Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/arm/nxp/vf/vf-colibri-eval-v3.dtsi b/src/arm/nxp/vf/vf-colibri-eval-v3.dtsi
new file mode 100644
index 0000000..14c411f
--- /dev/null
+++ b/src/arm/nxp/vf/vf-colibri-eval-v3.dtsi
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ */
+
+/ {
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ clk16m: clk16m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <16000000>;
+ };
+
+ panel: panel {
+ compatible = "edt,et057090dhu";
+ backlight = <&bl>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dcu_out>;
+ };
+ };
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_usbh_vbus: regulator-usbh-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1_reg>;
+ regulator-name = "VCC_USB[1-4]";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; /* USBH_PEN resp. USBH_P_EN */
+ vin-supply = <®_5v0>;
+ };
+};
+
+&bl {
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ power-supply = <®_3v3>;
+ status = "okay";
+};
+
+&dcu0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dcu0_1>;
+ status = "okay";
+
+ port {
+ dcu_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
+
+&dspi1 {
+ status = "okay";
+
+ mcp2515can: can@0 {
+ compatible = "microchip,mcp2515";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_int>;
+ reg = <0>;
+ clocks = <&clk16m>;
+ spi-max-frequency = <10000000>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <11 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&fec1 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ /* M41T0M6 real time clock on carrier board */
+ rtc: rtc@68 {
+ compatible = "st,m41t0";
+ reg = <0x68>;
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+®_module_3v3 {
+ vin-supply = <®_3v3>;
+};
+
+&tcon0 {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usbh_vbus>;
+};
+
+&iomuxc {
+ vf610-colibri {
+ pinctrl_can_int: can_int {
+ fsl,pins = <
+ VF610_PAD_PTB21__GPIO_43 0x22ed
+ >;
+ };
+ };
+};
diff --git a/src/arm/nxp/vf/vf-colibri.dtsi b/src/arm/nxp/vf/vf-colibri.dtsi
new file mode 100644
index 0000000..cc1e069
--- /dev/null
+++ b/src/arm/nxp/vf/vf-colibri.dtsi
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ *
+ */
+
+/ {
+ aliases {
+ ethernet0 = &fec1;
+ ethernet1 = &fec0;
+ };
+
+ bl: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_bl_on>;
+ pwms = <&pwm0 0 5000000 0>;
+ enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+
+ reg_module_3v3: regulator-module-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_module_3v3_avdd: regulator-module-3v3-avdd {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AVDD_AUDIO";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&adc0 {
+ status = "okay";
+ vref-supply = <®_module_3v3_avdd>;
+};
+
+&adc1 {
+ status = "okay";
+ vref-supply = <®_module_3v3_avdd>;
+};
+
+&can0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan0>;
+ status = "disabled";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "disabled";
+};
+
+&clks {
+ assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
+ <&clks VF610_CLK_ENET_TS_SEL>;
+ assigned-clock-parents = <&clks VF610_CLK_ENET_50M>,
+ <&clks VF610_CLK_ENET_50M>;
+};
+
+&dspi1 {
+ bus-num = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dspi1>;
+};
+
+&edma0 {
+ status = "okay";
+};
+
+&edma1 {
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ disable-wp;
+};
+
+&fec1 {
+ phy-mode = "rmii";
+ phy-supply = <®_module_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nfc>;
+ status = "okay";
+
+ nand@0 {
+ compatible = "fsl,vf610-nfc-nandcs";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <32>;
+ nand-ecc-step-size = <2048>;
+ nand-on-flash-bbt;
+ };
+};
+
+&pwm0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0>;
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&usbdev0 {
+ disable-over-current;
+ status = "okay";
+};
+
+&usbh1 {
+ disable-over-current;
+ status = "okay";
+};
+
+&usbmisc0 {
+ status = "okay";
+};
+
+&usbmisc1 {
+ status = "okay";
+};
+
+&usbphy0 {
+ status = "okay";
+};
+
+&usbphy1 {
+ status = "okay";
+};
+
+&iomuxc {
+ vf610-colibri {
+ pinctrl_flexcan0: can0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__CAN0_RX 0x31F1
+ VF610_PAD_PTB15__CAN0_TX 0x31F2
+ >;
+ };
+
+ pinctrl_flexcan1: can1grp {
+ fsl,pins = <
+ VF610_PAD_PTB16__CAN1_RX 0x31F1
+ VF610_PAD_PTB17__CAN1_TX 0x31F2
+ >;
+ };
+
+ pinctrl_gpio_ext: gpio_ext {
+ fsl,pins = <
+ VF610_PAD_PTD10__GPIO_89 0x22ed /* EXT_IO_0 */
+ VF610_PAD_PTD9__GPIO_88 0x22ed /* EXT_IO_1 */
+ VF610_PAD_PTD26__GPIO_68 0x22ed /* EXT_IO_2 */
+ >;
+ };
+
+ pinctrl_dcu0_1: dcu0grp_1 {
+ fsl,pins = <
+ VF610_PAD_PTE0__DCU0_HSYNC 0x1902
+ VF610_PAD_PTE1__DCU0_VSYNC 0x1902
+ VF610_PAD_PTE2__DCU0_PCLK 0x1902
+ VF610_PAD_PTE4__DCU0_DE 0x1902
+ VF610_PAD_PTE5__DCU0_R0 0x1902
+ VF610_PAD_PTE6__DCU0_R1 0x1902
+ VF610_PAD_PTE7__DCU0_R2 0x1902
+ VF610_PAD_PTE8__DCU0_R3 0x1902
+ VF610_PAD_PTE9__DCU0_R4 0x1902
+ VF610_PAD_PTE10__DCU0_R5 0x1902
+ VF610_PAD_PTE11__DCU0_R6 0x1902
+ VF610_PAD_PTE12__DCU0_R7 0x1902
+ VF610_PAD_PTE13__DCU0_G0 0x1902
+ VF610_PAD_PTE14__DCU0_G1 0x1902
+ VF610_PAD_PTE15__DCU0_G2 0x1902
+ VF610_PAD_PTE16__DCU0_G3 0x1902
+ VF610_PAD_PTE17__DCU0_G4 0x1902
+ VF610_PAD_PTE18__DCU0_G5 0x1902
+ VF610_PAD_PTE19__DCU0_G6 0x1902
+ VF610_PAD_PTE20__DCU0_G7 0x1902
+ VF610_PAD_PTE21__DCU0_B0 0x1902
+ VF610_PAD_PTE22__DCU0_B1 0x1902
+ VF610_PAD_PTE23__DCU0_B2 0x1902
+ VF610_PAD_PTE24__DCU0_B3 0x1902
+ VF610_PAD_PTE25__DCU0_B4 0x1902
+ VF610_PAD_PTE26__DCU0_B5 0x1902
+ VF610_PAD_PTE27__DCU0_B6 0x1902
+ VF610_PAD_PTE28__DCU0_B7 0x1902
+ >;
+ };
+
+ pinctrl_dspi1: dspi1grp {
+ fsl,pins = <
+ VF610_PAD_PTD5__DSPI1_CS0 0x33e2
+ VF610_PAD_PTD6__DSPI1_SIN 0x33e1
+ VF610_PAD_PTD7__DSPI1_SOUT 0x33e2
+ VF610_PAD_PTD8__DSPI1_SCK 0x33e2
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ VF610_PAD_PTB20__GPIO_42 0x219d
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTA6__RMII_CLKOUT 0x30d2
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_gpio_bl_on: gpio_bl_on {
+ fsl,pins = <
+ VF610_PAD_PTC0__GPIO_45 0x22ef
+ >;
+ };
+
+ pinctrl_i2c0: i2c0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__I2C0_SCL 0x37ff
+ VF610_PAD_PTB15__I2C0_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_i2c0_gpio: i2c0gpiogrp {
+ fsl,pins = <
+ VF610_PAD_PTB14__GPIO_36 0x37ff
+ VF610_PAD_PTB15__GPIO_37 0x37ff
+ >;
+ };
+
+ pinctrl_nfc: nfcgrp {
+ fsl,pins = <
+ VF610_PAD_PTD23__NF_IO7 0x28df
+ VF610_PAD_PTD22__NF_IO6 0x28df
+ VF610_PAD_PTD21__NF_IO5 0x28df
+ VF610_PAD_PTD20__NF_IO4 0x28df
+ VF610_PAD_PTD19__NF_IO3 0x28df
+ VF610_PAD_PTD18__NF_IO2 0x28df
+ VF610_PAD_PTD17__NF_IO1 0x28df
+ VF610_PAD_PTD16__NF_IO0 0x28df
+ VF610_PAD_PTB24__NF_WE_B 0x28c2
+ VF610_PAD_PTB25__NF_CE0_B 0x28c2
+ VF610_PAD_PTB27__NF_RE_B 0x28c2
+ VF610_PAD_PTC26__NF_RB_B 0x283d
+ VF610_PAD_PTC27__NF_ALE 0x28c2
+ VF610_PAD_PTC28__NF_CLE 0x28c2
+ >;
+ };
+
+ pinctrl_pwm0: pwm0grp {
+ fsl,pins = <
+ VF610_PAD_PTB0__FTM0_CH0 0x1182
+ VF610_PAD_PTB1__FTM0_CH1 0x1182
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ VF610_PAD_PTB8__FTM1_CH0 0x1182
+ VF610_PAD_PTB9__FTM1_CH1 0x1182
+ >;
+ };
+
+ pinctrl_uart0: uart0grp {
+ fsl,pins = <
+ VF610_PAD_PTB10__UART0_TX 0x21a2
+ VF610_PAD_PTB11__UART0_RX 0x21a1
+ VF610_PAD_PTB12__UART0_RTS 0x21a2
+ VF610_PAD_PTB13__UART0_CTS 0x21a1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ VF610_PAD_PTB4__UART1_TX 0x21a2
+ VF610_PAD_PTB5__UART1_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ VF610_PAD_PTD0__UART2_TX 0x21a2
+ VF610_PAD_PTD1__UART2_RX 0x21a1
+ VF610_PAD_PTD2__UART2_RTS 0x21a2
+ VF610_PAD_PTD3__UART2_CTS 0x21a1
+ >;
+ };
+
+ pinctrl_usbh1_reg: gpio_usb_vbus {
+ fsl,pins = <
+ VF610_PAD_PTD4__GPIO_83 0x22ed
+ >;
+ };
+ };
+};
diff --git a/src/arm/nxp/vf/vf500-colibri-eval-v3.dts b/src/arm/nxp/vf/vf500-colibri-eval-v3.dts
new file mode 100644
index 0000000..088964f
--- /dev/null
+++ b/src/arm/nxp/vf/vf500-colibri-eval-v3.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ */
+
+/dts-v1/;
+#include "vf500-colibri.dtsi"
+#include "vf-colibri-eval-v3.dtsi"
+
+/ {
+ model = "Toradex Colibri VF50 on Colibri Evaluation Board";
+ compatible = "toradex,vf500-colibri_vf50-on-eval", "toradex,vf500-colibri_vf50", "fsl,vf500";
+};
+
+&touchscreen {
+ vf50-ts-min-pressure = <200>;
+ status = "okay";
+};
diff --git a/src/arm/nxp/vf/vf500-colibri.dtsi b/src/arm/nxp/vf/vf500-colibri.dtsi
new file mode 100644
index 0000000..8af7ed5
--- /dev/null
+++ b/src/arm/nxp/vf/vf500-colibri.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ */
+
+#include "vf500.dtsi"
+#include "vf-colibri.dtsi"
+
+/ {
+ model = "Toradex Colibri VF50 COM";
+ compatible = "toradex,vf500-colibri_vf50", "fsl,vf500";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x8000000>;
+ };
+
+ touchscreen: vf50-touchscreen {
+ compatible = "toradex,vf50-touchscreen";
+ io-channels = <&adc1 0>,<&adc0 0>,
+ <&adc0 1>,<&adc1 2>;
+ xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+ yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "idle","default","gpios";
+ pinctrl-0 = <&pinctrl_touchctrl_idle>;
+ pinctrl-1 = <&pinctrl_touchctrl_default>;
+ pinctrl-2 = <&pinctrl_touchctrl_gpios>;
+ vf50-ts-min-pressure = <200>;
+ status = "disabled";
+ };
+};
+
+&nfc {
+ assigned-clocks = <&clks VF610_CLK_NFC>;
+ assigned-clock-rates = <33000000>;
+};
+
+&iomuxc {
+ vf610-colibri {
+ pinctrl_touchctrl_idle: touchctrl_idle {
+ fsl,pins = <
+ VF610_PAD_PTA18__GPIO_8 0x006d
+ VF610_PAD_PTA19__GPIO_9 0x006c
+ >;
+ };
+
+ pinctrl_touchctrl_default: touchctrl_default {
+ fsl,pins = <
+ VF610_PAD_PTA18__ADC0_SE0 0x0040
+ VF610_PAD_PTA19__ADC0_SE1 0x0040
+ VF610_PAD_PTA16__ADC1_SE0 0x0040
+ VF610_PAD_PTB2__ADC1_SE2 0x0040
+ >;
+ };
+
+ pinctrl_touchctrl_gpios: touchctrl_gpios {
+ fsl,pins = <
+ VF610_PAD_PTA23__GPIO_13 0x22e9
+ VF610_PAD_PTB23__GPIO_93 0x22e9
+ VF610_PAD_PTA22__GPIO_12 0x22e9
+ VF610_PAD_PTA11__GPIO_4 0x22e9
+ >;
+ };
+ };
+};
diff --git a/src/arm/nxp/vf/vf500.dtsi b/src/arm/nxp/vf/vf500.dtsi
new file mode 100644
index 0000000..0c0dd44
--- /dev/null
+++ b/src/arm/nxp/vf/vf500.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+#include "vfxxx.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chosen { };
+ aliases { };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ a5_cpu: cpu@0 {
+ compatible = "arm,cortex-a5";
+ device_type = "cpu";
+ reg = <0x0>;
+ };
+ };
+
+ soc {
+ bus@40000000 {
+
+ intc: interrupt-controller@40003000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupt-parent = <&intc>;
+ reg = <0x40003000 0x1000>,
+ <0x40002100 0x100>;
+ };
+
+ global_timer: timer@40002200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x40002200 0x20>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+ interrupt-parent = <&intc>;
+ clocks = <&clks VF610_CLK_PLATFORM_BUS>;
+ };
+ };
+
+ bus@40080000 {
+ pmu@40089000 {
+ compatible = "arm,cortex-a5-pmu";
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a5_cpu>;
+ reg = <0x40089000 0x1000>;
+ };
+ };
+
+ };
+};
+
+&mscm_ir {
+ interrupt-parent = <&intc>;
+};
+
+&wdoga5 {
+ status = "okay";
+};
diff --git a/src/arm/nxp/vf/vf610-bk4.dts b/src/arm/nxp/vf/vf610-bk4.dts
new file mode 100644
index 0000000..e4f691d
--- /dev/null
+++ b/src/arm/nxp/vf/vf610-bk4.dts
@@ -0,0 +1,537 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+ model = "Liebherr BK4 controller";
+ compatible = "lwn,bk4", "fsl,vf610";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x8000000>;
+ };
+
+ audio_ext: oscillator-audio {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ enet_ext: oscillator-ethernet {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ /* LED D5 */
+ led0: led-heartbeat {
+ label = "heartbeat";
+ gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vcc_3v3_mcu: regulator-vcc3v3mcu {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3_mcu";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ spi {
+ compatible = "spi-gpio";
+ pinctrl-0 = <&pinctrl_gpio_spi>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* PTD12 ->RPIO[91] */
+ sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+ /* PTD10 ->RPIO[89] */
+ miso-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <0>;
+
+ gpio@0 {
+ compatible = "pisosr-gpio";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* PTB18 -> RGPIO[40] */
+ load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ spi-max-frequency = <100000>;
+ };
+ };
+};
+
+&adc0 {
+ vref-supply = <®_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&adc1 {
+ vref-supply = <®_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&can0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can0>;
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ status = "okay";
+};
+
+&clks {
+ clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>;
+ clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext";
+};
+
+&dspi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dspi0>;
+ bus-num = <0>;
+ status = "okay";
+
+ spidev0@0 {
+ compatible = "lwn,bk4";
+ spi-max-frequency = <30000000>;
+ reg = <0>;
+ fsl,spi-cs-sck-delay = <200>;
+ fsl,spi-sck-cs-delay = <400>;
+ };
+};
+
+&dspi3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dspi3>;
+ bus-num = <3>;
+ status = "okay";
+ spi-slave;
+ #address-cells = <0>;
+
+ slave {
+ compatible = "lwn,bk4";
+ spi-max-frequency = <30000000>;
+ };
+};
+
+&edma0 {
+ status = "okay";
+};
+
+&edma1 {
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&fec0 {
+ phy-mode = "rmii";
+ phy-handle = <ðphy0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec0>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@1 {
+ reg = <1>;
+ clocks = <&clks VF610_CLK_ENET_50M>;
+ clock-names = "rmii-ref";
+ };
+ };
+};
+
+&fec1 {
+ phy-mode = "rmii";
+ phy-handle = <ðphy1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ clocks = <&clks VF610_CLK_ENET_50M>;
+ clock-names = "rmii-ref";
+ };
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ at24c256: eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+
+ m41t62: rtc@68 {
+ compatible = "st,m41t62";
+ reg = <0x68>;
+ };
+};
+
+&nfc {
+ assigned-clocks = <&clks VF610_CLK_NFC>;
+ assigned-clock-rates = <33000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nfc>;
+ status = "okay";
+
+ nand@0 {
+ compatible = "fsl,vf610-nfc-nandcs";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nand-bus-width = <16>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <2048>;
+ nand-on-flash-bbt;
+ };
+};
+
+&qspi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi0>;
+ status = "okay";
+
+ n25q128a13_4: flash@0 {
+ compatible = "n25q128a13", "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <66000000>;
+ spi-rx-bus-width = <4>;
+ reg = <0>;
+ };
+
+ n25q128a13_2: flash@2 {
+ compatible = "n25q128a13", "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <66000000>;
+ spi-rx-bus-width = <2>;
+ reg = <2>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ /delete-property/dma-names;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ /delete-property/dma-names;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ /delete-property/dma-names;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ /delete-property/dma-names;
+ status = "okay";
+};
+
+&usbdev0 {
+ disable-over-current;
+ status = "okay";
+};
+
+&usbh1 {
+ disable-over-current;
+ status = "okay";
+};
+
+&usbmisc0 {
+ status = "okay";
+};
+
+&usbmisc1 {
+ status = "okay";
+};
+
+&usbphy0 {
+ status = "okay";
+};
+
+&usbphy1 {
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* One_Wire_PSU_EN */
+ VF610_PAD_PTC29__GPIO_102 0x1183
+ /* SPI ENABLE */
+ VF610_PAD_PTB26__GPIO_96 0x1183
+ /* EB control */
+ VF610_PAD_PTE14__GPIO_119 0x1183
+ VF610_PAD_PTE4__GPIO_109 0x1181
+ /* Feedback_Lines */
+ VF610_PAD_PTC31__GPIO_104 0x1181
+ VF610_PAD_PTA7__GPIO_134 0x1181
+ VF610_PAD_PTD9__GPIO_88 0x1181
