Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/arm/st/spear1310.dtsi b/src/arm/st/spear1310.dtsi
new file mode 100644
index 0000000..ba827d6
--- /dev/null
+++ b/src/arm/st/spear1310.dtsi
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DTS file for all SPEAr1310 SoCs
+ *
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
+ */
+
+/include/ "spear13xx.dtsi"
+
+/ {
+ compatible = "st,spear1310";
+
+ ahb {
+ spics: spics@e0700000 {
+ compatible = "st,spear-spics-gpio";
+ reg = <0xe0700000 0x1000>;
+ st-spics,peripcfg-reg = <0x3b0>;
+ st-spics,sw-enable-bit = <12>;
+ st-spics,cs-value-bit = <11>;
+ st-spics,cs-enable-mask = <3>;
+ st-spics,cs-enable-shift = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ miphy0: miphy@eb800000 {
+ compatible = "st,spear1310-miphy";
+ reg = <0xeb800000 0x4000>;
+ misc = <&misc>;
+ phy-id = <0>;
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ miphy1: miphy@eb804000 {
+ compatible = "st,spear1310-miphy";
+ reg = <0xeb804000 0x4000>;
+ misc = <&misc>;
+ phy-id = <1>;
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ miphy2: miphy@eb808000 {
+ compatible = "st,spear1310-miphy";
+ reg = <0xeb808000 0x4000>;
+ misc = <&misc>;
+ phy-id = <2>;
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ ahci0: ahci@b1000000 {
+ compatible = "snps,spear-ahci";
+ reg = <0xb1000000 0x10000>;
+ interrupts = <0 68 0x4>;
+ phys = <&miphy0 0>;
+ phy-names = "sata-phy";
+ status = "disabled";
+ };
+
+ ahci1: ahci@b1800000 {
+ compatible = "snps,spear-ahci";
+ reg = <0xb1800000 0x10000>;
+ interrupts = <0 69 0x4>;
+ phys = <&miphy1 0>;
+ phy-names = "sata-phy";
+ status = "disabled";
+ };
+
+ ahci2: ahci@b4000000 {
+ compatible = "snps,spear-ahci";
+ reg = <0xb4000000 0x10000>;
+ interrupts = <0 70 0x4>;
+ phys = <&miphy2 0>;
+ phy-names = "sata-phy";
+ status = "disabled";
+ };
+
+ pcie0: pcie@b1000000 {
+ compatible = "st,spear1340-pcie", "snps,dw-pcie";
+ reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
+ reg-names = "dbi", "config";
+ interrupts = <0 68 0x4>;
+ num-lanes = <1>;
+ phys = <&miphy0 1>;
+ phy-names = "pcie-phy";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
+ bus-range = <0x00 0xff>;
+ status = "disabled";
+ };
+
+ pcie1: pcie@b1800000 {
+ compatible = "st,spear1340-pcie", "snps,dw-pcie";
+ reg = <0xb1800000 0x4000>, <0x90000000 0x20000>;
+ reg-names = "dbi", "config";
+ interrupts = <0 69 0x4>;
+ num-lanes = <1>;
+ phys = <&miphy1 1>;
+ phy-names = "pcie-phy";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x90020000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0x90030000 0x90030000 0 0x0ffd0000>; /* non-prefetchable memory */
+ bus-range = <0x00 0xff>;
+ status = "disabled";
+ };
+
+ pcie2: pcie@b4000000 {
+ compatible = "st,spear1340-pcie", "snps,dw-pcie";
+ reg = <0xb4000000 0x4000>, <0xc0000000 0x20000>;
+ reg-names = "dbi", "config";
+ interrupts = <0 70 0x4>;
+ num-lanes = <1>;
+ phys = <&miphy2 1>;
+ phy-names = "pcie-phy";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0xc0020000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0xc0030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
+ bus-range = <0x00 0xff>;
+ status = "disabled";
+ };
+
+ gmac1: eth@5c400000 {
+ compatible = "st,spear600-gmac";
+ reg = <0x5c400000 0x8000>;
+ interrupts = <0 95 0x4>;
+ interrupt-names = "macirq";
+ phy-mode = "mii";
+ status = "disabled";
+ };
+
+ gmac2: eth@5c500000 {
+ compatible = "st,spear600-gmac";
+ reg = <0x5c500000 0x8000>;
+ interrupts = <0 96 0x4>;
+ interrupt-names = "macirq";
+ phy-mode = "mii";
+ status = "disabled";
+ };
+
+ gmac3: eth@5c600000 {
+ compatible = "st,spear600-gmac";
+ reg = <0x5c600000 0x8000>;
+ interrupts = <0 97 0x4>;
+ interrupt-names = "macirq";
+ phy-mode = "rmii";
+ status = "disabled";
+ };
+
+ gmac4: eth@5c700000 {
+ compatible = "st,spear600-gmac";
+ reg = <0x5c700000 0x8000>;
+ interrupts = <0 98 0x4>;
+ interrupt-names = "macirq";
+ phy-mode = "rgmii";
+ status = "disabled";
+ };
+
+ pinmux: pinmux@e0700000 {
+ compatible = "st,spear1310-pinmux";
+ reg = <0xe0700000 0x1000>;
+ #gpio-range-cells = <3>;
+ };
+
+ apb {
+ i2c1: i2c@5cd00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0x5cd00000 0x1000>;
+ interrupts = <0 87 0x4>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@5ce00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0x5ce00000 0x1000>;
+ interrupts = <0 88 0x4>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@5cf00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0x5cf00000 0x1000>;
+ interrupts = <0 89 0x4>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@5d000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0x5d000000 0x1000>;
+ interrupts = <0 90 0x4>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@5d100000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0x5d100000 0x1000>;
+ interrupts = <0 91 0x4>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@5d200000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0x5d200000 0x1000>;
+ interrupts = <0 92 0x4>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@5d300000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0x5d300000 0x1000>;
+ interrupts = <0 93 0x4>;
+ status = "disabled";
+ };
+
+ spi1: spi@5d400000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x5d400000 0x1000>;
+ interrupts = <0 99 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ serial@5c800000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x5c800000 0x1000>;
+ interrupts = <0 82 0x4>;
+ status = "disabled";
+ };
+
+ serial@5c900000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x5c900000 0x1000>;
+ interrupts = <0 83 0x4>;
+ status = "disabled";
+ };
+
+ serial@5ca00000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x5ca00000 0x1000>;
+ interrupts = <0 84 0x4>;
+ status = "disabled";
+ };
+
+ serial@5cb00000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x5cb00000 0x1000>;
+ interrupts = <0 85 0x4>;
+ status = "disabled";
+ };
+
+ serial@5cc00000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x5cc00000 0x1000>;
+ interrupts = <0 86 0x4>;
+ status = "disabled";
+ };
+
+ thermal@e07008c4 {
+ st,thermal-flags = <0x7000>;
+ };
+
+ gpiopinctrl: gpio@d8400000 {
+ compatible = "st,spear-plgpio";
+ reg = <0xd8400000 0x1000>;
+ interrupts = <0 100 0x4>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinmux 0 0 246>;
+ status = "disabled";
+
+ st-plgpio,ngpio = <246>;
+ st-plgpio,enb-reg = <0xd0>;
+ st-plgpio,wdata-reg = <0x90>;
+ st-plgpio,dir-reg = <0xb0>;
+ st-plgpio,ie-reg = <0x30>;
+ st-plgpio,rdata-reg = <0x70>;
+ st-plgpio,mis-reg = <0x10>;
+ st-plgpio,eit-reg = <0x50>;
+ };
+ };
+ };
+};