ram: Add driver for MPC83xx
Add a RAM driver for the MPC83xx architecture.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
diff --git a/include/dt-bindings/memory/mpc83xx-sdram.h b/include/dt-bindings/memory/mpc83xx-sdram.h
new file mode 100644
index 0000000..7d4ce01
--- /dev/null
+++ b/include/dt-bindings/memory/mpc83xx-sdram.h
@@ -0,0 +1,161 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2018
+ * Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc
+ */
+
+#ifndef DT_BINDINGS_MPC83XX_SDRAM_H
+#define DT_BINDINGS_MPC83XX_SDRAM_H
+
+/* DDR Control Driver register */
+
+#define DSO_DISABLE 0
+#define DSO_ENABLE 1
+
+#define DSO_P_IMPEDANCE_HIGHEST_Z 0x0
+#define DSO_P_IMPEDANCE_MUCH_HIGHER_Z 0x8
+#define DSO_P_IMPEDANCE_HIGHER_Z 0xC
+#define DSO_P_IMPEDANCE_NOMINAL 0xE
+#define DSO_P_IMPEDANCE_LOWER_Z 0xF
+
+#define DSO_N_IMPEDANCE_HIGHEST_Z 0x0
+#define DSO_N_IMPEDANCE_MUCH_HIGHER_Z 0x8
+#define DSO_N_IMPEDANCE_HIGHER_Z 0xC
+#define DSO_N_IMPEDANCE_NOMINAL 0xE
+#define DSO_N_IMPEDANCE_LOWER_Z 0xF
+
+#define ODT_TERMINATION_75_OHM 0
+#define ODT_TERMINATION_150_OHM 1
+
+#define DDR_TYPE_DDR2_1_8_VOLT 0
+#define DDR_TYPE_DDR1_2_5_VOLT 1
+
+#define MVREF_SEL_EXTERNAL 0
+#define MVREF_SEL_INTERNAL_GVDD 1
+
+#define M_ODR_ENABLE 0
+#define M_ODR_DISABLE 1
+
+/* CS config register */
+
+#define AUTO_PRECHARGE_ENABLE 0x00800000
+#define AUTO_PRECHARGE_DISABLE 0x00000000
+
+#define ODT_RD_NEVER 0x00000000
+#define ODT_RD_ONLY_CURRENT 0x00100000
+#define ODT_RD_ONLY_OTHER_CS 0x00200000
+#define ODT_RD_ONLY_OTHER_DIMM 0x00300000
+#define ODT_RD_ALL 0x00400000
+
+#define ODT_WR_NEVER 0x00000000
+#define ODT_WR_ONLY_CURRENT 0x00010000
+#define ODT_WR_ONLY_OTHER_CS 0x00020000
+#define ODT_WR_ONLY_OTHER_DIMM 0x00030000
+#define ODT_WR_ALL 0x00040000
+
+/* DDR SDRAM Clock Control register */
+
+#define CLOCK_ADJUST_025 0x01000000
+#define CLOCK_ADJUST_05 0x02000000
+#define CLOCK_ADJUST_075 0x03000000
+#define CLOCK_ADJUST_1 0x04000000
+
+#define CASLAT_20 0x3 /* CAS latency = 2.0 */
+#define CASLAT_25 0x4 /* CAS latency = 2.5 */
+#define CASLAT_30 0x5 /* CAS latency = 3.0 */
+#define CASLAT_35 0x6 /* CAS latency = 3.5 */
+#define CASLAT_40 0x7 /* CAS latency = 4.0 */
+#define CASLAT_45 0x8 /* CAS latency = 4.5 */
+#define CASLAT_50 0x9 /* CAS latency = 5.0 */
+#define CASLAT_55 0xa /* CAS latency = 5.5 */
+#define CASLAT_60 0xb /* CAS latency = 6.0 */
+#define CASLAT_65 0xc /* CAS latency = 6.5 */
+#define CASLAT_70 0xd /* CAS latency = 7.0 */
+#define CASLAT_75 0xe /* CAS latency = 7.5 */
+#define CASLAT_80 0xf /* CAS latency = 8.0 */
+
+/* DDR SDRAM Timing Configuration 2 register */
+
+#define READ_LAT_PLUS_1 0x0
+#define READ_LAT 0x2
+#define READ_LAT_PLUS_1_4 0x3
+#define READ_LAT_PLUS_1_2 0x4
+#define READ_LAT_PLUS_3_4 0x5
+#define READ_LAT_PLUS_5_4 0x7
+#define READ_LAT_PLUS_3_2 0x8
+#define READ_LAT_PLUS_7_4 0x9
+#define READ_LAT_PLUS_2 0xA
+#define READ_LAT_PLUS_9_4 0xB
+#define READ_LAT_PLUS_5_2 0xC
+#define READ_LAT_PLUS_11_4 0xD
+#define READ_LAT_PLUS_3 0xE
+#define READ_LAT_PLUS_13_4 0xF
+#define READ_LAT_PLUS_7_2 0x10
+#define READ_LAT_PLUS_15_4 0x11
+#define READ_LAT_PLUS_4 0x12
+#define READ_LAT_PLUS_17_4 0x13
+#define READ_LAT_PLUS_9_2 0x14
+#define READ_LAT_PLUS_19_4 0x15
+
+#define CLOCK_DELAY_0 0x0
+#define CLOCK_DELAY_1_4 0x1
+#define CLOCK_DELAY_1_2 0x2
+#define CLOCK_DELAY_3_4 0x3
+#define CLOCK_DELAY_1 0x4
+#define CLOCK_DELAY_5_4 0x5
+#define CLOCK_DELAY_3_2 0x6
+
+/* DDR SDRAM Control Configuration */
+
+#define SREN_DISABLE 0x0
+#define SREN_ENABLE 0x1
+
+#define ECC_DISABLE 0x0
+#define ECC_ENABLE 0x1
+
+#define RD_DISABLE 0x0
+#define RD_ENABLE 0x1
+
+#define TYPE_DDR1 0x2
+#define TYPE_DDR2 0x3
+
+#define DYN_PWR_DISABLE 0x0
+#define DYN_PWR_ENABLE 0x1
+
+#define DATA_BUS_WIDTH_16 0x1
+#define DATA_BUS_WIDTH_32 0x2
+
+#define NCAP_DISABLE 0x0
+#define NCAP_ENABLE 0x1
+
+#define TIMING_1T 0x0
+#define TIMING_2T 0x1
+
+#define INTERLEAVE_NONE 0x0
+#define INTERLEAVE_1_AND_2 0x1
+
+#define PRECHARGE_MA_10 0x0
+#define PRECHARGE_MA_8 0x1
+
+#define STRENGTH_FULL 0x0
+#define STRENGTH_HALF 0x1
+
+#define INITIALIZATION_DONT_BYPASS 0x0
+#define INITIALIZATION_BYPASS 0x1
+
+/* DDR SDRAM Control Configuration 2 register */
+
+#define MODE_NORMAL 0x0
+#define MODE_REFRESH 0x1
+
+#define DLL_RESET_ENABLE 0x0
+#define DLL_RESET_DISABLE 0x1
+
+#define DQS_TRUE 0x0
+
+#define ODT_ASSERT_NEVER 0x0
+#define ODT_ASSERT_WRITES 0x1
+#define ODT_ASSERT_READS 0x2
+#define ODT_ASSERT_ALWAYS 0x3
+
+#endif