Patch by Travis Sawyer, 30 Dec 2003:
Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
select MDI port based on enabled EMAC device.
Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
base PrPMC board.
diff --git a/include/ppc440.h b/include/ppc440.h
index 76930a5..6eb33f1 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -1,148 +1,210 @@
/*----------------------------------------------------------------------------+
|
-| This source code has been made available to you by IBM on an AS-IS
-| basis. Anyone receiving this source is licensed under IBM
-| copyrights to use it in any way he or she deems fit, including
-| copying it, modifying it, compiling it, and redistributing it either
-| with or without modifications. No license under IBM patents or
-| patent applications is to be implied by the copyright license.
+| This source code has been made available to you by IBM on an AS-IS
+| basis. Anyone receiving this source is licensed under IBM
+| copyrights to use it in any way he or she deems fit, including
+| copying it, modifying it, compiling it, and redistributing it either
+| with or without modifications. No license under IBM patents or
+| patent applications is to be implied by the copyright license.
|
-| Any user of this software should understand that IBM cannot provide
-| technical support for this software and will not be responsible for
-| any consequences resulting from the use of this software.
+| Any user of this software should understand that IBM cannot provide
+| technical support for this software and will not be responsible for
+| any consequences resulting from the use of this software.
|
-| Any person who transfers this source code or any derivative work
-| must include the IBM copyright notice, this paragraph, and the
-| preceding two paragraphs in the transferred software.
+| Any person who transfers this source code or any derivative work
+| must include the IBM copyright notice, this paragraph, and the
+| preceding two paragraphs in the transferred software.
|
-| COPYRIGHT I B M CORPORATION 1999
-| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+| COPYRIGHT I B M CORPORATION 1999
+| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+----------------------------------------------------------------------------*/
-#ifndef __PPC440_H__
+#ifndef __PPC440_H__
#define __PPC440_H__
/*--------------------------------------------------------------------- */
/* Special Purpose Registers */
/*--------------------------------------------------------------------- */
- #define dec 0x016 /* decrementer */
- #define srr0 0x01a /* save/restore register 0 */
- #define srr1 0x01b /* save/restore register 1 */
- #define pid 0x030 /* process id */
- #define decar 0x036 /* decrementer auto-reload */
- #define csrr0 0x03a /* critical save/restore register 0 */
- #define csrr1 0x03b /* critical save/restore register 1 */
- #define dear 0x03d /* data exception address register */
- #define esr 0x03e /* exception syndrome register */
- #define ivpr 0x03f /* interrupt prefix register */
- #define usprg0 0x100 /* user special purpose register general 0 */
- #define usprg1 0x110 /* user special purpose register general 1 */
- #define sprg1 0x111 /* special purpose register general 1 */
- #define sprg2 0x112 /* special purpose register general 2 */
- #define sprg3 0x113 /* special purpose register general 3 */
- #define sprg4 0x114 /* special purpose register general 4 */
- #define sprg5 0x115 /* special purpose register general 5 */
- #define sprg6 0x116 /* special purpose register general 6 */
- #define sprg7 0x117 /* special purpose register general 7 */
- #define tbl 0x11c /* time base lower (supervisor)*/
- #define tbu 0x11d /* time base upper (supervisor)*/
- #define pir 0x11e /* processor id register */
- /*#define pvr 0x11f processor version register */
- #define dbsr 0x130 /* debug status register */
- #define dbcr0 0x134 /* debug control register 0 */
- #define dbcr1 0x135 /* debug control register 1 */
- #define dbcr2 0x136 /* debug control register 2 */
- #define iac1 0x138 /* instruction address compare 1 */
- #define iac2 0x139 /* instruction address compare 2 */
- #define iac3 0x13a /* instruction address compare 3 */
- #define iac4 0x13b /* instruction address compare 4 */
- #define dac1 0x13c /* data address compare 1 */
- #define dac2 0x13d /* data address compare 2 */
- #define dvc1 0x13e /* data value compare 1 */
- #define dvc2 0x13f /* data value compare 2 */
- #define tsr 0x150 /* timer status register */
- #define tcr 0x154 /* timer control register */
- #define ivor0 0x190 /* interrupt vector offset register 0 */
- #define ivor1 0x191 /* interrupt vector offset register 1 */
- #define ivor2 0x192 /* interrupt vector offset register 2 */
- #define ivor3 0x193 /* interrupt vector offset register 3 */
- #define ivor4 0x194 /* interrupt vector offset register 4 */
- #define ivor5 0x195 /* interrupt vector offset register 5 */
- #define ivor6 0x196 /* interrupt vector offset register 6 */
- #define ivor7 0x197 /* interrupt vector offset register 7 */
- #define ivor8 0x198 /* interrupt vector offset register 8 */
- #define ivor9 0x199 /* interrupt vector offset register 9 */
- #define ivor10 0x19a /* interrupt vector offset register 10 */
- #define ivor11 0x19b /* interrupt vector offset register 11 */
- #define ivor12 0x19c /* interrupt vector offset register 12 */
- #define ivor13 0x19d /* interrupt vector offset register 13 */
- #define ivor14 0x19e /* interrupt vector offset register 14 */
- #define ivor15 0x19f /* interrupt vector offset register 15 */
- #define inv0 0x370 /* instruction cache normal victim 0 */
- #define inv1 0x371 /* instruction cache normal victim 1 */
- #define inv2 0x372 /* instruction cache normal victim 2 */
- #define inv3 0x373 /* instruction cache normal victim 3 */
- #define itv0 0x374 /* instruction cache transient victim 0 */
- #define itv1 0x375 /* instruction cache transient victim 1 */
- #define itv2 0x376 /* instruction cache transient victim 2 */
- #define itv3 0x377 /* instruction cache transient victim 3 */
- #define dnv0 0x390 /* data cache normal victim 0 */
- #define dnv1 0x391 /* data cache normal victim 1 */
- #define dnv2 0x392 /* data cache normal victim 2 */
- #define dnv3 0x393 /* data cache normal victim 3 */
- #define dtv0 0x394 /* data cache transient victim 0 */
- #define dtv1 0x395 /* data cache transient victim 1 */
- #define dtv2 0x396 /* data cache transient victim 2 */
- #define dtv3 0x397 /* data cache transient victim 3 */
- #define dvlim 0x398 /* data cache victim limit */
- #define ivlim 0x399 /* instruction cache victim limit */
- #define rstcfg 0x39b /* reset configuration */
