defconfig: bk4/pcm052: Update bk4r1|pcm052_defconfig to support DM/DT
This commit updates BK4's and PCM052's config files to support as much
as possible device tree and model in u-boot.
Moreover, remove CONFIG_* from pcm052.h (as those are now in
bk4|pcm052_defconfig)
Signed-off-by: Lukasz Majewski <lukma@denx.de>
diff --git a/configs/bk4r1_defconfig b/configs/bk4r1_defconfig
index b67a394..e3852f4 100644
--- a/configs/bk4r1_defconfig
+++ b/configs/bk4r1_defconfig
@@ -2,15 +2,18 @@
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARCH_VF610=y
CONFIG_SYS_TEXT_BASE=0x3f401000
+CONFIG_SYS_MALLOC_F_LEN=0x800
CONFIG_TARGET_BK4R1=y
CONFIG_NR_DRAM_BANKS=1
+CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/pcm052/imximage.cfg"
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_EEPROM=y
+# CONFIG_CMD_ELF is not set
CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
@@ -19,19 +22,45 @@
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
+CONFIG_CMD_BOOTCOUNT=y
CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nand0=NAND,nor0=NOR"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=NAND:640k(bootloader),128k(env1),128k(env2),128k(dtb),6144k(kernel),-(root);NOR:-(nor)"
+CONFIG_MTDIDS_DEFAULT="nand0=vf610_nfc,nor0=NOR"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=vf610_nfc:2048k(bootloader),128k(env1),128k(env2),10240k(initrd),40960k(dtbkernel),-(system);NOR:-(nor)"
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="vf610-bk4r1"
CONFIG_ENV_IS_IN_NAND=y
+CONFIG_NETCONSOLE=y
CONFIG_DM=y
+CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_BOOTLIMIT=3
+CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0x4006e02c
CONFIG_DM_GPIO=y
CONFIG_VYBRID_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0x2
+CONFIG_SYS_I2C_MXC=y
+CONFIG_SYS_I2C_MXC_I2C1=y
+CONFIG_SYS_I2C_MXC_I2C2=y
+CONFIG_SYS_I2C_MXC_I2C3=y
+CONFIG_SYS_I2C_MXC_I2C4=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_MXC_OCOTP=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x50
+CONFIG_SYS_I2C_EEPROM_BUS=2
+CONFIG_SYS_EEPROM_SIZE=32768
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6
+CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
+CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC=y
+CONFIG_MTD=y
CONFIG_NAND_VF610_NFC=y
+CONFIG_NAND_VF610_NFC_DT=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
@@ -39,10 +68,18 @@
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_DM_ETH=y
+CONFIG_FEC_MXC=y
CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_VYBRID=y
+CONFIG_DM_RTC=y
CONFIG_RTC_M41T62=y
+# CONFIG_SPL_SERIAL_PRESENT is not set
+# CONFIG_TPL_SERIAL_PRESENT is not set
CONFIG_DM_SERIAL=y
CONFIG_FSL_LPUART=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_QSPI=y
+# CONFIG_EFI_LOADER is not set
diff --git a/configs/pcm052_defconfig b/configs/pcm052_defconfig
index 26ee823..906abbf 100644
--- a/configs/pcm052_defconfig
+++ b/configs/pcm052_defconfig
@@ -9,7 +9,6 @@
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_EEPROM=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
@@ -18,7 +17,6 @@
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
CONFIG_CMD_FAT=y
CONFIG_MTDIDS_DEFAULT="nand0=NAND"
CONFIG_MTDPARTS_DEFAULT="mtdparts=NAND:640k(bootloader),128k(env1),128k(env2),128k(dtb),6144k(kernel),-(root)"
@@ -29,12 +27,44 @@
CONFIG_DM=y
CONFIG_DM_GPIO=y
CONFIG_VYBRID_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0x2
+CONFIG_SYS_I2C_MXC=y
+CONFIG_SYS_I2C_MXC_I2C1=y
+CONFIG_SYS_I2C_MXC_I2C2=y
+CONFIG_SYS_I2C_MXC_I2C3=y
+CONFIG_SYS_I2C_MXC_I2C4=y
+CONFIG_MISC=y
+CONFIG_MXC_OCOTP=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x50
+CONFIG_SYS_I2C_EEPROM_BUS=2
+CONFIG_SYS_EEPROM_SIZE=32768
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6
+CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
+CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC=y
+CONFIG_MTD=y
CONFIG_NAND_VF610_NFC=y
+CONFIG_NAND_VF610_NFC_DT=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_MTD=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_DM_ETH=y
+CONFIG_FEC_MXC=y
CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_VYBRID=y
+CONFIG_DM_RTC=y
CONFIG_RTC_M41T62=y
CONFIG_DM_SERIAL=y
CONFIG_FSL_LPUART=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_QSPI=y
+# CONFIG_EFI_LOADER is not set
diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h
index e125a38..c2ecb7e 100644
--- a/include/configs/pcm052.h
+++ b/include/configs/pcm052.h
@@ -24,48 +24,14 @@
/* NAND support */
#define CONFIG_SYS_NAND_ONFI_DETECTION
-#ifdef CONFIG_CMD_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
-
-#define CONFIG_JFFS2_NAND
-
-/* Dynamic MTD partition support */
-
-#endif
-
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-#define CONFIG_SYS_FSL_ESDHC_NUM 1
-
-/*#define CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ1*/
-
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE RMII
-#define CONFIG_FEC_MXC_PHYADDR 0
-
/* QSPI Configs*/
-
#ifdef CONFIG_FSL_QSPI
#define FSL_QSPI_FLASH_SIZE (1 << 24)
#define FSL_QSPI_FLASH_NUM 2
#define CONFIG_SYS_FSL_QSPI_LE
#endif
-/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC_I2C3
-#define CONFIG_SYS_I2C_MXC
-
-/* RTC (actually an RV-4162 but M41T62-compatible) */
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-#define CONFIG_SYS_RTC_BUS_NUM 2
-
-/* EEPROM (24FC256) */
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_I2C_EEPROM_BUS 2
-
#define CONFIG_LOADADDR 0x82000000