ata: dwc_ahsata: Add ahci driver model support

Disable this support for cm_fx6 to avoid breakage.

Signed-off-by: Soeren Moch <smoch@web.de>
diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig
index 6156ac2..2178170 100644
--- a/configs/cm_fx6_defconfig
+++ b/configs/cm_fx6_defconfig
@@ -51,6 +51,7 @@
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_DWC_AHSATA=y
+# CONFIG_DWC_AHSATA_AHCI is not set
 CONFIG_DM_KEYBOARD=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 7ebee75..593e9cb 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -66,6 +66,14 @@
 	  Enable this driver to support the DWC AHSATA SATA controller found
 	  in i.MX5 and i.MX6 SoCs.
 
+config DWC_AHSATA_AHCI
+	bool "Enable DWC AHSATA AHCI driver support"
+	depends on DWC_AHSATA
+	depends on AHCI
+	default y
+	help
+	  Enable this option unless you need your private ahci implementation
+
 config FSL_SATA
 	bool "Enable Freescale SATA controller driver support"
 	select LIBATA
diff --git a/drivers/ata/dwc_ahsata.c b/drivers/ata/dwc_ahsata.c
index 6fe5641..afced8e 100644
--- a/drivers/ata/dwc_ahsata.c
+++ b/drivers/ata/dwc_ahsata.c
@@ -16,6 +16,7 @@
 #include <asm/io.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/sata.h>
 #include <linux/bitops.h>
 #include <linux/ctype.h>
 #include <linux/errno.h>
@@ -1020,6 +1021,9 @@
 	struct ahci_uc_priv *uc_priv = dev_get_uclass_priv(dev);
 	int ret;
 
+#if defined(CONFIG_MX6)
+	setup_sata();
+#endif
 	uc_priv->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 			ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | ATA_FLAG_NO_ATAPI;
 	uc_priv->mmio_base = (void __iomem *)dev_read_addr(dev);
@@ -1067,4 +1071,24 @@
 	.ops		= &dwc_ahsata_blk_ops,
 };
 
+#if CONFIG_IS_ENABLED(DWC_AHSATA_AHCI)
+struct ahci_ops dwc_ahsata_ahci_ops = {
+	.port_status = dwc_ahsata_port_status,
+	.reset       = dwc_ahsata_bus_reset,
+	.scan        = dwc_ahsata_scan,
+};
+
+static const struct udevice_id dwc_ahsata_ahci_ids[] = {
+	{ .compatible = "fsl,imx6q-ahci" },
+	{ }
+};
+
+U_BOOT_DRIVER(dwc_ahsata_ahci) = {
+	.name     = "dwc_ahsata_ahci",
+	.id       = UCLASS_AHCI,
+	.of_match = dwc_ahsata_ahci_ids,
+	.ops      = &dwc_ahsata_ahci_ops,
+	.probe    = dwc_ahsata_probe,
+};
+#endif
 #endif