- #define dcdbtrl 0x39c /* data cache debug tag register low */
- #define dcdbtrh 0x39d /* data cache debug tag register high */
- #define icdbtrl 0x39e /* instruction cache debug tag register low */
- #define icdbtrh 0x39f /* instruction cache debug tag register high */
- #define mmucr 0x3b2 /* mmu control register */
- #define ccr0 0x3b3 /* core configuration register 0 */
- #define icdbdr 0x3d3 /* instruction cache debug data register */
- #define dbdr 0x3f3 /* debug data register */
+#define dec 0x016 /* decrementer */
+#define srr0 0x01a /* save/restore register 0 */
+#define srr1 0x01b /* save/restore register 1 */
+#define pid 0x030 /* process id */
+#define decar 0x036 /* decrementer auto-reload */
+#define csrr0 0x03a /* critical save/restore register 0 */
+#define csrr1 0x03b /* critical save/restore register 1 */
+#define dear 0x03d /* data exception address register */
+#define esr 0x03e /* exception syndrome register */
+#define ivpr 0x03f /* interrupt prefix register */
+#define usprg0 0x100 /* user special purpose register general 0 */
+#define usprg1 0x110 /* user special purpose register general 1 */
+#define sprg1 0x111 /* special purpose register general 1 */
+#define sprg2 0x112 /* special purpose register general 2 */
+#define sprg3 0x113 /* special purpose register general 3 */
+#define sprg4 0x114 /* special purpose register general 4 */
+#define sprg5 0x115 /* special purpose register general 5 */
+#define sprg6 0x116 /* special purpose register general 6 */
+#define sprg7 0x117 /* special purpose register general 7 */
+#define tbl 0x11c /* time base lower (supervisor)*/
+#define tbu 0x11d /* time base upper (supervisor)*/
+#define pir 0x11e /* processor id register */
+/*#define pvr 0x11f processor version register */
+#define dbsr 0x130 /* debug status register */
+#define dbcr0 0x134 /* debug control register 0 */
+#define dbcr1 0x135 /* debug control register 1 */
+#define dbcr2 0x136 /* debug control register 2 */
+#define iac1 0x138 /* instruction address compare 1 */
+#define iac2 0x139 /* instruction address compare 2 */
+#define iac3 0x13a /* instruction address compare 3 */
+#define iac4 0x13b /* instruction address compare 4 */
+#define dac1 0x13c /* data address compare 1 */
+#define dac2 0x13d /* data address compare 2 */
+#define dvc1 0x13e /* data value compare 1 */
+#define dvc2 0x13f /* data value compare 2 */
+#define tsr 0x150 /* timer status register */
+#define tcr 0x154 /* timer control register */
+#define ivor0 0x190 /* interrupt vector offset register 0 */
+#define ivor1 0x191 /* interrupt vector offset register 1 */
+#define ivor2 0x192 /* interrupt vector offset register 2 */
+#define ivor3 0x193 /* interrupt vector offset register 3 */
+#define ivor4 0x194 /* interrupt vector offset register 4 */
+#define ivor5 0x195 /* interrupt vector offset register 5 */
+#define ivor6 0x196 /* interrupt vector offset register 6 */
+#define ivor7 0x197 /* interrupt vector offset register 7 */
+#define ivor8 0x198 /* interrupt vector offset register 8 */
+#define ivor9 0x199 /* interrupt vector offset register 9 */
+#define ivor10 0x19a /* interrupt vector offset register 10 */
+#define ivor11 0x19b /* interrupt vector offset register 11 */
+#define ivor12 0x19c /* interrupt vector offset register 12 */
+#define ivor13 0x19d /* interrupt vector offset register 13 */
+#define ivor14 0x19e /* interrupt vector offset register 14 */
+#define ivor15 0x19f /* interrupt vector offset register 15 */
+#if defined(CONFIG_440_GX)
+#define mcsrr0 0x23a /* machine check save/restore register 0 */
+#define mcsrr1 0x23b /* mahcine check save/restore register 1 */
+#define mcsr 0x23c /* machine check status register */
+#endif
+#define inv0 0x370 /* instruction cache normal victim 0 */
+#define inv1 0x371 /* instruction cache normal victim 1 */
+#define inv2 0x372 /* instruction cache normal victim 2 */
+#define inv3 0x373 /* instruction cache normal victim 3 */
+#define itv0 0x374 /* instruction cache transient victim 0 */
+#define itv1 0x375 /* instruction cache transient victim 1 */
+#define itv2 0x376 /* instruction cache transient victim 2 */
+#define itv3 0x377 /* instruction cache transient victim 3 */
+#define dnv0 0x390 /* data cache normal victim 0 */
+#define dnv1 0x391 /* data cache normal victim 1 */
+#define dnv2 0x392 /* data cache normal victim 2 */
+#define dnv3 0x393 /* data cache normal victim 3 */
+#define dtv0 0x394 /* data cache transient victim 0 */
+#define dtv1 0x395 /* data cache transient victim 1 */
+#define dtv2 0x396 /* data cache transient victim 2 */
+#define dtv3 0x397 /* data cache transient victim 3 */
+#define dvlim 0x398 /* data cache victim limit */
+#define ivlim 0x399 /* instruction cache victim limit */
+#define rstcfg 0x39b /* reset configuration */
+#define dcdbtrl 0x39c /* data cache debug tag register low */
+#define dcdbtrh 0x39d /* data cache debug tag register high */
+#define icdbtrl 0x39e /* instruction cache debug tag register low */
+#define icdbtrh 0x39f /* instruction cache debug tag register high */
+#define mmucr 0x3b2 /* mmu control register */
+#define ccr0 0x3b3 /* core configuration register 0 */
+#define icdbdr 0x3d3 /* instruction cache debug data register */
+#define dbdr 0x3f3 /* debug data register */
/******************************************************************************
* DCRs & Related
******************************************************************************/
/*-----------------------------------------------------------------------------
+ | Clocking Controller
+ +----------------------------------------------------------------------------*/
+#define CLOCKING_DCR_BASE 0x0c
+#define clkcfga (CLOCKING_DCR_BASE+0x0)
+#define clkcfgd (CLOCKING_DCR_BASE+0x1)
+
+/* values for clkcfga register - indirect addressing of these regs */
+#define clk_clkukpd 0x0020
+#define clk_pllc 0x0040
+#define clk_plld 0x0060
+#define clk_primad 0x0080
+#define clk_primbd 0x00a0
+#define clk_opbd 0x00c0
+#define clk_perd 0x00e0
+#define clk_mald 0x0100
+#define clk_icfg 0x0140
+
+/* 440gx sdr register definations */
+#define SDR_DCR_BASE 0x0e
+#define sdrcfga (SDR_DCR_BASE+0x0)
+#define sdrcfgd (SDR_DCR_BASE+0x1)
+#define sdr_sdstp0 0x0020 /* */
+#define sdr_sdstp1 0x0021 /* */
+#define sdr_pinstp 0x0040
+#define sdr_sdcs 0x0060
+#define sdr_ecid0 0x0080
+#define sdr_ecid1 0x0081
+#define sdr_ecid2 0x0082
+#define sdr_jtag 0x00c0
+#define sdr_ddrdl 0x00e0
+#define sdr_ebc 0x0100
+#define sdr_uart0 0x0120 /* UART0 Config */
+#define sdr_uart1 0x0121 /* UART1 Config */
+#define sdr_cp440 0x0180
+#define sdr_xcr 0x01c0
+#define sdr_xpllc 0x01c1
+#define sdr_xplld 0x01c2
