Merge branch 'master' of git://git.denx.de/u-boot-sunxi
trini: Disable CONFIG_SPL_USE_ARCH_MEMSET on orangepi_2
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e644ee3..7b20750 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -214,6 +214,10 @@
ARM_SOC_BOOT0_HOOK which contains the required assembler
preprocessor code.
+config ARM_CORTEX_CPU_IS_UP
+ bool
+ default n
+
config USE_ARCH_MEMCPY
bool "Use an assembly optimized implementation of memcpy"
default y
diff --git a/arch/arm/cpu/arm920t/interrupts.c b/arch/arm/cpu/arm920t/interrupts.c
deleted file mode 100644
index 0e04d36..0000000
--- a/arch/arm/cpu/arm920t/interrupts.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/proc-armv/ptrace.h>
-
-#if defined (CONFIG_ARCH_INTEGRATOR)
-void do_irq (struct pt_regs *pt_regs)
-{
- /* ASSUMED to be a timer interrupt */
- /* Just clear it - count handled in */
- /* integratorap.c */
- *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 0x0C) = 0;
-}
-#endif
diff --git a/arch/arm/cpu/arm920t/s3c24x0/interrupts.c b/arch/arm/cpu/arm920t/s3c24x0/interrupts.c
deleted file mode 100644
index 036e3b9..0000000
--- a/arch/arm/cpu/arm920t/s3c24x0/interrupts.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-
-#include <asm/arch/s3c24x0_cpu.h>
-#include <asm/proc-armv/ptrace.h>
-
-void do_irq (struct pt_regs *pt_regs)
-{
- struct s3c24x0_interrupt *irq = s3c24x0_get_base_interrupt();
- u_int32_t intpnd = readl(&irq->INTPND);
-
-}
diff --git a/arch/arm/cpu/armv7/ls102xa/psci.S b/arch/arm/cpu/armv7/ls102xa/psci.S
index 3d41d37..e1dc5f3 100644
--- a/arch/arm/cpu/armv7/ls102xa/psci.S
+++ b/arch/arm/cpu/armv7/ls102xa/psci.S
@@ -37,7 +37,7 @@
.align 5
-#define ONE_MS (GENERIC_TIMER_CLK / 1000)
+#define ONE_MS (COUNTER_FREQUENCY / 1000)
#define RESET_WAIT (30 * ONE_MS)
.globl psci_version
diff --git a/arch/arm/cpu/armv7/ls102xa/timer.c b/arch/arm/cpu/armv7/ls102xa/timer.c
index e6a32ca..d5237d21 100644
--- a/arch/arm/cpu/armv7/ls102xa/timer.c
+++ b/arch/arm/cpu/armv7/ls102xa/timer.c
@@ -62,7 +62,7 @@
/* Enable System Counter */
writel(SYS_COUNTER_CTRL_ENABLE, &sctr->cntcr);
- freq = GENERIC_TIMER_CLK;
+ freq = COUNTER_FREQUENCY;
asm("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
/* Set PL1 Physical Timer Ctrl */
diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S
index 95ce938..e39aba7 100644
--- a/arch/arm/cpu/armv7/nonsec_virt.S
+++ b/arch/arm/cpu/armv7/nonsec_virt.S
@@ -188,11 +188,11 @@
* we do this here instead.
* But first check if we have the generic timer.
*/
-#ifdef CONFIG_TIMER_CLK_FREQ
+#ifdef COUNTER_FREQUENCY
mrc p15, 0, r0, c0, c1, 1 @ read ID_PFR1
and r0, r0, #CPUID_ARM_GENTIMER_MASK @ mask arch timer bits
cmp r0, #(1 << CPUID_ARM_GENTIMER_SHIFT)
- ldreq r1, =CONFIG_TIMER_CLK_FREQ
+ ldreq r1, =COUNTER_FREQUENCY
mcreq p15, 0, r1, c14, c0, 0 @ write CNTFRQ
#endif
diff --git a/arch/arm/cpu/armv7/sunxi/psci.c b/arch/arm/cpu/armv7/sunxi/psci.c
index 766b8c7..104dc90 100644
--- a/arch/arm/cpu/armv7/sunxi/psci.c
+++ b/arch/arm/cpu/armv7/sunxi/psci.c
@@ -46,7 +46,7 @@
return val;
}
-#define ONE_MS (CONFIG_TIMER_CLK_FREQ / 1000)
+#define ONE_MS (COUNTER_FREQUENCY / 1000)
static void __secure __mdelay(u32 ms)
{
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index bc4dc2c..7378c88 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -302,6 +302,8 @@
sun8i-h3-orangepi-plus.dtb \
sun8i-h3-orangepi-plus2e.dtb \
sun8i-h3-nanopi-neo.dtb
+dtb-$(CONFIG_MACH_SUN50I_H5) += \
+ sun50i-h5-orangepi-pc2.dtb
dtb-$(CONFIG_MACH_SUN50I) += \
sun50i-a64-pine64-plus.dtb \
sun50i-a64-pine64.dtb
diff --git a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
new file mode 100644
index 0000000..de60f78
--- /dev/null
+++ b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
@@ -0,0 +1,147 @@
+/*
+ * Copyright (c) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3.dtsi"
+
+/ {
+ model = "OrangePi PC 2";
+ compatible = "xunlong,orangepi-pc-2", "allwinner,sun50i-h5";
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ enable-method = "psci";
+ };
+ cpu@1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ enable-method = "psci";
+ };
+ cpu@2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ enable-method = "psci";
+ };
+ cpu@3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ enable-method = "psci";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+
+ aliases {
+ serial0 = &uart0;
+ ethernet0 = &emac;
+ };
+
+ soc {
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+};
+
+&gic {
+ compatible = "arm,gic-400";
+};
+
+&mmc0 {
+ compatible = "allwinner,sun50i-h5-mmc",
+ "allwinner,sun50i-a64-mmc",
+ "allwinner,sun5i-a13-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 0>;
+ cd-inverted;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-mode = "rgmii";
+ phy = <&phy1>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
index 3f87672..1bfb48b 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
@@ -242,7 +242,7 @@
/* ahb_gate0 offsets */
#define AHB_GATE_OFFSET_USB_OHCI1 30
#define AHB_GATE_OFFSET_USB_OHCI0 29
-#ifdef CONFIG_MACH_SUN8I_H3
+#ifdef CONFIG_MACH_SUNXI_H3_H5
/*
* These are EHCI1 - EHCI3 in the datasheet (EHCI0 is for the OTG) we call
* them 0 - 2 like they were called on older SoCs.
