diff --git a/src/arm64/sprd/sc2731.dtsi b/src/arm64/sprd/sc2731.dtsi
new file mode 100644
index 0000000..e15409f
--- /dev/null
+++ b/src/arm64/sprd/sc2731.dtsi
@@ -0,0 +1,258 @@
+/*
+ * Spreadtrum SC2731 PMIC dts file
+ *
+ * Copyright (C) 2018, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+&adi_bus {
+	sc2731_pmic: pmic@0 {
+		compatible = "sprd,sc2731";
+		reg = <0>;
+		spi-max-frequency = <26000000>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		charger@0 {
+			compatible = "sprd,sc2731-charger";
+			reg = <0x0>;
+			monitored-battery = <&bat>;
+		};
+
+		led-controller@200 {
+			compatible = "sprd,sc2731-bltc";
+			reg = <0x200>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				label = "red";
+				reg = <0x0>;
+			};
+
+			led@1 {
+				label = "green";
+				reg = <0x1>;
+			};
+
+			led@2 {
+				label = "blue";
+				reg = <0x2>;
+			};
+		};
+
+		rtc@280 {
+			compatible = "sprd,sc2731-rtc";
+			reg = <0x280>;
+			interrupt-parent = <&sc2731_pmic>;
+			interrupts = <2>;
+		};
+
+		pmic_eic: gpio@300 {
+			compatible = "sprd,sc2731-eic";
+			reg = <0x300>;
+			interrupt-parent = <&sc2731_pmic>;
+			interrupts = <5>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		efuse@380 {
+			compatible = "sprd,sc2731-efuse";
+			reg = <0x380>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			hwlocks = <&hwlock 12>;
+
+			fgu_calib: calib@6 {
+				reg = <0x6 0x2>;
+				bits = <0 9>;
+			};
+
+			adc_big_scale: calib@24 {
+				reg = <0x24 0x2>;
+			};
+
+			adc_small_scale: calib@26 {
+				reg = <0x26 0x2>;
+			};
+		};
+
+		pmic_adc: adc@480 {
+			compatible = "sprd,sc2731-adc";
+			reg = <0x480>;
+			interrupt-parent = <&sc2731_pmic>;
+			interrupts = <0>;
+			#io-channel-cells = <1>;
+			hwlocks = <&hwlock 4>;
+			nvmem-cell-names = "big_scale_calib", "small_scale_calib";
+			nvmem-cells = <&adc_big_scale>, <&adc_small_scale>;
+		};
+
+		fgu@a00 {
+			compatible = "sprd,sc2731-fgu";
+			reg = <0xa00>;
+			bat-detect-gpio = <&pmic_eic 9 GPIO_ACTIVE_HIGH>;
+			io-channels = <&pmic_adc 3>, <&pmic_adc 6>;
+			io-channel-names = "bat-temp", "charge-vol";
+			monitored-battery = <&bat>;
+			nvmem-cell-names = "fgu_calib";
+			nvmem-cells = <&fgu_calib>;
+			interrupt-parent = <&sc2731_pmic>;
+			interrupts = <4>;
+		};
+
+		vibrator@ec8 {
+			compatible = "sprd,sc2731-vibrator";
+			reg = <0xec8>;
+		};
+
+		regulators {
+			compatible = "sprd,sc2731-regulator";
+
+			vddarm0: BUCK_CPU0 {
+				regulator-name = "vddarm0";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1996875>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+
+			vddarm1: BUCK_CPU1 {
+				regulator-name = "vddarm1";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1996875>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+
+			dcdcrf: BUCK_RF {
+				regulator-name = "dcdcrf";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2196875>;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-always-on;
+			};
+
+			vddcama0: LDO_CAMA0 {
+				regulator-name = "vddcama0";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+			};
+
+			vddcama1: LDO_CAMA1 {
+				regulator-name = "vddcama1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddcammot: LDO_CAMMOT {
+				regulator-name = "vddcammot";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddvldo: LDO_VLDO {
+				regulator-name = "vddvldo";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddemmccore: LDO_EMMCCORE {
+				regulator-name = "vddemmccore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+				regulator-boot-on;
+			};
+
+			vddsdcore: LDO_SDCORE {
+				regulator-name = "vddsdcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddsdio: LDO_SDIO {
+				regulator-name = "vddsdio";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddwifipa: LDO_WIFIPA {
+				regulator-name = "vddwifipa";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddusb33: LDO_USB33 {
+				regulator-name = "vddusb33";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddcamd0: LDO_CAMD0 {
+				regulator-name = "vddcamd0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1793750>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddcamd1: LDO_CAMD1 {
+				regulator-name = "vddcamd1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1793750>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddcon: LDO_CON {
+				regulator-name = "vddcon";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1793750>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddcamio: LDO_CAMIO {
+				regulator-name = "vddcamio";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1793750>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddsram: LDO_SRAM {
+				regulator-name = "vddsram";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1793750>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
diff --git a/src/arm64/sprd/sc9836-openphone.dts b/src/arm64/sprd/sc9836-openphone.dts
new file mode 100644
index 0000000..e5657c3
--- /dev/null
+++ b/src/arm64/sprd/sc9836-openphone.dts
@@ -0,0 +1,49 @@
+/*
+ * Spreadtrum SC9836 openphone board DTS file
+ *
+ * Copyright (C) 2014, Spreadtrum Communications Inc.
+ *
+ * This file is licensed under a dual GPLv2 or X11 license.
+ */
+
+/dts-v1/;
+
+#include "sc9836.dtsi"
+
+/ {
+	model = "Spreadtrum SC9836 Openphone Board";
+
+	compatible = "sprd,sc9836-openphone", "sprd,sc9836";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x20000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/src/arm64/sprd/sc9836.dtsi b/src/arm64/sprd/sc9836.dtsi
new file mode 100644
index 0000000..8bb8a70
--- /dev/null
+++ b/src/arm64/sprd/sc9836.dtsi
@@ -0,0 +1,224 @@
+/*
+ * Spreadtrum SC9836 SoC DTS file
+ *
+ * Copyright (C) 2014, Spreadtrum Communications Inc.
+ *
+ * This file is licensed under a dual GPLv2 or X11 license.
