Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/mips/ingenic/ci20.dts b/src/mips/ingenic/ci20.dts
new file mode 100644
index 0000000..a141a69
--- /dev/null
+++ b/src/mips/ingenic/ci20.dts
@@ -0,0 +1,650 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "jz4780.dtsi"
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/regulator/active-semi,8865-regulator.h>
+
+/ {
+ compatible = "img,ci20", "ingenic,jz4780";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ };
+
+ chosen {
+ stdout-path = &uart4;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x10000000
+ 0x30000000 0x30000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ switch {
+ label = "ci20:sw1";
+ linux,code = <KEY_F13>;
+ gpios = <&gpd 17 GPIO_ACTIVE_HIGH>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "ci20:red:led0";
+ gpios = <&gpc 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ };
+
+ led-1 {
+ label = "ci20:red:led1";
+ gpios = <&gpc 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "nand-disk";
+ };
+
+ led-2 {
+ label = "ci20:red:led2";
+ gpios = <&gpc 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "cpu1";
+ };
+
+ led-3 {
+ label = "ci20:red:led3";
+ gpios = <&gpc 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "cpu0";
+ };
+ };
+
+ eth0_power: fixedregulator-0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "eth0_power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpb 25 0>;
+ enable-active-high;
+ };
+
+ hdmi_out: connector {
+ compatible = "hdmi-connector";
+ label = "HDMI OUT";
+ type = "a";
+
+ ddc-en-gpios = <&gpa 25 GPIO_ACTIVE_HIGH>;
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&dw_hdmi_out>;
+ };
+ };
+ };
+
+ ir: ir {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpe 3 GPIO_ACTIVE_LOW>;
+ };
+
+ bt_power: fixedregulator-1 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "bt_power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-settling-time-us = <1400>;
+
+ vin-supply = <&vcc_50>;
+
+ gpio = <&gpb 19 0>;
+ enable-active-high;
+ };
+
+ otg_power: fixedregulator-2 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "otg_power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpf 15 0>;
+ enable-active-high;
+ };
+
+ wifi_power: fixedregulator-4 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "wifi_power";
+
+ /*
+ * Technically it's 5V, the WiFi chip has its own internal
+ * regulators; but the MMC/SD subsystem won't accept such a
+ * value.
+ */
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-settling-time-us = <150000>;
+
+ vin-supply = <&bt_power>;
+ };
+
+ vcc_33v: fixedregulator-5 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vcc_33v";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ wifi_pwrseq: pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpf 7 GPIO_ACTIVE_LOW>;
+
+ clocks = <&rtc_dev>;
+ clock-names = "ext_clock";
+ };
+};
+
+&ext {
+ clock-frequency = <48000000>;
+};
+
+&cgu {
+ /*
+ * Use the 32.768 kHz oscillator as the parent of the RTC for a higher
+ * precision.
+ */
+ assigned-clocks = <&cgu JZ4780_CLK_OTGPHY>, <&cgu JZ4780_CLK_RTC>,
+ <&cgu JZ4780_CLK_SSIPLL>, <&cgu JZ4780_CLK_SSI>,
+ <&cgu JZ4780_CLK_HDMI>, <&cgu JZ4780_CLK_MSCMUX>;
+ assigned-clock-parents = <0>, <&cgu JZ4780_CLK_RTCLK>,
+ <&cgu JZ4780_CLK_MPLL>,
+ <&cgu JZ4780_CLK_SSIPLL>,
+ <0>, <&cgu JZ4780_CLK_MPLL>;
+ assigned-clock-rates = <48000000>, <0>, <54000000>, <0>, <27000000>;
+};
+
+&tcu {
+ /*
+ * 750 kHz for the system timers and clocksource,
+ * use channel #0 and #1 for the per cpu system timers,
+ * and use channel #2 for the clocksource.
+ *
+ * 3000 kHz for the OST timer to provide a higher
+ * precision clocksource.
+ */
+ assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_OST>;
+ assigned-clock-rates = <750000>, <750000>, <750000>, <3000000>;
+};
+
+&mmc0 {
+ status = "okay";
+
+ bus-width = <4>;
+ max-frequency = <50000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mmc0>;
+
+ cd-gpios = <&gpf 20 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&vcc_33v>;
+ vqmmc-supply = <&vcc_33v>;
+};
+
+&mmc1 {
+ status = "okay";
+
+ bus-width = <4>;
+ max-frequency = <25000000>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ vmmc-supply = <&wifi_power>;
+ vqmmc-supply = <&wifi_io>;
+ non-removable;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mmc1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ interrupt-parent = <&gpd>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "host-wake";
+ };
+};
+
+&uart0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart0>;
+};
+
+&uart1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart1>;
+};
+
+&uart2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart2>;
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm4330-bt";
+
+ vbat-supply = <&bt_power>;
+ vddio-supply = <&wifi_io>;
+
+ interrupt-parent = <&gpf>;
+ interrupts = <6 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "host-wakeup";
+
+ clocks = <&rtc_dev>;
+ clock-names = "lpo";
+
+ reset-gpios = <&gpf 8 GPIO_ACTIVE_LOW>;
+ device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpf 4 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&uart3 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart3>;
+};
+
+&uart4 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart4>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c0>;
+
+ clock-frequency = <400000>;
+
+ act8600: act8600@5a {
+ compatible = "active-semi,act8600";
+ reg = <0x5a>;
+
+ regulators {
+ vddcore: DCDC1 {
+ regulator-min-microvolt = <1125000>;
+ regulator-max-microvolt = <1125000>;
+ vp1-supply = <&vcc_33v>;
+ regulator-always-on;
+ };
+ vddmem: DCDC2 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ vp2-supply = <&vcc_33v>;
+ regulator-always-on;
+ };
+ vcc_33: DCDC3 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vp3-supply = <&vcc_33v>;
+ regulator-always-on;
+ };
+ vcc_50: SUDCDC_REG4 {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+ vcc_25: LDO5 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ inl-supply = <&vcc_33v>;
+ regulator-always-on;
+ };
+ wifi_io: LDO6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-settling-time-us = <150000>;
+ inl-supply = <&vcc_33v>;
+ };
+ cim_io_28: LDO7 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ inl-supply = <&vcc_33v>;
+ };
+ cim_io_15: LDO8 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ inl-supply = <&vcc_33v>;
+ };
+ vrtc_18: LDO_REG9 {
+ /* Despite the datasheet stating 3.3V
+ * for REG9 and the driver expecting that,
+ * REG9 outputs 1.8V.
+ * Likely the CI20 uses a proprietary
+ * factory programmed chip variant.
+ * Since this is a simple on/off LDO the
+ * exact values do not matter.
+ */
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ vcc_11: LDO_REG10 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c1>;
+
+};
+
+&i2c2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c2>;
+
+};
+
+&i2c3 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c3>;
+
+};
+
+&i2c4 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c4>;
+
+ clock-frequency = <400000>;
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+
+ interrupt-parent = <&gpf>;
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&nemc {
+ status = "okay";
+
+ nandc: nand-controller@1 {
+ compatible = "ingenic,jz4780-nand";
+ reg = <1 0 0x1000000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ecc-engine = <&bch>;
+
+ ingenic,nemc-tAS = <10>;
+ ingenic,nemc-tAH = <5>;
+ ingenic,nemc-tBP = <10>;
+ ingenic,nemc-tAW = <15>;
+ ingenic,nemc-tSTRV = <100>;
+
+ /*
+ * Only CLE/ALE are needed for the devices that are connected, rather
+ * than the full address line set.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_nemc>;
+
+ nand@1 {
+ reg = <1>;
+
+ nand-ecc-step-size = <1024>;
+ nand-ecc-strength = <24>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_nemc_cs1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ partition@0 {
+ label = "u-boot-spl";
+ reg = <0x0 0x0 0x0 0x800000>;
+ };
+
+ partition@800000 {
+ label = "u-boot";
+ reg = <0x0 0x800000 0x0 0x200000>;
+ };
+
+ partition@a00000 {
+ label = "u-boot-env";
+ reg = <0x0 0xa00000 0x0 0x200000>;
+ };
+
+ partition@c00000 {
+ label = "boot";
+ reg = <0x0 0xc00000 0x0 0x4000000>;
+ };
+
+ partition@4c00000 {
+ label = "system";
+ reg = <0x0 0x4c00000 0x1 0xfb400000>;
+ };
+ };
+ };
+ };
+
+ dm9000@6 {
+ compatible = "davicom,dm9000";
+ davicom,no-eeprom;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_nemc_cs6>;
+
+ reg = <6 0 1>, /* addr */
+ <6 2 1>; /* data */
+
+ ingenic,nemc-tAS = <15>;
+ ingenic,nemc-tAH = <10>;
+ ingenic,nemc-tBP = <20>;
+ ingenic,nemc-tAW = <50>;
+ ingenic,nemc-tSTRV = <100>;
+
+ reset-gpios = <&gpf 12 GPIO_ACTIVE_LOW>;
+ vcc-supply = <ð0_power>;
+
+ interrupt-parent = <&gpe>;
+ interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+
+ nvmem-cells = <ð0_addr>;
+ nvmem-cell-names = "mac-address";
+ };
+};
+
+&bch {
+ status = "okay";
+};
+
+&otg_phy {
+ status = "okay";
+
+ vcc-supply = <&otg_power>;
+};
+
+&otg {
+ status = "okay";
+};
+
+&pinctrl {
+ pins_uart0: uart0 {
+ function = "uart0";
+ groups = "uart0-data";
+ bias-disable;
+ };
+
+ pins_uart1: uart1 {
+ function = "uart1";
+ groups = "uart1-data";
+ bias-disable;
+ };
+
+ pins_uart2: uart2 {
+ function = "uart2";
+ groups = "uart2-data", "uart2-hwflow";
+ bias-disable;
+ };
+
+ pins_uart3: uart3 {
+ function = "uart3";
+ groups = "uart3-data", "uart3-hwflow";
+ bias-disable;
+ };
+
+ pins_uart4: uart4 {
+ function = "uart4";
+ groups = "uart4-data";
+ bias-disable;
+ };
+
+ pins_i2c0: i2c0 {
+ function = "i2c0";
+ groups = "i2c0-data";
+ bias-disable;
+ };
+
+ pins_i2c1: i2c1 {
+ function = "i2c1";
+ groups = "i2c1-data";
+ bias-disable;
+ };
+
+ pins_i2c2: i2c2 {
+ function = "i2c2";
+ groups = "i2c2-data";
+ bias-disable;
+ };
+
+ pins_i2c3: i2c3 {
+ function = "i2c3";
+ groups = "i2c3-data";
+ bias-disable;
+ };
+
+ pins_i2c4: i2c4 {
+ function = "i2c4";
+ groups = "i2c4-data-e";
+ bias-disable;
+ };
+
+ pins_hdmi_ddc: hdmi_ddc {
+ function = "hdmi-ddc";
+ groups = "hdmi-ddc";
+ bias-disable;
+ };
+
+ pins_nemc: nemc {
+ function = "nemc";
+ groups = "nemc-data", "nemc-cle-ale", "nemc-rd-we", "nemc-frd-fwe";
+ bias-disable;
+ };
+
+ pins_nemc_cs1: nemc-cs1 {
+ function = "nemc-cs1";
+ groups = "nemc-cs1";
+ bias-disable;
+ };
+
+ pins_nemc_cs6: nemc-cs6 {
+ function = "nemc-cs6";
+ groups = "nemc-cs6";
+ bias-disable;
+ };
+
+ pins_mmc0: mmc0 {
+ function = "mmc0";
+ groups = "mmc0-1bit-e", "mmc0-4bit-e";
+ bias-disable;
+ };
+
+ pins_mmc1: mmc1 {
+ function = "mmc1";
+ groups = "mmc1-1bit-d", "mmc1-4bit-d";
+ bias-disable;
+ };
+};
+
+&hdmi {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_hdmi_ddc>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dw_hdmi_in: endpoint {
+ remote-endpoint = <&lcd_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dw_hdmi_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+};
+
+&lcdc0 {
+ status = "okay";
+
+ port {
+ lcd_out: endpoint {
+ remote-endpoint = <&dw_hdmi_in>;
+ };
+ };
+};
diff --git a/src/mips/ingenic/cu1000-neo.dts b/src/mips/ingenic/cu1000-neo.dts
new file mode 100644
index 0000000..c89abf9
--- /dev/null
+++ b/src/mips/ingenic/cu1000-neo.dts
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "x1000.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/ingenic,sysost.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "yna,cu1000-neo", "ingenic,x1000e";
+ model = "YSH & ATIL General Board CU1000-Neo";
+
+ aliases {
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x04000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-0 {
+ gpios = <&gpb 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ wlan_pwrseq: msc1-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+
+ reset-gpios = <&gpc 17 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+};
+
+&exclk {
+ clock-frequency = <24000000>;
+};
+
+&cgu {
+ /*
+ * Use the 32.768 kHz oscillator as the parent of the RTC for a higher
+ * precision.