@@ -293,7 +293,7 @@
#define CCM_USB_CTRL_PHY1_CLK (0x1 << 9)
#define CCM_USB_CTRL_PHY2_CLK (0x1 << 10)
#define CCM_USB_CTRL_PHY3_CLK (0x1 << 11)
-#ifdef CONFIG_MACH_SUN8I_H3
+#ifdef CONFIG_MACH_SUNXI_H3_H5
/*
* These are OHCI1 - OHCI3 in the datasheet (OHCI0 is for the OTG) we call
* them 0 - 2 like they were called on older SoCs.
diff --git a/arch/arm/include/asm/arch-sunxi/cpu.h b/arch/arm/include/asm/arch-sunxi/cpu.h
index 6f96a97..e8e670e 100644
--- a/arch/arm/include/asm/arch-sunxi/cpu.h
+++ b/arch/arm/include/asm/arch-sunxi/cpu.h
@@ -15,5 +15,6 @@
#define SOCID_A64 0x1689
#define SOCID_H3 0x1680
+#define SOCID_H5 0x1718
#endif /* _SUNXI_CPU_H */
diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
index 3c85222..ea672fe 100644
--- a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
+++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
@@ -56,7 +56,7 @@
#define SUNXI_USB2_BASE 0x01c1c000
#endif
#ifdef CONFIG_SUNXI_GEN_SUN6I
-#if defined(CONFIG_MACH_SUN8I_H3) || defined(CONFIG_MACH_SUN50I)
+#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I)
#define SUNXI_USBPHY_BASE 0x01c19000
#define SUNXI_USB0_BASE 0x01c1a000
#define SUNXI_USB1_BASE 0x01c1b000
@@ -94,7 +94,7 @@
#define SUNXI_KEYPAD_BASE 0x01c23000
#define SUNXI_TZPC_BASE 0x01c23400
-#if defined(CONFIG_MACH_SUN8I_A83T) || defined(CONFIG_MACH_SUN8I_H3) || \
+#if defined(CONFIG_MACH_SUN8I_A83T) || defined(CONFIG_MACH_SUNXI_H3_H5) || \
defined(CONFIG_MACH_SUN50I)
/* SID address space starts at 0x01c1400, but e-fuse is at offset 0x200 */
#define SUNXI_SIDC_BASE 0x01c14000
diff --git a/arch/arm/include/asm/arch-sunxi/dram.h b/arch/arm/include/asm/arch-sunxi/dram.h
index 53e6d47..1dc8220 100644
--- a/arch/arm/include/asm/arch-sunxi/dram.h
+++ b/arch/arm/include/asm/arch-sunxi/dram.h
@@ -24,7 +24,7 @@
#include <asm/arch/dram_sun8i_a33.h>
#elif defined(CONFIG_MACH_SUN8I_A83T)
#include <asm/arch/dram_sun8i_a83t.h>
-#elif defined(CONFIG_MACH_SUN8I_H3) || defined(CONFIG_MACH_SUN50I)
+#elif defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I)
#include <asm/arch/dram_sun8i_h3.h>
#elif defined(CONFIG_MACH_SUN9I)
#include <asm/arch/dram_sun9i.h>
diff --git a/arch/arm/include/asm/arch-sunxi/spl.h b/arch/arm/include/asm/arch-sunxi/spl.h
index 5d7ab55..831d0c0 100644
--- a/arch/arm/include/asm/arch-sunxi/spl.h
+++ b/arch/arm/include/asm/arch-sunxi/spl.h
@@ -12,7 +12,7 @@
#define SPL_SIGNATURE "SPL" /* marks "sunxi" SPL header */
#define SPL_HEADER_VERSION 1
-#if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I)
+#ifdef CONFIG_SUNXI_HIGH_SRAM
#define SPL_ADDR 0x10000
#else
#define SPL_ADDR 0x0
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 7daba11..efab481 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -48,7 +48,7 @@
obj-$(CONFIG_MACH_SUN8I_A23) += dram_sun8i_a23.o
obj-$(CONFIG_MACH_SUN8I_A33) += dram_sun8i_a33.o
obj-$(CONFIG_MACH_SUN8I_A83T) += dram_sun8i_a83t.o
-obj-$(CONFIG_MACH_SUN8I_H3) += dram_sun8i_h3.o
+obj-$(CONFIG_MACH_SUNXI_H3_H5) += dram_sun8i_h3.o
obj-$(CONFIG_MACH_SUN9I) += dram_sun9i.o
obj-$(CONFIG_MACH_SUN50I) += dram_sun8i_h3.o