+#define sdr_srst 0x0200
+#define sdr_slpipe 0x0220
+#define sdr_amp 0x0240
+#define sdr_mirq0 0x0260
+#define sdr_mirq1 0x0261
+#define sdr_maltbl 0x0280
+#define sdr_malrbl 0x02a0
+#define sdr_maltbs 0x02c0
+#define sdr_malrbs 0x02e0
+#define sdr_cust0 0x4000
+#define sdr_sdstp2 0x4001
+#define sdr_cust1 0x4002
+#define sdr_sdstp3 0x4003
+#define sdr_pfc0 0x4100 /* Pin Function 0 */
+#define sdr_pfc1 0x4101 /* Pin Function 1 */
+#define sdr_plbtr 0x4200
+#define sdr_mfr 0x4300 /* SDR0_MFR reg */
+
+
+/*-----------------------------------------------------------------------------
| SDRAM Controller
+----------------------------------------------------------------------------*/
#define SDRAM_DCR_BASE 0x10
-#define memcfga (SDRAM_DCR_BASE+0x0) /* Memory configuration address reg */
-#define memcfgd (SDRAM_DCR_BASE+0x1) /* Memory configuration data reg */
+#define memcfga (SDRAM_DCR_BASE+0x0) /* Memory configuration address reg */
+#define memcfgd (SDRAM_DCR_BASE+0x1) /* Memory configuration data reg */
- /* values for memcfga register - indirect addressing of these regs */
- #define mem_besr0_clr 0x0000 /* bus error status reg 0 (clr) */
- #define mem_besr0_set 0x0004 /* bus error status reg 0 (set) */
- #define mem_besr1_clr 0x0008 /* bus error status reg 1 (clr) */
- #define mem_besr1_set 0x000c /* bus error status reg 1 (set) */
- #define mem_bear 0x0010 /* bus error address reg */
- #define mem_mirq_clr 0x0011 /* bus master interrupt (clr) */
- #define mem_mirq_set 0x0012 /* bus master interrupt (set) */
- #define mem_slio 0x0018 /* ddr sdram slave interface options */
- #define mem_cfg0 0x0020 /* ddr sdram options 0 */
- #define mem_cfg1 0x0021 /* ddr sdram options 1 */
- #define mem_devopt 0x0022 /* ddr sdram device options */
- #define mem_mcsts 0x0024 /* memory controller status */
- #define mem_rtr 0x0030 /* refresh timer register */
- #define mem_pmit 0x0034 /* power management idle timer */
- #define mem_uabba 0x0038 /* plb UABus base address */
- #define mem_b0cr 0x0040 /* ddr sdram bank 0 configuration */
- #define mem_b1cr 0x0044 /* ddr sdram bank 1 configuration */
- #define mem_b2cr 0x0048 /* ddr sdram bank 2 configuration */
- #define mem_b3cr 0x004c /* ddr sdram bank 3 configuration */
- #define mem_tr0 0x0080 /* sdram timing register 0 */
- #define mem_tr1 0x0081 /* sdram timing register 1 */
- #define mem_clktr 0x0082 /* ddr clock timing register */
- #define mem_wddctr 0x0083 /* write data/dm/dqs clock timing reg */
- #define mem_dlycal 0x0084 /* delay line calibration register */
- #define mem_eccesr 0x0098 /* ECC error status */
+/* values for memcfga register - indirect addressing of these regs */
+#define mem_besr0_clr 0x0000 /* bus error status reg 0 (clr) */
+#define mem_besr0_set 0x0004 /* bus error status reg 0 (set) */
+#define mem_besr1_clr 0x0008 /* bus error status reg 1 (clr) */
+#define mem_besr1_set 0x000c /* bus error status reg 1 (set) */
+#define mem_bear 0x0010 /* bus error address reg */
+#define mem_mirq_clr 0x0011 /* bus master interrupt (clr) */
+#define mem_mirq_set 0x0012 /* bus master interrupt (set) */
+#define mem_slio 0x0018 /* ddr sdram slave interface options */
+#define mem_cfg0 0x0020 /* ddr sdram options 0 */
+#define mem_cfg1 0x0021 /* ddr sdram options 1 */
+#define mem_devopt 0x0022 /* ddr sdram device options */
+#define mem_mcsts 0x0024 /* memory controller status */
+#define mem_rtr 0x0030 /* refresh timer register */
+#define mem_pmit 0x0034 /* power management idle timer */
+#define mem_uabba 0x0038 /* plb UABus base address */
+#define mem_b0cr 0x0040 /* ddr sdram bank 0 configuration */
+#define mem_b1cr 0x0044 /* ddr sdram bank 1 configuration */
+#define mem_b2cr 0x0048 /* ddr sdram bank 2 configuration */
+#define mem_b3cr 0x004c /* ddr sdram bank 3 configuration */
+#define mem_tr0 0x0080 /* sdram timing register 0 */
+#define mem_tr1 0x0081 /* sdram timing register 1 */
+#define mem_clktr 0x0082 /* ddr clock timing register */
+#define mem_wddctr 0x0083 /* write data/dm/dqs clock timing reg */
+#define mem_dlycal 0x0084 /* delay line calibration register */
+#define mem_eccesr 0x0098 /* ECC error status */
/*-----------------------------------------------------------------------------
| Extrnal Bus Controller
@@ -150,45 +212,61 @@
#define EBC_DCR_BASE 0x12
#define ebccfga (EBC_DCR_BASE+0x0) /* External bus controller addr reg */
#define ebccfgd (EBC_DCR_BASE+0x1) /* External bus controller data reg */
- /* values for ebccfga register - indirect addressing of these regs */
- #define pb0cr 0x00 /* periph bank 0 config reg */
- #define pb1cr 0x01 /* periph bank 1 config reg */
- #define pb2cr 0x02 /* periph bank 2 config reg */
- #define pb3cr 0x03 /* periph bank 3 config reg */
- #define pb4cr 0x04 /* periph bank 4 config reg */
- #define pb5cr 0x05 /* periph bank 5 config reg */
- #define pb6cr 0x06 /* periph bank 6 config reg */
- #define pb7cr 0x07 /* periph bank 7 config reg */
- #define pb0ap 0x10 /* periph bank 0 access parameters */
- #define pb1ap 0x11 /* periph bank 1 access parameters */
- #define pb2ap 0x12 /* periph bank 2 access parameters */
- #define pb3ap 0x13 /* periph bank 3 access parameters */
- #define pb4ap 0x14 /* periph bank 4 access parameters */
- #define pb5ap 0x15 /* periph bank 5 access parameters */
- #define pb6ap 0x16 /* periph bank 6 access parameters */
- #define pb7ap 0x17 /* periph bank 7 access parameters */
- #define pbear 0x20 /* periph bus error addr reg */
- #define pbesr 0x21 /* periph bus error status reg */
- #define xbcfg 0x23 /* external bus configuration reg */
- #define xbcid 0x23 /* external bus core id reg */
+/* values for ebccfga register - indirect addressing of these regs */
+#define pb0cr 0x00 /* periph bank 0 config reg */
+#define pb1cr 0x01 /* periph bank 1 config reg */
+#define pb2cr 0x02 /* periph bank 2 config reg */
+#define pb3cr 0x03 /* periph bank 3 config reg */
+#define pb4cr 0x04 /* periph bank 4 config reg */
+#define pb5cr 0x05 /* periph bank 5 config reg */
+#define pb6cr 0x06 /* periph bank 6 config reg */
+#define pb7cr 0x07 /* periph bank 7 config reg */
+#define pb0ap 0x10 /* periph bank 0 access parameters */
+#define pb1ap 0x11 /* periph bank 1 access parameters */
+#define pb2ap 0x12 /* periph bank 2 access parameters */
+#define pb3ap 0x13 /* periph bank 3 access parameters */
+#define pb4ap 0x14 /* periph bank 4 access parameters */
+#define pb5ap 0x15 /* periph bank 5 access parameters */
+#define pb6ap 0x16 /* periph bank 6 access parameters */
+#define pb7ap 0x17 /* periph bank 7 access parameters */
+#define pbear 0x20 /* periph bus error addr reg */
+#define pbesr 0x21 /* periph bus error status reg */