+ */
+ assigned-clocks = <&cgu X1000_CLK_RTC>;
+ assigned-clock-parents = <&cgu X1000_CLK_RTCLK>;
+};
+
+&ost {
+ /* 1500 kHz for the system timer and clocksource */
+ assigned-clocks = <&ost OST_CLK_EVENT_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>;
+ assigned-clock-rates = <1500000>, <1500000>;
+};
+
+&uart2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart2>;
+};
+
+&ssi {
+ status = "okay";
+
+ num-cs = <2>;
+ cs-gpios = <0>, <&gpc 20 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_ssi>;
+
+ sc16is752: expander@0 {
+ compatible = "nxp,sc16is752";
+ reg = <0>; /* CE0 */
+
+ spi-rx-bus-width = <1>;
+ spi-tx-bus-width = <1>;
+ spi-max-frequency = <4000000>;
+
+ clocks = <&exclk_sc16is752>;
+
+ interrupt-parent = <&gpc>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ exclk_sc16is752: sc16is752 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c0>;
+
+ ads7830: adc@48 {
+ compatible = "ti,ads7830";
+ reg = <0x48>;
+ };
+};
+
+&msc0 {
+ status = "okay";
+
+ bus-width = <8>;
+ max-frequency = <50000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_msc0>;
+
+ non-removable;
+};
+
+&msc1 {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-width = <4>;
+ max-frequency = <50000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_msc1>;
+
+ non-removable;
+
+ mmc-pwrseq = <&wlan_pwrseq>;
+
+ ap6212a: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ interrupt-parent = <&gpc>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "host-wake";
+
+ brcm,drive-strength = <10>;
+ };
+};
+
+&mac {
+ status = "okay";
+
+ phy-mode = "rmii";
+ phy-handle = <&lan8720a>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mac>;
+
+ snps,reset-gpio = <&gpc 23 GPIO_ACTIVE_LOW>; /* PC23 */
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 30000>;
+};
+
+&mdio {
+ status = "okay";
+
+ lan8720a: ethernet-phy@0 {
+ compatible = "ethernet-phy-id0007.c0f0", "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
+&otg_phy {
+ status = "okay";
+};
+
+&otg {
+ status = "okay";
+};
+
+&pinctrl {
+ pins_uart2: uart2 {
+ function = "uart2";
+ groups = "uart2-data-d";
+ bias-pull-up;
+ };
+
+ pins_ssi: ssi {
+ function = "ssi";
+ groups = "ssi-dt-d", "ssi-dr-d", "ssi-clk-d", "ssi-ce0-d";
+ bias-disable;
+ };
+
+ pins_i2c0: i2c0 {
+ function = "i2c0";
+ groups = "i2c0-data";
+ bias-pull-up;
+ };
+
+ pins_msc0: msc0 {
+ function = "mmc0";
+ groups = "mmc0-1bit", "mmc0-4bit", "mmc0-8bit";
+ bias-disable;
+ };
+
+ pins_msc1: msc1 {
+ function = "mmc1";
+ groups = "mmc1-1bit", "mmc1-4bit";
+ bias-disable;
+ };
+
+ pins_mac: mac {
+ function = "mac";
+ groups = "mac";
+ bias-disable;
+ };
+};
diff --git a/src/mips/ingenic/cu1830-neo.dts b/src/mips/ingenic/cu1830-neo.dts
new file mode 100644
index 0000000..3c77849
--- /dev/null
+++ b/src/mips/ingenic/cu1830-neo.dts
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "x1830.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/ingenic,sysost.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "yna,cu1830-neo", "ingenic,x1830";
+ model = "YSH & ATIL General Board CU1830-Neo";
+
+ aliases {
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial1:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-0 {
+ gpios = <&gpc 17 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ wlan_pwrseq: msc1-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+
+ reset-gpios = <&gpc 13 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+};
+
+&exclk {
+ clock-frequency = <24000000>;
+};
+
+&cgu {
+ /*
+ * Use the 32.768 kHz oscillator as the parent of the RTC for a higher
+ * precision.
+ */
+ assigned-clocks = <&cgu X1830_CLK_RTC>;
+ assigned-clock-parents = <&cgu X1830_CLK_RTCLK>;
+};
+
+&ost {
+ /* 1500 kHz for the system timer and clocksource */
+ assigned-clocks = <&ost OST_CLK_EVENT_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>;
+ assigned-clock-rates = <1500000>, <1500000>;
+};
+
+&uart1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart1>;
+};
+
+&ssi0 {
+ status = "okay";
+
+ num-cs = <2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_ssi0>;
+
+ sc16is752: expander@0 {
+ compatible = "nxp,sc16is752";
+ reg = <0>; /* CE0 */
+
+ spi-rx-bus-width = <1>;
+ spi-tx-bus-width = <1>;
+ spi-max-frequency = <4000000>;
+
+ clocks = <&exclk_sc16is752>;
+
+ interrupt-parent = <&gpb>;
+ interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ exclk_sc16is752: sc16is752 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c0>;
+
+ ads7830: adc@48 {
+ compatible = "ti,ads7830";
+ reg = <0x48>;
+ };
+};
+
+&dtrng {
+ status = "okay";
+};
+
+&msc0 {
+ status = "okay";
+
+ bus-width = <4>;
+ max-frequency = <50000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_msc0>;
+
+ non-removable;
+};
+
+&msc1 {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-width = <4>;
+ max-frequency = <50000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_msc1>;
+
+ non-removable;
+
+ mmc-pwrseq = <&wlan_pwrseq>;
+
+ ap6212a: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ interrupt-parent = <&gpc>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "host-wake";
+
+ brcm,drive-strength = <10>;
+ };
+};
+
+&mac {
+ status = "okay";
+
+ phy-mode = "rmii";
+ phy-handle = <&ip101gr>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mac>;
+
+ snps,reset-gpio = <&gpb 28 GPIO_ACTIVE_LOW>; /* PB28 */
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 30000>;
+};
+
+&mdio {
+ status = "okay";
+
+ ip101gr: ethernet-phy@0 {
+ compatible = "ethernet-phy-id0243.0c54", "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
+&otg_phy {
+ status = "okay";
+};
+
+&otg {
+ status = "okay";
+};
+
+&pinctrl {
+ pins_uart1: uart1 {
+ function = "uart1";
+ groups = "uart1-data";
+ bias-pull-up;
+ };
+
+ pins_ssi0: ssi0 {
+ function = "ssi0";
+ groups = "ssi0-dt", "ssi0-dr", "ssi0-clk", "ssi0-ce0", "ssi0-ce1";
+ bias-disable;
+ };
+
+ pins_i2c0: i2c0 {
+ function = "i2c0";
+ groups = "i2c0-data";
+ bias-pull-up;
+ };
+
+ pins_msc0: msc0 {
+ function = "mmc0";
+ groups = "mmc0-1bit", "mmc0-4bit";
+ bias-disable;
+ };
+
+ pins_msc1: msc1 {
+ function = "mmc1";
+ groups = "mmc1-1bit", "mmc1-4bit";
+ bias-disable;
+ };
+
+ pins_mac: mac {
+ function = "mac";
+ groups = "mac";
+ bias-disable;
+ };
+};
diff --git a/src/mips/ingenic/gcw0.dts b/src/mips/ingenic/gcw0.dts
new file mode 100644
index 0000000..5d33f26
--- /dev/null
+++ b/src/mips/ingenic/gcw0.dts
@@ -0,0 +1,542 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "jz4770.dtsi"
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/adc/ingenic,adc.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "gcw,zero", "ingenic,jz4770";
+ model = "GCW Zero";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
+ memory: memory {
+ device_type = "memory";
+ reg = <0x0 0x10000000>,
+ <0x30000000 0x10000000>;
+ };
+
+ chosen {
+ stdout-path = "serial2:57600n8";
+ };
+
+ vcc: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ mmc1_power: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "mmc1_vcc";
+ gpio = <&gpe 9 0>;
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc>;
+ };
+
+ headphones_amp: analog-amplifier@0 {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpf 3 GPIO_ACTIVE_LOW>;
+ enable-delay-ms = <50>;
+
+ VCC-supply = <&ldo5>;
+ sound-name-prefix = "Headphones Amp";
+ };
+
+ speaker_amp: analog-amplifier@1 {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpf 20 GPIO_ACTIVE_HIGH>;
+
+ VCC-supply = <&ldo5>;
+ sound-name-prefix = "Speaker Amp";
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,name = "gcw0-audio";
+ simple-audio-card,format = "i2s";
+
+ simple-audio-card,widgets =
+ "Speaker", "Speaker",
+ "Headphone", "Headphones",
+ "Microphone", "Built-in Mic";
+ simple-audio-card,routing =
+ "Headphones Amp INL", "LHPOUT",
+ "Headphones Amp INR", "RHPOUT",
+ "Headphones", "Headphones Amp OUTL",
+ "Headphones", "Headphones Amp OUTR",
+ "Speaker Amp INL", "LOUT",
+ "Speaker Amp INR", "ROUT",
+ "Speaker", "Speaker Amp OUTL",
+ "Speaker", "Speaker Amp OUTR",
+ "LLINEIN", "Cap-less",
+ "RLINEIN", "Cap-less",
+ "Built-in Mic", "MICBIAS",
+ "MIC1P", "Built-in Mic",
+ "MIC1N", "Built-in Mic";
+ simple-audio-card,pin-switches = "Speaker", "Headphones";
+
+ simple-audio-card,hp-det-gpio = <&gpf 21 GPIO_ACTIVE_LOW>;
+ simple-audio-card,aux-devs = <&speaker_amp>, <&headphones_amp>;
+
+ simple-audio-card,bitclock-master = <&dai_codec>;
+ simple-audio-card,frame-master = <&dai_codec>;
+
+ dai_cpu: simple-audio-card,cpu {
+ sound-dai = <&aic>;
+ };
+
+ dai_codec: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+ };
+
+ rumble {
+ compatible = "pwm-vibrator";
+ pwms = <&pwm 4 2000000 0>;
+ pwm-names = "enable";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_pwm4>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 1 40000 0>;
+ power-supply = <&vcc>;
+
+ brightness-levels = <0 16 32 48 64 80 96 112 128
+ 144 160 176 192 208 224 240 255>;
+ default-brightness-level = <12>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_pwm1>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ button-0 {
+ label = "D-pad up";
+ linux,code = <KEY_UP>;
+ linux,can-disable;
+ gpios = <&gpe 21 GPIO_ACTIVE_LOW>;
+ };
+
+ button-1 {
+ label = "D-pad down";
+ linux,code = <KEY_DOWN>;
+ linux,can-disable;
+ gpios = <&gpe 25 GPIO_ACTIVE_LOW>;
+ };
+
+ button-2 {
+ label = "D-pad left";
+ linux,code = <KEY_LEFT>;
+ linux,can-disable;
+ gpios = <&gpe 23 GPIO_ACTIVE_LOW>;
+ };
+
+ button-3 {
+ label = "D-pad right";
+ linux,code = <KEY_RIGHT>;
+ linux,can-disable;
+ gpios = <&gpe 24 GPIO_ACTIVE_LOW>;
+ };
+
+ button-4 {
+ label = "Button A";
+ linux,code = <KEY_LEFTCTRL>;
+ linux,can-disable;
+ gpios = <&gpe 29 GPIO_ACTIVE_LOW>;
+ };
+
+ button-5 {
+ label = "Button B";
+ linux,code = <KEY_LEFTALT>;
+ linux,can-disable;
+ gpios = <&gpe 20 GPIO_ACTIVE_LOW>;
+ };
+
+ button-6 {
+ label = "Button Y";
+ linux,code = <KEY_SPACE>;
+ linux,can-disable;
+ gpios = <&gpe 27 GPIO_ACTIVE_LOW>;
+ };
+
+ button-7 {
+ label = "Button X";
+ linux,code = <KEY_LEFTSHIFT>;
+ linux,can-disable;
+ gpios = <&gpe 28 GPIO_ACTIVE_LOW>;
+ };
+
+ button-8 {
+ label = "Left shoulder button";
+ linux,code = <KEY_TAB>;
+ linux,can-disable;
+ gpios = <&gpb 20 GPIO_ACTIVE_LOW>;
+ };
+
+ button-9 {
+ label = "Right shoulder button";
+ linux,code = <KEY_BACKSPACE>;
+ linux,can-disable;
+ gpios = <&gpe 26 GPIO_ACTIVE_LOW>;
+ };
+
+ button-10 {
+ label = "Start button";
+ linux,code = <KEY_ENTER>;
+ linux,can-disable;
+ gpios = <&gpb 21 GPIO_ACTIVE_LOW>;
+ };
+
+ button-11 {
+ label = "Select button";
+ linux,code = <KEY_ESC>;
+ linux,can-disable;
+ /*
+ * This is the only button that is active high,
+ * since it doubles as BOOT_SEL1.
