lib/libfdt/: General aesthetic/style fixes.
A number of style fixes across the files in this directory, including:
* Correct invalid kernel-doc content.
* Tidy up massive comment in fdt_region.c.
* Use correct spelling of "U-Boot".
* Replace tests of "! <var>" with "!<var>".
* Replace "libfdt_env.h" with <libfdt_env.h>.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Acked-by: Simon Glass <sjg@chromium.org>
diff --git a/lib/libfdt/Makefile b/lib/libfdt/Makefile
index 934d614..8b86c15 100644
--- a/lib/libfdt/Makefile
+++ b/lib/libfdt/Makefile
@@ -5,5 +5,13 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y += fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_sw.o fdt_wip.o \
- fdt_empty_tree.o fdt_addresses.o fdt_region.o
+obj-y += \
+ fdt.o \
+ fdt_ro.o \
+ fdt_rw.o \
+ fdt_strerror.o \
+ fdt_sw.o \
+ fdt_wip.o \
+ fdt_empty_tree.o \
+ fdt_addresses.o \
+ fdt_region.o
diff --git a/lib/libfdt/README b/lib/libfdt/README
index e059876..db40ab2 100644
--- a/lib/libfdt/README
+++ b/lib/libfdt/README
@@ -1,5 +1,5 @@
The libfdt functionality was written by David Gibson. The original
-source came from the git repository:
+source came from the Git repository:
URL: git://ozlabs.org/home/dgibson/git/libfdt.git
@@ -11,13 +11,15 @@
tree 2f648f0f88225a51ded452968d28b4402df8ade0
parent 07a12a08005f3b5cd9337900a6551e450c07b515
-To adapt for u-boot usage, only the applicable files were copied and
-imported into the u-boot git repository.
+To adapt for U-Boot usage, only the applicable files were copied and
+imported into the U-Boot Git repository.
+
Omitted:
-* GPL - u-boot comes with a copy of the GPL license
-* test subdirectory - not directly useful for u-boot
+
+ * GPL - U-Boot comes with a copy of the GPL license
+ * test subdirectory - not directly useful for U-Boot
-After importing, other customizations were performed. See the git log
-for details.
+After importing, other customizations were performed. See the
+"git log" for details.
Jerry Van Baren
diff --git a/lib/libfdt/fdt.c b/lib/libfdt/fdt.c
index e146aba..96017a1 100644
--- a/lib/libfdt/fdt.c
+++ b/lib/libfdt/fdt.c
@@ -3,7 +3,7 @@
* Copyright (C) 2006 David Gibson, IBM Corporation.
* SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause
*/
-#include "libfdt_env.h"
+#include <libfdt_env.h>
#ifndef USE_HOSTCC
#include <fdt.h>
diff --git a/lib/libfdt/fdt_addresses.c b/lib/libfdt/fdt_addresses.c
index 76054d9..b6bc66e 100644
--- a/lib/libfdt/fdt_addresses.c
+++ b/lib/libfdt/fdt_addresses.c
@@ -3,7 +3,7 @@
* Copyright (C) 2014 David Gibson <david@gibson.dropbear.id.au>
* SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause
*/
-#include "libfdt_env.h"
+#include <libfdt_env.h>
#ifndef USE_HOSTCC
#include <fdt.h>
diff --git a/lib/libfdt/fdt_empty_tree.c b/lib/libfdt/fdt_empty_tree.c
index 34f1c84..6fde1eb 100644
--- a/lib/libfdt/fdt_empty_tree.c
+++ b/lib/libfdt/fdt_empty_tree.c
@@ -3,8 +3,7 @@
* Copyright (C) 2012 David Gibson, IBM Corporation.
* SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause
*/
-#include "libfdt_env.h"
-
+#include <libfdt_env.h>
#include <fdt.h>
#include <libfdt.h>
diff --git a/lib/libfdt/fdt_region.c b/lib/libfdt/fdt_region.c
index 747d8bb..d2ce4c1 100644
--- a/lib/libfdt/fdt_region.c
+++ b/lib/libfdt/fdt_region.c
@@ -5,7 +5,7 @@
* SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause
*/
-#include "libfdt_env.h"
+#include <libfdt_env.h>
#ifndef USE_HOSTCC
#include <fdt.h>
@@ -18,14 +18,13 @@
/**
* fdt_add_region() - Add a new region to our list
+ * @info: State information
+ * @offset: Start offset of region
+ * @size: Size of region
*
* The region is added if there is space, but in any case we increment the
* count. If permitted, and the new region overlaps the last one, we merge
* them.
