Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/arm/nxp/lpc/lpc18xx.dtsi b/src/arm/nxp/lpc/lpc18xx.dtsi
new file mode 100644
index 0000000..9cf09c1
--- /dev/null
+++ b/src/arm/nxp/lpc/lpc18xx.dtsi
@@ -0,0 +1,537 @@
+/*
+ * Common base for NXP LPC18xx and LPC43xx devices.
+ *
+ * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+
+#include "../../armv7-m.dtsi"
+
+#include "dt-bindings/clock/lpc18xx-cgu.h"
+#include "dt-bindings/clock/lpc18xx-ccu.h"
+
+#define LPC_PIN(port, pin) (0x##port * 32 + pin)
+#define LPC_GPIO(port, pin) (port * 32 + pin)
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-m3";
+ device_type = "cpu";
+ reg = <0x0>;
+ clocks = <&ccu1 CLK_CPU_CORE>;
+ };
+ };
+
+ clocks {
+ xtal: xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+
+ xtal32: xtal32 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ enet_rx_clk: enet_rx_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "enet_rx_clk";
+ };
+
+ enet_tx_clk: enet_tx_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "enet_tx_clk";
+ };
+
+ gp_clkin: gp_clkin {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "gp_clkin";
+ };
+ };
+
+ soc {
+ sct_pwm: pwm@40000000 {
+ compatible = "nxp,lpc1850-sct-pwm";
+ reg = <0x40000000 0x1000>;
+ clocks =<&ccu1 CLK_CPU_SCT>;
+ clock-names = "pwm";
+ resets = <&rgu 37>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ dmac: dma-controller@40002000 {
+ compatible = "arm,pl080", "arm,primecell";
+ arm,primecell-periphid = <0x00041080>;
+ reg = <0x40002000 0x1000>;
+ interrupts = <2>;
+ clocks = <&ccu1 CLK_CPU_DMA>;
+ clock-names = "apb_pclk";
+ resets = <&rgu 19>;
+ #dma-cells = <2>;
+ dma-channels = <8>;
+ dma-requests = <16>;
+ lli-bus-interface-ahb1;
+ lli-bus-interface-ahb2;
+ mem-bus-interface-ahb1;
+ mem-bus-interface-ahb2;
+ memcpy-burst-size = <256>;
+ memcpy-bus-width = <32>;
+ };
+
+ spifi: flash-controller@40003000 {
+ compatible = "nxp,lpc1773-spifi";
+ reg = <0x40003000 0x1000>, <0x14000000 0x4000000>;
+ reg-names = "spifi", "flash";
+ interrupts = <30>;
+ clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>;
+ clock-names = "spifi", "reg";
+ resets = <&rgu 53>;
+ status = "disabled";
+ };
+
+ mmcsd: mmcsd@40004000 {
+ compatible = "snps,dw-mshc";
+ reg = <0x40004000 0x1000>;
+ interrupts = <6>;
+ clocks = <&ccu2 CLK_SDIO>, <&ccu1 CLK_CPU_SDIO>;
+ clock-names = "ciu", "biu";
+ resets = <&rgu 20>;
+ status = "disabled";
+ };
+
+ usb0: usb@40006100 {
+ compatible = "nxp,lpc1850-ehci", "generic-ehci";
+ reg = <0x40006100 0x100>;
+ interrupts = <8>;
+ clocks = <&ccu1 CLK_CPU_USB0>;
+ resets = <&rgu 17>;
+ phys = <&usb0_otg_phy>;
+ phy-names = "usb";
+ has-transaction-translator;
+ status = "disabled";
+ };
+
+ usb1: usb@40007100 {
+ compatible = "nxp,lpc1850-ehci", "generic-ehci";
+ reg = <0x40007100 0x100>;
+ interrupts = <9>;
+ clocks = <&ccu1 CLK_CPU_USB1>;
+ resets = <&rgu 18>;
+ status = "disabled";
+ };
+
+ emc: memory-controller@40005000 {
+ compatible = "arm,pl172", "arm,primecell";
+ reg = <0x40005000 0x1000>;
+ clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>;
+ clock-names = "mpmcclk", "apb_pclk";
+ resets = <&rgu 21>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x1c000000 0x1000000
+ 1 0 0x1d000000 0x1000000
+ 2 0 0x1e000000 0x1000000
+ 3 0 0x1f000000 0x1000000>;
+ status = "disabled";
+ };
+
+ lcdc: lcd-controller@40008000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x40008000 0x1000>;
+ interrupts = <7>;
+ interrupt-names = "combined";
+ clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>;
+ clock-names = "clcdclk", "apb_pclk";
+ resets = <&rgu 16>;
+ status = "disabled";
+ };
+
+ eeprom: eeprom@4000e000 {
+ compatible = "nxp,lpc1857-eeprom";
+ reg = <0x4000e000 0x1000>, <0x20040000 0x4000>;
+ reg-names = "reg", "mem";
+ clocks = <&ccu1 CLK_CPU_EEPROM>;
+ clock-names = "eeprom";
+ resets = <&rgu 27>;
+ interrupts = <4>;
+ status = "disabled";
+ };
+
+ mac: ethernet@40010000 {
+ compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac";
+ reg = <0x40010000 0x2000>;
+ interrupts = <5>;
+ interrupt-names = "macirq";
+ clocks = <&ccu1 CLK_CPU_ETHERNET>;
+ clock-names = "stmmaceth";
+ resets = <&rgu 22>;
+ reset-names = "stmmaceth";
+ rx-fifo-depth = <256>;
+ tx-fifo-depth = <256>;
+ snps,pbl = <4>; /* 32 (8x mode) */
+ snps,force_thresh_dma_mode;
+ status = "disabled";
+ };
+
+ creg: syscon@40043000 {
+ compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
+ reg = <0x40043000 0x1000>;
+ clocks = <&ccu1 CLK_CPU_CREG>;
+ resets = <&rgu 5>;
+
+ creg_clk: clock-controller {
+ compatible = "nxp,lpc1850-creg-clk";
+ clocks = <&xtal32>;
+ #clock-cells = <1>;
+ };
+
+ usb0_otg_phy: phy {
+ compatible = "nxp,lpc1850-usb-otg-phy";
+ clocks = <&ccu1 CLK_USB0>;
+ #phy-cells = <0>;
+ };
+
+ dmamux: dma-mux {
+ compatible = "nxp,lpc1850-dmamux";
+ #dma-cells = <3>;
+ dma-requests = <64>;
+ dma-masters = <&dmac>;
+ };
+ };
+
+ rtc: rtc@40046000 {
+ compatible = "nxp,lpc1850-rtc", "nxp,lpc1788-rtc";
+ reg = <0x40046000 0x1000>;
+ interrupts = <47>;
+ clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>;
+ clock-names = "rtc", "reg";
+ };
+
+ cgu: clock-controller@40050000 {
+ compatible = "nxp,lpc1850-cgu";
+ reg = <0x40050000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&xtal>, <&creg_clk 1>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>;
+ };
+
+ ccu1: clock-controller@40051000 {
+ compatible = "nxp,lpc1850-ccu";
+ reg = <0x40051000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&cgu BASE_APB3_CLK>, <&cgu BASE_APB1_CLK>,
+ <&cgu BASE_SPIFI_CLK>, <&cgu BASE_CPU_CLK>,
+ <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>,
+ <&cgu BASE_USB1_CLK>, <&cgu BASE_SPI_CLK>;
+ clock-names = "base_apb3_clk", "base_apb1_clk",
+ "base_spifi_clk", "base_cpu_clk",
+ "base_periph_clk", "base_usb0_clk",
+ "base_usb1_clk", "base_spi_clk";
+ };
+
+ ccu2: clock-controller@40052000 {
+ compatible = "nxp,lpc1850-ccu";
+ reg = <0x40052000 0x1000>;
+ #clock-cells = <1>;
+ clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>,
+ <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>,
+ <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>,
+ <&cgu BASE_SSP0_CLK>, <&cgu BASE_SDIO_CLK>;
+ clock-names = "base_audio_clk", "base_uart3_clk",
+ "base_uart2_clk", "base_uart1_clk",
+ "base_uart0_clk", "base_ssp1_clk",
+ "base_ssp0_clk", "base_sdio_clk";
+ };
+
+ rgu: reset-controller@40053000 {
+ compatible = "nxp,lpc1850-rgu";
+ reg = <0x40053000 0x1000>;
+ clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>;
+ clock-names = "delay", "reg";
+ #reset-cells = <1>;
+ };
+
+ watchdog@40080000 {
+ compatible = "nxp,lpc1850-wwdt";
+ reg = <0x40080000 0x24>;
+ interrupts = <49>;
+ clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_WWDT>;
+ clock-names = "wdtclk", "reg";
+ };
+
+ uart0: serial@40081000 {
+ compatible = "nxp,lpc1850-uart", "ns16550a";
+ reg = <0x40081000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <24>;
+ clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>;
+ clock-names = "uartclk", "reg";
+ resets = <&rgu 44>;
+ dmas = <&dmamux 1 1 2
+ &dmamux 2 1 2
+ &dmamux 11 2 2
+ &dmamux 12 2 2>;
+ dma-names = "tx", "rx", "tx", "rx";
+ status = "disabled";
+ };
+
+ uart1: serial@40082000 {
+ compatible = "nxp,lpc1850-uart", "ns16550a";
+ reg = <0x40082000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <25>;
+ clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>;
+ clock-names = "uartclk", "reg";
+ resets = <&rgu 45>;
+ dmas = <&dmamux 3 1 2
+ &dmamux 4 1 2>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ ssp0: spi@40083000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x40083000 0x1000>;
+ interrupts = <22>;
+ clocks = <&ccu2 CLK_APB0_SSP0>, <&ccu1 CLK_CPU_SSP0>;
+ clock-names = "sspclk", "apb_pclk";
+ resets = <&rgu 50>;
+ dmas = <&dmamux 9 0 2
+ &dmamux 10 0 2>;