endif
diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
index 52be5b0..5e03d03 100644
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@@ -40,7 +40,7 @@
struct fel_stash fel_stash __attribute__((section(".data")));
-#ifdef CONFIG_MACH_SUN50I
+#ifdef CONFIG_ARM64
#include <asm/armv8/mmu.h>
static struct mm_region sunxi_mem_map[] = {
@@ -98,7 +98,7 @@
sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN8I_A33_GPB_UART0);
sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_A33_GPB_UART0);
sunxi_gpio_set_pull(SUNXI_GPB(1), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_H3)
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUNXI_H3_H5)
sunxi_gpio_set_cfgpin(SUNXI_GPA(4), SUN8I_H3_GPA_UART0);
sunxi_gpio_set_cfgpin(SUNXI_GPA(5), SUN8I_H3_GPA_UART0);
sunxi_gpio_set_pull(SUNXI_GPA(5), SUNXI_GPIO_PULL_UP);
@@ -180,15 +180,13 @@
/* No H3 BSP, boot0 seems to not modify SUNXI_SRAMC_BASE + 0x44 */
#endif
-#if defined CONFIG_MACH_SUN6I || \
- defined CONFIG_MACH_SUN7I || \
- defined CONFIG_MACH_SUN8I || \
- defined CONFIG_MACH_SUN9I
+#if !defined(CONFIG_ARM_CORTEX_CPU_IS_UP) && !defined(CONFIG_ARM64)
/* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
asm volatile(
"mrc p15, 0, r0, c1, c0, 1\n"
"orr r0, r0, #1 << 6\n"
- "mcr p15, 0, r0, c1, c0, 1\n");
+ "mcr p15, 0, r0, c1, c0, 1\n"
+ ::: "r0");
#endif
#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I_H3
/* Enable non-secure access to some peripherals */
diff --git a/arch/arm/mach-sunxi/clock_sun6i.c b/arch/arm/mach-sunxi/clock_sun6i.c
index d123b3a..4762fbf 100644
--- a/arch/arm/mach-sunxi/clock_sun6i.c
+++ b/arch/arm/mach-sunxi/clock_sun6i.c
@@ -22,7 +22,7 @@
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-#if !defined(CONFIG_MACH_SUN8I_H3) && !defined(CONFIG_MACH_SUN50I)
+#if !defined(CONFIG_MACH_SUNXI_H3_H5) && !defined(CONFIG_MACH_SUN50I)
struct sunxi_prcm_reg * const prcm =
(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
@@ -51,7 +51,7 @@
void clock_init_sec(void)
{
-#ifdef CONFIG_MACH_SUN8I_H3
+#ifdef CONFIG_MACH_SUNXI_H3_H5
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
@@ -152,7 +152,7 @@
const int max_n = 32;
int k = 1, m = 2;
-#ifdef CONFIG_MACH_SUN8I_H3
+#ifdef CONFIG_MACH_SUNXI_H3_H5
clrsetbits_le32(&ccm->pll5_tuning_cfg, CCM_PLL5_TUN_LOCK_TIME_MASK |
CCM_PLL5_TUN_INIT_FREQ_MASK,
CCM_PLL5_TUN_LOCK_TIME(2) | CCM_PLL5_TUN_INIT_FREQ(16));
diff --git a/arch/arm/mach-sunxi/cpu_info.c b/arch/arm/mach-sunxi/cpu_info.c
index f1f6fd5..85633cc 100644
--- a/arch/arm/mach-sunxi/cpu_info.c
+++ b/arch/arm/mach-sunxi/cpu_info.c
@@ -91,6 +91,8 @@
puts("CPU: Allwinner A80 (SUN9I)\n");
#elif defined CONFIG_MACH_SUN50I
puts("CPU: Allwinner A64 (SUN50I)\n");
+#elif defined CONFIG_MACH_SUN50I_H5
+ puts("CPU: Allwinner H5 (SUN50I)\n");
#else
#warning Please update cpu_info.c with correct CPU information
puts("CPU: SUNXI Family\n");
diff --git a/arch/arm/mach-sunxi/dram_sun8i_h3.c b/arch/arm/mach-sunxi/dram_sun8i_h3.c
index 9f7cc7f..d681a9d 100644
--- a/arch/arm/mach-sunxi/dram_sun8i_h3.c