+ */
+
+#include "sharkl64.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "sprd,sc9836";
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	etf@10003000 {
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0 0x10003000 0 0x1000>;
+		clocks = <&clk26mhz>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				etf_in: endpoint {
+					remote-endpoint = <&funnel_out_port0>;
+				};
+			};
+		};
+	};
+
+	funnel@10001000 {
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0x10001000 0 0x1000>;
+		clocks = <&clk26mhz>;
+		clock-names = "apb_pclk";
+
+		out-ports {
+			port {
+				funnel_out_port0: endpoint {
+					remote-endpoint = <&etf_in>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				funnel_in_port0: endpoint {
+					remote-endpoint = <&etm0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				funnel_in_port1: endpoint {
+					remote-endpoint = <&etm1_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				funnel_in_port2: endpoint {
+					remote-endpoint = <&etm2_out>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				funnel_in_port3: endpoint {
+					remote-endpoint = <&etm3_out>;
+				};
+			};
+
+			port@4 {
+				reg = <4>;
+				funnel_in_port4: endpoint {
+					remote-endpoint = <&stm_out>;
+				};
+			};
+			/* Other input ports aren't connected to anyone */
+		};
+	};
+
+	etm@10440000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x10440000 0 0x1000>;
+
+		cpu = <&cpu0>;
+		clocks = <&clk26mhz>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm0_out: endpoint {
+					remote-endpoint = <&funnel_in_port0>;
+				};
+			};
+		};
+	};
+
+	etm@10540000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x10540000 0 0x1000>;
+
+		cpu = <&cpu1>;
+		clocks = <&clk26mhz>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm1_out: endpoint {
+					remote-endpoint = <&funnel_in_port1>;
+				};
+			};
+		};
+	};
+
+	etm@10640000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x10640000 0 0x1000>;
+
+		cpu = <&cpu2>;
+		clocks = <&clk26mhz>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm2_out: endpoint {
+					remote-endpoint = <&funnel_in_port2>;
+				};
+			};
+		};
+	};
+
+	etm@10740000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x10740000 0 0x1000>;
+
+		cpu = <&cpu3>;
+		clocks = <&clk26mhz>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm3_out: endpoint {
+					remote-endpoint = <&funnel_in_port3>;
+				};
+			};
+		};
+	};
+
+	stm@10006000 {
+		compatible = "arm,coresight-stm", "arm,primecell";
+		reg = <0 0x10006000 0 0x1000>,
+		      <0 0x01000000 0 0x180000>;
+		reg-names = "stm-base", "stm-stimulus-base";
+		clocks = <&clk26mhz>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				stm_out: endpoint {
+					remote-endpoint = <&funnel_in_port4>;
+				};
+			};
+		};
+	};
+
+	gic: interrupt-controller@12001000 {
+		compatible = "arm,gic-400";
+		reg = <0 0x12001000 0 0x1000>,
+		      <0 0x12002000 0 0x2000>,
+		      <0 0x12004000 0 0x2000>,
+		      <0 0x12006000 0 0x2000>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_on = <0xc4000003>;
+		cpu_off = <0x84000002>;
+		cpu_suspend = <0xc4000001>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/src/arm64/sprd/sc9860.dtsi b/src/arm64/sprd/sc9860.dtsi
new file mode 100644
index 0000000..e27eb3e
--- /dev/null
+++ b/src/arm64/sprd/sc9860.dtsi
@@ -0,0 +1,716 @@
+/*
+ * Spreadtrum SC9860 SoC
+ *
+ * Copyright (C) 2016, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "whale2.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+				core1 {
+					cpu = <&CPU5>;
+				};
+				core2 {
+					cpu = <&CPU6>;
+				};
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		CPU0: cpu@530000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x530000>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU1: cpu@530001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x530001>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU2: cpu@530002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x530002>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU3: cpu@530003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x530003>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU4: cpu@530100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x530100>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU5: cpu@530101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x530101>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU6: cpu@530102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x530102>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU7: cpu@530103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x530103>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+	};
+
+	idle-states{
+		entry-method = "psci";
+
+		CORE_PD: core_pd {
+			compatible = "arm,idle-state";
+			entry-latency-us = <1000>;
+			exit-latency-us = <700>;
+			min-residency-us = <2500>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x00010002>;
+		};
+
+		CLUSTER_PD: cluster_pd {
+			compatible = "arm,idle-state";
+			entry-latency-us = <1000>;
+			exit-latency-us = <1000>;
+			min-residency-us = <3000>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x01010003>;
+		};
+	};
+
+	gic: interrupt-controller@12001000 {
+		compatible = "arm,gic-400";
+		reg = <0 0x12001000 0 0x1000>,
+		      <0 0x12002000 0 0x2000>,
+		      <0 0x12004000 0 0x2000>,
+		      <0 0x12006000 0 0x2000>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8)
+					| IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8)
+					 | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8)
+					 | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8)
+					 | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8)
+					 | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CPU0>,
+				     <&CPU1>,
+				     <&CPU2>,
+				     <&CPU3>,
+				     <&CPU4>,
+				     <&CPU5>,
+				     <&CPU6>,
+				     <&CPU7>;
+	};
+
+	soc {
+		pmu_gate: pmu-gate {
+			compatible = "sprd,sc9860-pmu-gate";
+			sprd,syscon = <&pmu_regs>; /* 0x402b0000 */
+			clocks = <&ext_26m>;
+			#clock-cells = <1>;
+		};
+
+		pll: pll {
+			compatible = "sprd,sc9860-pll";
+			sprd,syscon = <&ana_regs>; /* 0x40400000 */
+			clocks = <&pmu_gate 0>;
+			#clock-cells = <1>;
+		};
+
+		ap_clk: clock-controller@20000000 {
+			compatible = "sprd,sc9860-ap-clk";
+			reg = <0 0x20000000 0 0x400>;
+			clocks = <&ext_26m>, <&pll 0>,
+				 <&pmu_gate 0>;
+			#clock-cells = <1>;
+		};
+
+		aon_prediv: aon-prediv {
+			compatible = "sprd,sc9860-aon-prediv";
+			reg = <0 0x402d0000 0 0x400>;
+			clocks = <&ext_26m>, <&pll 0>,
+				 <&pmu_gate 0>;
+			#clock-cells = <1>;
+		};
+
+		apahb_gate: apahb-gate {
+			compatible = "sprd,sc9860-apahb-gate";
+			sprd,syscon = <&ap_ahb_regs>; /* 0x20210000 */
+			clocks = <&aon_prediv 0>;
+			#clock-cells = <1>;
+		};
+
+		aon_gate: aon-gate {
+			compatible = "sprd,sc9860-aon-gate";
+			sprd,syscon = <&aon_regs>; /* 0x402e0000 */
+			clocks = <&aon_prediv 0>;
+			#clock-cells = <1>;
+		};
+
+		aonsecure_clk: clock-controller@40880000 {
+			compatible = "sprd,sc9860-aonsecure-clk";
+			reg = <0 0x40880000 0 0x400>;
+			clocks = <&ext_26m>, <&pll 0>;
+			#clock-cells = <1>;
+		};
+
+		agcp_gate: agcp-gate {
+			compatible = "sprd,sc9860-agcp-gate";
+			sprd,syscon = <&agcp_regs>; /* 0x415e0000 */
+			clocks = <&aon_prediv 0>;
+			#clock-cells = <1>;
+		};
+
+		gpu_clk: clock-controller@60200000 {
+			compatible = "sprd,sc9860-gpu-clk";
+			reg = <0 0x60200000 0 0x400>;
+			clocks = <&pll 0>;
+			#clock-cells = <1>;
+		};
+
+		vsp_clk: clock-controller@61000000 {
+			compatible = "sprd,sc9860-vsp-clk";
+			reg = <0 0x61000000 0 0x400>;
+			clocks = <&ext_26m>, <&pll 0>;
+			#clock-cells = <1>;
+		};
