Merge branch 'qcom-main' of https://gitlab.denx.de/u-boot/custodians/u-boot-snapdragon
* Qualcomm platforms >~2016 gain support for the RPMh (Resource Power Manager)
peripheral which is used to control most regulators. The RB5 is now able to
power up its USB VBUS regulator via the rpmh regulator driver. Git history
from the original Linux driver is preserved for ease of maintenance.
* IPQ40xx SoCs gain ethernet networking support via the new ESS EDMA driver.
diff --git a/arch/arm/dts/qcom-ipq4019-u-boot.dtsi b/arch/arm/dts/qcom-ipq4019-u-boot.dtsi
new file mode 100644
index 0000000..07aaaa9
--- /dev/null
+++ b/arch/arm/dts/qcom-ipq4019-u-boot.dtsi
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/ {
+ soc {
+ switch: switch@c000000 {
+ compatible = "qcom,ipq4019-ess";
+ reg = <0xc000000 0x80000>, <0x98000 0x800>, <0xc080000 0x8000>;
+ reg-names = "base", "psgmii_phy", "edma";
+ resets = <&gcc ESS_PSGMII_ARES>, <&gcc ESS_RESET>;
+ reset-names = "psgmii", "ess";
+ clocks = <&gcc GCC_ESS_CLK>;
+ clock-names = "ess";
+ mdio = <&mdio>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 69 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 71 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 76 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 77 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 240 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 242 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 243 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 244 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 245 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 246 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 248 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 249 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 251 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 252 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 253 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 254 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 255 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ swport1: port@1 { /* MAC1 */
+ reg = <1>;
+ label = "lan1";
+ phy-handle = <ðphy0>;
+ phy-mode = "psgmii";
+
+ status = "disabled";
+ };
+
+ swport2: port@2 { /* MAC2 */
+ reg = <2>;
+ label = "lan2";
+ phy-handle = <ðphy1>;
+ phy-mode = "psgmii";
+
+ status = "disabled";
+ };
+
+ swport3: port@3 { /* MAC3 */
+ reg = <3>;
+ label = "lan3";
+ phy-handle = <ðphy2>;
+ phy-mode = "psgmii";
+
+ status = "disabled";
+ };
+
+ swport4: port@4 { /* MAC4 */
+ reg = <4>;
+ label = "lan4";
+ phy-handle = <ðphy3>;
+ phy-mode = "psgmii";
+
+ status = "disabled";
+ };
+
+ swport5: port@5 { /* MAC5 */
+ reg = <5>;
+ label = "wan";
+ phy-handle = <ðphy4>;
+ phy-mode = "psgmii";
+
+ status = "disabled";
+ };
+ };
+ };
+ };
+};
+
+&mdio {
+ psgmiiphy: psgmii-phy@5 {
+ reg = <5>;
+ };
+};
diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig
index 4942237..419e969 100644
--- a/configs/qcom_defconfig
+++ b/configs/qcom_defconfig
@@ -33,6 +33,7 @@
CONFIG_CMD_USB=y
CONFIG_CMD_CAT=y
CONFIG_CMD_BMP=y
+CONFIG_CMD_REGULATOR=y
CONFIG_CMD_LOG=y
CONFIG_OF_LIVE=y
CONFIG_BUTTON_QCOM_PMIC=y
@@ -90,9 +91,13 @@
CONFIG_PMIC_QCOM=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_QCOM_RPMH=y
CONFIG_SCSI=y
CONFIG_MSM_SERIAL=y
CONFIG_MSM_GENI_SERIAL=y
+CONFIG_SOC_QCOM=y
+CONFIG_QCOM_COMMAND_DB=y
+CONFIG_QCOM_RPMH=y
CONFIG_SPMI_MSM=y
CONFIG_SYSINFO=y
CONFIG_SYSINFO_SMBIOS=y
diff --git a/drivers/clk/qcom/clock-ipq4019.c b/drivers/clk/qcom/clock-ipq4019.c
index 9352ff4..f6760c6 100644
--- a/drivers/clk/qcom/clock-ipq4019.c
+++ b/drivers/clk/qcom/clock-ipq4019.c
@@ -64,6 +64,9 @@
case GCC_USB2_MOCK_UTMI_CLK:
/* These clocks is already initialized by SBL1 */
return 0;
+ case GCC_ESS_CLK:
+ /* This clock is already initialized by SBL1 */
+ return 0;
default:
return -EINVAL;
}
@@ -141,6 +144,12 @@
[GCC_TCSR_BCR] = {0x22000, 0},
[GCC_MPM_BCR] = {0x24000, 0},
[GCC_SPDM_BCR] = {0x25000, 0},
+ [ESS_MAC1_ARES] = {0x1200C, 0},
+ [ESS_MAC2_ARES] = {0x1200C, 1},
+ [ESS_MAC3_ARES] = {0x1200C, 2},
+ [ESS_MAC4_ARES] = {0x1200C, 3},
+ [ESS_MAC5_ARES] = {0x1200C, 4},
+ [ESS_PSGMII_ARES] = {0x1200C, 5},
};
static struct msm_clk_data ipq4019_clk_data = {
diff --git a/drivers/core/root.c b/drivers/core/root.c
index 7cf6607..7a714f5 100644
--- a/drivers/core/root.c
+++ b/drivers/core/root.c
@@ -243,7 +243,8 @@
const char * const nodes[] = {
"/chosen",
"/clocks",
- "/firmware"
+ "/firmware",
+ "/reserved-memory",
};
ret = dm_scan_fdt(pre_reloc_only);
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index b4ff033..69ae7c0 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -325,6 +325,14 @@
This driver supports Intel(R) PRO/100 82557/82559/82559ER fast
ethernet family of adapters.
+config ESSEDMA
+ bool "Qualcomm ESS Edma support"
+ depends on DM_ETH && ARCH_IPQ40XX
+ select PHYLIB
+ help
+ This driver supports ethernet DMA adapter found in
+ Qualcomm IPQ40xx series SoC-s.
+
config ETH_SANDBOX
depends on SANDBOX
default y
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index dce7168..425dd72 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -29,6 +29,7 @@
obj-$(CONFIG_E1000) += e1000.o
obj-$(CONFIG_E1000_SPI) += e1000_spi.o
obj-$(CONFIG_EEPRO100) += eepro100.o
+obj-$(CONFIG_ESSEDMA) += essedma.o
obj-$(CONFIG_ETHOC) += ethoc.o
obj-$(CONFIG_ETH_DESIGNWARE) += designware.o
obj-$(CONFIG_ETH_DESIGNWARE_MESON8B) += dwmac_meson8b.o
diff --git a/drivers/net/essedma.c b/drivers/net/essedma.c
new file mode 100644
index 0000000..fccc5f5
--- /dev/null
+++ b/drivers/net/essedma.c
@@ -0,0 +1,1192 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2020 Sartura Ltd.
+ *
+ * Author: Robert Marko <robert.marko@sartura.hr>
+ *
+ * Copyright (c) 2021 Toco Technologies FZE <contact@toco.ae>
+ * Copyright (c) 2021 Gabor Juhos <j4g8y7@gmail.com>
+ *
+ * Qualcomm ESS EDMA ethernet driver
+ */
+
+#include <asm/io.h>
+#include <clk.h>
+#include <cpu_func.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <errno.h>
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <log.h>
+#include <miiphy.h>
+#include <net.h>
+#include <reset.h>
+
+#include "essedma.h"
+
+#define EDMA_MAX_PKT_SIZE (PKTSIZE_ALIGN + PKTALIGN)
+
+#define EDMA_RXQ_ID 0
+#define EDMA_TXQ_ID 0
+
+/* descriptor ring */
+struct edma_ring {
+ u16 count; /* number of descriptors in the ring */
+ void *hw_desc; /* descriptor ring virtual address */
+ unsigned int hw_size; /* hw descriptor ring length in bytes */
+ dma_addr_t dma; /* descriptor ring physical address */
+ u16 head; /* next Tx descriptor to fill */
+ u16 tail; /* next Tx descriptor to clean */
+};
+
+struct ess_switch {
+ phys_addr_t base;
+ struct phy_device *phydev[ESS_PORTS_NUM];
+ u32 phy_mask;
+ ofnode ports_node;
+ phy_interface_t port_wrapper_mode;
+ int num_phy;
+};
+
+struct essedma_priv {
+ phys_addr_t base;
+ struct udevice *dev;
+ struct clk ess_clk;
+ struct reset_ctl ess_rst;
+ struct udevice *mdio_dev;
+ struct ess_switch esw;
+ phys_addr_t psgmii_base;
+ struct edma_ring tpd_ring;
+ struct edma_ring rfd_ring;
+};
+
+static void esw_port_loopback_set(struct ess_switch *esw, int port,
+ bool enable)
+{
+ u32 t;
+
+ t = readl(esw->base + ESS_PORT_LOOKUP_CTRL(port));
+ if (enable)
+ t |= ESS_PORT_LOOP_BACK_EN;
+ else
+ t &= ~ESS_PORT_LOOP_BACK_EN;
+ writel(t, esw->base + ESS_PORT_LOOKUP_CTRL(port));
+}
+
+static void esw_port_loopback_set_all(struct ess_switch *esw, bool enable)
+{
+ int i;
+
+ for (i = 1; i < ESS_PORTS_NUM; i++)
+ esw_port_loopback_set(esw, i, enable);
+}
+
+static void ess_reset(struct udevice *dev)
+{
+ struct essedma_priv *priv = dev_get_priv(dev);
+
+ reset_assert(&priv->ess_rst);
+ mdelay(10);
+
+ reset_deassert(&priv->ess_rst);
+ mdelay(10);
+}
+
+void qca8075_ess_reset(struct udevice *dev)
+{
+ struct essedma_priv *priv = dev_get_priv(dev);
+ struct phy_device *psgmii_phy;
+ int i, val;
+
+ /* Find the PSGMII PHY */
+ psgmii_phy = priv->esw.phydev[priv->esw.num_phy - 1];
+
+ /* Fix phy psgmii RX 20bit */
+ phy_write(psgmii_phy, MDIO_DEVAD_NONE, MII_BMCR, 0x005b);
+
+ /* Reset phy psgmii */
+ phy_write(psgmii_phy, MDIO_DEVAD_NONE, MII_BMCR, 0x001b);
+
+ /* Release reset phy psgmii */
+ phy_write(psgmii_phy, MDIO_DEVAD_NONE, MII_BMCR, 0x005b);
+ for (i = 0; i < 100; i++) {
+ val = phy_read_mmd(psgmii_phy, MDIO_MMD_PMAPMD, 0x28);
+ if (val & 0x1)
+ break;
+ mdelay(1);
+ }
+ if (i >= 100)
+ printf("QCA807x PSGMII PLL_VCO_CALIB Not Ready\n");
+
+ /*
+ * Check qca8075 psgmii calibration done end.
+ * Freeze phy psgmii RX CDR
+ */
+ phy_write(psgmii_phy, MDIO_DEVAD_NONE, 0x1a, 0x2230);
+
+ ess_reset(dev);
+
+ /* Check ipq psgmii calibration done start */
+ for (i = 0; i < 100; i++) {
+ val = readl(priv->psgmii_base + PSGMIIPHY_VCO_CALIBRATION_CTRL_REGISTER_2);
+ if (val & 0x1)
+ break;
+ mdelay(1);
+ }
+ if (i >= 100)
+ printf("PSGMII PLL_VCO_CALIB Not Ready\n");
+
+ /*
+ * Check ipq psgmii calibration done end.
+ * Relesae phy psgmii RX CDR
+ */
+ phy_write(psgmii_phy, MDIO_DEVAD_NONE, 0x1a, 0x3230);
+
+ /* Release phy psgmii RX 20bit */
+ phy_write(psgmii_phy, MDIO_DEVAD_NONE, MII_BMCR, 0x005f);
+}
+
+#define PSGMII_ST_NUM_RETRIES 20
+#define PSGMII_ST_PKT_COUNT (4 * 1024)
+#define PSGMII_ST_PKT_SIZE 1504
+
+/*
+ * Transmitting one byte over a 1000Mbps link requires 8 ns.
+ * Additionally, use + 1 ns for safety to compensate latencies
+ * and such.
+ */
+#define PSGMII_ST_TRAFFIC_TIMEOUT_NS \
+ (PSGMII_ST_PKT_COUNT * PSGMII_ST_PKT_SIZE * (8 + 1))
+
+#define PSGMII_ST_TRAFFIC_TIMEOUT \
+ DIV_ROUND_UP(PSGMII_ST_TRAFFIC_TIMEOUT_NS, 1000000)
+
+static bool psgmii_self_test_repeat;
+
+static void psgmii_st_phy_power_down(struct phy_device *phydev)
+{
+ int val;
+
+ val = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR);
+ val |= QCA807X_POWER_DOWN;
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, val);
+}
+
+static void psgmii_st_phy_prepare(struct phy_device *phydev)
+{
+ int val;
+
+ /* check phydev combo port */
+ val = phy_read(phydev, MDIO_DEVAD_NONE,
+ QCA807X_CHIP_CONFIGURATION);
+ if (val) {
+ /* Select copper page */
+ val |= QCA807X_MEDIA_PAGE_SELECT;
+ phy_write(phydev, MDIO_DEVAD_NONE,
+ QCA807X_CHIP_CONFIGURATION, val);
+ }
+
+ /* Force no link by power down */
+ psgmii_st_phy_power_down(phydev);
+
+ /* Packet number (Non documented) */
+ phy_write_mmd(phydev, MDIO_MMD_AN, 0x8021, PSGMII_ST_PKT_COUNT);
+ phy_write_mmd(phydev, MDIO_MMD_AN, 0x8062, PSGMII_ST_PKT_SIZE);
+
+ /* Fix MDI status */
+ val = phy_read(phydev, MDIO_DEVAD_NONE, QCA807X_FUNCTION_CONTROL);
+ val &= ~QCA807X_MDI_CROSSOVER_MODE_MASK;
+ val |= FIELD_PREP(QCA807X_MDI_CROSSOVER_MODE_MASK,
+ QCA807X_MDI_CROSSOVER_MODE_MANUAL_MDI);
+ val &= ~QCA807X_POLARITY_REVERSAL;
+ phy_write(phydev, MDIO_DEVAD_NONE, QCA807X_FUNCTION_CONTROL, val);
+}
+
+static void psgmii_st_phy_recover(struct phy_device *phydev)
+{
+ int val;
+
+ /* Packet number (Non documented) */
+ phy_write_mmd(phydev, MDIO_MMD_AN, 0x8021, 0x0);
+
+ /* Disable CRC checker and packet counter */
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, QCA807X_MMD7_CRC_PACKET_COUNTER);
+ val &= ~QCA807X_MMD7_PACKET_COUNTER_SELFCLR;
+ val &= ~QCA807X_MMD7_CRC_PACKET_COUNTER_EN;
+ phy_write_mmd(phydev, MDIO_MMD_AN, QCA807X_MMD7_CRC_PACKET_COUNTER, val);
+
+ /* Disable traffic (Undocumented) */
+ phy_write_mmd(phydev, MDIO_MMD_AN, 0x8020, 0x0);
+}
+
+static void psgmii_st_phy_start_traffic(struct phy_device *phydev)
+{
+ int val;
+
+ /* Enable CRC checker and packet counter */
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, QCA807X_MMD7_CRC_PACKET_COUNTER);
+ val |= QCA807X_MMD7_CRC_PACKET_COUNTER_EN;
+ phy_write_mmd(phydev, MDIO_MMD_AN, QCA807X_MMD7_CRC_PACKET_COUNTER, val);
+
+ /* Start traffic (Undocumented) */
+ phy_write_mmd(phydev, MDIO_MMD_AN, 0x8020, 0xa000);
+}
+
+static bool psgmii_st_phy_check_counters(struct phy_device *phydev)
+{
+ u32 tx_ok;
+
+ /*
+ * The number of test packets is limited to 65535 so
+ * only read the lower 16 bits of the counter.
