PVR_405GP 0x40110000
-#define PVR_405GP_RB 0x40110040
-#define PVR_405GP_RC 0x40110082
-#define PVR_405GP_RD 0x401100C4
-#define PVR_405GP_RE 0x40110145 /* same as pc405cr rev c */
-#define PVR_405CR_RA 0x40110041
-#define PVR_405CR_RB 0x401100C5
-#define PVR_405CR_RC 0x40110145 /* same as pc405gp rev e */
-#define PVR_405EP_RA 0x51210950
-#define PVR_405GPR_RB 0x50910951
-#define PVR_440GP_RB 0x40120440
-#define PVR_440GP_RC 0x40120481
-#define PVR_440GX_RA 0x51B21850
-#define PVR_440GX_RB 0x51B21851
-#define PVR_405EP_RB 0x51210950
-#define PVR_601 0x00010000
-#define PVR_602 0x00050000
-#define PVR_603 0x00030000
-#define PVR_603e 0x00060000
-#define PVR_603ev 0x00070000
-#define PVR_603r 0x00071000
-#define PVR_604 0x00040000
-#define PVR_604e 0x00090000
-#define PVR_604r 0x000A0000
-#define PVR_620 0x00140000
-#define PVR_740 0x00080000
-#define PVR_750 PVR_740
-#define PVR_740P 0x10080000
-#define PVR_750P PVR_740P
+#define PVR_403GA 0x00200000
+#define PVR_403GB 0x00200100
+#define PVR_403GC 0x00200200
+#define PVR_403GCX 0x00201400
+#define PVR_405GP 0x40110000
+#define PVR_405GP_RB 0x40110040
+#define PVR_405GP_RC 0x40110082
+#define PVR_405GP_RD 0x401100C4
+#define PVR_405GP_RE 0x40110145 /* same as pc405cr rev c */
+#define PVR_405CR_RA 0x40110041
+#define PVR_405CR_RB 0x401100C5
+#define PVR_405CR_RC 0x40110145 /* same as pc405gp rev e */
+#define PVR_405EP_RA 0x51210950
+#define PVR_405GPR_RB 0x50910951
+#define PVR_440GP_RB 0x40120440
+#define PVR_440GP_RC 0x40120481
+#define PVR_440GX_RA 0x51B21850
+#define PVR_440GX_RB 0x51B21851
+#define PVR_405EP_RB 0x51210950
+#define PVR_601 0x00010000
+#define PVR_602 0x00050000
+#define PVR_603 0x00030000
+#define PVR_603e 0x00060000
+#define PVR_603ev 0x00070000
+#define PVR_603r 0x00071000
+#define PVR_604 0x00040000
+#define PVR_604e 0x00090000
+#define PVR_604r 0x000A0000
+#define PVR_620 0x00140000
+#define PVR_740 0x00080000
+#define PVR_750 PVR_740
+#define PVR_740P 0x10080000
+#define PVR_750P PVR_740P
#define PVR_7400 0x000C0000
#define PVR_7410 0x800C0000
#define PVR_7450 0x80000000
@@ -719,12 +721,12 @@
* differentiated by the version number in the Communication Processor
* Module (CPM).
*/
-#define PVR_821 0x00500000
-#define PVR_823 PVR_821
-#define PVR_850 PVR_821
-#define PVR_860 PVR_821
-#define PVR_7400 0x000C0000
-#define PVR_8240 0x00810100
+#define PVR_821 0x00500000
+#define PVR_823 PVR_821
+#define PVR_850 PVR_821
+#define PVR_860 PVR_821
+#define PVR_7400 0x000C0000
+#define PVR_8240 0x00810100
/*
* PowerQUICC II family processors report different PVR values depending
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index a53efe5..c73b53f 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -104,6 +104,10 @@
#if defined(CONFIG_NX823)
unsigned char bi_sernum[8];
#endif
+#if defined(CONFIG_440_GX)
+ int bi_phynum[4]; /* Determines phy mapping */
+ int bi_phymode[4]; /* Determines phy mode */
+#endif
} bd_t;
#endif /* __ASSEMBLY__ */
diff --git a/include/bmp_logo.h b/include/bmp_logo.h
index 265f744..9c924b8 100644
--- a/include/bmp_logo.h
+++ b/include/bmp_logo.h
@@ -18,7 +18,7 @@
0x0343, 0x0454, 0x0565, 0x0565, 0x0676, 0x0787, 0x0898, 0x0999,
0x0AAA, 0x0ABA, 0x0BCB, 0x0CCC, 0x0DDD, 0x0EEE, 0x0FFF, 0x0FB3,
0x0FB4, 0x0FC4, 0x0FC5, 0x0FC6, 0x0FD7, 0x0FD8, 0x0FD9, 0x0FDA,
- 0x0FEA, 0x0FEB, 0x0FEC, 0x0FFD, 0x0FFE, 0x0FFF, 0x0FFF,
+ 0x0FEA, 0x0FEB, 0x0FEC, 0x0FFD, 0x0FFE, 0x0FFF, 0x0FFF,
};
unsigned char bmp_logo_bitmap[] = {
diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h
index 845449c..8bdd293 100644
--- a/include/configs/XPEDITE1K.h
+++ b/include/configs/XPEDITE1K.h
@@ -37,7 +37,7 @@
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_440 1
#define CONFIG_440_GX 1 /* 440 GX */
-#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
#undef CFG_DRAM_TEST /* Disable-takes long time! */
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
@@ -235,7 +235,7 @@
#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
-
+#define CFG_PCI_FORCE_PCI_CONV /* Force PCI Conventional Mode */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is