+ */
+ gpios = <&gpd 18 GPIO_ACTIVE_HIGH>;
+ };
+
+ button-12 {
+ label = "Power slider";
+ linux,code = <KEY_POWER>;
+ linux,can-disable;
+ gpios = <&gpa 30 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ button-13 {
+ label = "Power hold";
+ linux,code = <KEY_PAUSE>;
+ linux,can-disable;
+ gpios = <&gpf 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ i2c3: i2c-controller@3 {
+ compatible = "i2c-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sda-gpios = <&gpd 5 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpd 4 GPIO_ACTIVE_HIGH>;
+ i2c-gpio,delay-us = <2>; /* 250 kHz */
+
+ act8600: pmic@5a {
+ compatible = "active-semi,act8600";
+ reg = <0x5a>;
+
+ regulators {
+ /* USB OTG */
+ otg_vbus: SUDCDC_REG4 {
+ /*
+ * 5.3V instead of 5.0V to compensate
+ * for the voltage drop of a diode
+ * between the regulator and the
+ * connector.
+ */
+ regulator-min-microvolt = <5300000>;
+ regulator-max-microvolt = <5300000>;
+ inl-supply = <&vcc>;
+ };
+
+ /*
+ * When this is off, there is no sound, but also
+ * no USB networking.
+ */
+ ldo5: LDO5 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ inl-supply = <&vcc>;
+ };
+
+ /* LCD panel and FM radio */
+ ldo6: LDO6 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ inl-supply = <&vcc>;
+ };
+
+ /* ??? */
+ LDO7 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ /*regulator-always-on;*/
+ inl-supply = <&vcc>;
+ };
+
+ /*
+ * The colors on the LCD are wrong when this is
+ * off. Which is strange, since the LCD panel
+ * data sheet only mentions a 3.3V input.
+ */
+ LDO8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ inl-supply = <&vcc>;
+ };
+
+ /* RTC fixed 3.3V */
+ LDO_REG9 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ inl-supply = <&vcc>;
+ };
+
+ /* Unused fixed 1.2V */
+ LDO_REG10 {
+ inl-supply = <&vcc>;
+ };
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led {
+ gpios = <&gpb 30 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+
+ spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpe 15 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpe 17 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpe 16 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+
+ nt39016@0 {
+ compatible = "kingdisplay,kd035g6-54nt";
+ reg = <0>;
+
+ spi-max-frequency = <3125000>;
+ spi-3wire;
+
+ reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+ backlight = <&backlight>;
+ power-supply = <&ldo6>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+ };
+
+ connector {
+ compatible = "gpio-usb-b-connector", "usb-b-connector";
+ label = "mini-USB";
+ type = "mini";
+
+ /*
+ * USB OTG is not yet working reliably, the ID detection
+ * mechanism tends to fry easily for unknown reasons.
+ * Until this is fixed, disable OTG by not providing the
+ * ID GPIO to the driver.
+ */
+ //id-gpios = <&gpf 18 GPIO_ACTIVE_LOW>;
+
+ vbus-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&otg_vbus>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_otg>;
+
+ port {
+ usb_ep: endpoint {
+ remote-endpoint = <&usb_otg_ep>;
+ };
+ };
+ };
+};
+
+&ext {
+ clock-frequency = <12000000>;
+};
+
+&pinctrl {
+ pins_lcd: lcd {
+ function = "lcd";
+ groups = "lcd-24bit";
+ };
+
+ pins_uart2: uart2 {
+ function = "uart2";
+ groups = "uart2-data";
+ };
+
+ pins_mmc0: mmc0 {
+ function = "mmc0";
+ groups = "mmc0-1bit-a", "mmc0-4bit-a";
+ };
+
+ pins_mmc1: mmc1 {
+ function = "mmc1";
+ groups = "mmc1-1bit-d", "mmc1-4bit-d";
+ };
+
+ pins_otg: otg {
+ otg-vbus-pin {
+ function = "otg";
+ groups = "otg-vbus";
+ };
+
+ vbus-pin {
+ pins = "PB5";
+ bias-disable;
+ };
+ };
+
+ pins_pwm1: pwm1 {
+ function = "pwm1";
+ groups = "pwm1";
+ };
+
+ pins_pwm4: pwm4 {
+ function = "pwm4";
+ groups = "pwm4";
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart2>;
+
+ status = "okay";
+};
+
+&cgu {
+ /*
+ * Put high-speed peripherals under PLL1, such that we can change the
+ * PLL0 frequency on demand without having to suspend peripherals.
+ * We use a rate of 432 MHz, which is the least common multiple of
+ * 27 MHz (required by TV encoder) and 48 MHz (required by USB host).
+ * Put the GPU under PLL0 since we want a higher frequency.
+ * Use the 32 kHz oscillator as the parent of the RTC for a higher
+ * precision.
+ */
+ assigned-clocks =
+ <&cgu JZ4770_CLK_PLL1>,
+ <&cgu JZ4770_CLK_GPU>,
+ <&cgu JZ4770_CLK_RTC>,
+ <&cgu JZ4770_CLK_UHC>,
+ <&cgu JZ4770_CLK_LPCLK_MUX>,
+ <&cgu JZ4770_CLK_MMC0_MUX>,
+ <&cgu JZ4770_CLK_MMC1_MUX>;
+ assigned-clock-parents =
+ <0>,
+ <&cgu JZ4770_CLK_PLL0>,
+ <&cgu JZ4770_CLK_OSC32K>,
+ <&cgu JZ4770_CLK_PLL1>,
+ <&cgu JZ4770_CLK_PLL1>,
+ <&cgu JZ4770_CLK_PLL1>,
+ <&cgu JZ4770_CLK_PLL1>;
+ assigned-clock-rates =
+ <432000000>,
+ <600000000>;
+};
+
+&uhc {
+ /* The WiFi module is connected to the UHC. */
+ status = "okay";
+};
+
+&tcu {
+ /*
+ * 750 kHz for the system timer and clocksource, 12 MHz for the OST,
+ * and use RTC as the parent for the watchdog clock
+ */
+ assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>,
+ <&tcu TCU_CLK_OST>, <&tcu TCU_CLK_WDT>;
+ assigned-clock-parents = <0>, <0>, <0>, <&cgu JZ4770_CLK_RTC>;
+ assigned-clock-rates = <750000>, <750000>, <12000000>;
+
+ /* PWM1 is in use, so use channel #2 for the clocksource */
+ ingenic,pwm-channels-mask = <0xfa>;
+};
+
+&usb_otg {
+ port {
+ usb_otg_ep: endpoint {
+ remote-endpoint = <&usb_ep>;
+ };
+ };
+};
+
+&otg_phy {
+ vcc-supply = <&ldo5>;
+};
+
+&rtc {
+ clocks = <&cgu JZ4770_CLK_RTC>;
+ clock-names = "rtc";
+
+ system-power-controller;
+};
+
+&mmc0 {
+ status = "okay";
+
+ bus-width = <4>;
+ max-frequency = <48000000>;
+ vmmc-supply = <&vcc>;
+ non-removable;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mmc0>;
+};
+
+&mmc1 {
+ status = "okay";
+
+ bus-width = <4>;
+ max-frequency = <48000000>;
+ cd-gpios = <&gpb 2 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&mmc1_power>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mmc1>;
+};
+
+&lcd {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_lcd>;
+
+ port {
+ panel_output: endpoint {
+ remote-endpoint = <&panel_input>;
+ };
+ };
+};
diff --git a/src/mips/ingenic/gcw0_proto.dts b/src/mips/ingenic/gcw0_proto.dts
new file mode 100644
index 0000000..02df22f
--- /dev/null
+++ b/src/mips/ingenic/gcw0_proto.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "gcw0.dts"
+
+/ {
+ model = "GCW Zero Prototype";
+};
+
+&memory {
+ /* Prototype has only 256 MiB of RAM */
+ reg = <0x0 0x10000000>;
+};
diff --git a/src/mips/ingenic/jz4725b.dtsi b/src/mips/ingenic/jz4725b.dtsi
new file mode 100644
index 0000000..c5c5a09
--- /dev/null
+++ b/src/mips/ingenic/jz4725b.dtsi
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/ingenic,jz4725b-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ingenic,jz4725b";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-mxu1.0";
+ reg = <0>;
+
+ clocks = <&cgu JZ4725B_CLK_CCLK>;
+ clock-names = "cpu";
+ };
+ };
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ intc: interrupt-controller@10001000 {
+ compatible = "ingenic,jz4725b-intc", "ingenic,jz4740-intc";
+ reg = <0x10001000 0x14>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ ext: ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ osc32k: osc32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ cgu: clock-controller@10000000 {
+ compatible = "ingenic,jz4725b-cgu";
+ reg = <0x10000000 0x100>;
+
+ clocks = <&ext>, <&osc32k>;
+ clock-names = "ext", "osc32k";
+
+ #clock-cells = <1>;
+ };
+
+ tcu: timer@10002000 {
+ compatible = "ingenic,jz4725b-tcu", "simple-mfd";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu JZ4725B_CLK_RTC>,
+ <&cgu JZ4725B_CLK_EXT>,
+ <&cgu JZ4725B_CLK_PCLK>,
+ <&cgu JZ4725B_CLK_TCU>;
+ clock-names = "rtc", "ext", "pclk", "tcu";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <23>, <22>, <21>;
+
+ watchdog: watchdog@0 {
+ compatible = "ingenic,jz4725b-watchdog", "ingenic,jz4740-watchdog";
+ reg = <0x0 0xc>;
+
+ clocks = <&tcu TCU_CLK_WDT>;
+ clock-names = "wdt";
+ };
+
+ pwm: pwm@60 {
+ compatible = "ingenic,jz4725b-pwm";
+ reg = <0x60 0x40>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+ <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>;
+ clock-names = "timer0", "timer1", "timer2",
+ "timer3", "timer4", "timer5";
+ };
+
+ ost: timer@e0 {
+ compatible = "ingenic,jz4725b-ost";
+ reg = <0xe0 0x20>;
+
+ clocks = <&tcu TCU_CLK_OST>;
+ clock-names = "ost";
+
+ interrupts = <15>;
+ };
+ };
+
+ rtc_dev: rtc@10003000 {
+ compatible = "ingenic,jz4725b-rtc", "ingenic,jz4740-rtc";
+ reg = <0x10003000 0x40>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <6>;
+
+ clocks = <&cgu JZ4725B_CLK_RTC>;
+ clock-names = "rtc";
+ };
+
+ pinctrl: pinctrl@10010000 {
+ compatible = "ingenic,jz4725b-pinctrl";
+ reg = <0x10010000 0x400>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpa: gpio@0 {
+ compatible = "ingenic,jz4725b-gpio";
+ reg = <0>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <16>;
+ };
+
+ gpb: gpio@1 {
+ compatible = "ingenic,jz4725b-gpio";
+ reg = <1>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 32 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <15>;
+ };
+
+ gpc: gpio@2 {
+ compatible = "ingenic,jz4725b-gpio";
+ reg = <2>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 64 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <14>;
+ };
+
+ gpd: gpio@3 {
+ compatible = "ingenic,jz4725b-gpio";
+ reg = <3>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 96 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <13>;
+ };
+ };
+
+ aic: audio-controller@10020000 {
+ compatible = "ingenic,jz4725b-i2s", "ingenic,jz4740-i2s";
+ reg = <0x10020000 0x38>;
+
+ #sound-dai-cells = <0>;
+
+ clocks = <&cgu JZ4725B_CLK_AIC>, <&cgu JZ4725B_CLK_I2S>;
+ clock-names = "aic", "i2s";
+
+ interrupt-parent = <&intc>;
+ interrupts = <10>;
+
+ dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>;
+ dma-names = "rx", "tx";
+ };
+
+ codec: audio-codec@100200a4 {
+ compatible = "ingenic,jz4725b-codec";
+ reg = <0x100200a4 0x8>;
+
+ #sound-dai-cells = <0>;
+
+ clocks = <&cgu JZ4725B_CLK_AIC>;
+ clock-names = "aic";