+ */
+ tx_ok = phy_read_mmd(phydev, MDIO_MMD_AN,
+ QCA807X_MMD7_VALID_EGRESS_COUNTER_2);
+
+ return (tx_ok == PSGMII_ST_PKT_COUNT);
+}
+
+static void psgmii_st_phy_reset_loopback(struct phy_device *phydev)
+{
+ /* reset the PHY */
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, 0x9000);
+
+ /* enable loopback mode */
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, 0x4140);
+}
+
+static inline bool psgmii_st_phy_link_is_up(struct phy_device *phydev)
+{
+ int val;
+
+ val = phy_read(phydev, MDIO_DEVAD_NONE, QCA807X_PHY_SPECIFIC);
+ return !!(val & QCA807X_PHY_SPECIFIC_LINK);
+}
+
+static bool psgmii_st_phy_wait(struct ess_switch *esw, u32 mask,
+ int retries, int delay,
+ bool (*check)(struct phy_device *))
+{
+ int i;
+
+ for (i = 0; i < retries; i++) {
+ int phy;
+
+ for (phy = 0; phy < esw->num_phy - 1; phy++) {
+ u32 phybit = BIT(phy);
+
+ if (!(mask & phybit))
+ continue;
+
+ if (check(esw->phydev[phy]))
+ mask &= ~phybit;
+ }
+
+ if (!mask)
+ break;
+
+ mdelay(delay);
+ }
+
+ return (!mask);
+}
+
+static bool psgmii_st_phy_wait_link(struct ess_switch *esw, u32 mask)
+{
+ return psgmii_st_phy_wait(esw, mask, 100, 10,
+ psgmii_st_phy_link_is_up);
+}
+
+static bool psgmii_st_phy_wait_tx_complete(struct ess_switch *esw, u32 mask)
+{
+ return psgmii_st_phy_wait(esw, mask, PSGMII_ST_TRAFFIC_TIMEOUT, 1,
+ psgmii_st_phy_check_counters);
+}
+
+static bool psgmii_st_run_test_serial(struct ess_switch *esw)
+{
+ bool result = true;
+ int i;
+
+ for (i = 0; i < esw->num_phy - 1; i++) {
+ struct phy_device *phydev = esw->phydev[i];
+
+ psgmii_st_phy_reset_loopback(phydev);
+
+ psgmii_st_phy_wait_link(esw, BIT(i));
+
+ psgmii_st_phy_start_traffic(phydev);
+
+ /* wait for the traffic to complete */
+ result &= psgmii_st_phy_wait_tx_complete(esw, BIT(i));
+
+ /* Power down */
+ psgmii_st_phy_power_down(phydev);
+
+ if (!result)
+ break;
+ }
+
+ return result;
+}
+
+static bool psgmii_st_run_test_parallel(struct ess_switch *esw)
+{
+ bool result;
+ int i;
+
+ /* enable loopback mode on all PHYs */
+ for (i = 0; i < esw->num_phy - 1; i++)
+ psgmii_st_phy_reset_loopback(esw->phydev[i]);
+
+ psgmii_st_phy_wait_link(esw, esw->phy_mask);
+
+ /* start traffic on all PHYs parallely */
+ for (i = 0; i < esw->num_phy - 1; i++)
+ psgmii_st_phy_start_traffic(esw->phydev[i]);
+
+ /* wait for the traffic to complete on all PHYs */
+ result = psgmii_st_phy_wait_tx_complete(esw, esw->phy_mask);
+
+ /* Power down all PHYs */
+ for (i = 0; i < esw->num_phy - 1; i++)
+ psgmii_st_phy_power_down(esw->phydev[i]);
+
+ return result;
+}
+
+struct psgmii_st_stats {
+ int succeed;
+ int failed;
+ int failed_max;
+ int failed_cont;
+};
+
+static void psgmii_st_update_stats(struct psgmii_st_stats *stats,
+ bool success)
+{
+ if (success) {
+ stats->succeed++;
+ stats->failed_cont = 0;
+ return;
+ }
+
+ stats->failed++;
+ stats->failed_cont++;
+ if (stats->failed_max < stats->failed_cont)
+ stats->failed_max = stats->failed_cont;
+}
+
+static void psgmii_self_test(struct udevice *dev)
+{
+ struct essedma_priv *priv = dev_get_priv(dev);
+ struct ess_switch *esw = &priv->esw;
+ struct psgmii_st_stats stats;
+ bool result = false;
+ unsigned long tm;
+ int i;
+
+ memset(&stats, 0, sizeof(stats));
+
+ tm = get_timer(0);
+
+ for (i = 0; i < esw->num_phy - 1; i++)
+ psgmii_st_phy_prepare(esw->phydev[i]);
+
+ for (i = 0; i < PSGMII_ST_NUM_RETRIES; i++) {
+ qca8075_ess_reset(dev);
+
+ /* enable loopback mode on the switch's ports */
+ esw_port_loopback_set_all(esw, true);
+
+ /* run test on each PHYs individually after each other */
+ result = psgmii_st_run_test_serial(esw);
+
+ if (result) {
+ /* run test on each PHYs parallely */
+ result = psgmii_st_run_test_parallel(esw);
+ }
+
+ psgmii_st_update_stats(&stats, result);
+
+ if (psgmii_self_test_repeat)
+ continue;
+
+ if (result)
+ break;
+ }
+
+ for (i = 0; i < esw->num_phy - 1; i++) {
+ /* Configuration recover */
+ psgmii_st_phy_recover(esw->phydev[i]);
+
+ /* Disable loopback */
+ phy_write(esw->phydev[i], MDIO_DEVAD_NONE,
+ QCA807X_FUNCTION_CONTROL, 0x6860);
+ phy_write(esw->phydev[i], MDIO_DEVAD_NONE, MII_BMCR, 0x9040);
+ }
+
+ /* disable loopback mode on the switch's ports */
+ esw_port_loopback_set_all(esw, false);
+
+ tm = get_timer(tm);
+ dev_dbg(priv->dev, "\nPSGMII self-test: succeed %d, failed %d (max %d), duration %lu.%03lu secs\n",
+ stats.succeed, stats.failed, stats.failed_max,
+ tm / 1000, tm % 1000);
+}
+
+static int ess_switch_disable_lookup(struct ess_switch *esw)
+{
+ int val;
+ int i;
+
+ /* Disable port lookup for all ports*/
+ for (i = 0; i < ESS_PORTS_NUM; i++) {
+ int ess_port_vid;
+
+ val = readl(esw->base + ESS_PORT_LOOKUP_CTRL(i));
+ val &= ~ESS_PORT_VID_MEM_MASK;
+
+ switch (i) {
+ case 0:
+ fallthrough;
+ case 5:
+ /* CPU,WAN port -> nothing */
+ ess_port_vid = 0;
+ break;
+ case 1 ... 4:
+ /* LAN ports -> all other LAN ports */
+ ess_port_vid = GENMASK(4, 1);
+ ess_port_vid &= ~BIT(i);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ val |= FIELD_PREP(ESS_PORT_VID_MEM_MASK, ess_port_vid);
+
+ writel(val, esw->base + ESS_PORT_LOOKUP_CTRL(i));
+ }
+
+ /* Set magic value for the global forwarding register 1 */
+ writel(0x3e3e3e, esw->base + ESS_GLOBAL_FW_CTRL1);
+
+ return 0;
+}
+
+static int ess_switch_enable_lookup(struct ess_switch *esw)
+{
+ int val;
+ int i;
+
+ /* Enable port lookup for all ports*/
+ for (i = 0; i < ESS_PORTS_NUM; i++) {
+ int ess_port_vid;
+
+ val = readl(esw->base + ESS_PORT_LOOKUP_CTRL(i));
+ val &= ~ESS_PORT_VID_MEM_MASK;
+
+ switch (i) {
+ case 0:
+ /* CPU port -> all other ports */
+ ess_port_vid = GENMASK(5, 1);
+ break;
+ case 1 ... 4:
+ /* LAN ports -> CPU and all other LAN ports */
+ ess_port_vid = GENMASK(4, 0);
+ ess_port_vid &= ~BIT(i);
+ break;
+ case 5:
+ /* WAN port -> CPU port only */
+ ess_port_vid = BIT(0);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ val |= FIELD_PREP(ESS_PORT_VID_MEM_MASK, ess_port_vid);
+
+ writel(val, esw->base + ESS_PORT_LOOKUP_CTRL(i));
+ }
+
+ /* Set magic value for the global forwarding register 1 */
+ writel(0x3f3f3f, esw->base + ESS_GLOBAL_FW_CTRL1);
+
+ return 0;
+}
+
+static void ess_switch_init(struct ess_switch *esw)
+{
+ int val = 0;
+ int i;
+
+ /* Set magic value for the global forwarding register 1 */
+ writel(0x3e3e3e, esw->base + ESS_GLOBAL_FW_CTRL1);
+
+ /* Set 1000M speed, full duplex and RX/TX flow control for the CPU port*/
+ val &= ~ESS_PORT_SPEED_MASK;
+ val |= FIELD_PREP(ESS_PORT_SPEED_MASK, ESS_PORT_SPEED_1000);
+ val |= ESS_PORT_DUPLEX_MODE;
+ val |= ESS_PORT_TX_FLOW_EN;
+ val |= ESS_PORT_RX_FLOW_EN;
+
+ writel(val, esw->base + ESS_PORT0_STATUS);
+
+ /* Disable port lookup for all ports*/
+ for (i = 0; i < ESS_PORTS_NUM; i++) {
+ val = readl(esw->base + ESS_PORT_LOOKUP_CTRL(i));
+ val &= ~ESS_PORT_VID_MEM_MASK;
+
+ writel(val, esw->base + ESS_PORT_LOOKUP_CTRL(i));
+ }
+
+ /* Set HOL settings for all ports*/
+ for (i = 0; i < ESS_PORTS_NUM; i++) {
+ val = 0;
+
+ val |= FIELD_PREP(EG_PORT_QUEUE_NUM_MASK, 30);
+ if (i == 0 || i == 5) {
+ val |= FIELD_PREP(EG_PRI5_QUEUE_NUM_MASK, 4);
+ val |= FIELD_PREP(EG_PRI4_QUEUE_NUM_MASK, 4);
+ }
+ val |= FIELD_PREP(EG_PRI3_QUEUE_NUM_MASK, 4);
+ val |= FIELD_PREP(EG_PRI2_QUEUE_NUM_MASK, 4);
+ val |= FIELD_PREP(EG_PRI1_QUEUE_NUM_MASK, 4);
+ val |= FIELD_PREP(EG_PRI0_QUEUE_NUM_MASK, 4);
+
+ writel(val, esw->base + ESS_PORT_HOL_CTRL0(i));
+
+ val = readl(esw->base + ESS_PORT_HOL_CTRL1(i));
+ val &= ~ESS_ING_BUF_NUM_0_MASK;
+ val |= FIELD_PREP(ESS_ING_BUF_NUM_0_MASK, 6);
+
+ writel(val, esw->base + ESS_PORT_HOL_CTRL1(i));
+ }
+
+ /* Give switch some time */
+ mdelay(1);
+
+ /* Enable RX and TX MAC-s */
+ val = readl(esw->base + ESS_PORT0_STATUS);
+ val |= ESS_PORT_TXMAC_EN;
+ val |= ESS_PORT_RXMAC_EN;
+
+ writel(val, esw->base + ESS_PORT0_STATUS);
+
+ /* Set magic value for the global forwarding register 1 */
+ writel(0x7f7f7f, esw->base + ESS_GLOBAL_FW_CTRL1);
+}
+
+static int essedma_of_phy(struct udevice *dev)
+{
+ struct essedma_priv *priv = dev_get_priv(dev);
+ struct ess_switch *esw = &priv->esw;
+ int num_phy = 0, ret = 0;
+ ofnode node;
+ int i;
+
+ ofnode_for_each_subnode(node, esw->ports_node) {
+ struct ofnode_phandle_args phandle_args;
+ struct phy_device *phydev;
+ u32 phy_addr;
+
+ if (ofnode_is_enabled(node)) {
+ if (ofnode_parse_phandle_with_args(node, "phy-handle", NULL, 0, 0,
+ &phandle_args)) {
+ dev_dbg(priv->dev, "Failed to find phy-handle\n");
+ return -ENODEV;
+ }
+
+ ret = ofnode_read_u32(phandle_args.node, "reg", &phy_addr);
+ if (ret) {
+ dev_dbg(priv->dev, "Missing reg property in PHY node %s\n",
+ ofnode_get_name(phandle_args.node));
+ return ret;
+ }
+
+ phydev = dm_mdio_phy_connect(priv->mdio_dev, phy_addr,
+ dev, priv->esw.port_wrapper_mode);
+ if (!phydev) {
+ dev_dbg(priv->dev, "Failed to find phy on addr %d\n", phy_addr);
+ return -ENODEV;
+ }
+
+ phydev->node = phandle_args.node;
+ ret = phy_config(phydev);
+
+ esw->phydev[num_phy] = phydev;
+
+ num_phy++;
+ }
+ }
+
+ esw->num_phy = num_phy;
+
+ for (i = 0; i < esw->num_phy - 1; i++)
+ esw->phy_mask |= BIT(i);
+
+ return ret;
+}
+
+static int essedma_of_switch(struct udevice *dev)
+{
+ struct essedma_priv *priv = dev_get_priv(dev);
+ int port_wrapper_mode = -1;
+
+ priv->esw.ports_node = ofnode_find_subnode(dev_ofnode(dev), "ports");
+ if (!ofnode_valid(priv->esw.ports_node)) {
+ printf("Failed to find ports node\n");
+ return -EINVAL;
+ }
+
+ port_wrapper_mode = ofnode_read_phy_mode(priv->esw.ports_node);
+ if (port_wrapper_mode == -1)
+ return -EINVAL;
+
+ priv->esw.port_wrapper_mode = port_wrapper_mode;
+
+ return essedma_of_phy(dev);
+}
+
+static void ipq40xx_edma_start_rx_tx(struct essedma_priv *priv)
+{
+ volatile u32 data;
+
+ /* enable RX queues */
+ data = readl(priv->base + EDMA_REG_RXQ_CTRL);
+ data |= EDMA_RXQ_CTRL_EN;
+ writel(data, priv->base + EDMA_REG_RXQ_CTRL);
+
+ /* enable TX queues */
+ data = readl(priv->base + EDMA_REG_TXQ_CTRL);
+ data |= EDMA_TXQ_CTRL_TXQ_EN;
+ writel(data, priv->base + EDMA_REG_TXQ_CTRL);
+}
+
+/*
+ * ipq40xx_edma_init_desc()
+ * Update descriptor ring size,
+ * Update buffer and producer/consumer index
+ */
+static void ipq40xx_edma_init_desc(struct essedma_priv *priv)
+{
+ struct edma_ring *rfd_ring;
+ struct edma_ring *etdr;
+ volatile u32 data = 0;
+ u16 hw_cons_idx = 0;
+
+ /* Set the base address of every TPD ring. */
+ etdr = &priv->tpd_ring;
+
+ /* Update TX descriptor ring base address. */
+ writel((u32)(etdr->dma & 0xffffffff),
+ priv->base + EDMA_REG_TPD_BASE_ADDR_Q(EDMA_TXQ_ID));
+ data = readl(priv->base + EDMA_REG_TPD_IDX_Q(EDMA_TXQ_ID));
+
+ /* Calculate hardware consumer index for Tx. */
+ hw_cons_idx = FIELD_GET(EDMA_TPD_CONS_IDX_MASK, data);
+ etdr->head = hw_cons_idx;
+ etdr->tail = hw_cons_idx;
+ data &= ~EDMA_TPD_PROD_IDX_MASK;
+ data |= hw_cons_idx;
+
+ /* Update producer index for Tx. */
+ writel(data, priv->base + EDMA_REG_TPD_IDX_Q(EDMA_TXQ_ID));
+
+ /* Update SW consumer index register for Tx. */
+ writel(hw_cons_idx,
+ priv->base + EDMA_REG_TX_SW_CONS_IDX_Q(EDMA_TXQ_ID));
+
+ /* Set TPD ring size. */
+ writel((u32)(etdr->count & EDMA_TPD_RING_SIZE_MASK),
+ priv->base + EDMA_REG_TPD_RING_SIZE);
+
+ /* Configure Rx ring. */
+ rfd_ring = &priv->rfd_ring;
+
+ /* Update Receive Free descriptor ring base address. */
+ writel((u32)(rfd_ring->dma & 0xffffffff),
+ priv->base + EDMA_REG_RFD_BASE_ADDR_Q(EDMA_RXQ_ID));
+ data = readl(priv->base + EDMA_REG_RFD_BASE_ADDR_Q(EDMA_RXQ_ID));
+
+ /* Update RFD ring size and RX buffer size. */
+ data = (rfd_ring->count & EDMA_RFD_RING_SIZE_MASK)
+ << EDMA_RFD_RING_SIZE_SHIFT;
+ data |= (EDMA_MAX_PKT_SIZE & EDMA_RX_BUF_SIZE_MASK)
+ << EDMA_RX_BUF_SIZE_SHIFT;
+ writel(data, priv->base + EDMA_REG_RX_DESC0);
+
+ /* Disable TX FIFO low watermark and high watermark */
+ writel(0, priv->base + EDMA_REG_TXF_WATER_MARK);
+
+ /* Load all of base address above */
+ data = readl(priv->base + EDMA_REG_TX_SRAM_PART);
+ data |= 1 << EDMA_LOAD_PTR_SHIFT;
+ writel(data, priv->base + EDMA_REG_TX_SRAM_PART);
+}
+
+static void ipq40xx_edma_init_rfd_ring(struct essedma_priv *priv)
+{
+ struct edma_ring *erdr = &priv->rfd_ring;
+ struct edma_rfd *rfds = erdr->hw_desc;
+ int i;
+
+ for (i = 0; i < erdr->count; i++)
+ rfds[i].buffer_addr = virt_to_phys(net_rx_packets[i]);
+
+ flush_dcache_range(erdr->dma, erdr->dma + erdr->hw_size);
+
+ /* setup producer index */
+ erdr->head = erdr->count - 1;
+ writel(erdr->head, priv->base + EDMA_REG_RFD_IDX_Q(EDMA_RXQ_ID));
+}
+
+static void ipq40xx_edma_configure(struct essedma_priv *priv)
+{
+ u32 tmp;
+ int i;
+
+ /* Set RSS type */
+ writel(IPQ40XX_EDMA_RSS_TYPE_NONE, priv->base + EDMA_REG_RSS_TYPE);
+
+ /* Configure RSS indirection table.