+ VF610_PAD_PTE1__GPIO_106 0x1183
+ VF610_PAD_PTB2__GPIO_24 0x1181
+ VF610_PAD_PTB3__GPIO_25 0x1181
+ VF610_PAD_PTB1__GPIO_23 0x1181
+ /* SDHC Enable */
+ VF610_PAD_PTE19__GPIO_124 0x1183
+ /* SDHC Overcurrent */
+ VF610_PAD_PTB23__GPIO_93 0x1181
+ /* GPI */
+ VF610_PAD_PTE2__GPIO_107 0x1181
+ VF610_PAD_PTE3__GPIO_108 0x1181
+ VF610_PAD_PTE5__GPIO_110 0x1181
+ VF610_PAD_PTE6__GPIO_111 0x1181
+ /* GPO */
+ VF610_PAD_PTE0__GPIO_105 0x1183
+ VF610_PAD_PTE7__GPIO_112 0x1183
+ /* RS485 Control */
+ VF610_PAD_PTB8__GPIO_30 0x1183
+ VF610_PAD_PTB9__GPIO_31 0x1183
+ VF610_PAD_PTE8__GPIO_113 0x1183
+ /* MPBUS MPB_EN */
+ VF610_PAD_PTE28__GPIO_133 0x1183
+ /* MISC */
+ VF610_PAD_PTE10__GPIO_115 0x1183
+ VF610_PAD_PTE11__GPIO_116 0x1183
+ VF610_PAD_PTE17__GPIO_122 0x1183
+ VF610_PAD_PTC30__GPIO_103 0x1183
+ VF610_PAD_PTB0__GPIO_22 0x1181
+ /* RESETINFO */
+ VF610_PAD_PTE26__GPIO_131 0x1183
+ VF610_PAD_PTD6__GPIO_85 0x1181
+ VF610_PAD_PTE27__GPIO_132 0x1181
+ VF610_PAD_PTE13__GPIO_118 0x1181
+ VF610_PAD_PTE21__GPIO_126 0x1181
+ VF610_PAD_PTE22__GPIO_127 0x1181
+ /* EE_5V_EN */
+ VF610_PAD_PTE18__GPIO_123 0x1183
+ /* EE_5V_OC_N */
+ VF610_PAD_PTE25__GPIO_130 0x1181
+ >;
+ };
+
+ pinctrl_can0: can0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__CAN0_RX 0x1181
+ VF610_PAD_PTB15__CAN0_TX 0x1182
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ VF610_PAD_PTB16__CAN1_RX 0x1181
+ VF610_PAD_PTB17__CAN1_TX 0x1182
+ >;
+ };
+
+ pinctrl_dspi0: dspi0grp {
+ fsl,pins = <
+ VF610_PAD_PTB18__DSPI0_CS1 0x1182
+ VF610_PAD_PTB19__DSPI0_CS0 0x1182
+ VF610_PAD_PTB20__DSPI0_SIN 0x1181
+ VF610_PAD_PTB21__DSPI0_SOUT 0x1182
+ VF610_PAD_PTB22__DSPI0_SCK 0x1182
+ >;
+ };
+
+ pinctrl_dspi3: dspi3grp {
+ fsl,pins = <
+ VF610_PAD_PTD10__DSPI3_CS0 0x1181
+ VF610_PAD_PTD11__DSPI3_SIN 0x1181
+ VF610_PAD_PTD12__DSPI3_SOUT 0x1182
+ VF610_PAD_PTD13__DSPI3_SCK 0x1181
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ VF610_PAD_PTB28__GPIO_98 0x219d
+ >;
+ };
+
+ pinctrl_fec0: fec0grp {
+ fsl,pins = <
+ VF610_PAD_PTA6__RMII_CLKIN 0x30dd
+ VF610_PAD_PTC0__ENET_RMII0_MDC 0x30de
+ VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30df
+ VF610_PAD_PTC2__ENET_RMII0_CRS 0x30dd
+ VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30dd
+ VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30dd
+ VF610_PAD_PTC5__ENET_RMII0_RXER 0x30dd
+ VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30de
+ VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30de
+ VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30de
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30de
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30df
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30dd
+ VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30dd
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30dd
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30dd
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30de
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30de
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30de
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ /* Heart bit LED */
+ VF610_PAD_PTE12__GPIO_117 0x1183
+ /* LEDS */
+ VF610_PAD_PTE15__GPIO_120 0x1183
+ VF610_PAD_PTA12__GPIO_5 0x1183
+ VF610_PAD_PTA16__GPIO_6 0x1183
+ VF610_PAD_PTE9__GPIO_114 0x1183
+ VF610_PAD_PTE20__GPIO_125 0x1183
+ VF610_PAD_PTE23__GPIO_128 0x1183
+ VF610_PAD_PTE16__GPIO_121 0x1183
+ >;
+ };
+
+ pinctrl_gpio_spi: pinctrl-gpio-spi {
+ fsl,pins = <
+ VF610_PAD_PTB18__GPIO_40 0x1183
+ VF610_PAD_PTD10__GPIO_89 0x1183
+ VF610_PAD_PTD12__GPIO_91 0x1183
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ VF610_PAD_PTA22__I2C2_SCL 0x34df
+ VF610_PAD_PTA23__I2C2_SDA 0x34df
+ >;
+ };
+
+ pinctrl_nfc: nfcgrp {
+ fsl,pins = <
+ VF610_PAD_PTD23__NF_IO7 0x28df
+ VF610_PAD_PTD22__NF_IO6 0x28df
+ VF610_PAD_PTD21__NF_IO5 0x28df
+ VF610_PAD_PTD20__NF_IO4 0x28df
+ VF610_PAD_PTD19__NF_IO3 0x28df
+ VF610_PAD_PTD18__NF_IO2 0x28df
+ VF610_PAD_PTD17__NF_IO1 0x28df
+ VF610_PAD_PTD16__NF_IO0 0x28df
+ VF610_PAD_PTB24__NF_WE_B 0x28c2
+ VF610_PAD_PTB25__NF_CE0_B 0x28c2
+ VF610_PAD_PTB27__NF_RE_B 0x28c2
+ VF610_PAD_PTC26__NF_RB_B 0x283d
+ VF610_PAD_PTC27__NF_ALE 0x28c2
+ VF610_PAD_PTC28__NF_CLE 0x28c2
+ >;
+ };
+
+ pinctrl_qspi0: qspi0grp {
+ fsl,pins = <
+ VF610_PAD_PTD0__QSPI0_A_QSCK 0x397f
+ VF610_PAD_PTD1__QSPI0_A_CS0 0x397f
+ VF610_PAD_PTD2__QSPI0_A_DATA3 0x397f
+ VF610_PAD_PTD3__QSPI0_A_DATA2 0x397f
+ VF610_PAD_PTD4__QSPI0_A_DATA1 0x397f
+ VF610_PAD_PTD5__QSPI0_A_DATA0 0x397f
+ VF610_PAD_PTD7__QSPI0_B_QSCK 0x397f
+ VF610_PAD_PTD8__QSPI0_B_CS0 0x397f
+ VF610_PAD_PTD11__QSPI0_B_DATA1 0x397f
+ VF610_PAD_PTD12__QSPI0_B_DATA0 0x397f
+ >;
+ };
+
+ pinctrl_uart0: uart0grp {
+ fsl,pins = <
+ VF610_PAD_PTB10__UART0_TX 0x21a2
+ VF610_PAD_PTB11__UART0_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ VF610_PAD_PTB4__UART1_TX 0x21a2
+ VF610_PAD_PTB5__UART1_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ VF610_PAD_PTB6__UART2_TX 0x21a2
+ VF610_PAD_PTB7__UART2_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ VF610_PAD_PTA20__UART3_TX 0x21a2
+ VF610_PAD_PTA21__UART3_RX 0x21a1
+ >;
+ };
+};
diff --git a/src/arm/nxp/vf/vf610-colibri-eval-v3.dts b/src/arm/nxp/vf/vf610-colibri-eval-v3.dts
new file mode 100644
index 0000000..fb661e8
--- /dev/null
+++ b/src/arm/nxp/vf/vf610-colibri-eval-v3.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ */
+
+/dts-v1/;
+#include "vf610-colibri.dtsi"
+#include "vf-colibri-eval-v3.dtsi"
+
+/ {
+ model = "Toradex Colibri VF61 on Colibri Evaluation Board";
+ compatible = "toradex,vf610-colibri_vf61-on-eval", "toradex,vf610-colibri_vf61", "fsl,vf610";
+};
diff --git a/src/arm/nxp/vf/vf610-colibri.dtsi b/src/arm/nxp/vf/vf610-colibri.dtsi
new file mode 100644
index 0000000..607cec2
--- /dev/null
+++ b/src/arm/nxp/vf/vf610-colibri.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ */
+
+#include "vf610.dtsi"
+#include "vf-colibri.dtsi"
+
+/ {
+ model = "Toradex Colibri VF61 COM";
+ compatible = "toradex,vf610-colibri_vf61", "fsl,vf610";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>;
+ };
+};
+
+&nfc {
+ assigned-clocks = <&clks VF610_CLK_NFC>;
+ assigned-clock-rates = <50000000>;
+};
diff --git a/src/arm/nxp/vf/vf610-cosmic.dts b/src/arm/nxp/vf/vf610-cosmic.dts
new file mode 100644
index 0000000..703f375
--- /dev/null
+++ b/src/arm/nxp/vf/vf610-cosmic.dts
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2013 Linaro Limited
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+ model = "PHYTEC Cosmic/Cosmic+ Board";
+ compatible = "phytec,vf610-cosmic", "fsl,vf610";
+
+ chosen {
+ bootargs = "console=ttyLP1,115200";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>;
+ };
+
+ enet_ext: enet_ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+};
+
+&clks {
+ clocks = <&sxosc>, <&fxosc>, <&enet_ext>;
+ clock-names = "sxosc", "fxosc", "enet_ext";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&fec1 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ status = "okay";
+};
+
+&iomuxc {
+ vf610-cosmic {
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ VF610_PAD_PTB28__GPIO_98 0x219d
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ VF610_PAD_PTB4__UART1_TX 0x21a2
+ VF610_PAD_PTB5__UART1_RX 0x21a1
+ >;
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
diff --git a/src/arm/nxp/vf/vf610-pinfunc.h b/src/arm/nxp/vf/vf610-pinfunc.h
new file mode 100644
index 0000000..b7b7322
--- /dev/null
+++ b/src/arm/nxp/vf/vf610-pinfunc.h
@@ -0,0 +1,856 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_VF610_PINFUNC_H
+#define __DTS_VF610_PINFUNC_H
+
+/*
+ * The pin function ID for VF610 is a tuple of:
+ * <mux_reg input_reg mux_mode input_val>
+ */
+
+#define ALT0 0x0
+#define ALT1 0x1
+#define ALT2 0x2
+#define ALT3 0x3
+#define ALT4 0x4
+#define ALT5 0x5
+#define ALT6 0x6
+#define ALT7 0x7
+
+
+#define VF610_PAD_PTA6__GPIO_0 0x000 0x000 ALT0 0x0
+#define VF610_PAD_PTA6__RMII_CLKOUT 0x000 0x000 ALT1 0x0
+#define VF610_PAD_PTA6__RMII_CLKIN 0x000 0x2F0 ALT2 0x0
+#define VF610_PAD_PTA6__DCU1_TCON11 0x000 0x000 ALT4 0x0
+#define VF610_PAD_PTA6__DCU1_R2 0x000 0x000 ALT7 0x0
+#define VF610_PAD_PTA8__GPIO_1 0x004 0x000 ALT0 0x0
+#define VF610_PAD_PTA8__TCLK 0x004 0x000 ALT1 0x0
+#define VF610_PAD_PTA8__DCU0_R0 0x004 0x000 ALT4 0x0
+#define VF610_PAD_PTA8__MLB_CLK 0x004 0x354 ALT7 0x0
+#define VF610_PAD_PTA9__GPIO_2 0x008 0x000 ALT0 0x0
+#define VF610_PAD_PTA9__TDI 0x008 0x000 ALT1 0x0
+#define VF610_PAD_PTA9__RMII_CLKOUT 0x008 0x000 ALT2 0x0
+#define VF610_PAD_PTA9__RMII_CLKIN 0x008 0x2F0 ALT3 0x1
+#define VF610_PAD_PTA9__DCU0_R1 0x008 0x000 ALT4 0x0
+#define VF610_PAD_PTA9__WDOG_B 0x008 0x000 ALT6 0x0
+#define VF610_PAD_PTA10__GPIO_3 0x00C 0x000 ALT0 0x0
+#define VF610_PAD_PTA10__TDO 0x00C 0x000 ALT1 0x0
+#define VF610_PAD_PTA10__EXT_AUDIO_MCLK 0x00C 0x2EC ALT2 0x0
+#define VF610_PAD_PTA10__DCU0_G0 0x00C 0x000 ALT4 0x0
+#define VF610_PAD_PTA10__ENET_TS_CLKIN 0x00C 0x2F4 ALT6 0x0
+#define VF610_PAD_PTA10__MLB_SIGNAL 0x00C 0x35C ALT7 0x0
+#define VF610_PAD_PTA11__GPIO_4 0x010 0x000 ALT0 0x0
+#define VF610_PAD_PTA11__TMS 0x010 0x000 ALT1 0x0
+#define VF610_PAD_PTA11__DCU0_G1 0x010 0x000 ALT4 0x0
+#define VF610_PAD_PTA11__MLB_DATA 0x010 0x358 ALT7 0x0
+#define VF610_PAD_PTA12__GPIO_5 0x014 0x000 ALT0 0x0
+#define VF610_PAD_PTA12__TRACECK 0x014 0x000 ALT1 0x0
+#define VF610_PAD_PTA12__EXT_AUDIO_MCLK 0x014 0x2EC ALT2 0x1
+#define VF610_PAD_PTA12__VIU_DATA13 0x014 0x000 ALT6 0x0
+#define VF610_PAD_PTA12__I2C0_SCL 0x014 0x33C ALT7 0x0
+#define VF610_PAD_PTA16__GPIO_6 0x018 0x000 ALT0 0x0
+#define VF610_PAD_PTA16__TRACED0 0x018 0x000 ALT1 0x0
+#define VF610_PAD_PTA16__USB0_VBUS_EN 0x018 0x000 ALT2 0x0
+#define VF610_PAD_PTA16__ADC1_SE0 0x018 0x000 ALT3 0x0
+#define VF610_PAD_PTA16__LCD29 0x018 0x000 ALT4 0x0
+#define VF610_PAD_PTA16__SAI2_TX_BCLK 0x018 0x370 ALT5 0x0
+#define VF610_PAD_PTA16__VIU_DATA14 0x018 0x000 ALT6 0x0
+#define VF610_PAD_PTA16__I2C0_SDA 0x018 0x340 ALT7 0x0
+#define VF610_PAD_PTA17__GPIO_7 0x01C 0x000 ALT0 0x0
+#define VF610_PAD_PTA17__TRACED1 0x01C 0x000 ALT1 0x0
+#define VF610_PAD_PTA17__USB0_VBUS_OC 0x01C 0x000 ALT2 0x0
+#define VF610_PAD_PTA17__ADC1_SE1 0x01C 0x000 ALT3 0x0
+#define VF610_PAD_PTA17__LCD30 0x01C 0x000 ALT4 0x0
+#define VF610_PAD_PTA17__USB0_SOF_PULSE 0x01C 0x000 ALT5 0x0
+#define VF610_PAD_PTA17__VIU_DATA15 0x01C 0x000 ALT6 0x0
+#define VF610_PAD_PTA17__I2C1_SCL 0x01C 0x344 ALT7 0x0
+#define VF610_PAD_PTA18__GPIO_8 0x020 0x000 ALT0 0x0
+#define VF610_PAD_PTA18__TRACED2 0x020 0x000 ALT1 0x0
+#define VF610_PAD_PTA18__ADC0_SE0 0x020 0x000 ALT2 0x0
+#define VF610_PAD_PTA18__FTM1_QD_PHA 0x020 0x334 ALT3 0x0
+#define VF610_PAD_PTA18__LCD31 0x020 0x000 ALT4 0x0
+#define VF610_PAD_PTA18__SAI2_TX_DATA 0x020 0x000 ALT5 0x0
+#define VF610_PAD_PTA18__VIU_DATA16 0x020 0x000 ALT6 0x0
+#define VF610_PAD_PTA18__I2C1_SDA 0x020 0x348 ALT7 0x0
+#define VF610_PAD_PTA19__GPIO_9 0x024 0x000 ALT0 0x0
+#define VF610_PAD_PTA19__TRACED3 0x024 0x000 ALT1 0x0
+#define VF610_PAD_PTA19__ADC0_SE1 0x024 0x000 ALT2 0x0
+#define VF610_PAD_PTA19__FTM1_QD_PHB 0x024 0x338 ALT3 0x0
+#define VF610_PAD_PTA19__LCD32 0x024 0x000 ALT4 0x0
+#define VF610_PAD_PTA19__SAI2_TX_SYNC 0x024 0x000 ALT5 0x0
+#define VF610_PAD_PTA19__VIU_DATA17 0x024 0x000 ALT6 0x0
+#define VF610_PAD_PTA19__QSPI1_A_QSCK 0x024 0x374 ALT7 0x0
+#define VF610_PAD_PTA20__GPIO_10 0x028 0x000 ALT0 0x0
+#define VF610_PAD_PTA20__TRACED4 0x028 0x000 ALT1 0x0
+#define VF610_PAD_PTA20__LCD33 0x028 0x000 ALT4 0x0
+#define VF610_PAD_PTA20__UART3_TX 0x028 0x394 ALT6 0x0
+#define VF610_PAD_PTA20__DCU1_HSYNC 0x028 0x000 ALT7 0x0
+#define VF610_PAD_PTA21__GPIO_11 0x02C 0x000 ALT0 0x0
+#define VF610_PAD_PTA21__TRACED5 0x02C 0x000 ALT1 0x0
+#define VF610_PAD_PTA21__SAI2_RX_BCLK 0x02C 0x364 ALT5 0x0
+#define VF610_PAD_PTA21__UART3_RX 0x02C 0x390 ALT6 0x0
+#define VF610_PAD_PTA21__DCU1_VSYNC 0x02C 0x000 ALT7 0x0
+#define VF610_PAD_PTA22__GPIO_12 0x030 0x000 ALT0 0x0
+#define VF610_PAD_PTA22__TRACED6 0x030 0x000 ALT1 0x0
+#define VF610_PAD_PTA22__SAI2_RX_DATA 0x030 0x368 ALT5 0x0
+#define VF610_PAD_PTA22__I2C2_SCL 0x030 0x34C ALT6 0x0
+#define VF610_PAD_PTA22__DCU1_TAG 0x030 0x000 ALT7 0x0
+#define VF610_PAD_PTA23__GPIO_13 0x034 0x000 ALT0 0x0
+#define VF610_PAD_PTA23__TRACED7 0x034 0x000 ALT1 0x0
+#define VF610_PAD_PTA23__SAI2_RX_SYNC 0x034 0x36C ALT5 0x0
+#define VF610_PAD_PTA23__I2C2_SDA 0x034 0x350 ALT6 0x0
+#define VF610_PAD_PTA23__DCU1_DE 0x034 0x000 ALT7 0x0
+#define VF610_PAD_PTA24__GPIO_14 0x038 0x000 ALT0 0x0
+#define VF610_PAD_PTA24__TRACED8 0x038 0x000 ALT1 0x0
+#define VF610_PAD_PTA24__USB1_VBUS_EN 0x038 0x000 ALT2 0x0
+#define VF610_PAD_PTA24__ESDHC1_CLK 0x038 0x000 ALT5 0x0
+#define VF610_PAD_PTA24__DCU1_TCON4 0x038 0x000 ALT6 0x0
+#define VF610_PAD_PTA24__DDR_TEST_PAD_CTRL 0x038 0x000 ALT7 0x0
+#define VF610_PAD_PTA25__GPIO_15 0x03C 0x000 ALT0 0x0
+#define VF610_PAD_PTA25__TRACED9 0x03C 0x000 ALT1 0x0
+#define VF610_PAD_PTA25__USB1_VBUS_OC 0x03C 0x000 ALT2 0x0
+#define VF610_PAD_PTA25__ESDHC1_CMD 0x03C 0x000 ALT5 0x0
+#define VF610_PAD_PTA25__DCU1_TCON5 0x03C 0x000 ALT6 0x0
+#define VF610_PAD_PTA26__GPIO_16 0x040 0x000 ALT0 0x0
+#define VF610_PAD_PTA26__TRACED10 0x040 0x000 ALT1 0x0
+#define VF610_PAD_PTA26__SAI3_TX_BCLK 0x040 0x000 ALT2 0x0
+#define VF610_PAD_PTA26__ESDHC1_DAT0 0x040 0x000 ALT5 0x0
+#define VF610_PAD_PTA26__DCU1_TCON6 0x040 0x000 ALT6 0x0
+#define VF610_PAD_PTA27__GPIO_17 0x044 0x000 ALT0 0x0
+#define VF610_PAD_PTA27__TRACED11 0x044 0x000 ALT1 0x0
+#define VF610_PAD_PTA27__SAI3_RX_BCLK 0x044 0x000 ALT2 0x0
+#define VF610_PAD_PTA27__ESDHC1_DAT1 0x044 0x000 ALT5 0x0
+#define VF610_PAD_PTA27__DCU1_TCON7 0x044 0x000 ALT6 0x0
+#define VF610_PAD_PTA28__GPIO_18 0x048 0x000 ALT0 0x0
+#define VF610_PAD_PTA28__TRACED12 0x048 0x000 ALT1 0x0
+#define VF610_PAD_PTA28__SAI3_RX_DATA 0x048 0x000 ALT2 0x0
+#define VF610_PAD_PTA28__ENET1_1588_TMR0 0x048 0x000 ALT3 0x0
+#define VF610_PAD_PTA28__UART4_TX 0x048 0x000 ALT4 0x0
+#define VF610_PAD_PTA28__ESDHC1_DATA2 0x048 0x000 ALT5 0x0
+#define VF610_PAD_PTA28__DCU1_TCON8 0x048 0x000 ALT6 0x0
+#define VF610_PAD_PTA29__GPIO_19 0x04C 0x000 ALT0 0x0
+#define VF610_PAD_PTA29__TRACED13 0x04C 0x000 ALT1 0x0
+#define VF610_PAD_PTA29__SAI3_TX_DATA 0x04C 0x000 ALT2 0x0
+#define VF610_PAD_PTA29__ENET1_1588_TMR1 0x04C 0x000 ALT3 0x0
+#define VF610_PAD_PTA29__UART4_RX 0x04C 0x000 ALT4 0x0
+#define VF610_PAD_PTA29__ESDHC1_DAT3 0x04C 0x000 ALT5 0x0
+#define VF610_PAD_PTA29__DCU1_TCON9 0x04C 0x000 ALT6 0x0
+#define VF610_PAD_PTA30__GPIO_20 0x050 0x000 ALT0 0x0
+#define VF610_PAD_PTA30__TRACED14 0x050 0x000 ALT1 0x0
+#define VF610_PAD_PTA30__SAI3_RX_SYNC 0x050 0x000 ALT2 0x0
+#define VF610_PAD_PTA30__ENET1_1588_TMR2 0x050 0x000 ALT3 0x0
+#define VF610_PAD_PTA30__UART4_RTS 0x050 0x000 ALT4 0x0
+#define VF610_PAD_PTA30__I2C3_SCL 0x050 0x000 ALT5 0x0
+#define VF610_PAD_PTA30__UART3_TX 0x050 0x394 ALT7 0x1
+#define VF610_PAD_PTA31__GPIO_21 0x054 0x000 ALT0 0x0
+#define VF610_PAD_PTA31__TRACED15 0x054 0x000 ALT1 0x0
+#define VF610_PAD_PTA31__SAI3_TX_SYNC 0x054 0x000 ALT2 0x0
+#define VF610_PAD_PTA31__ENET1_1588_TMR3 0x054 0x000 ALT3 0x0
+#define VF610_PAD_PTA31__UART4_CTS 0x054 0x000 ALT4 0x0
+#define VF610_PAD_PTA31__I2C3_SDA 0x054 0x000 ALT5 0x0
+#define VF610_PAD_PTA31__UART3_RX 0x054 0x390 ALT7 0x1
+#define VF610_PAD_PTB0__GPIO_22 0x058 0x000 ALT0 0x0
+#define VF610_PAD_PTB0__FTM0_CH0 0x058 0x000 ALT1 0x0
+#define VF610_PAD_PTB0__ADC0_SE2 0x058 0x000 ALT2 0x0
+#define VF610_PAD_PTB0__TRACE_CTL 0x058 0x000 ALT3 0x0
+#define VF610_PAD_PTB0__LCD34 0x058 0x000 ALT4 0x0
+#define VF610_PAD_PTB0__SAI2_RX_BCLK 0x058 0x364 ALT5 0x1
+#define VF610_PAD_PTB0__VIU_DATA18 0x058 0x000 ALT6 0x0
+#define VF610_PAD_PTB0__QSPI1_A_QPCS0 0x058 0x000 ALT7 0x0
+#define VF610_PAD_PTB1__GPIO_23 0x05C 0x000 ALT0 0x0