+#define xbcfg 0x23 /* external bus configuration reg */
+#define xbcid 0x23 /* external bus core id reg */
/*-----------------------------------------------------------------------------
| Internal SRAM
+----------------------------------------------------------------------------*/
#define ISRAM0_DCR_BASE 0x020
-#define isram0_sb0cr (ISRAM0_DCR_BASE+0x00) /* SRAM bank config 0*/
-#define isram0_sb1cr (ISRAM0_DCR_BASE+0x01) /* SRAM bank config 1*/
-#define isram0_sb2cr (ISRAM0_DCR_BASE+0x02) /* SRAM bank config 2*/
-#define isram0_sb3cr (ISRAM0_DCR_BASE+0x03) /* SRAM bank config 3*/
-#define isram0_bear (ISRAM0_DCR_BASE+0x04) /* SRAM bus error addr reg */
-#define isram0_besr0 (ISRAM0_DCR_BASE+0x05) /* SRAM bus error status reg 0 */
-#define isram0_besr1 (ISRAM0_DCR_BASE+0x06) /* SRAM bus error status reg 1 */
-#define isram0_pmeg (ISRAM0_DCR_BASE+0x07) /* SRAM power management */
-#define isram0_cid (ISRAM0_DCR_BASE+0x08) /* SRAM bus core id reg */
-#define isram0_revid (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */
-#define isram0_dpc (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */
+#define isram0_sb0cr (ISRAM0_DCR_BASE+0x00) /* SRAM bank config 0*/
+#define isram0_sb1cr (ISRAM0_DCR_BASE+0x01) /* SRAM bank config 1*/
+#define isram0_sb2cr (ISRAM0_DCR_BASE+0x02) /* SRAM bank config 2*/
+#define isram0_sb3cr (ISRAM0_DCR_BASE+0x03) /* SRAM bank config 3*/
+#define isram0_bear (ISRAM0_DCR_BASE+0x04) /* SRAM bus error addr reg */
+#define isram0_besr0 (ISRAM0_DCR_BASE+0x05) /* SRAM bus error status reg 0 */
+#define isram0_besr1 (ISRAM0_DCR_BASE+0x06) /* SRAM bus error status reg 1 */
+#define isram0_pmeg (ISRAM0_DCR_BASE+0x07) /* SRAM power management */
+#define isram0_cid (ISRAM0_DCR_BASE+0x08) /* SRAM bus core id reg */
+#define isram0_revid (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */
+#define isram0_dpc (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */
/*-----------------------------------------------------------------------------
+ | L2 Cache
+ +----------------------------------------------------------------------------*/
+#if defined (CONFIG_440_GX)
+#define L2_CACHE_BASE 0x030
+#define l2_cache_cfg (L2_CACHE_BASE+0x00) /* L2 Cache Config */
+#define l2_cache_cmd (L2_CACHE_BASE+0x01) /* L2 Cache Command */
+#define l2_cache_addr (L2_CACHE_BASE+0x02) /* L2 Cache Address */
+#define l2_cache_data (L2_CACHE_BASE+0x03) /* L2 Cache Data */
+#define l2_cache_stat (L2_CACHE_BASE+0x04) /* L2 Cache Status */
+#define l2_cache_cver (L2_CACHE_BASE+0x05) /* L2 Cache Revision ID */
+#define l2_cache_snp0 (L2_CACHE_BASE+0x06) /* L2 Cache Snoop reg 0 */
+#define l2_cache_snp1 (L2_CACHE_BASE+0x07) /* L2 Cache Snoop reg 1 */
+
+#endif /* CONFIG_440_GX */
+
+/*-----------------------------------------------------------------------------
| On-Chip Buses
+----------------------------------------------------------------------------*/
/* TODO: as needed */
@@ -197,10 +275,15 @@
| Clocking, Power Management and Chip Control
+----------------------------------------------------------------------------*/
#define CNTRL_DCR_BASE 0x0b0
-
-#define cpc0_sr (CNTRL_DCR_BASE+0x00) /* CPM status register */
-#define cpc0_er (CNTRL_DCR_BASE+0x01) /* CPM enable register */
-#define cpc0_fr (CNTRL_DCR_BASE+0x02) /* CPM force register */
+#if defined (CONFIG_440_GX)
+#define cpc0_er (CNTRL_DCR_BASE+0x00) /* CPM enable register */
+#define cpc0_fr (CNTRL_DCR_BASE+0x01) /* CPM force register */
+#define cpc0_sr (CNTRL_DCR_BASE+0x02) /* CPM status register */
+#else
+#define cpc0_sr (CNTRL_DCR_BASE+0x00) /* CPM status register */
+#define cpc0_er (CNTRL_DCR_BASE+0x01) /* CPM enable register */
+#define cpc0_fr (CNTRL_DCR_BASE+0x02) /* CPM force register */
+#endif
#define cpc0_sys0 (CNTRL_DCR_BASE+0x30) /* System configuration reg 0 */
#define cpc0_sys1 (CNTRL_DCR_BASE+0x31) /* System configuration reg 1 */
@@ -212,31 +295,54 @@
#define cpc0_strp2 (CNTRL_DCR_BASE+0x36) /* Power-on config reg 2 (RO) */
#define cpc0_strp3 (CNTRL_DCR_BASE+0x37) /* Power-on config reg 3 (RO) */
-#define cntrl0 (CNTRL_DCR_BASE+0x3b) /* Control 0 register */
-#define cntrl1 (CNTRL_DCR_BASE+0x3a) /* Control 1 register */
+#define cntrl0 (CNTRL_DCR_BASE+0x3b) /* Control 0 register */
+#define cntrl1 (CNTRL_DCR_BASE+0x3a) /* Control 1 register */
/*-----------------------------------------------------------------------------
| Universal interrupt controller
+----------------------------------------------------------------------------*/
#define UIC0_DCR_BASE 0xc0
-#define uic0sr (UIC0_DCR_BASE+0x0) /* UIC0 status */
-#define uic0er (UIC0_DCR_BASE+0x2) /* UIC0 enable */
-#define uic0cr (UIC0_DCR_BASE+0x3) /* UIC0 critical */
-#define uic0pr (UIC0_DCR_BASE+0x4) /* UIC0 polarity */
-#define uic0tr (UIC0_DCR_BASE+0x5) /* UIC0 triggering */
-#define uic0msr (UIC0_DCR_BASE+0x6) /* UIC0 masked status */
-#define uic0vr (UIC0_DCR_BASE+0x7) /* UIC0 vector */
-#define uic0vcr (UIC0_DCR_BASE+0x8) /* UIC0 vector configuration */
+#define uic0sr (UIC0_DCR_BASE+0x0) /* UIC0 status */
+#define uic0er (UIC0_DCR_BASE+0x2) /* UIC0 enable */
+#define uic0cr (UIC0_DCR_BASE+0x3) /* UIC0 critical */
+#define uic0pr (UIC0_DCR_BASE+0x4) /* UIC0 polarity */
+#define uic0tr (UIC0_DCR_BASE+0x5) /* UIC0 triggering */
+#define uic0msr (UIC0_DCR_BASE+0x6) /* UIC0 masked status */
+#define uic0vr (UIC0_DCR_BASE+0x7) /* UIC0 vector */
+#define uic0vcr (UIC0_DCR_BASE+0x8) /* UIC0 vector configuration */
#define UIC1_DCR_BASE 0xd0
-#define uic1sr (UIC1_DCR_BASE+0x0) /* UIC1 status */
-#define uic1er (UIC1_DCR_BASE+0x2) /* UIC1 enable */
-#define uic1cr (UIC1_DCR_BASE+0x3) /* UIC1 critical */
-#define uic1pr (UIC1_DCR_BASE+0x4) /* UIC1 polarity */
-#define uic1tr (UIC1_DCR_BASE+0x5) /* UIC1 triggering */
-#define uic1msr (UIC1_DCR_BASE+0x6) /* UIC1 masked status */
-#define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */
-#define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */
+#define uic1sr (UIC1_DCR_BASE+0x0) /* UIC1 status */
+#define uic1er (UIC1_DCR_BASE+0x2) /* UIC1 enable */
+#define uic1cr (UIC1_DCR_BASE+0x3) /* UIC1 critical */
+#define uic1pr (UIC1_DCR_BASE+0x4) /* UIC1 polarity */
+#define uic1tr (UIC1_DCR_BASE+0x5) /* UIC1 triggering */
+#define uic1msr (UIC1_DCR_BASE+0x6) /* UIC1 masked status */
+#define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */
+#define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */
+
+#if defined(CONFIG_440_GX)
+#define UIC2_DCR_BASE 0x210
+#define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status */
+#define uic2er (UIC2_DCR_BASE+0x2) /* UIC2 enable */
+#define uic2cr (UIC2_DCR_BASE+0x3) /* UIC2 critical */