+ * 128 hash will be configured in the following
+ * pattern: hash{0,1,2,3} = {Q0,Q2,Q4,Q6} respectively
+ * and so on
+ */
+ for (i = 0; i < EDMA_NUM_IDT; i++)
+ writel(EDMA_RSS_IDT_VALUE, priv->base + EDMA_REG_RSS_IDT(i));
+
+ /* Set RFD burst number */
+ tmp = (EDMA_RFD_BURST << EDMA_RXQ_RFD_BURST_NUM_SHIFT);
+
+ /* Set RFD prefetch threshold */
+ tmp |= (EDMA_RFD_THR << EDMA_RXQ_RFD_PF_THRESH_SHIFT);
+
+ /* Set RFD in host ring low threshold to generte interrupt */
+ tmp |= (EDMA_RFD_LTHR << EDMA_RXQ_RFD_LOW_THRESH_SHIFT);
+ writel(tmp, priv->base + EDMA_REG_RX_DESC1);
+
+ /* configure reception control data. */
+
+ /* Set Rx FIFO threshold to start to DMA data to host */
+ tmp = EDMA_FIFO_THRESH_128_BYTE;
+
+ /* Set RX remove vlan bit */
+ tmp |= EDMA_RXQ_CTRL_RMV_VLAN;
+ writel(tmp, priv->base + EDMA_REG_RXQ_CTRL);
+
+ /* Configure transmission control data */
+ tmp = (EDMA_TPD_BURST << EDMA_TXQ_NUM_TPD_BURST_SHIFT);
+ tmp |= EDMA_TXQ_CTRL_TPD_BURST_EN;
+ tmp |= (EDMA_TXF_BURST << EDMA_TXQ_TXF_BURST_NUM_SHIFT);
+ writel(tmp, priv->base + EDMA_REG_TXQ_CTRL);
+}
+
+static void ipq40xx_edma_stop_rx_tx(struct essedma_priv *priv)
+{
+ volatile u32 data;
+
+ data = readl(priv->base + EDMA_REG_RXQ_CTRL);
+ data &= ~EDMA_RXQ_CTRL_EN;
+ writel(data, priv->base + EDMA_REG_RXQ_CTRL);
+ data = readl(priv->base + EDMA_REG_TXQ_CTRL);
+ data &= ~EDMA_TXQ_CTRL_TXQ_EN;
+ writel(data, priv->base + EDMA_REG_TXQ_CTRL);
+}
+
+static int ipq40xx_eth_recv(struct udevice *dev, int flags, uchar **packetp)
+{
+ struct essedma_priv *priv = dev_get_priv(dev);
+ struct edma_ring *erdr = &priv->rfd_ring;
+ struct edma_rrd *rrd;
+ u32 hw_tail;
+ u8 *rx_pkt;
+
+ hw_tail = readl(priv->base + EDMA_REG_RFD_IDX_Q(EDMA_RXQ_ID));
+ hw_tail = FIELD_GET(EDMA_RFD_CONS_IDX_MASK, hw_tail);
+
+ if (hw_tail == erdr->tail)
+ return -EAGAIN;
+
+ rx_pkt = net_rx_packets[erdr->tail];
+ invalidate_dcache_range((unsigned long)rx_pkt,
+ (unsigned long)(rx_pkt + EDMA_MAX_PKT_SIZE));
+
+ rrd = (struct edma_rrd *)rx_pkt;
+
+ /* Check if RRD is valid */
+ if (!(rrd->rrd7 & EDMA_RRD7_DESC_VALID))
+ return 0;
+
+ *packetp = rx_pkt + EDMA_RRD_SIZE;
+
+ /* get the packet size */
+ return rrd->rrd6;
+}
+
+static int ipq40xx_eth_free_pkt(struct udevice *dev, uchar *packet,
+ int length)
+{
+ struct essedma_priv *priv = dev_get_priv(dev);
+ struct edma_ring *erdr;
+
+ erdr = &priv->rfd_ring;
+
+ /* Update the producer index */
+ writel(erdr->head, priv->base + EDMA_REG_RFD_IDX_Q(EDMA_RXQ_ID));
+
+ erdr->head++;
+ if (erdr->head == erdr->count)
+ erdr->head = 0;
+
+ /* Update the consumer index */
+ erdr->tail++;
+ if (erdr->tail == erdr->count)
+ erdr->tail = 0;
+
+ writel(erdr->tail,
+ priv->base + EDMA_REG_RX_SW_CONS_IDX_Q(EDMA_RXQ_ID));
+
+ return 0;
+}
+
+static int ipq40xx_eth_start(struct udevice *dev)
+{
+ struct essedma_priv *priv = dev_get_priv(dev);
+
+ ipq40xx_edma_init_rfd_ring(priv);
+
+ ipq40xx_edma_start_rx_tx(priv);
+ ess_switch_enable_lookup(&priv->esw);
+
+ return 0;
+}
+
+/*
+ * One TPD would be enough for sending a packet, however because the
+ * minimal cache line size is larger than the size of a TPD it is not
+ * possible to flush only one at once. To overcome this limitation
+ * multiple TPDs are used for sending a single packet.
+ */
+#define EDMA_TPDS_PER_PACKET 4
+#define EDMA_TPD_MIN_BYTES 4
+#define EDMA_MIN_PKT_SIZE (EDMA_TPDS_PER_PACKET * EDMA_TPD_MIN_BYTES)
+
+#define EDMA_TX_COMPLETE_TIMEOUT 1000000
+
+static int ipq40xx_eth_send(struct udevice *dev, void *packet, int length)
+{
+ struct essedma_priv *priv = dev_get_priv(dev);
+ struct edma_tpd *first_tpd;
+ struct edma_tpd *tpds;
+ int i;
+
+ if (length < EDMA_MIN_PKT_SIZE)
+ return 0;
+
+ flush_dcache_range((unsigned long)(packet),
+ (unsigned long)(packet) +
+ roundup(length, ARCH_DMA_MINALIGN));
+
+ tpds = priv->tpd_ring.hw_desc;
+ for (i = 0; i < EDMA_TPDS_PER_PACKET; i++) {
+ struct edma_tpd *tpd;
+ void *frag;
+
+ frag = packet + (i * EDMA_TPD_MIN_BYTES);
+
+ /* get the next TPD */
+ tpd = &tpds[priv->tpd_ring.head];
+ if (i == 0)
+ first_tpd = tpd;
+
+ /* update the software index */
+ priv->tpd_ring.head++;
+ if (priv->tpd_ring.head == priv->tpd_ring.count)
+ priv->tpd_ring.head = 0;
+
+ tpd->svlan_tag = 0;
+ tpd->addr = virt_to_phys(frag);
+ tpd->word3 = EDMA_PORT_ENABLE_ALL << EDMA_TPD_PORT_BITMAP_SHIFT;
+
+ if (i < (EDMA_TPDS_PER_PACKET - 1)) {
+ tpd->len = EDMA_TPD_MIN_BYTES;
+ tpd->word1 = 0;
+ } else {
+ tpd->len = length;
+ tpd->word1 = 1 << EDMA_TPD_EOP_SHIFT;
+ }
+
+ length -= EDMA_TPD_MIN_BYTES;
+ }
+
+ /* make sure that memory writing completes */
+ wmb();
+
+ flush_dcache_range((unsigned long)first_tpd,
+ (unsigned long)first_tpd +
+ EDMA_TPDS_PER_PACKET * sizeof(struct edma_tpd));
+
+ /* update the TX producer index */
+ writel(priv->tpd_ring.head,
+ priv->base + EDMA_REG_TPD_IDX_Q(EDMA_TXQ_ID));
+
+ /* Wait for TX DMA completion */
+ for (i = 0; i < EDMA_TX_COMPLETE_TIMEOUT; i++) {
+ u32 r, prod, cons;
+
+ r = readl(priv->base + EDMA_REG_TPD_IDX_Q(EDMA_TXQ_ID));
+ prod = FIELD_GET(EDMA_TPD_PROD_IDX_MASK, r);
+ cons = FIELD_GET(EDMA_TPD_CONS_IDX_MASK, r);
+
+ if (cons == prod)
+ break;
+
+ udelay(1);
+ }
+
+ if (i == EDMA_TX_COMPLETE_TIMEOUT)
+ printf("TX timeout: packet not sent!\n");
+
+ /* update the software TX consumer index register */
+ writel(priv->tpd_ring.head,
+ priv->base + EDMA_REG_TX_SW_CONS_IDX_Q(EDMA_TXQ_ID));
+
+ return 0;
+}
+
+static void ipq40xx_eth_stop(struct udevice *dev)
+{
+ struct essedma_priv *priv = dev_get_priv(dev);
+
+ ess_switch_disable_lookup(&priv->esw);
+ ipq40xx_edma_stop_rx_tx(priv);
+}
+
+static void ipq40xx_edma_free_ring(struct edma_ring *ring)
+{
+ free(ring->hw_desc);
+}
+
+/*
+ * Free Tx and Rx rings
+ */
+static void ipq40xx_edma_free_rings(struct essedma_priv *priv)
+{
+ ipq40xx_edma_free_ring(&priv->tpd_ring);
+ ipq40xx_edma_free_ring(&priv->rfd_ring);
+}
+
+/*
+ * ipq40xx_edma_alloc_ring()
+ * allocate edma ring descriptor.
+ */
+static int ipq40xx_edma_alloc_ring(struct edma_ring *erd,
+ unsigned int desc_size)
+{
+ erd->head = 0;
+ erd->tail = 0;
+
+ /* Alloc HW descriptors */
+ erd->hw_size = roundup(desc_size * erd->count,
+ ARCH_DMA_MINALIGN);
+
+ erd->hw_desc = memalign(CONFIG_SYS_CACHELINE_SIZE, erd->hw_size);
+ if (!erd->hw_desc)
+ return -ENOMEM;
+
+ memset(erd->hw_desc, 0, erd->hw_size);
+ erd->dma = virt_to_phys(erd->hw_desc);
+
+ return 0;
+
+}
+
+/*
+ * ipq40xx_allocate_tx_rx_rings()
+ */
+static int ipq40xx_edma_alloc_tx_rx_rings(struct essedma_priv *priv)
+{
+ int ret;
+
+ ret = ipq40xx_edma_alloc_ring(&priv->tpd_ring,
+ sizeof(struct edma_tpd));
+ if (ret)
+ return ret;
+
+ ret = ipq40xx_edma_alloc_ring(&priv->rfd_ring,
+ sizeof(struct edma_rfd));
+ if (ret)
+ goto err_free_tpd;
+
+ return 0;
+
+err_free_tpd:
+ ipq40xx_edma_free_ring(&priv->tpd_ring);
+ return ret;
+}
+
+static int ipq40xx_eth_write_hwaddr(struct udevice *dev)
+{
+ struct eth_pdata *pdata = dev_get_plat(dev);
+ struct essedma_priv *priv = dev_get_priv(dev);
+ unsigned char *mac = pdata->enetaddr;
+ u32 mac_lo, mac_hi;
+
+ mac_hi = ((u32)mac[0]) << 8 | (u32)mac[1];
+ mac_lo = ((u32)mac[2]) << 24 | ((u32)mac[3]) << 16 |
+ ((u32)mac[4]) << 8 | (u32)mac[5];
+
+ writel(mac_lo, priv->base + REG_MAC_CTRL0);
+ writel(mac_hi, priv->base + REG_MAC_CTRL1);
+
+ return 0;
+}
+
+static int edma_init(struct udevice *dev)
+{
+ struct essedma_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ priv->tpd_ring.count = IPQ40XX_EDMA_TX_RING_SIZE;
+ priv->rfd_ring.count = PKTBUFSRX;
+
+ ret = ipq40xx_edma_alloc_tx_rx_rings(priv);
+ if (ret)
+ return -ENOMEM;
+
+ ipq40xx_edma_stop_rx_tx(priv);
+
+ /* Configure EDMA. */
+ ipq40xx_edma_configure(priv);
+
+ /* Configure descriptor Ring */
+ ipq40xx_edma_init_desc(priv);
+
+ ess_switch_disable_lookup(&priv->esw);
+
+ return 0;
+}
+
+static int essedma_probe(struct udevice *dev)
+{
+ struct essedma_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ priv->dev = dev;
+
+ priv->base = dev_read_addr_name(dev, "edma");
+ if (priv->base == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ priv->psgmii_base = dev_read_addr_name(dev, "psgmii_phy");
+ if (priv->psgmii_base == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ priv->esw.base = dev_read_addr_name(dev, "base");
+ if (priv->esw.base == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ ret = clk_get_by_name(dev, "ess", &priv->ess_clk);
+ if (ret)
+ return ret;
+
+ ret = reset_get_by_name(dev, "ess", &priv->ess_rst);
+ if (ret)
+ return ret;
+
+ ret = clk_enable(&priv->ess_clk);
+ if (ret)
+ return ret;
+
+ ess_reset(dev);
+
+ ret = uclass_get_device_by_driver(UCLASS_MDIO,
+ DM_DRIVER_GET(ipq4019_mdio),
+ &priv->mdio_dev);
+ if (ret) {
+ dev_dbg(dev, "Cant find IPQ4019 MDIO: %d\n", ret);
+ goto err;
+ }
+
+ /* OF switch and PHY parsing and configuration */
+ ret = essedma_of_switch(dev);
+ if (ret)
+ goto err;
+
+ switch (priv->esw.port_wrapper_mode) {
+ case PHY_INTERFACE_MODE_PSGMII:
+ writel(PSGMIIPHY_PLL_VCO_VAL,
+ priv->psgmii_base + PSGMIIPHY_PLL_VCO_RELATED_CTRL);
+ writel(PSGMIIPHY_VCO_VAL, priv->psgmii_base +
+ PSGMIIPHY_VCO_CALIBRATION_CTRL_REGISTER_1);
+ /* wait for 10ms */
+ mdelay(10);
+ writel(PSGMIIPHY_VCO_RST_VAL, priv->psgmii_base +
+ PSGMIIPHY_VCO_CALIBRATION_CTRL_REGISTER_1);
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ writel(0x1, RGMII_TCSR_ESS_CFG);
+ writel(0x400, priv->esw.base + ESS_RGMII_CTRL);
+ break;
+ default:
+ printf("Unknown MII interface\n");
+ }
+
+ if (priv->esw.port_wrapper_mode == PHY_INTERFACE_MODE_PSGMII)
+ psgmii_self_test(dev);
+
+ ess_switch_init(&priv->esw);
+
+ ret = edma_init(dev);
+ if (ret)
+ goto err;
+
+ return 0;
+
+err:
+ reset_assert(&priv->ess_rst);
+ clk_disable(&priv->ess_clk);
+ return ret;
+}
+
+static int essedma_remove(struct udevice *dev)
+{
+ struct essedma_priv *priv = dev_get_priv(dev);
+
+ ipq40xx_edma_free_rings(priv);
+
+ clk_disable(&priv->ess_clk);
+ reset_assert(&priv->ess_rst);
+
+ return 0;
+}
+
+static const struct eth_ops essedma_eth_ops = {
+ .start = ipq40xx_eth_start,
+ .send = ipq40xx_eth_send,
+ .recv = ipq40xx_eth_recv,
+ .free_pkt = ipq40xx_eth_free_pkt,
+ .stop = ipq40xx_eth_stop,
+ .write_hwaddr = ipq40xx_eth_write_hwaddr,
+};
+
+static const struct udevice_id essedma_ids[] = {
+ { .compatible = "qcom,ipq4019-ess", },
+ { }
+};
+
+U_BOOT_DRIVER(essedma) = {
+ .name = "essedma",
+ .id = UCLASS_ETH,
+ .of_match = essedma_ids,
+ .probe = essedma_probe,
+ .remove = essedma_remove,
+ .priv_auto = sizeof(struct essedma_priv),
+ .plat_auto = sizeof(struct eth_pdata),
+ .ops = &essedma_eth_ops,
+ .flags = DM_FLAG_ALLOC_PRIV_DMA,
+};
diff --git a/drivers/net/essedma.h b/drivers/net/essedma.h
new file mode 100644
index 0000000..067cb44
--- /dev/null
+++ b/drivers/net/essedma.h
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2020 Sartura Ltd.