+ };
+
+ mmc0: mmc@10021000 {
+ compatible = "ingenic,jz4725b-mmc";
+ reg = <0x10021000 0x1000>;
+
+ clocks = <&cgu JZ4725B_CLK_MMC0>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <25>;
+
+ dmas = <&dmac 27 0xffffffff>, <&dmac 26 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+ };
+
+ mmc1: mmc@10022000 {
+ compatible = "ingenic,jz4725b-mmc";
+ reg = <0x10022000 0x1000>;
+
+ clocks = <&cgu JZ4725B_CLK_MMC1>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <24>;
+
+ dmas = <&dmac 31 0xffffffff>, <&dmac 30 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+ };
+
+ uart: serial@10030000 {
+ compatible = "ingenic,jz4725b-uart", "ingenic,jz4740-uart";
+ reg = <0x10030000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <9>;
+
+ clocks = <&ext>, <&cgu JZ4725B_CLK_UART>;
+ clock-names = "baud", "module";
+ };
+
+ adc: adc@10070000 {
+ compatible = "ingenic,jz4725b-adc";
+ #io-channel-cells = <1>;
+
+ reg = <0x10070000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10070000 0x30>;
+
+ clocks = <&cgu JZ4725B_CLK_ADC>;
+ clock-names = "adc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <18>;
+ };
+
+ nemc: memory-controller@13010000 {
+ compatible = "ingenic,jz4725b-nemc", "ingenic,jz4740-nemc";
+ reg = <0x13010000 0x10000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <1 0 0x18000000 0x4000000>, <2 0 0x14000000 0x4000000>,
+ <3 0 0x0c000000 0x4000000>, <4 0 0x08000000 0x4000000>;
+
+ clocks = <&cgu JZ4725B_CLK_MCLK>;
+ };
+
+ dmac: dma-controller@13020000 {
+ compatible = "ingenic,jz4725b-dma";
+ reg = <0x13020000 0xd8>, <0x13020300 0x14>;
+
+ #dma-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <29>;
+
+ clocks = <&cgu JZ4725B_CLK_DMA>;
+ };
+
+ udc: usb@13040000 {
+ compatible = "ingenic,jz4725b-musb", "ingenic,jz4740-musb";
+ reg = <0x13040000 0x10000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27>;
+ interrupt-names = "mc";
+
+ clocks = <&cgu JZ4725B_CLK_UDC>;
+ clock-names = "udc";
+ };
+
+ lcd: lcd-controller@13050000 {
+ compatible = "ingenic,jz4725b-lcd";
+ reg = <0x13050000 0x130>; /* tbc */
+
+ interrupt-parent = <&intc>;
+ interrupts = <31>;
+
+ clocks = <&cgu JZ4725B_CLK_LCD>;
+ clock-names = "lcd_pclk";
+
+ lcd_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@8 {
+ reg = <8>;
+
+ ipu_output: endpoint {
+ remote-endpoint = <&ipu_input>;
+ };
+ };
+ };
+ };
+
+ ipu: ipu@13080000 {
+ compatible = "ingenic,jz4725b-ipu";
+ reg = <0x13080000 0x64>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <30>;
+
+ clocks = <&cgu JZ4725B_CLK_IPU>;
+ clock-names = "ipu";
+
+ port {
+ ipu_input: endpoint {
+ remote-endpoint = <&ipu_output>;
+ };
+ };
+ };
+
+ bch: ecc-controller@130d0000 {
+ compatible = "ingenic,jz4725b-bch";
+ reg = <0x130d0000 0x44>;
+
+ clocks = <&cgu JZ4725B_CLK_BCH>;
+ };
+
+ rom: memory@1fc00000 {
+ compatible = "mtd-rom";
+ reg = <0x1fc00000 0x2000>;
+
+ bank-width = <4>;
+ device-width = <1>;
+ };
+};
diff --git a/src/mips/ingenic/jz4740.dtsi b/src/mips/ingenic/jz4740.dtsi
new file mode 100644
index 0000000..bdd6f4d
--- /dev/null
+++ b/src/mips/ingenic/jz4740.dtsi
@@ -0,0 +1,331 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/ingenic,jz4740-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ingenic,jz4740";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-mxu1.0";
+ reg = <0>;
+
+ clocks = <&cgu JZ4740_CLK_CCLK>;
+ clock-names = "cpu";
+ };
+ };
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ intc: interrupt-controller@10001000 {
+ compatible = "ingenic,jz4740-intc";
+ reg = <0x10001000 0x14>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ ext: ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ rtc: rtc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ cgu: jz4740-cgu@10000000 {
+ compatible = "ingenic,jz4740-cgu";
+ reg = <0x10000000 0x100>;
+
+ clocks = <&ext>, <&rtc>;
+ clock-names = "ext", "rtc";
+
+ #clock-cells = <1>;
+ };
+
+ tcu: timer@10002000 {
+ compatible = "ingenic,jz4740-tcu", "simple-mfd";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu JZ4740_CLK_RTC>,
+ <&cgu JZ4740_CLK_EXT>,
+ <&cgu JZ4740_CLK_PCLK>,
+ <&cgu JZ4740_CLK_TCU>;
+ clock-names = "rtc", "ext", "pclk", "tcu";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <23 22 21>;
+
+ watchdog: watchdog@0 {
+ compatible = "ingenic,jz4740-watchdog";
+ reg = <0x0 0xc>;
+
+ clocks = <&tcu TCU_CLK_WDT>;
+ clock-names = "wdt";
+ };
+
+ pwm: pwm@40 {
+ compatible = "ingenic,jz4740-pwm";
+ reg = <0x40 0x80>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+ <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
+ <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
+ clock-names = "timer0", "timer1", "timer2", "timer3",
+ "timer4", "timer5", "timer6", "timer7";
+ };
+ };
+
+ rtc_dev: rtc@10003000 {
+ compatible = "ingenic,jz4740-rtc";
+ reg = <0x10003000 0x40>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <15>;
+
+ clocks = <&cgu JZ4740_CLK_RTC>;
+ clock-names = "rtc";
+ };
+
+ pinctrl: pin-controller@10010000 {
+ compatible = "ingenic,jz4740-pinctrl";
+ reg = <0x10010000 0x400>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpa: gpio@0 {
+ compatible = "ingenic,jz4740-gpio";
+ reg = <0>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <28>;
+ };
+
+ gpb: gpio@1 {
+ compatible = "ingenic,jz4740-gpio";
+ reg = <1>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 32 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27>;
+ };
+
+ gpc: gpio@2 {
+ compatible = "ingenic,jz4740-gpio";
+ reg = <2>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 64 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <26>;
+ };
+
+ gpd: gpio@3 {
+ compatible = "ingenic,jz4740-gpio";
+ reg = <3>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 96 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <25>;
+ };
+ };
+
+ aic: audio-controller@10020000 {
+ compatible = "ingenic,jz4740-i2s";
+ reg = <0x10020000 0x38>;
+
+ #sound-dai-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <18>;
+
+ clocks = <&cgu JZ4740_CLK_AIC>, <&cgu JZ4740_CLK_I2S>;
+ clock-names = "aic", "i2s";
+
+ dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>;
+ dma-names = "rx", "tx";
+ };
+
+ codec: audio-codec@100200a4 {
+ compatible = "ingenic,jz4740-codec";
+ reg = <0x10020080 0x8>;
+
+ #sound-dai-cells = <0>;
+
+ clocks = <&cgu JZ4740_CLK_AIC>;
+ clock-names = "aic";
+ };
+
+ mmc: mmc@10021000 {
+ compatible = "ingenic,jz4740-mmc";
+ reg = <0x10021000 0x1000>;
+
+ clocks = <&cgu JZ4740_CLK_MMC>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <14>;
+
+ dmas = <&dmac 27 0xffffffff>, <&dmac 26 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+ };
+
+ uart0: serial@10030000 {
+ compatible = "ingenic,jz4740-uart";
+ reg = <0x10030000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <9>;
+
+ clocks = <&ext>, <&cgu JZ4740_CLK_UART0>;
+ clock-names = "baud", "module";
+ };
+
+ uart1: serial@10031000 {
+ compatible = "ingenic,jz4740-uart";
+ reg = <0x10031000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <8>;
+
+ clocks = <&ext>, <&cgu JZ4740_CLK_UART1>;
+ clock-names = "baud", "module";
+ };
+
+ adc: adc@10070000 {
+ compatible = "ingenic,jz4740-adc";
+ reg = <0x10070000 0x30>;
+ #io-channel-cells = <1>;
+
+ clocks = <&cgu JZ4740_CLK_ADC>;
+ clock-names = "adc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <12>;
+ };
+
+ nemc: memory-controller@13010000 {
+ compatible = "ingenic,jz4740-nemc";
+ reg = <0x13010000 0x54>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <1 0 0x18000000 0x4000000>,
+ <2 0 0x14000000 0x4000000>,
+ <3 0 0x0c000000 0x4000000>,
+ <4 0 0x08000000 0x4000000>;
+
+ clocks = <&cgu JZ4740_CLK_MCLK>;
+ };
+
+ ecc: ecc-controller@13010100 {
+ compatible = "ingenic,jz4740-ecc";
+ reg = <0x13010100 0x2C>;
+
+ clocks = <&cgu JZ4740_CLK_MCLK>;
+ };
+
+ dmac: dma-controller@13020000 {
+ compatible = "ingenic,jz4740-dma";
+ reg = <0x13020000 0xbc>, <0x13020300 0x14>;
+ #dma-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
+
+ clocks = <&cgu JZ4740_CLK_DMA>;
+ };
+
+ uhc: usb@13030000 {
+ compatible = "ingenic,jz4740-ohci", "generic-ohci";
+ reg = <0x13030000 0x1000>;
+
+ clocks = <&cgu JZ4740_CLK_UHC>;
+ assigned-clocks = <&cgu JZ4740_CLK_UHC>;
+ assigned-clock-rates = <48000000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <3>;
+
+ status = "disabled";
+ };
+
+ udc: usb@13040000 {
+ compatible = "ingenic,jz4740-musb";
+ reg = <0x13040000 0x10000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <24>;
+ interrupt-names = "mc";
+
+ clocks = <&cgu JZ4740_CLK_UDC>;
+ clock-names = "udc";
+ };
+
+ lcd: lcd-controller@13050000 {
+ compatible = "ingenic,jz4740-lcd";
+ reg = <0x13050000 0x60>; /* LCDCMD1+4 */
+
+ interrupt-parent = <&intc>;
+ interrupts = <30>;
+
+ clocks = <&cgu JZ4740_CLK_LCD_PCLK>, <&cgu JZ4740_CLK_LCD>;
+ clock-names = "lcd_pclk", "lcd";
+ };
+};
diff --git a/src/mips/ingenic/jz4770.dtsi b/src/mips/ingenic/jz4770.dtsi
new file mode 100644
index 0000000..504e895
--- /dev/null
+++ b/src/mips/ingenic/jz4770.dtsi
@@ -0,0 +1,469 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/ingenic,jz4770-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ingenic,jz4770";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+ reg = <0>;
+
+ clocks = <&cgu JZ4770_CLK_CCLK>;
+ clock-names = "cpu";
+ };
+ };
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ intc: interrupt-controller@10001000 {
+ compatible = "ingenic,jz4770-intc";
+ reg = <0x10001000 0x40>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ ext: ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ osc32k: osc32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ cgu: jz4770-cgu@10000000 {
+ compatible = "ingenic,jz4770-cgu", "simple-mfd";
+ reg = <0x10000000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10000000 0x100>;
+
+ clocks = <&ext>, <&osc32k>;
+ clock-names = "ext", "osc32k";
+
+ #clock-cells = <1>;
+
+ otg_phy: usb-phy@3c {
+ compatible = "ingenic,jz4770-phy";
+ reg = <0x3c 0x10>;
+
+ clocks = <&cgu JZ4770_CLK_OTG_PHY>;
+
+ #phy-cells = <0>;
+ };
+ };
+
+ tcu: timer@10002000 {