+
+		vsp_gate: vsp-gate {
+			compatible = "sprd,sc9860-vsp-gate";
+			sprd,syscon = <&vsp_regs>; /* 0x61100000 */
+			clocks = <&vsp_clk 0>;
+			#clock-cells = <1>;
+		};
+
+		cam_clk: clock-controller@62000000 {
+			compatible = "sprd,sc9860-cam-clk";
+			reg = <0 0x62000000 0 0x4000>;
+			clocks = <&ext_26m>, <&pll 0>;
+			#clock-cells = <1>;
+		};
+
+		cam_gate: cam-gate {
+			compatible = "sprd,sc9860-cam-gate";
+			sprd,syscon = <&cam_regs>; /* 0x62100000 */
+			clocks = <&cam_clk 0>;
+			#clock-cells = <1>;
+		};
+
+		disp_clk: clock-controller@63000000 {
+			compatible = "sprd,sc9860-disp-clk";
+			reg = <0 0x63000000 0 0x400>;
+			clocks = <&ext_26m>, <&pll 0>;
+			#clock-cells = <1>;
+		};
+
+		disp_gate: disp-gate {
+			compatible = "sprd,sc9860-disp-gate";
+			sprd,syscon = <&disp_regs>; /* 0x63100000 */
+			clocks = <&disp_clk 0>;
+			#clock-cells = <1>;
+		};
+
+		apapb_gate: apapb-gate {
+			compatible = "sprd,sc9860-apapb-gate";
+			sprd,syscon = <&ap_apb_regs>; /* 0x70b00000 */
+			clocks = <&ap_clk 0>;
+			#clock-cells = <1>;
+		};
+
+		funnel@10001000 { /* SoC Funnel */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x10001000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+			out-ports {
+				port {
+					soc_funnel_out_port: endpoint {
+						remote-endpoint = <&etb_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					soc_funnel_in_port0: endpoint {
+						remote-endpoint =
+						<&main_funnel_out_port>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					soc_funnel_in_port1: endpoint {
+						remote-endpoint =
+							<&stm_out_port>;
+					};
+				};
+			};
+		};
+
+		etb@10003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x10003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+			out-ports {
+				port {
+					etb_in: endpoint {
+						remote-endpoint =
+							<&soc_funnel_out_port>;
+					};
+				};
+			};
+		};
+
+		stm@10006000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0 0x10006000 0 0x1000>,
+			      <0 0x01000000 0 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+			out-ports {
+				port {
+					stm_out_port: endpoint {
+						remote-endpoint =
+							<&soc_funnel_in_port1>;
+					};
+				};
+			};
+		};
+
+		funnel@11001000 { /* Cluster0 Funnel */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x11001000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+			out-ports {
+				port {
+					cluster0_funnel_out_port: endpoint {
+						remote-endpoint =
+							<&cluster0_etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					cluster0_funnel_in_port0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					cluster0_funnel_in_port1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					cluster0_funnel_in_port2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					cluster0_funnel_in_port3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+			};
+		};
+
+		funnel@11002000 { /* Cluster1 Funnel */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x11002000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+			out-ports {
+				port {
+					cluster1_funnel_out_port: endpoint {
+						remote-endpoint =
+							<&cluster1_etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					cluster1_funnel_in_port0: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					cluster1_funnel_in_port1: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					cluster1_funnel_in_port2: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					cluster1_funnel_in_port3: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		etf@11003000 { /*  ETF on Cluster0 */
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x11003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					cluster0_etf_out: endpoint {
+						remote-endpoint =
+						<&main_funnel_in_port0>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					cluster0_etf_in: endpoint {
+						remote-endpoint =
+						<&cluster0_funnel_out_port>;
+					};
+				};
+			};
+		};
+
+		etf@11004000 { /* ETF on Cluster1 */
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x11004000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					cluster1_etf_out: endpoint {
+						remote-endpoint =
+						<&main_funnel_in_port1>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					cluster1_etf_in: endpoint {
+						remote-endpoint =
+						<&cluster1_funnel_out_port>;
+					};
+				};
+			};
+		};
+
+		funnel@11005000 { /* Main Funnel */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x11005000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					main_funnel_out_port: endpoint {
+						remote-endpoint =
+							<&soc_funnel_in_port0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					main_funnel_in_port0: endpoint {
+						remote-endpoint =
+							<&cluster0_etf_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					main_funnel_in_port1: endpoint {
+						remote-endpoint =
+							<&cluster1_etf_out>;
+					};
+				};
+			};
+		};
+
+		etm@11440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11440000 0 0x1000>;
+			cpu = <&CPU0>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+							<&cluster0_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm@11540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11540000 0 0x1000>;
+			cpu = <&CPU1>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+							<&cluster0_funnel_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm@11640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11640000 0 0x1000>;
+			cpu = <&CPU2>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+							<&cluster0_funnel_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm@11740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11740000 0 0x1000>;
+			cpu = <&CPU3>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+							<&cluster0_funnel_in_port3>;
+					};
+				};
+			};
+		};
+
+		etm@11840000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11840000 0 0x1000>;
+			cpu = <&CPU4>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint =
+							<&cluster1_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm@11940000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11940000 0 0x1000>;
+			cpu = <&CPU5>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint =
+							<&cluster1_funnel_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm@11a40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11a40000 0 0x1000>;
+			cpu = <&CPU6>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint =
+							<&cluster1_funnel_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm@11b40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11b40000 0 0x1000>;
+			cpu = <&CPU7>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint =
+							<&cluster1_funnel_in_port3>;
+					};
+				};
+			};
+		};
+
+		gpio-keys {
+			compatible = "gpio-keys";
+
+			key-volumedown {
+				label = "Volume Down Key";
+				linux,code = <KEY_VOLUMEDOWN>;
+				gpios = <&eic_debounce 2 GPIO_ACTIVE_LOW>;
+				debounce-interval = <2>;
+				wakeup-source;
+			};
+
+			key-volumeup {
+				label = "Volume Up Key";
+				linux,code = <KEY_VOLUMEUP>;
+				gpios = <&pmic_eic 10 GPIO_ACTIVE_HIGH>;
+				debounce-interval = <2>;
+				wakeup-source;
+			};
+
+			key-power {
+				label = "Power Key";
+				linux,code = <KEY_POWER>;
+				gpios = <&pmic_eic 1 GPIO_ACTIVE_HIGH>;
+				debounce-interval = <2>;
+				wakeup-source;
+			};
+		};
+	};
+};
diff --git a/src/arm64/sprd/sc9863a.dtsi b/src/arm64/sprd/sc9863a.dtsi
new file mode 100644
index 0000000..22d81ac
--- /dev/null
+++ b/src/arm64/sprd/sc9863a.dtsi
@@ -0,0 +1,589 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc SC9863A SoC DTS file
+ *
+ * Copyright (C) 2019, Unisoc Inc.