+ *
+ * Author: Robert Marko <robert.marko@sartura.hr>
+ *
+ * Copyright (c) 2021 Toco Technologies FZE <contact@toco.ae>
+ * Copyright (c) 2021 Gabor Juhos <j4g8y7@gmail.com>
+ *
+ * Qualcomm ESS EDMA ethernet driver
+ */
+
+#ifndef _ESSEDMA_ETH_H
+#define _ESSEDMA_ETH_H
+
+#define ESS_PORTS_NUM 6
+
+#define ESS_RGMII_CTRL 0x4
+
+#define ESS_GLOBAL_FW_CTRL1 0x624
+
+#define ESS_PORT0_STATUS 0x7c
+#define ESS_PORT_SPEED_MASK GENMASK(1, 0)
+#define ESS_PORT_SPEED_1000 3
+#define ESS_PORT_SPEED_100 2
+#define ESS_PORT_SPEED_10 1
+#define ESS_PORT_TXMAC_EN BIT(2)
+#define ESS_PORT_RXMAC_EN BIT(3)
+#define ESS_PORT_TX_FLOW_EN BIT(4)
+#define ESS_PORT_RX_FLOW_EN BIT(5)
+#define ESS_PORT_DUPLEX_MODE BIT(6)
+
+#define ESS_PORT_LOOKUP_CTRL(_p) (0x660 + (_p) * 12)
+#define ESS_PORT_LOOP_BACK_EN BIT(21)
+#define ESS_PORT_VID_MEM_MASK GENMASK(6, 0)
+
+#define ESS_PORT_HOL_CTRL0(_p) (0x970 + (_p) * 8)
+#define EG_PORT_QUEUE_NUM_MASK GENMASK(29, 24)
+
+/* Ports 0 and 5 have queues 0-5
+ * Ports 1 to 4 have queues 0-3
+ */
+#define EG_PRI5_QUEUE_NUM_MASK GENMASK(23, 20)
+#define EG_PRI4_QUEUE_NUM_MASK GENMASK(19, 16)
+#define EG_PRI3_QUEUE_NUM_MASK GENMASK(15, 12)
+#define EG_PRI2_QUEUE_NUM_MASK GENMASK(11, 8)
+#define EG_PRI1_QUEUE_NUM_MASK GENMASK(7, 4)
+#define EG_PRI0_QUEUE_NUM_MASK GENMASK(3, 0)
+
+#define ESS_PORT_HOL_CTRL1(_p) (0x974 + (_p) * 8)
+#define ESS_ING_BUF_NUM_0_MASK GENMASK(3, 0)
+
+/* QCA807x PHY registers */
+#define QCA807X_CHIP_CONFIGURATION 0x1f
+#define QCA807X_MEDIA_PAGE_SELECT BIT(15)
+
+#define QCA807X_POWER_DOWN BIT(11)
+
+#define QCA807X_FUNCTION_CONTROL 0x10
+#define QCA807X_MDI_CROSSOVER_MODE_MASK GENMASK(6, 5)
+#define QCA807X_MDI_CROSSOVER_MODE_MANUAL_MDI 0
+#define QCA807X_POLARITY_REVERSAL BIT(1)
+
+#define QCA807X_PHY_SPECIFIC 0x11
+#define QCA807X_PHY_SPECIFIC_LINK BIT(10)
+
+#define QCA807X_MMD7_CRC_PACKET_COUNTER 0x8029
+#define QCA807X_MMD7_PACKET_COUNTER_SELFCLR BIT(1)
+#define QCA807X_MMD7_CRC_PACKET_COUNTER_EN BIT(0)
+#define QCA807X_MMD7_VALID_EGRESS_COUNTER_2 0x802e
+
+/* PSGMII specific registers */
+#define PSGMIIPHY_VCO_CALIBRATION_CTRL_REGISTER_1 0x9c
+#define PSGMIIPHY_VCO_VAL 0x4ada
+#define PSGMIIPHY_VCO_RST_VAL 0xada
+#define PSGMIIPHY_VCO_CALIBRATION_CTRL_REGISTER_2 0xa0
+
+#define PSGMIIPHY_PLL_VCO_RELATED_CTRL 0x78c
+#define PSGMIIPHY_PLL_VCO_VAL 0x2803
+
+#define RGMII_TCSR_ESS_CFG 0x01953000
+
+/* EDMA registers */
+#define IPQ40XX_EDMA_TX_RING_SIZE 8
+#define IPQ40XX_EDMA_RSS_TYPE_NONE 0x1
+
+#define EDMA_RSS_TYPE 0
+#define EDMA_TPD_EOP_SHIFT 31
+
+/* tpd word 3 bit 18-28 */
+#define EDMA_TPD_PORT_BITMAP_SHIFT 18
+
+/* Enable Tx for all ports */
+#define EDMA_PORT_ENABLE_ALL 0x3E
+
+/* Edma receive consumer index */
+/* x = queue id */
+#define EDMA_REG_RX_SW_CONS_IDX_Q(x) (0x220 + ((x) << 2))
+/* Edma transmit consumer index */
+#define EDMA_REG_TX_SW_CONS_IDX_Q(x) (0x240 + ((x) << 2))
+/* TPD Index Register */
+#define EDMA_REG_TPD_IDX_Q(x) (0x460 + ((x) << 2))
+/* Tx Descriptor Control Register */
+#define EDMA_REG_TPD_RING_SIZE 0x41C
+#define EDMA_TPD_RING_SIZE_MASK 0xFFFF
+
+/* Transmit descriptor base address */
+ /* x = queue id */
+#define EDMA_REG_TPD_BASE_ADDR_Q(x) (0x420 + ((x) << 2))
+#define EDMA_TPD_PROD_IDX_MASK GENMASK(15, 0)
+#define EDMA_TPD_CONS_IDX_MASK GENMASK(31, 16)
+
+#define EDMA_REG_TX_SRAM_PART 0x400
+#define EDMA_LOAD_PTR_SHIFT 16
+
+/* TXQ Control Register */
+#define EDMA_REG_TXQ_CTRL 0x404
+#define EDMA_TXQ_CTRL_TXQ_EN 0x20
+#define EDMA_TXQ_CTRL_TPD_BURST_EN 0x100
+#define EDMA_TXQ_NUM_TPD_BURST_SHIFT 0
+#define EDMA_TXQ_TXF_BURST_NUM_SHIFT 16
+#define EDMA_TXF_BURST 0x100
+#define EDMA_TPD_BURST 5
+
+#define EDMA_REG_TXF_WATER_MARK 0x408
+
+/* RSS Indirection Register */
+/* x = No. of indirection table */
+#define EDMA_REG_RSS_IDT(x) (0x840 + ((x) << 2))
+#define EDMA_NUM_IDT 16
+#define EDMA_RSS_IDT_VALUE 0x64206420
+
+/* RSS Hash Function Type Register */
+#define EDMA_REG_RSS_TYPE 0x894
+
+/* x = queue id */
+#define EDMA_REG_RFD_BASE_ADDR_Q(x) (0x950 + ((x) << 2))
+/* RFD Index Register */
+#define EDMA_RFD_BURST 8
+#define EDMA_RFD_THR 16
+#define EDMA_RFD_LTHR 0
+#define EDMA_REG_RFD_IDX_Q(x) (0x9B0 + ((x) << 2))
+
+#define EDMA_RFD_CONS_IDX_MASK GENMASK(27, 16)
+
+/* Rx Descriptor Control Register */
+#define EDMA_REG_RX_DESC0 0xA10
+#define EDMA_RFD_RING_SIZE_MASK 0xFFF
+#define EDMA_RX_BUF_SIZE_MASK 0xFFFF
+#define EDMA_RFD_RING_SIZE_SHIFT 0
+#define EDMA_RX_BUF_SIZE_SHIFT 16
+
+#define EDMA_REG_RX_DESC1 0xA14
+#define EDMA_RXQ_RFD_BURST_NUM_SHIFT 0
+#define EDMA_RXQ_RFD_PF_THRESH_SHIFT 8
+#define EDMA_RXQ_RFD_LOW_THRESH_SHIFT 16
+
+/* RXQ Control Register */
+#define EDMA_REG_RXQ_CTRL 0xA18
+#define EDMA_FIFO_THRESH_128_BYTE 0x0
+#define EDMA_RXQ_CTRL_RMV_VLAN 0x00000002
+#define EDMA_RXQ_CTRL_EN 0x0000FF00
+
+/* MAC Control Register */
+#define REG_MAC_CTRL0 0xC20
+#define REG_MAC_CTRL1 0xC24
+
+/* Transmit Packet Descriptor */
+struct edma_tpd {
+ u16 len; /* full packet including CRC */
+ u16 svlan_tag; /* vlan tag */
+ u32 word1; /* byte 4-7 */
+ u32 addr; /* address of buffer */
+ u32 word3; /* byte 12 */
+};
+
+/* Receive Return Descriptor */
+struct edma_rrd {
+ u16 rrd0;
+ u16 rrd1;
+ u16 rrd2;
+ u16 rrd3;
+ u16 rrd4;
+ u16 rrd5;
+ u16 rrd6;
+ u16 rrd7;
+} __packed;
+
+#define EDMA_RRD_SIZE sizeof(struct edma_rrd)
+
+#define EDMA_RRD7_DESC_VALID BIT(15)
+
+/* Receive Free Descriptor */
+struct edma_rfd {
+ u32 buffer_addr; /* buffer address */
+};
+
+#endif /* _ESSEDMA_ETH_H */
diff --git a/drivers/power/regulator/Kconfig b/drivers/power/regulator/Kconfig
index 102ec7b..bc061c2 100644
--- a/drivers/power/regulator/Kconfig
+++ b/drivers/power/regulator/Kconfig
@@ -216,6 +216,14 @@
features for gpio regulators. The driver implements get/set for
voltage value.
+config DM_REGULATOR_QCOM_RPMH
+ bool "Enable driver model for Qualcomm RPMh regulator"
+ depends on DM_REGULATOR && QCOM_RPMH
+ ---help---
+ Enable support for the Qualcomm RPMh regulator. The driver
+ implements get/set api for a limited set of regulators used
+ by u-boot.
+
config SPL_DM_REGULATOR_GPIO
bool "Enable Driver Model for GPIO REGULATOR in SPL"
depends on DM_REGULATOR_GPIO && SPL_GPIO
diff --git a/drivers/power/regulator/Makefile b/drivers/power/regulator/Makefile
index f79932d..56a5276 100644
--- a/drivers/power/regulator/Makefile
+++ b/drivers/power/regulator/Makefile
@@ -21,6 +21,7 @@
obj-$(CONFIG_$(SPL_)DM_REGULATOR_COMMON) += regulator_common.o
obj-$(CONFIG_$(SPL_)DM_REGULATOR_FIXED) += fixed.o
obj-$(CONFIG_$(SPL_)DM_REGULATOR_GPIO) += gpio-regulator.o
+obj-$(CONFIG_DM_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o
obj-$(CONFIG_$(SPL_TPL_)REGULATOR_RK8XX) += rk8xx.o
obj-$(CONFIG_DM_REGULATOR_S2MPS11) += s2mps11_regulator.o
obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
diff --git a/drivers/power/regulator/qcom-rpmh-regulator.c b/drivers/power/regulator/qcom-rpmh-regulator.c
new file mode 100644
index 0000000..06fd3f3
--- /dev/null
+++ b/drivers/power/regulator/qcom-rpmh-regulator.c
@@ -0,0 +1,544 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
+// Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/err.h>
+#include <dm/device_compat.h>
+#include <dm/device.h>
+#include <dm/devres.h>
+#include <dm/lists.h>
+#include <power/regulator.h>
+#include <log.h>
+
+#include <soc/qcom/cmd-db.h>
+#include <soc/qcom/rpmh.h>
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+/**
+ * enum rpmh_regulator_type - supported RPMh accelerator types
+ * @VRM: RPMh VRM accelerator which supports voting on enable, voltage,
+ * and mode of LDO, SMPS, and BOB type PMIC regulators.
+ * @XOB: RPMh XOB accelerator which supports voting on the enable state
+ * of PMIC regulators.
+ */
+enum rpmh_regulator_type {
+ VRM,
+ XOB,
+};
+
+enum rpmh_regulator_mode {
+ REGULATOR_MODE_RETENTION,
+ REGULATOR_MODE_LPM,
+ REGULATOR_MODE_AUTO,
+ REGULATOR_MODE_HPM,
+};
+
+#define RPMH_REGULATOR_REG_VRM_VOLTAGE 0x0
+#define RPMH_REGULATOR_REG_ENABLE 0x4
+#define RPMH_REGULATOR_REG_VRM_MODE 0x8
+
+#define PMIC4_LDO_MODE_RETENTION 4
+#define PMIC4_LDO_MODE_LPM 5
+#define PMIC4_LDO_MODE_HPM 7
+
+#define PMIC4_SMPS_MODE_RETENTION 4
+#define PMIC4_SMPS_MODE_PFM 5
+#define PMIC4_SMPS_MODE_AUTO 6
+#define PMIC4_SMPS_MODE_PWM 7
+
+#define PMIC4_BOB_MODE_PASS 0
+#define PMIC4_BOB_MODE_PFM 1
+#define PMIC4_BOB_MODE_AUTO 2
+#define PMIC4_BOB_MODE_PWM 3
+
+#define PMIC5_LDO_MODE_RETENTION 3
+#define PMIC5_LDO_MODE_LPM 4
+#define PMIC5_LDO_MODE_HPM 7
+
+#define PMIC5_SMPS_MODE_RETENTION 3
+#define PMIC5_SMPS_MODE_PFM 4
+#define PMIC5_SMPS_MODE_AUTO 6
+#define PMIC5_SMPS_MODE_PWM 7
+
+#define PMIC5_BOB_MODE_PASS 2
+#define PMIC5_BOB_MODE_PFM 4
+#define PMIC5_BOB_MODE_AUTO 6
+#define PMIC5_BOB_MODE_PWM 7
+
+
+/**
+ * struct linear_range - table of selector - value pairs
+ *
+ * Define a lookup-table for range of values. Intended to help when looking
+ * for a register value matching certaing physical measure (like voltage).
+ * Usable when increment of one in register always results a constant increment
+ * of the physical measure (like voltage).
+ *
+ * @min: Lowest value in range
+ * @min_sel: Lowest selector for range
+ * @max_sel: Highest selector for range
+ * @step: Value step size
+ */
+struct linear_range {
+ unsigned int min;
+ unsigned int min_sel;
+ unsigned int max_sel;
+ unsigned int step;
+};
+
+/* Initialize struct linear_range for regulators */
+#define REGULATOR_LINEAR_RANGE(_min_uV, _min_sel, _max_sel, _step_uV) \
+{ \
+ .min = _min_uV, \
+ .min_sel = _min_sel, \
+ .max_sel = _max_sel, \
+ .step = _step_uV, \
+}
+
+/**
+ * struct rpmh_vreg_hw_data - RPMh regulator hardware configurations
+ * @regulator_type: RPMh accelerator type used to manage this
+ * regulator
+ * @ops: Pointer to regulator ops callback structure
+ * @voltage_range: The single range of voltages supported by this
+ * PMIC regulator type
+ * @n_voltages: The number of unique voltage set points defined
+ * by voltage_range
+ * @hpm_min_load_uA: Minimum load current in microamps that requires
+ * high power mode (HPM) operation. This is used
+ * for LDO hardware type regulators only.
+ * @pmic_mode_map: Array indexed by regulator framework mode
+ * containing PMIC hardware modes. Must be large
+ * enough to index all framework modes supported
+ * by this regulator hardware type.
+ * @of_map_mode: Maps an RPMH_REGULATOR_MODE_* mode value defined
+ * in device tree to a regulator framework mode
+ */
+struct rpmh_vreg_hw_data {
+ enum rpmh_regulator_type regulator_type;
+ const struct dm_regulator_ops *ops;
+ struct linear_range voltage_range;
+ int n_voltages;
+ int hpm_min_load_uA;
+ struct dm_regulator_mode *pmic_mode_map;
+ int n_modes;
+ unsigned int (*of_map_mode)(unsigned int mode);
+};
+
+/**
+ * struct rpmh_vreg - individual RPMh regulator data structure encapsulating a
+ * single regulator device
+ * @dev: Device pointer for the top-level PMIC RPMh
+ * regulator parent device. This is used as a
+ * handle in RPMh write requests.
+ * @addr: Base address of the regulator resource within
+ * an RPMh accelerator
+ * @rdesc: Regulator descriptor
+ * @hw_data: PMIC regulator configuration data for this RPMh
+ * regulator
+ * @always_wait_for_ack: Boolean flag indicating if a request must always
+ * wait for an ACK from RPMh before continuing even
+ * if it corresponds to a strictly lower power
+ * state (e.g. enabled --> disabled).
+ * @enabled: Flag indicating if the regulator is enabled or
+ * not
+ * @bypassed: Boolean indicating if the regulator is in
+ * bypass (pass-through) mode or not. This is
+ * only used by BOB rpmh-regulator resources.
+ * @uv: Selector used for get_voltage_sel() and
+ * set_value() callbacks
+ * @mode: RPMh VRM regulator current framework mode
+ */
+struct rpmh_vreg {
+ struct udevice *dev;
+ u32 addr;
+ const struct rpmh_vreg_hw_data *hw_data;
+ bool always_wait_for_ack;
+
+ int enabled;
+ bool bypassed;
+ int uv;
+ int mode;
+};
+
+/**
+ * struct rpmh_vreg_init_data - initialization data for an RPMh regulator
+ * @name: Name for the regulator which also corresponds
+ * to the device tree subnode name of the regulator
+ * @resource_name: RPMh regulator resource name format string.
+ * This must include exactly one field: '%s' which
+ * is filled at run-time with the PMIC ID provided
+ * by device tree property qcom,pmic-id. Example:
+ * "ldo%s1" for RPMh resource "ldoa1".
