diff --git a/src/arm/microchip/aks-cdu.dts b/src/arm/microchip/aks-cdu.dts
new file mode 100644
index 0000000..742fcf5
--- /dev/null
+++ b/src/arm/microchip/aks-cdu.dts
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * aks-cdu.dts - Device Tree file for AK signal CDU
+ *
+ * Copyright (C) 2012 AK signal Brno a.s.
+ *               2012 Jiri Prchal <jiri.prchal@aksignal.cz>
+ */
+
+/dts-v1/;
+
+#include "ge863-pro3.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+	};
+
+	ahb {
+		apb {
+			usart0: serial@fffb0000 {
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+				linux,rs485-enabled-at-boot-time;
+				rs485-rts-delay = <0 0>;
+				};
+
+			usart2: serial@fffb8000 {
+				status = "okay";
+				linux,rs485-enabled-at-boot-time;
+				rs485-rts-delay = <0 0>;
+			};
+
+			usart3: serial@fffd0000 {
+				status = "okay";
+				linux,rs485-enabled-at-boot-time;
+				rs485-rts-delay = <0 0>;
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 15 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+
+		ebi: ebi@10000000 {
+			nand_controller: nand-controller {
+				nand: nand@3 {
+					partitions {
+						bootstrap@0 {
+							label = "bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						uboot@40000 {
+							label = "uboot";
+							reg = <0x40000 0x80000>;
+						};
+
+						ubootenv@c0000 {
+							label = "ubootenv";
+							reg = <0xc0000 0x40000>;
+						};
+
+						kernel@100000 {
+							label = "kernel";
+							reg = <0x100000 0x400000>;
+						};
+
+						rootfs@500000 {
+							label = "rootfs";
+							reg = <0x500000 0x7b00000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		red {
+			gpios = <&pioC 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+		};
+
+		green {
+			gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+			default-state = "on";
+		};
+
+		yellow {
+			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		blue {
+			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+	};
+};
diff --git a/src/arm/microchip/animeo_ip.dts b/src/arm/microchip/animeo_ip.dts
new file mode 100644
index 0000000..29936bf
--- /dev/null
+++ b/src/arm/microchip/animeo_ip.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards
+ *
+ *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+/dts-v1/;
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Somfy Animeo IP";
+	compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9";
+
+	aliases {
+		serial0 = &usart1;
+		serial1 = &usart2;
+		serial2 = &usart0;
+		serial3 = &dbgu;
+		serial4 = &usart3;
+		serial5 = &uart0;
+		serial6 = &uart1;
+	};
+
+	chosen {
+		stdout-path = &usart2;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>;
+				linux,rs485-enabled-at-boot-time;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>;
+				linux,rs485-enabled-at-boot-time;
+				status = "okay";
+			};
+
+			usart2: serial@fffb8000 {
+				pinctrl-0 = <&pinctrl_usart2>;
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>;
+				phy-mode = "mii";
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <&pinctrl_mmc0_clk
+					     &pinctrl_mmc0_slot1_cmd_dat0
+					     &pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+				};
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						barebox@0 {
+							label = "barebox";
+							reg = <0x0 0x58000>;
+						};
+
+						u_boot_env@58000 {
+							label = "u_boot_env";
+							reg = <0x58000 0x8000>;
+						};
+
+						ubi@60000 {
+							label = "ubi";
+							reg = <0x60000 0x1FA0000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power_green {
+			label = "power_green";
+			gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		power_red {
+			label = "power_red";
+			gpios = <&pioA 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		tx_green {
+			label = "tx_green";
+			gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		tx_red {
+			label = "tx_red";
+			gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-switch-in {
+			label = "keyswitch_in";
+			gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <28>;
+			wakeup-source;
+		};
+
+		key-error-in {
+			label = "error_in";
+			gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
+			linux,code = <29>;
+			wakeup-source;
+		};
+
+		key-s {
+			label = "btn";
+			gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
+			linux,code = <31>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/src/arm/microchip/at91-ariag25.dts b/src/arm/microchip/at91-ariag25.dts
new file mode 100644
index 0000000..713d18f
--- /dev/null
+++ b/src/arm/microchip/at91-ariag25.dts
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-ariag25.dts - Device Tree file for Acme Systems Aria G25 (AT91SAM9G25 based)
+ *
+ * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com>,
+ *                    Robert Nelson <robertcnelson@gmail.com>
+ */
+/dts-v1/;
+#include "at91sam9g25.dtsi"
+
+/ {
+	model = "Acme Systems Aria G25";
+	compatible = "acme,ariag25", "atmel,at91sam9x5ek",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+
+	aliases {
+		serial5 = &uart0;
+		serial6 = &uart1;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
+	};
+
+	memory@20000000 {
+		/* 128 MB, change this for 256 MB revision */
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* little green LED in middle of Aria G25 module */
+		aria_led {
+			label = "aria_led";
+			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
+			linux,default-trigger = "heartbeat";
+		};
+
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_w1_0>;
+	};
+};
+
+&adc0 {
+	status = "okay";
+	atmel,adc-channels-used = <0xf>;
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+/* TWD2+TCLK2 hidden behind ethernet, so no i2c2 */
+
+&macb0 {
+	phy-mode = "rmii";
+	/*
+	 * following can be overwritten by bootloader:
+	 * for example u-boot 'ftd set' command
+	 */
+	local-mac-address = [00 00 00 00 00 00];
+	status = "okay";
+};
+
+
+&mmc0 {
+	/* N.B. Aria has no SD card detect (CD), assumed present */
+
+	pinctrl-0 = <
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&pinctrl {
+	w1_0 {
+		pinctrl_w1_0: w1_0-0 {
+			atmel,pins = <0 21 0x0 0x1>; /* PA21 PIO, pull-up */
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+/*
+ * UART0/1 pins are marked as GPIO on
+ * Aria documentation.
+ * Change to "okay" if you need additional serial ports
+ */
+&uart0 {
+	status = "disabled";
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&usart0 {
+	pinctrl-0 = <&pinctrl_usart0
+		     &pinctrl_usart0_rts
+		     &pinctrl_usart0_cts>;
+	status = "okay";
+};
+
+&usart1 {
+	pinctrl-0 = <&pinctrl_usart1
+		     /* &pinctrl_usart1_rts */
+		     /* &pinctrl_usart1_cts */
+		    >;
+	status = "okay";
+};
+
+&usart2 {
+	/* cannot activate RTS2+CTS2, clash with
+	 * ethernet on PB0 and PB1 */
+	pinctrl-0 = <&pinctrl_usart2>;
+	status = "okay";
+};
+
+&usart3 {
+	compatible = "atmel,at91sam9260-usart";
+	reg = <0xf8028000 0x200>;
+	interrupts = <8 4 5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart3
+		     /* &pinctrl_usart3_rts */
+		     /* &pinctrl_usart3_cts */
+		    >;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	num-ports = <3>;
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/src/arm/microchip/at91-ariettag25.dts b/src/arm/microchip/at91-ariettag25.dts
new file mode 100644
index 0000000..2c52a71
--- /dev/null
+++ b/src/arm/microchip/at91-ariettag25.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Arietta G25
+ * This device tree is minimal, to activate more peripherals, see:
+ * http://dts.acmesystems.it/arietta/
+ */
+/dts-v1/;
+#include "at91sam9g25.dtsi"
+
+/ {
+	model = "Acme Systems Arietta G25";
+	compatible = "acme,ariettag25", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		arietta_led {
+			label = "arietta_led";
+			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-0 = <
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	num-ports = <3>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/src/arm/microchip/at91-cosino.dtsi b/src/arm/microchip/at91-cosino.dtsi
new file mode 100644
index 0000000..ee0f5da
--- /dev/null
+++ b/src/arm/microchip/at91-cosino.dtsi
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-cosino.dtsi - Device Tree file for Cosino core module
+ *
+ * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it>
+ *			HCE Engineering
+ *
+ * Derived from at91sam9x5ek.dtsi by:
+ *	Copyright (C) 2012 Atmel,
+ *	2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+
+#include "at91sam9g35.dtsi"
+
+/ {
+	model = "HCE Cosino core module";
+	compatible = "hce,cosino", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+};
+
+&adc0 {
+	atmel,adc-ts-wires = <4>;
+	atmel,adc-ts-pressure-threshold = <10000>;
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_addr_nand
+		     &pinctrl_ebi_data_0_7>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	nand-controller {
+		pinctrl-0 = <&pinctrl_nand_oe_we
+			     &pinctrl_nand_cs
+			     &pinctrl_nand_rb>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <4>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				uboot@40000 {
+					label = "u-boot";
+					reg = <0x40000 0x80000>;
+				};
+
+				ubootenv@c0000 {
+					label = "U-Boot Env";
+					reg = <0xc0000 0x140000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x0f800000>;
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-0 = <
+		&pinctrl_board_mmc0
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl {
+	mmc0 {
+		pinctrl_board_mmc0: mmc0-board {
+			atmel,pins =
+				<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
+		};
+	};
+};
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usart0 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/src/arm/microchip/at91-cosino_mega2560.dts b/src/arm/microchip/at91-cosino_mega2560.dts
new file mode 100644
index 0000000..04cb7be
--- /dev/null
+++ b/src/arm/microchip/at91-cosino_mega2560.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-cosino_mega2560.dts - Device Tree file for Cosino board with
+ *			      Mega 2560 extension
+ *
+ * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it>
+ *			HCE Engineering
+ *
+ * Derived from at91sam9g35ek.dts by:
+ * 	Copyright (C) 2012 Atmel,
+ *      2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+
+/dts-v1/;
+#include "at91-cosino.dtsi"
+
+/ {
+	model = "HCE Cosino Mega 2560";
+	compatible = "hce,cosino_mega2560", "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&adc0 {
+	atmel,adc-ts-wires = <4>;
+	atmel,adc-ts-pressure-threshold = <10000>;