+ dma-names = "rx", "tx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ timer0: timer@40084000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x40084000 0x1000>;
+ interrupts = <12>;
+ clocks = <&ccu1 CLK_CPU_TIMER0>;
+ clock-names = "timerclk";
+ resets = <&rgu 32>;
+ };
+
+ timer1: timer@40085000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x40085000 0x1000>;
+ interrupts = <13>;
+ clocks = <&ccu1 CLK_CPU_TIMER1>;
+ clock-names = "timerclk";
+ resets = <&rgu 33>;
+ };
+
+ pinctrl: pinctrl@40086000 {
+ compatible = "nxp,lpc1850-scu";
+ reg = <0x40086000 0x1000>;
+ clocks = <&ccu1 CLK_CPU_SCU>;
+ };
+
+ i2c0: i2c@400a1000 {
+ compatible = "nxp,lpc1788-i2c";
+ reg = <0x400a1000 0x1000>;
+ interrupts = <18>;
+ clocks = <&ccu1 CLK_APB1_I2C0>;
+ resets = <&rgu 48>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ can1: can@400a4000 {
+ compatible = "bosch,c_can";
+ reg = <0x400a4000 0x1000>;
+ interrupts = <43>;
+ clocks = <&ccu1 CLK_APB1_CAN1>;
+ resets = <&rgu 54>;
+ status = "disabled";
+ };
+
+ uart2: serial@400c1000 {
+ compatible = "nxp,lpc1850-uart", "ns16550a";
+ reg = <0x400c1000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <26>;
+ clocks = <&ccu2 CLK_APB2_UART2>, <&ccu1 CLK_CPU_UART2>;
+ clock-names = "uartclk", "reg";
+ resets = <&rgu 46>;
+ dmas = <&dmamux 5 1 2
+ &dmamux 6 1 2>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ uart3: serial@400c2000 {
+ compatible = "nxp,lpc1850-uart", "ns16550a";
+ reg = <0x400c2000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <27>;
+ clocks = <&ccu2 CLK_APB2_UART3>, <&ccu1 CLK_CPU_UART3>;
+ clock-names = "uartclk", "reg";
+ resets = <&rgu 47>;
+ dmas = <&dmamux 7 1 2
+ &dmamux 8 1 2
+ &dmamux 13 3 2
+ &dmamux 14 3 2>;
+ dma-names = "tx", "rx", "rx", "tx";
+ status = "disabled";
+ };
+
+ timer2: timer@400c3000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x400c3000 0x1000>;
+ interrupts = <14>;
+ clocks = <&ccu1 CLK_CPU_TIMER2>;
+ clock-names = "timerclk";
+ resets = <&rgu 34>;
+ };
+
+ timer3: timer@400c4000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x400c4000 0x1000>;
+ interrupts = <15>;
+ clocks = <&ccu1 CLK_CPU_TIMER3>;
+ clock-names = "timerclk";
+ resets = <&rgu 35>;
+ };
+
+ ssp1: spi@400c5000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x400c5000 0x1000>;
+ interrupts = <23>;
+ clocks = <&ccu2 CLK_APB2_SSP1>, <&ccu1 CLK_CPU_SSP1>;
+ clock-names = "sspclk", "apb_pclk";
+ resets = <&rgu 51>;
+ dmas = <&dmamux 11 2 2
+ &dmamux 12 2 2
+ &dmamux 3 3 2
+ &dmamux 4 3 2
+ &dmamux 5 2 2
+ &dmamux 6 2 2
+ &dmamux 13 2 2
+ &dmamux 14 2 2>;
+ dma-names = "rx", "tx", "tx", "rx",
+ "tx", "rx", "rx", "tx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@400e0000 {
+ compatible = "nxp,lpc1788-i2c";
+ reg = <0x400e0000 0x1000>;
+ interrupts = <19>;
+ clocks = <&ccu1 CLK_APB3_I2C1>;
+ resets = <&rgu 49>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ dac: dac@400e1000 {
+ compatible = "nxp,lpc1850-dac";
+ reg = <0x400e1000 0x1000>;
+ interrupts = <0>;
+ clocks = <&ccu1 CLK_APB3_DAC>;
+ resets = <&rgu 42>;
+ status = "disabled";
+ };
+
+ can0: can@400e2000 {
+ compatible = "bosch,c_can";
+ reg = <0x400e2000 0x1000>;
+ interrupts = <51>;
+ clocks = <&ccu1 CLK_APB3_CAN0>;
+ resets = <&rgu 55>;
+ status = "disabled";
+ };
+
+ adc0: adc@400e3000 {
+ compatible = "nxp,lpc1850-adc";
+ reg = <0x400e3000 0x1000>;
+ interrupts = <17>;
+ clocks = <&ccu1 CLK_APB3_ADC0>;
+ resets = <&rgu 40>;
+ status = "disabled";
+ };
+
+ adc1: adc@400e4000 {
+ compatible = "nxp,lpc1850-adc";
+ reg = <0x400e4000 0x1000>;
+ interrupts = <21>;
+ clocks = <&ccu1 CLK_APB3_ADC1>;
+ resets = <&rgu 41>;
+ status = "disabled";
+ };
+
+ gpio: gpio@400f4000 {
+ compatible = "nxp,lpc1850-gpio";
+ reg = <0x400f4000 0x4000>;
+ clocks = <&ccu1 CLK_CPU_GPIO>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl LPC_GPIO(0,0) LPC_PIN(0,0) 2>,
+ <&pinctrl LPC_GPIO(0,4) LPC_PIN(1,0) 1>,
+ <&pinctrl LPC_GPIO(0,8) LPC_PIN(1,1) 4>,
+ <&pinctrl LPC_GPIO(1,8) LPC_PIN(1,5) 2>,
+ <&pinctrl LPC_GPIO(1,0) LPC_PIN(1,7) 8>,
+ <&pinctrl LPC_GPIO(0,2) LPC_PIN(1,15) 2>,
+ <&pinctrl LPC_GPIO(0,12) LPC_PIN(1,17) 2>,
+ <&pinctrl LPC_GPIO(0,15) LPC_PIN(1,20) 1>,
+ <&pinctrl LPC_GPIO(5,0) LPC_PIN(2,0) 7>,
+ <&pinctrl LPC_GPIO(0,7) LPC_PIN(2,7) 1>,
+ <&pinctrl LPC_GPIO(5,7) LPC_PIN(2,8) 1>,
+ <&pinctrl LPC_GPIO(1,10) LPC_PIN(2,9) 1>,
+ <&pinctrl LPC_GPIO(0,14) LPC_PIN(2,10) 1>,
+ <&pinctrl LPC_GPIO(1,11) LPC_PIN(2,11) 3>,
+ <&pinctrl LPC_GPIO(5,8) LPC_PIN(3,1) 2>,
+ <&pinctrl LPC_GPIO(1,14) LPC_PIN(3,4) 2>,
+ <&pinctrl LPC_GPIO(0,6) LPC_PIN(3,6) 1>,
+ <&pinctrl LPC_GPIO(5,10) LPC_PIN(3,7) 2>,
+ <&pinctrl LPC_GPIO(2,0) LPC_PIN(4,0) 7>,
+ <&pinctrl LPC_GPIO(5,12) LPC_PIN(4,8) 3>,
+ <&pinctrl LPC_GPIO(2,9) LPC_PIN(5,0) 7>,
+ <&pinctrl LPC_GPIO(2,7) LPC_PIN(5,7) 1>,
+ <&pinctrl LPC_GPIO(3,0) LPC_PIN(6,1) 5>,
+ <&pinctrl LPC_GPIO(0,5) LPC_PIN(6,6) 1>,
+ <&pinctrl LPC_GPIO(5,15) LPC_PIN(6,7) 2>,
+ <&pinctrl LPC_GPIO(3,5) LPC_PIN(6,9) 3>,
+ <&pinctrl LPC_GPIO(2,8) LPC_PIN(6,12) 1>,
+ <&pinctrl LPC_GPIO(3,8) LPC_PIN(7,0) 8>,
+ <&pinctrl LPC_GPIO(4,0) LPC_PIN(8,0) 8>,
+ <&pinctrl LPC_GPIO(4,12) LPC_PIN(9,0) 4>,
+ <&pinctrl LPC_GPIO(5,17) LPC_PIN(9,4) 2>,
+ <&pinctrl LPC_GPIO(4,11) LPC_PIN(9,6) 1>,
+ <&pinctrl LPC_GPIO(4,8) LPC_PIN(a,1) 3>,
+ <&pinctrl LPC_GPIO(5,19) LPC_PIN(a,4) 1>,
+ <&pinctrl LPC_GPIO(5,20) LPC_PIN(b,0) 7>,
+ <&pinctrl LPC_GPIO(6,0) LPC_PIN(c,1) 14>,
+ <&pinctrl LPC_GPIO(6,14) LPC_PIN(d,0) 17>,
+ <&pinctrl LPC_GPIO(7,0) LPC_PIN(e,0) 16>,
+ <&pinctrl LPC_GPIO(7,16) LPC_PIN(f,1) 3>,
+ <&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5) 7>;
+ };
+ };
+};
diff --git a/src/arm/nxp/lpc/lpc3250-ea3250.dts b/src/arm/nxp/lpc/lpc3250-ea3250.dts
new file mode 100644
index 0000000..63c6f17
--- /dev/null
+++ b/src/arm/nxp/lpc/lpc3250-ea3250.dts
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Embedded Artists LPC3250 board
+ *
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ */
+
+/dts-v1/;
+#include "lpc32xx.dtsi"
+
+/ {
+ model = "Embedded Artists LPC3250 board based on NXP LPC3250";
+ compatible = "ea,ea3250", "nxp,lpc3250";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x4000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ button {
+ label = "Interrupt Key";
+ linux,code = <103>;
+ gpios = <&gpio 4 1 0>; /* GPI_P3 1 */
+ };
+
+ key1 {
+ label = "KEY1";
+ linux,code = <1>;
+ gpios = <&pca9532 0 0>;
+ };
+
+ key2 {
+ label = "KEY2";
+ linux,code = <2>;
+ gpios = <&pca9532 1 0>;
+ };
+
+ key3 {
+ label = "KEY3";
+ linux,code = <3>;
+ gpios = <&pca9532 2 0>;
+ };
+
+ key4 {
+ label = "KEY4";
+ linux,code = <4>;
+ gpios = <&pca9532 3 0>;
+ };
+
+ joy0 {
+ label = "Joystick Key 0";
+ linux,code = <10>;
+ gpios = <&gpio 2 0 0>; /* P2.0 */
+ };
+
+ joy1 {
+ label = "Joystick Key 1";
+ linux,code = <11>;
+ gpios = <&gpio 2 1 0>; /* P2.1 */
+ };
+
+ joy2 {
+ label = "Joystick Key 2";
+ linux,code = <12>;
+ gpios = <&gpio 2 2 0>; /* P2.2 */
+ };
+
+ joy3 {
+ label = "Joystick Key 3";
+ linux,code = <13>;
+ gpios = <&gpio 2 3 0>; /* P2.3 */
+ };
+
+ joy4 {
+ label = "Joystick Key 4";
+ linux,code = <14>;
+ gpios = <&gpio 2 4 0>; /* P2.4 */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ /* LEDs on OEM Board */
+
+ led1 {
+ gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */
+ linux,default-trigger = "timer";
+ default-state = "off";
+ };
+
+ led2 {
+ gpios = <&gpio 2 10 1>; /* P2.10, active low */
+ default-state = "off";
+ };
+
+ led3 {
+ gpios = <&gpio 2 11 1>; /* P2.11, active low */
+ default-state = "off";
+ };
+
+ led4 {
+ gpios = <&gpio 2 12 1>; /* P2.12, active low */
+ default-state = "off";
+ };
+
+ /* LEDs on Base Board */
+
+ lede1 {
+ gpios = <&pca9532 8 0>;
+ default-state = "off";
+ };
+ lede2 {
+ gpios = <&pca9532 9 0>;
+ default-state = "off";
+ };
+ lede3 {
+ gpios = <&pca9532 10 0>;
+ default-state = "off";
+ };
+ lede4 {
+ gpios = <&pca9532 11 0>;
+ default-state = "off";
+ };
+ lede5 {
