Squashed 'dts/upstream/' content from commit aaba2d45dc2a

git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/arm/nxp/imx/imx53.dtsi b/src/arm/nxp/imx/imx53.dtsi
new file mode 100644
index 0000000..07658e4
--- /dev/null
+++ b/src/arm/nxp/imx/imx53.dtsi
@@ -0,0 +1,859 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include "imx53-pinfunc.h"
+#include <dt-bindings/clock/imx5-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		gpio6 = &gpio7;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		ipu0 = &ipu;
+		mmc0 = &esdhc1;
+		mmc1 = &esdhc2;
+		mmc2 = &esdhc3;
+		mmc3 = &esdhc4;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &cspi;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+			clocks = <&clks IMX5_CLK_ARM>;
+			clock-latency = <61036>;
+			voltage-tolerance = <5>;
+			operating-points = <
+				/* kHz */
+				 166666  850000
+				 400000  900000
+				 800000 1050000
+				1000000 1200000
+				1200000 1300000
+			>;
+		};
+	};
+
+	display-subsystem {
+		compatible = "fsl,imx-display-subsystem";
+		ports = <&ipu_di0>, <&ipu_di1>;
+	};
+
+	capture_subsystem {
+		compatible = "fsl,imx-capture-subsystem";
+		ports = <&ipu_csi0>, <&ipu_csi1>;
+	};
+
+	tzic: tz-interrupt-controller@fffc000 {
+		compatible = "fsl,imx53-tzic", "fsl,tzic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x0fffc000 0x4000>;
+	};
+
+	clocks {
+		ckil {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		ckih1 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <22579200>;
+		};
+
+		ckih2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupt-parent = <&tzic>;
+		interrupts = <77>;
+	};
+
+	usbphy0: usbphy-0 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+		status = "okay";
+	};
+
+	usbphy1: usbphy-1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+		status = "okay";
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&tzic>;
+		ranges;
+
+		sata: sata@10000000 {
+			compatible = "fsl,imx53-ahci";
+			reg = <0x10000000 0x1000>;
+			interrupts = <28>;
+			clocks = <&clks IMX5_CLK_SATA_GATE>,
+				 <&clks IMX5_CLK_SATA_REF>,
+				 <&clks IMX5_CLK_AHB>;
+			clock-names = "sata", "sata_ref", "ahb";
+			status = "disabled";
+		};
+
+		ipu: ipu@18000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,imx53-ipu";
+			reg = <0x18000000 0x08000000>;
+			interrupts = <11 10>;
+			clocks = <&clks IMX5_CLK_IPU_GATE>,
+				 <&clks IMX5_CLK_IPU_DI0_GATE>,
+				 <&clks IMX5_CLK_IPU_DI1_GATE>;
+			clock-names = "bus", "di0", "di1";
+			resets = <&src 2>;
+
+			ipu_csi0: port@0 {
+				reg = <0>;
+
+				ipu_csi0_from_parallel_sensor: endpoint {
+				};
+			};
+
+			ipu_csi1: port@1 {
+				reg = <1>;
+
+				ipu_csi1_from_parallel_sensor: endpoint {
+				};
+			};
+
+			ipu_di0: port@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				ipu_di0_disp0: endpoint@0 {
+					reg = <0>;
+				};
+
+				ipu_di0_lvds0: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&lvds0_in>;
+				};
+			};
+
+			ipu_di1: port@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				ipu_di1_disp1: endpoint@0 {
+					reg = <0>;
+				};
+
+				ipu_di1_lvds1: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&lvds1_in>;
+				};
+
+				ipu_di1_tve: endpoint@2 {
+					reg = <2>;
+					remote-endpoint = <&tve_in>;
+				};
+			};
+		};
+
+		gpu: gpu@30000000 {
+			compatible = "amd,imageon-200.0", "amd,imageon";
+			reg = <0x30000000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <12>;
+			interrupt-names = "kgsl_3d0_irq";
+			clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>;
+			clock-names = "core_clk", "mem_iface_clk";
+		};
+
+		aips1: bus@50000000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x50000000 0x10000000>;
+			ranges;
+
+			spba-bus@50000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x50000000 0x40000>;
+				ranges;
+
+				esdhc1: mmc@50004000 {
+					compatible = "fsl,imx53-esdhc";
+					reg = <0x50004000 0x4000>;
+					interrupts = <1>;
+					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				esdhc2: mmc@50008000 {
+					compatible = "fsl,imx53-esdhc";
+					reg = <0x50008000 0x4000>;
+					interrupts = <2>;
+					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				uart3: serial@5000c000 {
+					compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+					reg = <0x5000c000 0x4000>;
+					interrupts = <33>;