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-0 = <
+		&pinctrl_mmc1_slot0_clk_cmd_dat0
+		&pinctrl_mmc1_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		non-removable;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&usart1 {
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */
+			   &pioD 19 GPIO_ACTIVE_LOW
+			   &pioD 20 GPIO_ACTIVE_LOW
+			  >;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/src/arm/microchip/at91-dvk_som60.dts b/src/arm/microchip/at91-dvk_som60.dts
new file mode 100644
index 0000000..ededd5b
--- /dev/null
+++ b/src/arm/microchip/at91-dvk_som60.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-dvk_som60.dts - Device Tree file for the DVK SOM60 board
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+/dts-v1/;
+#include "at91-som60.dtsi"
+#include "at91-dvk_su60_somc.dtsi"
+#include "at91-dvk_su60_somc_lcm.dtsi"
+
+/ {
+	model = "Laird DVK SOM60";
+	compatible = "laird,dvk-som60", "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = &dbgu;
+		tick-timer = &pit;
+	};
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&ssc0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&usart1 {
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&pit {
+	status = "okay";
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&macb0 {
+	status = "okay";
+};
+
+&macb1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
diff --git a/src/arm/microchip/at91-dvk_su60_somc.dtsi b/src/arm/microchip/at91-dvk_su60_somc.dtsi
new file mode 100644
index 0000000..3542ad8
--- /dev/null
+++ b/src/arm/microchip/at91-dvk_su60_somc.dtsi
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-dvk_su60_somc.dtsi - Device Tree file for the DVK SOM60 base board
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+
+/ {
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck2_as_audio_mck>;
+
+		atmel,model = "wm8904 @ DVK-SOM60";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+
+		status = "okay";
+	};
+};
+
+&mmc0 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+	slot@0 {
+		bus-width = <4>;
+		cd-gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
+		cd-inverted;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Macronix MX25R4035FM1IL0 */
+	flash@0 {
+		compatible = "mxicy,mx25u4035", "jedec,spi-nor";
+		spi-max-frequency = <33000000>;
+		reg = <0>;
+	};
+};
+
+&ssc0 {
+	atmel,clk-from-rk-pin;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	wm8904: wm8904@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		clocks = <&pmc PMC_TYPE_SYSTEM 10>;
+		clock-names = "mclk";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom@57 {
+		compatible = "giantec,gt24c32a", "atmel,24c32";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+};
+
+&usart1 {
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&pit {
+	status = "okay";
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&macb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ethernet-phy@7 {
+		reg = <7>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_geth_int>;
+		interrupt-parent = <&pioB>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		txen-skew-ps = <800>;
+		txc-skew-ps = <3000>;
+		rxdv-skew-ps = <400>;
+		rxc-skew-ps = <3000>;
+		rxd0-skew-ps = <400>;
+		rxd1-skew-ps = <400>;
+		rxd2-skew-ps = <400>;
+		rxd3-skew-ps = <400>;
+	};
+};
+
+&macb1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ethernet-phy@1 {
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eth_int>;
+		interrupt-parent = <&pioC>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
diff --git a/src/arm/microchip/at91-dvk_su60_somc_lcm.dtsi b/src/arm/microchip/at91-dvk_su60_somc_lcm.dtsi
new file mode 100644
index 0000000..bea920b
--- /dev/null
+++ b/src/arm/microchip/at91-dvk_su60_somc_lcm.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-dvk_su60_somc_lcm.dtsi - Device Tree file for the DVK SOM60 LCD board
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	panel: panel {
+		compatible = "winstar,wf70gtiagdng0", "innolux,at070tn92";
+		backlight = <&backlight>;
+		power-supply = <&vcc_lcd_reg>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	vcc_lcd_reg: fixedregulator_lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC LCM";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		status = "okay";
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_lcd_ctp_int: lcd_ctp_int {
+			 atmel,pins =
+				 <AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	ft5426@38 {
+		compatible = "focaltech,ft5426", "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_ctp_int>;
+
+		interrupt-parent = <&pioC>;
+		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&hlcdc {
+	status = "okay";
+
+	hlcdc-display-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+		port@0 {
+			hlcdc_panel_output: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_input>;
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/at91-foxg20.dts b/src/arm/microchip/at91-foxg20.dts
new file mode 100644
index 0000000..9dfd5de
--- /dev/null
+++ b/src/arm/microchip/at91-foxg20.dts
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-foxg20.dts - Device Tree file for Acme Systems FoxG20 board
+ *
+ * Based on DT files for at91sam9g20ek evaluation board (AT91SAM9G20 SoC)
+ *
+ * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com>
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+
+/ {
+	model = "Acme Systems FoxG20";
+	compatible = "acme,foxg20", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 6 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 =
+					<&pinctrl_usart0
+					 &pinctrl_usart0_rts
+					 &pinctrl_usart0_cts
+					>;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			usart2: serial@fffb8000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usart3: serial@fffd0000 {
+				status = "okay";
+			};
+
+			uart0: serial@fffd4000 {
+				status = "okay";
+			};
+
+			uart1: serial@fffd8000 {
+				status = "okay";
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				board {
+					pinctrl_pck0_as_mck: pck0_as_mck {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				mmc0_slot1 {
+					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* CD pin */
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE	/* TWD (SDA), open drain */
+							 AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>;	/* TWCK (SCL), open drain */
+					};
+				};
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	i2c-gpio-0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c0>;
+		i2c-gpio,delay-us = <5>;	/* ~85 kHz */
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* red LED marked "PC7" near mini USB (device) receptacle */
+		user_led {
+			label = "user_led";
+			gpios = <&pioC 7 GPIO_ACTIVE_HIGH>;	/* PC7 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button {
+			label = "Button";
+			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/src/arm/microchip/at91-gatwick.dts b/src/arm/microchip/at91-gatwick.dts
new file mode 100644
index 0000000..551300f
--- /dev/null
+++ b/src/arm/microchip/at91-gatwick.dts
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-gatwick.dts - Device Tree file for the Gatwick board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+/dts-v1/;
+#include "at91-wb50n.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Laird Workgroup Bridge 50N - Project Gatwick";
+	compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_SETUP>;
+			gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-ethernet {
+			label = "gatwick:yellow:ethernet";
+			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-wifi {
+			label = "gatwick:green:wifi";
+			gpios = <&pioA 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-ble {
+			label = "gatwick:blue:ble";
+			gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-lora {
+			label = "gatwick:orange:lora";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-blank {
+			label = "gatwick:green:blank";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-user {
+			label = "gatwick:yellow:user";
+			gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_key_gpio: key_gpio_0 {
+		  atmel,pins =
+			  <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pullup deglitch */
+	  };
+	};
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&macb1 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+/* FTDI USART */
+&usart0 {
+	status = "okay";
+};
+
+/* GPS USART */
+&usart1 {
+	pinctrl-0 = <&pinctrl_usart1>;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	spidev@0 {
+		compatible = "semtech,sx1301";
+		reg = <0>;
+		spi-max-frequency = <8000000>;
+	};
+};
+
+&usb1 {
+	status = "okay";
+	/delete-property/atmel,oc-gpio;
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/src/arm/microchip/at91-kizbox.dts b/src/arm/microchip/at91-kizbox.dts
new file mode 100644
index 0000000..307663b
--- /dev/null
+++ b/src/arm/microchip/at91-kizbox.dts
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board
+ *
+ * Copyright (C) 2012-2014 Boris BREZILLON <b.brezillon@overkiz.com>
+ *               2014-2015 Gaël PORTAY <g.portay@overkiz.com>
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Overkiz Kizbox";
+	compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "ubi.mtd=ubi";
+		stdout-path = &dbgu;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x2000000>;
+	};
+
+	clocks {
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			label = "PB_RST";
+			gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+
+		button-user {
+			label = "PB_USER";
+			gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x101>;
+			wakeup-source;
+		};
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+
+		led-1 {
+			label = "pwm:green:network";
+			pwms = <&tcb1_pwm1 0 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2 {
+			label = "pwm:red:network";
+			pwms = <&tcb1_pwm2 0 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-3 {
+			label = "pwm:green:user";
+			pwms = <&tcb1_pwm0 0 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-4 {
+			label = "pwm:red:user";
+			pwms = <&tcb1_pwm0 1 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>, <1>;
+	};
+
+	timer@2 {
+		compatible = "atmel,tcb-timer";
+		reg = <2>;
+	};
+};
+
+&tcb1 {
+	tcb1_pwm0: pwm@0 {
+		compatible = "atmel,tcb-pwm";
+		reg = <0>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tcb1_tioa0 &pinctrl_tcb1_tiob0>;
+	};
+
+	tcb1_pwm1: pwm@1 {
+		compatible = "atmel,tcb-pwm";
+		reg = <1>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tcb1_tioa1>;
