Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/arm64/sprd/whale2.dtsi b/src/arm64/sprd/whale2.dtsi
new file mode 100644
index 0000000..fece497
--- /dev/null
+++ b/src/arm64/sprd/whale2.dtsi
@@ -0,0 +1,314 @@
+/*
+ * Spreadtrum Whale2 platform peripherals
+ *
+ * Copyright (C) 2016, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#include <dt-bindings/clock/sprd,sc9860-clk.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ap_ahb_regs: syscon@20210000 {
+ compatible = "syscon";
+ reg = <0 0x20210000 0 0x10000>;
+ };
+
+ pmu_regs: syscon@402b0000 {
+ compatible = "syscon";
+ reg = <0 0x402b0000 0 0x10000>;
+ };
+
+ aon_regs: syscon@402e0000 {
+ compatible = "syscon";
+ reg = <0 0x402e0000 0 0x10000>;
+ };
+
+ ana_regs: syscon@40400000 {
+ compatible = "syscon";
+ reg = <0 0x40400000 0 0x10000>;
+ };
+
+ agcp_regs: syscon@415e0000 {
+ compatible = "syscon";
+ reg = <0 0x415e0000 0 0x1000000>;
+ };
+
+ vsp_regs: syscon@61100000 {
+ compatible = "syscon";
+ reg = <0 0x61100000 0 0x10000>;
+ };
+
+ cam_regs: syscon@62100000 {
+ compatible = "syscon";
+ reg = <0 0x62100000 0 0x10000>;
+ };
+
+ disp_regs: syscon@63100000 {
+ compatible = "syscon";
+ reg = <0 0x63100000 0 0x10000>;
+ };
+
+ ap_apb_regs: syscon@70b00000 {
+ compatible = "syscon";
+ reg = <0 0x70b00000 0 0x40000>;
+ };
+
+ ap-apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x70000000 0x10000000>;
+
+ uart0: serial@0 {
+ compatible = "sprd,sc9860-uart",
+ "sprd,sc9836-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "enable", "uart", "source";
+ clocks = <&apapb_gate CLK_UART0_EB>,
+ <&ap_clk CLK_UART0>, <&ext_26m>;
+ status = "disabled";
+ };
+
+ uart1: serial@100000 {
+ compatible = "sprd,sc9860-uart",
+ "sprd,sc9836-uart";
+ reg = <0x100000 0x100>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "enable", "uart", "source";
+ clocks = <&apapb_gate CLK_UART1_EB>,
+ <&ap_clk CLK_UART1>, <&ext_26m>;
+ status = "disabled";
+ };
+
+ uart2: serial@200000 {
+ compatible = "sprd,sc9860-uart",
+ "sprd,sc9836-uart";
+ reg = <0x200000 0x100>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "enable", "uart", "source";
+ clocks = <&apapb_gate CLK_UART2_EB>,
+ <&ap_clk CLK_UART2>, <&ext_26m>;
+ status = "disabled";
+ };
+
+ uart3: serial@300000 {
+ compatible = "sprd,sc9860-uart",
+ "sprd,sc9836-uart";
+ reg = <0x300000 0x100>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "enable", "uart", "source";
+ clocks = <&apapb_gate CLK_UART3_EB>,
+ <&ap_clk CLK_UART3>, <&ext_26m>;
+ status = "disabled";
+ };
+ };
+
+ ap-ahb {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ap_dma: dma-controller@20100000 {
+ compatible = "sprd,sc9860-dma";
+ reg = <0 0x20100000 0 0x4000>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ /* For backwards compatibility: */
+ #dma-channels = <32>;
+ dma-channels = <32>;
+ clock-names = "enable";
+ clocks = <&apahb_gate CLK_DMA_EB>;
+ };
+
+ sdio3: sdio@50430000 {
+ compatible = "sprd,sdhci-r11";
+ reg = <0 0x50430000 0 0x1000>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+
+ clock-names = "sdio", "enable", "2x_enable";
+ clocks = <&aon_prediv CLK_EMMC_2X>,
+ <&apahb_gate CLK_EMMC_EB>,
+ <&aon_gate CLK_EMMC_2X_EN>;