+					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+						 <&clks IMX5_CLK_UART3_PER_GATE>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 42 4 0>, <&sdma 43 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi1: spi@50010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx53-ecspi";
+					reg = <0x50010000 0x4000>;
+					interrupts = <36>;
+					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+						 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ssi2: ssi@50014000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx53-ssi",
+							"fsl,imx51-ssi",
+							"fsl,imx21-ssi";
+					reg = <0x50014000 0x4000>;
+					interrupts = <30>;
+					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>,
+						 <&clks IMX5_CLK_SSI2_ROOT_GATE>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 24 1 0>,
+					       <&sdma 25 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				esdhc3: mmc@50020000 {
+					compatible = "fsl,imx53-esdhc";
+					reg = <0x50020000 0x4000>;
+					interrupts = <3>;
+					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				esdhc4: mmc@50024000 {
+					compatible = "fsl,imx53-esdhc";
+					reg = <0x50024000 0x4000>;
+					interrupts = <4>;
+					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+			};
+
+			aipstz1: bridge@53f00000 {
+				compatible = "fsl,imx53-aipstz";
+				reg = <0x53f00000 0x60>;
+			};
+
+			usbotg: usb@53f80000 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80000 0x0200>;
+				interrupts = <18>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,usbphy = <&usbphy0>;
+				status = "disabled";
+			};
+
+			usbh1: usb@53f80200 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80200 0x0200>;
+				interrupts = <14>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 1>;
+				fsl,usbphy = <&usbphy1>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbh2: usb@53f80400 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80400 0x0200>;
+				interrupts = <16>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 2>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbh3: usb@53f80600 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80600 0x0200>;
+				interrupts = <17>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 3>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@53f80800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx53-usbmisc";
+				reg = <0x53f80800 0x200>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+			};
+
+			gpio1: gpio@53f84000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53f84000 0x4000>;
+				interrupts = <50 51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@53f88000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53f88000 0x4000>;
+				interrupts = <52 53>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@53f8c000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53f8c000 0x4000>;
+				interrupts = <54 55>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@53f90000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53f90000 0x4000>;
+				interrupts = <56 57>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			kpp: kpp@53f94000 {
+				compatible = "fsl,imx53-kpp", "fsl,imx21-kpp";
+				reg = <0x53f94000 0x4000>;
+				interrupts = <60>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			wdog1: watchdog@53f98000 {
+				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
+				reg = <0x53f98000 0x4000>;
+				interrupts = <58>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+			};
+
+			wdog2: watchdog@53f9c000 {
+				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
+				reg = <0x53f9c000 0x4000>;
+				interrupts = <59>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			gpt: timer@53fa0000 {
+				compatible = "fsl,imx53-gpt", "fsl,imx31-gpt";
+				reg = <0x53fa0000 0x4000>;
+				interrupts = <39>;
+				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+					 <&clks IMX5_CLK_GPT_HF_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			srtc: rtc@53fa4000 {
+				compatible = "fsl,imx53-rtc";
+				reg = <0x53fa4000 0x4000>;
+				interrupts = <24>;
+				clocks = <&clks IMX5_CLK_SRTC_GATE>;
+			};
+
+			iomuxc: iomuxc@53fa8000 {
+				compatible = "fsl,imx53-iomuxc";
+				reg = <0x53fa8000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@53fa8000 {
+				compatible = "fsl,imx53-iomuxc-gpr", "syscon";
+				reg = <0x53fa8000 0xc>;
+			};
+
+			ldb: ldb@53fa8008 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-ldb";
+				reg = <0x53fa8008 0x4>;
+				gpr = <&gpr>;
+				clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
+					 <&clks IMX5_CLK_LDB_DI1_SEL>,
