am335x: fix GPMC config for NAND and NOR SPL boot
GPMC controller is common IP to interface with both NAND and NOR flash devices.
Also, it supports max 8 chip-selects, which can be independently connected to
any of the devices.
But ROM code expects the boot-device to be connected to only chip-select[0].
Thus to resolve conflict between NOR and NAND boot. This patch:
- combines NOR and NAND configs spread in board files to common gpmc_init()
- configures GPMC based on boot-mode selected for SPL boot.
Signed-off-by: Pekon Gupta <pekon@ti.com>
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 57fedab..0299dd6 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -481,26 +481,14 @@
*/
int board_init(void)
{
-#ifdef CONFIG_NOR
- const u32 gpmc_nor[GPMC_MAX_REG] = { STNOR_GPMC_CONFIG1,
- STNOR_GPMC_CONFIG2, STNOR_GPMC_CONFIG3, STNOR_GPMC_CONFIG4,
- STNOR_GPMC_CONFIG5, STNOR_GPMC_CONFIG6, STNOR_GPMC_CONFIG7 };
-#endif
-
#if defined(CONFIG_HW_WATCHDOG)
hw_watchdog_init();
#endif
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
+#if defined(CONFIG_NOR) || defined(CONFIG_NAND)
gpmc_init();
-
-#ifdef CONFIG_NOR
- /* Reconfigure CS0 for NOR instead of NAND. */
- enable_gpmc_cs_config(gpmc_nor, &gpmc_cfg->cs[0],
- CONFIG_SYS_FLASH_BASE, GPMC_SIZE_16M);
#endif
-
return 0;
}