+	};
+
+	tcb1_pwm2: pwm@2 {
+		compatible = "atmel,tcb-pwm";
+		reg = <2>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tcb1_tioa2>;
+	};
+};
+
+&ebi {
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+	pinctrl-names = "default";
+
+	nand@3 {
+		reg = <0x3 0x0 0x800000>;
+		rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "soft";
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "mii";
+	pinctrl-0 = <&pinctrl_macb_rmii
+		     &pinctrl_macb_rmii_mii_alt>;
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&watchdog {
+	timeout-sec = <15>;
+	atmel,max-heartbeat-sec = <16>;
+	atmel,min-heartbeat-sec = <0>;
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <1>;
+	status = "okay";
+};
+
+&i2c_gpio0 {
+	status = "okay";
+
+	rtc: pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
diff --git a/src/arm/microchip/at91-kizbox2-2.dts b/src/arm/microchip/at91-kizbox2-2.dts
new file mode 100644
index 0000000..cab8b35
--- /dev/null
+++ b/src/arm/microchip/at91-kizbox2-2.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox2-2.dts - Device Tree file for the Kizbox2 with
+ * two head board
+ *
+ * Copyright (C) 2015 Overkiz SAS
+ *
+ * Authors: Antoine Aubert <a.aubert@overkiz.com>
+ *	    Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizbox2-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox 2 with two heads";
+	compatible = "overkiz,kizbox2-2", "atmel,sama5d31",
+		     "atmel,sama5d3", "atmel,sama5";
+};
+
+&usart1 {
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
diff --git a/src/arm/microchip/at91-kizbox2-common.dtsi b/src/arm/microchip/at91-kizbox2-common.dtsi
new file mode 100644
index 0000000..e5e21df
--- /dev/null
+++ b/src/arm/microchip/at91-kizbox2-common.dtsi
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox2_common.dtsi - Device Tree Include file for
+ * Overkiz Kizbox 2 family SoC
+ *
+ * Copyright (C) 2014-2018 Overkiz SAS
+ *
+ * Authors: Antoine Aubert <a.aubert@overkiz.com>
+ *          Gaël Portay <g.portay@overkiz.com>
+ *          Kévin Raymond <k.raymond@overkiz.com>
+ */
+#include "sama5d31.dtsi"
+
+/ {
+	chosen {
+		bootargs = "ubi.mtd=ubi";
+		stdout-path = &dbgu;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-prog {
+			label = "PB_PROG";
+			gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
+			linux,code = <0x102>;
+			wakeup-source;
+		};
+
+		button-reset {
+			label = "PB_RST";
+			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+
+		button-user {
+			label = "PB_USER";
+			gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x101>;
+			wakeup-source;
+		};
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+
+		led-1 {
+			label = "pwm:blue:user";
+			pwms = <&pwm0 2 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "none";
+		};
+
+		led-2 {
+			label = "pwm:green:user";
+			pwms = <&pwm0 1 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-3 {
+			label = "pwm:red:user";
+			pwms = <&pwm0 0 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	pmic: act8865@5b {
+		compatible = "active-semi,act8865";
+		reg = <0x5b>;
+		status = "okay";
+
+		regulators {
+			vcc_1v8_reg: DCDC_REG1 {
+				regulator-name = "VCC_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc_1v2_reg: DCDC_REG2 {
+				regulator-name = "VCC_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_3v3_reg: DCDC_REG3 {
+				regulator-name = "VCC_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vddfuse_reg: LDO_REG1 {
+				regulator-name = "FUSE_2V5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+			};
+
+			vddana_reg: LDO_REG2 {
+				regulator-name = "VDDANA";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vled_reg: LDO_REG3 {
+				regulator-name = "VLED";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			v3v8_rf_reg: LDO_REG4 {
+				regulator-name = "V3V8_RF";
+				regulator-min-microvolt = <3800000>;
+				regulator-max-microvolt = <3800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&usart1 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&usart2 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_pwmh0_1
+		     &pinctrl_pwm0_pwmh1_1
+		     &pinctrl_pwm0_pwmh2_0>;
+	status = "okay";
+};
+
+&adc0 {
+	atmel,adc-vref = <3333>;
+	status = "okay";
+};
+
+&macb1 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+/* WMBUS (inverted with IO in the latest schematic) */
+&pinctrl_usart0 {
+	atmel,pins =
+		<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+		 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+		 AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
+
+/* RTS */
+&pinctrl_usart1 {
+	atmel,pins =
+		<AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE
+		 AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+		 AT91_PIOE 7 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
+
+/* IO (inverted with WMBUS in the latest schematic) */
+&pinctrl_usart2 {
+	atmel,pins =
+		<AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_NONE
+		 AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
+		 AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
diff --git a/src/arm/microchip/at91-kizbox3-hs.dts b/src/arm/microchip/at91-kizbox3-hs.dts
new file mode 100644
index 0000000..fec7269
--- /dev/null
+++ b/src/arm/microchip/at91-kizbox3-hs.dts
@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox3-hs.dts - Device Tree file for Overkiz KIZBOX3-HS board
+ *
+ * Copyright (C) 2018 Overkiz SAS
+ *
+ * Authors: Dorian Rocipon <d.rocipon@overkiz.com>
+ *          Kevin Carli <k.carli@overkiz.com>
+ *          Mickael Gardet <m.gardet@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizbox3_common.dtsi"
+
+/ {
+	model = "Overkiz KIZBOX3-HS";
+	compatible = "overkiz,kizbox3-hs", "atmel,sama5d2", "atmel,sama5";
+
+	led-controller-1 {
+		status = "okay";
+
+		led-1 {
+			status = "okay";
+		};
+
+		led-2 {
+			status = "okay";
+		};
+
+		led-3 {
+			status = "okay";
+		};
+
+		led-4 {
+			status = "okay";
+		};
+	};
+
+	led-controller-2  {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_red
+			     &pinctrl_led_white>;
+		status = "okay";
+
+		led-5 {
+			label = "pio:red:user";
+			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-6 {
+			label = "pio:white:user";
+			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default" , "default", "default",
+				"default", "default" ;
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+		pinctrl-1 = <&pinctrl_pio_rf &pinctrl_pio_wifi>;
+		pinctrl-2 = <&pinctrl_pio_io_boot
+			     &pinctrl_pio_io_reset
+			     &pinctrl_pio_io_test_radio>;
+		pinctrl-3 = <&pinctrl_pio_zbe_test_radio
+			     &pinctrl_pio_zbe_rst>;
+		pinctrl-4 = <&pinctrl_pio_input>;
+
+		switch-1 {
+			label = "SW1";
+			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x101>;
+			wakeup-source;
+		};
+
+		switch-2 {
+			label = "SW2";
+			gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>;
+			linux,code = <0x102>;
+			wakeup-source;
+		};
+
+		switch-3 {
+			label = "SW3";
+			gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+			wakeup-source;
+		};
+
+		switch-7 {
+			label = "SW7";
+			gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>;
+			linux,code = <0x107>;
+			wakeup-source;
+		};
+
+		switch-8 {
+			label = "SW8";
+			gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>;
+			linux,code = <0x108>;
+			wakeup-source;
+		};
+	};
+
+	gpios {
+		compatible = "gpio";
+		status = "okay";
+
+		rf_on {
+			label = "rf on";
+			gpio = <&pioA PIN_PC19 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		wifi_on {
+			label = "wifi on";
+			gpio = <&pioA PIN_PC20 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		zbe_test_radio {
+			label = "zbe test radio";
+			gpio = <&pioA PIN_PB21 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		zbe_rst {
+			label = "zbe rst";
+			gpio = <&pioA PIN_PB25 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		io_reset {
+			label = "io reset";
+			gpio = <&pioA PIN_PB30 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		io_test_radio {
+			label = "io test radio";
+			gpio = <&pioA PIN_PC9 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		io_boot_0 {
+			label = "io boot 0";
+			gpio = <&pioA PIN_PC11 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		io_boot_1 {
+			label = "io boot 1";
+			gpio = <&pioA PIN_PC17 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		verbose_bootloader {
+			label = "verbose bootloader";
+			gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
+			input;
+		};
+
+		 nail_bed_detection  {
+			label = "nail bed detection";
+			gpio = <&pioA PIN_PB12 GPIO_ACTIVE_HIGH>;
+			input;
+		};
+
+		 id_usba {
+			label = "id usba";
+			gpio = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>;
+			input;
+		};
+	};
+};
+
+&pioA {
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PA22__GPIO>,
+		<PIN_PA24__GPIO>,
+		<PIN_PA26__GPIO>,
+		<PIN_PA29__GPIO>,
+		<PIN_PA18__GPIO>;
+		bias-disable;
+		};
+
+	pinctrl_gpio {
+		pinctrl_pio_rf: gpio_rf {
+			pinmux = <PIN_PC19__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_wifi: gpio_wifi {
+			pinmux = <PIN_PC20__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_io_boot: gpio_io_boot {
+			pinmux =
+			<PIN_PC11__GPIO>,
+			<PIN_PC17__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_io_test_radio: gpio_io_test_radio {
+			pinmux = <PIN_PC9__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_zbe_test_radio: gpio_zbe_test_radio {
+			pinmux = <PIN_PB21__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_zbe_rst: gpio_zbe_rst {
+			pinmux = <PIN_PB25__GPIO>;
+			bias-disable;
+		};
+		/* stm32 reset must be open drain (internal pull up) */
+		pinctrl_pio_io_reset: gpio_io_reset {
+			pinmux = <PIN_PB30__GPIO>;
+			bias-disable;
+			drive-open-drain;
+			output-low;
+		};
+		pinctrl_pio_input: gpio_input {
+			pinmux =
+			<PIN_PB11__GPIO>,
+			<PIN_PB12__GPIO>,
+			<PIN_PC0__GPIO>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_leds {
+		pinctrl_led_red: led_red {
+			pinmux = <PIN_PB1__GPIO>;
+			bias-disable;
+		};
+		pinctrl_led_white: led_white {
+			pinmux = <PIN_PB8__GPIO>;
+			bias-disable;
+		};
+	};
+};
+
+&adc {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&flx0 {
+	status = "okay";
+
+	uart5: serial@200  {
+			status = "okay";
+	};
+};
+
+&flx3 {
+	status = "okay";
+	uart8: serial@200 {
+		status = "okay";
+	};
+};
+
+&flx4 {
+	status = "okay";
+
+	i2c6: i2c@600 {
+		status = "okay";
