diff --git a/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi b/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi
new file mode 100644
index 0000000..9dbde79
--- /dev/null
+++ b/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -0,0 +1,493 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include "msm8994.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+	/* required for bootloader to select correct board */
+
+	/*
+	 * We support MSM8994 v2 (0x20000) and v2.1 (0x20001).
+	 * The V1 chip (0x0 and 0x10000) is significantly different
+	 * and requires driver-side changes (including CPR, be warned!!).
+	 * Besides that, it's very rare.
+	 */
+	qcom,msm-id = <207 0x20000>, <207 0x20001>;
+	/* We only use pm8994+pmi8994. */
+	qcom,pmic-id = <0x10009 0x1000a 0x00 0x00>;
+	/* This property is shared across all kitakami devices. */
+	qcom,board-id = <8 0>;
+
+	/* Kitakami firmware doesn't support PSCI */
+	/delete-node/ psci;
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		button-0 {
+			label = "Volume Down";
+			gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		button-1 {
+			label = "Volume Up";
+			gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		button-2 {
+			label = "Camera Snapshot";
+			gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		button-3 {
+			label = "Camera Focus";
+			gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		/* This is for getting crash logs using Android downstream kernels */
+		ramoops@1fe00000 {
+			compatible = "ramoops";
+			reg = <0 0x1fe00000 0 0x200000>;
+			console-size = <0x100000>;
+			record-size = <0x10000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x80000>;
+		};
+
+		fb_region: fb_region@40000000 {
+			reg = <0 0x40000000 0 0x1000000>;
+			no-map;
+		};
+
+		tzapp: memory@c7800000 {
+			reg = <0 0xc7800000 0 0x1900000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_spi1 {
+	status = "okay";
+
+	/* FPC fingerprint reader */
+};
+
+/* I2C1 is disabled on this board */
+
+&blsp1_i2c2 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	/* NXP PN547 NFC */
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	touchscreen: rmi4-i2c-dev@2c {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x2c>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <42 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_active &ts_reset_active>;
+
+		vdd-supply = <&pm8994_l22>;
+		vio-supply = <&pm8994_s4>;
+
+		syna,reset-delay-ms = <220>;
+		syna,startup-delay-ms = <220>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_i2c5 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	/* sii8620 HDMI/MHL bridge */
+};
+
+&blsp2_uart2 {
+	status = "okay";
+};
+
+/*
+ * Kitakami bootloader only turns cont_splash on when it detects
+ * specific downstream MDSS/backlight nodes in the active DTB.
+ * One way to use that framebuffer is to load a secondary instance of
+ * LK with the downstream DTB appended and then, only from there, load
+ * mainline Linux.
+ */
+&cont_splash_mem {
+	reg = <0 0x03401000 0 0x2200000>;
+};
+
+&pmi8994_spmi_regulators {
+	/*
+	 * Yeah, this one *is* managed by RPMPD, but also needs
+	 * to be hacked up as a-o due to the GPU device only accepting a single
+	 * power domain.. which still isn't enough and forces us to bind
+	 * OXILI_CX and OXILI_GX together!