+ compatible = "ingenic,jz4770-tcu", "simple-mfd";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu JZ4770_CLK_RTC>,
+ <&cgu JZ4770_CLK_EXT>,
+ <&cgu JZ4770_CLK_PCLK>;
+ clock-names = "rtc", "ext", "pclk";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27 26 25>;
+
+ watchdog: watchdog@0 {
+ compatible = "ingenic,jz4770-watchdog",
+ "ingenic,jz4740-watchdog";
+ reg = <0x0 0xc>;
+
+ clocks = <&tcu TCU_CLK_WDT>;
+ clock-names = "wdt";
+ };
+
+ pwm: pwm@40 {
+ compatible = "ingenic,jz4770-pwm", "ingenic,jz4740-pwm";
+ reg = <0x40 0x80>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+ <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
+ <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
+ clock-names = "timer0", "timer1", "timer2", "timer3",
+ "timer4", "timer5", "timer6", "timer7";
+ };
+
+ ost: timer@e0 {
+ compatible = "ingenic,jz4770-ost";
+ reg = <0xe0 0x20>;
+
+ clocks = <&tcu TCU_CLK_OST>;
+ clock-names = "ost";
+
+ interrupts = <15>;
+ };
+ };
+
+ rtc: rtc@10003000 {
+ compatible = "ingenic,jz4770-rtc", "ingenic,jz4760-rtc";
+ reg = <0x10003000 0x40>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <32>;
+ };
+
+ pinctrl: pin-controller@10010000 {
+ compatible = "ingenic,jz4770-pinctrl";
+ reg = <0x10010000 0x600>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpa: gpio@0 {
+ compatible = "ingenic,jz4770-gpio";
+ reg = <0>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <17>;
+ };
+
+ gpb: gpio@1 {
+ compatible = "ingenic,jz4770-gpio";
+ reg = <1>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 32 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <16>;
+ };
+
+ gpc: gpio@2 {
+ compatible = "ingenic,jz4770-gpio";
+ reg = <2>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 64 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <15>;
+ };
+
+ gpd: gpio@3 {
+ compatible = "ingenic,jz4770-gpio";
+ reg = <3>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 96 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <14>;
+ };
+
+ gpe: gpio@4 {
+ compatible = "ingenic,jz4770-gpio";
+ reg = <4>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 128 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <13>;
+ };
+
+ gpf: gpio@5 {
+ compatible = "ingenic,jz4770-gpio";
+ reg = <5>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 160 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <12>;
+ };
+ };
+
+ aic: audio-controller@10020000 {
+ compatible = "ingenic,jz4770-i2s";
+ reg = <0x10020000 0x94>;
+
+ #sound-dai-cells = <0>;
+
+ clocks = <&cgu JZ4770_CLK_AIC>, <&cgu JZ4770_CLK_I2S>;
+ clock-names = "aic", "i2s";
+
+ interrupt-parent = <&intc>;
+ interrupts = <34>;
+
+ dmas = <&dmac0 25 0xffffffff>, <&dmac0 24 0xffffffff>;
+ dma-names = "rx", "tx";
+ };
+
+ codec: audio-codec@100200a0 {
+ compatible = "ingenic,jz4770-codec";
+ reg = <0x100200a4 0x8>;
+
+ #sound-dai-cells = <0>;
+
+ clocks = <&cgu JZ4770_CLK_AIC>;
+ clock-names = "aic";
+ };
+
+ mmc0: mmc@10021000 {
+ compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+ reg = <0x10021000 0x1000>;
+
+ clocks = <&cgu JZ4770_CLK_MMC0>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <37>;
+
+ dmas = <&dmac1 27 0xffffffff>, <&dmac1 26 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ status = "disabled";
+ };
+
+ mmc1: mmc@10022000 {
+ compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+ reg = <0x10022000 0x1000>;
+
+ clocks = <&cgu JZ4770_CLK_MMC1>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <36>;
+
+ dmas = <&dmac1 31 0xffffffff>, <&dmac1 30 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ status = "disabled";
+ };
+
+ mmc2: mmc@10023000 {
+ compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+ reg = <0x10023000 0x1000>;
+
+ clocks = <&cgu JZ4770_CLK_MMC2>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <35>;
+
+ dmas = <&dmac1 37 0xffffffff>, <&dmac1 36 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ status = "disabled";
+ };
+
+ uart0: serial@10030000 {
+ compatible = "ingenic,jz4770-uart";
+ reg = <0x10030000 0x100>;
+
+ clocks = <&ext>, <&cgu JZ4770_CLK_UART0>;
+ clock-names = "baud", "module";
+
+ interrupt-parent = <&intc>;
+ interrupts = <5>;
+
+ status = "disabled";
+ };
+
+ uart1: serial@10031000 {
+ compatible = "ingenic,jz4770-uart";
+ reg = <0x10031000 0x100>;
+
+ clocks = <&ext>, <&cgu JZ4770_CLK_UART1>;
+ clock-names = "baud", "module";
+
+ interrupt-parent = <&intc>;
+ interrupts = <4>;
+
+ status = "disabled";
+ };
+
+ uart2: serial@10032000 {
+ compatible = "ingenic,jz4770-uart";
+ reg = <0x10032000 0x100>;
+
+ clocks = <&ext>, <&cgu JZ4770_CLK_UART2>;
+ clock-names = "baud", "module";
+
+ interrupt-parent = <&intc>;
+ interrupts = <3>;
+
+ status = "disabled";
+ };
+
+ uart3: serial@10033000 {
+ compatible = "ingenic,jz4770-uart";
+ reg = <0x10033000 0x100>;
+
+ clocks = <&ext>, <&cgu JZ4770_CLK_UART3>;
+ clock-names = "baud", "module";
+
+ interrupt-parent = <&intc>;
+ interrupts = <2>;
+
+ status = "disabled";
+ };
+
+ adc: adc@10070000 {
+ compatible = "ingenic,jz4770-adc";
+ reg = <0x10070000 0x30>;
+
+ #io-channel-cells = <1>;
+
+ clocks = <&cgu JZ4770_CLK_ADC>;
+ clock-names = "adc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <18>;
+ };
+
+ gpu: gpu@13040000 {
+ compatible = "vivante,gc";
+ reg = <0x13040000 0x10000>;
+
+ clocks = <&cgu JZ4770_CLK_GPU>,
+ <&cgu JZ4770_CLK_GPU>,
+ <&cgu JZ4770_CLK_GPU>;
+ clock-names = "bus", "core", "shader";
+
+ interrupt-parent = <&intc>;
+ interrupts = <6>;
+ };
+
+ lcd: lcd-controller@13050000 {
+ compatible = "ingenic,jz4770-lcd";
+ reg = <0x13050000 0x130>; /* tbc */
+
+ interrupt-parent = <&intc>;
+ interrupts = <31>;
+
+ clocks = <&cgu JZ4770_CLK_LPCLK_MUX>;
+ clock-names = "lcd_pclk";
+ };
+
+ dmac0: dma-controller@13420000 {
+ compatible = "ingenic,jz4770-dma";
+ reg = <0x13420000 0xC0>, <0x13420300 0x20>;
+
+ #dma-cells = <2>;
+
+ clocks = <&cgu JZ4770_CLK_DMA>;
+ interrupt-parent = <&intc>;
+ interrupts = <24>;
+ };
+
+ dmac1: dma-controller@13420100 {
+ compatible = "ingenic,jz4770-dma";
+ reg = <0x13420100 0xC0>, <0x13420400 0x20>;
+
+ #dma-cells = <2>;
+
+ clocks = <&cgu JZ4770_CLK_DMA>;
+ interrupt-parent = <&intc>;
+ interrupts = <23>;
+ };
+
+ uhc: usb@13430000 {
+ compatible = "generic-ohci";
+ reg = <0x13430000 0x1000>;
+
+ clocks = <&cgu JZ4770_CLK_UHC>, <&cgu JZ4770_CLK_UHC_PHY>;
+ assigned-clocks = <&cgu JZ4770_CLK_UHC>;
+ assigned-clock-rates = <48000000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
+
+ status = "disabled";
+ };
+
+ usb_otg: usb@13440000 {
+ compatible = "ingenic,jz4770-musb";
+ reg = <0x13440000 0x10000>;
+
+ clocks = <&cgu JZ4770_CLK_OTG>;
+ clock-names = "udc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <21>;
+ interrupt-names = "mc";
+
+ phys = <&otg_phy>;
+
+ usb-role-switch;
+ };
+
+ rom: memory@1fc00000 {
+ compatible = "mtd-rom";
+ reg = <0x1fc00000 0x2000>;
+
+ bank-width = <4>;
+ device-width = <1>;
+ };
+};
diff --git a/src/mips/ingenic/jz4780.dtsi b/src/mips/ingenic/jz4780.dtsi
new file mode 100644
index 0000000..18affff
--- /dev/null
+++ b/src/mips/ingenic/jz4780.dtsi
@@ -0,0 +1,600 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/dma/jz4780-dma.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ingenic,jz4780";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+ reg = <0>;
+
+ clocks = <&cgu JZ4780_CLK_CPU>;
+ clock-names = "cpu";
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+ reg = <1>;
+
+ clocks = <&cgu JZ4780_CLK_CORE1>;
+ clock-names = "cpu";
+ };
+ };
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ intc: interrupt-controller@10001000 {
+ compatible = "ingenic,jz4780-intc";
+ reg = <0x10001000 0x50>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ ext: ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ rtc: rtc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ cgu: jz4780-cgu@10000000 {
+ compatible = "ingenic,jz4780-cgu", "simple-mfd";
+ reg = <0x10000000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10000000 0x100>;
+
+ #clock-cells = <1>;
+
+ clocks = <&ext>, <&rtc>;
+ clock-names = "ext", "rtc";
+
+ otg_phy: usb-phy@3c {
+ compatible = "ingenic,jz4780-phy";
+ reg = <0x3c 0x10>;
+
+ clocks = <&cgu JZ4780_CLK_OTG1>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ rng: rng@d8 {
+ compatible = "ingenic,jz4780-rng";
+ reg = <0xd8 0x8>;
+
+ status = "disabled";
+ };
+ };
+
+ tcu: timer@10002000 {
+ compatible = "ingenic,jz4780-tcu",
+ "ingenic,jz4770-tcu",
+ "simple-mfd";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu JZ4780_CLK_RTCLK>,
+ <&cgu JZ4780_CLK_EXCLK>,
+ <&cgu JZ4780_CLK_PCLK>;
+ clock-names = "rtc", "ext", "pclk";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27 26 25>;
+
+ watchdog: watchdog@0 {
+ compatible = "ingenic,jz4780-watchdog";
+ reg = <0x0 0xc>;
+
+ clocks = <&tcu TCU_CLK_WDT>;
+ clock-names = "wdt";
+ };
+
+ pwm: pwm@40 {
+ compatible = "ingenic,jz4780-pwm", "ingenic,jz4740-pwm";
+ reg = <0x40 0x80>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+ <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
+ <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
+ clock-names = "timer0", "timer1", "timer2", "timer3",
+ "timer4", "timer5", "timer6", "timer7";
+ };
+
+ ost: timer@e0 {
+ compatible = "ingenic,jz4780-ost", "ingenic,jz4770-ost";
+ reg = <0xe0 0x20>;
+
+ clocks = <&tcu TCU_CLK_OST>;
+ clock-names = "ost";
+
+ interrupts = <15>;
+ };
+ };
+
+ rtc_dev: rtc@10003000 {
+ compatible = "ingenic,jz4780-rtc";
+ reg = <0x10003000 0x4c>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <32>;
+
+ clocks = <&cgu JZ4780_CLK_RTCLK>;
+ clock-names = "rtc";
+
+ #clock-cells = <0>;
+ };
+
+ pinctrl: pin-controller@10010000 {
+ compatible = "ingenic,jz4780-pinctrl";
+ reg = <0x10010000 0x600>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpa: gpio@0 {
+ compatible = "ingenic,jz4780-gpio";
+ reg = <0>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <17>;
+ };
+
+ gpb: gpio@1 {
+ compatible = "ingenic,jz4780-gpio";
+ reg = <1>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 32 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <16>;