+++ b/arch/arm/mach-sunxi/dram_sun8i_h3.c
@@ -177,6 +177,34 @@
writel(0x81000004, &mctl_com->mdfs_bwlr[2]);
}
+static void mctl_set_master_priority_h5(void)
+{
+ struct sunxi_mctl_com_reg * const mctl_com =
+ (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+ /* enable bandwidth limit windows and set windows size 1us */
+ writel(399, &mctl_com->tmr);
+ writel((1 << 16), &mctl_com->bwcr);
+
+ /* set cpu high priority */
+ writel(0x00000001, &mctl_com->mapr);
+
+ /* Port 2 is reserved per Allwinner's linux-3.10 source, yet
+ * they initialise it */
+ MBUS_CONF( CPU, true, HIGHEST, 0, 300, 260, 150);
+ MBUS_CONF( GPU, true, HIGHEST, 0, 600, 400, 200);
+ MBUS_CONF(UNUSED, true, HIGHEST, 0, 512, 256, 96);
+ MBUS_CONF( DMA, true, HIGHEST, 0, 256, 128, 32);
+ MBUS_CONF( VE, true, HIGHEST, 0, 1900, 1500, 1000);
+ MBUS_CONF( CSI, true, HIGHEST, 0, 150, 120, 100);
+ MBUS_CONF( NAND, true, HIGH, 0, 256, 128, 64);
+ MBUS_CONF( SS, true, HIGHEST, 0, 256, 128, 64);
+ MBUS_CONF( TS, true, HIGHEST, 0, 256, 128, 64);
+ MBUS_CONF( DI, true, HIGH, 0, 1024, 256, 64);
+ MBUS_CONF( DE, true, HIGHEST, 3, 3400, 2400, 1024);
+ MBUS_CONF(DE_CFD, true, HIGHEST, 0, 600, 400, 200);
+}
+
static void mctl_set_master_priority(uint16_t socid)
{
switch (socid) {
@@ -186,6 +214,9 @@
case SOCID_A64:
mctl_set_master_priority_a64();
return;
+ case SOCID_H5:
+ mctl_set_master_priority_h5();
+ return;
}
}
@@ -256,7 +287,7 @@
/* set two rank timing */
clrsetbits_le32(&mctl_ctl->dramtmg[8], (0xff << 8) | (0xff << 0),
- (0x66 << 8) | (0x10 << 0));
+ ((socid == SOCID_H5 ? 0x33 : 0x66) << 8) | (0x10 << 0));
/* set PHY interface timing, write latency and read latency configure */
writel((0x2 << 24) | (t_rdata_en << 16) | (0x1 << 8) |
@@ -391,7 +422,7 @@
CCM_DRAMCLK_CFG_DIV(1) |
CCM_DRAMCLK_CFG_SRC_PLL11 |
CCM_DRAMCLK_CFG_UPD);
- } else if (socid == SOCID_H3) {
+ } else if (socid == SOCID_H3 || socid == SOCID_H5) {
clock_set_pll5(CONFIG_DRAM_CLK * 2 * 1000000, false);
clrsetbits_le32(&ccm->dram_clk_cfg,
CCM_DRAMCLK_CFG_DIV_MASK |
@@ -410,7 +441,7 @@
setbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_RST);
udelay(10);
- writel(0xc00e, &mctl_ctl->clken);
+ writel(socid == SOCID_H5 ? 0x8000 : 0xc00e, &mctl_ctl->clken);
udelay(500);
}
@@ -434,7 +465,10 @@
/* setting VTC, default disable all VT */
clrbits_le32(&mctl_ctl->pgcr[0], (1 << 30) | 0x3f);
- clrsetbits_le32(&mctl_ctl->pgcr[1], 1 << 24, 1 << 26);
+ if (socid == SOCID_H5)
+ setbits_le32(&mctl_ctl->pgcr[1], (1 << 24) | (1 << 26));
+ else
+ clrsetbits_le32(&mctl_ctl->pgcr[1], 1 << 24, 1 << 26);
/* increase DFI_PHY_UPD clock */
writel(PROTECT_MAGIC, &mctl_com->protect);
@@ -444,15 +478,22 @@
udelay(100);
/* set dramc odt */
- for (i = 0; i < 4; i++)
- clrsetbits_le32(&mctl_ctl->dx[i].gcr, (0x3 << 4) |
- (0x1 << 1) | (0x3 << 2) | (0x3 << 12) |
- (0x3 << 14),
- IS_ENABLED(CONFIG_DRAM_ODT_EN) ?
- DX_GCR_ODT_DYNAMIC : DX_GCR_ODT_OFF);
+ for (i = 0; i < 4; i++) {
+ u32 clearmask = (0x3 << 4) | (0x1 << 1) | (0x3 << 2) |
+ (0x3 << 12) | (0x3 << 14);
+ u32 setmask = IS_ENABLED(CONFIG_DRAM_ODT_EN) ?