+ */
+
+#include <dt-bindings/clock/sprd,sc9863a-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "sharkl3.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+				core4 {
+					cpu = <&CPU4>;
+				};
+				core5 {
+					cpu = <&CPU5>;
+				};
+				core6 {
+					cpu = <&CPU6>;
+				};
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+	};
+
+	idle-states {
+		entry-method = "psci";
+		CORE_PD: core-pd {
+			compatible = "arm,idle-state";
+			entry-latency-us = <4000>;
+			exit-latency-us = <4000>;
+			min-residency-us = <10000>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x00010000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		gic: interrupt-controller@14000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			redistributor-stride = <0x0 0x20000>;	/* 128KB stride */
+			#redistributor-regions = <1>;
+			interrupt-controller;
+			reg = <0x0 0x14000000 0 0x20000>,	/* GICD */
+			      <0x0 0x14040000 0 0x100000>;	/* GICR */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ap_clk: clock-controller@21500000 {
+			compatible = "sprd,sc9863a-ap-clk";
+			reg = <0 0x21500000 0 0x1000>;
+			clocks = <&ext_32k>, <&ext_26m>;
+			clock-names = "ext-32k", "ext-26m";
+			#clock-cells = <1>;
+		};
+
+		aon_clk: clock-controller@402d0000 {
+			compatible = "sprd,sc9863a-aon-clk";
+			reg = <0 0x402d0000 0 0x1000>;
+			clocks = <&ext_26m>, <&rco_100m>,
+				 <&ext_32k>, <&ext_4m>;
+			clock-names = "ext-26m", "rco-100m",
+				      "ext-32k", "ext-4m";
+			#clock-cells = <1>;
+		};
+
+		mm_clk: clock-controller@60900000 {
+			compatible = "sprd,sc9863a-mm-clk";
+			reg = <0 0x60900000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		funnel@10001000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x10001000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_soc_out_port: endpoint {
+						remote-endpoint = <&etb_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					funnel_soc_in_port: endpoint {
+						remote-endpoint =
+						<&funnel_ca55_out_port>;
+					};
+				};
+			};
+		};
+
+		etb@10003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x10003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etb_in: endpoint {
+						remote-endpoint =
+						<&funnel_soc_out_port>;
+					};
+				};
+			};
+		};
+
+		funnel@12001000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x12001000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_little_out_port: endpoint {
+						remote-endpoint =
+						<&etf_little_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_little_in_port0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_little_in_port1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel_little_in_port2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					funnel_little_in_port3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+			};
+		};
+
+		etf@12002000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x12002000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_little_out: endpoint {
+						remote-endpoint =
+						<&funnel_ca55_in_port0>;
+					};
+				};
+			};
+
+			in-port {
+				port {
+					etf_little_in: endpoint {
+						remote-endpoint =
+						<&funnel_little_out_port>;
+					};
+				};
+			};
+		};
+
+		etf@12003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x12003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_big_out: endpoint {
+						remote-endpoint =
+						<&funnel_ca55_in_port1>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					etf_big_in: endpoint {
+						remote-endpoint =
+						<&funnel_big_out_port>;
+					};
+				};
+			};
+		};
+
+		funnel@12004000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x12004000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_ca55_out_port: endpoint {
+						remote-endpoint =
+						<&funnel_soc_in_port>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_ca55_in_port0: endpoint {
+						remote-endpoint =
+						<&etf_little_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_ca55_in_port1: endpoint {
+						remote-endpoint =
+						<&etf_big_out>;
+					};
+				};
+			};
+		};
+
+		funnel@12005000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x12005000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_big_out_port: endpoint {
+						remote-endpoint =
+						<&etf_big_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_big_in_port0: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_big_in_port1: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel_big_in_port2: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					funnel_big_in_port3: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		etm@13040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13040000 0 0x1000>;
+			cpu = <&CPU0>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+						<&funnel_little_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm@13140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13140000 0 0x1000>;
+			cpu = <&CPU1>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+						<&funnel_little_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm@13240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13240000 0 0x1000>;
+			cpu = <&CPU2>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+						<&funnel_little_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm@13340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13340000 0 0x1000>;
+			cpu = <&CPU3>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+						<&funnel_little_in_port3>;
+					};
+				};
+			};
+		};
+
+		etm@13440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13440000 0 0x1000>;
+			cpu = <&CPU4>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint =
+						<&funnel_big_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm@13540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13540000 0 0x1000>;
+			cpu = <&CPU5>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint =
+						<&funnel_big_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm@13640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13640000 0 0x1000>;
+			cpu = <&CPU6>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint =
+						<&funnel_big_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm@13740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13740000 0 0x1000>;
+			cpu = <&CPU7>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint =
+						<&funnel_big_in_port3>;
+					};
+				};
+			};
+		};
+
+		ap-ahb {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			sdio0: sdio@20300000 {
+				compatible = "sprd,sdhci-r11";
+				reg = <0 0x20300000 0 0x1000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+
+				clock-names = "sdio", "enable";
+				clocks = <&aon_clk CLK_SDIO0_2X>,
+					 <&apahb_gate CLK_SDIO0_EB>;
+				assigned-clocks = <&aon_clk CLK_SDIO0_2X>;
+				assigned-clock-parents = <&rpll CLK_RPLL_390M>;
+
+				bus-width = <4>;
+				no-sdio;
+				no-mmc;
+			};
+
+			sdio3: sdio@20600000 {
+				compatible = "sprd,sdhci-r11";
+				reg = <0 0x20600000 0 0x1000>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+
+				clock-names = "sdio", "enable";
+				clocks = <&aon_clk CLK_EMMC_2X>,
+					 <&apahb_gate CLK_EMMC_EB>;
+				assigned-clocks = <&aon_clk CLK_EMMC_2X>;
+				assigned-clock-parents = <&rpll CLK_RPLL_390M>;
+
+				bus-width = <8>;
+				non-removable;
+				no-sdio;
+				no-sd;
+				cap-mmc-hw-reset;
+			};
+		};
+	};
+};
diff --git a/src/arm64/sprd/sharkl3.dtsi b/src/arm64/sprd/sharkl3.dtsi
new file mode 100644
index 0000000..206a4af
--- /dev/null
+++ b/src/arm64/sprd/sharkl3.dtsi
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc Sharkl3 platform DTS file
+ *
+ * Copyright (C) 2019, Unisoc Inc.