+ gpios = <&pca9532 12 0>;
+ default-state = "off";
+ };
+ lede6 {
+ gpios = <&pca9532 13 0>;
+ default-state = "off";
+ };
+ lede7 {
+ gpios = <&pca9532 14 0>;
+ default-state = "off";
+ };
+ lede8 {
+ gpios = <&pca9532 15 0>;
+ default-state = "off";
+ };
+ };
+};
+
+/* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */
+&adc {
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+
+ uda1380: uda1380@18 {
+ compatible = "nxp,uda1380";
+ reg = <0x18>;
+ power-gpio = <&gpio 3 10 0>;
+ reset-gpio = <&gpio 3 2 0>;
+ dac-clk = "wspll";
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+
+ eeprom@57 {
+ compatible = "atmel,24c64";
+ reg = <0x57>;
+ };
+
+ pca9532: pca9532@60 {
+ compatible = "nxp,pca9532";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x60>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+};
+
+&i2cusb {
+ clock-frequency = <100000>;
+
+ isp1301: usb-transceiver@2d {
+ compatible = "nxp,isp1301";
+ reg = <0x2d>;
+ };
+};
+
+&mac {
+ phy-mode = "rmii";
+ use-iram;
+ status = "okay";
+};
+
+/* Here, choose exactly one from: ohci, usbd */
+&ohci /* &usbd */ {
+ transceiver = <&isp1301>;
+ status = "okay";
+};
+
+&sd {
+ wp-gpios = <&pca9532 5 0>;
+ cd-gpios = <&pca9532 4 0>;
+ cd-inverted;
+ bus-width = <4>;
+ status = "okay";
+};
+
+/* 128MB Flash via SLC NAND controller */
+&slc {
+ status = "okay";
+
+ nxp,wdr-clks = <14>;
+ nxp,wwidth = <260000000>;
+ nxp,whold = <104000000>;
+ nxp,wsetup = <200000000>;
+ nxp,rdr-clks = <14>;
+ nxp,rwidth = <34666666>;
+ nxp,rhold = <104000000>;
+ nxp,rsetup = <200000000>;
+ nand-on-flash-bbt;
+ gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mtd0@0 {
+ label = "ea3250-boot";
+ reg = <0x00000000 0x00080000>;
+ read-only;
+ };
+
+ mtd1@80000 {
+ label = "ea3250-uboot";
+ reg = <0x00080000 0x000c0000>;
+ read-only;
+ };
+
+ mtd2@140000 {
+ label = "ea3250-kernel";
+ reg = <0x00140000 0x00400000>;
+ };
+
+ mtd3@540000 {
+ label = "ea3250-rootfs";
+ reg = <0x00540000 0x07ac0000>;
+ };
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&uart6 {
+ status = "okay";
+};
diff --git a/src/arm/nxp/lpc/lpc3250-phy3250.dts b/src/arm/nxp/lpc/lpc3250-phy3250.dts
new file mode 100644
index 0000000..21a6d0b
--- /dev/null
+++ b/src/arm/nxp/lpc/lpc3250-phy3250.dts
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * PHYTEC phyCORE-LPC3250 board
+ *
+ * Copyright (C) 2015-2019 Vladimir Zapolskiy <vz@mleia.com>
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ */
+
+/dts-v1/;
+#include "lpc32xx.dtsi"
+
+/ {
+ model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250";
+ compatible = "phytec,phy3250", "nxp,lpc3250";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x4000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led0 { /* red */
+ gpios = <&gpio 5 1 0>; /* GPO_P3 1, GPIO 80, active high */
+ default-state = "off";
+ };
+
+ led1 { /* green */
+ gpios = <&gpio 5 14 0>; /* GPO_P3 14, GPIO 93, active high */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ panel: panel {
+ compatible = "sharp,lq035q7db03";
+ power-supply = <®_lcd>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&cldc_output>;
+ };
+ };
+ };
+
+ reg_backlight: regulator-backlight {
+ compatible = "regulator-fixed";
+ regulator-name = "backlight";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio 5 4 0>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ reg_lcd: regulator-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio 5 0 0>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ reg_sd: regulator-sd {
+ compatible = "regulator-fixed";
+ regulator-name = "sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio 5 5 0>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+};
+
+&clcd {
+ max-memory-bandwidth = <18710000>;
+ status = "okay";
+
+ port {
+ cldc_output: endpoint {
+ remote-endpoint = <&panel_input>;
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+
+ uda1380: uda1380@18 {
+ compatible = "nxp,uda1380";
+ reg = <0x18>;
+ power-gpio = <&gpio 3 10 0>;
+ reset-gpio = <&gpio 3 2 0>;
+ dac-clk = "wspll";
+ };
+
+ pcf8563: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+};
+
+&i2cusb {
+ clock-frequency = <100000>;
+
+ isp1301: usb-transceiver@2c {
+ compatible = "nxp,isp1301";
+ reg = <0x2c>;
+ };
+};
+
+&key {
+ keypad,num-rows = <1>;
+ keypad,num-columns = <1>;
+ nxp,debounce-delay-ms = <3>;
+ nxp,scan-delay-ms = <34>;
+ linux,keymap = <0x00000002>;
+ status = "okay";
+};
+
+&mac {
+ phy-mode = "rmii";
+ use-iram;
+ status = "okay";
+};
+
+/* Here, choose exactly one from: ohci, usbd */
+&ohci /* &usbd */ {
+ transceiver = <&isp1301>;
+ status = "okay";
+};
+
+&sd {
+ wp-gpios = <&gpio 3 0 0>;
+ cd-gpios = <&gpio 3 1 0>;
+ cd-inverted;
+ bus-width = <4>;
+ vmmc-supply = <®_sd>;
+ status = "okay";
+};
+
+/* 64MB Flash via SLC NAND controller */
+&slc {
+ status = "okay";
+
+ nxp,wdr-clks = <14>;
+ nxp,wwidth = <40000000>;
+ nxp,whold = <100000000>;
+ nxp,wsetup = <100000000>;
+ nxp,rdr-clks = <14>;
+ nxp,rwidth = <40000000>;
+ nxp,rhold = <66666666>;
+ nxp,rsetup = <100000000>;
+ nand-on-flash-bbt;
+ gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mtd0@0 {
+ label = "phy3250-boot";
+ reg = <0x00000000 0x00064000>;
+ read-only;
+ };
+
+ mtd1@64000 {
+ label = "phy3250-uboot";
+ reg = <0x00064000 0x00190000>;
+ read-only;
+ };
+
+ mtd2@1f4000 {
+ label = "phy3250-ubt-prms";
+ reg = <0x001f4000 0x00010000>;
+ };
+
+ mtd3@204000 {
+ label = "phy3250-kernel";
+ reg = <0x00204000 0x00400000>;
+ };
+
+ mtd4@604000 {
+ label = "phy3250-rootfs";
+ reg = <0x00604000 0x039fc000>;
+ };
+ };
+};
+
+&ssp0 {
+ num-cs = <1>;
+ cs-gpios = <&gpio 3 5 0>;
+ status = "okay";
+
+ eeprom: at25@0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+
+ pl022,interface = <0>;
+ pl022,com-mode = <0>;
+ pl022,rx-level-trig = <1>;
+ pl022,tx-level-trig = <1>;
+ pl022,ctrl-len = <11>;
+ pl022,wait-state = <0>;
+ pl022,duplex = <0>;
+
+ at25,byte-len = <0x8000>;
+ at25,addr-mode = <2>;
+ at25,page-size = <64>;
+ };
+};
+
+&tsc {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
diff --git a/src/arm/nxp/lpc/lpc32xx.dtsi b/src/arm/nxp/lpc/lpc32xx.dtsi
new file mode 100644
index 0000000..9744109
--- /dev/null
+++ b/src/arm/nxp/lpc/lpc32xx.dtsi
@@ -0,0 +1,508 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * NXP LPC32xx SoC
+ *
+ * Copyright (C) 2015-2019 Vladimir Zapolskiy <vz@mleia.com>
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ */
+
+#include <dt-bindings/clock/lpc32xx-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "nxp,lpc3220";
+ interrupt-parent = <&mic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
+ reg = <0x0>;
+ };
+ };
+
+ clocks {
+ xtal_32k: xtal_32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "xtal_32k";
+ };
+
+ xtal: xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <13000000>;
+ clock-output-names = "xtal";
+ };
+ };
+
+ ahb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x00000000 0x10000000>,
+ <0x20000000 0x20000000 0x30000000>,
+ <0xe0000000 0xe0000000 0x04000000>;
+
+ iram: sram@8000000 {
+ compatible = "mmio-sram";
+ reg = <0x08000000 0x20000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x08000000 0x20000>;
+ };
+
+ /*
+ * Enable either SLC or MLC
+ */
+ slc: flash@20020000 {
+ compatible = "nxp,lpc3220-slc";
+ reg = <0x20020000 0x1000>;
+ clocks = <&clk LPC32XX_CLK_SLC>;
+ status = "disabled";
+ };
+
+ mlc: flash@200a8000 {
+ compatible = "nxp,lpc3220-mlc";
+ reg = <0x200a8000 0x11000>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_MLC>;
+ status = "disabled";
+ };
+
+ dma: dma@31000000 {
+ compatible = "arm,pl080", "arm,primecell";
+ reg = <0x31000000 0x1000>;
+ interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_DMA>;
+ clock-names = "apb_pclk";
+ };
+
+ usb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x0 0x31020000 0x00001000>;
+
+ /*
+ * Enable either ohci or usbd (gadget)!