+					 <&clks IMX5_CLK_IPU_DI0_SEL>,
+					 <&clks IMX5_CLK_IPU_DI1_SEL>,
+					 <&clks IMX5_CLK_LDB_DI0_GATE>,
+					 <&clks IMX5_CLK_LDB_DI1_GATE>;
+				clock-names = "di0_pll", "di1_pll",
+					      "di0_sel", "di1_sel",
+					      "di0", "di1";
+				status = "disabled";
+
+				lvds-channel@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					status = "disabled";
+
+					port@0 {
+						reg = <0>;
+
+						lvds0_in: endpoint {
+							remote-endpoint = <&ipu_di0_lvds0>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+					};
+				};
+
+				lvds-channel@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					status = "disabled";
+
+					port@1 {
+						reg = <1>;
+
+						lvds1_in: endpoint {
+							remote-endpoint = <&ipu_di1_lvds1>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+					};
+				};
+			};
+
+			pwm1: pwm@53fb4000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
+				reg = <0x53fb4000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+					 <&clks IMX5_CLK_PWM1_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <61>;
+			};
+
+			pwm2: pwm@53fb8000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
+				reg = <0x53fb8000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+					 <&clks IMX5_CLK_PWM2_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <94>;
+			};
+
+			uart1: serial@53fbc000 {
+				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+				reg = <0x53fbc000 0x4000>;
+				interrupts = <31>;
+				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+					 <&clks IMX5_CLK_UART1_PER_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 18 4 0>, <&sdma 19 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart2: serial@53fc0000 {
+				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+				reg = <0x53fc0000 0x4000>;
+				interrupts = <32>;
+				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+					 <&clks IMX5_CLK_UART2_PER_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 12 4 0>, <&sdma 13 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			can1: can@53fc8000 {
+				compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
+				reg = <0x53fc8000 0x4000>;
+				interrupts = <82>;
+				clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
+					 <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			can2: can@53fcc000 {
+				compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
+				reg = <0x53fcc000 0x4000>;
+				interrupts = <83>;
+				clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,
+					 <&clks IMX5_CLK_CAN2_SERIAL_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			src: reset-controller@53fd0000 {
+				compatible = "fsl,imx53-src", "fsl,imx51-src";
+				reg = <0x53fd0000 0x4000>;
+				interrupts = <75>;
+				#reset-cells = <1>;
+			};
+
+			clks: ccm@53fd4000 {
+				compatible = "fsl,imx53-ccm";
+				reg = <0x53fd4000 0x4000>;
+				interrupts = <0 71 0x04 0 72 0x04>;
+				#clock-cells = <1>;
+			};
+
+			gpio5: gpio@53fdc000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53fdc000 0x4000>;
+				interrupts = <103 104>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio6: gpio@53fe0000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53fe0000 0x4000>;
+				interrupts = <105 106>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio7: gpio@53fe4000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53fe4000 0x4000>;
+				interrupts = <107 108>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			i2c3: i2c@53fec000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
+				reg = <0x53fec000 0x4000>;
+				interrupts = <64>;
+				clocks = <&clks IMX5_CLK_I2C3_GATE>;
+				status = "disabled";
+			};
+
+			uart4: serial@53ff0000 {
+				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+				reg = <0x53ff0000 0x4000>;
+				interrupts = <13>;
+				clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
+					 <&clks IMX5_CLK_UART4_PER_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 2 4 0>, <&sdma 3 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+		};
+
+		aips2: bus@60000000 {	/* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x60000000 0x10000000>;
+			ranges;
+
+			aipstz2: bridge@63f00000 {
+				compatible = "fsl,imx53-aipstz";
+				reg = <0x63f00000 0x60>;
+			};
+
+			iim: efuse@63f98000 {
+				compatible = "fsl,imx53-iim", "fsl,imx27-iim", "syscon";
+				reg = <0x63f98000 0x4000>;
+				interrupts = <69>;
+				clocks = <&clks IMX5_CLK_IIM_GATE>;