+ */
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ap_ahb_regs: syscon@20e00000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x20e00000 0 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x20e00000 0x4000>;
+
+			apahb_gate: apahb-gate {
+				compatible = "sprd,sc9863a-apahb-gate";
+				reg = <0x0 0x1020>;
+				#clock-cells = <1>;
+			};
+		};
+
+		pmu_regs: syscon@402b0000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x402b0000 0 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x402b0000 0x4000>;
+
+			pmu_gate: pmu-gate {
+				compatible = "sprd,sc9863a-pmu-gate";
+				reg = <0 0x1200>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		aon_apb_regs: syscon@402e0000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x402e0000 0 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x402e0000 0x4000>;
+
+			aonapb_gate: aonapb-gate {
+				compatible = "sprd,sc9863a-aonapb-gate";
+				reg = <0 0x1100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g2_regs: syscon@40353000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x40353000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x40353000 0x3000>;
+
+			pll: pll {
+				compatible = "sprd,sc9863a-pll";
+				reg = <0 0x100>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g4_regs: syscon@40359000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x40359000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x40359000 0x3000>;
+
+			mpll: mpll {
+				compatible = "sprd,sc9863a-mpll";
+				reg = <0 0x100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g5_regs: syscon@4035c000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x4035c000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x4035c000 0x3000>;
+
+			rpll: rpll {
+				compatible = "sprd,sc9863a-rpll";
+				reg = <0 0x100>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g7_regs: syscon@40363000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x40363000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x40363000 0x3000>;
+
+			dpll: dpll {
+				compatible = "sprd,sc9863a-dpll";
+				reg = <0 0x100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		mm_ahb_regs: syscon@60800000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x60800000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x60800000 0x3000>;
+
+			mm_gate: mm-gate {
+				compatible = "sprd,sc9863a-mm-gate";
+				reg = <0 0x1100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		ap_apb_regs: syscon@71300000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x71300000 0 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x71300000 0x4000>;
+
+			apapb_gate: apapb-gate {
+				compatible = "sprd,sc9863a-apapb-gate";
+				reg = <0 0x1000>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		apb@70000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x70000000 0x10000000>;
+
+			uart0: serial@0 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart1: serial@100000 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x100000 0x100>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart2: serial@200000 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x200000 0x100>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart3: serial@300000 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x300000 0x100>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart4: serial@400000 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x400000 0x100>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ext_26m: ext-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "ext-26m";
+	};
+
+	ext_32k: ext-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ext-32k";
+	};
+
+	ext_4m: ext-4m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <4000000>;
+		clock-output-names = "ext-4m";
+	};
+
+	rco_100m: rco-100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "rco-100m";
+	};
+};
diff --git a/src/arm64/sprd/sharkl64.dtsi b/src/arm64/sprd/sharkl64.dtsi
new file mode 100644
index 0000000..69f64e7
--- /dev/null
+++ b/src/arm64/sprd/sharkl64.dtsi
@@ -0,0 +1,65 @@
+/*
+ * Spreadtrum Sharkl64 platform DTS file
+ *
+ * Copyright (C) 2014, Spreadtrum Communications Inc.
+ *
+ * This file is licensed under a dual GPLv2 or X11 license.
+ */
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ap-apb {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			uart0: serial@70000000 {
+				compatible = "sprd,sc9836-uart";
+				reg = <0 0x70000000 0 0x100>;
+				interrupts = <0 2 0xf04>;
+				clocks = <&clk26mhz>;
+				status = "disabled";
+			};
+
+			uart1: serial@70100000 {
+				compatible = "sprd,sc9836-uart";
+				reg = <0 0x70100000 0 0x100>;
+				interrupts = <0 3 0xf04>;
+				clocks = <&clk26mhz>;
+				status = "disabled";
+			};
+
+			uart2: serial@70200000 {
+				compatible = "sprd,sc9836-uart";
+				reg = <0 0x70200000 0 0x100>;
+				interrupts = <0 4 0xf04>;
+				clocks = <&clk26mhz>;
+				status = "disabled";
+			};
+
+			uart3: serial@70300000 {
+				compatible = "sprd,sc9836-uart";
+				reg = <0 0x70300000 0 0x100>;
+				interrupts = <0 5 0xf04>;
+				clocks = <&clk26mhz>;
+				status = "disabled";
+			};
+		};
+	};
+
+	clk26mhz: clk26mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+};
diff --git a/src/arm64/sprd/sp9860g-1h10.dts b/src/arm64/sprd/sp9860g-1h10.dts
new file mode 100644
index 0000000..6b95fd9
--- /dev/null
+++ b/src/arm64/sprd/sp9860g-1h10.dts
@@ -0,0 +1,74 @@
+/*
+ * Spreadtrum SP9860g board
+ *
+ * Copyright (C) 2017, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "sc9860.dtsi"
+#include "sc2731.dtsi"
+
+/ {
+	model = "Spreadtrum SP9860G 3GFHD Board";
+
+	compatible = "sprd,sp9860g-1h10", "sprd,sc9860";
+
+	aliases {
+		serial0 = &uart0; /* for Bluetooth */
+		serial1 = &uart1; /* UART console */
+		serial2 = &uart2; /* Reserved */
+		serial3 = &uart3; /* for GPS */
+		spi0 = &adi_bus;
+	};
+
+	memory{
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x60000000>,
+		      <0x1 0x80000000 0 0x60000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+	};
+
+	bat: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <1900000>;
+		charge-term-current-microamp = <120000>;
+		constant_charge_voltage_max_microvolt = <4350000>;
+		internal-resistance-micro-ohms = <250000>;
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>,
+			<4022000 85>, <3983000 80>, <3949000 75>,
+			<3917000 70>, <3889000 65>, <3864000 60>,
+			<3835000 55>, <3805000 50>, <3787000 45>,
+			<3777000 40>, <3773000 35>, <3770000 30>,
+			<3765000 25>, <3752000 20>, <3724000 15>,
+			<3680000 10>, <3605000 5>, <3400000 0>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/src/arm64/sprd/sp9863a-1h10.dts b/src/arm64/sprd/sp9863a-1h10.dts
new file mode 100644
index 0000000..5c32c15
--- /dev/null
+++ b/src/arm64/sprd/sp9863a-1h10.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc SP9863A-1h10 boards DTS file
+ *
+ * Copyright (C) 2019, Unisoc Inc.
+ */
+
+/dts-v1/;
+
+#include "sc9863a.dtsi"
+
+/ {
+	model = "Spreadtrum SP9863A-1H10 Board";
+
+	compatible = "sprd,sp9863a-1h10", "sprd,sc9863a";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+		bootargs = "earlycon";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/src/arm64/sprd/ums512-1h10.dts b/src/arm64/sprd/ums512-1h10.dts
new file mode 100644
index 0000000..46890f6
--- /dev/null
+++ b/src/arm64/sprd/ums512-1h10.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Unisoc UMS512-1h10 boards DTS file
+ *
+ * Copyright (C) 2021, Unisoc Inc.