+ */
+ ohci: ohci@0 {
+ compatible = "nxp,ohci-nxp", "usb-ohci";
+ reg = <0x0 0x300>;
+ interrupt-parent = <&sic1>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usbclk LPC32XX_USB_CLK_HOST>;
+ status = "disabled";
+ };
+
+ usbd: usbd@0 {
+ compatible = "nxp,lpc3220-udc";
+ reg = <0x0 0x300>;
+ interrupt-parent = <&sic1>;
+ interrupts = <29 IRQ_TYPE_LEVEL_HIGH>,
+ <30 IRQ_TYPE_LEVEL_HIGH>,
+ <28 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&usbclk LPC32XX_USB_CLK_DEVICE>;
+ status = "disabled";
+ };
+
+ i2cusb: i2c@300 {
+ compatible = "nxp,pnx-i2c";
+ reg = <0x300 0x100>;
+ interrupt-parent = <&sic1>;
+ interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usbclk LPC32XX_USB_CLK_I2C>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ usbclk: clock-controller@f00 {
+ compatible = "nxp,lpc3220-usb-clk";
+ reg = <0xf00 0x100>;
+ #clock-cells = <1>;
+ };
+ };
+
+ clcd: clcd@31040000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x31040000 0x1000>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_LCD>, <&clk LPC32XX_CLK_LCD>;
+ clock-names = "clcdclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ mac: ethernet@31060000 {
+ compatible = "nxp,lpc-eth";
+ reg = <0x31060000 0x1000>;
+ interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_MAC>;
+ status = "disabled";
+ };
+
+ emc: memory-controller@31080000 {
+ compatible = "arm,pl175", "arm,primecell";
+ reg = <0x31080000 0x1000>;
+ clocks = <&clk LPC32XX_CLK_DDRAM>, <&clk LPC32XX_CLK_DDRAM>;
+ clock-names = "mpmcclk", "apb_pclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0 0xe0000000 0x01000000>,
+ <1 0xe1000000 0x01000000>,
+ <2 0xe2000000 0x01000000>,
+ <3 0xe3000000 0x01000000>;
+ status = "disabled";
+ };
+
+ apb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x20000000 0x20000000 0x30000000>;
+
+ /*
+ * ssp0 and spi1 are shared pins;
+ * enable one in your board dts, as needed.
+ */
+ ssp0: spi@20084000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x20084000 0x1000>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_SSP0>;
+ clock-names = "apb_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@20088000 {
+ compatible = "nxp,lpc3220-spi";
+ reg = <0x20088000 0x1000>;
+ clocks = <&clk LPC32XX_CLK_SPI1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ /*
+ * ssp1 and spi2 are shared pins;
+ * enable one in your board dts, as needed.
+ */
+ ssp1: spi@2008c000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x2008c000 0x1000>;
+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_SSP1>;
+ clock-names = "apb_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi@20090000 {
+ compatible = "nxp,lpc3220-spi";
+ reg = <0x20090000 0x1000>;
+ clocks = <&clk LPC32XX_CLK_SPI2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2s0: i2s@20094000 {
+ compatible = "nxp,lpc3220-i2s";
+ reg = <0x20094000 0x1000>;
+ status = "disabled";
+ };
+
+ sd: sd@20098000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x20098000 0x1000>;
+ interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+ <13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_SD>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ i2s1: i2s@2009c000 {
+ compatible = "nxp,lpc3220-i2s";
+ reg = <0x2009c000 0x1000>;
+ status = "disabled";
+ };
+
+ /* UART5 first since it is the default console, ttyS0 */
+ uart5: serial@40090000 {
+ /* actually, ns16550a w/ 64 byte fifos! */
+ compatible = "nxp,lpc3220-uart";
+ reg = <0x40090000 0x1000>;
+ interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ clocks = <&clk LPC32XX_CLK_UART5>;
+ status = "disabled";
+ };
+
+ uart3: serial@40080000 {
+ compatible = "nxp,lpc3220-uart";
+ reg = <0x40080000 0x1000>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ clocks = <&clk LPC32XX_CLK_UART3>;
+ status = "disabled";
+ };
+
+ uart4: serial@40088000 {
+ compatible = "nxp,lpc3220-uart";
+ reg = <0x40088000 0x1000>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ clocks = <&clk LPC32XX_CLK_UART4>;
+ status = "disabled";
+ };
+
+ uart6: serial@40098000 {
+ compatible = "nxp,lpc3220-uart";
+ reg = <0x40098000 0x1000>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ clocks = <&clk LPC32XX_CLK_UART6>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@400a0000 {
+ compatible = "nxp,pnx-i2c";
+ reg = <0x400a0000 0x100>;
+ interrupt-parent = <&sic1>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk LPC32XX_CLK_I2C1>;
+ };
+
+ i2c2: i2c@400a8000 {
+ compatible = "nxp,pnx-i2c";
+ reg = <0x400a8000 0x100>;
+ interrupt-parent = <&sic1>;
+ interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk LPC32XX_CLK_I2C2>;
+ };
+
+ mpwm: mpwm@400e8000 {
+ compatible = "nxp,lpc3220-motor-pwm";
+ reg = <0x400e8000 0x78>;
+ status = "disabled";
+ #pwm-cells = <2>;
+ };
+ };
+
+ fab {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x20000000 0x20000000 0x30000000>;
+
+ /* System Control Block */
+ scb {
+ compatible = "simple-bus";
+ ranges = <0x0 0x40004000 0x00001000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ clk: clock-controller@0 {
+ compatible = "nxp,lpc3220-clk";
+ reg = <0x00 0x114>;
+ #clock-cells = <1>;
+
+ clocks = <&xtal_32k>, <&xtal>;
+ clock-names = "xtal_32k", "xtal";
+ };
+ };
+
+ mic: interrupt-controller@40008000 {
+ compatible = "nxp,lpc3220-mic";
+ reg = <0x40008000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sic1: interrupt-controller@4000c000 {
+ compatible = "nxp,lpc3220-sic";
+ reg = <0x4000c000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&mic>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>,
+ <30 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ sic2: interrupt-controller@40010000 {
+ compatible = "nxp,lpc3220-sic";
+ reg = <0x40010000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&mic>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>,
+ <31 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ uart1: serial@40014000 {
+ compatible = "nxp,lpc3220-hsuart";
+ reg = <0x40014000 0x1000>;
+ interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart2: serial@40018000 {
+ compatible = "nxp,lpc3220-hsuart";
+ reg = <0x40018000 0x1000>;
+ interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart7: serial@4001c000 {
+ compatible = "nxp,lpc3220-hsuart";
+ reg = <0x4001c000 0x1000>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ rtc: rtc@40024000 {
+ compatible = "nxp,lpc3220-rtc";
+ reg = <0x40024000 0x1000>;
+ interrupt-parent = <&sic1>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_RTC>;
+ };
+
+ gpio: gpio@40028000 {
+ compatible = "nxp,lpc3220-gpio";
+ reg = <0x40028000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <3>; /* bank, pin, flags */
+ };
+
+ timer4: timer@4002c000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x4002c000 0x1000>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk LPC32XX_CLK_TIMER4>;
+ clock-names = "timerclk";
+ status = "disabled";
+ };
+
+ timer5: timer@40030000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x40030000 0x1000>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk LPC32XX_CLK_TIMER5>;
+ clock-names = "timerclk";
+ status = "disabled";
+ };
+
+ watchdog: watchdog@4003c000 {
+ compatible = "nxp,pnx4008-wdt";
+ reg = <0x4003c000 0x1000>;
+ clocks = <&clk LPC32XX_CLK_WDOG>;
+ };
+
+ timer0: timer@40044000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x40044000 0x1000>;
+ clocks = <&clk LPC32XX_CLK_TIMER0>;
+ clock-names = "timerclk";
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ /*
+ * TSC vs. ADC: Since those two share the same
+ * hardware, you need to choose from one of the
+ * following two and do 'status = "okay";' for one of
+ * them
+ */
+
+ adc: adc@40048000 {
+ compatible = "nxp,lpc3220-adc";
+ reg = <0x40048000 0x1000>;
+ interrupt-parent = <&sic1>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_ADC>;
+ status = "disabled";
+ };
+
+ tsc: tsc@40048000 {
+ compatible = "nxp,lpc3220-tsc";
+ reg = <0x40048000 0x1000>;
+ interrupt-parent = <&sic1>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk LPC32XX_CLK_ADC>;
+ status = "disabled";
+ };
+
+ timer1: timer@4004c000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x4004c000 0x1000>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk LPC32XX_CLK_TIMER1>;
