Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/arm/qcom/qcom-ipq8064-v1.0.dtsi b/src/arm/qcom/qcom-ipq8064-v1.0.dtsi
new file mode 100644
index 0000000..49de975
--- /dev/null
+++ b/src/arm/qcom/qcom-ipq8064-v1.0.dtsi
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-ipq8064.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ8064-v1.0";
+
+ aliases {
+ serial0 = &gsbi4_serial;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&buttons_pins>;
+ pinctrl-names = "default";
+
+ button-1 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ debounce-interval = <60>;
+ };
+ button-2 {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&leds_pins>;
+ pinctrl-names = "default";
+
+ led-0 {
+ label = "led_usb1";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "usbdev";
+ default-state = "off";
+ };
+
+ led-1 {
+ label = "led_usb3";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "usbdev";
+ default-state = "off";
+ };
+
+ led-2 {
+ label = "status_led_fail";
+ function = LED_FUNCTION_STATUS;
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-3 {
+ label = "sata_led";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-4 {
+ label = "status_led_pass";
+ function = LED_FUNCTION_STATUS;
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ soc {
+ gsbi@16300000 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "okay";
+
+ serial@16340000 {
+ status = "okay";
+ };
+ };
+
+ gsbi5: gsbi@1a200000 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "okay";
+
+ spi4: spi@1a280000 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 0>;
+
+ flash: flash@0 {
+ compatible = "s25fl256s1";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partition@0 {
+ label = "rootfs";
+ reg = <0x0 0x1000000>;
+ };
+
+ partition@1 {
+ label = "scratch";
+ reg = <0x1000000 0x1000000>;
+ };
+ };
+ };
+ };
+
+ sata-phy@1b400000 {
+ status = "okay";
+ };
+
+ sata@29000000 {
+ ports-implemented = <0x1>;
+ status = "okay";
+ };
+ };
+};