+ */
+
+/dts-v1/;
+
+#include "ums512.dtsi"
+
+/ {
+	model = "Unisoc UMS512-1H10 Board";
+
+	compatible = "sprd,ums512-1h10", "sprd,ums512";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+/* SD card */
+&sdio0 {
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	sprd,phy-delay-sd-uhs-sdr104 = <0x7f 0x73 0x72 0x72>;
+	sprd,phy-delay-sd-uhs-sdr50 = <0x6e 0x7f 0x01 0x01>;
+	sprd,phy-delay-sd-highspeed = <0x7f 0x1a 0x9a 0x9a>;
+	sprd,phy-delay-legacy = <0x7f 0x1a 0x9a 0x9a>;
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+};
+
+/* EMMC storage */
+&sdio3 {
+	status = "okay";
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	cap-mmc-hw-reset;
+};
diff --git a/src/arm64/sprd/ums512.dtsi b/src/arm64/sprd/ums512.dtsi
new file mode 100644
index 0000000..024be59
--- /dev/null
+++ b/src/arm64/sprd/ums512.dtsi
@@ -0,0 +1,911 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Unisoc UMS512 SoC DTS file
+ *
+ * Copyright (C) 2021, Unisoc Inc.
+ */
+
+#include <dt-bindings/clock/sprd,ums512-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+				core4 {
+					cpu = <&CPU4>;
+				};
+				core5 {
+					cpu = <&CPU5>;
+				};
+				core6 {
+					cpu = <&CPU6>;
+				};
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+	};
+
+	idle-states {
+		entry-method = "psci";
+		CORE_PD: core-pd {
+			compatible = "arm,idle-state";
+			entry-latency-us = <4000>;
+			exit-latency-us = <4000>;
+			min-residency-us = <10000>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x00010000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@12000000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x12000000 0 0x20000>,	/* GICD */
+			      <0x0 0x12040000 0 0x100000>;	/* GICR */
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			redistributor-stride = <0x0 0x20000>;	/* 128KB stride */
+			#redistributor-regions = <1>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ap_ahb_regs: syscon@20100000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x20100000 0 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x20100000 0x4000>;
+
+			apahb_gate: clock-controller@0 {
+				compatible = "sprd,ums512-apahb-gate";
+				reg = <0x0 0x3000>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		pub_apb_regs: syscon@31050000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x31050000 0 0x9000>;
+		};
+
+		top_dvfs_apb_regs: syscon@322a0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x322a0000 0 0x8000>;
+		};
+
+		ap_intc0_regs: syscon@32310000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32310000 0 0x1000>;
+		};
+
+		ap_intc1_regs: syscon@32320000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32320000 0 0x1000>;
+		};
+
+		ap_intc2_regs: syscon@32330000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32330000 0 0x1000>;
+		};
+
+		ap_intc3_regs: syscon@32340000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32340000 0 0x1000>;
+		};
+
+		ap_intc4_regs: syscon@32350000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32350000 0 0x1000>;
+		};
+
+		ap_intc5_regs: syscon@32360000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32360000 0 0x1000>;
+		};
+
+		anlg_phy_g0_regs: syscon@32390000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32390000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x32390000 0x3000>;
+
+			dpll0: clock-controller@0 {
+				compatible = "sprd,ums512-g0-pll";
+				reg = <0x0 0x100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g2_regs: syscon@323b0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x323b0000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x323b0000 0x3000>;
+
+			mpll1: clock-controller@0 {
+				compatible = "sprd,ums512-g2-pll";
+				reg = <0x0 0x100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g3_regs: syscon@323c0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x323c0000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x323c0000 0x3000>;
+
+			pll1: clock-controller@0 {
+				compatible = "sprd,ums512-g3-pll";
+				reg = <0x0 0x3000>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_gc_regs: syscon@323e0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x323e0000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x323e0000 0x3000>;
+
+			pll2: clock-controller@0 {
+				compatible = "sprd,ums512-gc-pll";
+				reg = <0x0 0x100>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g10_regs: syscon@323f0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x323f0000 0 0x3000>;
+		};
+
+		aon_apb_regs: syscon@327d0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x327d0000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x327d0000 0x3000>;
+
+			aonapb_gate: clock-controller@0 {
+				compatible = "sprd,ums512-aon-gate";
+				reg = <0x0 0x3000>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		pmu_apb_regs: syscon@327e0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x327e0000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x327e0000 0x3000>;
+
+			pmu_gate: clock-controller@0 {
+				compatible = "sprd,ums512-pmu-gate";
+				reg = <0x0 0x3000>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		audcp_apb_regs: syscon@3350d000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x3350d000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x3350d000 0x1000>;
+
+			audcpapb_gate: clock-controller@0 {
+				compatible = "sprd,ums512-audcpapb-gate";
+				reg = <0x0 0x300>;
+				#clock-cells = <1>;
+			};
+		};
+
+		audcp_ahb_regs: syscon@335e0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x335e0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x335e0000 0x1000>;
+
+			audcpahb_gate: clock-controller@0 {
+				compatible = "sprd,ums512-audcpahb-gate";
+				reg = <0x0 0x300>;
+				#clock-cells = <1>;
+			};
+		};
+
+		gpu_apb_regs: syscon@60100000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x60100000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x60100000 0x3000>;
+
+			gpu_clk: clock-controller@0 {
+				compatible = "sprd,ums512-gpu-clk";
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				reg = <0x0 0x100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		gpu_dvfs_apb_regs: syscon@60110000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x60110000 0 0x3000>;
+		};
+
+		mm_ahb_regs: syscon@62200000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x62200000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x62200000 0x3000>;
+
+			mm_gate: clock-controller@0 {
+				compatible = "sprd,ums512-mm-gate-clk";
+				reg = <0x0 0x3000>;
+				#clock-cells = <1>;
+			};
+		};
+
+		ap_apb_regs: syscon@71000000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x71000000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x71000000 0x3000>;
+
+			apapb_gate: clock-controller@0 {
+				compatible = "sprd,ums512-apapb-gate";
+				reg = <0x0 0x3000>;
+				#clock-cells = <1>;
+			};
+		};
+
+		ap_clk: clock-controller@20200000 {
+			compatible = "sprd,ums512-ap-clk";
+			reg = <0 0x20200000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "ext-26m";
