Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/arm/qcom/qcom-sdx55.dtsi b/src/arm/qcom/qcom-sdx55.dtsi
new file mode 100644
index 0000000..2aa5089
--- /dev/null
+++ b/src/arm/qcom/qcom-sdx55.dtsi
@@ -0,0 +1,873 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SDX55 SoC device tree source
+ *
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020, Linaro Ltd.
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sdx55.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,sdx55.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ qcom,msm-id = <357 0x10000>, <368 0x10000>, <418 0x10000>;
+ interrupt-parent = <&intc>;
+
+ memory {
+ device_type = "memory";
+ reg = <0 0>;
+ };
+
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <38400000>;
+ clock-output-names = "xo_board";
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32000>;
+ };
+
+ nand_clk_dummy: nand-clk-dummy {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32000>;
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ enable-method = "psci";
+ clocks = <&apcs>;
+ power-domains = <&rpmhpd SDX55_CX>;
+ power-domain-names = "rpmhpd";
+ operating-points-v2 = <&cpu_opp_table>;
+ };
+ };
+
+ firmware {
+ scm {
+ compatible = "qcom,scm-sdx55", "qcom,scm";
+ };
+ };
+
+ cpu_opp_table: opp-table-cpu {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-345600000 {
+ opp-hz = /bits/ 64 <345600000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-576000000 {
+ opp-hz = /bits/ 64 <576000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-1094400000 {
+ opp-hz = /bits/ 64 <1094400000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+
+ opp-1555200000 {
+ opp-hz = /bits/ 64 <1555200000>;
+ required-opps = <&rpmhpd_opp_turbo>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ hyp_mem: memory@8fc00000 {
+ no-map;
+ reg = <0x8fc00000 0x80000>;
+ };
+
+ ac_db_mem: memory@8fc80000 {
+ no-map;
+ reg = <0x8fc80000 0x40000>;
+ };
+
+ secdata_mem: memory@8fcfd000 {
+ no-map;
+ reg = <0x8fcfd000 0x1000>;
+ };
+
+ sbl_mem: memory@8fd00000 {
+ no-map;
+ reg = <0x8fd00000 0x100000>;
+ };
+
+ aop_image: memory@8fe00000 {
+ no-map;
+ reg = <0x8fe00000 0x20000>;
+ };
+
+ aop_cmd_db: memory@8fe20000 {
+ compatible = "qcom,cmd-db";
+ reg = <0x8fe20000 0x20000>;
+ no-map;
+ };
+
+ smem_mem: memory@8fe40000 {
+ no-map;
+ reg = <0x8fe40000 0xc0000>;
+ };
+
+ tz_mem: memory@8ff00000 {
+ no-map;
+ reg = <0x8ff00000 0x100000>;
+ };
+
+ tz_apps_mem: memory@90000000 {
+ no-map;
+ reg = <0x90000000 0x500000>;
+ };
+ };
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ smp2p-mpss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apcs 14>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ ipa_smp2p_out: ipa-ap-to-modem {
+ qcom,entry-name = "ipa";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ ipa_smp2p_in: ipa-modem-to-ap {
+ qcom,entry-name = "ipa";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ soc: soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "simple-bus";
+
+ gcc: clock-controller@100000 {
+ compatible = "qcom,gcc-sdx55";
+ reg = <0x100000 0x1f0000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ clock-names = "bi_tcxo", "sleep_clk";
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+ };
+
+ blsp1_uart3: serial@831000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x00831000 0x200>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc 30>,
+ <&gcc 9>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ usb_hsphy: phy@ff4000 {
+ compatible = "qcom,sdx55-usb-hs-phy",
+ "qcom,usb-snps-hs-7nm-phy";
+ reg = <0x00ff4000 0x114>;
+ status = "disabled";
+ #phy-cells = <0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_BCR>;
+ };
+
+ usb_qmpphy: phy@ff6000 {
+ compatible = "qcom,sdx55-qmp-usb3-uni-phy";
+ reg = <0x00ff6000 0x1c0>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_USB3PHY_PHY_BCR>,
