Squashed 'dts/upstream/' content from commit aaba2d45dc2a

git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/powerpc/xpedite5200.dts b/src/powerpc/xpedite5200.dts
new file mode 100644
index 0000000..74b346f
--- /dev/null
+++ b/src/powerpc/xpedite5200.dts
@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2009 Extreme Engineering Solutions, Inc.
+ * Based on TQM8548 device tree
+ *
+ * XPedite5200 PrPMC/XMC module based on MPC8548E
+ */
+
+/dts-v1/;
+
+/ {
+	model = "xes,xpedite5200";
+	compatible = "xes,xpedite5200", "xes,MPC8548";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;	// Filled in by U-Boot
+	};
+
+	soc@ef000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xef000000 0x100000>;
+		bus-frequency = <0>;
+		compatible = "fsl,mpc8548-immr", "simple-bus";
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8548-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8548-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		/* On-card I2C */
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			/*
+			 * Board GPIO:
+			 * 	0: BRD_CFG0 (1: P14 IO present)
+			 * 	1: BRD_CFG1 (1: FP ethernet present)
+			 * 	2: BRD_CFG2 (1: XMC IO present)
+			 * 	3: XMC root complex indicator
+			 * 	4: Flash boot device indicator
+			 * 	5: Flash write protect enable
+			 * 	6: PMC monarch indicator
+			 * 	7: PMC EREADY
+			 */
+			gpio1: gpio@18 {
+				compatible = "nxp,pca9556";
+				reg = <0x18>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			/* P14 GPIO */
+			gpio2: gpio@19 {
+				compatible = "nxp,pca9556";
+				reg = <0x19>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,at24c16";
+				reg = <0x50>;
+			};
+
+			rtc@68 {
+				compatible = "st,m41t00",
+					     "dallas,ds1338";
+				reg = <0x68>;
+			};
+
+			dtt@34 {
+				compatible = "maxim,max1237";
+				reg = <0x34>;
+			};
+		};
+
+		/* Off-card I2C */
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		/* eTSEC1: Front panel port 0 */
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x1>;
+				};
+				phy1: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x2>;
+				};
+				phy2: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x3>;
+				};
+				phy3: ethernet-phy@4 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x4>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC2: Front panel port 1 */
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC3: Rear panel port 2 */
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC4: Rear panel port 3 */
+		enet3: ethernet@27000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <3>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			ranges = <0x0 0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi3>;
+			phy-handle = <&phy3>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi3: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	// global utilities reg
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+	localbus@ef005000 {
+		compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xef005000 0x100>;	// BRx, ORx, etc.
+		interrupt-parent = <&mpic>;
+		interrupts = <19 2>;
+
+		ranges = <
+			0 0x0 0xfc000000 0x04000000	// NOR boot flash
+			1 0x0 0xf8000000 0x04000000	// NOR expansion flash
+			2 0x0 0xef800000 0x00010000	// NAND CE1
+			3 0x0 0xef840000 0x00010000	// NAND CE2
+		>;
+
+		nor-boot@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0 0x0 0x4000000>;
+			bank-width = <2>;
+
+			partition@0 {
+				label = "Primary OS";
+				reg = <0x00000000 0x180000>;
+			};
+			partition@180000 {
+				label = "Secondary OS";
+				reg = <0x00180000 0x180000>;
+			};
+			partition@300000 {
+				label = "User";
+				reg = <0x00300000 0x3c80000>;
+			};
+			partition@3f80000 {
+				label = "Boot firmware";
+				reg = <0x03f80000 0x80000>;
+			};
+		};
+
+		nor-alternate@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <1 0x0 0x4000000>;
+			bank-width = <2>;
+
+			partition@0 {
+				label = "Filesystem";
+				reg = <0x00000000 0x3f80000>;
+			};
+			partition@3f80000 {
+				label = "Alternate boot firmware";
+				reg = <0x03f80000 0x80000>;
+			};
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xes,address-ctl-nand";
+			reg = <2 0x0 0x10000>;
+			cle-line = <0x8>;	/* CLE tied to A3 */
+			ale-line = <0x10>;	/* ALE tied to A4 */
+
+			/* U-Boot should fix this up */
+			partition@0 {
+				label = "NAND Filesystem";
+				reg = <0 0x40000000>;
+			};
+		};
+	};
+
+	/* PMC interface */
+	pci0: pci@ef008000 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xef008000 0x1000>;
+		clock-frequency = <33333333>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x40000000
+			  0x01000000 0 0x00000000 0xe8000000 0 0x00800000>;
+	};
+
+	/* XMC PCIe is not yet enabled in U-Boot on XPedite5200 */
+};