+ };
+
+ gpc: gpio@2 {
+ compatible = "ingenic,jz4780-gpio";
+ reg = <2>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 64 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <15>;
+ };
+
+ gpd: gpio@3 {
+ compatible = "ingenic,jz4780-gpio";
+ reg = <3>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 96 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <14>;
+ };
+
+ gpe: gpio@4 {
+ compatible = "ingenic,jz4780-gpio";
+ reg = <4>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 128 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <13>;
+ };
+
+ gpf: gpio@5 {
+ compatible = "ingenic,jz4780-gpio";
+ reg = <5>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 160 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <12>;
+ };
+ };
+
+ spi0: spi@10043000 {
+ compatible = "ingenic,jz4780-spi";
+ reg = <0x10043000 0x1c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <8>;
+
+ clocks = <&cgu JZ4780_CLK_SSI0>;
+ clock-names = "spi";
+
+ dmas = <&dma JZ4780_DMA_SSI0_RX 0xffffffff>,
+ <&dma JZ4780_DMA_SSI0_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
+ uart0: serial@10030000 {
+ compatible = "ingenic,jz4780-uart";
+ reg = <0x10030000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <51>;
+
+ clocks = <&ext>, <&cgu JZ4780_CLK_UART0>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ uart1: serial@10031000 {
+ compatible = "ingenic,jz4780-uart";
+ reg = <0x10031000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <50>;
+
+ clocks = <&ext>, <&cgu JZ4780_CLK_UART1>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ uart2: serial@10032000 {
+ compatible = "ingenic,jz4780-uart";
+ reg = <0x10032000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <49>;
+
+ clocks = <&ext>, <&cgu JZ4780_CLK_UART2>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ uart3: serial@10033000 {
+ compatible = "ingenic,jz4780-uart";
+ reg = <0x10033000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <48>;
+
+ clocks = <&ext>, <&cgu JZ4780_CLK_UART3>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ uart4: serial@10034000 {
+ compatible = "ingenic,jz4780-uart";
+ reg = <0x10034000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <34>;
+
+ clocks = <&ext>, <&cgu JZ4780_CLK_UART4>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ spi1: spi@10044000 {
+ compatible = "ingenic,jz4780-spi";
+ reg = <0x10044000 0x1c>;
+ #address-cells = <1>;
+ #size-sells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <7>;
+
+ clocks = <&cgu JZ4780_CLK_SSI1>;
+ clock-names = "spi";
+
+ dmas = <&dma JZ4780_DMA_SSI1_RX 0xffffffff>,
+ <&dma JZ4780_DMA_SSI1_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
+ i2c0: i2c@10050000 {
+ compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0x10050000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <60>;
+
+ clocks = <&cgu JZ4780_CLK_SMB0>;
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c0_data>;
+
+ status = "disabled";
+ };
+
+ i2c1: i2c@10051000 {
+ compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10051000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <59>;
+
+ clocks = <&cgu JZ4780_CLK_SMB1>;
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c1_data>;
+
+ status = "disabled";
+ };
+
+ i2c2: i2c@10052000 {
+ compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10052000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <58>;
+
+ clocks = <&cgu JZ4780_CLK_SMB2>;
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c2_data>;
+
+ status = "disabled";
+ };
+
+ i2c3: i2c@10053000 {
+ compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10053000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <57>;
+
+ clocks = <&cgu JZ4780_CLK_SMB3>;
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c3_data>;
+
+ status = "disabled";
+ };
+
+ i2c4: i2c@10054000 {
+ compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10054000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <56>;
+
+ clocks = <&cgu JZ4780_CLK_SMB4>;
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c4_data>;
+
+ status = "disabled";
+ };
+
+ hdmi: hdmi@10180000 {
+ compatible = "ingenic,jz4780-dw-hdmi";
+ reg = <0x10180000 0x8000>;
+ reg-io-width = <4>;
+
+ clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>;
+ clock-names = "iahb", "isfr";
+
+ interrupt-parent = <&intc>;
+ interrupts = <3>;
+
+ status = "disabled";
+ };
+
+ lcdc0: lcdc0@13050000 {
+ compatible = "ingenic,jz4780-lcd";
+ reg = <0x13050000 0x1800>;
+
+ clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD0PIXCLK>;
+ clock-names = "lcd", "lcd_pclk";
+
+ interrupt-parent = <&intc>;
+ interrupts = <31>;
+
+ status = "disabled";
+ };
+
+ lcdc1: lcdc1@130a0000 {
+ compatible = "ingenic,jz4780-lcd";
+ reg = <0x130a0000 0x1800>;
+
+ clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD1PIXCLK>;
+ clock-names = "lcd", "lcd_pclk";
+
+ interrupt-parent = <&intc>;
+ interrupts = <23>;
+
+ status = "disabled";
+ };
+
+ nemc: nemc@13410000 {
+ compatible = "ingenic,jz4780-nemc", "simple-mfd";
+ reg = <0x13410000 0x10000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x13410000 0x10000>,
+ <1 0 0x1b000000 0x1000000>,
+ <2 0 0x1a000000 0x1000000>,
+ <3 0 0x19000000 0x1000000>,
+ <4 0 0x18000000 0x1000000>,
+ <5 0 0x17000000 0x1000000>,
+ <6 0 0x16000000 0x1000000>;
+
+ clocks = <&cgu JZ4780_CLK_NEMC>;
+
+ status = "disabled";
+
+ efuse: efuse@d0 {
+ reg = <0 0xd0 0x30>;
+ compatible = "ingenic,jz4780-efuse";
+
+ clocks = <&cgu JZ4780_CLK_AHB2>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eth0_addr: eth-mac-addr@22 {
+ reg = <0x22 0x6>;
+ };
+ };
+ };
+
+ dma: dma@13420000 {
+ compatible = "ingenic,jz4780-dma";
+ reg = <0x13420000 0x400>, <0x13421000 0x40>;
+ #dma-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <10>;
+
+ clocks = <&cgu JZ4780_CLK_PDMA>;
+ };
+
+ mmc0: mmc@13450000 {
+ compatible = "ingenic,jz4780-mmc";
+ reg = <0x13450000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <37>;
+
+ clocks = <&cgu JZ4780_CLK_MSC0>;
+ clock-names = "mmc";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+ dmas = <&dma JZ4780_DMA_MSC0_RX 0xffffffff>,
+ <&dma JZ4780_DMA_MSC0_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
+ mmc1: mmc@13460000 {
+ compatible = "ingenic,jz4780-mmc";
+ reg = <0x13460000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <36>;
+
+ clocks = <&cgu JZ4780_CLK_MSC1>;
+ clock-names = "mmc";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+ dmas = <&dma JZ4780_DMA_MSC1_RX 0xffffffff>,
+ <&dma JZ4780_DMA_MSC1_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
+ bch: bch@134d0000 {
+ compatible = "ingenic,jz4780-bch";
+ reg = <0x134d0000 0x10000>;
+
+ clocks = <&cgu JZ4780_CLK_BCH>;
+
+ status = "disabled";
+ };
+
+ otg: usb@13500000 {
+ compatible = "ingenic,jz4780-otg";
+ reg = <0x13500000 0x40000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <21>;
+
+ clocks = <&cgu JZ4780_CLK_UHC>;
+ clock-names = "otg";
+
+ phys = <&otg_phy>;
+ phy-names = "usb2-phy";
+
+ g-rx-fifo-size = <768>;
+ g-np-tx-fifo-size = <256>;
+ g-tx-fifo-size = <256 256 256 256 256 256 256 512>;
+
+ status = "disabled";
+ };
+};
diff --git a/src/mips/ingenic/qi_lb60.dts b/src/mips/ingenic/qi_lb60.dts
new file mode 100644
index 0000000..24f9872
--- /dev/null
+++ b/src/mips/ingenic/qi_lb60.dts
@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "jz4740.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/adc/ingenic,adc.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/input/input.h>
+
+#define KEY_QI_QI KEY_F13
+#define KEY_QI_UPRED KEY_RIGHTALT
+#define KEY_QI_VOLUP KEY_VOLUMEUP
+#define KEY_QI_VOLDOWN KEY_VOLUMEDOWN
+#define KEY_QI_FN KEY_LEFTCTRL
+
+/ {
+ compatible = "qi,lb60", "ingenic,jz4740";
+ model = "Ben Nanonote";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ vcc: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ mmc_power: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "mmc_vcc";
+ gpio = <&gpd 2 0>;
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ amp_supply: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "amp_supply";
+ gpio = <&gpd 4 0>;
+ enable-active-high;
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ amp: analog-amplifier {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpb 29 GPIO_ACTIVE_HIGH>;
+ VCC-supply = <&_supply>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,name = "QI LB60";
+ simple-audio-card,format = "i2s";
+
+ simple-audio-card,widgets =
+ "Speaker", "Speaker",
+ "Microphone", "Mic";
+ simple-audio-card,routing =
+ "MIC", "Mic",
+ "Speaker", "OUTL",
+ "Speaker", "OUTR",
+ "INL", "LOUT",
+ "INR", "ROUT";
+
+ simple-audio-card,aux-devs = <&>;
+
+ simple-audio-card,bitclock-master = <&dai_codec>;
+ simple-audio-card,frame-master = <&dai_codec>;
+
+ dai_cpu: simple-audio-card,cpu {
+ sound-dai = <&aic>;
+ };
+
+ dai_codec: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ key {
+ label = "Power";
+ wakeup-source;
+ linux,code = <KEY_POWER>;
+ gpios = <&gpd 29 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keyboard {
+ compatible = "gpio-matrix-keypad";
+
+ col-scan-delay-us = <10>;
+ debounce-delay-ms = <10>;
+ wakeup-source;
+
+ row-gpios = <&gpd 18 0>, <&gpd 19 0>, <&gpd 20 0>, <&gpd 21 0>,
+ <&gpd 22 0>, <&gpd 23 0>, <&gpd 24 0>, <&gpd 26 0>;
+ col-gpios = <&gpc 10 0>, <&gpc 11 0>, <&gpc 12 0>, <&gpc 13 0>,
+ <&gpc 14 0>, <&gpc 15 0>, <&gpc 16 0>, <&gpc 17 0>;
+ gpio-activelow;
+
+ linux,keymap =
+ <MATRIX_KEY(0, 0, KEY_F1)>, /* S2 */
+ <MATRIX_KEY(0, 1, KEY_F2)>, /* S3 */
+ <MATRIX_KEY(0, 2, KEY_F3)>, /* S4 */
+ <MATRIX_KEY(0, 3, KEY_F4)>, /* S5 */
+ <MATRIX_KEY(0, 4, KEY_F5)>, /* S6 */
+ <MATRIX_KEY(0, 5, KEY_F6)>, /* S7 */
+ <MATRIX_KEY(0, 6, KEY_F7)>, /* S8 */
+
+ <MATRIX_KEY(1, 0, KEY_Q)>, /* S10 */
+ <MATRIX_KEY(1, 1, KEY_W)>, /* S11 */
+ <MATRIX_KEY(1, 2, KEY_E)>, /* S12 */
+ <MATRIX_KEY(1, 3, KEY_R)>, /* S13 */
+ <MATRIX_KEY(1, 4, KEY_T)>, /* S14 */
+ <MATRIX_KEY(1, 5, KEY_Y)>, /* S15 */
+ <MATRIX_KEY(1, 6, KEY_U)>, /* S16 */
+ <MATRIX_KEY(1, 7, KEY_I)>, /* S17 */
+ <MATRIX_KEY(2, 0, KEY_A)>, /* S18 */