+ * @supply_name: Parent supply regulator name
+ * @hw_data: Configuration data for this PMIC regulator type
+ */
+struct rpmh_vreg_init_data {
+ const char *name;
+ const char *resource_name;
+ const char *supply_name;
+ const struct rpmh_vreg_hw_data *hw_data;
+};
+
+/**
+ * rpmh_regulator_send_request() - send the request to RPMh
+ * @vreg: Pointer to the RPMh regulator
+ * @cmd: Pointer to the RPMh command to send
+ * @wait_for_ack: Boolean indicating if execution must wait until the
+ * request has been acknowledged as complete
+ *
+ * Return: 0 on success, errno on failure
+ */
+static int rpmh_regulator_send_request(struct rpmh_vreg *vreg,
+ const struct tcs_cmd *cmd, bool wait_for_ack)
+{
+ int ret;
+
+ if (wait_for_ack || vreg->always_wait_for_ack)
+ ret = rpmh_write(vreg->dev->parent, RPMH_ACTIVE_ONLY_STATE, cmd, 1);
+ else
+ ret = rpmh_write_async(vreg->dev->parent, RPMH_ACTIVE_ONLY_STATE, cmd, 1);
+
+ return ret;
+}
+
+static int _rpmh_regulator_vrm_set_value(struct udevice *rdev,
+ int uv, bool wait_for_ack)
+{
+ struct rpmh_vreg *vreg = dev_get_priv(rdev);
+ struct tcs_cmd cmd = {
+ .addr = vreg->addr + RPMH_REGULATOR_REG_VRM_VOLTAGE,
+ };
+ int ret;
+ unsigned int selector;
+
+ selector = (uv - vreg->hw_data->voltage_range.min) / vreg->hw_data->voltage_range.step;
+ cmd.data = DIV_ROUND_UP(vreg->hw_data->voltage_range.min +
+ selector * vreg->hw_data->voltage_range.step, 1000);
+
+ ret = rpmh_regulator_send_request(vreg, &cmd, wait_for_ack);
+ if (!ret)
+ vreg->uv = cmd.data * 1000;
+
+ return ret;
+}
+
+static int rpmh_regulator_vrm_set_value(struct udevice *rdev,
+ int uv)
+{
+ struct rpmh_vreg *vreg = dev_get_priv(rdev);
+
+ debug("%s: set_value %d (current %d)\n", rdev->name, uv, vreg->uv);
+
+ if (vreg->enabled == -EINVAL) {
+ /*
+ * Cache the voltage and send it later when the regulator is
+ * enabled or disabled.
+ */
+ vreg->uv = uv;
+ return 0;
+ }
+
+ return _rpmh_regulator_vrm_set_value(rdev, uv,
+ uv > vreg->uv);
+}
+
+static int rpmh_regulator_vrm_get_value(struct udevice *rdev)
+{
+ struct rpmh_vreg *vreg = dev_get_priv(rdev);
+
+ debug("%s: get_value %d\n", rdev->name, vreg->uv);
+
+ return vreg->uv;
+}
+
+static int rpmh_regulator_is_enabled(struct udevice *rdev)
+{
+ struct rpmh_vreg *vreg = dev_get_priv(rdev);
+
+ debug("%s: is_enabled %d\n", rdev->name, vreg->enabled);
+
+ return vreg->enabled > 0;
+}
+
+static int rpmh_regulator_set_enable_state(struct udevice *rdev,
+ bool enable)
+{
+ struct rpmh_vreg *vreg = dev_get_priv(rdev);
+ struct tcs_cmd cmd = {
+ .addr = vreg->addr + RPMH_REGULATOR_REG_ENABLE,
+ .data = enable,
+ };
+ int ret;
+
+ debug("%s: set_enable %d (current %d)\n", rdev->name, enable,
+ vreg->enabled);
+
+ if (vreg->enabled == -EINVAL &&
+ vreg->uv != -ENOTRECOVERABLE) {
+ ret = _rpmh_regulator_vrm_set_value(rdev,
+ vreg->uv, true);
+ if (ret < 0)
+ return ret;
+ }
+
+ ret = rpmh_regulator_send_request(vreg, &cmd, enable);
+ if (!ret)
+ vreg->enabled = enable;
+
+ return ret;
+}
+
+static int rpmh_regulator_vrm_set_mode_bypass(struct rpmh_vreg *vreg,
+ unsigned int mode, bool bypassed)
+{
+ struct tcs_cmd cmd = {
+ .addr = vreg->addr + RPMH_REGULATOR_REG_VRM_MODE,
+ };
+ struct dm_regulator_mode *pmic_mode;
+ int i;
+
+ if (mode > REGULATOR_MODE_HPM)
+ return -EINVAL;
+
+ for (i = 0; i < vreg->hw_data->n_modes; i++) {
+ pmic_mode = &vreg->hw_data->pmic_mode_map[i];
+ if (pmic_mode->id == mode)
+ break;
+ }
+ if (pmic_mode->id != mode) {
+ printf("Invalid mode %d\n", mode);
+ return -EINVAL;
+ }
+
+ if (bypassed)
+ cmd.data = PMIC4_BOB_MODE_PASS;
+ else
+ cmd.data = pmic_mode->id;
+
+ return rpmh_regulator_send_request(vreg, &cmd, true);
+}
+
+static int rpmh_regulator_vrm_set_mode(struct udevice *rdev,
+ int mode)
+{
+ struct rpmh_vreg *vreg = dev_get_priv(rdev);
+ int ret;
+
+ debug("%s: set_mode %d (current %d)\n", rdev->name, mode, vreg->mode);
+
+ if (mode == vreg->mode)
+ return 0;
+
+ ret = rpmh_regulator_vrm_set_mode_bypass(vreg, mode, vreg->bypassed);
+ if (!ret)
+ vreg->mode = mode;
+
+ return ret;
+}
+
+static int rpmh_regulator_vrm_get_mode(struct udevice *rdev)
+{
+ struct rpmh_vreg *vreg = dev_get_priv(rdev);
+
+ debug("%s: get_mode %d\n", rdev->name, vreg->mode);
+
+ return vreg->mode;
+}
+static const struct dm_regulator_ops rpmh_regulator_vrm_drms_ops = {
+ .get_value = rpmh_regulator_vrm_get_value,
+ .set_value = rpmh_regulator_vrm_set_value,
+ .set_enable = rpmh_regulator_set_enable_state,
+ .get_enable = rpmh_regulator_is_enabled,
+ .set_mode = rpmh_regulator_vrm_set_mode,
+ .get_mode = rpmh_regulator_vrm_get_mode,
+};
+
+static struct dm_regulator_mode pmic_mode_map_pmic5_ldo[] = {
+ {
+ .id = REGULATOR_MODE_RETENTION,
+ .register_value = PMIC5_LDO_MODE_RETENTION,
+ .name = "PMIC5_LDO_MODE_RETENTION"
+ }, {
+ .id = REGULATOR_MODE_LPM,
+ .register_value = PMIC5_LDO_MODE_LPM,
+ .name = "PMIC5_LDO_MODE_LPM"
+ }, {
+ .id = REGULATOR_MODE_HPM,
+ .register_value = PMIC5_LDO_MODE_HPM,
+ .name = "PMIC5_LDO_MODE_HPM"
+ },
+};
+
+static const struct rpmh_vreg_hw_data pmic5_pldo = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_drms_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(1504000, 0, 255, 8000),
+ .n_voltages = 256,
+ .hpm_min_load_uA = 10000,
+ .pmic_mode_map = pmic_mode_map_pmic5_ldo,
+ .n_modes = ARRAY_SIZE(pmic_mode_map_pmic5_ldo),
+};
+
+static const struct rpmh_vreg_hw_data pmic5_pldo_lv = {
+ .regulator_type = VRM,
+ .ops = &rpmh_regulator_vrm_drms_ops,
+ .voltage_range = REGULATOR_LINEAR_RANGE(1504000, 0, 62, 8000),
+ .n_voltages = 63,
+ .hpm_min_load_uA = 10000,
+ .pmic_mode_map = pmic_mode_map_pmic5_ldo,
+ .n_modes = ARRAY_SIZE(pmic_mode_map_pmic5_ldo),
+};
+
+#define RPMH_VREG(_name, _resource_name, _hw_data, _supply_name) \
+{ \
+ .name = _name, \
+ .resource_name = _resource_name, \
+ .hw_data = _hw_data, \
+ .supply_name = _supply_name, \
+}
+
+static const struct rpmh_vreg_init_data pm8150_vreg_data[] = {
+ RPMH_VREG("ldo13", "ldo%s13", &pmic5_pldo, "vdd-l13-l16-l17"),
+ {}
+};
+
+static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
+ RPMH_VREG("ldo1", "ldo%s1", &pmic5_pldo_lv, "vdd-l1-l8"),
+ RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo, "vdd-l7-l11"),
+ {}
+};
+
+/* probe an individual regulator */
+static int rpmh_regulator_probe(struct udevice *dev)
+{
+ const struct rpmh_vreg_init_data *init_data;
+ struct rpmh_vreg *priv;
+ struct dm_regulator_uclass_plat *plat_data;
+
+ init_data = (const struct rpmh_vreg_init_data *)dev_get_driver_data(dev);
+ priv = dev_get_priv(dev);
+ plat_data = dev_get_uclass_plat(dev);
+
+ priv->dev = dev;
+ priv->addr = cmd_db_read_addr(dev->name);
+ if (!priv->addr) {
+ dev_err(dev, "Failed to read RPMh address for %s\n", dev->name);
+ return -ENODEV;
+ }
+
+ priv->hw_data = init_data->hw_data;
+ priv->enabled = -EINVAL;
+ priv->uv = -ENOTRECOVERABLE;
+ if (ofnode_read_u32(dev_ofnode(dev), "regulator-initial-mode", &priv->mode))
+ priv->mode = -EINVAL;
+
+ plat_data->mode = priv->hw_data->pmic_mode_map;
+ plat_data->mode_count = priv->hw_data->n_modes;
+
+ return 0;
+}
+
+/* for non-drm, xob, or bypass regulators add additional driver definitions */
+U_BOOT_DRIVER(rpmh_regulator_drm) = {
+ .name = "rpmh_regulator_drm",
+ .id = UCLASS_REGULATOR,
+ .probe = rpmh_regulator_probe,
+ .priv_auto = sizeof(struct rpmh_vreg),
+ .ops = &rpmh_regulator_vrm_drms_ops,
+};
+
+/* This driver intentionally only supports a subset of the available regulators.
+ * This function checks to see if a given regulator node in DT matches a regulator
+ * defined in the driver.
+ */
+static const struct rpmh_vreg_init_data *
+vreg_get_init_data(const struct rpmh_vreg_init_data *init_data, ofnode node)
+{
+ const struct rpmh_vreg_init_data *data;
+
+ for (data = init_data; data->name; data++) {
+ if (!strcmp(data->name, ofnode_get_name(node)))
+ return data;
+ }
+
+ return NULL;
+}
+
+static int rpmh_regulators_bind(struct udevice *dev)
+{
+ const struct rpmh_vreg_init_data *init_data, *data;
+ const char *pmic_id;
+ char *name;
+ struct driver *drv;
+ ofnode node;
+ int ret;
+ size_t namelen;
+
+ init_data = (const struct rpmh_vreg_init_data *)dev_get_driver_data(dev);
+ if (!init_data) {
+ dev_err(dev, "No RPMh regulator init data\n");
+ return -ENODEV;
+ }
+
+ pmic_id = ofnode_read_string(dev_ofnode(dev), "qcom,pmic-id");
+ if (!pmic_id) {
+ dev_err(dev, "No PMIC ID\n");
+ return -ENODEV;
+ }
+
+ drv = lists_driver_lookup_name("rpmh_regulator_drm");
+
+ ofnode_for_each_subnode(node, dev_ofnode(dev)) {
+ data = vreg_get_init_data(init_data, node);
+ if (!data)
+ continue;
+
+ /* %s is replaced with pmic_id, so subtract 2, then add 1 for the null terminator */
+ namelen = strlen(data->resource_name) + strlen(pmic_id) - 1;
+ name = devm_kzalloc(dev, namelen, GFP_KERNEL);
+ ret = snprintf(name, namelen, data->resource_name, pmic_id);
+ if (ret < 0 || ret >= namelen) {
+ dev_err(dev, "Failed to create RPMh regulator name\n");
+ return -ENOMEM;
+ }
+
+ ret = device_bind_with_driver_data(dev, drv, name, (ulong)data,
+ node, NULL);
+ if (ret < 0) {
+ dev_err(dev, "Failed to bind RPMh regulator %s: %d\n", name, ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static const struct udevice_id rpmh_regulator_ids[] = {
+ {
+ .compatible = "qcom,pm8150-rpmh-regulators",
+ .data = (ulong)pm8150_vreg_data,
+ },
+ {
+ .compatible = "qcom,pm8150l-rpmh-regulators",
+ .data = (ulong)pm8150l_vreg_data,
+ },
+ { /* sentinal */ },
+};
+
+/* Driver for a 'bank' of regulators. This creates devices for each
+ * individual regulator
+ */
+U_BOOT_DRIVER(rpmh_regulators) = {
+ .name = "rpmh_regulators",
+ .id = UCLASS_MISC,
+ .bind = rpmh_regulators_bind,
+ .of_match = rpmh_regulator_ids,
+ .ops = &rpmh_regulator_vrm_drms_ops,
+};
+
+MODULE_DESCRIPTION("Qualcomm RPMh regulator driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index cee506f..8ef408d 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -48,6 +48,7 @@
This allows other drivers to verify the SoC familiy & revision using
matching SoC attributes.
+source "drivers/soc/qcom/Kconfig"
source "drivers/soc/samsung/Kconfig"
source "drivers/soc/ti/Kconfig"
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index 5ec89a0..00e6a5a 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -3,6 +3,7 @@
# Makefile for the U-Boot SOC specific device drivers.
obj-$(CONFIG_SOC_AMD_VERSAL2) += soc_amd_versal2.o
+obj-$(CONFIG_SOC_QCOM) += qcom/
obj-$(CONFIG_SOC_SAMSUNG) += samsung/
obj-$(CONFIG_SOC_TI) += ti/
obj-$(CONFIG_SOC_DEVICE) += soc-uclass.o
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
new file mode 100644
index 0000000..4aa7833
--- /dev/null
+++ b/drivers/soc/qcom/Kconfig
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# QCOM Soc drivers
+#
+menuconfig SOC_QCOM
+ bool "Qualcomm SOC drivers support"
+ help
+ Say Y here if you want to enable Qualcomm SOC drivers support.
+
+if SOC_QCOM
+
+config QCOM_COMMAND_DB
+ bool "Qualcomm Command DB"
+ help
+ Command DB queries shared memory by key string for shared system
+ resources. Platform drivers that require to set state of a shared
+ resource on a RPM-hardened platform must use this database to get
+ SoC specific identifier and information for the shared resources.
+
+config QCOM_RPMH
+ bool "Qualcomm RPMh support"
+ depends on QCOM_COMMAND_DB
+ help
+ Say y here to support the Qualcomm RPMh (resource peripheral manager)
+ if you need to control regulators on Qualcomm platforms, say y here.
+
+endif # SOC_QCOM
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
new file mode 100644
index 0000000..78fae8b
--- /dev/null
+++ b/drivers/soc/qcom/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o
+obj-$(CONFIG_QCOM_RPMH) += rpmh-rsc.o rpmh.o
diff --git a/drivers/soc/qcom/cmd-db.c b/drivers/soc/qcom/cmd-db.c
new file mode 100644
index 0000000..08736ea
--- /dev/null
+++ b/drivers/soc/qcom/cmd-db.c
@@ -0,0 +1,225 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2016-2018, 2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#define pr_fmt(fmt) "cmd-db: " fmt
+
+#include <dm.h>
+#include <dm/ofnode.h>
+#include <dm/device_compat.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/byteorder/generic.h>
+
+#include <soc/qcom/cmd-db.h>
+
+#define NUM_PRIORITY 2
+#define MAX_SLV_ID 8
+#define SLAVE_ID_MASK 0x7
+#define SLAVE_ID_SHIFT 16
+#define SLAVE_ID(addr) FIELD_GET(GENMASK(19, 16), addr)
+#define VRM_ADDR(addr) FIELD_GET(GENMASK(19, 4), addr)
+
+/**
+ * struct entry_header: header for each entry in cmddb
+ *
+ * @id: resource's identifier
+ * @priority: unused
+ * @addr: the address of the resource
+ * @len: length of the data
+ * @offset: offset from :@data_offset, start of the data
+ */
+struct entry_header {
+ u8 id[8];
+ __le32 priority[NUM_PRIORITY];
+ __le32 addr;
+ __le16 len;
+ __le16 offset;
+};
+
+/**
+ * struct rsc_hdr: resource header information
+ *
+ * @slv_id: id for the resource
+ * @header_offset: entry's header at offset from the end of the cmd_db_header
+ * @data_offset: entry's data at offset from the end of the cmd_db_header
+ * @cnt: number of entries for HW type
+ * @version: MSB is major, LSB is minor
+ * @reserved: reserved for future use.
+ */
+struct rsc_hdr {
+ __le16 slv_id;
+ __le16 header_offset;
+ __le16 data_offset;
+ __le16 cnt;
+ __le16 version;
+ __le16 reserved[3];
+};
+
+/**
+ * struct cmd_db_header: The DB header information
+ *
+ * @version: The cmd db version
+ * @magic: constant expected in the database
+ * @header: array of resources
+ * @checksum: checksum for the header. Unused.