+ DX_GCR_ODT_DYNAMIC : DX_GCR_ODT_OFF;
+
+ if (socid == SOCID_H5) {
+ clearmask |= 0x2 << 8;
+ setmask |= 0x4 << 8;
+ }
+ clrsetbits_le32(&mctl_ctl->dx[i].gcr, clearmask, setmask);
+ }
/* AC PDR should always ON */
- setbits_le32(&mctl_ctl->aciocr, 0x1 << 1);
+ clrsetbits_le32(&mctl_ctl->aciocr, socid == SOCID_H5 ? (0x1 << 11) : 0,
+ 0x1 << 1);
/* set DQS auto gating PD mode */
setbits_le32(&mctl_ctl->pgcr[2], 0x3 << 6);
@@ -464,7 +505,7 @@
/* dphy & aphy phase select 270 degree */
clrsetbits_le32(&mctl_ctl->pgcr[2], (0x3 << 10) | (0x3 << 8),
(0x1 << 10) | (0x2 << 8));
- } else if (socid == SOCID_A64) {
+ } else if (socid == SOCID_A64 || socid == SOCID_H5) {
/* dphy & aphy phase select ? */
clrsetbits_le32(&mctl_ctl->pgcr[2], (0x3 << 10) | (0x3 << 8),
(0x0 << 10) | (0x3 << 8));
@@ -488,11 +529,12 @@
mctl_phy_init(PIR_PLLINIT | PIR_DCAL | PIR_PHYRST |
PIR_DRAMRST | PIR_DRAMINIT | PIR_QSGATE);
- } else if (socid == SOCID_A64) {
+ } else if (socid == SOCID_A64 || socid == SOCID_H5) {
clrsetbits_le32(&mctl_ctl->zqcr, 0xffffff, CONFIG_DRAM_ZQ);
mctl_phy_init(PIR_ZCAL | PIR_PLLINIT | PIR_DCAL | PIR_PHYRST |
PIR_DRAMRST | PIR_DRAMINIT | PIR_QSGATE);
+ /* no PIR_QSGATE for H5 ???? */
}
/* detect ranks and bus width */
@@ -533,7 +575,7 @@
/* set PGCR3, CKE polarity */
if (socid == SOCID_H3)
writel(0x00aa0060, &mctl_ctl->pgcr[3]);
- else if (socid == SOCID_A64)
+ else if (socid == SOCID_A64 || socid == SOCID_H5)
writel(0xc0aa0060, &mctl_ctl->pgcr[3]);
/* power down zq calibration module for power save */
@@ -604,6 +646,22 @@
3, 4, 0, 3, 4, 1, 4, 0, \
1, 1, 0, 1, 13, 5, 4 }
+#define SUN8I_H5_DX_READ_DELAYS \
+ {{ 14, 15, 17, 17, 17, 17, 17, 18, 17, 3, 3 }, \
+ { 21, 21, 12, 22, 21, 21, 21, 21, 21, 3, 3 }, \
+ { 16, 19, 19, 17, 22, 22, 21, 22, 19, 3, 3 }, \
+ { 21, 21, 22, 22, 20, 21, 19, 19, 19, 3, 3 } }
+#define SUN8I_H5_DX_WRITE_DELAYS \
+ {{ 1, 2, 3, 4, 3, 4, 4, 4, 6, 6, 6 }, \
+ { 6, 6, 6, 5, 5, 5, 5, 5, 6, 6, 6 }, \
+ { 0, 2, 4, 2, 6, 5, 5, 5, 6, 6, 6 }, \
+ { 3, 3, 3, 2, 2, 1, 1, 1, 4, 4, 4 } }
+#define SUN8I_H5_AC_DELAYS \
+ { 0, 0, 5, 5, 0, 0, 0, 0, \
+ 0, 0, 0, 0, 3, 3, 3, 3, \
+ 3, 3, 3, 3, 3, 3, 3, 3, \
+ 3, 3, 3, 3, 2, 0, 0 }
+
unsigned long sunxi_dram_init(void)
{
struct sunxi_mctl_com_reg * const mctl_com =
@@ -625,6 +683,10 @@
.dx_read_delays = SUN50I_A64_DX_READ_DELAYS,
.dx_write_delays = SUN50I_A64_DX_WRITE_DELAYS,
.ac_delays = SUN50I_A64_AC_DELAYS,
+#elif defined(CONFIG_MACH_SUN50I_H5)
+ .dx_read_delays = SUN8I_H5_DX_READ_DELAYS,
+ .dx_write_delays = SUN8I_H5_DX_WRITE_DELAYS,
+ .ac_delays = SUN8I_H5_AC_DELAYS,
#endif
};
/*
@@ -636,6 +698,8 @@
uint16_t socid = SOCID_H3;
#elif defined(CONFIG_MACH_SUN50I)
uint16_t socid = SOCID_A64;
+#elif defined(CONFIG_MACH_SUN50I_H5)
+ uint16_t socid = SOCID_H5;
#endif
mctl_sys_init(socid, ¶);
@@ -652,8 +716,9 @@
if (socid == SOCID_H3)
writel(0x0c000400, &mctl_ctl->odtcfg);
- if (socid == SOCID_A64) {
- setbits_le32(&mctl_ctl->vtfcr, 2 << 8);
+ if (socid == SOCID_A64 || socid == SOCID_H5) {
+ setbits_le32(&mctl_ctl->vtfcr,
+ (socid == SOCID_H5 ? 3 : 2) << 8);
clrbits_le32(&mctl_ctl->pgcr[2], (1 << 13));
}
diff --git a/arch/arm/mach-sunxi/usb_phy.c b/arch/arm/mach-sunxi/usb_phy.c
index 278587b..9bf0b56 100644
--- a/arch/arm/mach-sunxi/usb_phy.c
+++ b/arch/arm/mach-sunxi/usb_phy.c
@@ -146,10 +146,10 @@
}
}
-#if defined(CONFIG_MACH_SUN8I_H3) || defined(CONFIG_MACH_SUN50I)
+#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I)
static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
{
-#if defined CONFIG_MACH_SUN8I_H3
+#if defined CONFIG_MACH_SUNXI_H3_H5
if (phy->id == 0)
clrbits_le32(SUNXI_USBPHY_BASE + REG_PHY_UNK_H3, 0x01);
#endif
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 37b4252..3e0e262 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -27,6 +27,17 @@
config SPL_SERIAL_SUPPORT
default y
+config SUNXI_HIGH_SRAM
+ bool
+ default n
+ ---help---
+ Older Allwinner SoCs have their mask boot ROM mapped just below 4GB,
+ with the first SRAM region being located at address 0.