+#define VF610_PAD_PTB1__FTM0_CH1 0x05C 0x000 ALT1 0x0
+#define VF610_PAD_PTB1__ADC0_SE3 0x05C 0x000 ALT2 0x0
+#define VF610_PAD_PTB1__SRC_RCON30 0x05C 0x000 ALT3 0x0
+#define VF610_PAD_PTB1__LCD35 0x05C 0x000 ALT4 0x0
+#define VF610_PAD_PTB1__SAI2_RX_DATA 0x05C 0x368 ALT5 0x1
+#define VF610_PAD_PTB1__VIU_DATA19 0x05C 0x000 ALT6 0x0
+#define VF610_PAD_PTB1__QSPI1_A_DATA3 0x05C 0x000 ALT7 0x0
+#define VF610_PAD_PTB2__GPIO_24 0x060 0x000 ALT0 0x0
+#define VF610_PAD_PTB2__FTM0_CH2 0x060 0x000 ALT1 0x0
+#define VF610_PAD_PTB2__ADC1_SE2 0x060 0x000 ALT2 0x0
+#define VF610_PAD_PTB2__SRC_RCON31 0x060 0x000 ALT3 0x0
+#define VF610_PAD_PTB2__LCD36 0x060 0x000 ALT4 0x0
+#define VF610_PAD_PTB2__SAI2_RX_SYNC 0x060 0x36C ALT5 0x1
+#define VF610_PAD_PTB2__VIDEO_IN0_DATA20 0x060 0x000 ALT6 0x0
+#define VF610_PAD_PTB2__QSPI1_A_DATA2 0x060 0x000 ALT7 0x0
+#define VF610_PAD_PTB3__GPIO_25 0x064 0x000 ALT0 0x0
+#define VF610_PAD_PTB3__FTM0_CH3 0x064 0x000 ALT1 0x0
+#define VF610_PAD_PTB3__ADC1_SE3 0x064 0x000 ALT2 0x0
+#define VF610_PAD_PTB3__PDB_EXTRIG 0x064 0x000 ALT3 0x0
+#define VF610_PAD_PTB3__LCD37 0x064 0x000 ALT4 0x0
+#define VF610_PAD_PTB3__VIU_DATA21 0x064 0x000 ALT6 0x0
+#define VF610_PAD_PTB3__QSPI1_A_DATA1 0x064 0x000 ALT7 0x0
+#define VF610_PAD_PTB4__GPIO_26 0x068 0x000 ALT0 0x0
+#define VF610_PAD_PTB4__FTM0_CH4 0x068 0x000 ALT1 0x0
+#define VF610_PAD_PTB4__UART1_TX 0x068 0x380 ALT2 0x0
+#define VF610_PAD_PTB4__ADC0_SE4 0x068 0x000 ALT3 0x0
+#define VF610_PAD_PTB4__LCD38 0x068 0x000 ALT4 0x0
+#define VF610_PAD_PTB4__VIU_FID 0x068 0x3A8 ALT5 0x0
+#define VF610_PAD_PTB4__VIU_DATA22 0x068 0x000 ALT6 0x0
+#define VF610_PAD_PTB4__QSPI1_A_DATA0 0x068 0x000 ALT7 0x0
+#define VF610_PAD_PTB5__GPIO_27 0x06C 0x000 ALT0 0x0
+#define VF610_PAD_PTB5__FTM0_CH5 0x06C 0x000 ALT1 0x0
+#define VF610_PAD_PTB5__UART1_RX 0x06C 0x37C ALT2 0x0
+#define VF610_PAD_PTB5__ADC1_SE4 0x06C 0x000 ALT3 0x0
+#define VF610_PAD_PTB5__LCD39 0x06C 0x000 ALT4 0x0
+#define VF610_PAD_PTB5__VIU_DE 0x06C 0x3A4 ALT5 0x0
+#define VF610_PAD_PTB5__QSPI1_A_DQS 0x06C 0x000 ALT7 0x0
+#define VF610_PAD_PTB6__GPIO_28 0x070 0x000 ALT0 0x0
+#define VF610_PAD_PTB6__FTM0_CH6 0x070 0x000 ALT1 0x0
+#define VF610_PAD_PTB6__UART1_RTS 0x070 0x000 ALT2 0x0
+#define VF610_PAD_PTB6__QSPI0_QPCS1_A 0x070 0x000 ALT3 0x0
+#define VF610_PAD_PTB6__LCD_LCD40 0x070 0x000 ALT4 0x0
+#define VF610_PAD_PTB6__FB_CLKOUT 0x070 0x000 ALT5 0x0
+#define VF610_PAD_PTB6__VIU_HSYNC 0x070 0x000 ALT6 0x0
+#define VF610_PAD_PTB6__UART2_TX 0x070 0x38C ALT7 0x0
+#define VF610_PAD_PTB7__GPIO_29 0x074 0x000 ALT0 0x0
+#define VF610_PAD_PTB7__FTM0_CH7 0x074 0x000 ALT1 0x0
+#define VF610_PAD_PTB7__UART1_CTS 0x074 0x378 ALT2 0x0
+#define VF610_PAD_PTB7__QSPI0_B_QPCS1 0x074 0x000 ALT3 0x0
+#define VF610_PAD_PTB7__LCD41 0x074 0x000 ALT4 0x0
+#define VF610_PAD_PTB7__VIU_VSYNC 0x074 0x000 ALT6 0x0
+#define VF610_PAD_PTB7__UART2_RX 0x074 0x388 ALT7 0x0
+#define VF610_PAD_PTB8__GPIO_30 0x078 0x000 ALT0 0x0
+#define VF610_PAD_PTB8__FTM1_CH0 0x078 0x32C ALT1 0x0
+#define VF610_PAD_PTB8__FTM1_QD_PHA 0x078 0x334 ALT3 0x1
+#define VF610_PAD_PTB8__VIU_DE 0x078 0x3A4 ALT5 0x1
+#define VF610_PAD_PTB8__DCU1_R6 0x078 0x000 ALT7 0x0
+#define VF610_PAD_PTB9__GPIO_31 0x07C 0x000 ALT0 0x0
+#define VF610_PAD_PTB9__FTM1_CH1 0x07C 0x330 ALT1 0x0
+#define VF610_PAD_PTB9__FTM1_QD_PHB 0x07C 0x338 ALT3 0x1
+#define VF610_PAD_PTB9__DCU1_R7 0x07C 0x000 ALT7 0x0
+#define VF610_PAD_PTB10__GPIO_32 0x080 0x000 ALT0 0x0
+#define VF610_PAD_PTB10__UART0_TX 0x080 0x000 ALT1 0x0
+#define VF610_PAD_PTB10__DCU0_TCON4 0x080 0x000 ALT4 0x0
+#define VF610_PAD_PTB10__VIU_DE 0x080 0x3A4 ALT5 0x2
+#define VF610_PAD_PTB10__CKO1 0x080 0x000 ALT6 0x0
+#define VF610_PAD_PTB10__ENET_TS_CLKIN 0x080 0x2F4 ALT7 0x1
+#define VF610_PAD_PTB11__GPIO_33 0x084 0x000 ALT0 0x0
+#define VF610_PAD_PTB11__UART0_RX 0x084 0x000 ALT1 0x0
+#define VF610_PAD_PTB11__DCU0_TCON5 0x084 0x000 ALT4 0x0
+#define VF610_PAD_PTB11__SNVS_ALARM_OUT_B 0x084 0x000 ALT5 0x0
+#define VF610_PAD_PTB11__CKO2 0x084 0x000 ALT6 0x0
+#define VF610_PAD_PTB11_ENET0_1588_TMR0 0x084 0x304 ALT7 0x0
+#define VF610_PAD_PTB12__GPIO_34 0x088 0x000 ALT0 0x0
+#define VF610_PAD_PTB12__UART0_RTS 0x088 0x000 ALT1 0x0
+#define VF610_PAD_PTB12__DSPI0_CS5 0x088 0x000 ALT3 0x0
+#define VF610_PAD_PTB12__DCU0_TCON6 0x088 0x000 ALT4 0x0
+#define VF610_PAD_PTB12__FB_AD1 0x088 0x000 ALT5 0x0
+#define VF610_PAD_PTB12__NMI 0x088 0x000 ALT6 0x0
+#define VF610_PAD_PTB12__ENET0_1588_TMR1 0x088 0x308 ALT7 0x0
+#define VF610_PAD_PTB13__GPIO_35 0x08C 0x000 ALT0 0x0
+#define VF610_PAD_PTB13__UART0_CTS 0x08C 0x000 ALT1 0x0
+#define VF610_PAD_PTB13__DSPI0_CS4 0x08C 0x000 ALT3 0x0
+#define VF610_PAD_PTB13__DCU0_TCON7 0x08C 0x000 ALT4 0x0
+#define VF610_PAD_PTB13__FB_AD0 0x08C 0x000 ALT5 0x0
+#define VF610_PAD_PTB13__TRACE_CTL 0x08C 0x000 ALT6 0x0
+#define VF610_PAD_PTB14__GPIO_36 0x090 0x000 ALT0 0x0
+#define VF610_PAD_PTB14__CAN0_RX 0x090 0x000 ALT1 0x0
+#define VF610_PAD_PTB14__I2C0_SCL 0x090 0x33C ALT2 0x1
+#define VF610_PAD_PTB14__DCU0_TCON8 0x090 0x000 ALT4 0x0
+#define VF610_PAD_PTB14__DCU1_PCLK 0x090 0x000 ALT7 0x0
+#define VF610_PAD_PTB15__GPIO_37 0x094 0x000 ALT0 0x0
+#define VF610_PAD_PTB15__CAN0_TX 0x094 0x000 ALT1 0x0
+#define VF610_PAD_PTB15__I2C0_SDA 0x094 0x340 ALT2 0x1
+#define VF610_PAD_PTB15__DCU0_TCON9 0x094 0x000 ALT4 0x0
+#define VF610_PAD_PTB15__VIU_PIX_CLK 0x094 0x3AC ALT7 0x0
+#define VF610_PAD_PTB16__GPIO_38 0x098 0x000 ALT0 0x0
+#define VF610_PAD_PTB16__CAN1_RX 0x098 0x000 ALT1 0x0
+#define VF610_PAD_PTB16__I2C1_SCL 0x098 0x344 ALT2 0x1
+#define VF610_PAD_PTB16__DCU0_TCON10 0x098 0x000 ALT4 0x0
+#define VF610_PAD_PTB17__GPIO_39 0x09C 0x000 ALT0 0x0
+#define VF610_PAD_PTB17__CAN1_TX 0x09C 0x000 ALT1 0x0
+#define VF610_PAD_PTB17__I2C1_SDA 0x09C 0x348 ALT2 0x1
+#define VF610_PAD_PTB17__DCU0_TCON11 0x09C 0x000 ALT4 0x0
+#define VF610_PAD_PTB18__GPIO_40 0x0A0 0x000 ALT0 0x0
+#define VF610_PAD_PTB18__DSPI0_CS1 0x0A0 0x000 ALT1 0x0
+#define VF610_PAD_PTB18__EXT_AUDIO_MCLK 0x0A0 0x2EC ALT2 0x2
+#define VF610_PAD_PTB18__VIU_DATA9 0x0A0 0x000 ALT6 0x0
+#define VF610_PAD_PTB19__GPIO_41 0x0A4 0x000 ALT0 0x0
+#define VF610_PAD_PTB19__DSPI0_CS0 0x0A4 0x000 ALT1 0x0
+#define VF610_PAD_PTB19__VIU_DATA10 0x0A4 0x000 ALT6 0x0
+#define VF610_PAD_PTB20__GPIO_42 0x0A8 0x000 ALT0 0x0
+#define VF610_PAD_PTB20__DSPI0_SIN 0x0A8 0x000 ALT1 0x0
+#define VF610_PAD_PTB20__LCD42 0x0A8 0x000 ALT4 0x0
+#define VF610_PAD_PTB20__VIU_DATA11 0x0A8 0x000 ALT6 0x0
+#define VF610_PAD_PTB21__GPIO_43 0x0AC 0x000 ALT0 0x0
+#define VF610_PAD_PTB21__DSPI0_SOUT 0x0AC 0x000 ALT1 0x0
+#define VF610_PAD_PTB21__LCD43 0x0AC 0x000 ALT4 0x0
+#define VF610_PAD_PTB21__VIU_DATA12 0x0AC 0x000 ALT6 0x0
+#define VF610_PAD_PTB21__DCU1_PCLK 0x0AC 0x000 ALT7 0x0
+#define VF610_PAD_PTB22__GPIO_44 0x0B0 0x000 ALT0 0x0
+#define VF610_PAD_PTB22__DSPI0_SCK 0x0B0 0x000 ALT1 0x0
+#define VF610_PAD_PTB22__VLCD 0x0B0 0x000 ALT4 0x0
+#define VF610_PAD_PTB22__VIU_FID 0x0B0 0x3A8 ALT5 0x1
+#define VF610_PAD_PTC0__GPIO_45 0x0B4 0x000 ALT0 0x0
+#define VF610_PAD_PTC0__ENET_RMII0_MDC 0x0B4 0x000 ALT1 0x0
+#define VF610_PAD_PTC0__FTM1_CH0 0x0B4 0x32C ALT2 0x1
+#define VF610_PAD_PTC0__DSPI0_CS3 0x0B4 0x000 ALT3 0x0
+#define VF610_PAD_PTC0__ESAI_SCKT 0x0B4 0x310 ALT4 0x0
+#define VF610_PAD_PTC0__ESDHC0_CLK 0x0B4 0x000 ALT5 0x0
+#define VF610_PAD_PTC0__VIU_DATA0 0x0B4 0x000 ALT6 0x0
+#define VF610_PAD_PTC0__SRC_RCON18 0x0B4 0x398 ALT7 0x0
+#define VF610_PAD_PTC1__GPIO_46 0x0B8 0x000 ALT0 0x0
+#define VF610_PAD_PTC1__ENET_RMII0_MDIO 0x0B8 0x000 ALT1 0x0
+#define VF610_PAD_PTC1__FTM1_CH1 0x0B8 0x330 ALT2 0x1
+#define VF610_PAD_PTC1__DSPI0_CS2 0x0B8 0x000 ALT3 0x0
+#define VF610_PAD_PTC1__ESAI_FST 0x0B8 0x30C ALT4 0x0
+#define VF610_PAD_PTC1__ESDHC0_CMD 0x0B8 0x000 ALT5 0x0
+#define VF610_PAD_PTC1__VIU_DATA1 0x0B8 0x000 ALT6 0x0
+#define VF610_PAD_PTC1__SRC_RCON19 0x0B8 0x39C ALT7 0x0
+#define VF610_PAD_PTC2__GPIO_47 0x0BC 0x000 ALT0 0x0
+#define VF610_PAD_PTC2__ENET_RMII0_CRS 0x0BC 0x000 ALT1 0x0
+#define VF610_PAD_PTC2__UART1_TX 0x0BC 0x380 ALT2 0x1
+#define VF610_PAD_PTC2__ESAI_SDO0 0x0BC 0x314 ALT4 0x0
+#define VF610_PAD_PTC2__ESDHC0_DAT0 0x0BC 0x000 ALT5 0x0
+#define VF610_PAD_PTC2__VIU_DATA2 0x0BC 0x000 ALT6 0x0
+#define VF610_PAD_PTC2__SRC_RCON20 0x0BC 0x3A0 ALT7 0x0
+#define VF610_PAD_PTC3__GPIO_48 0x0C0 0x000 ALT0 0x0
+#define VF610_PAD_PTC3__ENET_RMII0_RXD1 0x0C0 0x000 ALT1 0x0
+#define VF610_PAD_PTC3__UART1_RX 0x0C0 0x37C ALT2 0x1
+#define VF610_PAD_PTC3__ESAI_SDO1 0x0C0 0x318 ALT4 0x0
+#define VF610_PAD_PTC3__ESDHC0_DAT1 0x0C0 0x000 ALT5 0x0
+#define VF610_PAD_PTC3__VIU_DATA3 0x0C0 0x000 ALT6 0x0
+#define VF610_PAD_PTC3__DCU0_R0 0x0C0 0x000 ALT7 0x0
+#define VF610_PAD_PTC4__GPIO_49 0x0C4 0x000 ALT0 0x0
+#define VF610_PAD_PTC4__ENET_RMII0_RXD0 0x0C4 0x000 ALT1 0x0
+#define VF610_PAD_PTC4__UART1_RTS 0x0C4 0x000 ALT2 0x0
+#define VF610_PAD_PTC4__DSPI1_CS1 0x0C4 0x000 ALT3 0x0
+#define VF610_PAD_PTC4__ESAI_SDO2 0x0C4 0x31C ALT4 0x0
+#define VF610_PAD_PTC4__ESDHC0_DAT2 0x0C4 0x000 ALT5 0x0
+#define VF610_PAD_PTC4__VIU_DATA4 0x0C4 0x000 ALT6 0x0
+#define VF610_PAD_PTC4__DCU0_R1 0x0C4 0x000 ALT7 0x0
+#define VF610_PAD_PTC5__GPIO_50 0x0C8 0x000 ALT0 0x0
+#define VF610_PAD_PTC5__ENET_RMII0_RXER 0x0C8 0x000 ALT1 0x0
+#define VF610_PAD_PTC5__UART1_CTS 0x0C8 0x378 ALT2 0x1
+#define VF610_PAD_PTC5__DSPI1_CS0 0x0C8 0x300 ALT3 0x0
+#define VF610_PAD_PTC5__ESAI_SDO3 0x0C8 0x320 ALT4 0x0
+#define VF610_PAD_PTC5__ESDHC0_DAT3 0x0C8 0x000 ALT5 0x0
+#define VF610_PAD_PTC5__VIU_DATA5 0x0C8 0x000 ALT6 0x0
+#define VF610_PAD_PTC5__DCU0_G0 0x0C8 0x000 ALT7 0x0
+#define VF610_PAD_PTC6__GPIO_51 0x0CC 0x000 ALT0 0x0
+#define VF610_PAD_PTC6__ENET_RMII0_TXD1 0x0CC 0x000 ALT1 0x0
+#define VF610_PAD_PTC6__DSPI1_SIN 0x0CC 0x2FC ALT3 0x0
+#define VF610_PAD_PTC6__ESAI_SDI0 0x0CC 0x328 ALT4 0x0
+#define VF610_PAD_PTC6__ESDHC0_WP 0x0CC 0x000 ALT5 0x0
+#define VF610_PAD_PTC6__VIU_DATA6 0x0CC 0x000 ALT6 0x0
+#define VF610_PAD_PTC6__DCU0_G1 0x0CC 0x000 ALT7 0x0
+#define VF610_PAD_PTC7__GPIO_52 0x0D0 0x000 ALT0 0x0
+#define VF610_PAD_PTC7__ENET_RMII0_TXD0 0x0D0 0x000 ALT1 0x0
+#define VF610_PAD_PTC7__DSPI1_SOUT 0x0D0 0x000 ALT3 0x0
+#define VF610_PAD_PTC7__ESAI_SDI1 0x0D0 0x324 ALT4 0x0
+#define VF610_PAD_PTC7__VIU_DATA7 0x0D0 0x000 ALT6 0x0
+#define VF610_PAD_PTC7__DCU0_B0 0x0D0 0x000 ALT7 0x0
+#define VF610_PAD_PTC8__GPIO_53 0x0D4 0x000 ALT0 0x0
+#define VF610_PAD_PTC8__ENET_RMII0_TXEN 0x0D4 0x000 ALT1 0x0
+#define VF610_PAD_PTC8__DSPI1_SCK 0x0D4 0x2F8 ALT3 0x0
+#define VF610_PAD_PTC8__VIU_DATA8 0x0D4 0x000 ALT6 0x0
+#define VF610_PAD_PTC8__DCU0_B1 0x0D4 0x000 ALT7 0x0
+#define VF610_PAD_PTC9__GPIO_54 0x0D8 0x000 ALT0 0x0
+#define VF610_PAD_PTC9__ENET_RMII1_MDC 0x0D8 0x000 ALT1 0x0
+#define VF610_PAD_PTC9__ESAI_SCKT 0x0D8 0x310 ALT3 0x1
+#define VF610_PAD_PTC9__MLB_CLK 0x0D8 0x354 ALT6 0x1
+#define VF610_PAD_PTC9__DEBUG_OUT0 0x0D8 0x000 ALT7 0x0
+#define VF610_PAD_PTC10__GPIO_55 0x0DC 0x000 ALT0 0x0
+#define VF610_PAD_PTC10__ENET_RMII1_MDIO 0x0DC 0x000 ALT1 0x0
+#define VF610_PAD_PTC10__ESAI_FST 0x0DC 0x30C ALT3 0x1
+#define VF610_PAD_PTC10__MLB_SIGNAL 0x0DC 0x35C ALT6 0x1
+#define VF610_PAD_PTC10__DEBUG_OUT1 0x0DC 0x000 ALT7 0x0
+#define VF610_PAD_PTC11__GPIO_56 0x0E0 0x000 ALT0 0x0
+#define VF610_PAD_PTC11__ENET_RMII1_CRS 0x0E0 0x000 ALT1 0x0
+#define VF610_PAD_PTC11__ESAI_SDO0 0x0E0 0x314 ALT3 0x1
+#define VF610_PAD_PTC11__MLB_DATA 0x0E0 0x358 ALT6 0x1
+#define VF610_PAD_PTC11__DEBUG_OUT 0x0E0 0x000 ALT7 0x0
+#define VF610_PAD_PTC12__GPIO_57 0x0E4 0x000 ALT0 0x0
+#define VF610_PAD_PTC12__ENET_RMII1_RXD1 0x0E4 0x000 ALT1 0x0
+#define VF610_PAD_PTC12__ESAI_SDO1 0x0E4 0x318 ALT3 0x1
+#define VF610_PAD_PTC12__SAI2_TX_BCLK 0x0E4 0x370 ALT5 0x1
+#define VF610_PAD_PTC12__DEBUG_OUT3 0x0E4 0x000 ALT7 0x0
+#define VF610_PAD_PTC13__GPIO_58 0x0E8 0x000 ALT0 0x0
+#define VF610_PAD_PTC13__ENET_RMII1_RXD0 0x0E8 0x000 ALT1 0x0
+#define VF610_PAD_PTC13__ESAI_SDO2 0x0E8 0x31C ALT3 0x1
+#define VF610_PAD_PTC13__SAI2_RX_BCLK 0x0E8 0x364 ALT5 0x2
+#define VF610_PAD_PTC13__DEBUG_OUT4 0x0E8 0x000 ALT7 0x0
+#define VF610_PAD_PTC14__GPIO_59 0x0EC 0x000 ALT0 0x0
+#define VF610_PAD_PTC14__ENET_RMII1_RXER 0x0EC 0x000 ALT1 0x0
+#define VF610_PAD_PTC14__ESAI_SDO3 0x0EC 0x320 ALT3 0x1
+#define VF610_PAD_PTC14__UART5_TX 0x0EC 0x000 ALT4 0x0
+#define VF610_PAD_PTC14__SAI2_RX_DATA 0x0EC 0x368 ALT5 0x2
+#define VF610_PAD_PTC14__ADC0_SE6 0x0EC 0x000 ALT6 0x0
+#define VF610_PAD_PTC14__DEBUG_OUT5 0x0EC 0x000 ALT7 0x0
+#define VF610_PAD_PTC15__GPIO_60 0x0F0 0x000 ALT0 0x0
+#define VF610_PAD_PTC15__ENET_RMII1_TXD1 0x0F0 0x000 ALT1 0x0
+#define VF610_PAD_PTC15__ESAI_SDI0 0x0F0 0x328 ALT3 0x1
+#define VF610_PAD_PTC15__UART5_RX 0x0F0 0x000 ALT4 0x0
+#define VF610_PAD_PTC15__SAI2_TX_DATA 0x0F0 0x000 ALT5 0x0
+#define VF610_PAD_PTC15__ADC0_SE7 0x0F0 0x000 ALT6 0x0
+#define VF610_PAD_PTC15__DEBUG_OUT6 0x0F0 0x000 ALT7 0x0
+#define VF610_PAD_PTC16__GPIO_61 0x0F4 0x000 ALT0 0x0
+#define VF610_PAD_PTC16__ENET_RMII1_TXD0 0x0F4 0x000 ALT1 0x0
+#define VF610_PAD_PTC16__ESAI_SDI1 0x0F4 0x324 ALT3 0x1
+#define VF610_PAD_PTC16__UART5_RTS 0x0F4 0x000 ALT4 0x0
+#define VF610_PAD_PTC16__SAI2_RX_SYNC 0x0F4 0x36C ALT5 0x2
+#define VF610_PAD_PTC16__ADC1_SE6 0x0F4 0x000 ALT6 0x0
+#define VF610_PAD_PTC16__DEBUG_OUT7 0x0F4 0x000 ALT7 0x0
+#define VF610_PAD_PTC17__GPIO_62 0x0F8 0x000 ALT0 0x0
+#define VF610_PAD_PTC17__ENET_RMII1_TXEN 0x0F8 0x000 ALT1 0x0
+#define VF610_PAD_PTC17__ADC1_SE7 0x0F8 0x000 ALT3 0x0
+#define VF610_PAD_PTC17__UART5_CTS 0x0F8 0x000 ALT4 0x0
+#define VF610_PAD_PTC17__SAI2_TX_SYNC 0x0F8 0x374 ALT5 0x1
+#define VF610_PAD_PTC17__USB1_SOF_PULSE 0x0F8 0x000 ALT6 0x0
+#define VF610_PAD_PTC17__DEBUG_OUT8 0x0F8 0x000 ALT7 0x0
+#define VF610_PAD_PTD31__GPIO_63 0x0FC 0x000 ALT0 0x0
+#define VF610_PAD_PTD31__FB_AD31 0x0FC 0x000 ALT1 0x0
+#define VF610_PAD_PTD31__NF_IO15 0x0FC 0x000 ALT2 0x0
+#define VF610_PAD_PTD31__FTM3_CH0 0x0FC 0x000 ALT4 0x0
+#define VF610_PAD_PTD31__DSPI2_CS1 0x0FC 0x000 ALT5 0x0
+#define VF610_PAD_PTD31__DEBUG_OUT9 0x0FC 0x000 ALT7 0x0
+#define VF610_PAD_PTD30__GPIO_64 0x100 0x000 ALT0 0x0
+#define VF610_PAD_PTD30__FB_AD30 0x100 0x000 ALT1 0x0
+#define VF610_PAD_PTD30__NF_IO14 0x100 0x000 ALT2 0x0
+#define VF610_PAD_PTD30__FTM3_CH1 0x100 0x000 ALT4 0x0
+#define VF610_PAD_PTD30__DSPI2_CS0 0x100 0x000 ALT5 0x0
+#define VF610_PAD_PTD30__DEBUG_OUT10 0x100 0x000 ALT7 0x0
+#define VF610_PAD_PTD29__GPIO_65 0x104 0x000 ALT0 0x0
+#define VF610_PAD_PTD29__FB_AD29 0x104 0x000 ALT1 0x0
+#define VF610_PAD_PTD29__NF_IO13 0x104 0x000 ALT2 0x0
+#define VF610_PAD_PTD29__FTM3_CH2 0x104 0x000 ALT4 0x0
+#define VF610_PAD_PTD29__DSPI2_SIN 0x104 0x000 ALT5 0x0
+#define VF610_PAD_PTD29__DEBUG_OUT11 0x104 0x000 ALT7 0x0
+#define VF610_PAD_PTD28__GPIO_66 0x108 0x000 ALT0 0x0
+#define VF610_PAD_PTD28__FB_AD28 0x108 0x000 ALT1 0x0
+#define VF610_PAD_PTD28__NF_IO12 0x108 0x000 ALT2 0x0
+#define VF610_PAD_PTD28__I2C2_SCL 0x108 0x34C ALT3 0x1
+#define VF610_PAD_PTD28__FTM3_CH3 0x108 0x000 ALT4 0x0
+#define VF610_PAD_PTD28__DSPI2_SOUT 0x108 0x000 ALT5 0x0
+#define VF610_PAD_PTD28__DEBUG_OUT12 0x108 0x000 ALT7 0x0
+#define VF610_PAD_PTD27__GPIO_67 0x10C 0x000 ALT0 0x0
+#define VF610_PAD_PTD27__FB_AD27 0x10C 0x000 ALT1 0x0
+#define VF610_PAD_PTD27__NF_IO11 0x10C 0x000 ALT2 0x0
+#define VF610_PAD_PTD27__I2C2_SDA 0x10C 0x350 ALT3 0x1
+#define VF610_PAD_PTD27__FTM3_CH4 0x10C 0x000 ALT4 0x0
+#define VF610_PAD_PTD27__DSPI2_SCK 0x10C 0x000 ALT5 0x0
+#define VF610_PAD_PTD27__DEBUG_OUT13 0x10C 0x000 ALT7 0x0
+#define VF610_PAD_PTD26__GPIO_68 0x110 0x000 ALT0 0x0
+#define VF610_PAD_PTD26__FB_AD26 0x110 0x000 ALT1 0x0
+#define VF610_PAD_PTD26__NF_IO10 0x110 0x000 ALT2 0x0
+#define VF610_PAD_PTD26__FTM3_CH5 0x110 0x000 ALT4 0x0
+#define VF610_PAD_PTD26__ESDHC1_WP 0x110 0x000 ALT5 0x0
+#define VF610_PAD_PTD26__DEBUG_OUT14 0x110 0x000 ALT7 0x0