+ <MATRIX_KEY(2, 1, KEY_S)>, /* S19 */
+ <MATRIX_KEY(2, 2, KEY_D)>, /* S20 */
+ <MATRIX_KEY(2, 3, KEY_F)>, /* S21 */
+ <MATRIX_KEY(2, 4, KEY_G)>, /* S22 */
+ <MATRIX_KEY(2, 5, KEY_H)>, /* S23 */
+ <MATRIX_KEY(2, 6, KEY_J)>, /* S24 */
+ <MATRIX_KEY(2, 7, KEY_K)>, /* S25 */
+ <MATRIX_KEY(3, 0, KEY_ESC)>, /* S26 */
+ <MATRIX_KEY(3, 1, KEY_Z)>, /* S27 */
+ <MATRIX_KEY(3, 2, KEY_X)>, /* S28 */
+ <MATRIX_KEY(3, 3, KEY_C)>, /* S29 */
+ <MATRIX_KEY(3, 4, KEY_V)>, /* S30 */
+ <MATRIX_KEY(3, 5, KEY_B)>, /* S31 */
+ <MATRIX_KEY(3, 6, KEY_N)>, /* S32 */
+ <MATRIX_KEY(3, 7, KEY_M)>, /* S33 */
+ <MATRIX_KEY(4, 0, KEY_TAB)>, /* S34 */
+ <MATRIX_KEY(4, 1, KEY_CAPSLOCK)>, /* S35 */
+ <MATRIX_KEY(4, 2, KEY_BACKSLASH)>, /* S36 */
+ <MATRIX_KEY(4, 3, KEY_APOSTROPHE)>, /* S37 */
+ <MATRIX_KEY(4, 4, KEY_COMMA)>, /* S38 */
+ <MATRIX_KEY(4, 5, KEY_DOT)>, /* S39 */
+ <MATRIX_KEY(4, 6, KEY_SLASH)>, /* S40 */
+ <MATRIX_KEY(4, 7, KEY_UP)>, /* S41 */
+ <MATRIX_KEY(5, 0, KEY_O)>, /* S42 */
+ <MATRIX_KEY(5, 1, KEY_L)>, /* S43 */
+ <MATRIX_KEY(5, 2, KEY_EQUAL)>, /* S44 */
+ <MATRIX_KEY(5, 3, KEY_QI_UPRED)>, /* S45 */
+ <MATRIX_KEY(5, 4, KEY_SPACE)>, /* S46 */
+ <MATRIX_KEY(5, 5, KEY_QI_QI)>, /* S47 */
+ <MATRIX_KEY(5, 6, KEY_RIGHTCTRL)>, /* S48 */
+ <MATRIX_KEY(5, 7, KEY_LEFT)>, /* S49 */
+ <MATRIX_KEY(6, 0, KEY_F8)>, /* S50 */
+ <MATRIX_KEY(6, 1, KEY_P)>, /* S51 */
+ <MATRIX_KEY(6, 2, KEY_BACKSPACE)>,/* S52 */
+ <MATRIX_KEY(6, 3, KEY_ENTER)>, /* S53 */
+ <MATRIX_KEY(6, 4, KEY_QI_VOLUP)>, /* S54 */
+ <MATRIX_KEY(6, 5, KEY_QI_VOLDOWN)>, /* S55 */
+ <MATRIX_KEY(6, 6, KEY_DOWN)>, /* S56 */
+ <MATRIX_KEY(6, 7, KEY_RIGHT)>, /* S57 */
+
+ <MATRIX_KEY(7, 0, KEY_LEFTSHIFT)>, /* S58 */
+ <MATRIX_KEY(7, 1, KEY_LEFTALT)>, /* S59 */
+ <MATRIX_KEY(7, 2, KEY_QI_FN)>; /* S60 */
+ };
+
+ spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpc 23 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpc 22 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpc 21 GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+ };
+
+ usb_charger: charger {
+ compatible = "gpio-charger";
+ charger-type = "usb-sdp";
+ gpios = <&gpd 28 GPIO_ACTIVE_LOW>;
+ status-gpios = <&gpc 27 GPIO_ACTIVE_LOW>;
+ };
+
+ simple_battery: battery {
+ compatible = "simple-battery";
+ voltage-min-design-microvolt = <3600000>;
+ voltage-max-design-microvolt = <4200000>;
+ };
+
+ pmu {
+ compatible = "ingenic,jz4740-battery";
+ io-channels = <&adc INGENIC_ADC_BATTERY>;
+ io-channel-names = "battery";
+ power-supplies = <&usb_charger>;
+ monitored-battery = <&simple_battery>;
+ };
+
+ hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc INGENIC_ADC_AUX>;
+ };
+
+ panel: panel {
+ compatible = "giantplus,gpm940b0";
+
+ power-supply = <&vcc>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+
+ usb_phy: usb-phy {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+
+ vcc-supply = <&vcc>;
+ };
+};
+
+&ext {
+ clock-frequency = <12000000>;
+};
+
+&rtc_dev {
+ system-power-controller;
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart0>;
+};
+
+&uart1 {
+ status = "disabled";
+};
+
+&nemc {
+ nandc: nand-controller@1 {
+ compatible = "ingenic,jz4740-nand";
+ reg = <1 0 0x4000000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ecc-engine = <&ecc>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_nemc>;
+
+ rb-gpios = <&gpc 30 GPIO_ACTIVE_HIGH>;
+
+ nand@1 {
+ reg = <1>;
+
+ nand-ecc-step-size = <512>;
+ nand-ecc-strength = <4>;
+ nand-ecc-mode = "hw";
+ nand-is-boot-medium;
+ nand-on-flash-bbt;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x0 0x400000>;
+ };
+
+ partition@400000 {
+ label = "kernel";
+ reg = <0x400000 0x400000>;
+ };
+
+ partition@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x0>;
+ };
+ };
+ };
+ };
+};
+
+&lcd {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_lcd>;
+
+ port {
+ panel_output: endpoint {
+ remote-endpoint = <&panel_input>;
+ };
+ };
+};
+
+&udc {
+ phys = <&usb_phy>;
+};
+
+&pinctrl {
+ pins_lcd: lcd {
+ function = "lcd";
+ groups = "lcd-8bit";
+ };
+
+ pins_nemc: nemc {
+ function = "nand";
+ groups = "nand-fre-fwe", "nand-cs1";
+ };
+
+ pins_uart0: uart0 {
+ function = "uart0";
+ groups = "uart0-data";
+ bias-disable;
+ };
+
+ pins_mmc: mmc {
+ mmc {
+ function = "mmc";
+ groups = "mmc-1bit", "mmc-4bit";
+ bias-disable;
+ };
+
+ mmc-gpios {
+ pins = "PD0", "PD2";
+ bias-disable;
+ };
+ };
+};
+
+&mmc {
+ bus-width = <4>;
+ max-frequency = <24000000>;
+ cd-gpios = <&gpd 0 GPIO_ACTIVE_HIGH>;
+ vmmc-supply = <&mmc_power>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mmc>;
+};
+
+&tcu {
+ /* 750 kHz for the system timer and clocksource */
+ assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>;
+ assigned-clock-rates = <750000>, <750000>;
+};
diff --git a/src/mips/ingenic/rs90.dts b/src/mips/ingenic/rs90.dts
new file mode 100644
index 0000000..e8df70d
--- /dev/null
+++ b/src/mips/ingenic/rs90.dts
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "jz4725b.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/adc/ingenic,adc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+ compatible = "ylm,rs90", "ingenic,jz4725b";
+ model = "RS-90";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vmem: video-memory@1f00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x1f00000 0x100000>;
+ reusable;
+ };
+ };
+
+ vcc: regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vcc";
+ regulaor-min-microvolt = <3300000>;
+ regulaor-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 3 40000 0>;
+
+ brightness-levels = <0 16 32 48 64 80 112 144 192 255>;
+ default-brightness-level = <8>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_pwm3>;
+
+ power-supply = <&vcc>;
+ };
+
+ keys@0 {
+ compatible = "gpio-keys";
+
+ key-0 {
+ label = "D-pad up";
+ linux,code = <KEY_UP>;
+ gpios = <&gpc 10 GPIO_ACTIVE_LOW>;
+ };
+
+ key-1 {
+ label = "D-pad down";
+ linux,code = <KEY_DOWN>;
+ gpios = <&gpc 11 GPIO_ACTIVE_LOW>;
+ };
+
+ key-2 {
+ label = "D-pad left";
+ linux,code = <KEY_LEFT>;
+ gpios = <&gpb 31 GPIO_ACTIVE_LOW>;
+ };
+
+ key-3 {
+ label = "D-pad right";
+ linux,code = <KEY_RIGHT>;
+ gpios = <&gpd 21 GPIO_ACTIVE_LOW>;
+ };
+
+ key-4 {
+ label = "Button A";
+ linux,code = <KEY_LEFTCTRL>;
+ gpios = <&gpc 31 GPIO_ACTIVE_LOW>;
+ };
+
+ key-5 {
+ label = "Button B";
+ linux,code = <KEY_LEFTALT>;
+ gpios = <&gpc 30 GPIO_ACTIVE_LOW>;
+ };
+
+ key-6 {
+ label = "Right shoulder button";
+ linux,code = <KEY_BACKSPACE>;
+ gpios = <&gpc 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <10>;
+ };
+
+ key-7 {
+ label = "Start button";
+ linux,code = <KEY_ENTER>;
+ gpios = <&gpd 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys@1 {
+ compatible = "adc-keys";
+ io-channels = <&adc INGENIC_ADC_AUX>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1400000>;
+ poll-interval = <30>;
+
+ key@0 {
+ label = "Left shoulder button";
+ linux,code = <KEY_TAB>;
+ press-threshold-microvolt = <800000>;
+ };
+
+ key@1 {
+ label = "Select button";
+ linux,code = <KEY_ESC>;
+ press-threshold-microvolt = <1100000>;
+ };
+ };
+
+ amp: analog-amplifier {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpc 15 GPIO_ACTIVE_HIGH>;
+
+ VCC-supply = <&vcc>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,name = "rs90-audio";
+ simple-audio-card,format = "i2s";
+
+ simple-audio-card,widgets =
+ "Speaker", "Speaker",
+ "Headphone", "Headphones";
+ simple-audio-card,routing =
+ "INL", "LHPOUT",
+ "INR", "RHPOUT",
+ "Headphones", "LHPOUT",
+ "Headphones", "RHPOUT",
+ "Speaker", "OUTL",
+ "Speaker", "OUTR";
+ simple-audio-card,pin-switches = "Speaker";
+
+ simple-audio-card,hp-det-gpio = <&gpd 16 GPIO_ACTIVE_LOW>;
+ simple-audio-card,aux-devs = <&>;
+
+ simple-audio-card,bitclock-master = <&dai_codec>;
+ simple-audio-card,frame-master = <&dai_codec>;
+
+ dai_cpu: simple-audio-card,cpu {
+ sound-dai = <&aic>;
+ };
+
+ dai_codec: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+
+ };
+
+ usb_phy: usb-phy {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+
+ clocks = <&cgu JZ4725B_CLK_UDC_PHY>;
+ clock-names = "main_clk";
+ vcc-supply = <&vcc>;
+ };
+
+ panel {
+ compatible = "sharp,ls020b1dd01d";
+
+ backlight = <&backlight>;
+ power-supply = <&vcc>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+};
+
+&ext {
+ clock-frequency = <12000000>;
+};
+
+&rtc_dev {
+ system-power-controller;
+};
+
+&udc {
+ phys = <&usb_phy>;
+};
+
+&pinctrl {
+ pins_mmc1: mmc1 {
+ function = "mmc1";
+ groups = "mmc1-1bit";
+ };
+
+ pins_nemc: nemc {
+ function = "nand";
+ groups = "nand-cs1", "nand-cle-ale", "nand-fre-fwe";
+ };
+
+ pins_pwm3: pwm3 {
+ function = "pwm3";
+ groups = "pwm3";
+ bias-disable;
+ };
+
+ pins_lcd: lcd {
+ function = "lcd";
+ groups = "lcd-8bit", "lcd-16bit", "lcd-special";
+ };
+};
+
+&mmc0 {
+ status = "disabled";
+};
+
+&mmc1 {
+ bus-width = <1>;
+ max-frequency = <48000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mmc1>;
+
+ cd-gpios = <&gpc 20 GPIO_ACTIVE_LOW>;
+};
+
+&uart {
+ /*
+ * The pins for RX/TX are used for the right shoulder button and
+ * backlight PWM.
+ */
+ status = "disabled";
+};
+
+&nemc {
+ nandc: nand-controller@1 {
+ compatible = "ingenic,jz4725b-nand";
+ reg = <1 0 0x4000000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ecc-engine = <&bch>;
+
+ ingenic,nemc-tAS = <10>;
+ ingenic,nemc-tAH = <5>;
+ ingenic,nemc-tBP = <10>;
+ ingenic,nemc-tAW = <15>;
+ ingenic,nemc-tSTRV = <100>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_nemc>;
+
+ rb-gpios = <&gpc 27 GPIO_ACTIVE_HIGH>;
+
+ nand@1 {
+ reg = <1>;
+
+ nand-ecc-step-size = <512>;
+ nand-ecc-strength = <8>;
+ nand-ecc-mode = "hw";
+ nand-is-boot-medium;
+ nand-on-flash-bbt;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x0 0x20000>;
+ };
+
+ partition@20000 {
+ label = "system";
+ reg = <0x20000 0x0>;
+ };
+ };
+ };
+ };
+};
+
+&cgu {
+ /* Use 32kHz oscillator as the parent of the RTC clock */
+ assigned-clocks = <&cgu JZ4725B_CLK_RTC>;
+ assigned-clock-parents = <&cgu JZ4725B_CLK_OSC32K>;
+};
+
+&tcu {
+ /*
+ * 750 kHz for the system timer and clocksource, and use RTC as the
+ * parent for the watchdog clock.