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/src/arm/microchip/at91-kizbox3_common.dtsi b/src/arm/microchip/at91-kizbox3_common.dtsi
new file mode 100644
index 0000000..4656646
--- /dev/null
+++ b/src/arm/microchip/at91-kizbox3_common.dtsi
@@ -0,0 +1,371 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox3.dts - Device Tree Include file for Overkiz Kizbox 3
+ * family SoC boards
+ *
+ * Copyright (C) 2018 Overkiz SAS
+ *
+ * Authors: Dorian Rocipon <d.rocipon@overkiz.com>
+ *          Kevin Carli <k.carli@overkiz.com>
+ *          Mickael Gardet <m.gardet@overkiz.com>
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Overkiz Kizbox3";
+	compatible = "overkiz,kizbox3", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart8;
+	};
+
+	chosen {
+		bootargs = "ubi.mtd=ubi";
+		stdout-path = "serial1:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	vdd_adc_vddana: supply_3v3_ana {
+		compatible = "regulator-fixed";
+		regulator-name = "adc-vddana";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_adc_vref: supply_3v3_ref {
+		compatible = "regulator-fixed";
+		regulator-name = "adc-vref";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	led-controller-1 {
+		compatible = "pwm-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwm0_pwm_h0
+			     &pinctrl_pwm0_pwm_h1
+			     &pinctrl_pwm0_pwm_h2
+			     &pinctrl_pwm0_pwm_h3>;
+		status = "disabled";
+
+		led-1 {
+			label = "pwm:red:user";
+			pwms = <&pwm0 0 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+			status = "disabled";
+		};
+
+		led-2 {
+			label = "pwm:green:user";
+			pwms = <&pwm0 1 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+			status = "disabled";
+		};
+
+		led-3 {
+			label = "pwm:blue:user";
+			pwms = <&pwm0 2 10000000 0>;
+			max-brightness = <255>;
+			status = "disabled";
+		};
+
+		led-4 {
+			label = "pwm:white:user";
+			pwms = <&pwm0 3 10000000 0>;
+			max-brightness = <255>;
+			status = "disabled";
+		};
+	};
+};
+
+&ebi {
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@3 {
+		pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+		pinctrl-names = "default";
+		reg = <0x3 0x0 0x800000>;
+
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			u-boot@20000 {
+				label = "u-boot";
+				reg = <0x20000 0x140000>;
+			};
+
+			u-boot-factory@160000 {
+				label = "u-boot-factory";
+				reg = <0x160000 0x140000>;
+			};
+
+			ubi@2A0000 {
+				label = "ubi";
+				reg = <0x2A0000 0x7D60000>;
+			};
+		};
+
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&pioA {
+	pinctrl_ebi_nand_addr: ebi-addr-1 {
+		pinmux = <PIN_PA0__D0>,
+			<PIN_PA1__D1>,
+			<PIN_PA2__D2>,
+			<PIN_PA3__D3>,
+			<PIN_PA4__D4>,
+			<PIN_PA5__D5>,
+			<PIN_PA6__D6>,
+			<PIN_PA7__D7>,
+			<PIN_PA8__NWE_NANDWE>,
+			<PIN_PA9__NCS3>,
+			<PIN_PA10__A21_NANDALE>,
+			<PIN_PA11__A22_NANDCLE>,
+			<PIN_PA21__NANDRDY>;
+		bias-disable;
+	};
+
+	pinctrl_usart {
+		pinctrl_usart_0: usart0-0 {
+			pinmux = < PIN_PB26__URXD0>, <PIN_PB27__UTXD0>;
+			bias-disable;
+		};
+		pinctrl_usart_1: usart1-0 {
+			pinmux = < PIN_PD2__URXD1>, <PIN_PD3__UTXD1>;
+			bias-disable;
+		};
+		pinctrl_usart_2: usart2-0 {
+			pinmux = < PIN_PD4__URXD2>, <PIN_PD5__UTXD2>;
+			bias-disable;
+		};
+		pinctrl_usart_3: usart3-0 {
+			pinmux = < PIN_PC12__URXD3>, <PIN_PC13__UTXD3>;
+			bias-disable;
+		};
+		pinctrl_usart_4: usart4-0 {
+			pinmux = < PIN_PB3__URXD4>, <PIN_PB4__UTXD4>;
+			bias-disable;
+		};
+		pinctrl_flx0_default: flx0_usart_default {
+			pinmux = <PIN_PB28__FLEXCOM0_IO0>, //TX
+			<PIN_PB29__FLEXCOM0_IO1>; //RX
+			bias-disable;
+		};
+		pinctrl_flx3_default: flx3_usart_default {
+			pinmux = <PIN_PB22__FLEXCOM3_IO1>, //RX
+			<PIN_PB23__FLEXCOM3_IO0>; //TX
+			bias-disable;
+		};
+	};
+
+	pinctrl_flx4_default: flx4_i2c6_default {
+		pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA
+		<PIN_PD13__FLEXCOM4_IO1>; //CLK
+		bias-disable;
+		drive-open-drain;
+	};
+
+	pinctrl_pwm0 {
+		pinctrl_pwm0_pwm_h0: pwm0_pwm_h0 {
+			pinmux = <PIN_PA30__PWMH0>;
+			bias-disable;
+		};
+		pinctrl_pwm0_pwm_h1: pwm0_pwmh1 {
+			pinmux = <PIN_PB0__PWMH1>;
+			bias-disable;
+		};
+		pinctrl_pwm0_pwm_h2: pwm0_pwm_h2 {
+			pinmux = <PIN_PB5__PWMH2>;
+			bias-disable;
+		};
+		pinctrl_pwm0_pwm_h3: pwm0_pwm_h3 {
+			pinmux = <PIN_PB7__PWMH3>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_adc {
+		pinctrl_adc2: adc2 {
+			pinmux = <PIN_PD21__GPIO>;
+			bias-disable;
+		};
+		pinctrl_adc3: adc3 {
+			pinmux = <PIN_PD22__GPIO>;
+			bias-disable;
+		};
+		pinctrl_adc4: adc4 {
+			pinmux = <PIN_PD23__GPIO>;
+			bias-disable;
+		};
+		pinctrl_adc5: adc5 {
+			pinmux = <PIN_PD24__GPIO>;
+			bias-disable;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart_0>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+/* debug uart */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart_1>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart_2>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart_3>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart_4>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "disabled";
+
+	uart5: serial@200  {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "disabled";
+	};
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "disabled";
+
+	uart8: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx3_default>;
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "disabled";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "disabled";
+
+	i2c6: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		status = "disabled";
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc2
+		     &pinctrl_adc3
+		     &pinctrl_adc4
+		     &pinctrl_adc5>;
+
+	vddana-supply = <&vdd_adc_vddana>;
+	vref-supply = <&vdd_adc_vref>;
+	status = "disabled";
+};
+
+&securam {
+	export;
+
+	/* export overkiz u-boot mode/version and factory */
+	uboot@1400 {
+		reg = <0x1400 0x20>;
+		export;
+	};
+};
diff --git a/src/arm/microchip/at91-kizboxmini-base.dts b/src/arm/microchip/at91-kizboxmini-base.dts
new file mode 100644
index 0000000..81c29ca
--- /dev/null
+++ b/src/arm/microchip/at91-kizboxmini-base.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-kizboxmini-base.dts - Device Tree file for Overkiz Kizbox mini
+ * base board
+ *
+ * Copyright (C) 2015 Overkiz SAS
+ *   Author: Antoine Aubert <a.aubert@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox Mini";
+	compatible = "overkiz,kizboxmini-base", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&pinctrl_usart0 {
+	atmel,pins =
+		<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+		 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+		 AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
diff --git a/src/arm/microchip/at91-kizboxmini-common.dtsi b/src/arm/microchip/at91-kizboxmini-common.dtsi
new file mode 100644
index 0000000..42640fe
--- /dev/null
+++ b/src/arm/microchip/at91-kizboxmini-common.dtsi
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
+ *
+ * Copyright (C) 2014-2018 Overkiz SAS
+ *   Author: Antoine Aubert <a.aubert@overkiz.com>
+ *           Gaël Portay <g.portay@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ *           Dorian Rocipon <d.rocipon@overkiz.com>
+ */
+#include "at91sam9g25.dtsi"
+
+/ {
+	chosen {
+		bootargs = "ubi.mtd=ubi";
+		stdout-path = &dbgu;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		adc_op_clk {
+			status = "disabled";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		key-prog {
+			label = "PB_PROG";
+			gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
+			linux,code = <0x102>;
+			wakeup-source;
+		};
+
+		key-reset {
+			label = "PB_RST";
+			gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+
+	leds: led-controller-1 {
+		compatible = "pwm-leds";
+
+		led_blue: led-1 {
+			label = "pwm:blue:user";
+			pwms = <&pwm0 2 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "none";
+			status = "disabled";
+		};
+
+		led_green: led-2 {
+			label = "pwm:green:user";
+			pwms = <&pwm0 0 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		led_red: led-3 {
+			label = "pwm:red:user";
+			pwms = <&pwm0 1 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_pwm0_1
+		     &pinctrl_pwm0_pwm1_1
+		     &pinctrl_pwm0_pwm2_1>;
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&adc0 {
+	status = "disabled";
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_addr_nand
+			&pinctrl_ebi_data_0_7>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_nand_oe_we
+		     &pinctrl_nand_cs
+		     &pinctrl_nand_rb>;
+	pinctrl-names = "default";
+
+	nand@3 {
+		reg = <0x3 0x0 0x800000>;
+		rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	num-ports = <1>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
diff --git a/src/arm/microchip/at91-kizboxmini-mb.dts b/src/arm/microchip/at91-kizboxmini-mb.dts
new file mode 100644
index 0000000..c07d307
--- /dev/null
+++ b/src/arm/microchip/at91-kizboxmini-mb.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015-2018 Overkiz SAS
+ *   Author: Mickael Gardet <m.gardet@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox Mini Mother Board";
+	compatible = "overkiz,kizboxmini-mb", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&usb0 {
+	num-ports = <2>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&led_blue {
+	status = "okay";
+};
diff --git a/src/arm/microchip/at91-kizboxmini-rd.dts b/src/arm/microchip/at91-kizboxmini-rd.dts
new file mode 100644
index 0000000..ab50f4d
--- /dev/null
+++ b/src/arm/microchip/at91-kizboxmini-rd.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015-2018 Overkiz SAS
+ *   Author: Mickael Gardet <m.gardet@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox Mini RailDIN";
+	compatible = "overkiz,kizboxmini-rd", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+
+	clocks {
+		adc_op_clk {
+			status = "okay";
+		};
+	};
+};
+
+&pinctrl {
+	adc0 {
+		pinctrl_adc0_ad5: adc0_ad5-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&usart0 {
+	status = "disabled";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&led_blue {
+	status = "okay";
+};
+
+&adc0 {
+	atmel,adc-vref = <2500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_ad5>;
+	atmel,adc-channels-used = <0x0020>;
+	status = "okay";
+};
diff --git a/src/arm/microchip/at91-linea.dtsi b/src/arm/microchip/at91-linea.dtsi
new file mode 100644
index 0000000..533a440
--- /dev/null
+++ b/src/arm/microchip/at91-linea.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-linea.dtsi - Device Tree Include file for the Axentia Linea Module.