+#define VF610_PAD_PTD25__GPIO_69 0x114 0x000 ALT0 0x0
+#define VF610_PAD_PTD25__FB_AD25 0x114 0x000 ALT1 0x0
+#define VF610_PAD_PTD25__NF_IO9 0x114 0x000 ALT2 0x0
+#define VF610_PAD_PTD25__FTM3_CH6 0x114 0x000 ALT4 0x0
+#define VF610_PAD_PTD25__DEBUG_OUT15 0x114 0x000 ALT7 0x0
+#define VF610_PAD_PTD24__GPIO_70 0x118 0x000 ALT0 0x0
+#define VF610_PAD_PTD24__FB_AD24 0x118 0x000 ALT1 0x0
+#define VF610_PAD_PTD24__NF_IO8 0x118 0x000 ALT2 0x0
+#define VF610_PAD_PTD24__FTM3_CH7 0x118 0x000 ALT4 0x0
+#define VF610_PAD_PTD24__DEBUG_OUT16 0x118 0x000 ALT7 0x0
+#define VF610_PAD_PTD23__GPIO_71 0x11C 0x000 ALT0 0x0
+#define VF610_PAD_PTD23__FB_AD23 0x11C 0x000 ALT1 0x0
+#define VF610_PAD_PTD23__NF_IO7 0x11C 0x000 ALT2 0x0
+#define VF610_PAD_PTD23__FTM2_CH0 0x11C 0x000 ALT3 0x0
+#define VF610_PAD_PTD23__ENET0_1588_TMR0 0x11C 0x304 ALT4 0x1
+#define VF610_PAD_PTD23__ESDHC0_DAT4 0x11C 0x000 ALT5 0x0
+#define VF610_PAD_PTD23__UART2_TX 0x11C 0x38C ALT6 0x1
+#define VF610_PAD_PTD23__DCU1_R3 0x11C 0x000 ALT7 0x0
+#define VF610_PAD_PTD22__GPIO_72 0x120 0x000 ALT0 0x0
+#define VF610_PAD_PTD22__FB_AD22 0x120 0x000 ALT1 0x0
+#define VF610_PAD_PTD22__NF_IO6 0x120 0x000 ALT2 0x0
+#define VF610_PAD_PTD22__FTM2_CH1 0x120 0x000 ALT3 0x0
+#define VF610_PAD_PTD22__ENET0_1588_TMR1 0x120 0x308 ALT4 0x1
+#define VF610_PAD_PTD22__ESDHC0_DAT5 0x120 0x000 ALT5 0x0
+#define VF610_PAD_PTD22__UART2_RX 0x120 0x388 ALT6 0x1
+#define VF610_PAD_PTD22__DCU1_R4 0x120 0x000 ALT7 0x0
+#define VF610_PAD_PTD21__GPIO_73 0x124 0x000 ALT0 0x0
+#define VF610_PAD_PTD21__FB_AD21 0x124 0x000 ALT1 0x0
+#define VF610_PAD_PTD21__NF_IO5 0x124 0x000 ALT2 0x0
+#define VF610_PAD_PTD21__ENET0_1588_TMR2 0x124 0x000 ALT4 0x0
+#define VF610_PAD_PTD21__ESDHC0_DAT6 0x124 0x000 ALT5 0x0
+#define VF610_PAD_PTD21__UART2_RTS 0x124 0x000 ALT6 0x0
+#define VF610_PAD_PTD21__DCU1_R5 0x124 0x000 ALT7 0x0
+#define VF610_PAD_PTD20__GPIO_74 0x128 0x000 ALT0 0x0
+#define VF610_PAD_PTD20__FB_AD20 0x128 0x000 ALT1 0x0
+#define VF610_PAD_PTD20__NF_IO4 0x128 0x000 ALT2 0x0
+#define VF610_PAD_PTD20__ENET0_1588_TMR3 0x128 0x000 ALT4 0x0
+#define VF610_PAD_PTD20__ESDHC0_DAT7 0x128 0x000 ALT5 0x0
+#define VF610_PAD_PTD20__UART2_CTS 0x128 0x384 ALT6 0x0
+#define VF610_PAD_PTD20__DCU1_R0 0x128 0x000 ALT7 0x0
+#define VF610_PAD_PTD19__GPIO_75 0x12C 0x000 ALT0 0x0
+#define VF610_PAD_PTD19__FB_AD19 0x12C 0x000 ALT1 0x0
+#define VF610_PAD_PTD19__NF_IO3 0x12C 0x000 ALT2 0x0
+#define VF610_PAD_PTD19__ESAI_SCKR 0x12C 0x000 ALT3 0x0
+#define VF610_PAD_PTD19__I2C0_SCL 0x12C 0x33C ALT4 0x2
+#define VF610_PAD_PTD19__FTM2_QD_PHA 0x12C 0x000 ALT5 0x0
+#define VF610_PAD_PTD19__DCU1_R1 0x12C 0x000 ALT7 0x0
+#define VF610_PAD_PTD18__GPIO_76 0x130 0x000 ALT0 0x0
+#define VF610_PAD_PTD18__FB_AD18 0x130 0x000 ALT1 0x0
+#define VF610_PAD_PTD18__NF_IO2 0x130 0x000 ALT2 0x0
+#define VF610_PAD_PTD18__ESAI_FSR 0x130 0x000 ALT3 0x0
+#define VF610_PAD_PTD18__I2C0_SDA 0x130 0x340 ALT4 0x2
+#define VF610_PAD_PTD18__FTM2_QD_PHB 0x130 0x000 ALT5 0x0
+#define VF610_PAD_PTD18__DCU1_G0 0x130 0x000 ALT7 0x0
+#define VF610_PAD_PTD17__GPIO_77 0x134 0x000 ALT0 0x0
+#define VF610_PAD_PTD17__FB_AD17 0x134 0x000 ALT1 0x0
+#define VF610_PAD_PTD17__NF_IO1 0x134 0x000 ALT2 0x0
+#define VF610_PAD_PTD17__ESAI_HCKR 0x134 0x000 ALT3 0x0
+#define VF610_PAD_PTD17__I2C1_SCL 0x134 0x344 ALT4 0x2
+#define VF610_PAD_PTD17__DCU1_G1 0x134 0x000 ALT7 0x0
+#define VF610_PAD_PTD16__GPIO_78 0x138 0x000 ALT0 0x0
+#define VF610_PAD_PTD16__FB_AD16 0x138 0x000 ALT1 0x0
+#define VF610_PAD_PTD16__NF_IO0 0x138 0x000 ALT2 0x0
+#define VF610_PAD_PTD16__ESAI_HCKT 0x138 0x000 ALT3 0x0
+#define VF610_PAD_PTD16__I2C1_SDA 0x138 0x348 ALT4 0x2
+#define VF610_PAD_PTD16__DCU1_G2 0x138 0x000 ALT7 0x0
+#define VF610_PAD_PTD0__GPIO_79 0x13C 0x000 ALT0 0x0
+#define VF610_PAD_PTD0__QSPI0_A_QSCK 0x13C 0x000 ALT1 0x0
+#define VF610_PAD_PTD0__UART2_TX 0x13C 0x38C ALT2 0x2
+#define VF610_PAD_PTD0__FB_AD15 0x13C 0x000 ALT4 0x0
+#define VF610_PAD_PTD0__SPDIF_EXTCLK 0x13C 0x000 ALT5 0x0
+#define VF610_PAD_PTD0__DEBUG_OUT17 0x13C 0x000 ALT7 0x0
+#define VF610_PAD_PTD1__GPIO_80 0x140 0x000 ALT0 0x0
+#define VF610_PAD_PTD1__QSPI0_A_CS0 0x140 0x000 ALT1 0x0
+#define VF610_PAD_PTD1__UART2_RX 0x140 0x388 ALT2 0x2
+#define VF610_PAD_PTD1__FB_AD14 0x140 0x000 ALT4 0x0
+#define VF610_PAD_PTD1__SPDIF_IN1 0x140 0x000 ALT5 0x0
+#define VF610_PAD_PTD1__DEBUG_OUT18 0x140 0x000 ALT7 0x0
+#define VF610_PAD_PTD2__GPIO_81 0x144 0x000 ALT0 0x0
+#define VF610_PAD_PTD2__QSPI0_A_DATA3 0x144 0x000 ALT1 0x0
+#define VF610_PAD_PTD2__UART2_RTS 0x144 0x000 ALT2 0x0
+#define VF610_PAD_PTD2__DSPI1_CS3 0x144 0x000 ALT3 0x0
+#define VF610_PAD_PTD2__FB_AD13 0x144 0x000 ALT4 0x0
+#define VF610_PAD_PTD2__SPDIF_OUT1 0x144 0x000 ALT5 0x0
+#define VF610_PAD_PTD2__DEBUG_OUT19 0x144 0x000 ALT7 0x0
+#define VF610_PAD_PTD3__GPIO_82 0x148 0x000 ALT0 0x0
+#define VF610_PAD_PTD3__QSPI0_A_DATA2 0x148 0x000 ALT1 0x0
+#define VF610_PAD_PTD3__UART2_CTS 0x148 0x384 ALT2 0x1
+#define VF610_PAD_PTD3__DSPI1_CS2 0x148 0x000 ALT3 0x0
+#define VF610_PAD_PTD3__FB_AD12 0x148 0x000 ALT4 0x0
+#define VF610_PAD_PTD3__SPDIF_PLOCK 0x148 0x000 ALT5 0x0
+#define VF610_PAD_PTD3__DEBUG_OUT20 0x148 0x000 ALT7 0x0
+#define VF610_PAD_PTD4__GPIO_83 0x14C 0x000 ALT0 0x0
+#define VF610_PAD_PTD4__QSPI0_A_DATA1 0x14C 0x000 ALT1 0x0
+#define VF610_PAD_PTD4__DSPI1_CS1 0x14C 0x000 ALT3 0x0
+#define VF610_PAD_PTD4__FB_AD11 0x14C 0x000 ALT4 0x0
+#define VF610_PAD_PTD4__SPDIF_SRCLK 0x14C 0x000 ALT5 0x0
+#define VF610_PAD_PTD4__DEBUG_OUT21 0x14C 0x000 ALT7 0x0
+#define VF610_PAD_PTD5__GPIO_84 0x150 0x000 ALT0 0x0
+#define VF610_PAD_PTD5__QSPI0_A_DATA0 0x150 0x000 ALT1 0x0
+#define VF610_PAD_PTD5__DSPI1_CS0 0x150 0x300 ALT3 0x1
+#define VF610_PAD_PTD5__FB_AD10 0x150 0x000 ALT4 0x0
+#define VF610_PAD_PTD5__DEBUG_OUT22 0x150 0x000 ALT7 0x0
+#define VF610_PAD_PTD6__GPIO_85 0x154 0x000 ALT0 0x0
+#define VF610_PAD_PTD6__QSPI1_A_DQS 0x154 0x000 ALT1 0x0
+#define VF610_PAD_PTD6__DSPI1_SIN 0x154 0x2FC ALT3 0x1
+#define VF610_PAD_PTD6__FB_AD9 0x154 0x000 ALT4 0x0
+#define VF610_PAD_PTD6__DEBUG_OUT23 0x154 0x000 ALT7 0x0
+#define VF610_PAD_PTD7__GPIO_86 0x158 0x000 ALT0 0x0
+#define VF610_PAD_PTD7__QSPI0_B_QSCK 0x158 0x000 ALT1 0x0
+#define VF610_PAD_PTD7__DSPI1_SOUT 0x158 0x000 ALT3 0x0
+#define VF610_PAD_PTD7__FB_AD8 0x158 0x000 ALT4 0x0
+#define VF610_PAD_PTD7__DEBUG_OUT24 0x158 0x000 ALT7 0x0
+#define VF610_PAD_PTD8__GPIO_87 0x15C 0x000 ALT0 0x0
+#define VF610_PAD_PTD8__QSPI0_B_CS0 0x15C 0x000 ALT1 0x0
+#define VF610_PAD_PTD8__FB_CLKOUT 0x15C 0x000 ALT2 0x0
+#define VF610_PAD_PTD8__DSPI1_SCK 0x15C 0x2F8 ALT3 0x1
+#define VF610_PAD_PTD8__FB_AD7 0x15C 0x000 ALT4 0x0
+#define VF610_PAD_PTD8__DEBUG_OUT25 0x15C 0x000 ALT7 0x0
+#define VF610_PAD_PTD9__GPIO_88 0x160 0x000 ALT0 0x0
+#define VF610_PAD_PTD9__QSPI0_B_DATA3 0x160 0x000 ALT1 0x0
+#define VF610_PAD_PTD9__DSPI3_CS1 0x160 0x000 ALT2 0x0
+#define VF610_PAD_PTD9__FB_AD6 0x160 0x000 ALT4 0x0
+#define VF610_PAD_PTD9__SAI1_TX_SYNC 0x160 0x360 ALT6 0x0
+#define VF610_PAD_PTD9__DCU1_B0 0x160 0x000 ALT7 0x0
+#define VF610_PAD_PTD10__GPIO_89 0x164 0x000 ALT0 0x0
+#define VF610_PAD_PTD10__QSPI0_B_DATA2 0x164 0x000 ALT1 0x0
+#define VF610_PAD_PTD10__DSPI3_CS0 0x164 0x000 ALT2 0x0
+#define VF610_PAD_PTD10__FB_AD5 0x164 0x000 ALT4 0x0
+#define VF610_PAD_PTD10__DCU1_B1 0x164 0x000 ALT7 0x0
+#define VF610_PAD_PTD11__GPIO_90 0x168 0x000 ALT0 0x0
+#define VF610_PAD_PTD11__QSPI0_B_DATA1 0x168 0x000 ALT1 0x0
+#define VF610_PAD_PTD11__DSPI3_SIN 0x168 0x000 ALT2 0x0
+#define VF610_PAD_PTD11__FB_AD4 0x168 0x000 ALT4 0x0
+#define VF610_PAD_PTD11__DEBUG_OUT26 0x168 0x000 ALT7 0x0
+#define VF610_PAD_PTD12__GPIO_91 0x16C 0x000 ALT0 0x0
+#define VF610_PAD_PTD12__QSPI0_B_DATA0 0x16C 0x000 ALT1 0x0
+#define VF610_PAD_PTD12__DSPI3_SOUT 0x16C 0x000 ALT2 0x0
+#define VF610_PAD_PTD12__FB_AD3 0x16C 0x000 ALT4 0x0
+#define VF610_PAD_PTD12__DEBUG_OUT27 0x16C 0x000 ALT7 0x0
+#define VF610_PAD_PTD13__GPIO_92 0x170 0x000 ALT0 0x0
+#define VF610_PAD_PTD13__QSPI0_B_DQS 0x170 0x000 ALT1 0x0
+#define VF610_PAD_PTD13__DSPI3_SCK 0x170 0x000 ALT2 0x0
+#define VF610_PAD_PTD13__FB_AD2 0x170 0x000 ALT4 0x0
+#define VF610_PAD_PTD13__DEBUG_OUT28 0x170 0x000 ALT7 0x0
+#define VF610_PAD_PTB23__GPIO_93 0x174 0x000 ALT0 0x0
+#define VF610_PAD_PTB23__SAI0_TX_BCLK 0x174 0x000 ALT1 0x0
+#define VF610_PAD_PTB23__UART1_TX 0x174 0x380 ALT2 0x2
+#define VF610_PAD_PTB23__SRC_RCON18 0x174 0x398 ALT3 0x1
+#define VF610_PAD_PTB23__FB_MUXED_ALE 0x174 0x000 ALT4 0x0
+#define VF610_PAD_PTB23__FB_TS_B 0x174 0x000 ALT5 0x0
+#define VF610_PAD_PTB23__UART3_RTS 0x174 0x000 ALT6 0x0
+#define VF610_PAD_PTB23__DCU1_G3 0x174 0x000 ALT7 0x0
+#define VF610_PAD_PTB24__GPIO_94 0x178 0x000 ALT0 0x0
+#define VF610_PAD_PTB24__SAI0_RX_BCLK 0x178 0x000 ALT1 0x0
+#define VF610_PAD_PTB24__UART1_RX 0x178 0x37C ALT2 0x2
+#define VF610_PAD_PTB24__SRC_RCON19 0x178 0x39C ALT3 0x1
+#define VF610_PAD_PTB24__FB_MUXED_TSIZ0 0x178 0x000 ALT4 0x0
+#define VF610_PAD_PTB24__NF_WE_B 0x178 0x000 ALT5 0x0
+#define VF610_PAD_PTB24__UART3_CTS 0x178 0x000 ALT6 0x0
+#define VF610_PAD_PTB24__DCU1_G4 0x178 0x000 ALT7 0x0
+#define VF610_PAD_PTB25__GPIO_95 0x17C 0x000 ALT0 0x0
+#define VF610_PAD_PTB25__SAI0_RX_DATA 0x17C 0x000 ALT1 0x0
+#define VF610_PAD_PTB25__UART1_RTS 0x17C 0x000 ALT2 0x0
+#define VF610_PAD_PTB25__SRC_RCON20 0x17C 0x3A0 ALT3 0x1
+#define VF610_PAD_PTB25__FB_CS1_B 0x17C 0x000 ALT4 0x0
+#define VF610_PAD_PTB25__NF_CE0_B 0x17C 0x000 ALT5 0x0
+#define VF610_PAD_PTB25__DCU1_G5 0x17C 0x000 ALT7 0x0
+#define VF610_PAD_PTB26__GPIO_96 0x180 0x000 ALT0 0x0
+#define VF610_PAD_PTB26__SAI0_TX_DATA 0x180 0x000 ALT1 0x0
+#define VF610_PAD_PTB26__UART1_CTS 0x180 0x378 ALT2 0x2
+#define VF610_PAD_PTB26__SRC_RCON21 0x180 0x000 ALT3 0x0
+#define VF610_PAD_PTB26__FB_CS0_B 0x180 0x000 ALT4 0x0
+#define VF610_PAD_PTB26__NF_CE1_B 0x180 0x000 ALT5 0x0
+#define VF610_PAD_PTB26__DCU1_G6 0x180 0x000 ALT7 0x0
+#define VF610_PAD_PTB27__GPIO_97 0x184 0x000 ALT0 0x0
+#define VF610_PAD_PTB27__SAI0_RX_SYNC 0x184 0x000 ALT1 0x0
+#define VF610_PAD_PTB27__SRC_RCON22 0x184 0x000 ALT3 0x0
+#define VF610_PAD_PTB27__FB_OE_B 0x184 0x000 ALT4 0x0
+#define VF610_PAD_PTB27__FB_MUXED_TBST_B 0x184 0x000 ALT5 0x0
+#define VF610_PAD_PTB27__NF_RE_B 0x184 0x000 ALT6 0x0
+#define VF610_PAD_PTB27__DCU1_G7 0x184 0x000 ALT7 0x0
+#define VF610_PAD_PTB28__GPIO_98 0x188 0x000 ALT0 0x0
+#define VF610_PAD_PTB28__SAI0_TX_SYNC 0x188 0x000 ALT1 0x0
+#define VF610_PAD_PTB28__SRC_RCON23 0x188 0x000 ALT3 0x0
+#define VF610_PAD_PTB28__FB_RW_B 0x188 0x000 ALT4 0x0
+#define VF610_PAD_PTB28__DCU1_B6 0x188 0x000 ALT7 0x0
+#define VF610_PAD_PTC26__GPIO_99 0x18C 0x000 ALT0 0x0
+#define VF610_PAD_PTC26__SAI1_TX_BCLK 0x18C 0x000 ALT1 0x0
+#define VF610_PAD_PTC26__DSPI0_CS5 0x18C 0x000 ALT2 0x0
+#define VF610_PAD_PTC26__SRC_RCON24 0x18C 0x000 ALT3 0x0
+#define VF610_PAD_PTC26__FB_TA_B 0x18C 0x000 ALT4 0x0
+#define VF610_PAD_PTC26__NF_RB_B 0x18C 0x000 ALT5 0x0
+#define VF610_PAD_PTC26__DCU1_B7 0x18C 0x000 ALT7 0x0
+#define VF610_PAD_PTC27__GPIO_100 0x190 0x000 ALT0 0x0
+#define VF610_PAD_PTC27__SAI1_RX_BCLK 0x190 0x000 ALT1 0x0
+#define VF610_PAD_PTC27__DSPI0_CS4 0x190 0x000 ALT2 0x0
+#define VF610_PAD_PTC27__SRC_RCON25 0x190 0x000 ALT3 0x0
+#define VF610_PAD_PTC27__FB_BE3_B 0x190 0x000 ALT4 0x0
+#define VF610_PAD_PTC27__FB_CS3_B 0x190 0x000 ALT5 0x0
+#define VF610_PAD_PTC27__NF_ALE 0x190 0x000 ALT6 0x0
+#define VF610_PAD_PTC27__DCU1_B2 0x190 0x000 ALT7 0x0
+#define VF610_PAD_PTC28__GPIO_101 0x194 0x000 ALT0 0x0
+#define VF610_PAD_PTC28__SAI1_RX_DATA 0x194 0x000 ALT1 0x0
+#define VF610_PAD_PTC28__DSPI0_CS3 0x194 0x000 ALT2 0x0
+#define VF610_PAD_PTC28__SRC_RCON26 0x194 0x000 ALT3 0x0
+#define VF610_PAD_PTC28__FB_BE2_B 0x194 0x000 ALT4 0x0
+#define VF610_PAD_PTC28__FB_CS2_B 0x194 0x000 ALT5 0x0
+#define VF610_PAD_PTC28__NF_CLE 0x194 0x000 ALT6 0x0
+#define VF610_PAD_PTC28__DCU1_B3 0x194 0x000 ALT7 0x0
+#define VF610_PAD_PTC29__GPIO_102 0x198 0x000 ALT0 0x0
+#define VF610_PAD_PTC29__SAI1_TX_DATA 0x198 0x000 ALT1 0x0
+#define VF610_PAD_PTC29__DSPI0_CS2 0x198 0x000 ALT2 0x0
+#define VF610_PAD_PTC29__SRC_RCON27 0x198 0x000 ALT3 0x0
+#define VF610_PAD_PTC29__FB_BE1_B 0x198 0x000 ALT4 0x0
+#define VF610_PAD_PTC29__FB_MUXED_TSIZE1 0x198 0x000 ALT5 0x0
+#define VF610_PAD_PTC29__DCU1_B4 0x198 0x000 ALT7 0x0
+#define VF610_PAD_PTC30__GPIO_103 0x19C 0x000 ALT0 0x0
+#define VF610_PAD_PTC30__SAI1_RX_SYNC 0x19C 0x000 ALT1 0x0
+#define VF610_PAD_PTC30__DSPI1_CS2 0x19C 0x000 ALT2 0x0
+#define VF610_PAD_PTC30__SRC_RCON28 0x19C 0x000 ALT3 0x0
+#define VF610_PAD_PTC30__FB_MUXED_BE0_B 0x19C 0x000 ALT4 0x0
+#define VF610_PAD_PTC30__FB_TSIZ0 0x19C 0x000 ALT5 0x0
+#define VF610_PAD_PTC30__ADC0_SE5 0x19C 0x000 ALT6 0x0
+#define VF610_PAD_PTC30__DCU1_B5 0x19C 0x000 ALT7 0x0
+#define VF610_PAD_PTC31__GPIO_104 0x1A0 0x000 ALT0 0x0
+#define VF610_PAD_PTC31__SAI1_TX_SYNC 0x1A0 0x360 ALT1 0x1
+#define VF610_PAD_PTC31__SRC_RCON29 0x1A0 0x000 ALT3 0x0
+#define VF610_PAD_PTC31__ADC1_SE5 0x1A0 0x000 ALT6 0x0
+#define VF610_PAD_PTC31__DCU1_B6 0x1A0 0x000 ALT7 0x0
+#define VF610_PAD_PTE0__GPIO_105 0x1A4 0x000 ALT0 0x0
+#define VF610_PAD_PTE0__DCU0_HSYNC 0x1A4 0x000 ALT1 0x0
+#define VF610_PAD_PTE0__SRC_BMODE1 0x1A4 0x000 ALT2 0x0
+#define VF610_PAD_PTE0__LCD0 0x1A4 0x000 ALT4 0x0
+#define VF610_PAD_PTE0__DEBUG_OUT29 0x1A4 0x000 ALT7 0x0
+#define VF610_PAD_PTE1__GPIO_106 0x1A8 0x000 ALT0 0x0
+#define VF610_PAD_PTE1__DCU0_VSYNC 0x1A8 0x000 ALT1 0x0
+#define VF610_PAD_PTE1__SRC_BMODE0 0x1A8 0x000 ALT2 0x0
+#define VF610_PAD_PTE1__LCD1 0x1A8 0x000 ALT4 0x0
+#define VF610_PAD_PTE1__DEBUG_OUT30 0x1A8 0x000 ALT7 0x0
+#define VF610_PAD_PTE2__GPIO_107 0x1AC 0x000 ALT0 0x0
+#define VF610_PAD_PTE2__DCU0_PCLK 0x1AC 0x000 ALT1 0x0
+#define VF610_PAD_PTE2__LCD2 0x1AC 0x000 ALT4 0x0
+#define VF610_PAD_PTE2__DEBUG_OUT31 0x1AC 0x000 ALT7 0x0
+#define VF610_PAD_PTE3__GPIO_108 0x1B0 0x000 ALT0 0x0
+#define VF610_PAD_PTE3__DCU0_TAG 0x1B0 0x000 ALT1 0x0
+#define VF610_PAD_PTE3__LCD3 0x1B0 0x000 ALT4 0x0
+#define VF610_PAD_PTE3__DEBUG_OUT32 0x1B0 0x000 ALT7 0x0
+#define VF610_PAD_PTE4__GPIO_109 0x1B4 0x000 ALT0 0x0
+#define VF610_PAD_PTE4__DCU0_DE 0x1B4 0x000 ALT1 0x0
+#define VF610_PAD_PTE4__LCD4 0x1B4 0x000 ALT4 0x0
+#define VF610_PAD_PTE4__DEBUG_OUT33 0x1B4 0x000 ALT7 0x0
+#define VF610_PAD_PTE5__GPIO_110 0x1B8 0x000 ALT0 0x0
+#define VF610_PAD_PTE5__DCU0_R0 0x1B8 0x000 ALT1 0x0
+#define VF610_PAD_PTE5__LCD5 0x1B8 0x000 ALT4 0x0
+#define VF610_PAD_PTE5__DEBUG_OUT34 0x1B8 0x000 ALT7 0x0
+#define VF610_PAD_PTE6__GPIO_111 0x1BC 0x000 ALT0 0x0
+#define VF610_PAD_PTE6__DCU0_R1 0x1BC 0x000 ALT1 0x0
+#define VF610_PAD_PTE6__LCD6 0x1BC 0x000 ALT4 0x0
+#define VF610_PAD_PTE6__DEBUG_OUT35 0x1BC 0x000 ALT7 0x0
+#define VF610_PAD_PTE7__GPIO_112 0x1C0 0x000 ALT0 0x0
+#define VF610_PAD_PTE7__DCU0_R2 0x1C0 0x000 ALT1 0x0
+#define VF610_PAD_PTE7__SRC_RCON0 0x1C0 0x000 ALT3 0x0
+#define VF610_PAD_PTE7__LCD7 0x1C0 0x000 ALT4 0x0
+#define VF610_PAD_PTE7__DEBUG_OUT36 0x1C0 0x000 ALT7 0x0
+#define VF610_PAD_PTE8__GPIO_113 0x1C4 0x000 ALT0 0x0
+#define VF610_PAD_PTE8__DCU0_R3 0x1C4 0x000 ALT1 0x0
+#define VF610_PAD_PTE8__SRC_RCON1 0x1C4 0x000 ALT3 0x0
+#define VF610_PAD_PTE8__LCD8 0x1C4 0x000 ALT4 0x0
+#define VF610_PAD_PTE8__DEBUG_OUT37 0x1C4 0x000 ALT7 0x0
+#define VF610_PAD_PTE9__GPIO_114 0x1C8 0x000 ALT0 0x0
+#define VF610_PAD_PTE9__DCU0_R4 0x1C8 0x000 ALT1 0x0
+#define VF610_PAD_PTE9__SRC_RCON2 0x1C8 0x000 ALT3 0x0
+#define VF610_PAD_PTE9__LCD9 0x1C8 0x000 ALT4 0x0
+#define VF610_PAD_PTE9__DEBUG_OUT38 0x1C8 0x000 ALT7 0x0
+#define VF610_PAD_PTE10__GPIO_115 0x1CC 0x000 ALT0 0x0
+#define VF610_PAD_PTE10__DCU0_R5 0x1CC 0x000 ALT1 0x0
+#define VF610_PAD_PTE10__SRC_RCON3 0x1CC 0x000 ALT3 0x0
+#define VF610_PAD_PTE10__LCD10 0x1CC 0x000 ALT4 0x0
+#define VF610_PAD_PTE10__DEBUG_OUT39 0x1CC 0x000 ALT7 0x0