+ */
+ assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, <&tcu TCU_CLK_WDT>;
+ assigned-clock-parents = <0>, <0>, <&cgu JZ4725B_CLK_RTC>;
+ assigned-clock-rates = <750000>, <750000>;
+};
+
+&lcd {
+ memory-region = <&vmem>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_lcd>;
+};
+
+&lcd_ports {
+ port@0 {
+ reg = <0>;
+
+ panel_output: endpoint {
+ remote-endpoint = <&panel_input>;
+ };
+ };
+};
diff --git a/src/mips/ingenic/x1000.dtsi b/src/mips/ingenic/x1000.dtsi
new file mode 100644
index 0000000..cc264cf
--- /dev/null
+++ b/src/mips/ingenic/x1000.dtsi
@@ -0,0 +1,438 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/clock/ingenic,x1000-cgu.h>
+#include <dt-bindings/dma/x1000-dma.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ingenic,x1000", "ingenic,x1000e";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+ reg = <0>;
+
+ clocks = <&cgu X1000_CLK_CPU>;
+ clock-names = "cpu";
+ };
+ };
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ intc: interrupt-controller@10001000 {
+ compatible = "ingenic,x1000-intc", "ingenic,jz4780-intc";
+ reg = <0x10001000 0x50>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ exclk: ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ rtclk: rtc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ cgu: x1000-cgu@10000000 {
+ compatible = "ingenic,x1000-cgu", "simple-mfd";
+ reg = <0x10000000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10000000 0x100>;
+
+ #clock-cells = <1>;
+
+ clocks = <&exclk>, <&rtclk>;
+ clock-names = "ext", "rtc";
+
+ otg_phy: usb-phy@3c {
+ compatible = "ingenic,x1000-phy";
+ reg = <0x3c 0x10>;
+
+ clocks = <&cgu X1000_CLK_OTGPHY>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ rng: rng@d8 {
+ compatible = "ingenic,x1000-rng";
+ reg = <0xd8 0x8>;
+
+ status = "disabled";
+ };
+
+ mac_phy_ctrl: mac-phy-ctrl@e8 {
+ compatible = "syscon";
+ reg = <0xe8 0x4>;
+ };
+ };
+
+ ost: timer@12000000 {
+ compatible = "ingenic,x1000-ost";
+ reg = <0x12000000 0x3c>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu X1000_CLK_OST>;
+ clock-names = "ost";
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <3>;
+ };
+
+ tcu: timer@10002000 {
+ compatible = "ingenic,x1000-tcu", "simple-mfd";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu X1000_CLK_RTCLK>,
+ <&cgu X1000_CLK_EXCLK>,
+ <&cgu X1000_CLK_PCLK>,
+ <&cgu X1000_CLK_TCU>;
+ clock-names = "rtc", "ext", "pclk", "tcu";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27 26 25>;
+
+ wdt: watchdog@0 {
+ compatible = "ingenic,x1000-watchdog", "ingenic,jz4780-watchdog";
+ reg = <0x0 0x10>;
+
+ clocks = <&tcu TCU_CLK_WDT>;
+ clock-names = "wdt";
+ };
+
+ pwm: pwm@40 {
+ compatible = "ingenic,x1000-pwm";
+ reg = <0x40 0x50>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+ <&tcu TCU_CLK_TIMER4>;
+ clock-names = "timer0", "timer1", "timer2", "timer3", "timer4";
+ };
+ };
+
+ rtc: rtc@10003000 {
+ compatible = "ingenic,x1000-rtc", "ingenic,jz4780-rtc";
+ reg = <0x10003000 0x4c>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <32>;
+
+ clocks = <&cgu X1000_CLK_RTCLK>;
+ clock-names = "rtc";
+ };
+
+ pinctrl: pin-controller@10010000 {
+ compatible = "ingenic,x1000-pinctrl";
+ reg = <0x10010000 0x800>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpa: gpio@0 {
+ compatible = "ingenic,x1000-gpio";
+ reg = <0>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <17>;
+ };
+
+ gpb: gpio@1 {
+ compatible = "ingenic,x1000-gpio";
+ reg = <1>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 32 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <16>;
+ };
+
+ gpc: gpio@2 {
+ compatible = "ingenic,x1000-gpio";
+ reg = <2>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 64 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <15>;
+ };
+
+ gpd: gpio@3 {
+ compatible = "ingenic,x1000-gpio";
+ reg = <3>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 96 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <14>;
+ };
+ };
+
+ uart0: serial@10030000 {
+ compatible = "ingenic,x1000-uart";
+ reg = <0x10030000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <51>;
+
+ clocks = <&exclk>, <&cgu X1000_CLK_UART0>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ uart1: serial@10031000 {
+ compatible = "ingenic,x1000-uart";
+ reg = <0x10031000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <50>;
+
+ clocks = <&exclk>, <&cgu X1000_CLK_UART1>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ uart2: serial@10032000 {
+ compatible = "ingenic,x1000-uart";
+ reg = <0x10032000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <49>;
+
+ clocks = <&exclk>, <&cgu X1000_CLK_UART2>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ ssi: spi@10043000 {
+ compatible = "ingenic,x1000-spi";
+ reg = <0x10043000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <8>;
+
+ clocks = <&cgu X1000_CLK_SSI>;
+ clock-names = "spi";
+
+ dmas = <&pdma X1000_DMA_SSI0_RX 0xffffffff>,
+ <&pdma X1000_DMA_SSI0_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
+ i2c0: i2c-controller@10050000 {
+ compatible = "ingenic,x1000-i2c";
+ reg = <0x10050000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <60>;
+
+ clocks = <&cgu X1000_CLK_I2C0>;
+
+ status = "disabled";
+ };
+
+ i2c1: i2c-controller@10051000 {
+ compatible = "ingenic,x1000-i2c";
+ reg = <0x10051000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <59>;
+
+ clocks = <&cgu X1000_CLK_I2C1>;
+
+ status = "disabled";
+ };
+
+ i2c2: i2c-controller@10052000 {
+ compatible = "ingenic,x1000-i2c";
+ reg = <0x10052000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <58>;
+
+ clocks = <&cgu X1000_CLK_I2C2>;
+
+ status = "disabled";
+ };
+
+ pdma: dma-controller@13420000 {
+ compatible = "ingenic,x1000-dma";
+ reg = <0x13420000 0x400>, <0x13421000 0x40>;
+
+ #dma-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <10>;
+
+ clocks = <&cgu X1000_CLK_PDMA>;
+ };
+
+ msc0: mmc@13450000 {
+ compatible = "ingenic,x1000-mmc";
+ reg = <0x13450000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <37>;
+
+ clocks = <&cgu X1000_CLK_MSC0>;
+ clock-names = "mmc";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ dmas = <&pdma X1000_DMA_MSC0_RX 0xffffffff>,
+ <&pdma X1000_DMA_MSC0_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
+ msc1: mmc@13460000 {
+ compatible = "ingenic,x1000-mmc";
+ reg = <0x13460000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <36>;
+
+ clocks = <&cgu X1000_CLK_MSC1>;
+ clock-names = "mmc";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ dmas = <&pdma X1000_DMA_MSC1_RX 0xffffffff>,
+ <&pdma X1000_DMA_MSC1_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
+ mac: ethernet@134b0000 {
+ compatible = "ingenic,x1000-mac", "snps,dwmac";
+ reg = <0x134b0000 0x2000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <55>;
+ interrupt-names = "macirq";
+
+ clocks = <&cgu X1000_CLK_MAC>;
+ clock-names = "stmmaceth";
+
+ mode-reg = <&mac_phy_ctrl>;
+
+ status = "disabled";
+
+ mdio: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ otg: usb@13500000 {
+ compatible = "ingenic,x1000-otg";
+ reg = <0x13500000 0x40000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <21>;
+
+ clocks = <&cgu X1000_CLK_OTG>;
+ clock-names = "otg";
+
+ phys = <&otg_phy>;
+ phy-names = "usb2-phy";
+
+ g-rx-fifo-size = <768>;
+ g-np-tx-fifo-size = <256>;
+ g-tx-fifo-size = <256 256 256 256 256 256 256 512>;
+
+ status = "disabled";
+ };
+
+ aic: audio-controller@10020000 {
+ compatible = "ingenic,x1000-i2s";
+ reg = <0x10020000 0x38>;
+
+ #sound-dai-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <1>;
+
+ clocks = <&cgu X1000_CLK_AIC>,
+ <&cgu X1000_CLK_I2S>;
+ clock-names = "aic", "i2s";
+
+ dmas = <&pdma X1000_DMA_I2S0_RX 0xffffffff>,
+ <&pdma X1000_DMA_I2S0_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+ };
+};
diff --git a/src/mips/ingenic/x1830.dtsi b/src/mips/ingenic/x1830.dtsi
new file mode 100644
index 0000000..65a5da7
--- /dev/null
+++ b/src/mips/ingenic/x1830.dtsi
@@ -0,0 +1,430 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/clock/ingenic,x1830-cgu.h>
+#include <dt-bindings/dma/x1830-dma.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ingenic,x1830";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-fpu2.0-mxu2.0";
+ reg = <0>;
+
+ clocks = <&cgu X1830_CLK_CPU>;
+ clock-names = "cpu";
+ };
+ };
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ intc: interrupt-controller@10001000 {
+ compatible = "ingenic,x1830-intc", "ingenic,jz4780-intc";
+ reg = <0x10001000 0x50>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ exclk: ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ rtclk: rtc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ cgu: x1830-cgu@10000000 {
+ compatible = "ingenic,x1830-cgu", "simple-mfd";
+ reg = <0x10000000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10000000 0x100>;
+
+ #clock-cells = <1>;
+
+ clocks = <&exclk>, <&rtclk>;
+ clock-names = "ext", "rtc";
+
+ otg_phy: usb-phy@3c {
+ compatible = "ingenic,x1830-phy";
+ reg = <0x3c 0x10>;
+
+ clocks = <&cgu X1830_CLK_OTGPHY>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ mac_phy_ctrl: mac-phy-ctrl@e8 {
+ compatible = "syscon";
+ reg = <0xe8 0x4>;
+ };
+ };
+
+ ost: timer@12000000 {
+ compatible = "ingenic,x1830-ost", "ingenic,x1000-ost";
+ reg = <0x12000000 0x3c>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu X1830_CLK_OST>;
+ clock-names = "ost";
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <4>;
+ };
+
+ tcu: timer@10002000 {
+ compatible = "ingenic,x1830-tcu", "ingenic,x1000-tcu", "simple-mfd";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu X1830_CLK_RTCLK>,
+ <&cgu X1830_CLK_EXCLK>,
+ <&cgu X1830_CLK_PCLK>,
+ <&cgu X1830_CLK_TCU>;
+ clock-names = "rtc", "ext", "pclk", "tcu";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27 26 25>;
+
+ wdt: watchdog@0 {
+ compatible = "ingenic,x1830-watchdog", "ingenic,jz4780-watchdog";
+ reg = <0x0 0x10>;
+
+ clocks = <&tcu TCU_CLK_WDT>;
+ clock-names = "wdt";
+ };
+
+ pwm: pwm@40 {
+ compatible = "ingenic,x1830-pwm", "ingenic,jz4740-pwm";
+ reg = <0x40 0x80>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+ <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
+ <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
+ clock-names = "timer0", "timer1", "timer2", "timer3",
+ "timer4", "timer5", "timer6", "timer7";
+ };
+ };
+
+ rtc: rtc@10003000 {
+ compatible = "ingenic,x1830-rtc", "ingenic,jz4780-rtc";
+ reg = <0x10003000 0x4c>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <32>;
+
+ clocks = <&cgu X1830_CLK_RTCLK>;
+ clock-names = "rtc";
+ };
+
+ pinctrl: pin-controller@10010000 {
+ compatible = "ingenic,x1830-pinctrl";
+ reg = <0x10010000 0x800>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpa: gpio@0 {
+ compatible = "ingenic,x1830-gpio";
+ reg = <0>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <17>;
+ };
+
+ gpb: gpio@1 {
+ compatible = "ingenic,x1830-gpio";
+ reg = <1>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 32 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <16>;
+ };
+
+ gpc: gpio@2 {
+ compatible = "ingenic,x1830-gpio";
+ reg = <2>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 64 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <15>;
+ };
+
+ gpd: gpio@3 {
+ compatible = "ingenic,x1830-gpio";
+ reg = <3>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 96 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <14>;
+ };
+ };
+
+ uart0: serial@10030000 {
+ compatible = "ingenic,x1830-uart", "ingenic,x1000-uart";
+ reg = <0x10030000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <51>;
+
+ clocks = <&exclk>, <&cgu X1830_CLK_UART0>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ uart1: serial@10031000 {
+ compatible = "ingenic,x1830-uart", "ingenic,x1000-uart";
+ reg = <0x10031000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <50>;
+
+ clocks = <&exclk>, <&cgu X1830_CLK_UART1>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ ssi0: spi@10043000 {
+ compatible = "ingenic,x1830-spi", "ingenic,x1000-spi";
+ reg = <0x10043000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <9>;
+
+ clocks = <&cgu X1830_CLK_SSI0>;
+ clock-names = "spi";
+
+ dmas = <&pdma X1830_DMA_SSI0_RX 0xffffffff>,
+ <&pdma X1830_DMA_SSI0_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
+ ssi1: spi@10044000 {
+ compatible = "ingenic,x1830-spi", "ingenic,x1000-spi";
+ reg = <0x10044000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <8>;
+
+ clocks = <&cgu X1830_CLK_SSI1>;
+ clock-names = "spi";
+
+ dmas = <&pdma X1830_DMA_SSI1_RX 0xffffffff>,
+ <&pdma X1830_DMA_SSI1_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
+ i2c0: i2c-controller@10050000 {
+ compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c";
+ reg = <0x10050000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <60>;
+
+ clocks = <&cgu X1830_CLK_SMB0>;
+
+ status = "disabled";
+ };
+
+ i2c1: i2c-controller@10051000 {
+ compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c";
+ reg = <0x10051000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <59>;
+
+ clocks = <&cgu X1830_CLK_SMB1>;
+
+ status = "disabled";
+ };
+
+ i2c2: i2c-controller@10052000 {
+ compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c";
+ reg = <0x10052000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <58>;
+
+ clocks = <&cgu X1830_CLK_SMB2>;
+
+ status = "disabled";
+ };
+
+ dtrng: trng@10072000 {
+ compatible = "ingenic,x1830-dtrng";
+ reg = <0x10072000 0xc>;
+
+ clocks = <&cgu X1830_CLK_DTRNG>;
+
+ status = "disabled";
+ };
+
+ pdma: dma-controller@13420000 {
+ compatible = "ingenic,x1830-dma";
+ reg = <0x13420000 0x400>, <0x13421000 0x40>;
+
+ #dma-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <10>;
+
+ clocks = <&cgu X1830_CLK_PDMA>;
+ };
+
+ msc0: mmc@13450000 {
+ compatible = "ingenic,x1830-mmc", "ingenic,x1000-mmc";
+ reg = <0x13450000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <37>;
+
+ clocks = <&cgu X1830_CLK_MSC0>;
+ clock-names = "mmc";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ dmas = <&pdma X1830_DMA_MSC0_RX 0xffffffff>,
+ <&pdma X1830_DMA_MSC0_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
+ msc1: mmc@13460000 {
+ compatible = "ingenic,x1830-mmc", "ingenic,x1000-mmc";
+ reg = <0x13460000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <36>;
+
+ clocks = <&cgu X1830_CLK_MSC1>;
+ clock-names = "mmc";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ dmas = <&pdma X1830_DMA_MSC1_RX 0xffffffff>,
+ <&pdma X1830_DMA_MSC1_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
+ mac: ethernet@134b0000 {
+ compatible = "ingenic,x1830-mac", "snps,dwmac";
+ reg = <0x134b0000 0x2000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <55>;
+ interrupt-names = "macirq";
+
+ clocks = <&cgu X1830_CLK_MAC>;
+ clock-names = "stmmaceth";
+
+ mode-reg = <&mac_phy_ctrl>;
+
+ status = "disabled";
+
+ mdio: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ otg: usb@13500000 {
+ compatible = "ingenic,x1830-otg";
+ reg = <0x13500000 0x40000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <21>;
+
+ clocks = <&cgu X1830_CLK_OTG>;
+ clock-names = "otg";
+
+ phys = <&otg_phy>;
+ phy-names = "usb2-phy";
+
+ g-rx-fifo-size = <768>;
+ g-np-tx-fifo-size = <256>;
+ g-tx-fifo-size = <256 256 256 256 256 256 256 512>;
+
+ status = "disabled";
+ };
+};