Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/arm64/qcom/sdm845-cheza-r1.dts b/src/arm64/qcom/sdm845-cheza-r1.dts
new file mode 100644
index 0000000..bd7c25b
--- /dev/null
+++ b/src/arm64/qcom/sdm845-cheza-r1.dts
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Cheza board device tree source
+ *
+ * Copyright 2018 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sdm845-cheza.dtsi"
+
+/ {
+ model = "Google Cheza (rev1)";
+ compatible = "google,cheza-rev1", "qcom,sdm845";
+
+ /*
+ * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children
+ */
+
+ /*
+ * NOTE: Technically pp3500_a is not the exact same signal as
+ * pp3500_a_vbob (there's a load switch between them and the EC can
+ * control pp3500_a via "en_pp3300_a"), but from the AP's point of
+ * view they are the same.
+ */
+ pp3500_a:
+ pp3500_a_vbob: pp3500-a-vbob-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_bob";
+
+ /*
+ * Comes on automatically when pp5000_ldo comes on, which
+ * comes on automatically when ppvar_sys comes on
+ */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3500000>;
+ regulator-max-microvolt = <3500000>;
+
+ vin-supply = <&ppvar_sys>;
+ };
+
+ pp3300_dx_edp: pp3300-dx-edp-regulator {
+ /* Yes, it's really 3.5 despite the name of the signal */
+ regulator-min-microvolt = <3500000>;
+ regulator-max-microvolt = <3500000>;
+
+ vin-supply = <&pp3500_a>;
+ };
+};
+
+/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */
+
+/*
+ * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware
+ * that limits them to 3.0, and trying to run at 3.3V with that old firmware
+ * prevents the system from booting.
+ */
+&src_pp3000_l19a {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+};
+
+&src_pp3300_l22a {
+ /delete-property/regulator-boot-on;
+ /delete-property/regulator-always-on;
+};
+
+&src_pp3300_l28a {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+};
+
+&src_vreg_bob {
+ regulator-min-microvolt = <3500000>;
+ regulator-max-microvolt = <3500000>;
+ vin-supply = <&pp3500_a_vbob>;
+};
+
+/*
+ * NON-REGULATOR OVERRIDES
+ * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label
+ */
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+ gpio-line-names = "AP_SPI_FP_MISO",
+ "AP_SPI_FP_MOSI",
+ "AP_SPI_FP_CLK",
+ "AP_SPI_FP_CS_L",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "",
+ "FP_RST_L",
+ "FCAM_EN",
+ "",
+ "EDP_BRIJ_IRQ",
+ "EC_IN_RW_ODL",
+ "",
+ "RCAM_MCLK",
+ "FCAM_MCLK",
+ "",
+ "RCAM_EN",
+ "CCI0_SDA",
+ "CCI0_SCL",
+ "CCI1_SDA",
+ "CCI1_SCL",
+ "FCAM_RST_L",
+ "",
+ "PEN_RST_L",
+ "PEN_IRQ_L",
+ "",
+ "RCAM_VSYNC",
+ "ESIM_MISO",
+ "ESIM_MOSI",
+ "ESIM_CLK",
+ "ESIM_CS_L",
+ "AP_PEN_1V8_SDA",
+ "AP_PEN_1V8_SCL",
+ "AP_TS_I2C_SDA",
+ "AP_TS_I2C_SCL",
+ "RCAM_RST_L",
+ "",
+ "AP_EDP_BKLTEN",
+ "AP_BRD_ID1",
+ "BOOT_CONFIG_4",
+ "AMP_IRQ_L",
+ "EDP_BRIJ_I2C_SDA",
+ "EDP_BRIJ_I2C_SCL",
+ "EN_PP3300_DX_EDP",
+ "SD_CD_ODL",
+ "BT_UART_RTS",
+ "BT_UART_CTS",
+ "BT_UART_RXD",
+ "BT_UART_TXD",
+ "AMP_I2C_SDA",
+ "AMP_I2C_SCL",
+ "AP_BRD_ID3",
+ "",
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI",
+ "FORCED_USB_BOOT",
+ "AMP_BCLK",
+ "AMP_LRCLK",
+ "AMP_DOUT",
+ "AMP_DIN",
+ "AP_BRD_ID2",
+ "PEN_PDCT_L",
+ "HP_MCLK",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "",
+ "",
+ "",
+ "",
+ "BT_SLIMBUS_DATA",
+ "BT_SLIMBUS_CLK",
+ "AMP_RESET_L",
+ "",
+ "FCAM_VSYNC",
+ "",
+ "AP_SKU_ID1",
+ "EC_WOV_BCLK",
+ "EC_WOV_LRCLK",
+ "EC_WOV_DOUT",
+ "",
+ "",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "",
+ "AP_SPI_CS0_L",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ "",
+ "",
+ "AP_SPI_CLK",
+ "",
+ "RFFE6_CLK",
+ "RFFE6_DATA",
+ "BOOT_CONFIG_1",
+ "BOOT_CONFIG_2",
+ "BOOT_CONFIG_0",
+ "EDP_BRIJ_EN",
+ "",
+ "USB_HS_TX_EN",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RST",
+ "UIM2_PRESENT",
+ "UIM1_DATA",
+ "UIM1_CLK",
+ "UIM1_RST",
+ "",
+ "AP_SKU_ID2",
+ "SDM_GRFC_8",
+ "SDM_GRFC_9",
+ "AP_RST_REQ",
+ "HP_IRQ",
+ "TS_RESET_L",
+ "PEN_EJECT_ODL",
+ "HUB_RST_L",
+ "FP_TO_AP_IRQ",
+ "AP_EC_INT_L",
+ "",
+ "",
+ "TS_INT_L",
+ "AP_SUSPEND_L",
+ "SDM_GRFC_3",
+ "",
+ "H1_AP_INT_ODL",
+ "QLINK_REQ",
+ "QLINK_EN",
+ "SDM_GRFC_2",
+ "BOOT_CONFIG_3",
+ "WMSS_RESET_L",
+ "SDM_GRFC_0",
+ "SDM_GRFC_1",
+ "RFFE3_DATA",
+ "RFFE3_CLK",
+ "RFFE4_DATA",
+ "RFFE4_CLK",
+ "RFFE5_DATA",
+ "RFFE5_CLK",
+ "GNSS_EN",
+ "WCI2_LTE_COEX_RXD",
+ "WCI2_LTE_COEX_TXD",
+ "AP_RAM_ID1",
+ "AP_RAM_ID2",
+ "RFFE1_DATA",
+ "RFFE1_CLK";
+};