+#define VF610_PAD_PTE11__GPIO_116 0x1D0 0x000 ALT0 0x0
+#define VF610_PAD_PTE11__DCU0_R6 0x1D0 0x000 ALT1 0x0
+#define VF610_PAD_PTE11__SRC_RCON4 0x1D0 0x000 ALT3 0x0
+#define VF610_PAD_PTE11__LCD11 0x1D0 0x000 ALT4 0x0
+#define VF610_PAD_PTE11__DEBUG_OUT40 0x1D0 0x000 ALT7 0x0
+#define VF610_PAD_PTE12__GPIO_117 0x1D4 0x000 ALT0 0x0
+#define VF610_PAD_PTE12__DCU0_R7 0x1D4 0x000 ALT1 0x0
+#define VF610_PAD_PTE12__DSPI1_CS3 0x1D4 0x000 ALT2 0x0
+#define VF610_PAD_PTE12__SRC_RCON5 0x1D4 0x000 ALT3 0x0
+#define VF610_PAD_PTE12__LCD12 0x1D4 0x000 ALT4 0x0
+#define VF610_PAD_PTE12__LPT_ALT0 0x1D4 0x000 ALT7 0x0
+#define VF610_PAD_PTE13__GPIO_118 0x1D8 0x000 ALT0 0x0
+#define VF610_PAD_PTE13__DCU0_G0 0x1D8 0x000 ALT1 0x0
+#define VF610_PAD_PTE13__LCD13 0x1D8 0x000 ALT4 0x0
+#define VF610_PAD_PTE13__DEBUG_OUT41 0x1D8 0x000 ALT7 0x0
+#define VF610_PAD_PTE14__GPIO_119 0x1DC 0x000 ALT0 0x0
+#define VF610_PAD_PTE14__DCU0_G1 0x1DC 0x000 ALT1 0x0
+#define VF610_PAD_PTE14__LCD14 0x1DC 0x000 ALT4 0x0
+#define VF610_PAD_PTE14__DEBUG_OUT42 0x1DC 0x000 ALT7 0x0
+#define VF610_PAD_PTE15__GPIO_120 0x1E0 0x000 ALT0 0x0
+#define VF610_PAD_PTE15__DCU0_G2 0x1E0 0x000 ALT1 0x0
+#define VF610_PAD_PTE15__SRC_RCON6 0x1E0 0x000 ALT3 0x0
+#define VF610_PAD_PTE15__LCD15 0x1E0 0x000 ALT4 0x0
+#define VF610_PAD_PTE15__DEBUG_OUT43 0x1E0 0x000 ALT7 0x0
+#define VF610_PAD_PTE16__GPIO_121 0x1E4 0x000 ALT0 0x0
+#define VF610_PAD_PTE16__DCU0_G3 0x1E4 0x000 ALT1 0x0
+#define VF610_PAD_PTE16__SRC_RCON7 0x1E4 0x000 ALT3 0x0
+#define VF610_PAD_PTE16__LCD16 0x1E4 0x000 ALT4 0x0
+#define VF610_PAD_PTE17__GPIO_122 0x1E8 0x000 ALT0 0x0
+#define VF610_PAD_PTE17__DCU0_G4 0x1E8 0x000 ALT1 0x0
+#define VF610_PAD_PTE17__SRC_RCON8 0x1E8 0x000 ALT3 0x0
+#define VF610_PAD_PTE17__LCD17 0x1E8 0x000 ALT4 0x0
+#define VF610_PAD_PTE18__GPIO_123 0x1EC 0x000 ALT0 0x0
+#define VF610_PAD_PTE18__DCU0_G5 0x1EC 0x000 ALT1 0x0
+#define VF610_PAD_PTE18__SRC_RCON9 0x1EC 0x000 ALT3 0x0
+#define VF610_PAD_PTE18__LCD18 0x1EC 0x000 ALT4 0x0
+#define VF610_PAD_PTE19__GPIO_124 0x1F0 0x000 ALT0 0x0
+#define VF610_PAD_PTE19__DCU0_G6 0x1F0 0x000 ALT1 0x0
+#define VF610_PAD_PTE19__SRC_RCON10 0x1F0 0x000 ALT3 0x0
+#define VF610_PAD_PTE19__LCD19 0x1F0 0x000 ALT4 0x0
+#define VF610_PAD_PTE19__I2C0_SCL 0x1F0 0x33C ALT5 0x3
+#define VF610_PAD_PTE20__GPIO_125 0x1F4 0x000 ALT0 0x0
+#define VF610_PAD_PTE20__DCU0_G7 0x1F4 0x000 ALT1 0x0
+#define VF610_PAD_PTE20__SRC_RCON11 0x1F4 0x000 ALT3 0x0
+#define VF610_PAD_PTE20__LCD20 0x1F4 0x000 ALT4 0x0
+#define VF610_PAD_PTE20__I2C0_SDA 0x1F4 0x340 ALT5 0x3
+#define VF610_PAD_PTE20__EWM_IN 0x1F4 0x000 ALT7 0x0
+#define VF610_PAD_PTE21__GPIO_126 0x1F8 0x000 ALT0 0x0
+#define VF610_PAD_PTE21__DCU0_B0 0x1F8 0x000 ALT1 0x0
+#define VF610_PAD_PTE21__LCD21 0x1F8 0x000 ALT4 0x0
+#define VF610_PAD_PTE22__GPIO_127 0x1FC 0x000 ALT0 0x0
+#define VF610_PAD_PTE22__DCU0_B1 0x1FC 0x000 ALT1 0x0
+#define VF610_PAD_PTE22__LCD22 0x1FC 0x000 ALT4 0x0
+#define VF610_PAD_PTE23__GPIO_128 0x200 0x000 ALT0 0x0
+#define VF610_PAD_PTE23__DCU0_B2 0x200 0x000 ALT1 0x0
+#define VF610_PAD_PTE23__SRC_RCON12 0x200 0x000 ALT3 0x0
+#define VF610_PAD_PTE23__LCD23 0x200 0x000 ALT4 0x0
+#define VF610_PAD_PTE24__GPIO_129 0x204 0x000 ALT0 0x0
+#define VF610_PAD_PTE24__DCU0_B3 0x204 0x000 ALT1 0x0
+#define VF610_PAD_PTE24__SRC_RCON13 0x204 0x000 ALT3 0x0
+#define VF610_PAD_PTE24__LCD24 0x204 0x000 ALT4 0x0
+#define VF610_PAD_PTE25__GPIO_130 0x208 0x000 ALT0 0x0
+#define VF610_PAD_PTE25__DCU0_B4 0x208 0x000 ALT1 0x0
+#define VF610_PAD_PTE25__SRC_RCON14 0x208 0x000 ALT3 0x0
+#define VF610_PAD_PTE25__LCD25 0x208 0x000 ALT4 0x0
+#define VF610_PAD_PTE26__GPIO_131 0x20C 0x000 ALT0 0x0
+#define VF610_PAD_PTE26__DCU0_B5 0x20C 0x000 ALT1 0x0
+#define VF610_PAD_PTE26__SRC_RCON15 0x20C 0x000 ALT3 0x0
+#define VF610_PAD_PTE26__LCD26 0x20C 0x000 ALT4 0x0
+#define VF610_PAD_PTE27__GPIO_132 0x210 0x000 ALT0 0x0
+#define VF610_PAD_PTE27__DCU0_B6 0x210 0x000 ALT1 0x0
+#define VF610_PAD_PTE27__SRC_RCON16 0x210 0x000 ALT3 0x0
+#define VF610_PAD_PTE27__LCD27 0x210 0x000 ALT4 0x0
+#define VF610_PAD_PTE27__I2C1_SCL 0x210 0x344 ALT5 0x3
+#define VF610_PAD_PTE28__GPIO_133 0x214 0x000 ALT0 0x0
+#define VF610_PAD_PTE28__DCU0_B7 0x214 0x000 ALT1 0x0
+#define VF610_PAD_PTE28__SRC_RCON17 0x214 0x000 ALT3 0x0
+#define VF610_PAD_PTE28__LCD28 0x214 0x000 ALT4 0x0
+#define VF610_PAD_PTE28__I2C1_SDA 0x214 0x348 ALT5 0x3
+#define VF610_PAD_PTE28__EWM_OUT 0x214 0x000 ALT7 0x0
+#define VF610_PAD_PTA7__GPIO_134 0x218 0x000 ALT0 0x0
+#define VF610_PAD_PTA7__VIU_PIX_CLK 0x218 0x3AC ALT1 0x1
+#define VF610_PAD_DDR_RESETB 0x21c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A15__DDR_A_15 0x220 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A14__DDR_A_14 0x224 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A13__DDR_A_13 0x228 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A12__DDR_A_12 0x22c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A11__DDR_A_11 0x230 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A10__DDR_A_10 0x234 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A9__DDR_A_9 0x238 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A8__DDR_A_8 0x23c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A7__DDR_A_7 0x240 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A6__DDR_A_6 0x244 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A5__DDR_A_5 0x248 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A4__DDR_A_4 0x24c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A3__DDR_A_3 0x250 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A2__DDR_A_2 0x254 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A1__DDR_A_1 0x258 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A0__DDR_A_0 0x25c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_BA2__DDR_BA_2 0x260 0x000 ALT0 0x0
+#define VF610_PAD_DDR_BA1__DDR_BA_1 0x264 0x000 ALT0 0x0
+#define VF610_PAD_DDR_BA0__DDR_BA_0 0x268 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CAS__DDR_CAS_B 0x26c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CKE__DDR_CKE_0 0x270 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CLK__DDR_CLK_0 0x274 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CS__DDR_CS_B_0 0x278 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D15__DDR_D_15 0x27c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D14__DDR_D_14 0x280 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D13__DDR_D_13 0x284 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D12__DDR_D_12 0x288 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D11__DDR_D_11 0x28c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D10__DDR_D_10 0x290 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D9__DDR_D_9 0x294 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D8__DDR_D_8 0x298 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D7__DDR_D_7 0x29c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D6__DDR_D_6 0x2a0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D5__DDR_D_5 0x2a4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D4__DDR_D_4 0x2a8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D3__DDR_D_3 0x2ac 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D2__DDR_D_2 0x2b0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D1__DDR_D_1 0x2b4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D0__DDR_D_0 0x2b8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQM1__DDR_DQM_1 0x2bc 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQM0__DDR_DQM_0 0x2c0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQS1__DDR_DQS_1 0x2c4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQS0__DDR_DQS_0 0x2c8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_RAS__DDR_RAS_B 0x2cc 0x000 ALT0 0x0
+#define VF610_PAD_DDR_WE__DDR_WE_B 0x2d0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_ODT1__DDR_ODT_0 0x2d4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_ODT0__DDR_ODT_1 0x2d8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1 0x2dc 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DDRBYTE2__DDR_DDRBYTE2 0x2e0 0x000 ALT0 0x0
+
+#endif
diff --git a/src/arm/nxp/vf/vf610-twr.dts b/src/arm/nxp/vf/vf610-twr.dts
new file mode 100644
index 0000000..876c14e
--- /dev/null
+++ b/src/arm/nxp/vf/vf610-twr.dts
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+ model = "VF610 Tower Board";
+ compatible = "fsl,vf610-twr", "fsl,vf610";
+
+ chosen {
+ bootargs = "console=ttyLP1,115200";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x8000000>;
+ };
+
+ audio_ext: mclk_osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ enet_ext: eth_osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3_mcu";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Headphone", "Headphone Jack",
+ "Speaker", "Speaker Ext",
+ "Line", "Line In Jack";
+ simple-audio-card,routing =
+ "MIC_IN", "Microphone Jack",
+ "Microphone Jack", "Mic Bias",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT",
+ "Speaker Ext", "LINE_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ frame-master;
+ bitclock-master;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&codec>;
+ frame-master;
+ bitclock-master;
+ };
+ };
+};
+
+&adc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_ad5>;
+ vref-supply = <®_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&clks {
+ clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>;
+ clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext";
+ assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
+ <&clks VF610_CLK_ENET_TS_SEL>;
+ assigned-clock-parents = <&clks VF610_CLK_ENET_EXT>,
+ <&clks VF610_CLK_ENET_EXT>;
+};
+
+&dspi0 {
+ bus-num = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dspi0>;
+ status = "okay";
+
+ sflash: at26df081a@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at26df081a";
+ spi-max-frequency = <16000000>;
+ spi-cpol;
+ spi-cpha;
+ reg = <0>;
+ };
+};
+
+&edma0 {
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ cd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&fec0 {
+ phy-mode = "rmii";
+ phy-handle = <ðphy0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec0>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+};
+
+&fec1 {
+ phy-mode = "rmii";
+ phy-handle = <ðphy1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ status = "okay";
+
+ codec: sgtl5000@a {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <®_3p3v>;
+ clocks = <&clks VF610_CLK_SAI2>;
+ };
+};
+
+&iomuxc {
+ vf610-twr {
+ pinctrl_adc0_ad5: adc0ad5grp {
+ fsl,pins = <
+ VF610_PAD_PTC30__ADC0_SE5 0xa1
+ >;
+ };
+
+ pinctrl_dspi0: dspi0grp {
+ fsl,pins = <
+ VF610_PAD_PTB19__DSPI0_CS0 0x1182
+ VF610_PAD_PTB20__DSPI0_SIN 0x1181
+ VF610_PAD_PTB21__DSPI0_SOUT 0x1182
+ VF610_PAD_PTB22__DSPI0_SCK 0x1182
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ VF610_PAD_PTA7__GPIO_134 0x219d
+ >;
+ };
+
+ pinctrl_fec0: fec0grp {
+ fsl,pins = <
+ VF610_PAD_PTA6__RMII_CLKIN 0x30d1
+ VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d3
+ VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d1
+ VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1
+ VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1
+ VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1
+ VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1
+ VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2
+ VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2
+ VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_i2c0: i2c0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__I2C0_SCL 0x30d3
+ VF610_PAD_PTB15__I2C0_SDA 0x30d3
+ >;
+ };
+
+ pinctrl_nfc: nfcgrp {
+ fsl,pins = <
+ VF610_PAD_PTD31__NF_IO15 0x28df
+ VF610_PAD_PTD30__NF_IO14 0x28df
+ VF610_PAD_PTD29__NF_IO13 0x28df
+ VF610_PAD_PTD28__NF_IO12 0x28df
+ VF610_PAD_PTD27__NF_IO11 0x28df
+ VF610_PAD_PTD26__NF_IO10 0x28df
+ VF610_PAD_PTD25__NF_IO9 0x28df
+ VF610_PAD_PTD24__NF_IO8 0x28df
+ VF610_PAD_PTD23__NF_IO7 0x28df
+ VF610_PAD_PTD22__NF_IO6 0x28df
+ VF610_PAD_PTD21__NF_IO5 0x28df
+ VF610_PAD_PTD20__NF_IO4 0x28df
+ VF610_PAD_PTD19__NF_IO3 0x28df
+ VF610_PAD_PTD18__NF_IO2 0x28df
+ VF610_PAD_PTD17__NF_IO1 0x28df
+ VF610_PAD_PTD16__NF_IO0 0x28df
+ VF610_PAD_PTB24__NF_WE_B 0x28c2
+ VF610_PAD_PTB25__NF_CE0_B 0x28c2
+ VF610_PAD_PTB27__NF_RE_B 0x28c2
+ VF610_PAD_PTC26__NF_RB_B 0x283d
+ VF610_PAD_PTC27__NF_ALE 0x28c2
+ VF610_PAD_PTC28__NF_CLE 0x28c2
+ >;
+ };
+
+ pinctrl_pwm0: pwm0grp {
+ fsl,pins = <
+ VF610_PAD_PTB0__FTM0_CH0 0x1582
+ VF610_PAD_PTB1__FTM0_CH1 0x1582
+ VF610_PAD_PTB2__FTM0_CH2 0x1582
+ VF610_PAD_PTB3__FTM0_CH3 0x1582
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ VF610_PAD_PTA16__SAI2_TX_BCLK 0x02ed
+ VF610_PAD_PTA18__SAI2_TX_DATA 0x02ee
+ VF610_PAD_PTA19__SAI2_TX_SYNC 0x02ed
+ VF610_PAD_PTA21__SAI2_RX_BCLK 0x02ed
+ VF610_PAD_PTA22__SAI2_RX_DATA 0x02ed
+ VF610_PAD_PTA23__SAI2_RX_SYNC 0x02ed
+ VF610_PAD_PTB18__EXT_AUDIO_MCLK 0x02ed
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ VF610_PAD_PTB4__UART1_TX 0x21a2
+ VF610_PAD_PTB5__UART1_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ VF610_PAD_PTB6__UART2_TX 0x21a2
+ VF610_PAD_PTB7__UART2_RX 0x21a1
+ >;
+ };
+ };
+};
+
+&nfc {
+ assigned-clocks = <&clks VF610_CLK_NFC>;
+ assigned-clock-rates = <33000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nfc>;
+ status = "okay";
+
+ nand@0 {
+ compatible = "fsl,vf610-nfc-nandcs";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nand-bus-width = <16>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <2048>;
+ nand-on-flash-bbt;
+ };
+};
+
+&pwm0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0>;
+ status = "okay";
+};
+
+&sai2 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbdev0 {
+ disable-over-current;
+ status = "okay";
+};
+
+&usbh1 {
+ disable-over-current;
+ status = "okay";
+};
+
+&usbmisc0 {
+ status = "okay";
+};
+
+&usbmisc1 {
+ status = "okay";
+};
+
+&usbphy0 {
+ status = "okay";
+};
+
+&usbphy1 {
+ status = "okay";
+};
diff --git a/src/arm/nxp/vf/vf610-zii-cfu1.dts b/src/arm/nxp/vf/vf610-zii-cfu1.dts
new file mode 100644
index 0000000..1a19aec
--- /dev/null
+++ b/src/arm/nxp/vf/vf610-zii-cfu1.dts
@@ -0,0 +1,368 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Copyright (C) 2018 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+ model = "ZII VF610 CFU1 Board";
+ compatible = "zii,vf610cfu1", "zii,vf610dev", "fsl,vf610";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pinctrl_leds_debug>;
+ pinctrl-names = "default";
+
+ led-debug {
+ label = "zii:green:debug1";
+ gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-fail {
+ label = "zii:red:fail";
+ gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led-status {
+ label = "zii:green:status";
+ gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-debug-a {
+ label = "zii:green:debug_a";
+ gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-debug-b {
+ label = "zii:green:debug_b";
+ gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3_mcu";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ sff: sfp {
+ compatible = "sff,sff";
+ pinctrl-0 = <&pinctrl_optical>;
+ pinctrl-names = "default";
+ i2c-bus = <&i2c0>;
+ los-gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ supply-voltage-monitor {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 8>, /* 28VDC_IN */
+ <&adc0 9>, /* +3.3V */
+ <&adc1 8>, /* VCC_1V5 */
+ <&adc1 9>; /* VCC_1V2 */
+ };
+};
+
+&adc0 {
+ vref-supply = <®_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&adc1 {
+ vref-supply = <®_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&dspi1 {
+ bus-num = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dspi1>;
+ /*
+ * Some CFU1s come with SPI-NOR chip DNPed, so we leave this
+ * node disabled by default and rely on bootloader to enable
+ * it when appropriate.