+#define uic2pr (UIC2_DCR_BASE+0x4) /* UIC2 polarity */
+#define uic2tr (UIC2_DCR_BASE+0x5) /* UIC2 triggering */
+#define uic2msr (UIC2_DCR_BASE+0x6) /* UIC2 masked status */
+#define uic2vr (UIC2_DCR_BASE+0x7) /* UIC2 vector */
+#define uic2vcr (UIC2_DCR_BASE+0x8) /* UIC2 vector configuration */
+
+
+#define UIC_DCR_BASE 0x200
+#define uicb0sr (UIC_DCR_BASE+0x0) /* UIC Base Status Register */
+#define uicb0er (UIC_DCR_BASE+0x2) /* UIC Base enable */
+#define uicb0cr (UIC_DCR_BASE+0x3) /* UIC Base critical */
+#define uicb0pr (UIC_DCR_BASE+0x4) /* UIC Base polarity */
+#define uicb0tr (UIC_DCR_BASE+0x5) /* UIC Base triggering */
+#define uicb0msr (UIC_DCR_BASE+0x6) /* UIC Base masked status */
+#define uicb0vr (UIC_DCR_BASE+0x7) /* UIC Base vector */
+#define uicb0vcr (UIC_DCR_BASE+0x8) /* UIC Base vector configuration */
+#endif /* CONFIG_440_GX */
/* The following is for compatibility with 405 code */
#define uicsr uic0sr
@@ -252,204 +358,308 @@
| DMA
+----------------------------------------------------------------------------*/
#define DMA_DCR_BASE 0x100
-#define dmacr0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */
-#define dmact0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */
-#define dmasah0 (DMA_DCR_BASE+0x02) /* DMA source address high 0 */
-#define dmasal0 (DMA_DCR_BASE+0x03) /* DMA source address low 0 */
-#define dmadah0 (DMA_DCR_BASE+0x04) /* DMA destination address high 0 */
-#define dmadal0 (DMA_DCR_BASE+0x05) /* DMA destination address low 0 */
+#define dmacr0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */
+#define dmact0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */
+#define dmasah0 (DMA_DCR_BASE+0x02) /* DMA source address high 0 */
+#define dmasal0 (DMA_DCR_BASE+0x03) /* DMA source address low 0 */
+#define dmadah0 (DMA_DCR_BASE+0x04) /* DMA destination address high 0 */
+#define dmadal0 (DMA_DCR_BASE+0x05) /* DMA destination address low 0 */
#define dmasgh0 (DMA_DCR_BASE+0x06) /* DMA scatter/gather desc addr high 0 */
#define dmasgl0 (DMA_DCR_BASE+0x07) /* DMA scatter/gather desc addr low 0 */
-#define dmacr1 (DMA_DCR_BASE+0x08) /* DMA channel control register 1 */
-#define dmact1 (DMA_DCR_BASE+0x09) /* DMA count register 1 */
-#define dmasah1 (DMA_DCR_BASE+0x0a) /* DMA source address high 1 */
-#define dmasal1 (DMA_DCR_BASE+0x0b) /* DMA source address low 1 */
-#define dmadah1 (DMA_DCR_BASE+0x0c) /* DMA destination address high 1 */
-#define dmadal1 (DMA_DCR_BASE+0x0d) /* DMA destination address low 1 */
+#define dmacr1 (DMA_DCR_BASE+0x08) /* DMA channel control register 1 */
+#define dmact1 (DMA_DCR_BASE+0x09) /* DMA count register 1 */
+#define dmasah1 (DMA_DCR_BASE+0x0a) /* DMA source address high 1 */
+#define dmasal1 (DMA_DCR_BASE+0x0b) /* DMA source address low 1 */
+#define dmadah1 (DMA_DCR_BASE+0x0c) /* DMA destination address high 1 */
+#define dmadal1 (DMA_DCR_BASE+0x0d) /* DMA destination address low 1 */
#define dmasgh1 (DMA_DCR_BASE+0x0e) /* DMA scatter/gather desc addr high 1 */
#define dmasgl1 (DMA_DCR_BASE+0x0f) /* DMA scatter/gather desc addr low 1 */
-#define dmacr2 (DMA_DCR_BASE+0x10) /* DMA channel control register 2 */
-#define dmact2 (DMA_DCR_BASE+0x11) /* DMA count register 2 */
-#define dmasah2 (DMA_DCR_BASE+0x12) /* DMA source address high 2 */
-#define dmasal2 (DMA_DCR_BASE+0x13) /* DMA source address low 2 */
-#define dmadah2 (DMA_DCR_BASE+0x14) /* DMA destination address high 2 */
-#define dmadal2 (DMA_DCR_BASE+0x15) /* DMA destination address low 2 */
+#define dmacr2 (DMA_DCR_BASE+0x10) /* DMA channel control register 2 */
+#define dmact2 (DMA_DCR_BASE+0x11) /* DMA count register 2 */
+#define dmasah2 (DMA_DCR_BASE+0x12) /* DMA source address high 2 */
+#define dmasal2 (DMA_DCR_BASE+0x13) /* DMA source address low 2 */
+#define dmadah2 (DMA_DCR_BASE+0x14) /* DMA destination address high 2 */
+#define dmadal2 (DMA_DCR_BASE+0x15) /* DMA destination address low 2 */
#define dmasgh2 (DMA_DCR_BASE+0x16) /* DMA scatter/gather desc addr high 2 */
#define dmasgl2 (DMA_DCR_BASE+0x17) /* DMA scatter/gather desc addr low 2 */
-#define dmacr3 (DMA_DCR_BASE+0x18) /* DMA channel control register 2 */
-#define dmact3 (DMA_DCR_BASE+0x19) /* DMA count register 2 */
-#define dmasah3 (DMA_DCR_BASE+0x1a) /* DMA source address high 2 */
-#define dmasal3 (DMA_DCR_BASE+0x1b) /* DMA source address low 2 */
-#define dmadah3 (DMA_DCR_BASE+0x1c) /* DMA destination address high 2 */
-#define dmadal3 (DMA_DCR_BASE+0x1d) /* DMA destination address low 2 */
+#define dmacr3 (DMA_DCR_BASE+0x18) /* DMA channel control register 2 */
+#define dmact3 (DMA_DCR_BASE+0x19) /* DMA count register 2 */
+#define dmasah3 (DMA_DCR_BASE+0x1a) /* DMA source address high 2 */
+#define dmasal3 (DMA_DCR_BASE+0x1b) /* DMA source address low 2 */
+#define dmadah3 (DMA_DCR_BASE+0x1c) /* DMA destination address high 2 */
+#define dmadal3 (DMA_DCR_BASE+0x1d) /* DMA destination address low 2 */
#define dmasgh3 (DMA_DCR_BASE+0x1e) /* DMA scatter/gather desc addr high 2 */
#define dmasgl3 (DMA_DCR_BASE+0x1f) /* DMA scatter/gather desc addr low 2 */
-#define dmasr (DMA_DCR_BASE+0x20) /* DMA status register */
-#define dmasgc (DMA_DCR_BASE+0x23) /* DMA scatter/gather command register */
-#define dmaslp (DMA_DCR_BASE+0x25) /* DMA sleep mode register */
-#define dmapol (DMA_DCR_BASE+0x26) /* DMA polarity configuration register */
+#define dmasr (DMA_DCR_BASE+0x20) /* DMA status register */
+#define dmasgc (DMA_DCR_BASE+0x23) /* DMA scatter/gather command register */
+#define dmaslp (DMA_DCR_BASE+0x25) /* DMA sleep mode register */
+#define dmapol (DMA_DCR_BASE+0x26) /* DMA polarity configuration register */
/*-----------------------------------------------------------------------------
| Memory Access Layer
+----------------------------------------------------------------------------*/
#define MAL_DCR_BASE 0x180
-#define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */
-#define malesr (MAL_DCR_BASE+0x01) /* Error Status reg (Read/Clear) */
-#define malier (MAL_DCR_BASE+0x02) /* Interrupt enable reg */
-#define maldbr (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only) */
-#define maltxcasr (MAL_DCR_BASE+0x04) /* TX Channel active reg (set) */
+#define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */
+#define malesr (MAL_DCR_BASE+0x01) /* Error Status reg (Read/Clear) */
+#define malier (MAL_DCR_BASE+0x02) /* Interrupt enable reg */
+#define maldbr (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only) */
+#define maltxcasr (MAL_DCR_BASE+0x04) /* TX Channel active reg (set) */
#define maltxcarr (MAL_DCR_BASE+0x05) /* TX Channel active reg (Reset) */
#define maltxeobisr (MAL_DCR_BASE+0x06) /* TX End of buffer int status reg */