+ Some newer SoCs map the boot ROM at address 0 instead and move the
+ SRAM to 64KB, just behind the mask ROM.
+ Chips using the latter setup are supposed to select this option to
+ adjust the addresses accordingly.
+
# Note only one of these may be selected at a time! But hidden choices are
# not supported by Kconfig
config SUNXI_GEN_SUN4I
@@ -43,6 +54,11 @@
watchdog, etc.
+config MACH_SUNXI_H3_H5
+ bool
+ select SUNXI_GEN_SUN6I
+ select SUPPORT_SPL
+
choice
prompt "Sunxi SoC Variant"
optional
@@ -50,12 +66,14 @@
config MACH_SUN4I
bool "sun4i (Allwinner A10)"
select CPU_V7
+ select ARM_CORTEX_CPU_IS_UP
select SUNXI_GEN_SUN4I
select SUPPORT_SPL
config MACH_SUN5I
bool "sun5i (Allwinner A13)"
select CPU_V7
+ select ARM_CORTEX_CPU_IS_UP
select SUNXI_GEN_SUN4I
select SUPPORT_SPL
@@ -111,13 +129,13 @@
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
- select SUNXI_GEN_SUN6I
- select SUPPORT_SPL
+ select MACH_SUNXI_H3_H5
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
config MACH_SUN9I
bool "sun9i (Allwinner A80)"
select CPU_V7
+ select SUNXI_HIGH_SRAM
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
@@ -125,14 +143,21 @@
bool "sun50i (Allwinner A64)"
select ARM64
select SUNXI_GEN_SUN6I
+ select SUNXI_HIGH_SRAM
select SUPPORT_SPL
+config MACH_SUN50I_H5
+ bool "sun50i (Allwinner H5)"
+ select ARM64
+ select MACH_SUNXI_H3_H5
+ select SUNXI_HIGH_SRAM
+
endchoice
# The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
config MACH_SUN8I
bool
- default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_H3 || MACH_SUN8I_A83T
+ default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUNXI_H3_H5 || MACH_SUN8I_A83T
config RESERVE_ALLWINNER_BOOT0_HEADER
bool "reserve space for Allwinner boot0 header"
@@ -320,7 +345,7 @@
config MMC0_CD_PIN
string "Card detect pin for mmc0"
- default "PF6" if MACH_SUN8I_A83T || MACH_SUN8I_H3 || MACH_SUN50I
+ default "PF6" if MACH_SUN8I_A83T || MACH_SUNXI_H3_H5 || MACH_SUN50I
default ""
---help---
Set the card detect pin for mmc0, leave empty to not use cd. This
@@ -485,7 +510,7 @@
config VIDEO
bool "Enable graphical uboot console on HDMI, LCD or VGA"
- depends on !MACH_SUN8I_A83T && !MACH_SUN8I_H3 && !MACH_SUN9I && !MACH_SUN50I
+ depends on !MACH_SUN8I_A83T && !MACH_SUNXI_H3_H5 && !MACH_SUN9I && !MACH_SUN50I
default y
---help---
Say Y here to add support for using a cfb console on the HDMI, LCD
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 2321b8b..3f21129 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -242,6 +242,11 @@
S: Maintained
F: configs/orangepi_zero_defconfig
+ORANGEPI PC 2 BOARD
+M: Andre Przywara <andre.przywara@arm.com>
+S: Maintained
+F: configs/orangepi_pc2_defconfig
+
R16 EVB PARROT BOARD
M: Quentin Schulz <quentin.schulz@free-electrons.com>
S: Maintained
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 5365638..b966012 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -100,14 +100,14 @@
* we avoid the risk of writing to it.