+ */
+ status = "disabled";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p128", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partition@0 {
+ label = "m25p128-0";
+ reg = <0x0 0x01000000>;
+ };
+ };
+};
+
+&edma0 {
+ status = "okay";
+};
+
+&edma1 {
+ status = "okay";
+};
+
+&esdhc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc0>;
+ bus-width = <8>;
+ non-removable;
+ no-1-8-v;
+ keep-power-in-suspend;
+ no-sdio;
+ no-sd;
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ no-sdio;
+ status = "okay";
+};
+
+&fec1 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ status = "okay";
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+
+ mdio1: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <12500000>;
+ suppress-preamble;
+ status = "okay";
+
+ switch0: switch0@0 {
+ compatible = "marvell,mv88e6085";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_switch>;
+ reg = <0>;
+ eeprom-length = <512>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "eth_cu_1000_1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "eth_cu_1000_2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "eth_cu_1000_3";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "eth_fc_1000_1";
+ phy-mode = "1000base-x";
+ managed = "in-band-status";
+ sfp = <&sff>;
+ };
+
+ port@6 {
+ reg = <6>;
+ phy-mode = "rmii";
+ ethernet = <&fec1>;
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ status = "okay";
+
+ io-expander@22 {
+ compatible = "nxp,pca9554";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ lm75@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c04";
+ reg = <0x52>;
+ label = "nvm";
+ };
+
+ eeprom@54 {
+ compatible = "atmel,24c04";
+ reg = <0x54>;
+ label = "nameplate";
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ watchdog@38 {
+ compatible = "zii,rave-wdt";
+ reg = <0x38>;
+ };
+};
+
+&snvsrtc {
+ status = "disabled";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_dspi1: dspi1grp {
+ fsl,pins = <
+ VF610_PAD_PTD5__DSPI1_CS0 0x1182
+ VF610_PAD_PTC6__DSPI1_SIN 0x1181
+ VF610_PAD_PTC7__DSPI1_SOUT 0x1182
+ VF610_PAD_PTC8__DSPI1_SCK 0x1182
+ >;
+ };
+
+ pinctrl_esdhc0: esdhc0grp {
+ fsl,pins = <
+ VF610_PAD_PTC0__ESDHC0_CLK 0x31ef
+ VF610_PAD_PTC1__ESDHC0_CMD 0x31ef
+ VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef
+ VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef
+ VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef
+ VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef
+ VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef
+ VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef
+ VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef
+ VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTA6__RMII_CLKIN 0x30d1
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30fe
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_i2c0: i2c0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__I2C0_SCL 0x37ff
+ VF610_PAD_PTB15__I2C0_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ VF610_PAD_PTB16__I2C1_SCL 0x37ff
+ VF610_PAD_PTB17__I2C1_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_leds_debug: pinctrl-leds-debug {
+ fsl,pins = <
+ VF610_PAD_PTD3__GPIO_82 0x31c2
+ VF610_PAD_PTE3__GPIO_108 0x31c2
+ VF610_PAD_PTE4__GPIO_109 0x31c2
+ VF610_PAD_PTE5__GPIO_110 0x31c2
+ VF610_PAD_PTE6__GPIO_111 0x31c2
+ >;
+ };
+
+ pinctrl_optical: optical-grp {
+ fsl,pins = <
+ /* SFF SD input */
+ VF610_PAD_PTE27__GPIO_132 0x3061
+
+ /* SFF Transmit disable output */
+ VF610_PAD_PTE13__GPIO_118 0x3043
+ >;
+ };
+
+ pinctrl_switch: switch-grp {
+ fsl,pins = <
+ VF610_PAD_PTB28__GPIO_98 0x3061
+ >;
+ };
+
+ pinctrl_uart0: uart0grp {
+ fsl,pins = <
+ VF610_PAD_PTB10__UART0_TX 0x21a2
+ VF610_PAD_PTB11__UART0_RX 0x21a1
+ >;
+ };
+};
diff --git a/src/arm/nxp/vf/vf610-zii-dev-rev-b.dts b/src/arm/nxp/vf/vf610-zii-dev-rev-b.dts
new file mode 100644
index 0000000..16b4e06
--- /dev/null
+++ b/src/arm/nxp/vf/vf610-zii-dev-rev-b.dts
@@ -0,0 +1,444 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2015, 2016 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include "vf610-zii-dev.dtsi"
+
+/ {
+ model = "ZII VF610 Development Board, Rev B";
+ compatible = "zii,vf610dev-b", "zii,vf610dev", "fsl,vf610";
+
+ mdio-mux {
+ compatible = "mdio-mux-gpio";
+ pinctrl-0 = <&pinctrl_mdio_mux>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH
+ &gpio0 9 GPIO_ACTIVE_HIGH
+ &gpio0 24 GPIO_ACTIVE_HIGH
+ &gpio0 25 GPIO_ACTIVE_HIGH>;
+ mdio-parent-bus = <&mdio1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio_mux_1: mdio@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0: switch@0 {
+ compatible = "marvell,mv88e6085";
+ pinctrl-0 = <&pinctrl_gpio_switch0>;
+ pinctrl-names = "default";
+ reg = <0>;
+ dsa,member = <0 0>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ eeprom-length = <512>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan0";
+ phy-handle = <&switch0phy0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ phy-handle = <&switch0phy1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ phy-handle = <&switch0phy2>;
+ };
+
+ switch0port5: port@5 {
+ reg = <5>;
+ label = "dsa";
+ phy-mode = "rgmii-txid";
+ link = <&switch1port6
+ &switch2port9>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@6 {
+ reg = <6>;
+ phy-mode = "rmii";
+ ethernet = <&fec1>;
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+ };
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ switch0phy0: switch0phy0@0 {
+ reg = <0>;
+ interrupt-parent = <&switch0>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ switch0phy1: switch1phy0@1 {
+ reg = <1>;
+ interrupt-parent = <&switch0>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ switch0phy2: switch1phy0@2 {
+ reg = <2>;
+ interrupt-parent = <&switch0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+ };
+
+ mdio_mux_2: mdio@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch1: switch@0 {
+ compatible = "marvell,mv88e6085";
+ pinctrl-0 = <&pinctrl_gpio_switch1>;
+ pinctrl-names = "default";
+ reg = <0>;
+ dsa,member = <0 1>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ eeprom-length = <512>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan3";
+ phy-handle = <&switch1phy0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan4";
+ phy-handle = <&switch1phy1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan5";
+ phy-handle = <&switch1phy2>;
+ };
+
+ switch1port5: port@5 {
+ reg = <5>;
+ label = "dsa";
+ link = <&switch2port9>;
+ phy-mode = "1000base-x";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ switch1port6: port@6 {
+ reg = <6>;
+ label = "dsa";
+ phy-mode = "rgmii-txid";
+ link = <&switch0port5>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch1phy0: switch1phy0@0 {
+ reg = <0>;
+ interrupt-parent = <&switch1>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ switch1phy1: switch1phy0@1 {
+ reg = <1>;
+ interrupt-parent = <&switch1>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ switch1phy2: switch1phy0@2 {
+ reg = <2>;
+ interrupt-parent = <&switch1>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+ };
+
+ mdio_mux_4: mdio@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ switch2: switch@0 {
+ compatible = "marvell,mv88e6085";
+ reg = <0>;
+ dsa,member = <0 2>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan6";
+ phy-handle = <&switch2phy0>;
+ phy-mode = "sgmii";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan7";
+ phy-handle = <&switch2phy1>;
+ phy-mode = "sgmii";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan8";
+ phy-handle = <&switch2phy2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "optical3";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ link-gpios = <&gpio6 2
+ GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "optical4";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ link-gpios = <&gpio6 3
+ GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ switch2port9: port@9 {
+ reg = <9>;
+ label = "dsa";
+ phy-mode = "1000base-x";
+ link = <&switch1port5
+ &switch0port5>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch2phy0: phy@0 {
+ reg = <0>;
+ };
+ switch2phy1: phy@1 {
+ reg = <1>;
+ };
+ switch2phy2: phy@2 {
+ reg = <2>;
+ };
+ };
+ };
+ };
+
+ mdio_mux_8: mdio@8 {
+ reg = <8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ spi-0 {
+ compatible = "spi-gpio";
+ pinctrl-0 = <&pinctrl_gpio_spi0>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW
+ &gpio1 8 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <2>;
+
+ flash@0 {
+ compatible = "m25p128", "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+
+ at93c46d@1 {
+ compatible = "atmel,at93c46d";
+ pinctrl-0 = <&pinctrl_gpio_e6185_eeprom_sel>;
+ pinctrl-names = "default";
+ reg = <1>;
+ spi-max-frequency = <500000>;
+ spi-cs-high;
+ data-size = <16>;
+ select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&i2c0 {
+ gpio5: io-expander@20 {
+ compatible = "nxp,pca9554";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ };
+
+ gpio6: io-expander@22 {
+ compatible = "nxp,pca9554";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pca9554_22>;
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ interrupt-parent = <&gpio3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c2 {
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ pinctrl-0 = <&pinctrl_i2c_mux_reset>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ sfp1: eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ sfp2: eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ sfp3: eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ sfp4: eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+ };
+};
+
+&mdio1 {
+ clock-frequency = <5000000>;
+};
+
+&iomuxc {
+ pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 {
+ fsl,pins = <
+ VF610_PAD_PTE27__GPIO_132 0x33e2
+ >;
+ };
+
+ pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
+ fsl,pins = <
+ VF610_PAD_PTB22__GPIO_44 0x33e2
+ VF610_PAD_PTB21__GPIO_43 0x33e2
+ VF610_PAD_PTB20__GPIO_42 0x33e1
+ VF610_PAD_PTB19__GPIO_41 0x33e2
+ VF610_PAD_PTB18__GPIO_40 0x33e2
+ >;
+ };
+
+ pinctrl_mdio_mux: pinctrl-mdio-mux {
+ fsl,pins = <
+ VF610_PAD_PTA18__GPIO_8 0x31c2
+ VF610_PAD_PTA19__GPIO_9 0x31c2
+ VF610_PAD_PTB2__GPIO_24 0x31c2
+ VF610_PAD_PTB3__GPIO_25 0x31c2
+ >;
+ };
+
+ pinctrl_pca9554_22: pinctrl-pca95540-22 {
+ fsl,pins = <
+ VF610_PAD_PTB28__GPIO_98 0x219d
+ >;
+ };
+};
diff --git a/src/arm/nxp/vf/vf610-zii-dev-rev-c.dts b/src/arm/nxp/vf/vf610-zii-dev-rev-c.dts
new file mode 100644
index 0000000..6f9878f
--- /dev/null
+++ b/src/arm/nxp/vf/vf610-zii-dev-rev-c.dts
@@ -0,0 +1,466 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2015, 2016 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include "vf610-zii-dev.dtsi"
+
+/ {
+ model = "ZII VF610 Development Board, Rev C";
+ compatible = "zii,vf610dev-c", "zii,vf610dev", "fsl,vf610";
+
+ mdio-mux {
+ compatible = "mdio-mux-gpio";
+ pinctrl-0 = <&pinctrl_mdio_mux>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH
+ &gpio0 9 GPIO_ACTIVE_HIGH
+ &gpio0 25 GPIO_ACTIVE_HIGH>;
+ mdio-parent-bus = <&mdio1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio_mux_1: mdio@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0: switch@0 {
+ compatible = "marvell,mv88e6190";
+ pinctrl-0 = <&pinctrl_gpio_switch0>;
+ pinctrl-names = "default";
+ reg = <0>;
+ dsa,member = <0 0>;
+ eeprom-length = <65536>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ phy-mode = "rmii";
+ ethernet = <&fec1>;
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ phy-handle = <&switch0phy1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ phy-handle = <&switch0phy2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ phy-handle = <&switch0phy3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan4";
+ phy-handle = <&switch0phy4>;
+ };
+
+ switch0port10: port@10 {
+ reg = <10>;
+ label = "dsa";
+ phy-mode = "xaui";
+ link = <&switch1port10>;
+
+ fixed-link {
+ speed = <10000>;
+ full-duplex;
+ };
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0phy1: switch0phy@1 {
+ reg = <1>;
+ interrupt-parent = <&switch0>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ switch0phy2: switch0phy@2 {
+ reg = <2>;
+ interrupt-parent = <&switch0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ switch0phy3: switch0phy@3 {
+ reg = <3>;
+ interrupt-parent = <&switch0>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ switch0phy4: switch0phy@4 {
+ reg = <4>;
+ interrupt-parent = <&switch0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+ };
+
+ mdio_mux_2: mdio@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch1: switch@0 {
+ compatible = "marvell,mv88e6190";
+ pinctrl-0 = <&pinctrl_gpio_switch1>;
+ pinctrl-names = "default";
+ reg = <0>;
+ dsa,member = <0 1>;
+ eeprom-length = <65536>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ label = "lan5";
+ phy-handle = <&switch1phy1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan6";
+ phy-handle = <&switch1phy2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan7";
+ phy-handle = <&switch1phy3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan8";
+ phy-handle = <&switch1phy4>;
+ };
+
+ port@9 {
+ reg = <9>;
+ label = "sff2";
+ phy-mode = "1000base-x";
+ managed = "in-band-status";
+ sfp = <&sff2>;
+ };
+
+ switch1port10: port@10 {
+ reg = <10>;
+ label = "dsa";
+ phy-mode = "xaui";
+ link = <&switch0port10>;
+
+ fixed-link {
+ speed = <10000>;
+ full-duplex;
+ };
+ };
+ };
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch1phy1: switch1phy@1 {
+ reg = <1>;
+ interrupt-parent = <&switch1>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ switch1phy2: switch1phy@2 {
+ reg = <2>;
+ interrupt-parent = <&switch1>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ switch1phy3: switch1phy@3 {
+ reg = <3>;
+ interrupt-parent = <&switch1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ switch1phy4: switch1phy@4 {
+ reg = <4>;
+ interrupt-parent = <&switch1>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+ };
+
+ mdio_mux_4: mdio@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ sff2: sff2 {
+ /* lower */
+ compatible = "sff,sff";
+ i2c-bus = <&sff2_i2c>;
+ los-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ sff3: sff3 {
+ /* upper */
+ compatible = "sff,sff";
+ i2c-bus = <&sff3_i2c>;
+ los-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&dspi0 {
+ bus-num = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dspi0>;
+ status = "okay";
+ spi-num-chipselects = <2>;
+
+ flash@0 {
+ compatible = "m25p128", "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+
+ atzb-rf-233@1 {
+ compatible = "atmel,at86rf233";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctr_atzb_rf_233>;
+
+ spi-max-frequency = <7500000>;
+ reg = <1>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gpio3>;
+ xtal-trim = /bits/ 8 <0x06>;
+
+ sleep-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+ reset-gpio = <&gpio6 10 GPIO_ACTIVE_LOW>;
+
+ fsl,spi-cs-sck-delay = <180>;
+ fsl,spi-sck-cs-delay = <250>;
+ };
+};
+
+&i2c0 {
+ /*
+ * U712
+ *
+ * Exposed signals:
+ * P1 - WE2_CMD
+ * P2 - WE2_CLK
+ */
+ gpio5: io-expander@18 {
+ compatible = "nxp,pca9557";
+ reg = <0x18>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ /*
+ * U121
+ *
+ * Exposed signals:
+ * I/O0 - ENET_SWR_EN
+ * I/O1 - ESW1_RESETn
+ * I/O2 - ARINC_RESET
+ * I/O3 - DD1_IO_RESET
+ * I/O4 - ESW2_RESETn
+ * I/O5 - ESW3_RESETn
+ * I/O6 - ESW4_RESETn
+ * I/O8 - TP909
+ * I/O9 - FEM_SEL
+ * I/O10 - WIFI_RESETn
+ * I/O11 - PHY_RSTn
+ * I/O12 - OPT1_SD
+ * I/O13 - OPT2_SD
+ * I/O14 - OPT1_TX_DIS
+ * I/O15 - OPT2_TX_DIS
+ */
+ gpio6: sx1503@20 {
+ compatible = "semtech,sx1503q";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sx1503_20>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ /*
+ * U715
+ *
+ * Exposed signals:
+ * IO0 - WE1_CLK
+ * IO1 - WE1_CMD
+ */
+ gpio7: io-expander@22 {
+ compatible = "nxp,pca9554";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ };
+};
+
+&i2c1 {
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ read-only;
+ };
+};
+
+&i2c2 {
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ pinctrl-0 = <&pinctrl_i2c_mux_reset>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ sff2_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ sff3_i2c: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&gpio0 {
+ eth0_intrp {
+ gpio-hog;
+ gpios = <23 GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "sx1503-irq";
+ };
+};
+
+&gpio3 {
+ eth0_intrp {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "eth0-intrp";
+ };
+};
+
+&fec0 {
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec0_phy_int>;
+
+ interrupt-parent = <&gpio3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ reg = <0>;
+ };
+ };
+};
+
+&iomuxc {
+ pinctr_atzb_rf_233: pinctrl-atzb-rf-233 {
+ fsl,pins = <
+ VF610_PAD_PTB2__GPIO_24 0x31c2
+ VF610_PAD_PTE27__GPIO_132 0x33e2
+ >;
+ };
+
+
+ pinctrl_sx1503_20: pinctrl-sx1503-20 {
+ fsl,pins = <
+ VF610_PAD_PTB1__GPIO_23 0x219d
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ VF610_PAD_PTA20__UART3_TX 0x21a2
+ VF610_PAD_PTA21__UART3_RX 0x21a1
+ >;
+ };
+
+ pinctrl_mdio_mux: pinctrl-mdio-mux {
+ fsl,pins = <
+ VF610_PAD_PTA18__GPIO_8 0x31c2
+ VF610_PAD_PTA19__GPIO_9 0x31c2
+ VF610_PAD_PTB3__GPIO_25 0x31c2
+ >;
+ };
+
+ pinctrl_fec0_phy_int: pinctrl-fec0-phy-int {
+ fsl,pins = <
+ VF610_PAD_PTB28__GPIO_98 0x219d
+ >;
+ };
+};
diff --git a/src/arm/nxp/vf/vf610-zii-dev.dtsi b/src/arm/nxp/vf/vf610-zii-dev.dtsi
new file mode 100644
index 0000000..ce5e528
--- /dev/null
+++ b/src/arm/nxp/vf/vf610-zii-dev.dtsi
@@ -0,0 +1,450 @@
+/*
+ * Copyright (C) 2015, 2016 Zodiac Inflight Innovations
+ *
+ * Based on an original 'vf610-twr.dts' which is Copyright 2015,
+ * Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "vf610.dtsi"
+
+/ {
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pinctrl_leds_debug>;
+ pinctrl-names = "default";
+
+ led-debug {
+ label = "zii:green:debug1";
+ gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3_mcu";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ usb0_vbus: regulator-usb0-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-0 = <&pinctrl_usb_vbus>;
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 6 0>;
+ };
+
+ supply-voltage-monitor {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 8>, /* VCC_1V5 */
+ <&adc0 9>, /* VCC_1V8 */
+ <&adc1 8>, /* VCC_1V0 */
+ <&adc1 9>; /* VCC_1V2 */
+ };
+};
+
+&adc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_ad5>;
+ vref-supply = <®_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&edma0 {
+ status = "okay";
+};
+
+&edma1 {
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&fec0 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec0>;
+ status = "okay";
+};
+
+&fec1 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ status = "okay";
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+
+ mdio1: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <12500000>;
+ suppress-preamble;
+ status = "okay";
+ };
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ lm75@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c04";
+ reg = <0x50>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c04";
+ reg = <0x52>;
+ };
+
+ ds1682@6b {
+ compatible = "dallas,ds1682";
+ reg = <0x6b>;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&qspi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi0>;
+ status = "okay";
+
+ /*
+ * Attached MT25QL02 can go up to 90Mhz in DTR and 166 in STR
+ * modes, so, spi-max-frequency is limited to 90MHz
+ */
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <90000000>;
+ spi-rx-bus-width = <4>;
+ reg = <0>;
+ m25p,fast-read;
+ };
+
+ flash@2 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <90000000>;
+ spi-rx-bus-width = <4>;
+ reg = <2>;
+ m25p,fast-read;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbdev0 {
+ disable-over-current;
+ vbus-supply = <&usb0_vbus>;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbh1 {
+ disable-over-current;
+ status = "okay";
+};
+
+&usbmisc0 {
+ status = "okay";
+};
+
+&usbmisc1 {
+ status = "okay";
+};
+
+&usbphy0 {
+ status = "okay";
+};
+
+&usbphy1 {
+ status = "okay";
+};
+
+&tempsensor {
+ io-channels = <&adc0 16>;
+};
+
+&iomuxc {
+ pinctrl_adc0_ad5: adc0ad5grp {
+ fsl,pins = <
+ VF610_PAD_PTC30__ADC0_SE5 0x00a1
+ >;
+ };
+
+ pinctrl_dspi0: dspi0grp {
+ fsl,pins = <
+ VF610_PAD_PTB18__DSPI0_CS1 0x1182
+ VF610_PAD_PTB19__DSPI0_CS0 0x1182
+ VF610_PAD_PTB20__DSPI0_SIN 0x1181
+ VF610_PAD_PTB21__DSPI0_SOUT 0x1182
+ VF610_PAD_PTB22__DSPI0_SCK 0x1182
+ >;
+ };
+
+ pinctrl_dspi2: dspi2grp {
+ fsl,pins = <
+ VF610_PAD_PTD31__DSPI2_CS1 0x1182
+ VF610_PAD_PTD30__DSPI2_CS0 0x1182
+ VF610_PAD_PTD29__DSPI2_SIN 0x1181
+ VF610_PAD_PTD28__DSPI2_SOUT 0x1182
+ VF610_PAD_PTD27__DSPI2_SCK 0x1182
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ VF610_PAD_PTA7__GPIO_134 0x219d
+ >;
+ };
+
+ pinctrl_fec0: fec0grp {
+ fsl,pins = <
+ VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d2
+ VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d3
+ VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1
+ VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1
+ VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1
+ VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1
+ VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2
+ VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2
+ VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTA6__RMII_CLKIN 0x30d1
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
+ fsl,pins = <
+ VF610_PAD_PTB22__GPIO_44 0x33e2
+ VF610_PAD_PTB21__GPIO_43 0x33e2
+ VF610_PAD_PTB20__GPIO_42 0x33e1
+ VF610_PAD_PTB19__GPIO_41 0x33e2
+ VF610_PAD_PTB18__GPIO_40 0x33e2
+ >;
+ };
+
+ pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+ fsl,pins = <
+ VF610_PAD_PTB5__GPIO_27 0x219d
+ >;
+ };
+
+ pinctrl_gpio_switch1: pinctrl-gpio-switch1 {
+ fsl,pins = <
+ VF610_PAD_PTB4__GPIO_26 0x219d
+ >;
+ };
+
+ pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset {
+ fsl,pins = <
+ VF610_PAD_PTE14__GPIO_119 0x31c2
+ >;
+ };
+
+ pinctrl_i2c0: i2c0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__I2C0_SCL 0x37ff
+ VF610_PAD_PTB15__I2C0_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_i2c0_gpio: i2c0grp-gpio {
+ fsl,pins = <
+ VF610_PAD_PTB14__GPIO_36 0x31c2
+ VF610_PAD_PTB15__GPIO_37 0x31c2
+ >;
+ };
+
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ VF610_PAD_PTB16__I2C1_SCL 0x37ff
+ VF610_PAD_PTB17__I2C1_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ VF610_PAD_PTA22__I2C2_SCL 0x37ff
+ VF610_PAD_PTA23__I2C2_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_leds_debug: pinctrl-leds-debug {
+ fsl,pins = <
+ VF610_PAD_PTD20__GPIO_74 0x31c2
+ >;
+ };
+
+ pinctrl_qspi0: qspi0grp {
+ fsl,pins = <
+ VF610_PAD_PTD0__QSPI0_A_QSCK 0x38c2
+ VF610_PAD_PTD1__QSPI0_A_CS0 0x38c2
+ VF610_PAD_PTD2__QSPI0_A_DATA3 0x38c3
+ VF610_PAD_PTD3__QSPI0_A_DATA2 0x38c3
+ VF610_PAD_PTD4__QSPI0_A_DATA1 0x38c3
+ VF610_PAD_PTD5__QSPI0_A_DATA0 0x38c3
+ VF610_PAD_PTD7__QSPI0_B_QSCK 0x38c2
+ VF610_PAD_PTD8__QSPI0_B_CS0 0x38c2
+ VF610_PAD_PTD9__QSPI0_B_DATA3 0x38c3
+ VF610_PAD_PTD10__QSPI0_B_DATA2 0x38c3
+ VF610_PAD_PTD11__QSPI0_B_DATA1 0x38c3
+ VF610_PAD_PTD12__QSPI0_B_DATA0 0x38c3
+ >;
+ };
+
+ pinctrl_uart0: uart0grp {
+ fsl,pins = <
+ VF610_PAD_PTB10__UART0_TX 0x21a2
+ VF610_PAD_PTB11__UART0_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ VF610_PAD_PTB23__UART1_TX 0x21a2
+ VF610_PAD_PTB24__UART1_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ VF610_PAD_PTD23__UART2_TX 0x21a2
+ VF610_PAD_PTD22__UART2_RX 0x21a1
+ >;
+ };
+
+ pinctrl_usb_vbus: pinctrl-usb-vbus {
+ fsl,pins = <
+ VF610_PAD_PTA16__GPIO_6 0x31c2
+ >;
+ };
+
+ pinctrl_usb0_host: usb0-host-grp {
+ fsl,pins = <
+ VF610_PAD_PTD6__GPIO_85 0x0062
+ >;
+ };
+};
diff --git a/src/arm/nxp/vf/vf610-zii-scu4-aib.dts b/src/arm/nxp/vf/vf610-zii-scu4-aib.dts
new file mode 100644
index 0000000..df13354
--- /dev/null
+++ b/src/arm/nxp/vf/vf610-zii-scu4-aib.dts
@@ -0,0 +1,876 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright (C) 2016-2018 Zodiac Inflight Innovations
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+ model = "ZII VF610 SCU4 AIB";
+ compatible = "zii,vf610scu4-aib", "zii,vf610dev", "fsl,vf610";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pinctrl_leds_debug>;
+ pinctrl-names = "default";
+
+ led-debug {
+ label = "zii:green:debug1";
+ gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ mdio-mux {
+ compatible = "mdio-mux-gpio";
+ pinctrl-0 = <&pinctrl_mdio_mux>;
+ pinctrl-names = "default";
+ gpios = <&gpio4 4 GPIO_ACTIVE_HIGH
+ &gpio4 5 GPIO_ACTIVE_HIGH
+ &gpio3 30 GPIO_ACTIVE_HIGH
+ &gpio3 31 GPIO_ACTIVE_HIGH>;