+ clock-names = "timerclk";
+ };
+
+ key: key@40050000 {
+ compatible = "nxp,lpc3220-key";
+ reg = <0x40050000 0x1000>;
+ clocks = <&clk LPC32XX_CLK_KEY>;
+ interrupt-parent = <&sic1>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer2: timer@40058000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x40058000 0x1000>;
+ interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk LPC32XX_CLK_TIMER2>;
+ clock-names = "timerclk";
+ status = "disabled";
+ };
+
+ pwm1: pwm@4005c000 {
+ compatible = "nxp,lpc3220-pwm";
+ reg = <0x4005c000 0x4>;
+ clocks = <&clk LPC32XX_CLK_PWM1>;
+ assigned-clocks = <&clk LPC32XX_CLK_PWM1>;
+ assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@4005c004 {
+ compatible = "nxp,lpc3220-pwm";
+ reg = <0x4005c004 0x4>;
+ clocks = <&clk LPC32XX_CLK_PWM2>;
+ assigned-clocks = <&clk LPC32XX_CLK_PWM2>;
+ assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
+ status = "disabled";
+ };
+
+ timer3: timer@40060000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x40060000 0x1000>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk LPC32XX_CLK_TIMER3>;
+ clock-names = "timerclk";
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/src/arm/nxp/lpc/lpc4337-ciaa.dts b/src/arm/nxp/lpc/lpc4337-ciaa.dts
new file mode 100644
index 0000000..beddaba
--- /dev/null
+++ b/src/arm/nxp/lpc/lpc4337-ciaa.dts
@@ -0,0 +1,221 @@
+/*
+ * CIAA NXP LPC4337 (http://www.proyecto-ciaa.com.ar)
+ *
+ * Copyright (C) 2015 VanguardiaSur - www.vanguardiasur.com.ar
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ */
+/dts-v1/;
+
+#include "lpc18xx.dtsi"
+#include "lpc4357.dtsi"
+
+#include "dt-bindings/gpio/gpio.h"
+
+/ {
+ model = "CIAA NXP LPC4337";
+ compatible = "ciaa,lpc4337", "nxp,lpc4337", "nxp,lpc4350";
+
+ aliases {
+ serial0 = &uart2;
+ serial1 = &uart3;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ stdout-path = &uart2;
+ };
+
+ memory@28000000 {
+ device_type = "memory";
+ reg = <0x28000000 0x0800000>; /* 8 MB */
+ };
+};
+
+&pinctrl {
+ enet_rmii_pins: enet-rmii-pins {
+ enet_rmii_rxd_cfg {
+ pins = "p1_15", "p0_0";
+ function = "enet";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ enet_rmii_txd_cfg {
+ pins = "p1_18", "p1_20";
+ function = "enet";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ enet_rmii_rx_dv_cfg {
+ pins = "p1_16";
+ function = "enet";
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ enet_rmii_tx_en_cfg {
+ pins = "p0_1";
+ function = "enet";
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ enet_ref_clk_cfg {
+ pins = "p1_19";
+ function = "enet";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ enet_mdio_cfg {
+ pins = "p1_17";
+ function = "enet";
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ enet_mdc_cfg {
+ pins = "p7_7";
+ function = "enet";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+ };
+
+ i2c0_pins: i2c0-pins {
+ i2c0_pins_cfg {
+ pins = "i2c0_scl", "i2c0_sda";
+ function = "i2c0";
+ input-enable;
+ };
+ };
+
+ ssp_pins: ssp-pins {
+ ssp1_cs {
+ pins = "p6_7";
+ function = "gpio";
+ bias-pull-up;
+ bias-disable;
+ };
+
+ ssp1_miso_mosi {
+ pins = "p1_3", "p1_4";
+ function = "ssp1";
+ slew-rate = <1>;
+ bias-pull-down;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ ssp1_sck {
+ pins = "pf_4";
+ function = "ssp1";
+ slew-rate = <1>;
+ bias-disable;
+ };
+ };
+
+ uart2_pins: uart2-pins {
+ uart2_rx_cfg {
+ pins = "p7_2";
+ function = "uart2";
+ bias-disable;
+ input-enable;
+ };
+
+ uart2_tx_cfg {
+ pins = "p7_1";
+ function = "uart2";
+ bias-disable;
+ };
+ };
+
+ uart3_pins: uart3-pins {
+ uart3_rx_cfg {
+ pins = "p2_4";
+ function = "uart3";
+ bias-disable;
+ input-enable;
+ };
+
+ uart3_tx_cfg {
+ pins = "p2_3";
+ function = "uart3";
+ bias-disable;
+ };
+ };
+};
+
+&enet_tx_clk {
+ clock-frequency = <50000000>;
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+
+ eeprom@50 {
+ compatible = "microchip,24c512", "atmel,24c512";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "microchip,24c02", "atmel,24c02";
+ reg = <0x51>;
+ };
+
+ eeprom@54 {
+ compatible = "microchip,24c512", "atmel,24c512";
+ reg = <0x54>;
+ };
+};
+
+&mac {
+ status = "okay";
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&enet_rmii_pins>;
+};
+
+&sct_pwm {
+ status = "okay";
+};
+
+&ssp1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ssp_pins>;
+ cs-gpios = <&gpio LPC_GPIO(5,15) GPIO_ACTIVE_HIGH>;
+ num-cs = <1>;
+};
+
+&uart2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
diff --git a/src/arm/nxp/lpc/lpc4350-hitex-eval.dts b/src/arm/nxp/lpc/lpc4350-hitex-eval.dts
new file mode 100644
index 0000000..93d0c2e
--- /dev/null
+++ b/src/arm/nxp/lpc/lpc4350-hitex-eval.dts
@@ -0,0 +1,481 @@
+/*
+ * Hitex LPC4350 Evaluation Board
+ *
+ * Copyright 2015 Ariel D'Alessandro <ariel.dalessandro@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+/dts-v1/;
+
+#include "lpc18xx.dtsi"
+#include "lpc4350.dtsi"
+
+#include "dt-bindings/input/input.h"
+#include "dt-bindings/gpio/gpio.h"
+
+/ {
+ model = "Hitex LPC4350 Evaluation Board";
+ compatible = "hitex,lpc4350-eval-board", "nxp,lpc4350";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ memory@28000000 {
+ device_type = "memory";
+ reg = <0x28000000 0x800000>; /* 8 MB */
+ };
+
+ pca_buttons {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+ autorepeat;
+
+ button0 {
+ label = "joy:right";
+ linux,code = <KEY_RIGHT>;
+ gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ button1 {
+ label = "joy:up";
+ linux,code = <KEY_UP>;
+ gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+
+ button2 {
+ label = "joy:enter";
+ linux,code = <KEY_ENTER>;
+ gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>;
+ };
+
+ button3 {
+ label = "joy:left";
+ linux,code = <KEY_LEFT>;
+ gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ button4 {
+ label = "joy:down";
+ linux,code = <KEY_DOWN>;
+ gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ button5 {
+ label = "user:sw3";
+ linux,code = <KEY_F1>;
+ gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ button6 {
+ label = "user:sw4";
+ linux,code = <KEY_F2>;
+ gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ button7 {
+ label = "user:sw5";
+ linux,code = <KEY_F3>;
+ gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ pca_leds {
+ compatible = "gpio-leds";
+
+ led0 {
+ label = "ext:led0";
+ gpios = <&pca_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1 {
+ label = "ext:led1";
+ gpios = <&pca_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led2 {
+ label = "ext:led2";
+ gpios = <&pca_gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ led3 {
+ label = "ext:led3";
+ gpios = <&pca_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ vcc: vcc_fixed {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3io";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&pinctrl {
+ adc1_pins: adc1-pins {
+ adc1_pins_cfg {
+ pins = "pf_9";
+ function = "adc";
+ input-disable;
+ bias-disable;
+ };
+ };
+
+ emc_pins: emc-pins {
+ emc_addr0_23_cfg {
+ pins = "p2_9", "p2_10", "p2_11", "p2_12",
+ "p2_13", "p1_0", "p1_1", "p1_2",
+ "p2_8", "p2_7", "p2_6", "p2_2",
+ "p2_1", "p2_0", "p6_8", "p6_7",
+ "pd_16", "pd_15", "pe_0", "pe_1",
+ "pe_2", "pe_3", "pe_4", "pa_4";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_data0_15_cfg {
+ pins = "p1_7", "p1_8", "p1_9", "p1_10",
+ "p1_11", "p1_12", "p1_13", "p1_14",
+ "p5_4", "p5_5", "p5_6", "p5_7",
+ "p5_0", "p5_1", "p5_2", "p5_3";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_we_oe_cfg {
+ pins = "p1_6", "p1_3";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_bls0_3_cfg {
+ pins = "p1_4", "p6_6", "pd_13", "pd_10";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_cs0_cs2_cfg {
+ pins = "p1_5", "pd_12";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_sdram_dqm0_3_cfg {
+ pins = "p6_12", "p6_10", "pd_0", "pe_13";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_sdram_ras_cas_cfg {
+ pins = "p6_5", "p6_4";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_sdram_dycs0_cfg {
+ pins = "p6_9";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_sdram_cke_cfg {
+ pins = "p6_11";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_sdram_clock_cfg {
+ pins = "clk0", "clk1", "clk2", "clk3";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+ };