+ * @reserved: reserved memory
+ * @data: driver specific data
+ */
+struct cmd_db_header {
+ __le32 version;
+ u8 magic[4];
+ struct rsc_hdr header[MAX_SLV_ID];
+ __le32 checksum;
+ __le32 reserved;
+ u8 data[];
+};
+
+/**
+ * DOC: Description of the Command DB database.
+ *
+ * At the start of the command DB memory is the cmd_db_header structure.
+ * The cmd_db_header holds the version, checksum, magic key as well as an
+ * array for header for each slave (depicted by the rsc_header). Each h/w
+ * based accelerator is a 'slave' (shared resource) and has slave id indicating
+ * the type of accelerator. The rsc_header is the header for such individual
+ * slaves of a given type. The entries for each of these slaves begin at the
+ * rsc_hdr.header_offset. In addition each slave could have auxiliary data
+ * that may be needed by the driver. The data for the slave starts at the
+ * entry_header.offset to the location pointed to by the rsc_hdr.data_offset.
+ *
+ * Drivers have a stringified key to a slave/resource. They can query the slave
+ * information and get the slave id and the auxiliary data and the length of the
+ * data. Using this information, they can format the request to be sent to the
+ * h/w accelerator and request a resource state.
+ */
+
+static const u8 CMD_DB_MAGIC[] = { 0xdb, 0x30, 0x03, 0x0c };
+
+static bool cmd_db_magic_matches(const struct cmd_db_header *header)
+{
+ const u8 *magic = header->magic;
+
+ return memcmp(magic, CMD_DB_MAGIC, ARRAY_SIZE(CMD_DB_MAGIC)) == 0;
+}
+
+static struct cmd_db_header *cmd_db_header __section(".data") = NULL;
+
+static inline const void *rsc_to_entry_header(const struct rsc_hdr *hdr)
+{
+ u16 offset = le16_to_cpu(hdr->header_offset);
+
+ return cmd_db_header->data + offset;
+}
+
+static inline void *
+rsc_offset(const struct rsc_hdr *hdr, const struct entry_header *ent)
+{
+ u16 offset = le16_to_cpu(hdr->data_offset);
+ u16 loffset = le16_to_cpu(ent->offset);
+
+ return cmd_db_header->data + offset + loffset;
+}
+
+static int cmd_db_get_header(const char *id, const struct entry_header **eh,
+ const struct rsc_hdr **rh)
+{
+ const struct rsc_hdr *rsc_hdr;
+ const struct entry_header *ent;
+ int i, j;
+ u8 query[sizeof(ent->id)] __nonstring;
+
+ strncpy(query, id, sizeof(query));
+
+ for (i = 0; i < MAX_SLV_ID; i++) {
+ rsc_hdr = &cmd_db_header->header[i];
+ if (!rsc_hdr->slv_id)
+ break;
+
+ ent = rsc_to_entry_header(rsc_hdr);
+ for (j = 0; j < le16_to_cpu(rsc_hdr->cnt); j++, ent++) {
+ if (memcmp(ent->id, query, sizeof(ent->id)) == 0) {
+ if (eh)
+ *eh = ent;
+ if (rh)
+ *rh = rsc_hdr;
+ return 0;
+ }
+ }
+ }
+
+ return -ENODEV;
+}
+
+/**
+ * cmd_db_read_addr() - Query command db for resource id address.
+ *
+ * @id: resource id to query for address
+ *
+ * Return: resource address on success, 0 on error
+ *
+ * This is used to retrieve resource address based on resource
+ * id.
+ */
+u32 cmd_db_read_addr(const char *id)
+{
+ int ret;
+ const struct entry_header *ent;
+
+ debug("%s(%s)\n", __func__, id);
+
+ if (!cmd_db_header) {
+ log_err("%s: Command DB not initialized\n", __func__);
+ return 0;
+ }
+
+ ret = cmd_db_get_header(id, &ent, NULL);
+
+ return ret < 0 ? 0 : le32_to_cpu(ent->addr);
+}
+EXPORT_SYMBOL_GPL(cmd_db_read_addr);
+
+int cmd_db_bind(struct udevice *dev)
+{
+ void __iomem *base;
+ ofnode node;
+
+ if (cmd_db_header)
+ return 0;
+
+ node = dev_ofnode(dev);
+
+ debug("%s(%s)\n", __func__, ofnode_get_name(node));
+
+ base = (void __iomem *)ofnode_get_addr(node);
+ if ((fdt_addr_t)base == FDT_ADDR_T_NONE) {
+ log_err("%s: Failed to read base address\n", __func__);
+ return -ENOENT;
+ }
+
+ cmd_db_header = base;
+ if (!cmd_db_magic_matches(cmd_db_header)) {
+ log_err("%s: Invalid Command DB Magic\n", __func__);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct udevice_id cmd_db_ids[] = {
+ { .compatible = "qcom,cmd-db" },
+ { }
+};
+
+U_BOOT_DRIVER(qcom_cmd_db) = {
+ .name = "qcom_cmd_db",
+ .id = UCLASS_MISC,
+ .bind = cmd_db_bind,
+ .of_match = cmd_db_ids,
+};
+
+MODULE_DESCRIPTION("Qualcomm Technologies, Inc. Command DB Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/qcom/rpmh-internal.h b/drivers/soc/qcom/rpmh-internal.h
new file mode 100644
index 0000000..ac8f6c3
--- /dev/null
+++ b/drivers/soc/qcom/rpmh-internal.h
@@ -0,0 +1,138 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
+ */
+
+
+#ifndef __RPM_INTERNAL_H__
+#define __RPM_INTERNAL_H__
+
+#include <linux/bitmap.h>
+#include <soc/qcom/tcs.h>
+
+#define TCS_TYPE_NR 4
+#define MAX_CMDS_PER_TCS 16
+#define MAX_TCS_PER_TYPE 3
+#define MAX_TCS_NR (MAX_TCS_PER_TYPE * TCS_TYPE_NR)
+#define MAX_TCS_SLOTS (MAX_CMDS_PER_TCS * MAX_TCS_PER_TYPE)
+
+#define USEC_PER_SEC 1000000UL
+
+struct rsc_drv;
+
+/**
+ * struct tcs_group: group of Trigger Command Sets (TCS) to send state requests
+ * to the controller
+ *
+ * @drv: The controller.
+ * @type: Type of the TCS in this group - active, sleep, wake.
+ * @mask: Mask of the TCSes relative to all the TCSes in the RSC.
+ * @offset: Start of the TCS group relative to the TCSes in the RSC.
+ * @num_tcs: Number of TCSes in this type.
+ * @ncpt: Number of commands in each TCS.
+ * @req: Requests that are sent from the TCS; only used for ACTIVE_ONLY
+ * transfers (could be on a wake/sleep TCS if we are borrowing for
+ * an ACTIVE_ONLY transfer).
+ * Start: grab drv->lock, set req, set tcs_in_use, drop drv->lock,
+ * trigger
+ * End: get irq, access req,
+ * grab drv->lock, clear tcs_in_use, drop drv->lock
+ * @slots: Indicates which of @cmd_addr are occupied; only used for
+ * SLEEP / WAKE TCSs. Things are tightly packed in the
+ * case that (ncpt < MAX_CMDS_PER_TCS). That is if ncpt = 2 and
+ * MAX_CMDS_PER_TCS = 16 then bit[2] = the first bit in 2nd TCS.
+ */
+struct tcs_group {
+ struct rsc_drv *drv;
+ int type;
+ u32 mask;
+ u32 offset;
+ int num_tcs;
+ int ncpt;
+ const struct tcs_request *req[MAX_TCS_PER_TYPE];
+ DECLARE_BITMAP(slots, MAX_TCS_SLOTS);
+};
+
+/**
+ * struct rpmh_request: the message to be sent to rpmh-rsc
+ *
+ * @msg: the request
+ * @cmd: the payload that will be part of the @msg
+ * @completion: triggered when request is done
+ * @dev: the device making the request
+ * @needs_free: check to free dynamically allocated request object
+ */
+struct rpmh_request {
+ struct tcs_request msg;
+ struct tcs_cmd cmd[MAX_RPMH_PAYLOAD];
+ const struct udevice *dev;
+ bool needs_free;
+};
+
+/**
+ * struct rpmh_ctrlr: our representation of the controller
+ *
+ * @cache: the list of cached requests
+ * @cache_lock: synchronize access to the cache data
+ * @dirty: was the cache updated since flush
+ * @batch_cache: Cache sleep and wake requests sent as batch
+ */
+struct rpmh_ctrlr {
+ struct list_head cache;
+ bool dirty;
+ struct list_head batch_cache;
+};
+
+struct rsc_ver {
+ u32 major;
+ u32 minor;
+};
+
+/**
+ * struct rsc_drv: the Direct Resource Voter (DRV) of the
+ * Resource State Coordinator controller (RSC)
+ *
+ * @name: Controller identifier.
+ * @base: Start address of the DRV registers in this controller.
+ * @tcs_base: Start address of the TCS registers in this controller.
+ * @id: Instance id in the controller (Direct Resource Voter).
+ * @num_tcs: Number of TCSes in this DRV.
+ * @rsc_pm: CPU PM notifier for controller.
+ * Used when solver mode is not present.
+ * @cpus_in_pm: Number of CPUs not in idle power collapse.
+ * Used when solver mode and "power-domains" is not present.
+ * @genpd_nb: PM Domain notifier for cluster genpd notifications.
+ * @tcs: TCS groups.
+ * @tcs_in_use: S/W state of the TCS; only set for ACTIVE_ONLY
+ * transfers, but might show a sleep/wake TCS in use if
+ * it was borrowed for an active_only transfer. You
+ * must hold the lock in this struct (AKA drv->lock) in
+ * order to update this.
+ * @lock: Synchronize state of the controller. If RPMH's cache
+ * lock will also be held, the order is: drv->lock then
+ * cache_lock.
+ * @tcs_wait: Wait queue used to wait for @tcs_in_use to free up a
+ * slot
+ * @client: Handle to the DRV's client.
+ * @dev: RSC device.
+ */
+struct rsc_drv {
+ const char *name;
+ void __iomem *base;
+ void __iomem *tcs_base;
+ int id;
+ int num_tcs;
+ struct tcs_group tcs[TCS_TYPE_NR];
+ DECLARE_BITMAP(tcs_in_use, MAX_TCS_NR);
+ struct rpmh_ctrlr client;
+ struct udevice *dev;
+ struct rsc_ver ver;
+ u32 *regs;
+};
+
+int rpmh_rsc_send_data(struct rsc_drv *drv, const struct tcs_request *msg);
+int rpmh_rsc_write_ctrl_data(struct rsc_drv *drv,
+ const struct tcs_request *msg);
+void rpmh_rsc_invalidate(struct rsc_drv *drv);
+
+#endif /* __RPM_INTERNAL_H__ */
diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
new file mode 100644
index 0000000..61fb2e6
--- /dev/null
+++ b/drivers/soc/qcom/rpmh-rsc.c
@@ -0,0 +1,505 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#define pr_fmt(fmt) "%s " fmt, KBUILD_MODNAME
+
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <dm/devres.h>
+#include <dm/lists.h>
+#include <dm/ofnode.h>
+#include <linux/bitmap.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/types.h>
+#include <asm/bitops.h>
+#include <asm/io.h>
+
+#include <log.h>
+
+#include <soc/qcom/tcs.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+#include "rpmh-internal.h"
+
+
+#define RSC_DRV_ID 0
+
+#define MAJOR_VER_MASK 0xFF
+#define MAJOR_VER_SHIFT 16
+#define MINOR_VER_MASK 0xFF
+#define MINOR_VER_SHIFT 8
+
+enum {
+ RSC_DRV_TCS_OFFSET,
+ RSC_DRV_CMD_OFFSET,
+ DRV_SOLVER_CONFIG,
+ DRV_PRNT_CHLD_CONFIG,
+ RSC_DRV_IRQ_ENABLE,
+ RSC_DRV_IRQ_STATUS,
+ RSC_DRV_IRQ_CLEAR,
+ RSC_DRV_CMD_WAIT_FOR_CMPL,
+ RSC_DRV_CONTROL,
+ RSC_DRV_STATUS,
+ RSC_DRV_CMD_ENABLE,
+ RSC_DRV_CMD_MSGID,
+ RSC_DRV_CMD_ADDR,
+ RSC_DRV_CMD_DATA,
+ RSC_DRV_CMD_STATUS,
+ RSC_DRV_CMD_RESP_DATA,
+};
+
+/* DRV HW Solver Configuration Information Register */
+#define DRV_HW_SOLVER_MASK 1
+#define DRV_HW_SOLVER_SHIFT 24
+
+/* DRV TCS Configuration Information Register */
+#define DRV_NUM_TCS_MASK 0x3F
+#define DRV_NUM_TCS_SHIFT 6
+#define DRV_NCPT_MASK 0x1F
+#define DRV_NCPT_SHIFT 27
+
+/* Offsets for CONTROL TCS Registers */
+#define RSC_DRV_CTL_TCS_DATA_HI 0x38
+#define RSC_DRV_CTL_TCS_DATA_HI_MASK 0xFFFFFF
+#define RSC_DRV_CTL_TCS_DATA_HI_VALID BIT(31)
+#define RSC_DRV_CTL_TCS_DATA_LO 0x40
+#define RSC_DRV_CTL_TCS_DATA_LO_MASK 0xFFFFFFFF
+#define RSC_DRV_CTL_TCS_DATA_SIZE 32
+
+#define TCS_AMC_MODE_ENABLE BIT(16)
+#define TCS_AMC_MODE_TRIGGER BIT(24)
+
+/* TCS CMD register bit mask */
+#define CMD_MSGID_LEN 8
+#define CMD_MSGID_RESP_REQ BIT(8)
+#define CMD_MSGID_WRITE BIT(16)
+#define CMD_STATUS_ISSUED BIT(8)
+#define CMD_STATUS_COMPL BIT(16)
+
+/*
+ * Here's a high level overview of how all the registers in RPMH work
+ * together:
+ *
+ * - The main rpmh-rsc address is the base of a register space that can
+ * be used to find overall configuration of the hardware
+ * (DRV_PRNT_CHLD_CONFIG). Also found within the rpmh-rsc register
+ * space are all the TCS blocks. The offset of the TCS blocks is
+ * specified in the device tree by "qcom,tcs-offset" and used to
+ * compute tcs_base.
+ * - TCS blocks come one after another. Type, count, and order are
+ * specified by the device tree as "qcom,tcs-config".
+ * - Each TCS block has some registers, then space for up to 16 commands.
+ * Note that though address space is reserved for 16 commands, fewer
+ * might be present. See ncpt (num cmds per TCS).