-#define maltxdeir (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg */
-#define maltxtattrr (MAL_DCR_BASE+0x08) /* TX PLB attribute reg */
-#define maltxbattr (MAL_DCR_BASE+0x09) /* TX descriptor base addr reg */
-#define malrxcasr (MAL_DCR_BASE+0x10) /* RX Channel active reg (set) */
+#define maltxdeir (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg */
+#define maltxtattrr (MAL_DCR_BASE+0x08) /* TX PLB attribute reg */
+#define maltxbattr (MAL_DCR_BASE+0x09) /* TX descriptor base addr reg */
+#define malrxcasr (MAL_DCR_BASE+0x10) /* RX Channel active reg (set) */
#define malrxcarr (MAL_DCR_BASE+0x11) /* RX Channel active reg (Reset) */
#define malrxeobisr (MAL_DCR_BASE+0x12) /* RX End of buffer int status reg */
-#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */
-#define malrxtattrr (MAL_DCR_BASE+0x14) /* RX PLB attribute reg */
-#define malrxbattr (MAL_DCR_BASE+0x15) /* RX descriptor base addr reg */
+#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */
+#define malrxtattrr (MAL_DCR_BASE+0x14) /* RX PLB attribute reg */
+#define malrxbattr (MAL_DCR_BASE+0x15) /* RX descriptor base addr reg */
#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table pointer reg */
#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table pointer reg */
+#if defined(CONFIG_440_GX)
+#define maltxctp2r (MAL_DCR_BASE+0x22) /* TX 2 Channel table pointer reg */
+#define maltxctp3r (MAL_DCR_BASE+0x23) /* TX 3 Channel table pointer reg */
+#endif /* CONFIG_440_GX */
#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */
#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */
-#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */
+#if defined(CONFIG_440_GX)
+#define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 0 Channel table pointer reg */
+#define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 1 Channel table pointer reg */
+#endif /* CONFIG_440_GX */
+#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */
+#define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */
+#if defined(CONFIG_440_GX)
+#define malrcbs2 (MAL_DCR_BASE+0x62) /* RX 2 Channel buffer size reg */
+#define malrcbs3 (MAL_DCR_BASE+0x63) /* RX 3 Channel buffer size reg */
+#endif /* CONFIG_440_GX */
+
/*---------------------------------------------------------------------------+
| Universal interrupt controller 0 interrupts (UIC0)
+---------------------------------------------------------------------------*/
-#define UIC_U0 0x80000000 /* UART 0 */
-#define UIC_U1 0x40000000 /* UART 1 */
-#define UIC_IIC0 0x20000000 /* IIC */
-#define UIC_IIC1 0x10000000 /* IIC */
-#define UIC_PIM 0x08000000 /* PCI inbound message */
-#define UIC_PCRW 0x04000000 /* PCI command register write */
-#define UIC_PPM 0x02000000 /* PCI power management */
-#define UIC_MSI0 0x01000000 /* PCI MSI level 0 */
-#define UIC_MSI1 0x00800000 /* PCI MSI level 1 */
-#define UIC_MSI2 0x00400000 /* PCI MSI level 2 */
-#define UIC_MTE 0x00200000 /* MAL TXEOB */
-#define UIC_MRE 0x00100000 /* MAL RXEOB */
-#define UIC_D0 0x00080000 /* DMA channel 0 */
-#define UIC_D1 0x00040000 /* DMA channel 1 */
-#define UIC_D2 0x00020000 /* DMA channel 2 */
-#define UIC_D3 0x00010000 /* DMA channel 3 */
-#define UIC_RSVD0 0x00008000 /* Reserved */
-#define UIC_RSVD1 0x00004000 /* Reserved */
-#define UIC_CT0 0x00002000 /* GPT compare timer 0 */
-#define UIC_CT1 0x00001000 /* GPT compare timer 1 */
-#define UIC_CT2 0x00000800 /* GPT compare timer 2 */
-#define UIC_CT3 0x00000400 /* GPT compare timer 3 */
-#define UIC_CT4 0x00000200 /* GPT compare timer 4 */
-#define UIC_EIR0 0x00000100 /* External interrupt 0 */
-#define UIC_EIR1 0x00000080 /* External interrupt 1 */
-#define UIC_EIR2 0x00000040 /* External interrupt 2 */
-#define UIC_EIR3 0x00000020 /* External interrupt 3 */
-#define UIC_EIR4 0x00000010 /* External interrupt 4 */
-#define UIC_EIR5 0x00000008 /* External interrupt 5 */
-#define UIC_EIR6 0x00000004 /* External interrupt 6 */
-#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
-#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
+#define UIC_U0 0x80000000 /* UART 0 */
+#define UIC_U1 0x40000000 /* UART 1 */
+#define UIC_IIC0 0x20000000 /* IIC */
+#define UIC_IIC1 0x10000000 /* IIC */
+#define UIC_PIM 0x08000000 /* PCI inbound message */
+#define UIC_PCRW 0x04000000 /* PCI command register write */
+#define UIC_PPM 0x02000000 /* PCI power management */
+#define UIC_MSI0 0x01000000 /* PCI MSI level 0 */
+#define UIC_MSI1 0x00800000 /* PCI MSI level 1 */
+#define UIC_MSI2 0x00400000 /* PCI MSI level 2 */
+#define UIC_MTE 0x00200000 /* MAL TXEOB */
+#define UIC_MRE 0x00100000 /* MAL RXEOB */
+#define UIC_D0 0x00080000 /* DMA channel 0 */
+#define UIC_D1 0x00040000 /* DMA channel 1 */
+#define UIC_D2 0x00020000 /* DMA channel 2 */
+#define UIC_D3 0x00010000 /* DMA channel 3 */
+#define UIC_RSVD0 0x00008000 /* Reserved */
+#define UIC_RSVD1 0x00004000 /* Reserved */
+#define UIC_CT0 0x00002000 /* GPT compare timer 0 */
+#define UIC_CT1 0x00001000 /* GPT compare timer 1 */
+#define UIC_CT2 0x00000800 /* GPT compare timer 2 */
+#define UIC_CT3 0x00000400 /* GPT compare timer 3 */
+#define UIC_CT4 0x00000200 /* GPT compare timer 4 */
+#define UIC_EIR0 0x00000100 /* External interrupt 0 */
+#define UIC_EIR1 0x00000080 /* External interrupt 1 */
+#define UIC_EIR2 0x00000040 /* External interrupt 2 */
+#define UIC_EIR3 0x00000020 /* External interrupt 3 */
+#define UIC_EIR4 0x00000010 /* External interrupt 4 */
+#define UIC_EIR5 0x00000008 /* External interrupt 5 */
+#define UIC_EIR6 0x00000004 /* External interrupt 6 */
+#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
+#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
/* For compatibility with 405 code */
-#define UIC_MAL_TXEOB UIC_MTE
-#define UIC_MAL_RXEOB UIC_MRE
+#define UIC_MAL_TXEOB UIC_MTE
+#define UIC_MAL_RXEOB UIC_MRE
/*---------------------------------------------------------------------------+
| Universal interrupt controller 1 interrupts (UIC1)
+---------------------------------------------------------------------------*/
-#define UIC_MS 0x80000000 /* MAL SERR */
-#define UIC_MTDE 0x40000000 /* MAL TXDE */
-#define UIC_MRDE 0x20000000 /* MAL RXDE */
-#define UIC_DEUE 0x10000000 /* DDR SDRAM ECC uncorrectible error*/
-#define UIC_DECE 0x08000000 /* DDR SDRAM correctible error */
-#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
-#define UIC_EBMI 0x02000000 /* EBMI interrupt status */
-#define UIC_OPB 0x01000000 /* OPB to PLB bridge interrupt stat */
-#define UIC_MSI3 0x00800000 /* PCI MSI level 3 */
-#define UIC_MSI4 0x00400000 /* PCI MSI level 4 */
-#define UIC_MSI5 0x00200000 /* PCI MSI level 5 */