*/
asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r"(freq));
- if (freq != CONFIG_TIMER_CLK_FREQ) {
+ if (freq != COUNTER_FREQUENCY) {
debug("arch timer frequency is %d Hz, should be %d, fixing ...\n",
- freq, CONFIG_TIMER_CLK_FREQ);
+ freq, COUNTER_FREQUENCY);
#ifdef CONFIG_NON_SECURE
printf("arch timer frequency is wrong, but cannot adjust it\n");
#else
asm volatile("mcr p15, 0, %0, c14, c0, 0"
- : : "r"(CONFIG_TIMER_CLK_FREQ));
+ : : "r"(COUNTER_FREQUENCY));
#endif
}
}
diff --git a/configs/orangepi_2_defconfig b/configs/orangepi_2_defconfig
index e14cb9d..201771e 100644
--- a/configs/orangepi_2_defconfig
+++ b/configs/orangepi_2_defconfig
@@ -1,4 +1,5 @@
CONFIG_ARM=y
+# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=672
diff --git a/configs/orangepi_pc2_defconfig b/configs/orangepi_pc2_defconfig
new file mode 100644
index 0000000..19a5c2b
--- /dev/null
+++ b/configs/orangepi_pc2_defconfig
@@ -0,0 +1,19 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN50I_H5=y
+CONFIG_SPL=y
+CONFIG_DRAM_CLK=672
+CONFIG_DRAM_ZQ=3881977
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-orangepi-pc2"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_CONSOLE_MUX=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SUN8I_EMAC=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_SPL_SPI_SUNXI=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig
index 1f23c8e..5ca0a71 100644
--- a/drivers/mtd/spi/Kconfig
+++ b/drivers/mtd/spi/Kconfig
@@ -132,7 +132,7 @@
config SPL_SPI_SUNXI
bool "Support for SPI Flash on Allwinner SoCs in SPL"
- depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I_H3 || MACH_SUN50I
+ depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I
---help---
Enable support for SPI Flash. This option allows SPL to read from
sunxi SPI Flash. It uses the same method as the boot ROM, so does
diff --git a/drivers/mtd/spi/sunxi_spi_spl.c b/drivers/mtd/spi/sunxi_spi_spl.c
index a24c115..852abd4 100644
--- a/drivers/mtd/spi/sunxi_spi_spl.c
+++ b/drivers/mtd/spi/sunxi_spi_spl.c
@@ -185,14 +185,14 @@
#define SPI_READ_MAX_SIZE 60 /* FIFO size, minus 4 bytes of the header */
static void sunxi_spi0_read_data(u8 *buf, u32 addr, u32 bufsize,
- u32 spi_ctl_reg,
- u32 spi_ctl_xch_bitmask,
- u32 spi_fifo_reg,
- u32 spi_tx_reg,
- u32 spi_rx_reg,
- u32 spi_bc_reg,
- u32 spi_tc_reg,
- u32 spi_bcc_reg)
+ ulong spi_ctl_reg,
+ ulong spi_ctl_xch_bitmask,
+ ulong spi_fifo_reg,
+ ulong spi_tx_reg,
+ ulong spi_rx_reg,
+ ulong spi_bc_reg,
+ ulong spi_tc_reg,
+ ulong spi_bcc_reg)
{
writel(4 + bufsize, spi_bc_reg); /* Burst counter (total bytes) */
writel(4, spi_tc_reg); /* Transfer counter (bytes to send) */
diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c
index b87210b..abdfada 100644
--- a/drivers/net/sun8i_emac.c
+++ b/drivers/net/sun8i_emac.c
@@ -62,7 +62,7 @@
#define AHB_GATE_OFFSET_EPHY 0
-#if defined(CONFIG_MACH_SUN8I_H3)
+#if defined(CONFIG_MACH_SUNXI_H3_H5)
#define SUN8I_GPD8_GMAC 2
#else
#define SUN8I_GPD8_GMAC 4
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index f2c5629..64e5bc2 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -12,7 +12,7 @@
default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33
default AXP818_POWER if MACH_SUN8I_A83T
- default SUNXI_NO_PMIC if MACH_SUN8I_H3 || MACH_SUN50I
+ default SUNXI_NO_PMIC if MACH_SUNXI_H3_H5 || MACH_SUN50I
config SUNXI_NO_PMIC
bool "board without a pmic"
@@ -60,7 +60,7 @@
config SY8106A_POWER
bool "SY8106A pmic support"
- depends on MACH_SUN8I_H3
+ depends on MACH_SUNXI_H3_H5
---help---
Select this to enable support for the SY8106A pmic found on some
H3 boards.
diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c
index 5bb97ff..068f24f 100644
--- a/drivers/usb/host/ehci-sunxi.c
+++ b/drivers/usb/host/ehci-sunxi.c
@@ -45,7 +45,7 @@
* clocks resp. phys.