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ */
+
+#include "sama5d31.dtsi"
+
+/ {
+	compatible = "axentia,linea",
+		     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+
+&nand_controller {
+	status = "okay";
+
+	nand: nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+	};
+};
diff --git a/src/arm/microchip/at91-lmu5000.dts b/src/arm/microchip/at91-lmu5000.dts
new file mode 100644
index 0000000..f8863d7
--- /dev/null
+++ b/src/arm/microchip/at91-lmu5000.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree file for CalAmp LMU5000 board
+ *
+ * Copyright (C) 2013 Adam Porter <porter.adam@gmail.com>
+ */
+
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+
+/ {
+	model = "CalAmp LMU5000";
+	compatible = "calamp,lmu5000", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 rootfstype=jffs2";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <18432000>;
+		};
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	status = "okay";
+
+	nand_controller: nand-controller {
+		pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+			status = "okay";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				kernel@0 {
+					label = "kernel";
+					reg = <0x0 0x400000>;
+				};
+
+				rootfs@400000 {
+					label = "rootfs";
+					reg = <0x400000 0x3C00000>;
+				};
+
+				user1@4000000 {
+					label = "user1";
+					reg = <0x4000000 0x2000000>;
+				};
+
+				user2@6000000 {
+					label = "user2";
+					reg = <0x6000000 0x2000000>;
+				};
+			};
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&pinctrl {
+	board {
+		pinctrl_pck0_as_mck: pck0_as_mck {
+			atmel,pins = <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	usb0 {
+		pinctrl_usb1_vbus_gpio: usb0_vbus_gpio {
+			atmel,pins = <AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&ssc0 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_ssc0_tx>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usart0 {
+	pinctrl-0 =
+		<&pinctrl_usart0
+		 &pinctrl_usart0_rts
+		 &pinctrl_usart0_cts
+		 &pinctrl_usart0_dtr_dsr
+		 &pinctrl_usart0_dcd
+		 &pinctrl_usart0_ri>;
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <2>;
+	status = "okay";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
+	atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/src/arm/microchip/at91-natte.dtsi b/src/arm/microchip/at91-natte.dtsi
new file mode 100644
index 0000000..49f0a0c
--- /dev/null
+++ b/src/arm/microchip/at91-natte.dtsi
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * at91-natte.dts - Device Tree include file for the Natte board
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ */
+
+/ {
+	mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&ioexp 0 GPIO_ACTIVE_HIGH>,
+			    <&ioexp 1 GPIO_ACTIVE_HIGH>,
+			    <&ioexp 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	batntc-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 5>;
+		io-channel-names = "parent";
+		mux-controls = <&mux>;
+
+		channels =
+			"batntc0", "batntc1", "batntc2", "batntc3",
+			"batntc4", "batntc5", "batntc6", "batntc7";
+	};
+
+	batv-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 6>;
+		io-channel-names = "parent";
+		mux-controls = <&mux>;
+
+		channels =
+			"batv0", "batv1", "batv2", "batv3",
+			"batv4", "batv5", "batv6", "batv7";
+	};
+
+	iout-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 7>;
+		io-channel-names = "parent";
+		mux-controls = <&mux>;
+
+		channels =
+			"iout0", "iout1", "iout2", "iout3",
+			"iout4", "iout5", "iout6", "iout7";
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux";
+		mux-locked;
+		i2c-parent = <&i2c0>;
+		mux-controls = <&mux>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	ioexp: ioexp@20 {
+		#gpio-cells = <2>;
+		compatible = "semtech,sx1502q";
+		reg = <0x20>;
+
+		gpio-controller;
+		ngpios = <8>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio3_cfg_pins>;
+
+		gpio3_cfg_pins: gpio3_cfg {
+			pins = "gpio3";
+			bias-pull-up;
+		};
+	};
+
+	adc: adc@48 {
+		compatible = "ti,ads1015";
+		reg = <0x48>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@4 {
+			reg = <4>;
+			ti,gain = <2>;
+			ti,datarate = <4>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			ti,gain = <2>;
+			ti,datarate = <4>;
+		};
+
+		channel@6 {
+			reg = <6>;
+			ti,gain = <1>;
+			ti,datarate = <4>;
+		};
+
+		channel@7 {
+			reg = <7>;
+			ti,gain = <3>;
+			ti,datarate = <4>;
+		};
+	};
+};
diff --git a/src/arm/microchip/at91-nattis-2-natte-2.dts b/src/arm/microchip/at91-nattis-2-natte-2.dts
new file mode 100644
index 0000000..f71377c
--- /dev/null
+++ b/src/arm/microchip/at91-nattis-2-natte-2.dts
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * at91-nattis-2-natte-2.dts - Device Tree file for the Linea/Nattis board
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ */
+/dts-v1/;
+#include "at91-linea.dtsi"
+#include "at91-natte.dtsi"
+
+/ {
+	model = "Axentia Linea-Nattis v2 Natte v2";
+	compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea",
+		     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-wakeup {
+			label = "Wakeup";
+			linux,code = <10>;
+			wakeup-source;
+			gpios = <&pioB 27 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	panel_reg: panel-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-VCC";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	bl_reg: backlight-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-VDD";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	panel_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 100000 0>;
+
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <40>;
+
+		power-supply = <&bl_reg>;
+		enable-gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_blon>;
+	};
+
+	panel: panel {
+		compatible = "sharp,lq150x1lg11", "panel-lvds";
+
+		backlight = <&panel_bl>;
+		power-supply = <&panel_reg>;
+
+		width-mm = <304>;
+		height-mm = <228>;
+
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			// 1024x768 @ 60Hz (typical)
+			clock-frequency = <50000000 65000000 80000000>;
+			hactive = <1024>;
+			vactive = <768>;
+			hfront-porch = <48 88 88>;
+			hback-porch = <96 168 168>;
+			hsync-len = <32 64 64>;
+			vsync-len = <3 13 74>;
+			vfront-porch = <3 13 74>;
+			vback-porch = <3 12 74>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lvds_encoder_output>;
+			};
+		};
+	};
+
+	lvds-encoder {
+		compatible = "ti,ds90c185", "lvds-encoder";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds_prlud0 &pinctrl_lvds_hipow0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+					remote-endpoint = <&hlcdc_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "nattis-tfa9879";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&cpu_dai>;
+		simple-audio-card,frame-master = <&cpu_dai>;
+		simple-audio-card,widgets = "Line", "Line Out Jack";
+		simple-audio-card,routing = "Line Out Jack", "LINEOUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&ssc0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&amp>;
+		};
+	};
+};
+
+&pinctrl {
+	nattis {
+		pinctrl_usba_vbus: usba_vbus {
+			atmel,pins = <AT91_PIOD 28 AT91_PERIPH_GPIO
+				      AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_mmc0_cd: mmc0_cd {
+			atmel,pins = <AT91_PIOD  5 AT91_PERIPH_GPIO
+				      AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		pinctrl_lvds_prlud0: lvds_prlud0 {
+			atmel,pins = <AT91_PIOA 21 AT91_PERIPH_GPIO
+				      (AT91_PINCTRL_OUTPUT |
+				       AT91_PINCTRL_OUTPUT_VAL(0))>;
+		};
+
+		pinctrl_lvds_hipow0: lvds_hipow0 {
+			atmel,pins = <AT91_PIOA 23 AT91_PERIPH_GPIO
+				      (AT91_PINCTRL_OUTPUT |
+				       AT91_PINCTRL_OUTPUT_VAL(0))>;
+		};
+
+		pinctrl_blon: blon {
+			atmel,pins = <AT91_PIOA 20 AT91_PERIPH_GPIO
+				      (AT91_PINCTRL_OUTPUT |
+				       AT91_PINCTRL_OUTPUT_VAL(0))>;
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <100000>;
+
+	temp@18 {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x18>;
+		smbus-timeout-disable;
+	};
+
+	eeprom@50 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	amp: amplifier@6c {
+		 compatible = "nxp,tfa9879";
+		 reg = <0x6c>;
+		 #sound-dai-cells = <0>;
+	};
+};
+
+&ssc0 {
+	status = "okay";
+
+	atmel,clk-from-rk-pin;
+	#sound-dai-cells = <0>;
+};
+
+&hlcdc {
+	status = "okay";
+
+	hlcdc-display-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
+
+		port@0 {
+			hlcdc_output: endpoint {
+				remote-endpoint = <&lvds_encoder_input>;
+				bus-width = <16>;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0
+		     &pinctrl_mmc0_dat1_3
+		     &pinctrl_mmc0_cd>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		cd-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+		cd-inverted;
+	};
+};
+
+&usart0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart0>;
+	atmel,use-dma-rx;
+};
+
+&nand {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		at91bootstrap@0 {
+			label = "at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		barebox@40000 {
+			label = "barebox";
+			reg = <0x40000 0x60000>;
+		};
+
+		bareboxenv@c0000 {
+			label = "bareboxenv";
+			reg = <0xc0000 0x40000>;
+		};
+
+		bareboxenv2@100000 {
+			label = "bareboxenv2";
+			reg = <0x100000 0x40000>;
+		};
+
+		oftree@180000 {
+			label = "oftree";
+			reg = <0x180000 0x20000>;
+		};
+
+		kernel@200000 {
+			label = "kernel";
+			reg = <0x200000 0x500000>;
+		};
+
+		rootfs@800000 {
+			label = "rootfs";
+			reg = <0x800000 0x1f800000>;
+		};
+	};
+};
+
+&dbgu {
+	status = "okay";
+
+	atmel,use-dma-rx;
+};
+
+&usb0 {
+	status = "okay";
+
+	atmel,vbus-gpio = <&pioD 28 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+};
diff --git a/src/arm/microchip/at91-q5xr5.dts b/src/arm/microchip/at91-q5xr5.dts
new file mode 100644
index 0000000..9cf60b6
--- /dev/null
+++ b/src/arm/microchip/at91-q5xr5.dts
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree file for Exegin Q5xR5 board
+ *
+ * Copyright (C) 2014 Owen Kirby <osk@exegin.com>
+ */
+
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+
+/ {
+	model = "Exegin Q5x (rev5)";
+	compatible = "exegin,q5xr5", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 rootfstype=squashfs,jffs2";
+	};
+
+	memory {
+		reg = <0x20000000 0x0>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <18432000>;
+		};
+
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "cfi-flash";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x1000000 0x800000>;
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			kernel@0 {
+				label = "kernel";
+				reg = <0x0 0x200000>;
+			};
+
+			rootfs@200000 {
+				label = "rootfs";
+				reg = <0x200000 0x600000>;
+			};
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&pinctrl {
+	board {
+		pinctrl_pck0_as_mck: pck0_as_mck {
+			atmel,pins = <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	spi0 {
+		pinctrl_spi0: spi0-0 {
+			atmel,pins =
+				<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi0_npcs0: spi0_npcs0 {
+			atmel,pins = <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi0_npcs1: spi0_npcs1 {
+			atmel,pins = <AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	spi1 {
+		pinctrl_spi1: spi1-0 {
+			atmel,pins =
+				<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi1_npcs0: spi1_npcs0 {
+			atmel,pins = <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi1_npcs1: spi1_npcs1 {
+			atmel,pins = <AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0 &pinctrl_spi0_npcs0 &pinctrl_spi0_npcs1>;
+	cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>, <&pioC 11 GPIO_ACTIVE_LOW>, <0>, <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		at91boot@0 {
+			label = "at91boot";
+			reg = <0x0 0x4000>;
+		};
+
+		uenv@4000 {
+			label = "uboot-env";
+			reg = <0x4000 0x4000>;
+		};
+
+		uboot@8000 {
+			label = "uboot";
+			reg = <0x8000 0x3E000>;
+		};
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1 &pinctrl_spi1_npcs0 &pinctrl_spi1_npcs1>;
+	cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>, <&pioC 5 GPIO_ACTIVE_LOW>, <0>, <0>;
+	status = "okay";
+};
+
+&usart0 {
+	pinctrl-0 =
+		<&pinctrl_usart0
+		 &pinctrl_usart0_rts
+		 &pinctrl_usart0_cts
+		 &pinctrl_usart0_dtr_dsr
+		 &pinctrl_usart0_dcd
+		 &pinctrl_usart0_ri>;
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <2>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/src/arm/microchip/at91-qil_a9260.dts b/src/arm/microchip/at91-qil_a9260.dts
new file mode 100644
index 0000000..5ccb3c1
--- /dev/null
+++ b/src/arm/microchip/at91-qil_a9260.dts
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91-qil_a9260.dts - Device Tree file for Calao QIL A9260 board
+ *
+ * Copyright (C) 2011-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+/ {
+	model = "Calao QIL A9260";
+	compatible = "calao,qil-a9260", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot0_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 =
+					<&pinctrl_usart0
+					 &pinctrl_usart0_rts
+					 &pinctrl_usart0_cts
+					 &pinctrl_usart0_dtr_dsr
+					 &pinctrl_usart0_dcd
+					 &pinctrl_usart0_ri>;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				pinctrl-0 =
+					<&pinctrl_usart1
+					 &pinctrl_usart1_rts
+					 &pinctrl_usart1_cts>;
+				status = "okay";
+			};
+