+			};
+
+			uart5: serial@63f90000 {
+				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+				reg = <0x63f90000 0x4000>;
+				interrupts = <86>;
+				clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
+					 <&clks IMX5_CLK_UART5_PER_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 16 4 0>, <&sdma 17 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			tigerp: tigerp@63fa0000 {
+				compatible = "fsl,imx53-tigerp", "fsl,imx51-tigerp";
+				reg = <0x63fa0000 0x28>;
+			};
+
+			owire: owire@63fa4000 {
+				compatible = "fsl,imx53-owire", "fsl,imx21-owire";
+				reg = <0x63fa4000 0x4000>;
+				clocks = <&clks IMX5_CLK_OWIRE_GATE>;
+				status = "disabled";
+			};
+
+			ecspi2: spi@63fac000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-ecspi";
+				reg = <0x63fac000 0x4000>;
+				interrupts = <37>;
+				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+					 <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			sdma: dma-controller@63fb0000 {
+				compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
+				reg = <0x63fb0000 0x4000>;
+				interrupts = <6>;
+				clocks = <&clks IMX5_CLK_SDMA_GATE>,
+					 <&clks IMX5_CLK_AHB>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+			};
+
+			cspi: spi@63fc0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
+				reg = <0x63fc0000 0x4000>;
+				interrupts = <38>;
+				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+					 <&clks IMX5_CLK_CSPI_IPG_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c2: i2c@63fc4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
+				reg = <0x63fc4000 0x4000>;
+				interrupts = <63>;
+				clocks = <&clks IMX5_CLK_I2C2_GATE>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@63fc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
+				reg = <0x63fc8000 0x4000>;
+				interrupts = <62>;
+				clocks = <&clks IMX5_CLK_I2C1_GATE>;
+				status = "disabled";
+			};
+
+			ssi1: ssi@63fcc000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
+						"fsl,imx21-ssi";
+				reg = <0x63fcc000 0x4000>;
+				interrupts = <29>;
+				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>,
+					 <&clks IMX5_CLK_SSI1_ROOT_GATE>;
+				clock-names = "ipg", "baud";
+				dmas = <&sdma 28 0 0>,
+				       <&sdma 29 0 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			audmux: audmux@63fd0000 {
+				compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
+				reg = <0x63fd0000 0x4000>;
+				status = "disabled";
+			};
+
+			nfc: nand@63fdb000 {
+				compatible = "fsl,imx53-nand";
+				reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
+				interrupts = <8>;
+				clocks = <&clks IMX5_CLK_NFC_GATE>;
+				status = "disabled";
+			};
+
+			ssi3: ssi@63fe8000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
+						"fsl,imx21-ssi";
+				reg = <0x63fe8000 0x4000>;
+				interrupts = <96>;
+				clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>,
+					 <&clks IMX5_CLK_SSI3_ROOT_GATE>;
+				clock-names = "ipg", "baud";
+				dmas = <&sdma 46 0 0>,
+				       <&sdma 47 0 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			fec: ethernet@63fec000 {
+				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
+				reg = <0x63fec000 0x4000>;
+				interrupts = <87>;
+				clocks = <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+
+			tve: tve@63ff0000 {
+				compatible = "fsl,imx53-tve";
+				reg = <0x63ff0000 0x1000>;
+				interrupts = <92>;
+				clocks = <&clks IMX5_CLK_TVE_GATE>,
+					 <&clks IMX5_CLK_IPU_DI1_SEL>;
+				clock-names = "tve", "di_sel";
+				status = "disabled";
+
+				port {
+					tve_in: endpoint {
+						remote-endpoint = <&ipu_di1_tve>;
+					};
+				};
+			};
+
+			vpu: vpu@63ff4000 {
+				compatible = "fsl,imx53-vpu", "cnm,coda7541";
+				reg = <0x63ff4000 0x1000>;
+				interrupts = <9>;
+				clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
+					 <&clks IMX5_CLK_VPU_GATE>;
+				clock-names = "per", "ahb";
+				resets = <&src 1>;
+				iram = <&ocram>;
+			};
+
+			sahara: crypto@63ff8000 {
+				compatible = "fsl,imx53-sahara";
+				reg = <0x63ff8000 0x4000>;
+				interrupts = <19 20>;
+				clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
+					 <&clks IMX5_CLK_SAHARA_IPG_GATE>;
+				clock-names = "ipg", "ahb";
+			};
+		};
+
+		ocram: sram@f8000000 {
+			compatible = "mmio-sram";
+			reg = <0xf8000000 0x20000>;
+			ranges = <0 0xf8000000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clks IMX5_CLK_OCRAM>;
+		};
+	};
+};