diff --git a/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi b/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi
new file mode 100644
index 0000000..87d0293
--- /dev/null
+++ b/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi
@@ -0,0 +1,667 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2020, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ */
+
+#include "pm660.dtsi"
+#include "pm660l.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <318 0>;
+	qcom,board-id = <8 1>;
+	qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00>;
+
+	/* This part enables graphical output via bootloader-enabled display */
+	chosen {
+		bootargs = "earlycon=tty0 console=tty0";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "framebuffer0";
+
+		framebuffer0: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x9d400000 0 (1920 * 1080 * 4)>;
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+			status = "okay";
+		};
+	};
+
+	board_vbat: vbat-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT";
+
+		regulator-min-microvolt = <4000000>;
+		regulator-max-microvolt = <4000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	cam_vdig_imx300_219_vreg: cam-vdig-imx300-219-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "cam_vdig_imx300_219_vreg";
+		startup-delay-us = <0>;
+		enable-active-high;
+		gpio = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_vdig_default>;
+	};
+
+	cam_vana_front_vreg: cam-vana-front-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "cam_vana_front_vreg";
+		startup-delay-us = <0>;
+		enable-active-high;
+		gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&imx219_vana_default>;
+	};
+
+	cam_vana_rear_vreg: cam-vana-rear-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "cam_vana_rear_vreg";
+		startup-delay-us = <0>;
+		enable-active-high;
+		gpio = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		pinctrl-names = "default";
+		pinctrl-0 = <&imx300_vana_default>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-camera-focus {
+			label = "Camera Focus";
+			gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+			debounce-interval = <15>;
+		};
+
+		key-camera-snapshot {
+			label = "Camera Snapshot";
+			gpios = <&tlmm 113 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+			debounce-interval = <15>;
+		};
+
+		key-vol-down {
+			label = "Volume Down";
+			gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc00000 0x0 0x100000>;
+			record-size = <0x10000>;
+			console-size = <0x60000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+			status = "okay";
+		};
+
+		debug@ffb00000 {
+			reg = <0x00 0xffb00000 0x00 0x100000>;
+			no-map;
+		};
+
+		cont_splash_mem: splash@9d400000 {
+			reg = <0 0x9d400000 0 (1920 * 1080 * 4)>;
+			no-map;
+		};
+	};
+
+	/*
+	 * Until we hook up type-c detection, we
+	 * have to stick with this. But it works.
+	 */
+	extcon_usb: extcon-usb {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&adsp_pil {
+	firmware-name = "qcom/sdm630/Sony/nile/adsp.mdt";
+};
+
+&blsp_i2c1 {
+	status = "okay";
+
+	touchscreen: synaptics-rmi4-i2c@70 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts-extended = <&tlmm 45 0x2008>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_active &ts_lcd_id_active>;
+
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <220>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	/* SMB1351 charger */
+};
+
+/* I2C3, 4, 5, 7 and 8 are disabled on this board. */
+
+&blsp_i2c6 {
+	status = "okay";
+
+	/* NXP NFC */
+};
+
+&blsp1_uart2 {
+	status = "okay";
+
+	/* MSM serial console */
+};
+
+&blsp2_uart1 {
+	status = "okay";
+
+	/* HCI Bluetooth */
+};
+
+&pm660l_lpg {
+	qcom,power-source = <1>;
+
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEUP>;
+};
+
+&qhee_code {
+	reg = <0x00 0x85800000 0x00 0x3700000>;
+};
+
+&qusb2phy0 {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1b_0p925>;
+	vdda-pll-supply = <&vreg_l10a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm660l-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+
+		vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>;
+		vdd_l2-supply = <&vreg_bob>;
+		vdd_l3_l5_l7_l8-supply = <&vreg_bob>;
+		vdd_l4_l6-supply = <&vreg_bob>;
+		vdd_bob-supply = <&vph_pwr>;
+
+		vreg_s1b_1p125: s1 {
+			regulator-min-microvolt = <1125000>;
+			regulator-max-microvolt = <1125000>;
+			regulator-enable-ramp-delay = <200>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_s2b_1p05: s2 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-enable-ramp-delay = <200>;
+			regulator-ramp-delay = <0>;
+		};
+
+		/*
+		 * At least on Nile's configuration, S3B/S4B (VDD_CX) and
+		 * S5B (VDD_MX) are managed only through RPM Power Domains.
+		 * Trying to set a voltage on the main supply will create
+		 * havoc and freeze the SoC.