+			usart2: serial@fffb8000 {
+				pinctrl-0 =
+					<&pinctrl_usart2
+					 &pinctrl_usart2_rts
+					 &pinctrl_usart2_cts>;
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			spi0: spi@fffc8000 {
+				status = "okay";
+				cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>;
+
+				m41t94@0 {
+					compatible = "st,m41t94";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			shdwc: poweroff@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@a0000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@c0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4c0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7cc0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led {
+			label = "user_led";
+			gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-user {
+			label = "user_pb";
+			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
+			linux,code = <28>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+};
diff --git a/src/arm/microchip/at91-sam9_l9260.dts b/src/arm/microchip/at91-sam9_l9260.dts
new file mode 100644
index 0000000..2fb51b9
--- /dev/null
+++ b/src/arm/microchip/at91-sam9_l9260.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-sam9_l9260.dts - Device Tree file for Olimex SAM9-L9260 board
+ *
+ *  Copyright (C) 2016 Raashid Muhammed <raashidmuhammed@zilogic.com>
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Olimex sam9-l9260";
+	compatible = "olimex,sam9-l9260", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 8 GPIO_ACTIVE_HIGH>;
+					wp-gpios = <&pioC 4 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			macb0: ethernet@fffc4000 {
+				pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii_alt>;
+				phy-mode = "mii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <&pioC 11 0>, <0>, <0>, <0>;
+				status = "okay";
+
+				flash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <15000000>;
+					reg = <0>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH	/* CD pin */
+							 AT91_PIOC 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* WP pin */
+					};
+				};
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+		};
+
+		usb0: ohci@500000 {
+			status = "okay";
+		};
+
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "sam9-l9260:yellow:pwr";
+			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+		};
+
+		status_led {
+			label = "sam9-l9260:green:status";
+			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+};
diff --git a/src/arm/microchip/at91-sam9x60_curiosity.dts b/src/arm/microchip/at91-sam9x60_curiosity.dts
new file mode 100644
index 0000000..83372c1
--- /dev/null
+++ b/src/arm/microchip/at91-sam9x60_curiosity.dts
@@ -0,0 +1,507 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x60_curiosity.dts - Device Tree file for Microchip SAM9X60 Curiosity board
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Durai Manickam KR <durai.manickamkr@microchip.com>
+ */
+/dts-v1/;
+#include "sam9x60.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Microchip SAM9X60 Curiosity";
+	compatible = "microchip,sam9x60-curiosity", "microchip,sam9x60", "atmel,at91sam9";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c6;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-user {
+			label = "PB_USER";
+			gpios = <&pioA 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-red {
+			label = "red";
+			gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioD 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+
+	vdd_1v8: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "VDD_1V8";
+	};
+
+	vdd_1v15: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <1150000>;
+		regulator-min-microvolt = <1150000>;
+		regulator-name = "VDD_1V15";
+	};
+
+	vdd1_3v3: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD1_3V3";
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd1_3v3>;
+	vref-supply = <&vdd1_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_rx_tx>;
+	status = "disabled"; /* Conflict with dbgu. */
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_rx_tx>;
+	status = "okay";
+};
+
+&dbgu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dbgu>;
+	status = "okay"; /* Conflict with can0. */
+};
+
+&ebi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_lsb>;
+	status = "okay";
+
+	nand_controller: nand-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>;
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <8>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				uboot@40000 {
+					label = "u-boot";
+					reg = <0x40000 0xc0000>;
+				};
+
+				ubootenvred@100000 {
+					label = "U-Boot Env Redundant";
+					reg = <0x100000 0x40000>;
+				};
+
+				ubootenv@140000 {
+					label = "U-Boot Env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x1f800000>;
+				};
+			};
+		};
+	};
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c0: i2c@600 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+			pagesize = <16>;
+		};
+	};
+};
+
+&flx6 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c6: i2c@600 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx6_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "disabled";
+	};
+};
+
+&flx7 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart7: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx7_default>;
+		status = "okay";
+	};
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_rmii>;
+	status = "okay";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+	};
+};
+
+&pinctrl {
+	adc {
+		pinctrl_adc_default: adc-default {
+			atmel,pins = <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_adtrg_default: adtrg-default {
+			atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	can0 {
+		pinctrl_can0_rx_tx: can0-rx-tx {
+			atmel,pins =
+				<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX0 */
+				 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX0 */
+				 AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	can1 {
+		pinctrl_can1_rx_tx: can1-rx-tx {
+			atmel,pins =
+				<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX1 */
+				 AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX1 */
+				 AT91_PIOB 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	dbgu {
+		pinctrl_dbgu: dbgu-0 {
+			atmel,pins = <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				      AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+	};
+
+	ebi {
+		pinctrl_ebi_data_lsb: ebi-data-lsb {
+			atmel,pins =
+				<AT91_PIOD 6 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 7 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 8 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 9 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 10 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 11 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 12 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 13 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_ebi_addr_nand: ebi-addr-nand {
+			atmel,pins =
+				<AT91_PIOD 2 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 3 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+	};
+
+	flexcom {
+		pinctrl_flx0_default: flx0-twi {
+			atmel,pins =
+				<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_flx6_default: flx6-twi {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_flx7_default: flx7-usart {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE
+				 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+		};
+	};
+
+	gpio-keys {
+		pinctrl_key_gpio_default: pinctrl-key-gpio {
+			atmel,pins = <AT91_PIOA 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	leds {
+		pinctrl_gpio_leds: gpio-leds {
+			atmel,pins = <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	macb0 {
+		pinctrl_macb0_rmii: macb0-rmii-0 {
+			atmel,pins =
+				<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+				 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+				 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
+				 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+				 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
+				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
+		};
+	};
+
+	nand {
+		pinctrl_nand_oe_we: nand-oe-we-0 {
+			atmel,pins =
+				<AT91_PIOD 0 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 1 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_nand_rb: nand-rb-0 {
+			atmel,pins =
+				<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_nand_cs: nand-cs-0 {
+			atmel,pins =
+				<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	pwm0 {
+		pinctrl_pwm0_0: pwm0-0 {
+			atmel,pins = <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_1: pwm0-1 {
+			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_2: pwm0-2 {
+			atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc0 {
+		pinctrl_sdmmc0_default: sdmmc0 {
+			atmel,pins =
+				<AT91_PIOA 17 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA17 CK  periph A with pullup */
+				 AT91_PIOA 16 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA16 CMD periph A with pullup */
+				 AT91_PIOA 15 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA15 DAT0 periph A */
+				 AT91_PIOA 18 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA18 DAT1 periph A with pullup */
+				 AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA19 DAT2 periph A with pullup */
+				 AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA20 DAT3 periph A with pullup */
+		};
+
+		pinctrl_sdmmc0_cd: sdmmc0-cd {
+			atmel,pins =
+				<AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc1 {
+		pinctrl_sdmmc1_default: sdmmc1 {
+			atmel,pins =
+				<AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA13 CK periph B */
+				 AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA12 CMD periph B with pullup */
+				 AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA11 DAT0 periph B with pullup */
+				 AT91_PIOA 2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA2 DAT1 periph B with pullup */
+				 AT91_PIOA 3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA3 DAT2 periph B with pullup */
+				 AT91_PIOA 4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA4 DAT3 periph B with pullup */
+		};
+	};
+
+	usb0 {
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins = <AT91_PIOA 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	usb1 {
+		pinctrl_usb_default: usb-default {
+			atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+}; /* pinctrl */
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_0 &pinctrl_pwm0_1 &pinctrl_pwm0_2>;
+	status = "okay";
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>;
+	cd-gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	disable-wp;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioA 27 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioD 18 GPIO_ACTIVE_HIGH
+			   &pioD 15 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/src/arm/microchip/at91-sam9x60ek.dts b/src/arm/microchip/at91-sam9x60ek.dts
new file mode 100644
index 0000000..5cd5930
--- /dev/null
+++ b/src/arm/microchip/at91-sam9x60ek.dts
@@ -0,0 +1,669 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x60ek.dts - Device Tree file for Microchip SAM9X60-EK board
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com>
+ */
+/dts-v1/;
+#include "sam9x60.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Microchip SAM9X60-EK";
+	compatible = "microchip,sam9x60ek", "microchip,sam9x60", "atmel,at91sam9";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c6;
+		serial1 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-1 {
+			label = "SW1";
+			gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+		status = "okay"; /* Conflict with pwm0. */
+
+		red {
+			label = "red";
+			gpios = <&pioB 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "green";
+			gpios = <&pioB 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue {
+			label = "blue";
+			gpios = <&pioB 13 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vdd_1v8: fixed-regulator-vdd_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_1v15: fixed-regulator-vdd_1v15 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-always-on;
+	};
+
+	vdd1_3v3: fixed-regulator-vdd1_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD1_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd2_3v3: regulator-fixed-vdd2_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD2_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd1_3v3>;
+	vref-supply = <&vdd1_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_rx_tx>;
+	status = "disabled"; /* Conflict with dbgu. */
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_rx_tx>;
+	status = "okay";
+};
+
+&classd {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_classd_default>;
+	atmel,pwm-type = "diff";
+	atmel,non-overlap-time = <10>;
+	status = "okay";
+};
+
+&dbgu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dbgu>;
+	status = "okay"; /* Conflict with can0. */
+};
+
+&ebi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_0_7>;
+	status = "okay";
+
+	nand_controller: nand-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>;
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <8>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				uboot@40000 {
