Squashed 'dts/upstream/' content from commit aaba2d45dc2a

git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/riscv/allwinner/sun20i-d1-nezha.dts b/src/riscv/allwinner/sun20i-d1-nezha.dts
new file mode 100644
index 0000000..8dbe717
--- /dev/null
+++ b/src/riscv/allwinner/sun20i-d1-nezha.dts
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org>
+
+/*
+ * gpio line names
+ *
+ * The Nezha-D1 has a 40-pin IO header. Some of these pins are routed
+ * directly to pads on the SoC, others come from an 8-bit pcf857x IO
+ * expander. Therefore, these line names are specified in two places:
+ * one set for the pcf857x, and one set for the pio controller.
+ *
+ * Lines which are routed to the 40-pin header are named as follows:
+ *	<pin#> [<pin name>]
+ * where:
+ *	<pin#>		is the actual pin number of the 40-pin header
+ *	<pin name>	is the name of the pin by function/gpio#
+ *
+ * For details regarding pin numbers and names see the schematics (under
+ * "IO EXPAND"):
+ * http://dl.linux-sunxi.org/D1/D1_Nezha_development_board_schematic_diagram_20210224.pdf
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/dts-v1/;
+
+#include "sun20i-d1.dtsi"
+#include "sun20i-common-regulators.dtsi"
+
+/ {
+	model = "Allwinner D1 Nezha";
+	compatible = "allwinner,d1-nezha", "allwinner,sun20i-d1";
+
+	aliases {
+		ethernet0 = &emac;
+		ethernet1 = &xr829;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_usbvbus: usbvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbvbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
+		enable-active-high;
+		vin-supply = <&reg_vcc>;
+	};
+
+	/*
+	 * This regulator is PWM-controlled, but the PWM controller is not
+	 * yet supported, so fix the regulator to its default voltage.
+	 */
+	reg_vdd_cpu: vdd-cpu {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpu";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&reg_vcc>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpu>;
+};
+
+&dcxo {
+	clock-frequency = <24000000>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-0 = <&rgmii_pe_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_vcc_3v3>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pb0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pcf8574a: gpio@38 {
+		compatible = "nxp,pcf8574a";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <1 2 IRQ_TYPE_LEVEL_LOW>; /* PB2 */
+		interrupt-controller;
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		gpio-line-names =
+			"pin13 [gpio8]",
+			"pin16 [gpio10]",
+			"pin18 [gpio11]",
+			"pin26 [gpio17]",
+			"pin22 [gpio14]",
+			"pin28 [gpio19]",
+			"pin37 [gpio23]",
+			"pin11 [gpio6]";
+	};
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	disable-wp;
+	vmmc-supply = <&reg_vcc_3v3>;
+	vqmmc-supply = <&reg_vcc_3v3>;
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	vmmc-supply = <&reg_vcc_3v3>;
+	vqmmc-supply = <&reg_vcc_3v3>;
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	xr829: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb8_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	uart-has-rtscts;
+	pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* XR829 bluetooth is connected here */
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 3 21 GPIO_ACTIVE_HIGH>; /* PD21 */
+	usb0_vbus_det-gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+	usb0_vbus-supply = <&reg_usbvbus>;
+	usb1_vbus-supply = <&reg_vcc>;
+	status = "okay";
+};
+
+&pio {
+	gpio-line-names =
+		/* Port A */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* Port B */
+		"pin5 [gpio2/twi2-sck]",
+		"pin3 [gpio1/twi2-sda]",
+		"",
+		"pin38 [gpio24/i2s2-din]",
+		"pin40 [gpio25/i2s2-dout]",
+		"pin12 [gpio7/i2s-clk]",
+		"pin35 [gpio22/i2s2-lrck]",
+		"",
+		"pin8 [gpio4/uart0-txd]",
+		"pin10 [gpio5/uart0-rxd]",
+		"",
+		"",
+		"pin15 [gpio9]",
+		"", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* Port C */
+		"",
+		"pin31 [gpio21]",
+		"", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* Port D */
+		"", "", "", "", "", "", "", "",
+		"", "",
+		"pin24 [gpio16/spi1-ce0]",
+		"pin23 [gpio15/spi1-clk]",
+		"pin19 [gpio12/spi1-mosi]",
+		"pin21 [gpio13/spi1-miso]",
+		"pin27 [gpio18/spi1-hold]",
+		"pin29 [gpio20/spi1-wp]",
+		"", "", "", "", "", "",
+		"pin7 [gpio3/pwm]";
+};