*/
priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0;
-#if defined(CONFIG_MACH_SUN8I_H3) || defined(CONFIG_MACH_SUN50I)
+#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I)
extra_ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_OHCI0;
#endif
priv->phy_index = ((uintptr_t)hccr - SUNXI_USB1_BASE) / BASE_DIST;
diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h
index b4f7530..ade66a4 100644
--- a/include/configs/exynos-common.h
+++ b/include/configs/exynos-common.h
@@ -23,7 +23,7 @@
/* input clock of PLL: 24MHz input clock */
#define CONFIG_SYS_CLK_FREQ 24000000
-#define CONFIG_TIMER_CLK_FREQ CONFIG_SYS_CLK_FREQ
+#define COUNTER_FREQUENCY CONFIG_SYS_CLK_FREQ
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_CMDLINE_TAG
diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h
index db29fa2b..dfb7238 100644
--- a/include/configs/ls1021aiot.h
+++ b/include/configs/ls1021aiot.h
@@ -36,11 +36,6 @@
#define CONFIG_CMD_EXT2
#endif
-/*
- * Generic Timer Definitions
- */
-#define GENERIC_TIMER_CLK 12500000
-
#define CONFIG_SYS_CLK_FREQ 100000000
#define CONFIG_DDR_CLK_FREQ 100000000
@@ -243,7 +238,7 @@
#define CONFIG_PEN_ADDR_BIG_ENDIAN
#define CONFIG_LAYERSCAPE_NS_ACCESS
#define CONFIG_SMP_PEN_ADDR 0x01ee0200
-#define CONFIG_TIMER_CLK_FREQ 12500000
+#define COUNTER_FREQUENCY 12500000
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 256
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 4fb8b0c..15850f2 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -27,11 +27,6 @@
#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE
-/*
- * Generic Timer Definitions
- */
-#define GENERIC_TIMER_CLK 12500000
-
#ifndef __ASSEMBLY__
unsigned long get_board_sys_clk(void);
unsigned long get_board_ddr_clk(void);
@@ -500,7 +495,7 @@
#define CONFIG_PEN_ADDR_BIG_ENDIAN
#define CONFIG_LAYERSCAPE_NS_ACCESS
#define CONFIG_SMP_PEN_ADDR 0x01ee0200
-#define CONFIG_TIMER_CLK_FREQ 12500000
+#define COUNTER_FREQUENCY 12500000
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 256
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index c6438d5..5d6a64a 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -56,11 +56,6 @@
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#endif
-/*
- * Generic Timer Definitions
- */
-#define GENERIC_TIMER_CLK 12500000
-
#define CONFIG_SYS_CLK_FREQ 100000000
#define CONFIG_DDR_CLK_FREQ 100000000
@@ -370,7 +365,7 @@
#define CONFIG_PEN_ADDR_BIG_ENDIAN
#define CONFIG_LAYERSCAPE_NS_ACCESS
#define CONFIG_SMP_PEN_ADDR 0x01ee0200
-#define CONFIG_TIMER_CLK_FREQ 12500000
+#define COUNTER_FREQUENCY 12500000
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 256
diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h
index 5bf8ad7..e2b05ca 100644
--- a/include/configs/mx7_common.h
+++ b/include/configs/mx7_common.h
@@ -21,7 +21,7 @@
#define CONFIG_MXC_GPT_HCLK
#define CONFIG_SYSCOUNTER_TIMER
#define CONFIG_SC_TIMER_CLK 8000000 /* 8Mhz */
-#define CONFIG_TIMER_CLK_FREQ CONFIG_SC_TIMER_CLK
+#define COUNTER_FREQUENCY CONFIG_SC_TIMER_CLK
#define CONFIG_SYS_FSL_CLK
#define CONFIG_SYS_BOOTM_LEN 0x1000000
diff --git a/include/configs/sun50i.h b/include/configs/sun50i.h
index 3e5708b..1b7bfb6 100644
--- a/include/configs/sun50i.h
+++ b/include/configs/sun50i.h
@@ -18,7 +18,6 @@
#define CONFIG_SUNXI_USB_PHYS 1
-#define COUNTER_FREQUENCY CONFIG_TIMER_CLK_FREQ
#define GICD_BASE 0x1c81000
#define GICC_BASE 0x1c82000
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 05ea172..377ae00 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -46,7 +46,7 @@
#endif
/* CPU */
-#define CONFIG_TIMER_CLK_FREQ 24000000
+#define COUNTER_FREQUENCY 24000000
/*
* The DRAM Base differs between some models. We cannot use macros for the
@@ -79,7 +79,7 @@
#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */
-#if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I)
+#ifdef CONFIG_SUNXI_HIGH_SRAM
/*
* The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is
* slightly bigger. Note that it is possible to map the first 32 KiB of the
@@ -175,32 +175,24 @@
#define CONFIG_SPL_BOARD_LOAD_IMAGE
#endif
-#if defined(CONFIG_MACH_SUN9I)
+#ifdef CONFIG_SUNXI_HIGH_SRAM
#define CONFIG_SPL_TEXT_BASE 0x10040 /* sram start+header */
-#define CONFIG_SPL_MAX_SIZE 0x5fc0 /* ? KiB on sun9i */
-#elif defined(CONFIG_MACH_SUN50I)
-#define CONFIG_SPL_TEXT_BASE 0x10040 /* sram start+header */
-#define CONFIG_SPL_MAX_SIZE 0x7fc0 /* 32 KiB on sun50i */
+#define CONFIG_SPL_MAX_SIZE 0x7fc0 /* 32 KiB */
+#define LOW_LEVEL_SRAM_STACK 0x00018000
#else
#define CONFIG_SPL_TEXT_BASE 0x40 /* sram start+header */
#define CONFIG_SPL_MAX_SIZE 0x5fc0 /* 24KB on sun4i/sun7i */
+#define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */
#endif
+#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
+
#ifndef CONFIG_ARM64
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds"
#endif
#define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */
-#if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I)
-/* FIXME: 40 KiB instead of 32 KiB ? */
-#define LOW_LEVEL_SRAM_STACK 0x00018000
-#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
-#else
-/* end of 32 KiB in sram */
-#define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */
-#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
-#endif
/* I2C */
#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 7fdab58..811ba91 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -6305,7 +6305,6 @@
CONFIG_TI816X_USE_EMIF0
CONFIG_TI816X_USE_EMIF1
CONFIG_TI81XX
-CONFIG_TIMER_CLK_FREQ
CONFIG_TIMESTAMP
CONFIG_TIZEN
CONFIG_TI_KEYSTONE_SERDES