Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/arm64/ti/k3-am62-verdin-dev.dtsi b/src/arm64/ti/k3-am62-verdin-dev.dtsi
new file mode 100644
index 0000000..6701cb8
--- /dev/null
+++ b/src/arm64/ti/k3-am62-verdin-dev.dtsi
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin AM62 SoM on Development carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/verdin-development-board-kit
+ */
+
+/ {
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,bitclock-master = <&codec_dai>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&codec_dai>;
+ simple-audio-card,name = "verdin-nau8822";
+ simple-audio-card,routing =
+ "Headphones", "LHP",
+ "Headphones", "RHP",
+ "Speaker", "LSPK",
+ "Speaker", "RSPK",
+ "Line Out", "AUXOUT1",
+ "Line Out", "AUXOUT2",
+ "LAUX", "Line In",
+ "RAUX", "Line In",
+ "LMICP", "Mic In",
+ "RMICP", "Mic In";
+ simple-audio-card,widgets =
+ "Headphones", "Headphones",
+ "Line Out", "Line Out",
+ "Speaker", "Speaker",
+ "Microphone", "Mic In",
+ "Line", "Line In";
+
+ codec_dai: simple-audio-card,codec {
+ clocks = <&audio_refclk1>;
+ sound-dai = <&nau8822_1a>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcasp0>;
+ };
+ };
+};
+
+/* Verdin ETHs */
+&cpsw3g {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1>, <&pinctrl_rgmii2>;
+ status = "okay";
+};
+
+/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+&cpsw3g_mdio {
+ status = "okay";
+
+ cpsw3g_phy1: ethernet-phy@7 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <7>;
+ interrupt-parent = <&main_gpio0>;
+ interrupts = <38 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eth2_rgmii_int>;
+ micrel,led-mode = <0>;
+ };
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&cpsw_port1 {
+ status = "okay";
+};
+
+/* Verdin ETH_2_RGMII */
+&cpsw_port2 {
+ phy-handle = <&cpsw3g_phy1>;
+ phy-mode = "rgmii-rxid";
+ status = "okay";
+};
+
+/* Verdin PWM_1, PWM_2 */
+&epwm0 {
+ status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&epwm1 {
+ status = "okay";
+};
+
+&main_gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ctrl_sleep_moci>,
+ <&pinctrl_gpio_5>,
+ <&pinctrl_gpio_6>,
+ <&pinctrl_gpio_7>,
+ <&pinctrl_gpio_8>;
+};
+
+/* Verdin I2C_1 */
+&main_i2c1 {
+ status = "okay";
+
+ /* Audio Codec */
+ nau8822_1a: audio-codec@1a {
+ compatible = "nuvoton,nau8822";
+ reg = <0x1a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s1_mclk>;
+ #sound-dai-cells = <0>;
+ };
+
+ /* IO Expander */
+ gpio_expander_21: gpio@21 {
+ compatible = "nxp,pcal6416";
+ reg = <0x21>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ /* Current measurement into module VCC */
+ hwmon@40 {
+ compatible = "ti,ina219";
+ reg = <0x40>;
+ shunt-resistor = <10000>;
+ };
+
+ /* Temperature sensor */
+ sensor@4f {
+ compatible = "ti,tmp75c";
+ reg = <0x4f>;
+ };
+
+ /* EEPROM */
+ eeprom@57 {
+ compatible = "st,24c02", "atmel,24c02";
+ reg = <0x57>;
+ pagesize = <16>;
+ };
+};
+
+/* Verdin I2C_2_DSI */
+&main_i2c2 {
+ status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&main_i2c3 {
+ status = "okay";
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+ status = "okay";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+ status = "okay";
+};
+
+/* Verdin UART_3 */
+&main_uart0 {
+ status = "okay";
+};
+
+/* Verdin UART_1, connector X50 through RS485 transceiver. */
+&main_uart1 {
+ linux,rs485-enabled-at-boot-time;
+ rs485-rx-during-tx;
+ status = "okay";
+};
+
+/* Verdin I2S_1 */
+&mcasp0 {
+ status = "okay";
+};
+
+&mcu_gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_1>,
+ <&pinctrl_gpio_2>,
+ <&pinctrl_gpio_3>,
+ <&pinctrl_gpio_4>;
+};
+
+/* Verdin I2C_3_HDMI */
+&mcu_i2c0 {
+ status = "okay";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+ status = "okay";
+};
+
+/* Verdin UART_4 */
+&mcu_uart0 {
+ status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&ospi0 {
+ status = "okay";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+ ti,driver-strength-ohm = <33>;
+ status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+/* Verdin CTRL_WAKE1_MICO# */
+&verdin_gpio_keys {
+ status = "okay";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+ /* FIXME: WKUP UART0 is used by DM firmware */
+ status = "reserved";
+};