+ mdio-parent-bus = <&mdio1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio_mux_1: mdio@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0: switch0@0 {
+ compatible = "marvell,mv88e6190";
+ reg = <0>;
+ dsa,member = <0 0>;
+ eeprom-length = <65536>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ phy-mode = "rmii";
+ ethernet = <&fec1>;
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "aib2main_1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "aib2main_2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "eth_cu_1000_5";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "eth_cu_1000_6";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "eth_cu_1000_4";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "eth_cu_1000_7";
+ };
+
+ port@7 {
+ reg = <7>;
+ label = "modem_pic";
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ switch0port10: port@10 {
+ reg = <10>;
+ label = "dsa";
+ phy-mode = "xgmii";
+ link = <&switch1port10
+ &switch3port10
+ &switch2port10>;
+
+ fixed-link {
+ speed = <10000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
+
+ mdio_mux_2: mdio@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch1: switch1@0 {
+ compatible = "marvell,mv88e6190";
+ reg = <0>;
+ dsa,member = <0 1>;
+ eeprom-length = <65536>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ label = "eth_cu_1000_3";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "eth_cu_100_2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "eth_cu_100_3";
+ };
+
+ switch1port9: port@9 {
+ reg = <9>;
+ label = "dsa";
+ phy-mode = "xgmii";
+ link = <&switch3port10
+ &switch2port10>;
+
+ fixed-link {
+ speed = <10000>;
+ full-duplex;
+ };
+ };
+
+ switch1port10: port@10 {
+ reg = <10>;
+ label = "dsa";
+ phy-mode = "xgmii";
+ link = <&switch0port10>;
+
+ fixed-link {
+ speed = <10000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
+
+ mdio_mux_4: mdio@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch2: switch2@0 {
+ compatible = "marvell,mv88e6190";
+ reg = <0>;
+ dsa,member = <0 2>;
+ eeprom-length = <65536>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ reg = <2>;
+ label = "eth_fc_1000_2";
+ phy-mode = "1000base-x";
+ managed = "in-band-status";
+ sfp = <&sff1>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "eth_fc_1000_3";
+ phy-mode = "1000base-x";
+ managed = "in-band-status";
+ sfp = <&sff2>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "eth_fc_1000_4";
+ phy-mode = "1000base-x";
+ managed = "in-band-status";
+ sfp = <&sff3>;
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "eth_fc_1000_5";
+ phy-mode = "1000base-x";
+ managed = "in-band-status";
+ sfp = <&sff4>;
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "eth_fc_1000_6";
+ phy-mode = "1000base-x";
+ managed = "in-band-status";
+ sfp = <&sff5>;
+ };
+
+ port@7 {
+ reg = <7>;
+ label = "eth_fc_1000_7";
+ phy-mode = "1000base-x";
+ managed = "in-band-status";
+ sfp = <&sff6>;
+ };
+
+ port@9 {
+ reg = <9>;
+ label = "eth_fc_1000_1";
+ phy-mode = "1000base-x";
+ managed = "in-band-status";
+ sfp = <&sff0>;
+ };
+
+ switch2port10: port@10 {
+ reg = <10>;
+ label = "dsa";
+ phy-mode = "2500base-x";
+ link = <&switch3port9
+ &switch1port9
+ &switch0port10>;
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
+
+ mdio_mux_8: mdio@8 {
+ reg = <8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch3: switch3@0 {
+ compatible = "marvell,mv88e6190";
+ reg = <0>;
+ dsa,member = <0 3>;
+ eeprom-length = <65536>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ reg = <2>;
+ label = "eth_fc_1000_8";
+ phy-mode = "1000base-x";
+ managed = "in-band-status";
+ sfp = <&sff7>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "eth_fc_1000_9";
+ phy-mode = "1000base-x";
+ managed = "in-band-status";
+ sfp = <&sff8>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "eth_fc_1000_10";
+ phy-mode = "1000base-x";
+ managed = "in-band-status";
+ sfp = <&sff9>;
+ };
+
+ switch3port9: port@9 {
+ reg = <9>;
+ label = "dsa";
+ phy-mode = "2500base-x";
+ link = <&switch2port10>;
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ };
+ };
+
+ switch3port10: port@10 {
+ reg = <10>;
+ label = "dsa";
+ phy-mode = "xgmii";
+ link = <&switch1port9
+ &switch0port10>;
+
+ fixed-link {
+ speed = <10000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
+ };
+
+ sff0: sff0 {
+ compatible = "sff,sff";
+ i2c-bus = <&sff0_i2c>;
+ los-gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ sff1: sff1 {
+ compatible = "sff,sff";
+ i2c-bus = <&sff1_i2c>;
+ los-gpios = <&gpio9 1 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ sff2: sff2 {
+ compatible = "sff,sff";
+ i2c-bus = <&sff2_i2c>;
+ los-gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ sff3: sff3 {
+ compatible = "sff,sff";
+ i2c-bus = <&sff3_i2c>;
+ los-gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ sff4: sff4 {
+ compatible = "sff,sff";
+ i2c-bus = <&sff4_i2c>;
+ los-gpios = <&gpio9 4 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ sff5: sff5 {
+ compatible = "sff,sff";
+ i2c-bus = <&sff5_i2c>;
+ los-gpios = <&gpio9 5 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio7 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ sff6: sff6 {
+ compatible = "sff,sff";
+ i2c-bus = <&sff6_i2c>;
+ los-gpios = <&gpio9 6 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ sff7: sff7 {
+ compatible = "sff,sff";
+ i2c-bus = <&sff7_i2c>;
+ los-gpios = <&gpio9 7 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ sff8: sff8 {
+ compatible = "sff,sff";
+ i2c-bus = <&sff8_i2c>;
+ los-gpios = <&gpio9 8 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ sff9: sff9 {
+ compatible = "sff,sff";
+ i2c-bus = <&sff9_i2c>;
+ los-gpios = <&gpio9 9 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3_mcu";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&dspi0 {
+ pinctrl-0 = <&pinctrl_dspi0>;
+ pinctrl-names = "default";
+ bus-num = <0>;
+ status = "okay";
+
+ adc@5 {
+ compatible = "holt,hi8435";
+ reg = <5>;
+ gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&dspi1 {
+ bus-num = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dspi1>;
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partition@0 {
+ label = "m25p128-0";
+ reg = <0x0 0x01000000>;
+ };
+ };
+
+ flash@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <1>;
+ spi-max-frequency = <50000000>;
+
+ partition@0 {
+ label = "m25p128-1";
+ reg = <0x0 0x01000000>;
+ };
+ };
+};
+
+&adc0 {
+ vref-supply = <®_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&adc1 {
+ vref-supply = <®_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&edma0 {
+ status = "okay";
+};
+
+&edma1 {
+ status = "okay";
+};
+
+&esdhc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc0>;
+ bus-width = <8>;
+ non-removable;
+ no-1-8-v;
+ no-sd;
+ no-sdio;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ no-sdio;
+ status = "okay";
+};
+
+&fec1 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ status = "okay";
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+
+ mdio1: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ status = "okay";
+
+ gpio5: io-expander@20 {
+ compatible = "nxp,pca9554";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio6: io-expander@22 {
+ compatible = "nxp,pca9554";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ temp-sensor@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c04";
+ reg = <0x50>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c04";
+ reg = <0x52>;
+ };
+
+ elapsed-time-recorder@6b {
+ compatible = "dallas,ds1682";
+ reg = <0x6b>;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ watchdog@38 {
+ compatible = "zii,rave-wdt";
+ reg = <0x38>;
+ };
+
+ adc@4a {
+ compatible = "adi,adt7411";
+ reg = <0x4a>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ gpio9: io-expander@20 {
+ compatible = "semtech,sx1503q";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sx1503_20>;
+ #gpio-cells = <2>;
+ reg = <0x20>;
+ gpio-controller;
+ interrupt-parent = <&gpio1>;
+ interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+ temp-sensor@4e {
+ compatible = "national,lm75";
+ reg = <0x4e>;
+ };
+
+ temp-sensor@4f {
+ compatible = "national,lm75";
+ reg = <0x4f>;
+ };
+
+ gpio7: io-expander@23 {
+ compatible = "nxp,pca9555";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x23>;
+ };
+
+ adc@4a {
+ compatible = "adi,adt7411";
+ reg = <0x4a>;
+ };
+
+ eeprom@54 {
+ compatible = "atmel,24c08";
+ reg = <0x54>;
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ sff0_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ sff1_i2c: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ sff2_i2c: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ sff3_i2c: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ sff4_i2c: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+ };
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9548";
+ pinctrl-names = "default";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ sff5_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ sff6_i2c: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ sff7_i2c: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ sff8_i2c: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ sff9_i2c: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+ };
+};
+
+&snvsrtc {
+ status = "disabled";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "okay";
+};
+
+&uart1 {
+ linux,rs485-enabled-at-boot-time;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ linux,rs485-enabled-at-boot-time;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_dspi0: dspi0grp {
+ fsl,pins = <
+ VF610_PAD_PTB19__DSPI0_CS0 0x1182
+ VF610_PAD_PTB18__DSPI0_CS1 0x1182
+ VF610_PAD_PTB13__DSPI0_CS4 0x1182
+ VF610_PAD_PTB12__DSPI0_CS5 0x1182
+ VF610_PAD_PTB20__DSPI0_SIN 0x1181
+ VF610_PAD_PTB21__DSPI0_SOUT 0x1182
+ VF610_PAD_PTB22__DSPI0_SCK 0x1182
+ >;
+ };
+
+ pinctrl_dspi1: dspi1grp {
+ fsl,pins = <
+ VF610_PAD_PTD5__DSPI1_CS0 0x1182
+ VF610_PAD_PTD4__DSPI1_CS1 0x1182
+ VF610_PAD_PTC6__DSPI1_SIN 0x1181
+ VF610_PAD_PTC7__DSPI1_SOUT 0x1182
+ VF610_PAD_PTC8__DSPI1_SCK 0x1182
+ >;
+ };
+
+ pinctrl_dspi2: dspi2gpio {
+ fsl,pins = <
+ VF610_PAD_PTD30__GPIO_64 0x33e2
+ VF610_PAD_PTD29__GPIO_65 0x33e1
+ VF610_PAD_PTD28__GPIO_66 0x33e2
+ VF610_PAD_PTD27__GPIO_67 0x33e2
+ VF610_PAD_PTD26__GPIO_68 0x31c2
+ >;
+ };
+
+ pinctrl_esdhc0: esdhc0grp {
+ fsl,pins = <
+ VF610_PAD_PTC0__ESDHC0_CLK 0x31ef
+ VF610_PAD_PTC1__ESDHC0_CMD 0x31ef
+ VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef
+ VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef
+ VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef
+ VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef
+ VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef
+ VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef
+ VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef
+ VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTA6__RMII_CLKIN 0x30d1
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_i2c0: i2c0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__I2C0_SCL 0x37ff
+ VF610_PAD_PTB15__I2C0_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ VF610_PAD_PTB16__I2C1_SCL 0x37ff
+ VF610_PAD_PTB17__I2C1_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ VF610_PAD_PTA22__I2C2_SCL 0x37ff
+ VF610_PAD_PTA23__I2C2_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_leds_debug: pinctrl-leds-debug {
+ fsl,pins = <
+ VF610_PAD_PTB26__GPIO_96 0x31c2
+ >;
+ };
+
+ pinctrl_mdio_mux: pinctrl-mdio-mux {
+ fsl,pins = <
+ VF610_PAD_PTE27__GPIO_132 0x31c2
+ VF610_PAD_PTE28__GPIO_133 0x31c2
+ VF610_PAD_PTE21__GPIO_126 0x31c2
+ VF610_PAD_PTE22__GPIO_127 0x31c2
+ >;
+ };
+
+ pinctrl_qspi0: qspi0grp {
+ fsl,pins = <
+ VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3
+ VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff
+ VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3
+ VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3
+ VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3
+ VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3
+ >;
+ };
+
+ pinctrl_sx1503_20: pinctrl-sx1503-20 {
+ fsl,pins = <
+ VF610_PAD_PTD31__GPIO_63 0x219d
+ >;
+ };
+
+ pinctrl_uart0: uart0grp {
+ fsl,pins = <
+ VF610_PAD_PTB10__UART0_TX 0x21a2
+ VF610_PAD_PTB11__UART0_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ VF610_PAD_PTB23__UART1_TX 0x21a2
+ VF610_PAD_PTB24__UART1_RX 0x21a1
+ VF610_PAD_PTB25__UART1_RTS 0x21a2 /* Used as DE signal for the RS-485 transceiver */
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ VF610_PAD_PTD0__UART2_TX 0x21a2
+ VF610_PAD_PTD1__UART2_RX 0x21a1
+ VF610_PAD_PTD2__UART2_RTS 0x21a2 /* Used as DE signal for the RS-485 transceiver */
+ >;
+ };
+};
diff --git a/src/arm/nxp/vf/vf610-zii-spb4.dts b/src/arm/nxp/vf/vf610-zii-spb4.dts
new file mode 100644
index 0000000..1461804
--- /dev/null
+++ b/src/arm/nxp/vf/vf610-zii-spb4.dts
@@ -0,0 +1,379 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Device tree file for ZII's SPB4 board
+ *
+ * SPB - Seat Power Box
+ *
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+ model = "ZII VF610 SPB4 Board";
+ compatible = "zii,vf610spb4", "zii,vf610dev", "fsl,vf610";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pinctrl_leds_debug>;
+ pinctrl-names = "default";
+
+ led-debug {
+ label = "zii:green:debug1";
+ gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3_mcu";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ supply-voltage-monitor {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 8>, /* 28V_SW */
+ <&adc0 9>, /* +3.3V */
+ <&adc1 8>, /* VCC_1V5 */
+ <&adc1 9>; /* VCC_1V2 */
+ };
+};
+
+&adc0 {
+ vref-supply = <®_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&adc1 {
+ vref-supply = <®_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&dspi1 {
+ bus-num = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dspi1>;
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p128", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&edma0 {
+ status = "okay";
+};
+
+&edma1 {
+ status = "okay";
+};
+
+&esdhc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc0>;
+ bus-width = <8>;
+ non-removable;
+ no-1-8-v;
+ keep-power-in-suspend;
+ no-sdio;
+ no-sd;
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ no-sdio;
+ status = "okay";
+};
+
+&fec1 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ status = "okay";
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+
+ mdio1: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <12500000>;
+ suppress-preamble;
+ status = "okay";
+
+ switch0: switch0@0 {
+ compatible = "marvell,mv88e6190";
+ pinctrl-0 = <&pinctrl_gpio_switch0>;
+ pinctrl-names = "default";
+ reg = <0>;
+ eeprom-length = <65536>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ phy-mode = "rmii";
+ ethernet = <&fec1>;
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "eth_cu_1000_1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "eth_cu_1000_2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "eth_cu_1000_3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "eth_cu_1000_4";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "eth_cu_1000_5";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "eth_cu_1000_6";
+ };
+ };
+ };
+ };
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ status = "okay";
+
+ io-expander@22 {
+ compatible = "nxp,pca9554";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c04";
+ reg = <0x50>;
+ label = "nameplate";
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c04";
+ reg = <0x52>;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ watchdog@38 {
+ compatible = "zii,rave-wdt";
+ reg = <0x38>;
+ };
+};
+
+&snvsrtc {
+ status = "disabled";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+
+ mcu {
+ compatible = "zii,rave-sp-rdu2";
+ current-speed = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ watchdog {
+ compatible = "zii,rave-sp-watchdog";
+ };
+
+ eeprom@a3 {
+ compatible = "zii,rave-sp-eeprom";
+ reg = <0xa3 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ zii,eeprom-name = "main-eeprom";
+ };
+ };
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&wdoga5 {
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl_dspi1: dspi1grp {
+ fsl,pins = <
+ VF610_PAD_PTD5__DSPI1_CS0 0x1182
+ VF610_PAD_PTD4__DSPI1_CS1 0x1182
+ VF610_PAD_PTC6__DSPI1_SIN 0x1181
+ VF610_PAD_PTC7__DSPI1_SOUT 0x1182
+ VF610_PAD_PTC8__DSPI1_SCK 0x1182
+ >;
+ };
+
+ pinctrl_esdhc0: esdhc0grp {
+ fsl,pins = <
+ VF610_PAD_PTC0__ESDHC0_CLK 0x31ef
+ VF610_PAD_PTC1__ESDHC0_CMD 0x31ef
+ VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef
+ VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef
+ VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef
+ VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef
+ VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef
+ VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef
+ VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef
+ VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTA6__RMII_CLKIN 0x30d1
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+ fsl,pins = <
+ VF610_PAD_PTB28__GPIO_98 0x219d
+ >;
+ };
+
+ pinctrl_i2c0: i2c0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__I2C0_SCL 0x37ff
+ VF610_PAD_PTB15__I2C0_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ VF610_PAD_PTB16__I2C1_SCL 0x37ff
+ VF610_PAD_PTB17__I2C1_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_leds_debug: pinctrl-leds-debug {
+ fsl,pins = <
+ VF610_PAD_PTD3__GPIO_82 0x31c2
+ >;
+ };
+
+ pinctrl_uart0: uart0grp {
+ fsl,pins = <
+ VF610_PAD_PTB10__UART0_TX 0x21a2
+ VF610_PAD_PTB11__UART0_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ VF610_PAD_PTB23__UART1_TX 0x21a2
+ VF610_PAD_PTB24__UART1_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ VF610_PAD_PTD0__UART2_TX 0x21a2
+ VF610_PAD_PTD1__UART2_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ VF610_PAD_PTA30__UART3_TX 0x21a2
+ VF610_PAD_PTA31__UART3_RX 0x21a1
+ >;
+ };
+};
diff --git a/src/arm/nxp/vf/vf610-zii-ssmb-dtu.dts b/src/arm/nxp/vf/vf610-zii-ssmb-dtu.dts
new file mode 100644
index 0000000..463c245
--- /dev/null
+++ b/src/arm/nxp/vf/vf610-zii-ssmb-dtu.dts
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Device tree file for ZII's SSMB DTU board
+ *
+ * SSMB - SPU3 Switch Management Board
+ * DTU - Digital Tapping Unit
+ *
+ * Copyright (C) 2015-2019 Zodiac Inflight Innovations
+ *
+ * Based on an original 'vf610-twr.dts' which is Copyright 2015,
+ * Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+ model = "ZII VF610 SSMB DTU Board";
+ compatible = "zii,vf610dtu", "zii,vf610dev", "fsl,vf610";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pinctrl_leds_debug>;
+ pinctrl-names = "default";
+
+ led-debug {
+ label = "zii:green:debug1";
+ gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ reg_vcc_3v3_mcu: regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3_mcu";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ supply-voltage-monitor {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 8>, /* 12V_MAIN */
+ <&adc0 9>, /* +3.3V */
+ <&adc1 8>, /* VCC_1V5 */
+ <&adc1 9>; /* VCC_1V2 */
+ };
+};
+
+&adc0 {
+ vref-supply = <®_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&adc1 {
+ vref-supply = <®_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&edma0 {
+ status = "okay";
+};
+
+&edma1 {
+ status = "okay";
+};
+
+&esdhc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc0>;
+ bus-width = <8>;
+ non-removable;
+ no-1-8-v;
+ keep-power-in-suspend;
+ no-sdio;
+ no-sd;
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ no-sdio;
+ status = "okay";
+};
+
+&fec1 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ status = "okay";
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+
+ mdio1: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <12500000>;
+ suppress-preamble;
+ status = "okay";
+
+ switch0: switch0@0 {
+ compatible = "marvell,mv88e6190";
+ pinctrl-0 = <&pinctrl_gpio_switch0>;
+ pinctrl-names = "default";
+ reg = <0>;
+ eeprom-length = <65536>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ phy-mode = "rmii";
+ ethernet = <&fec1>;
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "eth_cu_100_3";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "eth_cu_1000_4";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "eth_cu_1000_5";
+ };
+
+ port@8 {
+ reg = <8>;
+ label = "eth_cu_1000_1";
+ };
+
+ port@9 {
+ reg = <9>;
+ label = "eth_cu_1000_2";
+ phy-handle = <&phy9>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ };
+ };
+
+ mdio1 {
+ compatible = "marvell,mv88e6xxx-mdio-external";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy9: phy9@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ pinctrl-0 = <&pinctrl_gpio_phy9>;
+ pinctrl-names = "default";
+ interrupt-parent = <&gpio2>;
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+ reg = <0>;
+ };
+ };
+ };
+ };
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ status = "okay";
+
+ gpio6: gpio-expander@22 {
+ compatible = "nxp,pca9554";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ /* On SSMB */
+ temperature-sensor@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+
+ /* On DSB */
+ temperature-sensor@4d {
+ compatible = "national,lm75";
+ reg = <0x4d>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c04";
+ reg = <0x50>;
+ label = "nameplate";
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c04";
+ reg = <0x52>;
+ };
+};
+
+&snvsrtc {
+ status = "disabled";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_dspi1: dspi1grp {
+ fsl,pins = <
+ VF610_PAD_PTD5__DSPI1_CS0 0x1182
+ VF610_PAD_PTD4__DSPI1_CS1 0x1182
+ VF610_PAD_PTC6__DSPI1_SIN 0x1181
+ VF610_PAD_PTC7__DSPI1_SOUT 0x1182
+ VF610_PAD_PTC8__DSPI1_SCK 0x1182
+ >;
+ };
+
+ pinctrl_esdhc0: esdhc0grp {
+ fsl,pins = <
+ VF610_PAD_PTC0__ESDHC0_CLK 0x31ef
+ VF610_PAD_PTC1__ESDHC0_CMD 0x31ef
+ VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef
+ VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef
+ VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef
+ VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef
+ VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef
+ VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef
+ VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef
+ VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTA6__RMII_CLKIN 0x30d1
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_gpio_phy9: pinctrl-gpio-phy9 {
+ fsl,pins = <
+ VF610_PAD_PTB24__GPIO_94 0x219d
+ >;
+ };
+
+ pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+ fsl,pins = <
+ VF610_PAD_PTB28__GPIO_98 0x219d
+ >;
+ };
+
+ pinctrl_i2c0: i2c0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__I2C0_SCL 0x37ff
+ VF610_PAD_PTB15__I2C0_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ VF610_PAD_PTB16__I2C1_SCL 0x37ff
+ VF610_PAD_PTB17__I2C1_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_leds_debug: pinctrl-leds-debug {
+ fsl,pins = <
+ VF610_PAD_PTD3__GPIO_82 0x31c2
+ >;
+ };
+
+ pinctrl_uart0: uart0grp {
+ fsl,pins = <
+ VF610_PAD_PTB10__UART0_TX 0x21a2
+ VF610_PAD_PTB11__UART0_RX 0x21a1
+ >;
+ };
+};
diff --git a/src/arm/nxp/vf/vf610-zii-ssmb-spu3.dts b/src/arm/nxp/vf/vf610-zii-ssmb-spu3.dts
new file mode 100644
index 0000000..f5ae0d5
--- /dev/null
+++ b/src/arm/nxp/vf/vf610-zii-ssmb-spu3.dts
@@ -0,0 +1,372 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Device tree file for ZII's SSMB SPU3 board
+ *
+ * SSMB - SPU3 Switch Management Board
+ * SPU - Seat Power Unit
+ *
+ * Copyright (C) 2015, 2016 Zodiac Inflight Innovations
+ *
+ * Based on an original 'vf610-twr.dts' which is Copyright 2015,
+ * Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+ model = "ZII VF610 SSMB SPU3 Board";
+ compatible = "zii,vf610spu3", "zii,vf610dev", "fsl,vf610";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pinctrl_leds_debug>;
+ pinctrl-names = "default";
+
+ led-debug {
+ label = "zii:green:debug1";
+ gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ reg_vcc_3v3_mcu: regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3_mcu";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ supply-voltage-monitor {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 8>, /* 12V_MAIN */
+ <&adc0 9>, /* +3.3V */
+ <&adc1 8>, /* VCC_1V5 */
+ <&adc1 9>; /* VCC_1V2 */
+ };
+};
+
+&adc0 {
+ vref-supply = <®_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&adc1 {
+ vref-supply = <®_vcc_3v3_mcu>;
+ status = "okay";
+};
+
+&dspi1 {
+ bus-num = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dspi1>;
+ /*
+ * Some SPU3s come with SPI-NOR chip DNPed, so we leave this
+ * node disabled by default and rely on bootloader to enable
+ * it when appropriate.