+		 * In any case, reference voltages for these regulators are:
+		 * S3B/S4B: 0.870V
+		 * S5B: 0.915V
+		 */
+
+		/* LDOs */
+		vreg_l1b_0p925: l1 {
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <928000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l2b_2p95: l2 {
+			/*
+			 * This regulator supports 1.648 - 3.104V on this board
+			 * but we set a max voltage of anything less than 2.7V
+			 * to satisfy a condition in sdhci.c that will disable
+			 * 3.3V SDHCI signaling, which happens to be not really
+			 * supported on the Xperia Nile/Ganges platform.
+			 */
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2696000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l3b_3p0: l3 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-min-microamp = <200>;
+			regulator-max-microamp = <600000>;
+			regulator-system-load = <100000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l4b_2p95: l4 {
+			regulator-min-microvolt = <2944000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+
+			regulator-min-microamp = <200>;
+			regulator-max-microamp = <600000>;
+			regulator-system-load = <570000>;
+			regulator-allow-set-load;
+		};
+
+		/*
+		 * Downstream specifies a range of 1721-3600mV,
+		 * but the only assigned consumers are SDHCI2 VMMC
+		 * and Coresight QPDI that both request pinned 2.95V.
+		 * Tighten the range to 1.8-3.328 (closest to 3.3) to
+		 * make the mmc driver happy.
+		 */
+		vreg_l5b_2p95: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3328000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+			regulator-system-load = <800000>;
+		};
+
+		vreg_l6b_3p3: l6 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l7b_3p125: l7 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3128000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l8b_3p3: l8 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		/* L9B (870mV) is currently unused */
+		/* L10B (915mV) is currently unused */
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3624000>;
+			regulator-enable-ramp-delay = <500>;
+			regulator-ramp-delay = <0>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm660-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+
+		vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>;
+		vdd_l2_l3-supply = <&vreg_s2b_1p05>;
+		vdd_l5-supply = <&vreg_s2b_1p05>;
+		vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>;
+		vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>;
+
+		/*
+		 * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed
+		 * by the Core Power Reduction hardened (CPRh) and the
+		 * Operating State Manager (OSM) HW automatically.
+		 */
+
+		vreg_s4a_2p04: s4 {
+			regulator-min-microvolt = <2040000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-enable-ramp-delay = <200>;
+			regulator-ramp-delay = <0>;
+			regulator-always-on;
+		};
+
+		vreg_s5a_1p35: s5 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-enable-ramp-delay = <200>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_s6a_0p87: s6 {
+			regulator-min-microvolt = <504000>;
+			regulator-max-microvolt = <992000>;
+			regulator-enable-ramp-delay = <150>;
+			regulator-ramp-delay = <0>;
+		};
+
+		/* LDOs */
+		vreg_l1a_1p225: l1 {
+			regulator-min-microvolt = <1226000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l2a_1p0: l2 {
+			regulator-min-microvolt = <944000>;
+			regulator-max-microvolt = <1008000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l3a_1p0: l3 {
+			regulator-min-microvolt = <944000>;
+			regulator-max-microvolt = <1008000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l5a_0p848: l5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <952000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l6a_1p3: l6 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1368000>;
+			regulator-allow-set-load;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l7a_1p2: l7 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l8a_1p8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-system-load = <325000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1804000>;
+			regulator-max-microvolt = <1896000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1944000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l11a_1p8: l11 {
+			regulator-min-microvolt = <1784000>;
+			regulator-max-microvolt = <1944000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1944000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		/* This gives power to the LPDDR4: never turn it off! */
+		vreg_l13a_1p8: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1944000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vreg_l14a_1p8: l14 {
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l15a_1p8: l15 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		/* L16A (2.70V) is unused */
+
+		vreg_l17a_1p8: l17 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l18a_1v8: l18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <10>;
+			regulator-min-microamp = <200>;
+			regulator-max-microamp = <50000>;
+			regulator-system-load = <10000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l19a_3p3: l19 {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+	};
+};
+
+&sdc2_state_on {
+	sd-cd-pins {
+		pins = "gpio54";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+};
+
+&sdc2_state_off {
+	sd-cd-pins {
+		pins = "gpio54";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+	supports-cqe;
+
+	/* SoMC Nile platform's eMMC doesn't support HS200 mode */
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+
+	vmmc-supply = <&vreg_l4b_2p95>;
+	vqmmc-supply = <&vreg_l8a_1p8>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&vreg_l5b_2p95>;
+	vqmmc-supply = <&vreg_l2b_2p95>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <8 4>;
+
+	ts_int_active: ts-int-active-state {
+		pins = "gpio45";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_lcd_id_active: ts-lcd-id-active-state {
+		pins = "gpio56";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	imx300_vana_default: imx300-vana-default-state {
+		pins = "gpio50";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	imx219_vana_default: imx219-vana-default-state {
+		pins = "gpio51";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	cam_vdig_default: cam-vdig-default-state {
+		pins = "gpio52";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+	extcon = <&extcon_usb>;
+};