Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/arm64/freescale/imx8mm-phyboard-polis-rdk.dts b/src/arm64/freescale/imx8mm-phyboard-polis-rdk.dts
new file mode 100644
index 0000000..92e62fe
--- /dev/null
+++ b/src/arm64/freescale/imx8mm-phyboard-polis-rdk.dts
@@ -0,0 +1,505 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mm-phycore-som.dtsi"
+
+/ {
+ model = "PHYTEC phyBOARD-Polis-i.MX8MM RDK";
+ compatible = "phytec,imx8mm-phyboard-polis-rdk",
+ "phytec,imx8mm-phycore-som", "fsl,imx8mm";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ bt_osc_32k: bt-lp-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "bt_osc_32k";
+ #clock-cells = <0>;
+ };
+
+ can_osc_40m: can-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <40000000>;
+ clock-output-names = "can_osc_40m";
+ #clock-cells = <0>;
+ };
+
+ fan {
+ compatible = "gpio-fan";
+ gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = <0 0
+ 13000 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fan>;
+ #cooling-cells = <2>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ led-0 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_DISK;
+ gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc2";
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_DISK;
+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc1";
+ };
+
+ led-2 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_CPU;
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ usdhc1_pwrseq: pwr-seq {
+ compatible = "mmc-pwrseq-simple";
+ post-power-on-delay-ms = <100>;
+ power-off-delay-us = <60>;
+ reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_can_en: regulator-can-en {
+ compatible = "regulator-fixed";
+ gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_en>;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "CAN_EN";
+ startup-delay-us = <20>;
+ };
+
+ reg_usb_otg1_vbus: regulator-usb-otg1 {
+ compatible = "regulator-fixed";
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1pwrgrp>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ off-on-delay-us = <20000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "VSD_3V3";
+ };
+
+ reg_vcc_3v3: regulator-vcc-3v3 {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "VCC_3V3";
+ };
+};
+
+/* SPI - CAN MCP251XFD */
+&ecspi1 {
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ can0: can@0 {
+ compatible = "microchip,mcp251xfd";
+ clocks = <&can_osc_40m>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_int>;
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ xceiver-supply = <®_can_en>;
+ };
+};
+
+/* TPM */
+&ecspi2 {
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ tpm: tpm@0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ interrupt-parent = <&gpio2>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tpm>;
+ reg = <0>;
+ spi-max-frequency = <43000000>;
+ };
+};
+
+&gpio1 {
+ gpio-line-names = "", "LED_RED", "WDOG_INT", "X_RTC_INT",
+ "", "", "", "RESET_ETHPHY",
+ "CAN_nINT", "CAN_EN", "nENABLE_FLATLINK", "",
+ "USB_OTG_VBUS_EN", "", "LED_GREEN", "LED_BLUE";
+};
+
+&gpio2 {
+ gpio-line-names = "", "", "", "",
+ "", "", "BT_REG_ON", "WL_REG_ON",
+ "BT_DEV_WAKE", "BT_HOST_WAKE", "", "",
+ "X_SD2_CD_B", "", "", "",
+ "", "", "", "SD2_RESET_B";
+};
+
+&gpio4 {
+ gpio-line-names = "", "", "", "",
+ "", "", "", "",
+ "FAN", "miniPCIe_nPERST", "", "",
+ "COEX1", "COEX2";
+};
+
+&gpio5 {
+ gpio-line-names = "", "", "", "",
+ "", "", "", "",
+ "", "ECSPI1_SS0";
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ pinctrl-1 = <&pinctrl_i2c4_gpio>;
+ sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+/* PCIe */
+&pcie0 {
+ assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&clk IMX8MM_CLK_PCIE1_CTRL>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+ <&clk IMX8MM_SYS_PLL2_250M>;
+ assigned-clock-rates = <10000000>, <250000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio4 9 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pcie_phy {
+ clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+ fsl,clkreq-unsupported;
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+ fsl,tx-deemph-gen1 = <0x2d>;
+ fsl,tx-deemph-gen2 = <0xf>;
+ status = "okay";
+};
+
+&rv3028 {
+ trickle-resistor-ohms = <3000>;
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
+/* UART - RS232/RS485 */
+&uart1 {
+ assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+/* UART - Sterling-LWB Bluetooth */
+&uart2 {
+ assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+ fsl,dte-mode;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_bt>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&bt_osc_32k>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+ interrupt-names = "host-wakeup";
+ interrupt-parent = <&gpio2>;
+ interrupts = <9 IRQ_TYPE_EDGE_BOTH>;
+ max-speed = <2000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_bt>;
+ shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+ vddio-supply = <®_vcc_3v3>;
+ };
+};
+
+/* UART - console */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+/* USB */
+&usbotg1 {
+ adp-disable;
+ dr_mode = "otg";
+ over-current-active-low;
+ samsung,picophy-pre-emp-curr-control = <3>;
+ samsung,picophy-dc-vol-level-adjust = <7>;
+ srp-disable;
+ vbus-supply = <®_usb_otg1_vbus>;
+ status = "okay";
+};
+
+&usbotg2 {
+ disable-over-current;
+ dr_mode = "host";
+ samsung,picophy-pre-emp-curr-control = <3>;
+ samsung,picophy-dc-vol-level-adjust = <7>;
+ status = "okay";
+};
+
+/* SDIO - Sterling-LWB Wifi */
+&usdhc1 {
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC1>;
+ assigned-clock-rates = <200000000>;
+ bus-width = <4>;
+ mmc-pwrseq = <&usdhc1_pwrseq>;
+ non-removable;
+ no-1-8-v;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_wlan>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ };
+};
+
+/* SD-Card */
+&usdhc2 {
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+ assigned-clock-rates = <200000000>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ vqmmc-supply = <®_nvcc_sd2>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_bt: btgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x00
+ MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x00
+ MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x00
+ >;
+ };
+
+ pinctrl_can_en: can-engrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x00
+ >;
+ };
+
+ pinctrl_can_int: can-intgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x00
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x80
+ MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x80
+ MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x80
+ MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x00
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x80
+ MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x80
+ MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x80
+ MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x00
+ >;
+ };
+
+ pinctrl_fan: fan0grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x16
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c2
+ MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c2
+ >;
+ };
+
+ pinctrl_i2c4_gpio: i2c4gpiogrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20 0x1e2
+ MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0x1e2
+ >;
+ };
+
+ pinctrl_leds: leds1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x16
+ MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x16
+ MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x16
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x00
+ MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x12
+ MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x12
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x40
+ >;
+ };
+
+ pinctrl_tpm: tpmgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x140
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x00
+ MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x00
+ MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x00
+ MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x00
+ >;
+ };
+
+ pinctrl_uart2_bt: uart2btgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B 0x00
+ MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B 0x00
+ MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX 0x00
+ MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX 0x00
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
+ MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_usbotg1pwrgrp: usbotg1pwrgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x00
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x182
+ MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0xc6
+ MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc6
+ MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc6
+ MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc6
+ MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc6
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x40
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x192
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d2
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d2
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d2
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d2
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d2
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
+ >;
+ };
+
+ pinctrl_wlan: wlangrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x00
+ >;
+ };
+};