+	 */
+	vdd_gfx: s2 {
+		regulator-name = "VDD_GFX";
+		regulator-min-microvolt = <980000>;
+		regulator-max-microvolt = <980000>;
+
+		/* hack until we rig up the gpu consumer */
+		regulator-always-on;
+	};
+};
+
+&rpm_requests {
+	/* PMI8994 should probe first, because pmi8994_bby supplies some of PM8994's regulators */
+	pmi8994_regulators: regulators-0 {
+		compatible = "qcom,rpm-pmi8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_bst_byp-supply = <&vph_pwr>;
+
+		pmi8994_s1: s1 {
+			regulator-min-microvolt = <1025000>;
+			regulator-max-microvolt = <1025000>;
+		};
+
+		/* S2 & S3 - VDD_GFX */
+
+		pmi8994_bby: boost-bypass {
+			regulator-min-microvolt = <3150000>;
+			regulator-max-microvolt = <3600000>;
+		};
+	};
+
+	pm8994_regulators: regulators-1 {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pmi8994_s1>;
+		vdd_l2_l26_l28-supply = <&pm8994_s3>;
+		vdd_l3_l11-supply = <&pm8994_s3>;
+		vdd_l4_l27_l31-supply = <&pm8994_s3>;
+		vdd_l6_l12_l32-supply = <&pm8994_s5>;
+		vdd_l8_l16_l30-supply = <&vph_pwr>;
+		vdd_l9_l10_l18_l22-supply = <&pmi8994_bby>;
+		vdd_l13_l19_l23_l24-supply = <&pmi8994_bby>;
+		vdd_l14_l15-supply = <&pm8994_s5>;
+		vdd_l17_l29-supply = <&pmi8994_bby>;
+		vdd_l20_l21-supply = <&pmi8994_bby>;
+		vdd_l25-supply = <&pm8994_s3>;
+		vdd_lvs1_2-supply = <&pm8994_s4>;
+
+		/* S1, S2, S6 and S12 are managed by RPMPD */
+
+		pm8994_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8994_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <325000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+		};
+
+		pm8994_s5: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pm8994_s7: s7 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		/*
+		 * S8 - SPMI-managed VDD_APC0
+		 * S9, S10 and S11 (the main one) - SPMI-managed VDD_APC1
+		 */
+
+		pm8994_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l2: l2 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-system-load = <10000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l3: l3 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-boot-on;
+		};
+
+		pm8994_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		/* L5 is inaccessible from RPM */
+
+		pm8994_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		/* L7 is inaccessible from RPM */
+
+		pm8994_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l11: l11 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <10000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8994_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <10000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8994_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l17: l17 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			regulator-boot-on;
+		};
+
+		pm8994_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8994_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-boot-on;
+		};
+
+		pm8994_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <570000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <800000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-boot-on;
+		};
+
+		pm8994_l23: l23 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8994_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3150000>;
+		};
+
+		pm8994_l25: l25 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-boot-on;
+		};
+
+		pm8994_l26: l26 {
+			regulator-min-microvolt = <987500>;
+			regulator-max-microvolt = <987500>;
+		};
+
+		pm8994_l27: l27 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-boot-on;
+		};
+
+		pm8994_l28: l28 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-system-load = <10000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l29: l29 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-boot-on;
+		};
+
+		pm8994_l30: l30 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8994_l31: l31 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-system-load = <10000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l32: l32 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_lvs1: lvs1 {
+			regulator-boot-on;
+		};
+		pm8994_lvs2: lvs2 {
+			regulator-boot-on;
+		};
+	};
+};
+
+&sdhc1 {
+	/*
+	 * There is an issue with the eMMC causing permanent
+	 * damage to the card if a quirk isn't addressed.
+	 * Until it's fixed, disable the MMC so as not to brick
+	 * devices.
+	 */
+	status = "disabled";
+
+	/*
+	 * Downstream pushes 2.95V to the sdhci device,
+	 * but upstream driver REALLY wants to make vmmc 1.8v
+	 * cause of the hs400-1_8v mode. MMC works fine without
+	 * that regulator, so let's not use it for now.
+	 * vqmmc is also disabled cause driver stll complains.
+	 *
+	 * vmmc-supply = <&pm8994_l20>;
+	 * vqmmc-supply = <&pm8994_s4>;
+	 */
+};
+
+&sdhc2 {
+	status = "okay";
+
+	cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&pm8994_l21>;
+	vqmmc-supply = <&pm8994_l13>;
+};
+
+&tlmm {
+	ts_int_active: ts-int-active-state {
+		pins = "gpio42";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_reset_active: ts-reset-active-state {
+		pins = "gpio109";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+};