- *
- * @info: State information
- * @offset: Start offset of region
- * @size: Size of region
*/
static int fdt_add_region(struct fdt_region_state *info, int offset, int size)
{
@@ -119,6 +118,8 @@
/**
* fdt_include_supernodes() - Include supernodes required by this node
+ * @info: State information
+ * @depth: Current stack depth
*
* When we decided to include a node or property which is not at the top
* level, this function forces the inclusion of higher level nodes. For
@@ -131,9 +132,6 @@
*
* If we decide to include testing then we need the root node to have a valid
* tree. This function adds those regions.
- *
- * @info: State information
- * @depth: Current stack depth
*/
static int fdt_include_supernodes(struct fdt_region_state *info, int depth)
{
@@ -203,72 +201,78 @@
path, path_len, flags, info);
}
-/*
- * Theory of operation
+/***********************************************************************
*
+ * Theory of operation
*
+ * Note: in this description 'included' means that a node (or other part
+ * of the tree) should be included in the region list, i.e. it will have
+ * a region which covers its part of the tree.
*
-
-Note: in this description 'included' means that a node (or other part of
-the tree) should be included in the region list, i.e. it will have a region
-which covers its part of the tree.
-
-This function maintains some state from the last time it is called. It
-checks the next part of the tree that it is supposed to look at
-(p.nextoffset) to see if that should be included or not. When it finds
-something to include, it sets info->start to its offset. This marks the
-start of the region we want to include.
-
-Once info->start is set to the start (i.e. not -1), we continue scanning
-until we find something that we don't want included. This will be the end
-of a region. At this point we can close off the region and add it to the
-list. So we do so, and reset info->start to -1.
-
-One complication here is that we want to merge regions. So when we come to
-add another region later, we may in fact merge it with the previous one if
-one ends where the other starts.
-
-The function fdt_add_region() will return -1 if it fails to add the region,
-because we already have a region ready to be returned, and the new one
-cannot be merged in with it. In this case, we must return the region we
-found, and wait for another call to this function. When it comes, we will
-repeat the processing of the tag and again try to add a region. This time it
-will succeed.
-
-The current state of the pointers (stack, offset, etc.) is maintained in
-a ptrs member. At the start of every loop iteration we make a copy of it.
-The copy is then updated as the tag is processed. Only if we get to the end
-of the loop iteration (and successfully call fdt_add_region() if we need
-to) can we commit the changes we have made to these pointers. For example,
-if we see an FDT_END_NODE tag we will decrement the depth value. But if we
-need to add a region for this tag (let's say because the previous tag is
-included and this FDT_END_NODE tag is not included) then we will only commit
-the result if we were able to add the region. That allows us to retry again
-next time.
-
-We keep track of a variable called 'want' which tells us what we want to
-include when there is no specific information provided by the h_include
-function for a particular property. This basically handles the inclusion of
-properties which are pulled in by virtue of the node they are in. So if you
-include a node, its properties are also included. In this case 'want' will
-be WANT_NODES_AND_PROPS. The FDT_REG_DIRECT_SUBNODES feature also makes use
-of 'want'. While we are inside the subnode, 'want' will be set to
-WANT_NODES_ONLY, so that only the subnode's FDT_BEGIN_NODE and FDT_END_NODE
-tags will be included, and properties will be skipped. If WANT_NOTHING is
-selected, then we will just rely on what the h_include() function tells us.
-
-Using 'want' we work out 'include', which tells us whether this current tag
-should be included or not. As you can imagine, if the value of 'include'
-changes, that means we are on a boundary between nodes to include and nodes
-to exclude. At this point we either close off a previous region and add it
-to the list, or mark the start of a new region.
+ * This function maintains some state from the last time it is called.