+
+ enet_mii_pins: enet-mii-pins {
+ enet_mii_rxd0_3_cfg {
+ pins = "p1_15", "p0_0", "p9_3", "p9_2";
+ function = "enet";
+ bias-disable;
+ input-enable;
+ };
+
+ enet_mii_txd0_3_cfg {
+ pins = "p1_18", "p1_20", "p9_4", "p9_5";
+ function = "enet";
+ bias-disable;
+ };
+
+ enet_mii_crs_col_cfg {
+ pins = "p9_0", "p9_6";
+ function = "enet";
+ bias-disable;
+ input-enable;
+ };
+
+ enet_mii_rx_clk_dv_er_cfg {
+ pins = "pc_0", "p1_16", "p9_1";
+ function = "enet";
+ bias-disable;
+ input-enable;
+ };
+
+ enet_mii_tx_clk_en_cfg {
+ pins = "p1_19", "p0_1";
+ function = "enet";
+ bias-disable;
+ input-enable;
+ };
+
+ enet_mdio_cfg {
+ pins = "p1_17";
+ function = "enet";
+ bias-disable;
+ input-enable;
+ };
+
+ enet_mdc_cfg {
+ pins = "pc_1";
+ function = "enet";
+ bias-disable;
+ };
+ };
+
+ i2c0_pins: i2c0-pins {
+ i2c0_pins_cfg {
+ pins = "i2c0_scl", "i2c0_sda";
+ function = "i2c0";
+ input-enable;
+ };
+ };
+
+ spifi_pins: spifi-pins {
+ spifi_clk_cfg {
+ pins = "p3_3";
+ function = "spifi";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ spifi_mosi_miso_sio2_3_cfg {
+ pins = "p3_7", "p3_6", "p3_5", "p3_4";
+ function = "spifi";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ spifi_cs_cfg {
+ pins = "p3_8";
+ function = "spifi";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ uart0_rx_cfg {
+ pins = "pf_11";
+ function = "uart0";
+ input-schmitt-disable;
+ bias-disable;
+ input-enable;
+ };
+
+ uart0_tx_cfg {
+ pins = "pf_10";
+ function = "uart0";
+ bias-pull-down;
+ };
+ };
+};
+
+&adc1 {
+ status = "okay";
+ vref-supply = <&vcc>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&adc1_pins>;
+};
+
+&emc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&emc_pins>;
+
+ cs0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ mpmc,cs = <0>;
+ mpmc,memory-width = <16>;
+ mpmc,byte-lane-low;
+ mpmc,write-enable-delay = <0>;
+ mpmc,output-enable-delay = <0>;
+ mpmc,read-access-delay = <70>;
+ mpmc,page-mode-read-delay = <70>;
+
+ flash@0,0 {
+ compatible = "sst,sst39vf320", "cfi-flash";
+ reg = <0 0 0x400000>;
+ bank-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x000000 0x040000>; /* 256 KiB */
+ };
+
+ partition@1 {
+ label = "kernel";
+ reg = <0x040000 0x2C0000>; /* 2.75 MiB */
+ };
+
+ partition@2 {
+ label = "rootfs";
+ reg = <0x300000 0x100000>; /* 1 MiB */
+ };
+ };
+ };
+
+ cs2 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ mpmc,cs = <2>;
+ mpmc,memory-width = <16>;
+ mpmc,byte-lane-low;
+ mpmc,write-enable-delay = <0>;
+ mpmc,output-enable-delay = <30>;
+ mpmc,read-access-delay = <90>;
+ mpmc,page-mode-read-delay = <55>;
+ mpmc,write-access-delay = <55>;
+ mpmc,turn-round-delay = <55>;
+
+ ext_sram: sram@2,0 {
+ compatible = "mmio-sram";
+ reg = <2 0 0x80000>; /* 512 KiB SRAM on IS62WV25616 */
+ };
+ };
+};
+
+&enet_tx_clk {
+ clock-frequency = <25000000>;
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+
+ /* NXP SE97BTP with temperature sensor + eeprom */
+ sensor@18 {
+ compatible = "nxp,se97", "jedec,jc-42.4-temp";
+ reg = <0x18>;
+ };
+
+ eeprom@50 {
+ compatible = "nxp,24c02", "atmel,24c02";
+ reg = <0x50>;
+ };
+
+ pca_gpio: gpio@24 {
+ compatible = "nxp,pca9673";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&mac {
+ status = "okay";
+ phy-mode = "mii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&enet_mii_pins>;
+};
+
+&spifi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spifi_pins>;
+
+ flash {
+ compatible = "jedec,spi-nor";
+ spi-rx-bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x000000 0x040000>; /* 256 KiB */
+ };
+
+ partition@1 {
+ label = "kernel";
+ reg = <0x040000 0x2c0000>; /* 2.75 MiB */
+ };
+
+ partition@2 {
+ label = "rootfs";
+ reg = <0x300000 0x500000>; /* 5 MiB */
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+};
diff --git a/src/arm/nxp/lpc/lpc4350.dtsi b/src/arm/nxp/lpc/lpc4350.dtsi
new file mode 100644
index 0000000..c4422f5
--- /dev/null
+++ b/src/arm/nxp/lpc/lpc4350.dtsi
@@ -0,0 +1,39 @@
+/*
+ * NXP LPC4350 and LPC4330 SoC
+ *
+ * Copyright 2015 Ariel D'Alessandro <ariel.dalessandro@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+
+/ {
+ compatible = "nxp,lpc4350", "nxp,lpc4330";
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-m4";
+ };
+ };
+
+ soc {
+ sram0: sram@10000000 {
+ compatible = "mmio-sram";
+ reg = <0x10000000 0x20000>; /* 96 + 32 KiB local SRAM */
+ };
+
+ sram1: sram@10080000 {
+ compatible = "mmio-sram";
+ reg = <0x10080000 0x12000>; /* 64 + 8 KiB local SRAM */
+ };
+
+ sram2: sram@20000000 {
+ compatible = "mmio-sram";
+ reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */
+ };
+ };
+};
diff --git a/src/arm/nxp/lpc/lpc4357-ea4357-devkit.dts b/src/arm/nxp/lpc/lpc4357-ea4357-devkit.dts
new file mode 100644
index 0000000..224f80a
--- /dev/null
+++ b/src/arm/nxp/lpc/lpc4357-ea4357-devkit.dts
@@ -0,0 +1,623 @@
+/*
+ * Embedded Artist LPC4357 Developer's Kit
+ *
+ * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+/dts-v1/;
+
+#include "lpc18xx.dtsi"
+#include "lpc4357.dtsi"
+
+#include "dt-bindings/input/input.h"
+#include "dt-bindings/gpio/gpio.h"
+
+/ {
+ model = "Embedded Artists' LPC4357 Developer's Kit";
+ compatible = "ea,lpc4357-developers-kit", "nxp,lpc4357", "nxp,lpc4350";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ memory@28000000 {
+ device_type = "memory";
+ reg = <0x28000000 0x2000000>; /* 32 MB */
+ };
+
+ vcc: vcc_fixed {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ /* vmmc is controlled by sdmmc host internally */
+ vmmc: vmmc_fixed {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ gpio_joystick {
+ compatible = "gpio-keys-polled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_joystick_pins>;
+ poll-interval = <100>;
+ autorepeat;
+
+ button0 {
+ label = "joy_enter";
+ linux,code = <KEY_ENTER>;
+ gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>;
+ };
+
+ button1 {
+ label = "joy_left";
+ linux,code = <KEY_LEFT>;
+ gpios = <&gpio LPC_GPIO(4,9) GPIO_ACTIVE_LOW>;
+ };
+
+ button2 {
+ label = "joy_up";
+ linux,code = <KEY_UP>;
+ gpios = <&gpio LPC_GPIO(4,10) GPIO_ACTIVE_LOW>;
+ };
+
+ button3 {
+ label = "joy_right";
+ linux,code = <KEY_RIGHT>;
+ gpios = <&gpio LPC_GPIO(4,12) GPIO_ACTIVE_LOW>;
+ };
+
+ button4 {
+ label = "joy_down";
+ linux,code = <KEY_DOWN>;
+ gpios = <&gpio LPC_GPIO(4,13) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds_mmio {
+ compatible = "gpio-leds";
+
+ led1 {
+ gpios = <&mmio_leds 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led2 {
+ gpios = <&mmio_leds 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ led3 {
+ gpios = <&mmio_leds 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ led4 {
+ gpios = <&mmio_leds 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ led5 {
+ gpios = <&mmio_leds 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ led6 {
+ gpios = <&mmio_leds 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ led7 {
+ gpios = <&mmio_leds 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ led8 {
+ gpios = <&mmio_leds 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ led9 {
+ gpios = <&mmio_leds 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ led10 {
+ gpios = <&mmio_leds 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ led11 {
+ gpios = <&mmio_leds 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ led12 {
+ gpios = <&mmio_leds 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ led13 {
+ gpios = <&mmio_leds 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ led14 {
+ gpios = <&mmio_leds 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ led15 {
+ gpios = <&mmio_leds 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ led16 {
+ gpios = <&mmio_leds 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pinctrl {
+ emc_pins: emc-pins {
+ emc_addr0_23_cfg {
+ pins = "p2_9", "p2_10", "p2_11", "p2_12",
+ "p2_13", "p1_0", "p1_1", "p1_2",
+ "p2_8", "p2_7", "p2_6", "p2_2",
+ "p2_1", "p2_0", "p6_8", "p6_7",
+ "pd_16", "pd_15", "pe_0", "pe_1",
+ "pe_2", "pe_3", "pe_4", "pa_4";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_data0_31_cfg {
+ pins = "p1_7", "p1_8", "p1_9", "p1_10",
+ "p1_11", "p1_12", "p1_13", "p1_14",
+ "p5_4", "p5_5", "p5_6", "p5_7",