+ *
+ * Here's a picture:
+ *
+ * +---------------------------------------------------+
+ * |RSC |
+ * | ctrl |
+ * | |
+ * | Drvs: |
+ * | +-----------------------------------------------+ |
+ * | |DRV0 | |
+ * | | ctrl/config | |
+ * | | IRQ | |
+ * | | | |
+ * | | TCSes: | |
+ * | | +------------------------------------------+ | |
+ * | | |TCS0 | | | | | | | | | | | | | | |
+ * | | | ctrl | 0| 1| 2| 3| 4| 5| .| .| .| .|14|15| | |
+ * | | | | | | | | | | | | | | | | | |
+ * | | +------------------------------------------+ | |
+ * | | +------------------------------------------+ | |
+ * | | |TCS1 | | | | | | | | | | | | | | |
+ * | | | ctrl | 0| 1| 2| 3| 4| 5| .| .| .| .|14|15| | |
+ * | | | | | | | | | | | | | | | | | |
+ * | | +------------------------------------------+ | |
+ * | | +------------------------------------------+ | |
+ * | | |TCS2 | | | | | | | | | | | | | | |
+ * | | | ctrl | 0| 1| 2| 3| 4| 5| .| .| .| .|14|15| | |
+ * | | | | | | | | | | | | | | | | | |
+ * | | +------------------------------------------+ | |
+ * | | ...... | |
+ * | +-----------------------------------------------+ |
+ * | +-----------------------------------------------+ |
+ * | |DRV1 | |
+ * | | (same as DRV0) | |
+ * | +-----------------------------------------------+ |
+ * | ...... |
+ * +---------------------------------------------------+
+ */
+
+static u32 rpmh_rsc_reg_offset_ver_2_7[] = {
+ [RSC_DRV_TCS_OFFSET] = 672,
+ [RSC_DRV_CMD_OFFSET] = 20,
+ [DRV_SOLVER_CONFIG] = 0x04,
+ [DRV_PRNT_CHLD_CONFIG] = 0x0C,
+ [RSC_DRV_IRQ_ENABLE] = 0x00,
+ [RSC_DRV_IRQ_STATUS] = 0x04,
+ [RSC_DRV_IRQ_CLEAR] = 0x08,
+ [RSC_DRV_CMD_WAIT_FOR_CMPL] = 0x10,
+ [RSC_DRV_CONTROL] = 0x14,
+ [RSC_DRV_STATUS] = 0x18,
+ [RSC_DRV_CMD_ENABLE] = 0x1C,
+ [RSC_DRV_CMD_MSGID] = 0x30,
+ [RSC_DRV_CMD_ADDR] = 0x34,
+ [RSC_DRV_CMD_DATA] = 0x38,
+ [RSC_DRV_CMD_STATUS] = 0x3C,
+ [RSC_DRV_CMD_RESP_DATA] = 0x40,
+};
+
+static u32 rpmh_rsc_reg_offset_ver_3_0[] = {
+ [RSC_DRV_TCS_OFFSET] = 672,
+ [RSC_DRV_CMD_OFFSET] = 24,
+ [DRV_SOLVER_CONFIG] = 0x04,
+ [DRV_PRNT_CHLD_CONFIG] = 0x0C,
+ [RSC_DRV_IRQ_ENABLE] = 0x00,
+ [RSC_DRV_IRQ_STATUS] = 0x04,
+ [RSC_DRV_IRQ_CLEAR] = 0x08,
+ [RSC_DRV_CMD_WAIT_FOR_CMPL] = 0x20,
+ [RSC_DRV_CONTROL] = 0x24,
+ [RSC_DRV_STATUS] = 0x28,
+ [RSC_DRV_CMD_ENABLE] = 0x2C,
+ [RSC_DRV_CMD_MSGID] = 0x34,
+ [RSC_DRV_CMD_ADDR] = 0x38,
+ [RSC_DRV_CMD_DATA] = 0x3C,
+ [RSC_DRV_CMD_STATUS] = 0x40,
+ [RSC_DRV_CMD_RESP_DATA] = 0x44,
+};
+
+static inline void __iomem *
+tcs_reg_addr(const struct rsc_drv *drv, int reg, int tcs_id)
+{
+ return drv->tcs_base + drv->regs[RSC_DRV_TCS_OFFSET] * tcs_id + reg;
+}
+
+static inline void __iomem *
+tcs_cmd_addr(const struct rsc_drv *drv, int reg, int tcs_id, int cmd_id)
+{
+ return tcs_reg_addr(drv, reg, tcs_id) + drv->regs[RSC_DRV_CMD_OFFSET] * cmd_id;
+}
+
+static u32 read_tcs_cmd(const struct rsc_drv *drv, int reg, int tcs_id,
+ int cmd_id)
+{
+ return readl_relaxed(tcs_cmd_addr(drv, reg, tcs_id, cmd_id));
+}
+
+static u32 read_tcs_reg(const struct rsc_drv *drv, int reg, int tcs_id)
+{
+ return readl_relaxed(tcs_reg_addr(drv, reg, tcs_id));
+}
+
+static void write_tcs_cmd(const struct rsc_drv *drv, int reg, int tcs_id,
+ int cmd_id, u32 data)
+{
+ writel_relaxed(data, tcs_cmd_addr(drv, reg, tcs_id, cmd_id));
+}
+
+static void write_tcs_reg(const struct rsc_drv *drv, int reg, int tcs_id,
+ u32 data)
+{
+ writel_relaxed(data, tcs_reg_addr(drv, reg, tcs_id));
+}
+
+static void write_tcs_reg_sync(const struct rsc_drv *drv, int reg, int tcs_id,
+ u32 data)
+{
+ int i;
+
+ writel(data, tcs_reg_addr(drv, reg, tcs_id));
+
+ /*
+ * Wait until we read back the same value. Use a counter rather than
+ * ktime for timeout since this may be called after timekeeping stops.
+ */
+ for (i = 0; i < USEC_PER_SEC; i++) {
+ if (readl(tcs_reg_addr(drv, reg, tcs_id)) == data)
+ return;
+ udelay(1);
+ }
+ pr_err("%s: error writing %#x to %d:%#x\n", drv->name,
+ data, tcs_id, reg);
+}
+
+/**
+ * get_tcs_for_msg() - Get the tcs_group used to send the given message.
+ * @drv: The RSC controller.
+ * @msg: The message we want to send.
+ *
+ * This is normally pretty straightforward except if we are trying to send
+ * an ACTIVE_ONLY message but don't have any active_only TCSes.
+ *
+ * Return: A pointer to a tcs_group or an ERR_PTR.
+ */
+static struct tcs_group *get_tcs_for_msg(struct rsc_drv *drv,
+ const struct tcs_request *msg)
+{
+ /*
+ * U-Boot: since we're single threaded and running synchronously we can
+ * just always used the first active TCS.
+ */
+ if (msg->state != RPMH_ACTIVE_ONLY_STATE) {
+ log_err("WARN: only ACTIVE_ONLY state supported\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ return &drv->tcs[ACTIVE_TCS];
+}
+
+/**
+ * __tcs_buffer_write() - Write to TCS hardware from a request; don't trigger.
+ * @drv: The controller.
+ * @tcs_id: The global ID of this TCS.
+ * @cmd_id: The index within the TCS to start writing.
+ * @msg: The message we want to send, which will contain several addr/data
+ * pairs to program (but few enough that they all fit in one TCS).
+ *
+ * This is used for all types of transfers (active, sleep, and wake).
+ */
+static void __tcs_buffer_write(struct rsc_drv *drv, int tcs_id, int cmd_id,
+ const struct tcs_request *msg)
+{
+ u32 msgid;
+ u32 cmd_msgid = CMD_MSGID_LEN | CMD_MSGID_WRITE;
+ u32 cmd_enable = 0;
+ struct tcs_cmd *cmd;
+ int i, j;
+
+ for (i = 0, j = cmd_id; i < msg->num_cmds; i++, j++) {
+ cmd = &msg->cmds[i];
+ cmd_enable |= BIT(j);
+ msgid = cmd_msgid;
+ /*
+ * Additionally, if the cmd->wait is set, make the command
+ * response reqd even if the overall request was fire-n-forget.
+ */
+ msgid |= cmd->wait ? CMD_MSGID_RESP_REQ : 0;
+
+ write_tcs_cmd(drv, drv->regs[RSC_DRV_CMD_MSGID], tcs_id, j, msgid);
+ write_tcs_cmd(drv, drv->regs[RSC_DRV_CMD_ADDR], tcs_id, j, cmd->addr);
+ write_tcs_cmd(drv, drv->regs[RSC_DRV_CMD_DATA], tcs_id, j, cmd->data);
+ debug("tcs(m): %d [%s] cmd(n): %d msgid: %#x addr: %#x data: %#x complete: %d\n",
+ tcs_id, msg->state == RPMH_ACTIVE_ONLY_STATE ? "active" : "?", j, msgid,
+ cmd->addr, cmd->data, cmd->wait);
+ }
+
+ cmd_enable |= read_tcs_reg(drv, drv->regs[RSC_DRV_CMD_ENABLE], tcs_id);
+ write_tcs_reg(drv, drv->regs[RSC_DRV_CMD_ENABLE], tcs_id, cmd_enable);
+}
+
+/**
+ * rpmh_rsc_send_data() - Write / trigger active-only message.
+ * @drv: The controller.
+ * @msg: The data to be sent.
+ *
+ * NOTES:
+ * - This is only used for "ACTIVE_ONLY" since the limitations of this
+ * function don't make sense for sleep/wake cases.
+ * - To do the transfer, we will grab a whole TCS for ourselves--we don't
+ * try to share. If there are none available we'll wait indefinitely
+ * for a free one.
+ * - This function will not wait for the commands to be finished, only for
+ * data to be programmed into the RPMh. See rpmh_tx_done() which will
+ * be called when the transfer is fully complete.
+ * - This function must be called with interrupts enabled. If the hardware
+ * is busy doing someone else's transfer we need that transfer to fully
+ * finish so that we can have the hardware, and to fully finish it needs
+ * the interrupt handler to run. If the interrupts is set to run on the
+ * active CPU this can never happen if interrupts are disabled.
+ *
+ * Return: 0 on success, -EINVAL on error.
+ */
+int rpmh_rsc_send_data(struct rsc_drv *drv, const struct tcs_request *msg)
+{
+ struct tcs_group *tcs;
+ int tcs_id, i;
+ u32 addr;
+
+ tcs = get_tcs_for_msg(drv, msg);
+ if (IS_ERR(tcs))
+ return PTR_ERR(tcs);
+
+ /* u-boot is single-threaded, always use the first TCS as we'll never conflict */
+ tcs_id = tcs->offset;
+
+ tcs->req[tcs_id - tcs->offset] = msg;
+ generic_set_bit(tcs_id, drv->tcs_in_use);
+ if (msg->state == RPMH_ACTIVE_ONLY_STATE && tcs->type != ACTIVE_TCS) {
+ /*
+ * Clear previously programmed WAKE commands in selected
+ * repurposed TCS to avoid triggering them. tcs->slots will be
+ * cleaned from rpmh_flush() by invoking rpmh_rsc_invalidate()
+ */
+ write_tcs_reg_sync(drv, drv->regs[RSC_DRV_CMD_ENABLE], tcs_id, 0);
+ }
+
+ /*
+ * These two can be done after the lock is released because:
+ * - We marked "tcs_in_use" under lock.
+ * - Once "tcs_in_use" has been marked nobody else could be writing
+ * to these registers until the interrupt goes off.
+ * - The interrupt can't go off until we trigger w/ the last line
+ * of __tcs_set_trigger() below.
+ */
+ __tcs_buffer_write(drv, tcs_id, 0, msg);
+
+ /* U-Boot: Now wait for the TCS to be cleared, indicating that we're done */
+ for (i = 0; i < USEC_PER_SEC; i++) {
+ addr = read_tcs_cmd(drv, drv->regs[RSC_DRV_CMD_ADDR], i, 0);
+ if (addr != msg->cmds[0].addr)
+ break;
+ udelay(1);
+ }
+
+ if (i == USEC_PER_SEC) {
+ log_err("%s: error writing %#x to %d:%#x\n", drv->name,
+ msg->cmds[0].addr, tcs_id, drv->regs[RSC_DRV_CMD_ADDR]);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int rpmh_probe_tcs_config(struct udevice *dev, struct rsc_drv *drv)
+{
+ struct tcs_type_config {
+ u32 type;
+ u32 n;
+ } tcs_cfg[TCS_TYPE_NR] = { { 0 } };
+ ofnode dn = dev_ofnode(dev);
+ u32 config, max_tcs, ncpt, offset;
+ int i, ret, n, st = 0;
+ struct tcs_group *tcs;
+
+ ret = ofnode_read_u32(dn, "qcom,tcs-offset", &offset);
+ if (ret)
+ return ret;
+ drv->tcs_base = drv->base + offset;
+
+ config = readl_relaxed(drv->base + drv->regs[DRV_PRNT_CHLD_CONFIG]);
+
+ max_tcs = config;
+ max_tcs &= DRV_NUM_TCS_MASK << (DRV_NUM_TCS_SHIFT * drv->id);
+ max_tcs = max_tcs >> (DRV_NUM_TCS_SHIFT * drv->id);
+
+ ncpt = config & (DRV_NCPT_MASK << DRV_NCPT_SHIFT);
+ ncpt = ncpt >> DRV_NCPT_SHIFT;
+
+ n = ofnode_read_u32_array(dn, "qcom,tcs-config", (u32 *)tcs_cfg, 2 * TCS_TYPE_NR);
+ if (n < 0) {
+ log_err("RPMh: %s: error reading qcom,tcs-config %d\n", dev->name, n);
+ return n;
+ }
+
+ for (i = 0; i < TCS_TYPE_NR; i++) {
+ if (tcs_cfg[i].n > MAX_TCS_PER_TYPE)
+ return -EINVAL;
+ }
+
+ for (i = 0; i < TCS_TYPE_NR; i++) {
+ tcs = &drv->tcs[tcs_cfg[i].type];
+ if (tcs->drv)
+ return -EINVAL;
+ tcs->drv = drv;
+ tcs->type = tcs_cfg[i].type;
+ tcs->num_tcs = tcs_cfg[i].n;
+ tcs->ncpt = ncpt;
+
+ if (!tcs->num_tcs || tcs->type == CONTROL_TCS)
+ continue;
+
+ if (st + tcs->num_tcs > max_tcs ||
+ st + tcs->num_tcs >= BITS_PER_BYTE * sizeof(tcs->mask))
+ return -EINVAL;
+
+ tcs->mask = ((1 << tcs->num_tcs) - 1) << st;
+ tcs->offset = st;
+ st += tcs->num_tcs;
+ }
+
+ drv->num_tcs = st;
+
+ return 0;
+}
+
+static int rpmh_rsc_probe(struct udevice *dev)
+{
+ ofnode dn = dev_ofnode(dev);
+ struct rsc_drv *drv;
+ char drv_id[10] = {0};
+ int ret;
+ u32 rsc_id;
+
+ drv = dev_get_priv(dev);
+
+ ret = ofnode_read_u32(dn, "qcom,drv-id", &drv->id);
+ if (ret)
+ return ret;
+
+ drv->name = ofnode_get_property(dn, "label", NULL);
+ if (!drv->name)
+ drv->name = dev->name;
+
+ snprintf(drv_id, ARRAY_SIZE(drv_id), "drv-%d", drv->id);
+ drv->base = (void __iomem *)dev_read_addr_name(dev, drv_id);
+ if (IS_ERR(drv->base))
+ return PTR_ERR(drv->base);
+
+ rsc_id = readl_relaxed(drv->base + RSC_DRV_ID);
+ drv->ver.major = rsc_id & (MAJOR_VER_MASK << MAJOR_VER_SHIFT);
+ drv->ver.major >>= MAJOR_VER_SHIFT;
+ drv->ver.minor = rsc_id & (MINOR_VER_MASK << MINOR_VER_SHIFT);
+ drv->ver.minor >>= MINOR_VER_SHIFT;
+
+ if (drv->ver.major == 3)
+ drv->regs = rpmh_rsc_reg_offset_ver_3_0;
+ else
+ drv->regs = rpmh_rsc_reg_offset_ver_2_7;
+
+ ret = rpmh_probe_tcs_config(dev, drv);
+ if (ret)
+ return ret;
+
+ spin_lock_init(&drv->lock);
+ init_waitqueue_head(&drv->tcs_wait);
+ bitmap_zero(drv->tcs_in_use, MAX_TCS_NR);
+
+ /* Enable the active TCS to send requests immediately */
+ writel_relaxed(drv->tcs[ACTIVE_TCS].mask,
+ drv->tcs_base + drv->regs[RSC_DRV_IRQ_ENABLE]);
+
+ spin_lock_init(&drv->client.cache_lock);
+ INIT_LIST_HEAD(&drv->client.cache);
+ INIT_LIST_HEAD(&drv->client.batch_cache);
+
+ dev_set_drvdata(dev, drv);
+ drv->dev = dev;
+
+ log_debug("RPMh: %s: v%d.%d\n", dev->name, drv->ver.major, drv->ver.minor);
+
+ return ret;
+}
+
+static const struct udevice_id qcom_rpmh_ids[] = {
+ { .compatible = "qcom,rpmh-rsc" },
+ { }
+};
+
+U_BOOT_DRIVER(qcom_rpmh_rsc) = {
+ .name = "qcom_rpmh_rsc",
+ .id = UCLASS_MISC,
+ .priv_auto = sizeof(struct rsc_drv),
+ .probe = rpmh_rsc_probe,
+ .of_match = qcom_rpmh_ids,
+ /* rpmh is under CLUSTER_PD which we don't support, so skip trying to enable PDs */
+ .flags = DM_FLAG_DEFAULT_PD_CTRL_OFF,
+};
+
+MODULE_DESCRIPTION("Qualcomm Technologies, Inc. RPMh Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/qcom/rpmh.c b/drivers/soc/qcom/rpmh.c
new file mode 100644
index 0000000..96f14a9
--- /dev/null
+++ b/drivers/soc/qcom/rpmh.c
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
+ */
+
+#include <dm/device.h>
+#include <dm/device_compat.h>
+#include <linux/bug.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/types.h>
+
+#include <soc/qcom/rpmh.h>
+
+#include "rpmh-internal.h"
+
+#define RPMH_TIMEOUT_MS msecs_to_jiffies(10000)
+
+#define DEFINE_RPMH_MSG_ONSTACK(device, s, name) \
+ struct rpmh_request name = { \
+ .msg = { \
+ .state = s, \
+ .cmds = name.cmd, \
+ .num_cmds = 0, \
+ }, \
+ .cmd = { { 0 } }, \
+ .dev = device, \
+ .needs_free = false, \
+ }
+
+#define ctrlr_to_drv(ctrlr) container_of(ctrlr, struct rsc_drv, client)
+
+static struct rpmh_ctrlr *get_rpmh_ctrlr(const struct udevice *dev)
+{
+ struct rsc_drv *drv = (struct rsc_drv *)dev_get_priv(dev->parent);
+
+ if (!drv) {
+ log_err("BUG: no RPMh driver for %s (parent %s)\n", dev->name, dev->parent->name);
+ BUG();
+ }
+
+ return &drv->client;
+}
+
+/**
+ * __rpmh_write: Cache and send the RPMH request
+ *
+ * @dev: The device making the request
+ * @state: Active/Sleep request type
+ * @rpm_msg: The data that needs to be sent (cmds).
+ *
+ * Cache the RPMH request and send if the state is ACTIVE_ONLY.
+ * SLEEP/WAKE_ONLY requests are not sent to the controller at
+ * this time. Use rpmh_flush() to send them to the controller.