+ * It checks the next part of the tree that it is supposed to look at
+ * (p.nextoffset) to see if that should be included or not. When it
+ * finds something to include, it sets info->start to its offset. This
+ * marks the start of the region we want to include.
+ *
+ * Once info->start is set to the start (i.e. not -1), we continue
+ * scanning until we find something that we don't want included. This
+ * will be the end of a region. At this point we can close off the
+ * region and add it to the list. So we do so, and reset info->start
+ * to -1.
+ *
+ * One complication here is that we want to merge regions. So when we
+ * come to add another region later, we may in fact merge it with the
+ * previous one if one ends where the other starts.
+ *
+ * The function fdt_add_region() will return -1 if it fails to add the
+ * region, because we already have a region ready to be returned, and
+ * the new one cannot be merged in with it. In this case, we must return
+ * the region we found, and wait for another call to this function.
+ * When it comes, we will repeat the processing of the tag and again
+ * try to add a region. This time it will succeed.
+ *
+ * The current state of the pointers (stack, offset, etc.) is maintained
+ * in a ptrs member. At the start of every loop iteration we make a copy
+ * of it. The copy is then updated as the tag is processed. Only if we
+ * get to the end of the loop iteration (and successfully call
+ * fdt_add_region() if we need to) can we commit the changes we have
+ * made to these pointers. For example, if we see an FDT_END_NODE tag,
+ * we will decrement the depth value. But if we need to add a region
+ * for this tag (let's say because the previous tag is included and this
+ * FDT_END_NODE tag is not included) then we will only commit the result
+ * if we were able to add the region. That allows us to retry again next
+ * time.
+ *
+ * We keep track of a variable called 'want' which tells us what we want
+ * to include when there is no specific information provided by the
+ * h_include function for a particular property. This basically handles
+ * the inclusion of properties which are pulled in by virtue of the node
+ * they are in. So if you include a node, its properties are also
+ * included. In this case 'want' will be WANT_NODES_AND_PROPS. The
+ * FDT_REG_DIRECT_SUBNODES feature also makes use of 'want'. While we
+ * are inside the subnode, 'want' will be set to WANT_NODES_ONLY, so
+ * that only the subnode's FDT_BEGIN_NODE and FDT_END_NODE tags will be
+ * included, and properties will be skipped. If WANT_NOTHING is
+ * selected, then we will just rely on what the h_include() function
+ * tells us.
+ *
+ * Using 'want' we work out 'include', which tells us whether this
+ * current tag should be included or not. As you can imagine, if the
+ * value of 'include' changes, that means we are on a boundary between
+ * nodes to include and nodes to exclude. At this point we either close
+ * off a previous region and add it to the list, or mark the start of a
+ * new region.
+ *
+ * Apart from the nodes, we have mem_rsvmap, the FDT_END tag and the
+ * string list. Each of these dealt with as a whole (i.e. we create a
+ * region for each if it is to be included). For mem_rsvmap we don't
+ * allow it to merge with the first struct region. For the stringlist,
+ * we don't allow it to merge with the last struct region (which
+ * contains at minimum the FDT_END tag).
+ *
+ *********************************************************************/
-Apart from the nodes, we have mem_rsvmap, the FDT_END tag and the string
-list. Each of these dealt with as a whole (i.e. we create a region for each
-if it is to be included). For mem_rsvmap we don't allow it to merge with
-the first struct region. For the stringlist we don't allow it to merge with
-the last struct region (which contains at minimum the FDT_END tag).
-*/
int fdt_next_region(const void *fdt,
int (*h_include)(void *priv, const void *fdt, int offset,
int type, const char *data, int size),
diff --git a/lib/libfdt/fdt_ro.c b/lib/libfdt/fdt_ro.c
index 7b0777b..12214c2 100644
--- a/lib/libfdt/fdt_ro.c
+++ b/lib/libfdt/fdt_ro.c
@@ -3,7 +3,7 @@
* Copyright (C) 2006 David Gibson, IBM Corporation.
* SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause
*/
-#include "libfdt_env.h"
+#include <libfdt_env.h>
#ifndef USE_HOSTCC
#include <fdt.h>
@@ -19,7 +19,7 @@
{
const char *p = fdt_offset_ptr(fdt, offset + FDT_TAGSIZE, len+1);
- if (! p)
+ if (!p)
/* short match */
return 0;
@@ -115,7 +115,7 @@
/*
* Find the next of path seperator, note we need to search for both '/' and ':'
- * and then take the first one so that we do the rigth thing for e.g.
+ * and then take the first one so that we do the right thing for e.g.
* "foo/bar:option" and "bar:option/otheroption", both of which happen, so
* first searching for either ':' or '/' does not work.
*/
@@ -163,7 +163,7 @@
if (*p == '\0' || *p == ':')
return offset;
q = fdt_path_next_seperator(p);
- if (! q)
+ if (!q)
q = end;
offset = fdt_subnode_offset_namelen(fdt, offset, p, q-p);
@@ -273,7 +273,7 @@
const struct fdt_property *prop;
prop = fdt_get_property_namelen(fdt, nodeoffset, name, namelen, lenp);
- if (! prop)
+ if (!prop)
return NULL;
return prop->data;
diff --git a/lib/libfdt/fdt_rw.c b/lib/libfdt/fdt_rw.c
index 1a358a8..e7321cc 100644
--- a/lib/libfdt/fdt_rw.c
+++ b/lib/libfdt/fdt_rw.c
@@ -3,7 +3,7 @@
* Copyright (C) 2006 David Gibson, IBM Corporation.
* SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause
*/
-#include "libfdt_env.h"
+#include <libfdt_env.h>
#ifndef USE_HOSTCC
#include <fdt.h>
@@ -168,7 +168,7 @@
int err;
*prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen);
- if (! (*prop))
+ if (!(*prop))
return oldlen;
if ((err = _fdt_splice_struct(fdt, (*prop)->data, FDT_TAGALIGN(oldlen),
@@ -283,7 +283,7 @@
FDT_RW_CHECK_HEADER(fdt);
prop = fdt_get_property_w(fdt, nodeoffset, name, &len);
- if (! prop)
+ if (!prop)
return len;
proplen = sizeof(*prop) + FDT_TAGALIGN(len);
diff --git a/lib/libfdt/fdt_strerror.c b/lib/libfdt/fdt_strerror.c
index 2f3cc24..3b7e168 100644
--- a/lib/libfdt/fdt_strerror.c
+++ b/lib/libfdt/fdt_strerror.c
@@ -3,7 +3,7 @@
* Copyright (C) 2006 David Gibson, IBM Corporation.
* SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause
*/
-#include "libfdt_env.h"
+#include <libfdt_env.h>
#ifndef USE_HOSTCC
#include <fdt.h>
diff --git a/lib/libfdt/fdt_sw.c b/lib/libfdt/fdt_sw.c
index 345a3ac..70fd026 100644
--- a/lib/libfdt/fdt_sw.c
+++ b/lib/libfdt/fdt_sw.c
@@ -3,8 +3,7 @@
* Copyright (C) 2006 David Gibson, IBM Corporation.
* SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause
*/
-#include "libfdt_env.h"
-
+#include <libfdt_env.h>
#include <fdt.h>
#include <libfdt.h>
diff --git a/lib/libfdt/fdt_wip.c b/lib/libfdt/fdt_wip.c
index 3f2dfa5..9fe9886 100644
--- a/lib/libfdt/fdt_wip.c
+++ b/lib/libfdt/fdt_wip.c
@@ -3,7 +3,7 @@
* Copyright (C) 2006 David Gibson, IBM Corporation.
* SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause
*/
-#include "libfdt_env.h"
+#include <libfdt_env.h>
#ifndef USE_HOSTCC
#include <fdt.h>
@@ -21,7 +21,7 @@
int proplen;
propval = fdt_getprop_w(fdt, nodeoffset, name, &proplen);
- if (! propval)
+ if (!propval)
return proplen;
if (proplen != len)
@@ -45,7 +45,7 @@
int len;
prop = fdt_get_property_w(fdt, nodeoffset, name, &len);
- if (! prop)
+ if (!prop)
return len;
_fdt_nop_region(prop, len + sizeof(*prop));