+ assigned-clocks = <&aon_prediv CLK_EMMC_2X>;
+ assigned-clock-parents = <&clk_l0_409m6>;
+
+ sprd,phy-delay-mmc-hs400 = <0x44 0x7f 0x2e 0x2e>;
+ sprd,phy-delay-mmc-hs200 = <0x0 0x8c 0x8c 0x8c>;
+ sprd,phy-delay-mmc-ddr52 = <0x3f 0x75 0x14 0x14>;
+ sprd,phy-delay-mmc-hs400es = <0x3f 0x3f 0x2e 0x2e>;
+ vmmc-supply = <&vddemmccore>;
+ bus-width = <8>;
+ non-removable;
+ no-sdio;
+ no-sd;
+ cap-mmc-hw-reset;
+ mmc-hs400-enhanced-strobe;
+ mmc-hs400-1_8v;
+ mmc-hs200-1_8v;
+ mmc-ddr-1_8v;
+ };
+ };
+
+ aon {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ adi_bus: spi@40030000 {
+ compatible = "sprd,sc9860-adi";
+ reg = <0 0x40030000 0 0x10000>;
+ hwlocks = <&hwlock 0>;
+ hwlock-names = "adi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ timer@40050000 {
+ compatible = "sprd,sc9860-timer";
+ reg = <0 0x40050000 0 0x20>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ext_32k>;
+ };
+
+ timer@40050020 {
+ compatible = "sprd,sc9860-suspend-timer";
+ reg = <0 0x40050020 0 0x20>;
+ clocks = <&ext_32k>;
+ };
+
+ hwlock: hwspinlock@40500000 {
+ compatible = "sprd,hwspinlock-r3p0";
+ reg = <0 0x40500000 0 0x1000>;
+ #hwlock-cells = <1>;
+ clock-names = "enable";
+ clocks = <&aon_gate CLK_SPLK_EB>;
+ };
+
+ eic_debounce: gpio@40210000 {
+ compatible = "sprd,sc9860-eic-debounce";
+ reg = <0 0x40210000 0 0x80>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ eic_latch: gpio@40210080 {
+ compatible = "sprd,sc9860-eic-latch";
+ reg = <0 0x40210080 0 0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ eic_async: gpio@402100a0 {
+ compatible = "sprd,sc9860-eic-async";
+ reg = <0 0x402100a0 0 0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ eic_sync: gpio@402100c0 {
+ compatible = "sprd,sc9860-eic-sync";
+ reg = <0 0x402100c0 0 0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ ap_gpio: gpio@40280000 {
+ compatible = "sprd,sc9860-gpio";
+ reg = <0 0x40280000 0 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pin_controller: pinctrl@402a0000 {
+ compatible = "sprd,sc9860-pinctrl";
+ reg = <0 0x402a0000 0 0x10000>;
+ };
+
+ watchdog@40310000 {
+ compatible = "sprd,sp9860-wdt";
+ reg = <0 0x40310000 0 0x1000>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ timeout-sec = <12>;
+ clock-names = "enable", "rtc_enable";
+ clocks = <&aon_gate CLK_APCPU_WDG_EB>,
+ <&aon_gate CLK_AP_WDG_RTC_EB>;
+ };
+ };
+
+ agcp {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ agcp_dma: dma-controller@41580000 {
+ compatible = "sprd,sc9860-dma";
+ reg = <0 0x41580000 0 0x4000>;
+ #dma-cells = <1>;
+ /* For backwards compatibility: */
+ #dma-channels = <32>;
+ dma-channels = <32>;
+ clock-names = "enable", "ashb_eb";
+ clocks = <&agcp_gate CLK_AGCP_DMAAP_EB>,
+ <&agcp_gate CLK_AGCP_AP_ASHB_EB>;
+ };
+ };
+ };
+
+ ext_32k: ext_32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "ext-32k";
+ };
+
+ ext_26m: ext_26m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "ext-26m";
+ };
+
+ ext_rco_100m: ext_rco_100m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "ext-rco-100m";
+ };
+
+ clk_l0_409m6: clk_l0_409m6 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <409600000>;
+ clock-output-names = "ext-409m6";
+ };
+};