+ */
+ status = "disabled";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p128", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partition@0 {
+ label = "m25p128-0";
+ reg = <0x0 0x01000000>;
+ };
+ };
+};
+
+&edma0 {
+ status = "okay";
+};
+
+&edma1 {
+ status = "okay";
+};
+
+&esdhc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc0>;
+ bus-width = <8>;
+ non-removable;
+ no-1-8-v;
+ keep-power-in-suspend;
+ no-sdio;
+ no-sd;
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ no-sdio;
+ status = "okay";
+};
+
+&fec1 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ status = "okay";
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+
+ mdio1: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <12500000>;
+ suppress-preamble;
+ status = "okay";
+
+ switch0: switch0@0 {
+ compatible = "marvell,mv88e6190";
+ pinctrl-0 = <&pinctrl_gpio_switch0>;
+ pinctrl-names = "default";
+ reg = <0>;
+ eeprom-length = <65536>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ phy-mode = "rmii";
+ ethernet = <&fec1>;
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "eth_cu_1000_1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "eth_cu_1000_2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "eth_cu_1000_3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "eth_cu_1000_4";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "eth_cu_1000_5";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "eth_cu_1000_6";
+ };
+ };
+ };
+ };
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ status = "okay";
+
+ gpio6: io-expander@22 {
+ compatible = "nxp,pca9554";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ lm75@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c04";
+ reg = <0x50>;
+ label = "nameplate";
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c04";
+ reg = <0x52>;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ watchdog@38 {
+ compatible = "zii,rave-wdt";
+ reg = <0x38>;
+ };
+};
+
+&snvsrtc {
+ status = "disabled";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+
+ mcu {
+ compatible = "zii,rave-sp-rdu2";
+ current-speed = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ watchdog {
+ compatible = "zii,rave-sp-watchdog";
+ };
+
+ eeprom@a3 {
+ compatible = "zii,rave-sp-eeprom";
+ reg = <0xa3 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ zii,eeprom-name = "main-eeprom";
+ };
+ };
+};
+
+&wdoga5 {
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl_dspi1: dspi1grp {
+ fsl,pins = <
+ VF610_PAD_PTD5__DSPI1_CS0 0x1182
+ VF610_PAD_PTD4__DSPI1_CS1 0x1182
+ VF610_PAD_PTC6__DSPI1_SIN 0x1181
+ VF610_PAD_PTC7__DSPI1_SOUT 0x1182
+ VF610_PAD_PTC8__DSPI1_SCK 0x1182
+ >;
+ };
+
+ pinctrl_esdhc0: esdhc0grp {
+ fsl,pins = <
+ VF610_PAD_PTC0__ESDHC0_CLK 0x31ef
+ VF610_PAD_PTC1__ESDHC0_CMD 0x31ef
+ VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef
+ VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef
+ VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef
+ VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef
+ VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef
+ VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef
+ VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef
+ VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTA6__RMII_CLKIN 0x30d1
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+ fsl,pins = <
+ VF610_PAD_PTB28__GPIO_98 0x219d
+ >;
+ };
+
+ pinctrl_i2c0: i2c0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__I2C0_SCL 0x37ff
+ VF610_PAD_PTB15__I2C0_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ VF610_PAD_PTB16__I2C1_SCL 0x37ff
+ VF610_PAD_PTB17__I2C1_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_leds_debug: pinctrl-leds-debug {
+ fsl,pins = <
+ VF610_PAD_PTD3__GPIO_82 0x31c2
+ >;
+ };
+
+ pinctrl_uart0: uart0grp {
+ fsl,pins = <
+ VF610_PAD_PTB10__UART0_TX 0x21a2
+ VF610_PAD_PTB11__UART0_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ VF610_PAD_PTB23__UART1_TX 0x21a2
+ VF610_PAD_PTB24__UART1_RX 0x21a1
+ >;
+ };
+};
diff --git a/src/arm/nxp/vf/vf610.dtsi b/src/arm/nxp/vf/vf610.dtsi
new file mode 100644
index 0000000..2fba923
--- /dev/null
+++ b/src/arm/nxp/vf/vf610.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+#include "vf500.dtsi"
+
+&a5_cpu {
+ next-level-cache = <&L2>;
+};
+
+&aips0 {
+ L2: cache-controller@40006000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x40006000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ arm,data-latency = <3 3 3>;
+ arm,tag-latency = <2 2 2>;
+ };
+};
diff --git a/src/arm/nxp/vf/vf610m4-colibri.dts b/src/arm/nxp/vf/vf610m4-colibri.dts
new file mode 100644
index 0000000..2c2db47
--- /dev/null
+++ b/src/arm/nxp/vf/vf610m4-colibri.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Device tree for Colibri VF61 Cortex-M4 support
+ *
+ * Copyright (C) 2015 Stefan Agner
+ */
+
+/dts-v1/;
+#include "vf610m4.dtsi"
+
+/ {
+ model = "VF610 Cortex-M4";
+ compatible = "fsl,vf610m4";
+
+ chosen {
+ bootargs = "clk_ignore_unused init=/linuxrc rw";
+ stdout-path = "serial2:115200";
+ };
+
+ memory@8c000000 {
+ device_type = "memory";
+ reg = <0x8c000000 0x3000000>;
+ };
+};
+
+&gpio0 {
+ status = "disabled";
+};
+
+&gpio1 {
+ status = "disabled";
+};
+
+&gpio2 {
+ status = "disabled";
+};
+
+&gpio3 {
+ status = "disabled";
+};
+
+&gpio4 {
+ status = "disabled";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&iomuxc {
+ vf610-colibri {
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ VF610_PAD_PTD0__UART2_TX 0x21a2
+ VF610_PAD_PTD1__UART2_RX 0x21a1
+ VF610_PAD_PTD2__UART2_RTS 0x21a2
+ VF610_PAD_PTD3__UART2_CTS 0x21a1
+ >;
+ };
+ };
+};
diff --git a/src/arm/nxp/vf/vf610m4-cosmic.dts b/src/arm/nxp/vf/vf610m4-cosmic.dts
new file mode 100644
index 0000000..f7474c1
--- /dev/null
+++ b/src/arm/nxp/vf/vf610m4-cosmic.dts
@@ -0,0 +1,90 @@
+/*
+ * Device tree for Cosmic+ VF6xx Cortex-M4 support
+ *
+ * Copyright (C) 2015
+ *
+ * Based on vf610m4 Colibri
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "vf610m4.dtsi"
+
+/ {
+ model = "VF610 Cortex-M4";
+ compatible = "fsl,vf610m4";
+};
+
+&gpio0 {
+ status = "disabled";
+};
+
+&gpio1 {
+ status = "disabled";
+};
+
+&gpio2 {
+ status = "disabled";
+};
+
+&gpio3 {
+ status = "disabled";
+};
+
+&gpio4 {
+ status = "disabled";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&iomuxc {
+ vf610-cosmic {
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ VF610_PAD_PTA20__UART3_TX 0x21a2
+ VF610_PAD_PTA21__UART3_RX 0x21a1
+ >;
+ };
+ };
+};
diff --git a/src/arm/nxp/vf/vf610m4.dtsi b/src/arm/nxp/vf/vf610m4.dtsi
new file mode 100644
index 0000000..2bb331a
--- /dev/null
+++ b/src/arm/nxp/vf/vf610m4.dtsi
@@ -0,0 +1,57 @@
+/*
+ * Device tree for VF6xx Cortex-M4 support
+ *
+ * Copyright (C) 2015 Stefan Agner
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "../../armv7-m.dtsi"
+#include "vfxxx.dtsi"
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chosen { };
+ aliases { };
+};
+
+&mscm_ir {
+ interrupt-parent = <&nvic>;
+};
diff --git a/src/arm/nxp/vf/vfxxx.dtsi b/src/arm/nxp/vf/vfxxx.dtsi
new file mode 100644
index 0000000..acccf9a
--- /dev/null
+++ b/src/arm/nxp/vf/vfxxx.dtsi
@@ -0,0 +1,742 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+#include "vf610-pinfunc.h"
+#include <dt-bindings/clock/vf610-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ aliases {
+ can0 = &can0;
+ can1 = &can1;
+ ethernet0 = &fec0;
+ ethernet1 = &fec1;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ usbphy0 = &usbphy0;
+ usbphy1 = &usbphy1;
+ };
+
+ fxosc: fxosc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+
+ sxosc: sxosc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&src>;
+ offset = <0x0>;
+ mask = <0x1000>;
+ };
+
+ tempsensor: iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 16>, <&adc1 16>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&mscm_ir>;
+ ranges;
+
+ aips0: bus@40000000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x40000000 0x00070000>;
+ ranges;
+
+ mscm_cpucfg: cpucfg@40001000 {
+ compatible = "fsl,vf610-mscm-cpucfg", "syscon";
+ reg = <0x40001000 0x800>;
+ };
+
+ mscm_ir: interrupt-controller@40001800 {
+ compatible = "fsl,vf610-mscm-ir";
+ reg = <0x40001800 0x400>;
+ fsl,cpucfg = <&mscm_cpucfg>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ edma0: dma-controller@40018000 {
+ #dma-cells = <2>;
+ compatible = "fsl,vf610-edma";
+ reg = <0x40018000 0x2000>,
+ <0x40024000 0x1000>,
+ <0x40025000 0x1000>;
+ dma-channels = <32>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
+ <9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma-tx", "edma-err";
+ clock-names = "dmamux0", "dmamux1";
+ clocks = <&clks VF610_CLK_DMAMUX0>,
+ <&clks VF610_CLK_DMAMUX1>;
+ status = "disabled";
+ };
+
+ can0: can@40020000 {
+ compatible = "fsl,vf610-flexcan";
+ reg = <0x40020000 0x4000>;
+ interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_FLEXCAN0>,
+ <&clks VF610_CLK_FLEXCAN0>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart0: serial@40027000 {
+ compatible = "fsl,vf610-lpuart";
+ reg = <0x40027000 0x1000>;
+ interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_UART0>;
+ clock-names = "ipg";
+ dmas = <&edma0 0 2>, <&edma0 0 3>;
+ dma-names = "rx","tx";
+ status = "disabled";
+ };
+
+ uart1: serial@40028000 {
+ compatible = "fsl,vf610-lpuart";
+ reg = <0x40028000 0x1000>;
+ interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_UART1>;
+ clock-names = "ipg";
+ dmas = <&edma0 0 4>, <&edma0 0 5>;
+ dma-names = "rx","tx";
+ status = "disabled";
+ };
+
+ uart2: serial@40029000 {
+ compatible = "fsl,vf610-lpuart";
+ reg = <0x40029000 0x1000>;
+ interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_UART2>;
+ clock-names = "ipg";
+ dmas = <&edma0 0 6>, <&edma0 0 7>;
+ dma-names = "rx","tx";
+ status = "disabled";
+ };
+
+ uart3: serial@4002a000 {
+ compatible = "fsl,vf610-lpuart";
+ reg = <0x4002a000 0x1000>;
+ interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_UART3>;
+ clock-names = "ipg";
+ dmas = <&edma0 0 8>, <&edma0 0 9>;
+ dma-names = "rx","tx";
+ status = "disabled";
+ };
+
+ dspi0: spi@4002c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-dspi";
+ reg = <0x4002c000 0x1000>;
+ interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_DSPI0>;
+ clock-names = "dspi";
+ spi-num-chipselects = <6>;
+ dmas = <&edma1 1 12>, <&edma1 1 13>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ dspi1: spi@4002d000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-dspi";
+ reg = <0x4002d000 0x1000>;
+ interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_DSPI1>;
+ clock-names = "dspi";
+ spi-num-chipselects = <4>;
+ dmas = <&edma1 1 14>, <&edma1 1 15>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ sai0: sai@4002f000 {
+ compatible = "fsl,vf610-sai";
+ reg = <0x4002f000 0x1000>;
+ interrupts = <84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_SAI0>,
+ <&clks VF610_CLK_SAI0_DIV>,
+ <&clks 0>, <&clks 0>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "rx", "tx";
+ dmas = <&edma0 0 16>, <&edma0 0 17>;
+ status = "disabled";
+ };
+
+ sai1: sai@40030000 {
+ compatible = "fsl,vf610-sai";
+ reg = <0x40030000 0x1000>;
+ interrupts = <85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_SAI1>,
+ <&clks VF610_CLK_SAI1_DIV>,
+ <&clks 0>, <&clks 0>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "rx", "tx";
+ dmas = <&edma0 0 18>, <&edma0 0 19>;
+ status = "disabled";
+ };
+
+ sai2: sai@40031000 {
+ compatible = "fsl,vf610-sai";
+ reg = <0x40031000 0x1000>;
+ interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_SAI2>,
+ <&clks VF610_CLK_SAI2_DIV>,
+ <&clks 0>, <&clks 0>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "rx", "tx";
+ dmas = <&edma0 0 20>, <&edma0 0 21>;
+ status = "disabled";
+ };
+
+ sai3: sai@40032000 {
+ compatible = "fsl,vf610-sai";
+ reg = <0x40032000 0x1000>;
+ interrupts = <87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_SAI3>,
+ <&clks VF610_CLK_SAI3_DIV>,
+ <&clks 0>, <&clks 0>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "rx", "tx";
+ dmas = <&edma0 1 8>, <&edma0 1 9>;
+ status = "disabled";
+ };
+
+ pit: pit@40037000 {
+ compatible = "fsl,vf610-pit";
+ reg = <0x40037000 0x1000>;
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_PIT>;
+ clock-names = "pit";
+ };
+
+ pwm0: pwm@40038000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x40038000 0x1000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clks VF610_CLK_FTM0>,
+ <&clks VF610_CLK_FTM0_EXT_SEL>,
+ <&clks VF610_CLK_FTM0_FIX_SEL>,
+ <&clks VF610_CLK_FTM0_EXT_FIX_EN>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@40039000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x40039000 0x1000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clks VF610_CLK_FTM1>,
+ <&clks VF610_CLK_FTM1_EXT_SEL>,
+ <&clks VF610_CLK_FTM1_FIX_SEL>,
+ <&clks VF610_CLK_FTM1_EXT_FIX_EN>;
+ status = "disabled";
+ };
+
+ adc0: adc@4003b000 {
+ compatible = "fsl,vf610-adc";
+ reg = <0x4003b000 0x1000>;
+ interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_ADC0>;
+ clock-names = "adc";
+ #io-channel-cells = <1>;
+ status = "disabled";
+ fsl,adck-max-frequency = <30000000>, <40000000>,
+ <20000000>;
+ };
+
+ tcon0: timing-controller@4003d000 {
+ compatible = "fsl,vf610-tcon";
+ reg = <0x4003d000 0x1000>;
+ clocks = <&clks VF610_CLK_TCON0>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ wdoga5: watchdog@4003e000 {
+ compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
+ reg = <0x4003e000 0x1000>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_WDT>;
+ status = "disabled";
+ };
+
+ qspi0: spi@40044000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-qspi";
+ reg = <0x40044000 0x1000>, <0x20000000 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_QSPI0_EN>,
+ <&clks VF610_CLK_QSPI0>;
+ clock-names = "qspi_en", "qspi";
+ status = "disabled";
+ };
+
+ iomuxc: iomuxc@40048000 {
+ compatible = "fsl,vf610-iomuxc";
+ reg = <0x40048000 0x1000>;
+ };
+
+ gpio0: gpio@40049000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x40049000 0x1000 0x400ff000 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 0 32>;
+ };
+
+ gpio1: gpio@4004a000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x4004a000 0x1000 0x400ff040 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 32 32>;
+ };
+
+ gpio2: gpio@4004b000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x4004b000 0x1000 0x400ff080 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 64 32>;
+ };
+
+ gpio3: gpio@4004c000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 96 32>;
+ };
+
+ gpio4: gpio@4004d000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x4004d000 0x1000 0x400ff100 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <111 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 128 7>;
+ };
+
+ anatop: anatop@40050000 {
+ compatible = "fsl,vf610-anatop", "syscon";
+ reg = <0x40050000 0x400>;
+ };
+
+ usbphy0: usbphy@40050800 {
+ compatible = "fsl,vf610-usbphy";
+ reg = <0x40050800 0x400>;
+ interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_USBPHY0>;
+ fsl,anatop = <&anatop>;
+ status = "disabled";
+ };
+
+ usbphy1: usbphy@40050c00 {
+ compatible = "fsl,vf610-usbphy";
+ reg = <0x40050c00 0x400>;
+ interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_USBPHY1>;
+ fsl,anatop = <&anatop>;
+ status = "disabled";
+ };
+
+ dcu0: dcu@40058000 {
+ compatible = "fsl,vf610-dcu";
+ reg = <0x40058000 0x1200>;
+ interrupts = <30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_DCU0>,
+ <&clks VF610_CLK_DCU0_DIV>;
+ clock-names = "dcu", "pix";
+ fsl,tcon = <&tcon0>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@40066000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-i2c";
+ reg = <0x40066000 0x1000>;
+ interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_I2C0>;
+ clock-names = "ipg";
+ dmas = <&edma0 0 50>,
+ <&edma0 0 51>;
+ dma-names = "rx","tx";
+ status = "disabled";
+ };
+
+ i2c1: i2c@40067000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-i2c";
+ reg = <0x40067000 0x1000>;
+ interrupts = <72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_I2C1>;
+ clock-names = "ipg";
+ dmas = <&edma0 0 52>, <&edma0 0 53>;
+ dma-names = "rx","tx";
+ status = "disabled";
+ };
+
+ clks: ccm@4006b000 {
+ compatible = "fsl,vf610-ccm";
+ reg = <0x4006b000 0x1000>;
+ clocks = <&sxosc>, <&fxosc>;
+ clock-names = "sxosc", "fxosc";
+ #clock-cells = <1>;
+ };
+
+ usbdev0: usb@40034000 {
+ compatible = "fsl,vf610-usb", "fsl,imx27-usb";
+ reg = <0x40034000 0x800>;
+ interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_USBC0>;
+ fsl,usbphy = <&usbphy0>;
+ fsl,usbmisc = <&usbmisc0 0>;
+ dr_mode = "peripheral";
+ status = "disabled";
+ };
+
+ usbmisc0: usb@40034800 {
+ #index-cells = <1>;
+ compatible = "fsl,vf610-usbmisc";
+ reg = <0x40034800 0x200>;
+ clocks = <&clks VF610_CLK_USBC0>;
+ status = "disabled";
+ };
+
+ src: src@4006e000 {
+ compatible = "fsl,vf610-src", "syscon";
+ reg = <0x4006e000 0x1000>;
+ interrupts = <96 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ aips1: bus@40080000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x40080000 0x0007f000>;
+ ranges;
+
+ edma1: dma-controller@40098000 {
+ #dma-cells = <2>;
+ compatible = "fsl,vf610-edma";
+ reg = <0x40098000 0x2000>,
+ <0x400a1000 0x1000>,
+ <0x400a2000 0x1000>;
+ dma-channels = <32>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+ <11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma-tx", "edma-err";
+ clock-names = "dmamux0", "dmamux1";
+ clocks = <&clks VF610_CLK_DMAMUX2>,
+ <&clks VF610_CLK_DMAMUX3>;
+ status = "disabled";
+ };
+
+ ocotp: ocotp@400a5000 {
+ compatible = "fsl,vf610-ocotp", "syscon";
+ reg = <0x400a5000 0x1000>;
+ clocks = <&clks VF610_CLK_OCOTP>;
+ };
+
+ snvs0: snvs@400a7000 {
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x400a7000 0x2000>;
+
+ snvsrtc: snvs-rtc-lp {
+ compatible = "fsl,sec-v4.0-mon-rtc-lp";
+ regmap = <&snvs0>;
+ offset = <0x34>;
+ interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_SNVS>;
+ clock-names = "snvs-rtc";
+ };
+ };
+
+ uart4: serial@400a9000 {
+ compatible = "fsl,vf610-lpuart";
+ reg = <0x400a9000 0x1000>;
+ interrupts = <65 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_UART4>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ uart5: serial@400aa000 {
+ compatible = "fsl,vf610-lpuart";
+ reg = <0x400aa000 0x1000>;
+ interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_UART5>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ dspi2: spi@400ac000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-dspi";
+ reg = <0x400ac000 0x1000>;
+ interrupts = <69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_DSPI2>;
+ clock-names = "dspi";
+ spi-num-chipselects = <2>;
+ dmas = <&edma1 0 10>,
+ <&edma1 0 11>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ dspi3: spi@400ad000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-dspi";
+ reg = <0x400ad000 0x1000>;
+ interrupts = <70 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_DSPI3>;
+ clock-names = "dspi";
+ spi-num-chipselects = <2>;
+ dmas = <&edma1 0 12>, <&edma1 0 13>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ adc1: adc@400bb000 {
+ compatible = "fsl,vf610-adc";
+ reg = <0x400bb000 0x1000>;
+ interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_ADC1>;
+ clock-names = "adc";
+ #io-channel-cells = <1>;
+ status = "disabled";
+ fsl,adck-max-frequency = <30000000>, <40000000>,
+ <20000000>;
+ };
+
+ esdhc0: mmc@400b1000 {
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x400b1000 0x1000>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_IPG_BUS>,
+ <&clks VF610_CLK_PLATFORM_BUS>,
+ <&clks VF610_CLK_ESDHC0>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ esdhc1: mmc@400b2000 {
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x400b2000 0x1000>;
+ interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_IPG_BUS>,
+ <&clks VF610_CLK_PLATFORM_BUS>,
+ <&clks VF610_CLK_ESDHC1>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ usbh1: usb@400b4000 {
+ compatible = "fsl,vf610-usb", "fsl,imx27-usb";
+ reg = <0x400b4000 0x800>;
+ interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_USBC1>;
+ fsl,usbphy = <&usbphy1>;
+ fsl,usbmisc = <&usbmisc1 0>;
+ dr_mode = "host";
+ status = "disabled";
+ };
+
+ usbmisc1: usb@400b4800 {
+ #index-cells = <1>;
+ compatible = "fsl,vf610-usbmisc";
+ reg = <0x400b4800 0x200>;
+ clocks = <&clks VF610_CLK_USBC1>;
+ status = "disabled";
+ };
+
+ ftm: ftm@400b8000 {
+ compatible = "fsl,ftm-timer";
+ reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
+ interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "ftm-evt", "ftm-src",
+ "ftm-evt-counter-en", "ftm-src-counter-en";
+ clocks = <&clks VF610_CLK_FTM2>,
+ <&clks VF610_CLK_FTM3>,
+ <&clks VF610_CLK_FTM2_EXT_FIX_EN>,
+ <&clks VF610_CLK_FTM3_EXT_FIX_EN>;
+ status = "disabled";
+ };
+
+ qspi1: spi@400c4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-qspi";
+ reg = <0x400c4000 0x1000>, <0x50000000 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_QSPI1_EN>,
+ <&clks VF610_CLK_QSPI1>;
+ clock-names = "qspi_en", "qspi";
+ status = "disabled";
+ };
+
+ dac0: dac@400cc000 {
+ compatible = "fsl,vf610-dac";
+ reg = <0x400cc000 1000>;
+ interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "dac";
+ clocks = <&clks VF610_CLK_DAC0>;
+ status = "disabled";
+ };
+
+ dac1: dac@400cd000 {
+ compatible = "fsl,vf610-dac";
+ reg = <0x400cd000 1000>;
+ interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "dac";
+ clocks = <&clks VF610_CLK_DAC1>;
+ status = "disabled";
+ };
+
+ fec0: ethernet@400d0000 {
+ compatible = "fsl,mvf600-fec";
+ reg = <0x400d0000 0x1000>;
+ interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_ENET0>,
+ <&clks VF610_CLK_ENET0>,
+ <&clks VF610_CLK_ENET>;
+ clock-names = "ipg", "ahb", "ptp";
+ status = "disabled";
+ };
+
+ fec1: ethernet@400d1000 {
+ compatible = "fsl,mvf600-fec";
+ reg = <0x400d1000 0x1000>;
+ interrupts = <79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_ENET1>,
+ <&clks VF610_CLK_ENET1>,
+ <&clks VF610_CLK_ENET>;
+ clock-names = "ipg", "ahb", "ptp";
+ status = "disabled";
+ };
+
+ can1: can@400d4000 {
+ compatible = "fsl,vf610-flexcan";
+ reg = <0x400d4000 0x4000>;
+ interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_FLEXCAN1>,
+ <&clks VF610_CLK_FLEXCAN1>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ nfc: nand@400e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-nfc";
+ reg = <0x400e0000 0x4000>;
+ interrupts = <83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_NFC>;
+ clock-names = "nfc";
+ status = "disabled";
+ };
+
+ i2c2: i2c@400e6000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-i2c";
+ reg = <0x400e6000 0x1000>;
+ interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_I2C2>;
+ clock-names = "ipg";
+ dmas = <&edma0 1 36>,
+ <&edma0 1 37>;
+ dma-names = "rx","tx";
+ status = "disabled";
+ };
+
+ i2c3: i2c@400e7000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-i2c";
+ reg = <0x400e7000 0x1000>;
+ interrupts = <74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_I2C3>;
+ clock-names = "ipg";
+ dmas = <&edma0 1 38>, <&edma0 1 39>;
+ dma-names = "rx","tx";
+ status = "disabled";
+ };
+
+ crypto: crypto@400f0000 {
+ compatible = "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x400f0000 0x9000>;
+ ranges = <0 0x400f0000 0x9000>;
+ clocks = <&clks VF610_CLK_CAAM>;
+ clock-names = "ipg";
+
+ sec_jr0: jr0@1000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr1@2000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+ };
+};