+			#clock-cells = <1>;
+		};
+
+		aon_clk: clock-controller@32080000 {
+			compatible = "sprd,ums512-aonapb-clk";
+			reg = <0 0x32080000 0 0x1000>;
+			clocks = <&ext_26m>, <&ext_32k>,
+				 <&ext_4m>, <&rco_100m>;
+			clock-names = "ext-26m", "ext-32k",
+				      "ext-4m", "rco-100m";
+			#clock-cells = <1>;
+		};
+
+		mm_clk: clock-controller@62100000 {
+			compatible = "sprd,ums512-mm-clk";
+			reg = <0 0x62100000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "ext-26m";
+			#clock-cells = <1>;
+		};
+
+		/* SoC Funnel */
+		funnel@3c002000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x3c002000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_soc_out_port: endpoint {
+						remote-endpoint = <&etb_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+					funnel_soc_in_port: endpoint {
+						remote-endpoint =
+						<&funnel_corinth_out_port>;
+					};
+				};
+			};
+		};
+
+		/* SoC ETF */
+		soc_etb: etb@3c003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x3c003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etb_in: endpoint {
+						remote-endpoint =
+						<&funnel_soc_out_port>;
+					};
+				};
+			};
+		};
+
+		/* AP-CPU Funnel for core3/4/5/7 */
+		funnel@3e001000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x3e001000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_corinth_lit_out_port: endpoint {
+						remote-endpoint =
+						<&corinth_etf_lit_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_core_in_port3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_core_in_port4: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel_core_in_port5: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					funnel_core_in_port7: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		/* AP-CPU ETF for little cores */
+		etf@3e002000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x3e002000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					corinth_etf_lit_out: endpoint {
+						remote-endpoint =
+						<&funnel_corinth_from_lit_in_port>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					corinth_etf_lit_in: endpoint {
+						remote-endpoint =
+						<&funnel_corinth_lit_out_port>;
+					};
+				};
+			};
+		};
+
+		/* AP-CPU ETF for big cores */
+		etf@3e003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x3e003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					corinth_etf_big_out: endpoint {
+						remote-endpoint =
+						<&funnel_corinth_from_big_in_port>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					corinth_etf_big_in: endpoint {
+						remote-endpoint =
+						<&funnel_corinth_big_out_port>;
+					};
+				};
+			};
+		};
+
+		/* Funnel to SoC */
+		funnel@3e004000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x3e004000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_corinth_out_port: endpoint {
+						remote-endpoint =
+						<&funnel_soc_in_port>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_corinth_from_lit_in_port: endpoint {
+						remote-endpoint = <&corinth_etf_lit_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_corinth_from_big_in_port: endpoint {
+						remote-endpoint = <&corinth_etf_big_out>;
+					};
+				};
+			};
+		};
+
+		/* AP-CPU Funnel for core0/1/2/6 */
+		funnel@3e005000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x3e005000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_corinth_big_out_port: endpoint {
+						remote-endpoint = <&corinth_etf_big_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_core_in_port0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_core_in_port1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel_core_in_port2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					funnel_core_in_port6: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+			};
+		};
+
+		etm0: etm@3f040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f040000 0 0x1000>;
+			cpu = <&CPU0>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm1: etm@3f140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f140000 0 0x1000>;
+			cpu = <&CPU1>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm2: etm@3f240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f240000 0 0x1000>;
+			cpu = <&CPU2>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm3: etm@3f340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f340000 0 0x1000>;
+			cpu = <&CPU3>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port3>;
+					};
+				};
+			};
+		};
+
+		etm4: etm@3f440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f440000 0 0x1000>;
+			cpu = <&CPU4>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port4>;
+					};
+				};
+			};
+		};
+
+		etm5: etm@3f540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f540000 0 0x1000>;
+			cpu = <&CPU5>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port5>;
+					};
+				};
+			};
+		};
+
+		etm6: etm@3f640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f640000 0 0x1000>;
+			cpu = <&CPU6>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port6>;
+					};
+				};
+			};
+		};
+
+		etm7: etm@3f740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f740000 0 0x1000>;
+			cpu = <&CPU7>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port7>;
+					};
+				};
+			};
+		};
+
+		apb@70000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x70000000 0x10000000>;
+
+			uart0: serial@0 {
+				compatible = "sprd,ums512-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart1: serial@100000 {
+				compatible = "sprd,ums512-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x100000 0x100>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			sdio0: mmc@1100000 {
+				compatible = "sprd,sdhci-r11";
+				reg = <0x1100000 0x1000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "sdio", "enable";
+				clocks = <&ap_clk CLK_SDIO0_2X>,
+					 <&apapb_gate CLK_SDIO0_EB>;
+				assigned-clocks = <&ap_clk CLK_SDIO0_2X>;
+				assigned-clock-parents = <&pll1 CLK_RPLL>;
+				status = "disabled";
+			};
+
+			sdio3: mmc@1400000 {
+				compatible = "sprd,sdhci-r11";
+				reg = <0x1400000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "sdio", "enable";
+				clocks = <&ap_clk CLK_EMMC_2X>,
+					 <&apapb_gate CLK_EMMC_EB>;
+				assigned-clocks = <&ap_clk CLK_EMMC_2X>;
+				assigned-clock-parents = <&pll1 CLK_RPLL>;
+				status = "disabled";
+			};
+		};
+
+		aon: bus@32000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x32000000 0x1000000>;
+
+			adi_bus: spi@100000 {
+				compatible = "sprd,ums512-adi";
+				reg = <0x100000 0x100000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				sprd,hw-channels = <2 0x18cc>, <3 0x18cc>, <13 0x1854>, <15 0x1874>,
+					<17 0x1844>,<19 0x1844>, <21 0x1864>, <30 0x1820>,
+					<35 0x19b8>, <39 0x19ac>;
+			};
+		};
+	};
+
+	ext_26m: clk-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "ext-26m";
+	};
+
+	ext_32k: clk-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ext-32k";
+	};
+