+					label = "u-boot";
+					reg = <0x40000 0xc0000>;
+				};
+
+				ubootenvred@100000 {
+					label = "U-Boot Env Redundant";
+					reg = <0x100000 0x40000>;
+				};
+
+				ubootenv@140000 {
+					label = "U-Boot Env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x1f800000>;
+				};
+			};
+		};
+	};
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c0: i2c@600 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+			pagesize = <16>;
+			status = "okay";
+		};
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "disabled";
+
+	spi4: spi@400 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		status = "disabled";
+	};
+};
+
+&flx5 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart5: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx5_default>;
+		status = "okay";
+	};
+};
+
+&flx6 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c6: i2c@600 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx6_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		gpio_exp: mcp23008@20 {
+			compatible = "microchip,mcp23008";
+			reg = <0x20>;
+		};
+	};
+};
+
+&gpbr {
+	status = "okay";
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2s_default>;
+	#sound-dai-cells = <0>;
+	status = "disabled"; /* Conflict with QSPI. */
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_rmii>;
+	status = "okay";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+	};
+};
+
+&pinctrl {
+	adc {
+		pinctrl_adc_default: adc_default {
+			atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_adtrg_default: adtrg_default {
+			atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	dbgu {
+		pinctrl_dbgu: dbgu-0 {
+			atmel,pins = <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				      AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+	};
+
+	i2s {
+		pinctrl_i2s_default: i2s {
+			atmel,pins =
+				<AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SCK */
+				 AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SWS */
+				 AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SDIN */
+				 AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SDOUT */
+				 AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* I2SMCK */
+		};
+	};
+
+	qspi {
+		pinctrl_qspi: qspi {
+			atmel,pins =
+				<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_SLEWRATE_DIS
+				 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_SLEWRATE_DIS
+				 AT91_PIOB 21 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOB 22 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOB 23 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOB 24 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+	};
+
+	nand {
+		pinctrl_nand_oe_we: nand-oe-we-0 {
+			atmel,pins =
+				<AT91_PIOD 0 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 1 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_nand_rb: nand-rb-0 {
+			atmel,pins =
+				<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_nand_cs: nand-cs-0 {
+			atmel,pins =
+				<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	ebi {
+		pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
+			atmel,pins =
+				<AT91_PIOD 6 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 7 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 8 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 9 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 10 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 11 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 12 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 13 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_ebi_data_0_15: ebi-data-msb-0 {
+			atmel,pins =
+				<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_ebi_addr_nand: ebi-addr-0 {
+			atmel,pins =
+				<AT91_PIOD 2 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 3 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+	};
+
+	flexcom {
+		pinctrl_flx0_default: flx0_twi {
+			atmel,pins =
+				<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_flx4_default: flx4_spi {
+			atmel,pins =
+				<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_flx5_default: flx5_uart {
+			atmel,pins =
+				<AT91_PIOA 7 AT91_PERIPH_C AT91_PINCTRL_NONE
+				 AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE
+				 AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE
+				 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_flx6_default: flx6_twi {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	classd {
+		pinctrl_classd_default: classd {
+			atmel,pins =
+				<AT91_PIOA 24 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 25 AT91_PERIPH_C AT91_PINCTRL_PULL_DOWN
+				 AT91_PIOA 26 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 27 AT91_PERIPH_C AT91_PINCTRL_PULL_DOWN>;
+		};
+	};
+
+	can0 {
+		pinctrl_can0_rx_tx: can0_rx_tx {
+			atmel,pins =
+				<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX0 */
+				 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX0 */
+				 AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN	/* Enable CAN0 mux */
+				 AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	can1 {
+		pinctrl_can1_rx_tx: can1_rx_tx {
+			atmel,pins =
+				<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX1 RXD1 */
+				 AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX1 TXD1 */
+				 AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN	/* Enable CAN1 mux */
+				 AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	macb0 {
+		pinctrl_macb0_rmii: macb0_rmii-0 {
+			atmel,pins =
+				<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+				 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+				 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
+				 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+				 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
+				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
+		};
+	};
+
+	pwm0 {
+		pinctrl_pwm0_0: pwm0_0 {
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_1: pwm0_1 {
+			atmel,pins = <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_2: pwm0_2 {
+			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_3: pwm0_3 {
+			atmel,pins = <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc0 {
+		pinctrl_sdmmc0_default: sdmmc0 {
+			atmel,pins =
+				<AT91_PIOA 17 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA17 CK  periph A with pullup */
+				 AT91_PIOA 16 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA16 CMD periph A with pullup */
+				 AT91_PIOA 15 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA15 DAT0 periph A */
+				 AT91_PIOA 18 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA18 DAT1 periph A with pullup */
+				 AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA19 DAT2 periph A with pullup */
+				 AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA20 DAT3 periph A with pullup */
+		};
+		pinctrl_sdmmc0_cd: sdmmc0_cd {
+			atmel,pins =
+				<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc1 {
+		pinctrl_sdmmc1_default: sdmmc1 {
+			atmel,pins =
+				<AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA13 CK periph B */
+				 AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA12 CMD periph B with pullup */
+				 AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA11 DAT0 periph B with pullup */
+				 AT91_PIOA  2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA2 DAT1 periph B with pullup */
+				 AT91_PIOA  3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA3 DAT2 periph B with pullup */
+				 AT91_PIOA  4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA4 DAT3 periph B with pullup */
+		};
+	};
+
+	gpio_keys {
+		pinctrl_key_gpio_default: pinctrl_key_gpio {
+			atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	usb0 {
+		pinctrl_usba_vbus: usba_vbus {
+			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	usb1 {
+		pinctrl_usb_default: usb_default {
+			atmel,pins = <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	leds {
+		pinctrl_gpio_leds: gpio_leds {
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOB 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+}; /* pinctrl */
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_0 &pinctrl_pwm0_1 &pinctrl_pwm0_2 &pinctrl_pwm0_3>;
+	status = "disabled"; /* Conflict with leds. */
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>;
+	status = "okay";
+	cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+	disable-wp;
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	no-1-8-v;
+	non-removable;
+	status = "disabled"; /* Conflict with flx4. */
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay"; /* Conflict with i2s. */
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		spi-cs-setup-ns = <7>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+
+		at91bootstrap@0 {
+			label = "qspi: at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "qspi: bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "qspi: bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "qspi: bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "qspi: device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "qspi: kernel";
+			reg = <0x200000 0x600000>;
+		};
+	};
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioD 15 GPIO_ACTIVE_HIGH
+			   &pioD 16 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
diff --git a/src/arm/microchip/at91-sama5d27_som1.dtsi b/src/arm/microchip/at91-sama5d27_som1.dtsi
new file mode 100644
index 0000000..95ecb7d
--- /dev/null
+++ b/src/arm/microchip/at91-sama5d27_som1.dtsi
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SoM1 board
+ *
+ *  Copyright (c) 2017, Microchip Technology Inc.
+ *                2017 Cristian Birsan <cristian.birsan@microchip.com>
+ *                2017 Claudiu Beznea <claudiu.beznea@microchip.com>
+ */
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Atmel SAMA5D27 SoM1";
+	compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		i2c0 = &i2c0;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	ahb {
+		sdmmc0: sdio-host@a0000000 {
+			microchip,sdcal-inverted;
+		};
+
+		apb {
+			qspi1: spi@f0024000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_qspi1_default>;
+
+				flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "jedec,spi-nor";
+					reg = <0>;
+					spi-max-frequency = <104000000>;
+					spi-cs-setup-ns = <7>;
+					spi-tx-bus-width = <4>;
+					spi-rx-bus-width = <4>;
+					m25p,fast-read;
+
+					at91bootstrap@0 {
+						label = "at91bootstrap";
+						reg = <0x00000000 0x00040000>;
+					};
+
+					bootloader@40000 {
+						label = "bootloader";
+						reg = <0x00040000 0x000c0000>;
+					};
+
+					bootloaderenvred@100000 {
+						label = "bootloader env redundant";
+						reg = <0x00100000 0x00040000>;
+					};
+
+					bootloaderenv@140000 {
+						label = "bootloader env";
+						reg = <0x00140000 0x00040000>;
+					};
+
+					dtb@180000 {
+						label = "device tree";
+						reg = <0x00180000 0x00080000>;
+					};
+
+					kernel@200000 {
+						label = "kernel";
+						reg = <0x00200000 0x00600000>;
+					};
+				};
+			};
+
+			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_default>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy-mode = "rmii";
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+					interrupt-parent = <&pioA>;
+					interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+				};
+			};
+
+			i2c0: i2c@f8028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c0_default>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "okay";
+
+				at24@50 {
+					compatible = "atmel,24c02";
+					reg = <0x50>;
+					pagesize = <8>;
+				};
+			};
+
+			pinctrl@fc038000 {
+				pinctrl_i2c0_default: i2c0_default {
+					pinmux = <PIN_PD21__TWD0>,
+						 <PIN_PD22__TWCK0>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_gpio: i2c0_gpio {
+					pinmux = <PIN_PD21__GPIO>,
+						 <PIN_PD22__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_qspi1_default: qspi1_default {
+					sck_cs {
+						pinmux = <PIN_PB5__QSPI1_SCK>,
+							 <PIN_PB6__QSPI1_CS>;
+						bias-disable;
+					};
+
+					data {
+						pinmux = <PIN_PB7__QSPI1_IO0>,
+							 <PIN_PB8__QSPI1_IO1>,
+							 <PIN_PB9__QSPI1_IO2>,
+							 <PIN_PB10__QSPI1_IO3>;
+						bias-pull-up;
+					};
+				};
+
+				pinctrl_macb0_default: macb0_default {
+					pinmux = <PIN_PD9__GTXCK>,
+						 <PIN_PD10__GTXEN>,
+						 <PIN_PD11__GRXDV>,
+						 <PIN_PD12__GRXER>,
+						 <PIN_PD13__GRX0>,
+						 <PIN_PD14__GRX1>,
+						 <PIN_PD15__GTX0>,
+						 <PIN_PD16__GTX1>,
+						 <PIN_PD17__GMDC>,
+						 <PIN_PD18__GMDIO>;
+					bias-disable;
+				};
+
+				pinctrl_macb0_phy_irq: macb0_phy_irq {
+					pinmux = <PIN_PD31__GPIO>;
+					bias-disable;
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/at91-sama5d27_som1_ek.dts b/src/arm/microchip/at91-sama5d27_som1_ek.dts
new file mode 100644
index 0000000..d0a6dbd
--- /dev/null
+++ b/src/arm/microchip/at91-sama5d27_som1_ek.dts
@@ -0,0 +1,552 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_som1_ek.dts - Device Tree file for SAMA5D27-SOM1-EK board
+ *
+ *  Copyright (c) 2017, Microchip Technology Inc.
