Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/arm64/freescale/fsl-ls1012a-rdb.dts b/src/arm64/freescale/fsl-ls1012a-rdb.dts
new file mode 100644
index 0000000..e662677
--- /dev/null
+++ b/src/arm64/freescale/fsl-ls1012a-rdb.dts
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS1012A RDB Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ */
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "fsl-ls1012a.dtsi"
+
+/ {
+ model = "LS1012A RDB Board";
+ compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
+
+ aliases {
+ serial0 = &duart0;
+ mmc0 = &esdhc0;
+ mmc1 = &esdhc1;
+ };
+};
+
+&duart0 {
+ status = "okay";
+};
+
+&esdhc0 {
+ sd-uhs-sdr104;
+ sd-uhs-sdr50;
+ sd-uhs-sdr25;
+ sd-uhs-sdr12;
+ status = "okay";
+};
+
+&esdhc1 {
+ mmc-hs200-1_8v;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ accelerometer@1e {
+ compatible = "nxp,fxos8700";
+ reg = <0x1e>;
+ interrupt-parent = <&gpio26>;
+ interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "INT1";
+ };
+
+ gyroscope@20 {
+ compatible = "nxp,fxas21002c";
+ reg = <0x20>;
+ };
+
+ gpio@24 {
+ compatible = "nxp,pcal9555a";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@25 {
+ compatible = "nxp,pcal9555a";
+ reg = <0x25>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio26: gpio@26 {
+ compatible = "nxp,pcal9555a";
+ reg = <0x26>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ current-sensor@40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ };
+};
+
+&qspi {
+ status = "okay";
+
+ s25fs512s0: flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+ reg = <0>;
+ spi-rx-bus-width = <2>;
+ spi-tx-bus-width = <2>;
+ };
+};
+
+&sata {
+ status = "okay";
+};