Patch by Travis Sawyer, 30 Dec 2003:
Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
select MDI port based on enabled EMAC device.
Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
base PrPMC board.
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index 7263227..dfd2a04 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -206,6 +206,7 @@
#elif defined(CONFIG_440)
+#if !defined(CONFIG_440_GX)
void get_sys_info (sys_info_t * sysInfo)
{
unsigned long strp0;
@@ -237,6 +238,58 @@
sysInfo->freqEPB = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
}
+#else
+void get_sys_info (sys_info_t * sysInfo)
+{
+ unsigned long strp0;
+ unsigned long strp1;
+ unsigned long temp;
+ unsigned long temp1;
+ unsigned long lfdiv;
+ unsigned long m;
+
+
+ /* Extract configured divisors */
+ mfsdr( sdr_sdstp0,strp0 );
+ mfsdr( sdr_sdstp1,strp1 );
+
+ temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 8);
+ sysInfo->pllFwdDivA = temp ? temp : 16 ;
+ temp = ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 5);
+ sysInfo->pllFwdDivB = temp ? temp: 8 ;
+ temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 12;
+ sysInfo->pllFbkDiv = temp ? temp : 32;
+ temp = (strp0 & PLLSYS0_OPB_DIV_MASK);
+ sysInfo->pllOpbDiv = temp ? temp : 4;
+ temp = (strp1 & PLLSYS1_PERCLK_DIV_MASK) >> 24;
+ sysInfo->pllExtBusDiv = temp ? temp : 4;
+
+ /* Calculate 'M' based on feedback source */
+ temp = (strp0 & PLLSYS0_SEL_MASK) >> 27;
+ temp1 = (strp1 & PLLSYS1_LF_DIV_MASK) >> 26;
+ lfdiv = temp1 ? temp1 : 64;
+ if (temp == 0) { /* PLL output */
+ /* Figure which pll to use */
+ temp = (strp0 & PLLSYS0_SRC_MASK) >> 30;
+ if (!temp)
+ m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
+ else
+ m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
+ }
+ else if (temp == 1) /* CPU output */
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
+ else /* PerClk */
+ m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
+
+ /* Now calculate the individual clocks */
+ sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
+ sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
+ sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB;
+ sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
+ sysInfo->freqEPB = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
+
+}
+#endif
ulong get_OPB_freq (void)
{