-#define UIC_MSI6 0x00100000 /* PCI MSI level 6 */
-#define UIC_MSI7 0x00080000 /* PCI MSI level 7 */
-#define UIC_MSI8 0x00040000 /* PCI MSI level 8 */
-#define UIC_MSI9 0x00020000 /* PCI MSI level 9 */
-#define UIC_MSI10 0x00010000 /* PCI MSI level 10 */
-#define UIC_MSI11 0x00008000 /* PCI MSI level 11 */
-#define UIC_PPMI 0x00004000 /* PPM interrupt status */
-#define UIC_EIR7 0x00002000 /* External interrupt 7 */
-#define UIC_EIR8 0x00001000 /* External interrupt 8 */
-#define UIC_EIR9 0x00000800 /* External interrupt 9 */
-#define UIC_EIR10 0x00000400 /* External interrupt 10 */
-#define UIC_EIR11 0x00000200 /* External interrupt 11 */
-#define UIC_EIR12 0x00000100 /* External interrupt 12 */
-#define UIC_SRE 0x00000080 /* Serial ROM error */
-#define UIC_RSVD2 0x00000040 /* Reserved */
-#define UIC_RSVD3 0x00000020 /* Reserved */
-#define UIC_PAE 0x00000010 /* PCI asynchronous error */
-#define UIC_ETH0 0x00000008 /* Ethernet 0 */
-#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
-#define UIC_ETH1 0x00000002 /* Ethernet 1 */
-#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */
+#define UIC_MS 0x80000000 /* MAL SERR */
+#define UIC_MTDE 0x40000000 /* MAL TXDE */
+#define UIC_MRDE 0x20000000 /* MAL RXDE */
+#define UIC_DEUE 0x10000000 /* DDR SDRAM ECC uncorrectible error*/
+#define UIC_DECE 0x08000000 /* DDR SDRAM correctible error */
+#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
+#define UIC_EBMI 0x02000000 /* EBMI interrupt status */
+#define UIC_OPB 0x01000000 /* OPB to PLB bridge interrupt stat */
+#define UIC_MSI3 0x00800000 /* PCI MSI level 3 */
+#define UIC_MSI4 0x00400000 /* PCI MSI level 4 */
+#define UIC_MSI5 0x00200000 /* PCI MSI level 5 */
+#define UIC_MSI6 0x00100000 /* PCI MSI level 6 */
+#define UIC_MSI7 0x00080000 /* PCI MSI level 7 */
+#define UIC_MSI8 0x00040000 /* PCI MSI level 8 */
+#define UIC_MSI9 0x00020000 /* PCI MSI level 9 */
+#define UIC_MSI10 0x00010000 /* PCI MSI level 10 */
+#define UIC_MSI11 0x00008000 /* PCI MSI level 11 */
+#define UIC_PPMI 0x00004000 /* PPM interrupt status */
+#define UIC_EIR7 0x00002000 /* External interrupt 7 */
+#define UIC_EIR8 0x00001000 /* External interrupt 8 */
+#define UIC_EIR9 0x00000800 /* External interrupt 9 */
+#define UIC_EIR10 0x00000400 /* External interrupt 10 */
+#define UIC_EIR11 0x00000200 /* External interrupt 11 */
+#define UIC_EIR12 0x00000100 /* External interrupt 12 */
+#define UIC_SRE 0x00000080 /* Serial ROM error */
+#define UIC_RSVD2 0x00000040 /* Reserved */
+#define UIC_RSVD3 0x00000020 /* Reserved */
+#define UIC_PAE 0x00000010 /* PCI asynchronous error */
+#define UIC_ETH0 0x00000008 /* Ethernet 0 */
+#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
+#define UIC_ETH1 0x00000002 /* Ethernet 1 */
+#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */
/* For compatibility with 405 code */
-#define UIC_MAL_SERR UIC_MS
-#define UIC_MAL_TXDE UIC_MTDE
-#define UIC_MAL_RXDE UIC_MRDE
-#define UIC_ENET UIC_ETH0
+#define UIC_MAL_SERR UIC_MS
+#define UIC_MAL_TXDE UIC_MTDE
+#define UIC_MAL_RXDE UIC_MRDE
+#define UIC_ENET UIC_ETH0
+
+/*---------------------------------------------------------------------------+
+| Universal interrupt controller 2 interrupts (UIC2)
++---------------------------------------------------------------------------*/
+#if defined(CONFIG_440_GX)
+#define UIC_ETH2 0x80000000 /* Ethernet 2 */
+#define UIC_EWU2 0x40000000 /* Ethernet 2 wakeup */
+#define UIC_ETH3 0x20000000 /* Ethernet 3 */
+#define UIC_EWU3 0x10000000 /* Ethernet 3 wakeup */
+#define UIC_TAH0 0x08000000 /* TAH 0 */
+#define UIC_TAH1 0x04000000 /* TAH 1 */
+#define UIC_IMUOBFQ 0x02000000 /* IMU outbound free queue */
+#define UIC_IMUIBPQ 0x01000000 /* IMU inbound post queue */
+#define UIC_IMUIRQDB 0x00800000 /* IMU irq doorbell */
+#define UIC_IMUIBDB 0x00400000 /* IMU inbound doorbell */
+#define UIC_IMUMSG0 0x00200000 /* IMU inbound message 0 */
+#define UIC_IMUMSG1 0x00100000 /* IMU inbound message 1 */
+#define UIC_IMUTO 0x00080000 /* IMU timeout */
+#define UIC_MSI12 0x00040000 /* PCI MSI level 12 */
+#define UIC_MSI13 0x00020000 /* PCI MSI level 13 */
+#define UIC_MSI14 0x00010000 /* PCI MSI level 14 */
+#define UIC_MSI15 0x00008000 /* PCI MSI level 15 */
+#define UIC_EIR13 0x00004000 /* External interrupt 13 */
+#define UIC_EIR14 0x00002000 /* External interrupt 14 */
+#define UIC_EIR15 0x00001000 /* External interrupt 15 */
+#define UIC_EIR16 0x00000800 /* External interrupt 16 */
+#define UIC_EIR17 0x00000400 /* External interrupt 17 */
+#define UIC_PCIVPD 0x00000200 /* PCI VPD */
+#define UIC_L2C 0x00000100 /* L2 Cache */
+#define UIC_ETH2PCS 0x00000080 /* Ethernet 2 PCS */
+#define UIC_ETH3PCS 0x00000040 /* Ethernet 3 PCS */
+#define UIC_RSVD26 0x00000020 /* Reserved */
+#define UIC_RSVD27 0x00000010 /* Reserved */
+#define UIC_RSVD28 0x00000008 /* Reserved */
+#define UIC_RSVD29 0x00000004 /* Reserved */
+#define UIC_RSVD30 0x00000002 /* Reserved */
+#define UIC_RSVD31 0x00000001 /* Reserved */
+#endif /* CONFIG_440_GX */
+
+/*---------------------------------------------------------------------------+
+| Universal interrupt controller Base 0 interrupts (UICB0)
++---------------------------------------------------------------------------*/
+#if defined(CONFIG_440_GX)
+#define UICB0_UIC0CI 0x80000000 /* UIC0 Critical Interrupt */
+#define UICB0_UIC0NCI 0x40000000 /* UIC0 Noncritical Interrupt */
+#define UICB0_UIC1CI 0x20000000 /* UIC1 Critical Interrupt */
+#define UICB0_UIC1NCI 0x10000000 /* UIC1 Noncritical Interrupt */
+#define UICB0_UIC2CI 0x08000000 /* UIC2 Critical Interrupt */
+#define UICB0_UIC2NCI 0x04000000 /* UIC2 Noncritical Interrupt */
+
+#define UICB0_ALL (UICB0_UIC0CI | UICB0_UIC0NCI | UICB0_UIC1CI | \
+ UICB0_UIC1NCI | UICB0_UIC2CI | UICB0_UIC2NCI)
+#endif /* CONFIG_440_GX */
/*-----------------------------------------------------------------------------+
| Clocking
+-----------------------------------------------------------------------------*/
-#define PLLSYS0_TUNE_MASK 0xffc00000 /* PLL TUNE bits */
-#define PLLSYS0_FB_DIV_MASK 0x003c0000 /* Feedback divisor */
-#define PLLSYS0_FWD_DIV_A_MASK 0x00038000 /* Forward divisor A */
-#define PLLSYS0_FWD_DIV_B_MASK 0x00007000 /* Forward divisor B */
-#define PLLSYS0_OPB_DIV_MASK 0x00000c00 /* OPB divisor */
-#define PLLSYS0_EPB_DIV_MASK 0x00000300 /* EPB divisor */
-#define PLLSYS0_EXTSL_MASK 0x00000080 /* PerClk feedback path */
-#define PLLSYS0_RW_MASK 0x00000060 /* ROM width */
-#define PLLSYS0_RL_MASK 0x00000010 /* ROM location */
-#define PLLSYS0_ZMII_SEL_MASK 0x0000000c /* ZMII selection */
-#define PLLSYS0_BYPASS_MASK 0x00000002 /* Bypass PLL */
-#define PLLSYS0_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