+ <&gcc GCC_USB3_PHY_BCR>;
+ reset-names = "phy", "common";
+
+ usb_ssphy: phy@ff6200 {
+ reg = <0x00ff6200 0x170>,
+ <0x00ff6400 0x200>,
+ <0x00ff6800 0x800>;
+ #phy-cells = <0>;
+ #clock-cells = <0>;
+ clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+ };
+ };
+
+ mc_virt: interconnect@1100000 {
+ compatible = "qcom,sdx55-mc-virt";
+ reg = <0x01100000 0x400000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mem_noc: interconnect@9680000 {
+ compatible = "qcom,sdx55-mem-noc";
+ reg = <0x09680000 0x40000>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ system_noc: interconnect@162c000 {
+ compatible = "qcom,sdx55-system-noc";
+ reg = <0x0162c000 0x31200>;
+ #interconnect-cells = <1>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ qpic_bam: dma-controller@1b04000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x01b04000 0x1c000>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rpmhcc RPMH_QPIC_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ qcom,controlled-remotely;
+ status = "disabled";
+ };
+
+ qpic_nand: nand-controller@1b30000 {
+ compatible = "qcom,sdx55-nand";
+ reg = <0x01b30000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&rpmhcc RPMH_QPIC_CLK>,
+ <&nand_clk_dummy>;
+ clock-names = "core", "aon";
+
+ dmas = <&qpic_bam 0>,
+ <&qpic_bam 1>,
+ <&qpic_bam 2>;
+ dma-names = "tx", "rx", "cmd";
+ status = "disabled";
+ };
+
+ pcie_rc: pcie@1c00000 {
+ compatible = "qcom,pcie-sdx55";
+ reg = <0x01c00000 0x3000>,
+ <0x40000000 0xf1d>,
+ <0x40000f20 0xc8>,
+ <0x40001000 0x1000>,
+ <0x40100000 0x100000>;
+ reg-names = "parf",
+ "dbi",
+ "elbi",
+ "atu",
+ "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x01000000 0x0 0x00000000 0x40200000 0x0 0x100000>,
+ <0x02000000 0x0 0x40300000 0x40300000 0x0 0x3fd00000>;
+
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7",
+ "msi8";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc GCC_PCIE_PIPE_CLK>,
+ <&gcc GCC_PCIE_AUX_CLK>,
+ <&gcc GCC_PCIE_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_PCIE_SLEEP_CLK>;
+ clock-names = "pipe",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "sleep";
+
+ assigned-clocks = <&gcc GCC_PCIE_AUX_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ iommu-map = <0x0 &apps_smmu 0x0200 0x1>,
+ <0x100 &apps_smmu 0x0201 0x1>,
+ <0x200 &apps_smmu 0x0202 0x1>,
+ <0x300 &apps_smmu 0x0203 0x1>,
+ <0x400 &apps_smmu 0x0204 0x1>;
+
+ resets = <&gcc GCC_PCIE_BCR>;
+ reset-names = "pci";
+
+ power-domains = <&gcc PCIE_GDSC>;
+
+ phys = <&pcie_phy>;
+ phy-names = "pciephy";
+
+ status = "disabled";
+ };
+
+ pcie_ep: pcie-ep@1c00000 {
+ compatible = "qcom,sdx55-pcie-ep";
+ reg = <0x01c00000 0x3000>,
+ <0x40000000 0xf1d>,
+ <0x40000f20 0xc8>,
+ <0x40001000 0x1000>,
+ <0x40200000 0x100000>,
+ <0x01c03000 0x3000>;
+ reg-names = "parf",
+ "dbi",
+ "elbi",
+ "atu",
+ "addr_space",
+ "mmio";
+
+ qcom,perst-regs = <&tcsr 0xb258 0xb270>;
+
+ clocks = <&gcc GCC_PCIE_AUX_CLK>,
+ <&gcc GCC_PCIE_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_PCIE_SLEEP_CLK>,
+ <&gcc GCC_PCIE_0_CLKREF_CLK>;
+ clock-names = "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "sleep",
+ "ref";
+
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global",
+ "doorbell";
+
+ interconnects = <&system_noc MASTER_PCIE &mc_virt SLAVE_EBI_CH0>;
+ interconnect-names = "pcie-mem";
+
+ resets = <&gcc GCC_PCIE_BCR>;
+ reset-names = "core";
+ power-domains = <&gcc PCIE_GDSC>;
+ phys = <&pcie_phy>;
+ phy-names = "pciephy";
+ max-link-speed = <3>;
+ num-lanes = <2>;
+
+ status = "disabled";
+ };
+
+ pcie_phy: phy@1c07000 {
+ compatible = "qcom,sdx55-qmp-pcie-phy";
+ reg = <0x01c07000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&gcc GCC_PCIE_AUX_PHY_CLK_SRC>,
+ <&gcc GCC_PCIE_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_CLKREF_CLK>,
+ <&gcc GCC_PCIE_RCHNG_PHY_CLK>,
+ <&gcc GCC_PCIE_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+