+ */
+static int __rpmh_write(const struct udevice *dev, enum rpmh_state state,
+ struct rpmh_request *rpm_msg)
+{
+ struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev);
+
+ if (state != RPMH_ACTIVE_ONLY_STATE) {
+ log_err("only ACTIVE_ONLY state supported\n");
+ return -EINVAL;
+ }
+
+ return rpmh_rsc_send_data(ctrlr_to_drv(ctrlr), &rpm_msg->msg);
+}
+
+static int __fill_rpmh_msg(struct rpmh_request *req, enum rpmh_state state,
+ const struct tcs_cmd *cmd, u32 n)
+{
+ if (!cmd || !n || n > MAX_RPMH_PAYLOAD)
+ return -EINVAL;
+
+ memcpy(req->cmd, cmd, n * sizeof(*cmd));
+
+ req->msg.state = state;
+ req->msg.cmds = req->cmd;
+ req->msg.num_cmds = n;
+
+ debug("rpmh_msg: %d, %d cmds [first %#x/%#x]\n", state, n, cmd->addr, cmd->data);
+
+ return 0;
+}
+
+/**
+ * rpmh_write: Write a set of RPMH commands and block until response
+ *
+ * @dev: The device making the request
+ * @state: Active/sleep set
+ * @cmd: The payload data
+ * @n: The number of elements in @cmd
+ *
+ * May sleep. Do not call from atomic contexts.
+ */
+int rpmh_write(const struct udevice *dev, enum rpmh_state state,
+ const struct tcs_cmd *cmd, u32 n)
+{
+ DEFINE_RPMH_MSG_ONSTACK(dev, state, rpm_msg);
+ int ret;
+
+ ret = __fill_rpmh_msg(&rpm_msg, state, cmd, n);
+ if (ret)
+ return ret;
+
+ ret = __rpmh_write(dev, state, &rpm_msg);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(rpmh_write);
diff --git a/include/dt-bindings/clock/qcom,gcc-ipq4019.h b/include/dt-bindings/clock/qcom,gcc-ipq4019.h
deleted file mode 100644
index 7e8a7be..0000000
--- a/include/dt-bindings/clock/qcom,gcc-ipq4019.h
+++ /dev/null
@@ -1,169 +0,0 @@
-/* Copyright (c) 2015 The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-#ifndef __QCOM_CLK_IPQ4019_H__
-#define __QCOM_CLK_IPQ4019_H__
-
-#define GCC_DUMMY_CLK 0
-#define AUDIO_CLK_SRC 1
-#define BLSP1_QUP1_I2C_APPS_CLK_SRC 2
-#define BLSP1_QUP1_SPI_APPS_CLK_SRC 3
-#define BLSP1_QUP2_I2C_APPS_CLK_SRC 4
-#define BLSP1_QUP2_SPI_APPS_CLK_SRC 5
-#define BLSP1_UART1_APPS_CLK_SRC 6
-#define BLSP1_UART2_APPS_CLK_SRC 7
-#define GCC_USB3_MOCK_UTMI_CLK_SRC 8
-#define GCC_APPS_CLK_SRC 9
-#define GCC_APPS_AHB_CLK_SRC 10
-#define GP1_CLK_SRC 11
-#define GP2_CLK_SRC 12
-#define GP3_CLK_SRC 13
-#define SDCC1_APPS_CLK_SRC 14
-#define FEPHY_125M_DLY_CLK_SRC 15
-#define WCSS2G_CLK_SRC 16
-#define WCSS5G_CLK_SRC 17
-#define GCC_APSS_AHB_CLK 18
-#define GCC_AUDIO_AHB_CLK 19
-#define GCC_AUDIO_PWM_CLK 20
-#define GCC_BLSP1_AHB_CLK 21
-#define GCC_BLSP1_QUP1_I2C_APPS_CLK 22
-#define GCC_BLSP1_QUP1_SPI_APPS_CLK 23
-#define GCC_BLSP1_QUP2_I2C_APPS_CLK 24
-#define GCC_BLSP1_QUP2_SPI_APPS_CLK 25
-#define GCC_BLSP1_UART1_APPS_CLK 26
-#define GCC_BLSP1_UART2_APPS_CLK 27
-#define GCC_DCD_XO_CLK 28
-#define GCC_GP1_CLK 29
-#define GCC_GP2_CLK 30
-#define GCC_GP3_CLK 31
-#define GCC_BOOT_ROM_AHB_CLK 32
-#define GCC_CRYPTO_AHB_CLK 33
-#define GCC_CRYPTO_AXI_CLK 34
-#define GCC_CRYPTO_CLK 35
-#define GCC_ESS_CLK 36
-#define GCC_IMEM_AXI_CLK 37
-#define GCC_IMEM_CFG_AHB_CLK 38
-#define GCC_PCIE_AHB_CLK 39
-#define GCC_PCIE_AXI_M_CLK 40
-#define GCC_PCIE_AXI_S_CLK 41
-#define GCC_PCNOC_AHB_CLK 42
-#define GCC_PRNG_AHB_CLK 43
-#define GCC_QPIC_AHB_CLK 44
-#define GCC_QPIC_CLK 45
-#define GCC_SDCC1_AHB_CLK 46
-#define GCC_SDCC1_APPS_CLK 47
-#define GCC_SNOC_PCNOC_AHB_CLK 48
-#define GCC_SYS_NOC_125M_CLK 49
-#define GCC_SYS_NOC_AXI_CLK 50
-#define GCC_TCSR_AHB_CLK 51
-#define GCC_TLMM_AHB_CLK 52
-#define GCC_USB2_MASTER_CLK 53
-#define GCC_USB2_SLEEP_CLK 54
-#define GCC_USB2_MOCK_UTMI_CLK 55
-#define GCC_USB3_MASTER_CLK 56
-#define GCC_USB3_SLEEP_CLK 57
-#define GCC_USB3_MOCK_UTMI_CLK 58
-#define GCC_WCSS2G_CLK 59
-#define GCC_WCSS2G_REF_CLK 60
-#define GCC_WCSS2G_RTC_CLK 61
-#define GCC_WCSS5G_CLK 62
-#define GCC_WCSS5G_REF_CLK 63
-#define GCC_WCSS5G_RTC_CLK 64
-#define GCC_APSS_DDRPLL_VCO 65
-#define GCC_SDCC_PLLDIV_CLK 66
-#define GCC_FEPLL_VCO 67
-#define GCC_FEPLL125_CLK 68
-#define GCC_FEPLL125DLY_CLK 69
-#define GCC_FEPLL200_CLK 70
-#define GCC_FEPLL500_CLK 71
-#define GCC_FEPLL_WCSS2G_CLK 72
-#define GCC_FEPLL_WCSS5G_CLK 73
-#define GCC_APSS_CPU_PLLDIV_CLK 74
-#define GCC_PCNOC_AHB_CLK_SRC 75
-
-#define WIFI0_CPU_INIT_RESET 0
-#define WIFI0_RADIO_SRIF_RESET 1
-#define WIFI0_RADIO_WARM_RESET 2
-#define WIFI0_RADIO_COLD_RESET 3
-#define WIFI0_CORE_WARM_RESET 4
-#define WIFI0_CORE_COLD_RESET 5
-#define WIFI1_CPU_INIT_RESET 6
-#define WIFI1_RADIO_SRIF_RESET 7
-#define WIFI1_RADIO_WARM_RESET 8
-#define WIFI1_RADIO_COLD_RESET 9
-#define WIFI1_CORE_WARM_RESET 10
-#define WIFI1_CORE_COLD_RESET 11
-#define USB3_UNIPHY_PHY_ARES 12
-#define USB3_HSPHY_POR_ARES 13
-#define USB3_HSPHY_S_ARES 14
-#define USB2_HSPHY_POR_ARES 15
-#define USB2_HSPHY_S_ARES 16
-#define PCIE_PHY_AHB_ARES 17
-#define PCIE_AHB_ARES 18
-#define PCIE_PWR_ARES 19
-#define PCIE_PIPE_STICKY_ARES 20
-#define PCIE_AXI_M_STICKY_ARES 21
-#define PCIE_PHY_ARES 22
-#define PCIE_PARF_XPU_ARES 23
-#define PCIE_AXI_S_XPU_ARES 24
-#define PCIE_AXI_M_VMIDMT_ARES 25
-#define PCIE_PIPE_ARES 26
-#define PCIE_AXI_S_ARES 27
-#define PCIE_AXI_M_ARES 28
-#define ESS_RESET 29
-#define GCC_BLSP1_BCR 30
-#define GCC_BLSP1_QUP1_BCR 31
-#define GCC_BLSP1_UART1_BCR 32
-#define GCC_BLSP1_QUP2_BCR 33
-#define GCC_BLSP1_UART2_BCR 34
-#define GCC_BIMC_BCR 35
-#define GCC_TLMM_BCR 36
-#define GCC_IMEM_BCR 37
-#define GCC_ESS_BCR 38
-#define GCC_PRNG_BCR 39
-#define GCC_BOOT_ROM_BCR 40
-#define GCC_CRYPTO_BCR 41
-#define GCC_SDCC1_BCR 42
-#define GCC_SEC_CTRL_BCR 43
-#define GCC_AUDIO_BCR 44
-#define GCC_QPIC_BCR 45
-#define GCC_PCIE_BCR 46
-#define GCC_USB2_BCR 47
-#define GCC_USB2_PHY_BCR 48
-#define GCC_USB3_BCR 49
-#define GCC_USB3_PHY_BCR 50
-#define GCC_SYSTEM_NOC_BCR 51
-#define GCC_PCNOC_BCR 52
-#define GCC_DCD_BCR 53
-#define GCC_SNOC_BUS_TIMEOUT0_BCR 54
-#define GCC_SNOC_BUS_TIMEOUT1_BCR 55
-#define GCC_SNOC_BUS_TIMEOUT2_BCR 56
-#define GCC_SNOC_BUS_TIMEOUT3_BCR 57
-#define GCC_PCNOC_BUS_TIMEOUT0_BCR 58
-#define GCC_PCNOC_BUS_TIMEOUT1_BCR 59
-#define GCC_PCNOC_BUS_TIMEOUT2_BCR 60
-#define GCC_PCNOC_BUS_TIMEOUT3_BCR 61
-#define GCC_PCNOC_BUS_TIMEOUT4_BCR 62
-#define GCC_PCNOC_BUS_TIMEOUT5_BCR 63
-#define GCC_PCNOC_BUS_TIMEOUT6_BCR 64
-#define GCC_PCNOC_BUS_TIMEOUT7_BCR 65
-#define GCC_PCNOC_BUS_TIMEOUT8_BCR 66
-#define GCC_PCNOC_BUS_TIMEOUT9_BCR 67
-#define GCC_TCSR_BCR 68
-#define GCC_QDSS_BCR 69
-#define GCC_MPM_BCR 70
-#define GCC_SPDM_BCR 71
-
-#endif
diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h
index 0a8503a..40ca221 100644
--- a/include/linux/bitmap.h
+++ b/include/linux/bitmap.h
@@ -196,6 +196,14 @@
}
}
+static inline bool bitmap_empty(const unsigned long *src, unsigned int nbits)
+{
+ if (small_const_nbits(nbits))
+ return !(*src & BITMAP_LAST_WORD_MASK(nbits));
+
+ return find_first_bit(src, nbits) == nbits;
+}
+
static inline void bitmap_or(unsigned long *dst, const unsigned long *src1,
const unsigned long *src2, unsigned int nbits)
{
diff --git a/include/soc/qcom/cmd-db.h b/include/soc/qcom/cmd-db.h
new file mode 100644
index 0000000..1190f2c
--- /dev/null
+++ b/include/soc/qcom/cmd-db.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef __QCOM_COMMAND_DB_H__
+#define __QCOM_COMMAND_DB_H__
+
+#include <linux/err.h>
+
+enum cmd_db_hw_type {
+ CMD_DB_HW_INVALID = 0,
+ CMD_DB_HW_MIN = 3,
+ CMD_DB_HW_ARC = CMD_DB_HW_MIN,
+ CMD_DB_HW_VRM = 4,
+ CMD_DB_HW_BCM = 5,
+ CMD_DB_HW_MAX = CMD_DB_HW_BCM,
+ CMD_DB_HW_ALL = 0xff,
+};
+
+#if IS_ENABLED(CONFIG_QCOM_COMMAND_DB)
+u32 cmd_db_read_addr(const char *resource_id);
+
+#else
+static inline u32 cmd_db_read_addr(const char *resource_id)
+{ return 0; }
+
+#endif /* CONFIG_QCOM_COMMAND_DB */
+#endif /* __QCOM_COMMAND_DB_H__ */
diff --git a/include/soc/qcom/rpmh.h b/include/soc/qcom/rpmh.h
new file mode 100644
index 0000000..3421fbf
--- /dev/null
+++ b/include/soc/qcom/rpmh.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __SOC_QCOM_RPMH_H__
+#define __SOC_QCOM_RPMH_H__
+
+#include <dm/device-internal.h>
+#include <soc/qcom/tcs.h>
+
+
+#if IS_ENABLED(CONFIG_QCOM_RPMH)
+int rpmh_write(const struct udevice *dev, enum rpmh_state state,
+ const struct tcs_cmd *cmd, u32 n);
+
+#else
+
+static inline int rpmh_write(const struct device *dev, enum rpmh_state state,
+ const struct tcs_cmd *cmd, u32 n)
+{ return -ENODEV; }
+
+#endif /* CONFIG_QCOM_RPMH */
+
+/* u-boot: no multithreading */
+#define rpmh_write_async(dev, state, cmd, n) rpmh_write(dev, state, cmd, n)
+
+#endif /* __SOC_QCOM_RPMH_H__ */
diff --git a/include/soc/qcom/tcs.h b/include/soc/qcom/tcs.h
new file mode 100644
index 0000000..3acca06
--- /dev/null
+++ b/include/soc/qcom/tcs.h
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __SOC_QCOM_TCS_H__
+#define __SOC_QCOM_TCS_H__
+
+#define MAX_RPMH_PAYLOAD 16
+
+/**
+ * rpmh_state: state for the request
+ *
+ * RPMH_SLEEP_STATE: State of the resource when the processor subsystem
+ * is powered down. There is no client using the
+ * resource actively.
+ * RPMH_WAKE_ONLY_STATE: Resume resource state to the value previously
+ * requested before the processor was powered down.
+ * RPMH_ACTIVE_ONLY_STATE: Active or AMC mode requests. Resource state
+ * is aggregated immediately.
+ */
+enum rpmh_state {
+ RPMH_SLEEP_STATE,
+ RPMH_WAKE_ONLY_STATE,
+ RPMH_ACTIVE_ONLY_STATE,
+};
+
+/**
+ * struct tcs_cmd: an individual request to RPMH.
+ *
+ * @addr: the address of the resource slv_id:18:16 | offset:0:15
+ * @data: the resource state request
+ * @wait: ensure that this command is complete before returning.
+ * Setting "wait" here only makes sense during rpmh_write_batch() for
+ * active-only transfers, this is because:
+ * rpmh_write() - Always waits.
+ * (DEFINE_RPMH_MSG_ONSTACK will set .wait_for_compl)
+ * rpmh_write_async() - Never waits.
+ * (There's no request completion callback)
+ */
+struct tcs_cmd {
+ u32 addr;
+ u32 data;
+ u32 wait;
+};
+
+/**
+ * struct tcs_request: A set of tcs_cmds sent together in a TCS
+ *
+ * @state: state for the request.
+ * @wait_for_compl: wait until we get a response from the h/w accelerator
+ * (same as setting cmd->wait for all commands in the request)
+ * @num_cmds: the number of @cmds in this request
+ * @cmds: an array of tcs_cmds
+ */
+struct tcs_request {
+ enum rpmh_state state;
+ u32 wait_for_compl;
+ u32 num_cmds;
+ struct tcs_cmd *cmds;
+};
+
+#define BCM_TCS_CMD_COMMIT_SHFT 30
+#define BCM_TCS_CMD_COMMIT_MASK 0x40000000
+#define BCM_TCS_CMD_VALID_SHFT 29
+#define BCM_TCS_CMD_VALID_MASK 0x20000000
+#define BCM_TCS_CMD_VOTE_X_SHFT 14
+#define BCM_TCS_CMD_VOTE_MASK 0x3fff
+#define BCM_TCS_CMD_VOTE_Y_SHFT 0
+#define BCM_TCS_CMD_VOTE_Y_MASK 0xfffc000
+
+/* Construct a Bus Clock Manager (BCM) specific TCS command */
+#define BCM_TCS_CMD(commit, valid, vote_x, vote_y) \
+ (((commit) << BCM_TCS_CMD_COMMIT_SHFT) | \
+ ((valid) << BCM_TCS_CMD_VALID_SHFT) | \
+ ((cpu_to_le32(vote_x) & \
+ BCM_TCS_CMD_VOTE_MASK) << BCM_TCS_CMD_VOTE_X_SHFT) | \
+ ((cpu_to_le32(vote_y) & \
+ BCM_TCS_CMD_VOTE_MASK) << BCM_TCS_CMD_VOTE_Y_SHFT))
+
+#endif /* __SOC_QCOM_TCS_H__ */