+#if !defined (CONFIG_440_GX)
+#define PLLSYS0_TUNE_MASK 0xffc00000 /* PLL TUNE bits */
+#define PLLSYS0_FB_DIV_MASK 0x003c0000 /* Feedback divisor */
+#define PLLSYS0_FWD_DIV_A_MASK 0x00038000 /* Forward divisor A */
+#define PLLSYS0_FWD_DIV_B_MASK 0x00007000 /* Forward divisor B */
+#define PLLSYS0_OPB_DIV_MASK 0x00000c00 /* OPB divisor */
+#define PLLSYS0_EPB_DIV_MASK 0x00000300 /* EPB divisor */
+#define PLLSYS0_EXTSL_MASK 0x00000080 /* PerClk feedback path */
+#define PLLSYS0_RW_MASK 0x00000060 /* ROM width */
+#define PLLSYS0_RL_MASK 0x00000010 /* ROM location */
+#define PLLSYS0_ZMII_SEL_MASK 0x0000000c /* ZMII selection */
+#define PLLSYS0_BYPASS_MASK 0x00000002 /* Bypass PLL */
+#define PLLSYS0_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
-#define PLL_VCO_FREQ_MIN 500 /* Min VCO freq (MHz) */
-#define PLL_VCO_FREQ_MAX 1000 /* Max VCO freq (MHz) */
-#define PLL_CPU_FREQ_MAX 400 /* Max CPU freq (MHz) */
-#define PLL_PLB_FREQ_MAX 133 /* Max PLB freq (MHz) */
+#define PLL_VCO_FREQ_MIN 500 /* Min VCO freq (MHz) */
+#define PLL_VCO_FREQ_MAX 1000 /* Max VCO freq (MHz) */
+#define PLL_CPU_FREQ_MAX 400 /* Max CPU freq (MHz) */
+#define PLL_PLB_FREQ_MAX 133 /* Max PLB freq (MHz) */
+#else /* !CONFIG_440_GX */
+#define PLLSYS0_ENG_MASK 0x80000000 /* 0 = SysClk, 1 = PLL VCO */
+#define PLLSYS0_SRC_MASK 0x40000000 /* 0 = PLL A, 1 = PLL B */
+#define PLLSYS0_SEL_MASK 0x38000000 /* 0 = PLL, 1 = CPU, 5 = PerClk */
+#define PLLSYS0_TUNE_MASK 0x07fe0000 /* PLL Tune bits */
+#define PLLSYS0_FB_DIV_MASK 0x0001f000 /* Feedback divisor */
+#define PLLSYS0_FWD_DIV_A_MASK 0x00000f00 /* Fwd Div A */
+#define PLLSYS0_FWD_DIV_B_MASK 0x000000e0 /* Fwd Div B */
+#define PLLSYS0_PRI_DIV_B_MASK 0x0000001c /* PLL Primary Divisor B */
+#define PLLSYS0_OPB_DIV_MASK 0x00000003 /* OPB Divisor */
+
+#define PLL_VCO_FREQ_MIN 500 /* Min VCO freq (MHz) */
+#define PLL_VCO_FREQ_MAX 1000 /* Max VCO freq (MHz) */
+#define PLL_CPU_FREQ_MAX 400 /* Max CPU freq (MHz) */
+#define PLL_PLB_FREQ_MAX 133 /* Max PLB freq (MHz) */
+
+/* Strap 1 Register */
+#define PLLSYS1_LF_DIV_MASK 0xfc000000 /* PLL Local Feedback Divisor */
+#define PLLSYS1_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */
+#define PLLSYS1_MAL_DIV_MASK 0x00c00000 /* MAL Clk Divisor */
+#define PLLSYS1_RW_MASK 0x00300000 /* ROM width */
+#define PLLSYS1_EAR_MASK 0x00080000 /* ERAP Addres reset vector */
+#define PLLSYS1_PAE_MASK 0x00040000 /* PCI arbitor enable */
+#define PLLSYS1_PCHE_MASK 0x00020000 /* PCI host config enable */
+#define PLLSYS1_PISE_MASK 0x00010000 /* PCI init seq. enable */
+#define PLLSYS1_PCWE_MASK 0x00008000 /* PCI local cpu wait enable */
+#define PLLSYS1_PPIM_MASK 0x00007800 /* PCI inbound map */
+#define PLLSYS1_PR64E_MASK 0x00000400 /* PCI init Req64 enable */
+#define PLLSYS1_PXFS_MASK 0x00000300 /* PCI-X Freq Sel */
+#define PLLSYS1_RSVD_MASK 0x00000080 /* RSVD */
+#define PLLSYS1_PDM_MASK 0x00000040 /* PCI-X Driver Mode */
+#define PLLSYS1_EPS_MASK 0x00000038 /* Ethernet Pin Select */
+#define PLLSYS1_RMII_MASK 0x00000004 /* RMII Mode */
+#define PLLSYS1_TRE_MASK 0x00000002 /* GPIO Trace Enable */
+#define PLLSYS1_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
+#endif /* CONFIG_440_GX */
/*-----------------------------------------------------------------------------
| IIC Register Offsets
'----------------------------------------------------------------------------*/
-#define IICMDBUF 0x00
-#define IICSDBUF 0x02
-#define IICLMADR 0x04
-#define IICHMADR 0x05
-#define IICCNTL 0x06
-#define IICMDCNTL 0x07
-#define IICSTS 0x08
-#define IICEXTSTS 0x09
-#define IICLSADR 0x0A
-#define IICHSADR 0x0B
-#define IICCLKDIV 0x0C
-#define IICINTRMSK 0x0D
-#define IICXFRCNT 0x0E
-#define IICXTCNTLSS 0x0F
-#define IICDIRECTCNTL 0x10
+#define IICMDBUF 0x00
+#define IICSDBUF 0x02
+#define IICLMADR 0x04
+#define IICHMADR 0x05
+#define IICCNTL 0x06
+#define IICMDCNTL 0x07
+#define IICSTS 0x08
+#define IICEXTSTS 0x09
+#define IICLSADR 0x0A
+#define IICHSADR 0x0B
+#define IICCLKDIV 0x0C
+#define IICINTRMSK 0x0D
+#define IICXFRCNT 0x0E
+#define IICXTCNTLSS 0x0F
+#define IICDIRECTCNTL 0x10
/*-----------------------------------------------------------------------------
| UART Register Offsets
'----------------------------------------------------------------------------*/
#define DATA_REG 0x00
-#define DL_LSB 0x00
-#define DL_MSB 0x01
-#define INT_ENABLE 0x01
-#define FIFO_CONTROL 0x02
-#define LINE_CONTROL 0x03
-#define MODEM_CONTROL 0x04
-#define LINE_STATUS 0x05
-#define MODEM_STATUS 0x06
-#define SCRATCH 0x07
+#define DL_LSB 0x00
+#define DL_MSB 0x01
+#define INT_ENABLE 0x01
+#define FIFO_CONTROL 0x02
+#define LINE_CONTROL 0x03
+#define MODEM_CONTROL 0x04
+#define LINE_STATUS 0x05
+#define MODEM_STATUS 0x06
+#define SCRATCH 0x07
/*-----------------------------------------------------------------------------
| PCI Internal Registers et. al. (accessed via plb)
@@ -488,8 +698,8 @@
#define PCIX0_MINGNT (PCIX0_CFGBASE + PCI_MIN_GNT )
#define PCIX0_MAXLTNCY (PCIX0_CFGBASE + PCI_MAX_LAT )
-#define PCIX0_BRDGOPT1 (PCIX0_CFGBASE + 0x0040)
-#define PCIX0_BRDGOPT2 (PCIX0_CFGBASE + 0x0044)
+#define PCIX0_BRDGOPT1 (PCIX0_CFGBASE + 0x0040)
+#define PCIX0_BRDGOPT2 (PCIX0_CFGBASE + 0x0044)
#define PCIX0_POM0LAL (PCIX0_CFGBASE + 0x0068)
#define PCIX0_POM0LAH (PCIX0_CFGBASE + 0x006c)
@@ -513,7 +723,7 @@
#define PCIX0_PIM2LAL (PCIX0_CFGBASE + 0x00b4)
#define PCIX0_PIM2LAH (PCIX0_CFGBASE + 0x00b8)
-#define PCIX0_STS (PCIX0_CFGBASE + 0x00e0)
+#define PCIX0_STS (PCIX0_CFGBASE + 0x00e0)
/*
* Macros for accessing the indirect EBC registers
@@ -527,6 +737,18 @@
#define mtsdram(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data)
#define mfsdram(reg, data) mtdcr(memcfga,reg);data = mfdcr(memcfgd)
+/*
+ * Macros for accessing the indirect clocking controller registers
+ */
+#define mtclk(reg, data) mtdcr(clkcfga,reg);mtdcr(clkcfgd,data)
+#define mfclk(reg, data) mtdcr(clkcfga,reg);data = mfdcr(clkcfgd)
+
+/*
+ * Macros for accessing the sdr controller registers
+ */
+#define mtsdr(reg, data) mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data)
+#define mfsdr(reg, data) mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd)
+
#ifndef __ASSEMBLY__
@@ -537,14 +759,14 @@
unsigned long pllFbkDiv;
unsigned long pllOpbDiv;
unsigned long pllExtBusDiv;
- unsigned long freqVCOMhz; /* in MHz */
+ unsigned long freqVCOMhz; /* in MHz */
unsigned long freqProcessor;
unsigned long freqPLB;
unsigned long freqOPB;
unsigned long freqEPB;
} PPC440_SYS_INFO;
-#endif /* _ASMLANGUAGE */
+#endif /* _ASMLANGUAGE */
#define RESET_VECTOR 0xfffffffc
#define CACHELINE_MASK (CFG_CACHELINE_SIZE - 1) /* Address mask for cache