+ clock-output-names = "pcie_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
+
+ resets = <&gcc GCC_PCIE_PHY_BCR>;
+ reset-names = "phy";
+
+ assigned-clocks = <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ status = "disabled";
+ };
+
+ ipa: ipa@1e40000 {
+ compatible = "qcom,sdx55-ipa";
+
+ iommus = <&apps_smmu 0x5e0 0x0>,
+ <&apps_smmu 0x5e2 0x0>;
+ reg = <0x1e40000 0x7000>,
+ <0x1e50000 0x4b20>,
+ <0x1e04000 0x2c000>;
+ reg-names = "ipa-reg",
+ "ipa-shared",
+ "gsi";
+
+ interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+ <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ipa",
+ "gsi",
+ "ipa-clock-query",
+ "ipa-setup-ready";
+
+ clocks = <&rpmhcc RPMH_IPA_CLK>;
+ clock-names = "core";
+
+ interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI_CH0>,
+ <&system_noc MASTER_IPA &system_noc SLAVE_OCIMEM>,
+ <&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_IPA_CFG>;
+ interconnect-names = "memory",
+ "imem",
+ "config";
+
+ qcom,smem-states = <&ipa_smp2p_out 0>,
+ <&ipa_smp2p_out 1>;
+ qcom,smem-state-names = "ipa-clock-enabled-valid",
+ "ipa-clock-enabled";
+
+ status = "disabled";
+ };
+
+ tcsr_mutex: hwlock@1f40000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x01f40000 0x40000>;
+ #hwlock-cells = <1>;
+ };
+
+ tcsr: syscon@1fc0000 {
+ compatible = "qcom,sdx55-tcsr", "syscon";
+ reg = <0x01fc0000 0x1000>;
+ };
+
+ sdhc_1: mmc@8804000 {
+ compatible = "qcom,sdx55-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0x08804000 0x1000>;
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>;
+ clock-names = "iface", "core";
+ status = "disabled";
+ };
+
+ remoteproc_mpss: remoteproc@4080000 {
+ compatible = "qcom,sdx55-mpss-pas";
+ reg = <0x04080000 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover",
+ "stop-ack", "shutdown-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SDX55_CX>,
+ <&rpmhpd SDX55_MSS>;
+ power-domain-names = "cx", "mss";
+
+ qcom,smem-states = <&modem_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>;
+ label = "mpss";
+ qcom,remote-pid = <1>;
+ mboxes = <&apcs 15>;
+ };
+ };
+
+ usb: usb@a6f8800 {
+ compatible = "qcom,sdx55-dwc3", "qcom,dwc3";
+ reg = <0x0a6f8800 0x400>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>,
+ <&gcc GCC_USB30_MSTR_AXI_CLK>,
+ <&gcc GCC_USB30_SLEEP_CLK>,
+ <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi";
+
+ assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq", "ss_phy_irq",
+ "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+ power-domains = <&gcc USB30_GDSC>;
+
+ resets = <&gcc GCC_USB30_BCR>;
+
+ usb_dwc3: usb@a600000 {
+ compatible = "snps,dwc3";
+ reg = <0x0a600000 0xcd00>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x1a0 0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ phys = <&usb_hsphy>, <&usb_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ pdc: interrupt-controller@b210000 {
+ compatible = "qcom,sdx55-pdc", "qcom,pdc";
+ reg = <0x0b210000 0x30000>;
+ qcom,pdc-ranges = <0 179 52>;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ };
+
+ restart@c264000 {
+ compatible = "qcom,pshold";
+ reg = <0x0c264000 0x1000>;
+ };
+
+ spmi_bus: spmi@c440000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x0c440000 0x0000d00>,
+ <0x0c600000 0x2000000>,
+ <0x0e600000 0x0100000>,
+ <0x0e700000 0x00a0000>,
+ <0x0c40a000 0x0000700>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
+
+ tlmm: pinctrl@f100000 {
+ compatible = "qcom,sdx55-pinctrl";
+ reg = <0xf100000 0x300000>;
+ interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 108>;
+ };
+
+ sram@1468f000 {
+ compatible = "qcom,sdx55-imem", "syscon", "simple-mfd";
+ reg = <0x1468f000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x0 0x1468f000 0x1000>;
+
+ pil-reloc@94c {
+ compatible = "qcom,pil-reloc-info";
+ reg = <0x94c 0x200>;
+ };
+ };
+
+ apps_smmu: iommu@15000000 {