+ "p5_0", "p5_1", "p5_2", "p5_3",
+ "pd_2", "pd_3", "pd_4", "pd_5",
+ "pd_6", "pd_7", "pd_8", "pd_9",
+ "pe_5", "pe_6", "pe_7", "pe_8",
+ "pe_9", "pe_10", "pe_11", "pe_12";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_we_oe_cfg {
+ pins = "p1_6", "p1_3";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_bls0_3_cfg {
+ pins = "p1_4", "p6_6", "pd_13", "pd_10";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_cs0_3_cfg {
+ pins = "p1_5", "p6_3", "pd_12", "pd_11";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_sdram_dqm0_3_cfg {
+ pins = "p6_12", "p6_10", "pd_0", "pe_13";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_sdram_ras_cas_cfg {
+ pins = "p6_5", "p6_4";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_sdram_dycs0_cfg {
+ pins = "p6_9";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_sdram_cke_cfg {
+ pins = "p6_11";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ emc_sdram_clock_cfg {
+ pins = "clk0", "clk1", "clk2", "clk3";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+ };
+
+ enet_rmii_pins: enet-rmii-pins {
+ enet_rmii_rxd_cfg {
+ pins = "p1_15", "p0_0";
+ function = "enet";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ enet_rmii_txd_cfg {
+ pins = "p1_18", "p1_20";
+ function = "enet";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ enet_rmii_rx_dv_cfg {
+ pins = "p1_16";
+ function = "enet";
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ enet_rmii_tx_en_cfg {
+ pins = "p0_1";
+ function = "enet";
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ enet_ref_clk_cfg {
+ pins = "p1_19";
+ function = "enet";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ enet_mdio_cfg {
+ pins = "p1_17";
+ function = "enet";
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ enet_mdc_cfg {
+ pins = "pc_1";
+ function = "enet";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+ };
+
+ gpio_joystick_pins: gpio-joystick-pins {
+ gpio_joystick_cfg {
+ pins = "p9_0", "p9_1", "pa_1", "pa_2", "pa_3";
+ function = "gpio";
+ input-enable;
+ bias-disable;
+ };
+ };
+
+ i2c0_pins: i2c0-pins {
+ i2c0_pins_cfg {
+ pins = "i2c0_scl", "i2c0_sda";
+ function = "i2c0";
+ input-enable;
+ };
+ };
+
+ sdmmc_pins: sdmmc-pins {
+ sdmmc_clk_cfg {
+ pins = "pc_0";
+ function = "sdmmc";
+ slew-rate = <1>;
+ bias-pull-down;
+ };
+
+ sdmmc_cmd_dat0_3_cfg {
+ pins = "pc_4", "pc_5", "pc_6", "pc_7", "pc_10";
+ function = "sdmmc";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ sdmmc_cd_cfg {
+ pins = "pc_8";
+ function = "sdmmc";
+ bias-pull-down;
+ input-enable;
+ };
+
+ sdmmc_pow_cfg {
+ pins = "pc_9";
+ function = "sdmmc";
+ bias-pull-down;
+ };
+ };
+
+ spifi_pins: spifi-pins {
+ spifi_clk_cfg {
+ pins = "p3_3";
+ function = "spifi";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ spifi_mosi_miso_sio2_3_cfg {
+ pins = "p3_7", "p3_6", "p3_5", "p3_4";
+ function = "spifi";
+ slew-rate = <0>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ spifi_cs_cfg {
+ pins = "p3_8";
+ function = "spifi";
+ bias-disable;
+ };
+ };
+
+ ssp0_pins: ssp0-pins {
+ ssp0_sck_miso_mosi {
+ pins = "pf_0", "pf_2", "pf_3";
+ function = "ssp0";
+ slew-rate = <1>;
+ bias-pull-down;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ ssp0_ssel {
+ pins = "pf_1";
+ function = "ssp0";
+ bias-pull-up;
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ uart0_rx_cfg {
+ pins = "pf_11";
+ function = "uart0";
+ input-schmitt-disable;
+ bias-disable;
+ input-enable;
+ };
+
+ uart0_tx_cfg {
+ pins = "pf_10";
+ function = "uart0";
+ bias-pull-down;
+ };
+ };
+
+ uart3_pins: uart3-pins {
+ uart3_rx_cfg {
+ pins = "p2_4";
+ function = "uart3";
+ input-schmitt-disable;
+ bias-disable;
+ input-enable;
+ };
+
+ uart3_tx_cfg {
+ pins = "p9_3";
+ function = "uart3";
+ bias-pull-down;
+ };
+ };
+
+ usb0_pins: usb0-pins {
+ usb0_pwr_enable {
+ pins = "p2_3";
+ function = "usb0";
+ };
+
+ usb0_pwr_fault {
+ pins = "p8_0";
+ function = "usb0";
+ bias-disable;
+ input-enable;
+ };
+ };
+};
+
+&adc0 {
+ status = "okay";
+ vref-supply = <&vcc>;
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+
+ mma7455@1d {
+ compatible = "fsl,mma7455";
+ reg = <0x1d>;
+ };
+
+ lm75@48 {
+ compatible = "nxp,lm75";
+ reg = <0x48>;
+ };
+
+ eeprom@57 {
+ compatible = "microchip,24c64", "atmel,24c64";
+ reg = <0x57>;
+ };
+};
+
+&dac {
+ status = "okay";
+ vref-supply = <&vcc>;
+};
+
+&emc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&emc_pins>;
+
+ cs0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ mpmc,cs = <0>;
+ mpmc,memory-width = <16>;
+ mpmc,byte-lane-low;
+ mpmc,write-enable-delay = <0>;
+ mpmc,output-enable-delay = <0>;
+ mpmc,read-access-delay = <70>;
+ mpmc,page-mode-read-delay = <70>;
+
+ flash@0,0 {
+ compatible = "sst,sst39vf320", "cfi-flash";
+ reg = <0 0 0x400000>;
+ bank-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x000000 0x040000>; /* 256 KiB */
+ };
+
+ partition@1 {
+ label = "kernel";
+ reg = <0x040000 0x2c0000>; /* 2.75 MiB */
+ };
+
+ partition@2 {
+ label = "rootfs";
+ reg = <0x300000 0x100000>; /* 1 MiB */
+ };
+ };
+ };
+
+ cs2 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ mpmc,cs = <2>;
+ mpmc,memory-width = <16>;
+
+ mmio_leds: gpio@2,0 {
+ compatible = "ti,7416374";
+ reg = <2 0 0x2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ };
+};
+
+&enet_tx_clk {
+ clock-frequency = <50000000>;
+};
+
+&mac {
+ status = "okay";
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&enet_rmii_pins>;
+};
+
+&mmcsd {
+ status = "okay";
+ bus-width = <4>;
+ vmmc-supply = <&vmmc>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pins>;
+};
+
+&spifi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spifi_pins>;
+
+ flash {
+ compatible = "jedec,spi-nor";
+ spi-cpol;
+ spi-cpha;
+ spi-rx-bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "data";
+ reg = <0 0x200000>;
+ };
+ };
+};
+
+&ssp0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ssp0_pins>;
+ num-cs = <1>;
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+};
+
+&uart3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&usb0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_pins>;
+};
diff --git a/src/arm/nxp/lpc/lpc4357-myd-lpc4357.dts b/src/arm/nxp/lpc/lpc4357-myd-lpc4357.dts
new file mode 100644
index 0000000..1f84654
--- /dev/null
+++ b/src/arm/nxp/lpc/lpc4357-myd-lpc4357.dts
@@ -0,0 +1,619 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * MYIR Tech MYD-LPC4357 Development Board with 800x480 7" TFT panel
+ *
+ * Copyright (C) 2016-2018 Vladimir Zapolskiy <vz@mleia.com>
+ */
+
+/dts-v1/;
+
+#include "lpc18xx.dtsi"
+#include "lpc4357.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "MYIR Tech LPC4357 Development Board";
+ compatible = "myir,myd-lpc4357", "nxp,lpc4357";
+
+ chosen {
+ stdout-path = "serial3:115200n8";
+ };
+
+ memory@28000000 {
+ device_type = "memory";
+ reg = <0x28000000 0x2000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ led1 {
+ gpios = <&gpio LPC_GPIO(6,15) GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led2 {
+ gpios = <&gpio LPC_GPIO(6,16) GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led3 {
+ gpios = <&gpio LPC_GPIO(6,17) GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led4 {
+ gpios = <&gpio LPC_GPIO(6,10) GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led5 {
+ gpios = <&gpio LPC_GPIO(7,14) GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led6 {
+ gpios = <&gpio LPC_GPIO(6,14) GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ panel: panel {
+ compatible = "innolux,at070tn92";
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&lcdc_output>;
+ };
+ };
+ };
+
+ vcc: vcc_fixed {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vmmc: vmmc_fixed {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&pinctrl {
+ can0_pins: can0-pins {
+ can_rd_cfg {
+ pins = "p3_1";
+ function = "can0";
+ input-enable;
+ };
+
+ can_td_cfg {
+ pins = "p3_2";
+ function = "can0";
+ };
+ };
+
+ can1_pins: can1-pins {
+ can_rd_cfg {
+ pins = "pe_1";
+ function = "can1";
+ input-enable;
+ };
+
+ can_td_cfg {
+ pins = "pe_0";
+ function = "can1";
+ };
+ };
+
+ emc_pins: emc-pins {
+ emc_addr0_22_cfg {
+ pins = "p2_9", "p2_10", "p2_11", "p2_12",
+ "p2_13", "p1_0", "p1_1", "p1_2",
+ "p2_8", "p2_7", "p2_6", "p2_2",