+	ext_4m: clk-4m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <4000000>;
+		clock-output-names = "ext-4m";
+	};
+
+	rco_100m: clk-100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "rco-100m";
+	};
+};
diff --git a/src/arm64/sprd/whale2.dtsi b/src/arm64/sprd/whale2.dtsi
new file mode 100644
index 0000000..fece497
--- /dev/null
+++ b/src/arm64/sprd/whale2.dtsi
@@ -0,0 +1,314 @@
+/*
+ * Spreadtrum Whale2 platform peripherals
+ *
+ * Copyright (C) 2016, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#include <dt-bindings/clock/sprd,sc9860-clk.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ap_ahb_regs: syscon@20210000 {
+			compatible = "syscon";
+			reg = <0 0x20210000 0 0x10000>;
+		};
+
+		pmu_regs: syscon@402b0000 {
+			compatible = "syscon";
+			reg = <0 0x402b0000 0 0x10000>;
+		};
+
+		aon_regs: syscon@402e0000 {
+			compatible = "syscon";
+			reg = <0 0x402e0000 0 0x10000>;
+		};
+
+		ana_regs: syscon@40400000 {
+			compatible = "syscon";
+			reg = <0 0x40400000 0 0x10000>;
+		};
+
+		agcp_regs: syscon@415e0000 {
+			compatible = "syscon";
+			reg = <0 0x415e0000 0 0x1000000>;
+		};
+
+		vsp_regs: syscon@61100000 {
+			compatible = "syscon";
+			reg = <0 0x61100000 0 0x10000>;
+		};
+
+		cam_regs: syscon@62100000 {
+			compatible = "syscon";
+			reg = <0 0x62100000 0 0x10000>;
+		};
+
+		disp_regs: syscon@63100000 {
+			compatible = "syscon";
+			reg = <0 0x63100000 0 0x10000>;
+		};
+
+		ap_apb_regs: syscon@70b00000 {
+			compatible = "syscon";
+			reg = <0 0x70b00000 0 0x40000>;
+		};
+
+		ap-apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x70000000 0x10000000>;
+
+			uart0: serial@0 {
+				compatible = "sprd,sc9860-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "enable", "uart", "source";
+				clocks = <&apapb_gate CLK_UART0_EB>,
+				       <&ap_clk CLK_UART0>, <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart1: serial@100000 {
+				compatible = "sprd,sc9860-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x100000 0x100>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "enable", "uart", "source";
+				clocks = <&apapb_gate CLK_UART1_EB>,
+				       <&ap_clk CLK_UART1>, <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart2: serial@200000 {
+				compatible = "sprd,sc9860-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x200000 0x100>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "enable", "uart", "source";
+				clocks = <&apapb_gate CLK_UART2_EB>,
+				       <&ap_clk CLK_UART2>, <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart3: serial@300000 {
+				compatible = "sprd,sc9860-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x300000 0x100>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "enable", "uart", "source";
+				clocks = <&apapb_gate CLK_UART3_EB>,
+				       <&ap_clk CLK_UART3>, <&ext_26m>;
+				status = "disabled";
+			};
+		};
+
+		ap-ahb {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			ap_dma: dma-controller@20100000 {
+				compatible = "sprd,sc9860-dma";
+				reg = <0 0x20100000 0 0x4000>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				#dma-cells = <1>;
+				/* For backwards compatibility: */
+				#dma-channels = <32>;
+				dma-channels = <32>;
+				clock-names = "enable";
+				clocks = <&apahb_gate CLK_DMA_EB>;
+			};
+
+			sdio3: sdio@50430000 {
+				compatible = "sprd,sdhci-r11";
+				reg = <0 0x50430000 0 0x1000>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+
+				clock-names = "sdio", "enable", "2x_enable";
+				clocks = <&aon_prediv CLK_EMMC_2X>,
+				       <&apahb_gate CLK_EMMC_EB>,
+				       <&aon_gate CLK_EMMC_2X_EN>;
+				assigned-clocks = <&aon_prediv CLK_EMMC_2X>;
+				assigned-clock-parents = <&clk_l0_409m6>;
+
+				sprd,phy-delay-mmc-hs400 = <0x44 0x7f 0x2e 0x2e>;
+				sprd,phy-delay-mmc-hs200 = <0x0 0x8c 0x8c 0x8c>;
+				sprd,phy-delay-mmc-ddr52 = <0x3f 0x75 0x14 0x14>;
+				sprd,phy-delay-mmc-hs400es = <0x3f 0x3f 0x2e 0x2e>;
+				vmmc-supply = <&vddemmccore>;
+				bus-width = <8>;
+				non-removable;
+				no-sdio;
+				no-sd;
+				cap-mmc-hw-reset;
+				mmc-hs400-enhanced-strobe;
+				mmc-hs400-1_8v;
+				mmc-hs200-1_8v;
+				mmc-ddr-1_8v;
+			};
+		};
+
+		aon {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			adi_bus: spi@40030000 {
+				compatible = "sprd,sc9860-adi";
+				reg = <0 0x40030000 0 0x10000>;
+				hwlocks = <&hwlock 0>;
+				hwlock-names = "adi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			timer@40050000 {
+				compatible = "sprd,sc9860-timer";
+				reg = <0 0x40050000 0 0x20>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_32k>;
+			};
+
+			timer@40050020 {
+				compatible = "sprd,sc9860-suspend-timer";
+				reg = <0 0x40050020 0 0x20>;
+				clocks = <&ext_32k>;
+			};
+
+			hwlock: hwspinlock@40500000 {
+				compatible = "sprd,hwspinlock-r3p0";
+				reg = <0 0x40500000 0 0x1000>;
+				#hwlock-cells = <1>;
+				clock-names = "enable";
+				clocks = <&aon_gate CLK_SPLK_EB>;
+			};
+
+			eic_debounce: gpio@40210000 {
+				compatible = "sprd,sc9860-eic-debounce";
+				reg = <0 0x40210000 0 0x80>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			eic_latch: gpio@40210080 {
+				compatible = "sprd,sc9860-eic-latch";
+				reg = <0 0x40210080 0 0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			eic_async: gpio@402100a0 {
+				compatible = "sprd,sc9860-eic-async";
+				reg = <0 0x402100a0 0 0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			eic_sync: gpio@402100c0 {
+				compatible = "sprd,sc9860-eic-sync";
+				reg = <0 0x402100c0 0 0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			ap_gpio: gpio@40280000 {
+				compatible = "sprd,sc9860-gpio";
+				reg = <0 0x40280000 0 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			pin_controller: pinctrl@402a0000 {
+				compatible = "sprd,sc9860-pinctrl";
+				reg = <0 0x402a0000 0 0x10000>;
+			};
+
+			watchdog@40310000 {
+				compatible = "sprd,sp9860-wdt";
+				reg = <0 0x40310000 0 0x1000>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-sec = <12>;
+				clock-names = "enable", "rtc_enable";
+				clocks = <&aon_gate CLK_APCPU_WDG_EB>,
+				       <&aon_gate CLK_AP_WDG_RTC_EB>;
+			};
+		};
+
+		agcp {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			agcp_dma: dma-controller@41580000 {
+				compatible = "sprd,sc9860-dma";
+				reg = <0 0x41580000 0 0x4000>;
+				#dma-cells = <1>;
+				/* For backwards compatibility: */
+				#dma-channels = <32>;
+				dma-channels = <32>;
+				clock-names = "enable", "ashb_eb";
+				clocks = <&agcp_gate CLK_AGCP_DMAAP_EB>,
+				       <&agcp_gate CLK_AGCP_AP_ASHB_EB>;
+			};
+		};
+	};
+
+	ext_32k: ext_32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ext-32k";
+	};
+
+	ext_26m: ext_26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "ext-26m";
+	};
+
+	ext_rco_100m: ext_rco_100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "ext-rco-100m";
+	};
+
+	clk_l0_409m6: clk_l0_409m6 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <409600000>;
+		clock-output-names = "ext-409m6";
+	};
+};