Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/arm64/qcom/msm8916-samsung-gt5-common.dtsi b/src/arm64/qcom/msm8916-samsung-gt5-common.dtsi
new file mode 100644
index 0000000..c19cf20
--- /dev/null
+++ b/src/arm64/qcom/msm8916-samsung-gt5-common.dtsi
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ aliases {
+ mmc0 = &sdhc_1; /* eMMC */
+ mmc1 = &sdhc_2; /* SD card */
+ serial0 = &blsp_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ reserved-memory {
+ /* Additional memory used by Samsung firmware modifications */
+ tz-apps@85500000 {
+ reg = <0x0 0x85500000 0x0 0xb00000>;
+ no-map;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_keys_default>;
+ pinctrl-names = "default";
+
+ label = "GPIO Buttons";
+
+ volume-up-button {
+ label = "Volume Up";
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ home-button {
+ label = "Home";
+ gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOMEPAGE>;
+ };
+ };
+
+ gpio-hall-sensor {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_hall_sensor_default>;
+ pinctrl-names = "default";
+
+ label = "GPIO Hall Effect Sensor";
+
+ hall-sensor-switch {
+ label = "Hall Effect Sensor";
+ gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ linux,can-disable;
+ };
+ };
+};
+
+&blsp_i2c4 {
+ status = "okay";
+
+ fuelgauge@36 {
+ compatible = "maxim,max77849-battery";
+ reg = <0x36>;
+
+ maxim,rsns-microohm = <10000>;
+ maxim,over-heat-temp = <600>;
+ maxim,over-volt = <4400>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-0 = <&fuelgauge_int_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&blsp_i2c2 {
+ status = "okay";
+
+ light-sensor@10 {
+ compatible = "capella,cm3323";
+ reg = <0x10>;
+ };
+
+ accelerometer@1d {
+ compatible = "st,lis2hh12";
+ reg = <0x1d>;
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l5>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
+
+ st,drdy-int-pin = <1>;
+ mount-matrix = "0", "1", "0",
+ "-1", "0", "0",
+ "0", "0", "1";
+
+ pinctrl-0 = <&accel_int_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&blsp_uart2 {
+ status = "okay";
+};
+
+&pm8916_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&pm8916_rpm_regulators {
+ pm8916_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+};
+
+/* FIXME: Replace with MAX77849 MUIC when driver is available */
+&pm8916_usbin {
+ status = "okay";
+};
+
+&sdhc_1 {
+ status = "okay";
+};
+
+&sdhc_2 {
+ pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+ pinctrl-names = "default", "sleep";
+
+ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&usb {
+ dr_mode = "peripheral";
+ extcon = <&pm8916_usbin>;
+
+ status = "okay";
+};
+
+&usb_hs_phy {
+ extcon = <&pm8916_usbin>;
+};
+
+&venus {
+ status = "okay";
+};
+
+&venus_mem {
+ status = "okay";
+};
+
+&wcnss {
+ status = "okay";
+};
+
+&wcnss_iris {
+ compatible = "qcom,wcn3660b";
+};
+
+&wcnss_mem {
+ status = "okay";
+};
+
+&tlmm {
+ accel_int_default: accel-int-default-state {
+ pins = "gpio115";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ fuelgauge_int_default: fuelgauge-int-default-state {
+ pins = "gpio121";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ gpio_keys_default: gpio-keys-default-state {
+ pins = "gpio107", "gpio109";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+ pins = "gpio52";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sdc2_cd_default: sdc2-cd-default-state {
+ pins = "gpio38";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};