+ "p2_1", "p2_0", "p6_8", "p6_7",
+ "pd_16", "pd_15", "pe_0", "pe_1",
+ "pe_2", "pe_3", "pe_4";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ emc_data0_15_cfg {
+ pins = "p1_7", "p1_8", "p1_9", "p1_10",
+ "p1_11", "p1_12", "p1_13", "p1_14",
+ "p5_4", "p5_5", "p5_6", "p5_7",
+ "p5_0", "p5_1", "p5_2", "p5_3";
+ function = "emc";
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ emc_we_oe_cfg {
+ pins = "p1_6", "p1_3";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ emc_cs0_cfg {
+ pins = "p1_5";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ emc_sdram_dqm0_1_cfg {
+ pins = "p6_12", "p6_10";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ emc_sdram_ras_cas_cfg {
+ pins = "p6_5", "p6_4";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ emc_sdram_dycs0_cfg {
+ pins = "p6_9";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ emc_sdram_cke_cfg {
+ pins = "p6_11";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ emc_sdram_clock_cfg {
+ pins = "clk0";
+ function = "emc";
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <1>;
+ bias-disable;
+ };
+ };
+
+ enet_rmii_pins: enet-rmii-pins {
+ enet_rmii_rxd_cfg {
+ pins = "p1_15", "p0_0";
+ function = "enet";
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ enet_rmii_txd_cfg {
+ pins = "p1_18", "p1_20";
+ function = "enet";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ enet_rmii_rx_dv_cfg {
+ pins = "p1_16";
+ function = "enet";
+ input-enable;
+ input-schmitt-disable;
+ bias-disable;
+ };
+
+ enet_mdio_cfg {
+ pins = "p1_17";
+ function = "enet";
+ input-enable;
+ input-schmitt-disable;
+ bias-disable;
+ };
+
+ enet_mdc_cfg {
+ pins = "pc_1";
+ function = "enet";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ enet_rmii_tx_en_cfg {
+ pins = "p0_1";
+ function = "enet";
+ bias-disable;
+ };
+
+ enet_ref_clk_cfg {
+ pins = "p1_19";
+ function = "enet";
+ slew-rate = <1>;
+ input-enable;
+ input-schmitt-disable;
+ bias-disable;
+ };
+ };
+
+ i2c0_pins: i2c0-pins {
+ i2c0_pins_cfg {
+ pins = "i2c0_scl", "i2c0_sda";
+ function = "i2c0";
+ input-enable;
+ };
+ };
+
+ i2c1_pins: i2c1-pins {
+ i2c1_pins_cfg {
+ pins = "pe_15", "pe_13";
+ function = "i2c1";
+ input-enable;
+ };
+ };
+
+ lcd_pins: lcd-pins {
+ lcd_vd0_23_cfg {
+ pins = "p4_1", "p4_4", "p4_3", "p4_2",
+ "p8_7", "p8_6", "p8_5", "p8_4",
+ "p7_5", "p4_8", "p4_10", "p4_9",
+ "p8_3", "pb_6", "pb_5", "pb_4",
+ "p7_4", "p7_3", "p7_2", "p7_1",
+ "pb_3", "pb_2", "pb_1", "pb_0";
+ function = "lcd";
+ };
+
+ lcd_vsync_en_dclk_lp_pwr_cfg {
+ pins = "p4_5", "p4_6", "p4_7", "p7_6", "p7_7";
+ function = "lcd";
+ };
+ };
+
+ led_pins: led-pins {
+ led_1_6_cfg {
+ pins = "pd_1", "pd_2", "pd_3", "pc_11", "pe_14", "pd_0";
+ function = "gpio";
+ bias-pull-down;
+ };
+ };
+
+ sdmmc_pins: sdmmc-pins {
+ sdmmc_clk_cfg {
+ pins = "pc_0";
+ function = "sdmmc";
+ slew-rate = <1>;
+ bias-pull-down;
+ };
+
+ sdmmc_cmd_dat0_3_cfg {
+ pins = "pc_4", "pc_5", "pc_6", "pc_7", "pc_10";
+ function = "sdmmc";
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ sdmmc_cd_cfg {
+ pins = "pc_8";
+ function = "sdmmc";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+
+ spifi_pins: spifi-pins {
+ spifi_sck_cfg {
+ pins = "p3_3";
+ function = "spifi";
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ spifi_mosi_miso_sio2_sio3_cfg {
+ pins = "p3_7", "p3_6", "p3_5", "p3_4";
+ function = "spifi";
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ spifi_cs_cfg {
+ pins = "p3_8";
+ function = "spifi";
+ bias-disable;
+ };
+ };
+
+ ssp1_pins: ssp1-pins {
+ ssp1_sck_cfg {
+ pins = "pf_4";
+ function = "ssp1";
+ slew-rate = <1>;
+ bias-pull-down;
+ };
+
+ ssp1_miso_cfg {
+ pins = "pf_6";
+ function = "ssp1";
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <1>;
+ bias-pull-down;
+ };
+
+ ssp1_mosi_cfg {
+ pins = "pf_7";
+ function = "ssp1";
+ slew-rate = <1>;
+ bias-pull-down;
+ };
+
+ ssp1_ssel_cfg {
+ pins = "pf_5";
+ function = "gpio";
+ bias-disable;
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ uart0_rxd_cfg {
+ pins = "pf_11";
+ function = "uart0";
+ input-enable;
+ input-schmitt-disable;
+ bias-disable;
+ };
+
+ uart0_clk_dir_txd_cfg {
+ pins = "pf_8", "pf_9", "pf_10";
+ function = "uart0";
+ bias-pull-down;
+ };
+ };
+
+ uart1_pins: uart1-pins {
+ uart1_rxd_cfg {
+ pins = "pc_14";
+ function = "uart1";
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ uart1_dtr_txd_cfg {
+ pins = "pc_12", "pc_13";
+ function = "uart1";
+ bias-pull-down;
+ };
+ };
+
+ uart2_pins: uart2-pins {
+ uart2_rxd_cfg {
+ pins = "pa_2";
+ function = "uart2";
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ uart2_txd_cfg {
+ pins = "pa_1";
+ function = "uart2";
+ bias-pull-down;
+ };
+ };
+
+ uart3_pins: uart3-pins {
+ uart3_rx_cfg {
+ pins = "p2_4";
+ function = "uart3";
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ uart3_tx_cfg {
+ pins = "p2_3";
+ function = "uart3";
+ bias-pull-down;
+ };
+ };
+
+ usb0_pins: usb0-pins {
+ usb0_pwr_enable_cfg {
+ pins = "p6_3";
+ function = "usb0";
+ };
+
+ usb0_pwr_fault_cfg {
+ pins = "p8_0";
+ function = "usb0";
+ bias-disable;
+ input-enable;
+ };
+ };
+};
+
+&adc1 {
+ status = "okay";
+ vref-supply = <&vcc>;
+};
+
+&can0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&can0_pins>;
+};
+
+/* Pin conflict with EMC, muxed by JP5 and JP6 */
+&can1 {
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&can1_pins>;
+};
+
+&emc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&emc_pins>;
+
+ cs0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ mpmc,cs = <0>;
+ mpmc,memory-width = <16>;
+ mpmc,byte-lane-low;
+ mpmc,write-enable-delay = <0>;
+ mpmc,output-enable-delay = <0>;
+ mpmc,read-access-delay = <70>;
+ mpmc,page-mode-read-delay = <70>;
+
+ /* SST/Microchip SST39VF1601 */
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x400000>;
+ bank-width = <2>;
+ };
+ };
+};
+
+&enet_tx_clk {
+ clock-frequency = <50000000>;
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <400000>;
+
+ sensor@49 {
+ compatible = "lm75";
+ reg = <0x49>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c512";
+ reg = <0x50>;
+ };
+};
+
+&lcdc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins>;
+
+ max-memory-bandwidth = <92240000>;
+
+ port {
+ lcdc_output: endpoint {
+ remote-endpoint = <&panel_input>;
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+ };
+ };
+};
+
+&mac {
+ status = "okay";
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&enet_rmii_pins>;
+ phy-handle = <&phy1>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+};
+
+&mmcsd {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pins>;
+ bus-width = <4>;
+ vmmc-supply = <&vmmc>;
+};
+
+/* Pin conflict with SSP0, the latter is routed to J17 pin header */
+&spifi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spifi_pins>;
+
+ /* Atmel AT25DF321A */
+ flash {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <51000000>;
+ spi-cpol;
+ spi-cpha;
+ };
+};
+
+&ssp1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ssp1_pins>;
+ num-cs = <1>;
+ cs-gpios = <&gpio LPC_GPIO(7,19) GPIO_ACTIVE_LOW>;
+};
+
+/* Routed to J17 pin header */
+&uart0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+};
+
+/* RS485 */
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+};
+
+/* Routed to J17 pin header */
+&uart2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&usb0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_pins>;
+};
diff --git a/src/arm/nxp/lpc/lpc4357.dtsi b/src/arm/nxp/lpc/lpc4357.dtsi
new file mode 100644
index 0000000..72f12db
--- /dev/null
+++ b/src/arm/nxp/lpc/lpc4357.dtsi
@@ -0,0 +1,43 @@
+/*
+ * NXP LPC435x, LPC433x, LPC4327, LPC4325, LPC4317 and LPC4315 SoC
+ *
+ * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+
+/ {
+ compatible = "nxp,lpc4357";
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-m4";
+ };
+ };
+
+ soc {
+ sram0: sram@10000000 {
+ compatible = "mmio-sram";
+ reg = <0x10000000 0x8000>; /* 32 KiB local SRAM */
+ };
+
+ sram1: sram@10080000 {
+ compatible = "mmio-sram";
+ reg = <0x10080000 0xa000>; /* 32 + 8 KiB local SRAM */
+ };
+
+ sram2: sram@20000000 {
+ compatible = "mmio-sram";
+ reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */
+ };
+ };
+};
+
+&eeprom {
+ status = "okay";
+};