+ compatible = "qcom,sdx55-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+ reg = <0x15000000 0x20000>;
+ #iommu-cells = <2>;
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ intc: interrupt-controller@17800000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ interrupt-parent = <&intc>;
+ #interrupt-cells = <3>;
+ reg = <0x17800000 0x1000>,
+ <0x17802000 0x1000>;
+ };
+
+ a7pll: clock@17808000 {
+ compatible = "qcom,sdx55-a7pll";
+ reg = <0x17808000 0x1000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "bi_tcxo";
+ #clock-cells = <0>;
+ };
+
+ apcs: mailbox@17810000 {
+ compatible = "qcom,sdx55-apcs-gcc", "syscon";
+ reg = <0x17810000 0x2000>;
+ #mbox-cells = <1>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>;
+ clock-names = "ref", "pll", "aux";
+ #clock-cells = <0>;
+ };
+
+ watchdog@17817000 {
+ compatible = "qcom,apss-wdt-sdx55", "qcom,kpss-wdt";
+ reg = <0x17817000 0x1000>;
+ clocks = <&sleep_clk>;
+ };
+
+ timer@17820000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x17820000 0x1000>;
+ clock-frequency = <19200000>;
+
+ frame@17821000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 7 0x4>,
+ <GIC_SPI 6 0x4>;
+ reg = <0x17821000 0x1000>,
+ <0x17822000 0x1000>;
+ };
+
+ frame@17823000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 8 0x4>;
+ reg = <0x17823000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17824000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 9 0x4>;
+ reg = <0x17824000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17825000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 10 0x4>;
+ reg = <0x17825000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17826000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 11 0x4>;
+ reg = <0x17826000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17827000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 12 0x4>;
+ reg = <0x17827000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17828000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 13 0x4>;
+ reg = <0x17828000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17829000 {
+ frame-number = <7>;
+ interrupts = <GIC_SPI 14 0x4>;
+ reg = <0x17829000 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ apps_rsc: rsc@17830000 {
+ compatible = "qcom,rpmh-rsc";
+ reg = <0x17830000 0x10000>, <0x17840000 0x10000>;
+ reg-names = "drv-0", "drv-1";
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,tcs-offset = <0xd00>;
+ qcom,drv-id = <1>;
+ qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 2>,
+ <WAKE_TCS 2>, <CONTROL_TCS 1>;
+
+ rpmhcc: clock-controller {
+ compatible = "qcom,sdx55-rpmh-clk";
+ #clock-cells = <1>;
+ clock-names = "xo";
+ clocks = <&xo_board>;
+ };
+
+ rpmhpd: power-controller {
+ compatible = "qcom,sdx55-rpmhpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmhpd_opp_table>;
+
+ rpmhpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmhpd_opp_ret: opp1 {
+ opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+ };
+
+ rpmhpd_opp_min_svs: opp2 {
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
+
+ rpmhpd_opp_low_svs: opp3 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ rpmhpd_opp_svs: opp4 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ rpmhpd_opp_svs_l1: opp5 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ rpmhpd_opp_nom: opp6 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ rpmhpd_opp_nom_l1: opp7 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+
+ rpmhpd_opp_nom_l2: opp8 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+ };
+
+ rpmhpd_opp_turbo: opp9 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ };
+
+ rpmhpd_opp_turbo_l1: opp10 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ };
+ };
+ };
+
+ apps_bcm_voter: bcm-voter {
+ compatible = "qcom,bcm-voter";
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <19200000>;
+ };
+};