+ *                2016 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *                2017 Cristian Birsan <cristian.birsan@microchip.com>
+ *                2017 Claudiu Beznea <claudiu.beznea@microchip.com>
+ */
+/dts-v1/;
+#include "at91-sama5d27_som1.dtsi"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Atmel SAMA5D27 SOM1 EK";
+	compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart1;	/* DBGU */
+		serial1 = &uart4;	/* mikro BUS 1 */
+		serial2 = &uart2;	/* mikro BUS 2 */
+		i2c1 = &i2c1;
+		i2c2 = &i2c3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ahb {
+		usb0: gadget@300000 {
+			atmel,vbus-gpio = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@400000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
+					   &pioA PIN_PA27 GPIO_ACTIVE_HIGH
+					   0
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: ehci@500000 {
+			status = "okay";
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			bus-width = <8>;
+			mmc-ddr-3_3v;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc0_default>;
+			status = "okay";
+		};
+
+		sdmmc1: sdio-host@b0000000 {
+			bus-width = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc1_default>;
+			status = "okay";
+		};
+
+		apb {
+			isc: isc@f0008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
+			};
+
+			qspi1: spi@f0024000 {
+				status = "okay";
+			};
+
+			spi0: spi@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_default>;
+				status = "okay";
+			};
+
+			macb0: ethernet@f8008000 {
+				status = "okay";
+			};
+
+			tcb0: timer@f800c000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			uart1: serial@f8020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_default>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			uart2: serial@f8024000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mikrobus2_uart>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			pwm0: pwm@f802c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>;
+				status = "disabled"; /* Conflict with leds. */
+			};
+
+			flx1: flexcom@f8038000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+				status = "okay";
+
+				i2c3: i2c@600 {
+					dmas = <0>, <0>;
+					i2c-analog-filter;
+					i2c-digital-filter;
+					i2c-digital-filter-width-ns = <35>;
+					pinctrl-names = "default", "gpio";
+					pinctrl-0 = <&pinctrl_mikrobus_i2c>;
+					pinctrl-1 = <&pinctrl_i2c3_gpio>;
+					sda-gpios = <&pioA PIN_PA24 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PA23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+					status = "okay";
+				};
+			};
+
+			poweroff@f8048010 {
+				debounce-delay-us = <976>;
+				atmel,wakeup-rtc-timer;
+
+				input@0 {
+					reg = <0>;
+				};
+			};
+
+			watchdog@f8048040 {
+				status = "okay";
+			};
+
+			uart3: serial@fc008000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3_default>;
+				status = "disabled"; /* Conflict with isc. */
+			};
+
+			uart4: serial@fc00c000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mikrobus1_uart>;
+				status = "okay";
+			};
+
+			flx3: flexcom@fc014000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+				status = "disabled";
+
+				uart8: serial@200 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx3_default>;
+					status = "disabled"; /* Conflict with isc. */
+				};
+
+				spi5: spi@400 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx3_default>;
+					status = "disabled"; /* Conflict with isc. */
+				};
+			};
+
+			flx4: flexcom@fc018000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+				status = "okay";
+
+				uart9: serial@200 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx4_default>;
+					status = "disabled"; /* Conflict with spi6 and i2c6. */
+				};
+
+				spi6: spi@400 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
+					status = "okay"; /* Conflict with uart5 and i2c6. */
+				};
+
+				i2c6: i2c@600 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx4_default>;
+					status = "disabled"; /* Conflict with uart5 and spi6. */
+				};
+			};
+
+			i2c1: i2c@fc028000 {
+				dmas = <0>, <0>;
+				i2c-analog-filter;
+				i2c-digital-filter;
+				i2c-digital-filter-width-ns = <35>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c1_default>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "okay";
+			};
+
+			adc: adc@fc030000 {
+				vddana-supply = <&vddana>;
+				vref-supply = <&advref>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mikrobus1_an &pinctrl_mikrobus2_an>;
+
+				status = "okay";
+			};
+
+			pinctrl@fc038000 {
+
+				pinctrl_can1_default: can1_default {
+					pinmux = <PIN_PC26__CANTX1>,
+						 <PIN_PC27__CANRX1>;
+					bias-disable;
+				};
+
+				pinctrl_flx3_default: flx3_default {
+					pinmux = <PIN_PC20__FLEXCOM3_IO0>,
+						 <PIN_PC19__FLEXCOM3_IO1>,
+						 <PIN_PC18__FLEXCOM3_IO2>,
+						 <PIN_PC21__FLEXCOM3_IO3>,
+						 <PIN_PC22__FLEXCOM3_IO4>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_default: i2c1_default {
+					pinmux = <PIN_PD4__TWD1>,
+						 <PIN_PD5__TWCK1>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_gpio: i2c1_gpio {
+                                        pinmux = <PIN_PD4__GPIO>,
+                                                 <PIN_PD5__GPIO>;
+                                        bias-disable;
+                                };
+
+
+				pinctrl_isc_base: isc_base {
+					pinmux = <PIN_PC21__ISC_PCK>,
+						 <PIN_PC22__ISC_VSYNC>,
+						 <PIN_PC23__ISC_HSYNC>,
+						 <PIN_PC24__ISC_MCK>;
+					bias-disable;
+				};
+
+				pinctrl_isc_data_8bit: isc_data_8bit {
+					pinmux = <PIN_PC20__ISC_D11>,
+						 <PIN_PC19__ISC_D10>,
+						 <PIN_PC18__ISC_D9>,
+						 <PIN_PC17__ISC_D8>,
+						 <PIN_PC16__ISC_D7>,
+						 <PIN_PC15__ISC_D6>,
+						 <PIN_PC14__ISC_D5>,
+						 <PIN_PC13__ISC_D4>;
+					bias-disable;
+				};
+
+				pinctrl_isc_data_9_10: isc_data_9_10 {
+					pinmux = <PIN_PC12__ISC_D3>,
+						 <PIN_PC11__ISC_D2>;
+					bias-disable;
+				};
+
+				pinctrl_isc_data_11_12: isc_data_11_12 {
+					pinmux = <PIN_PC10__ISC_D1>,
+						 <PIN_PC9__ISC_D0>;
+					bias-disable;
+				};
+
+				pinctrl_key_gpio_default: key_gpio_default {
+					pinmux = <PIN_PA29__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_led_gpio_default: led_gpio_default {
+					pinmux = <PIN_PA10__GPIO>,
+						 <PIN_PB1__GPIO>,
+						 <PIN_PA31__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_sdmmc0_default: sdmmc0_default {
+					cmd_data {
+						pinmux = <PIN_PA1__SDMMC0_CMD>,
+							 <PIN_PA2__SDMMC0_DAT0>,
+							 <PIN_PA3__SDMMC0_DAT1>,
+							 <PIN_PA4__SDMMC0_DAT2>,
+							 <PIN_PA5__SDMMC0_DAT3>,
+							 <PIN_PA6__SDMMC0_DAT4>,
+							 <PIN_PA7__SDMMC0_DAT5>,
+							 <PIN_PA8__SDMMC0_DAT6>,
+							 <PIN_PA9__SDMMC0_DAT7>;
+						bias-disable;
+					};
+
+					ck_cd_vddsel {
+						pinmux = <PIN_PA0__SDMMC0_CK>,
+							 <PIN_PA11__SDMMC0_VDDSEL>,
+							 <PIN_PA13__SDMMC0_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_sdmmc1_default: sdmmc1_default {
+					cmd_data {
+						pinmux = <PIN_PA28__SDMMC1_CMD>,
+							 <PIN_PA18__SDMMC1_DAT0>,
+							 <PIN_PA19__SDMMC1_DAT1>,
+							 <PIN_PA20__SDMMC1_DAT2>,
+							 <PIN_PA21__SDMMC1_DAT3>;
+						bias-disable;
+					};
+
+					conf-ck_cd {
+						pinmux = <PIN_PA22__SDMMC1_CK>,
+							 <PIN_PA30__SDMMC1_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_spi0_default: spi0_default {
+					pinmux = <PIN_PA14__SPI0_SPCK>,
+						 <PIN_PA15__SPI0_MOSI>,
+						 <PIN_PA16__SPI0_MISO>,
+						 <PIN_PA17__SPI0_NPCS0>;
+					bias-disable;
+				};
+
+				pinctrl_uart1_default: uart1_default {
+					pinmux = <PIN_PD2__URXD1>,
+						 <PIN_PD3__UTXD1>;
+					bias-disable;
+				};
+
+				pinctrl_uart3_default: uart3_default {
+					pinmux = <PIN_PC12__URXD3>,
+						 <PIN_PC13__UTXD3>;
+					bias-disable;
+				};
+
+				pinctrl_usb_default: usb_default {
+					pinmux = <PIN_PA27__GPIO>,
+						 <PIN_PD19__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_usba_vbus: usba_vbus {
+					pinmux = <PIN_PD20__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_an: mikrobus1_an {
+					pinmux = <PIN_PD25__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_an: mikrobus2_an {
+					pinmux = <PIN_PD26__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_rst: mikrobus1_rst {
+					pinmux = <PIN_PB2__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_rst: mikrobus2_rst {
+					pinmux = <PIN_PA26__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
+					pinmux = <PIN_PD0__FLEXCOM4_IO4>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs {
+					pinmux = <PIN_PC31__FLEXCOM4_IO3>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus_spi: mikrobus_spi {
+					pinmux = <PIN_PC28__FLEXCOM4_IO0>,
+						 <PIN_PC29__FLEXCOM4_IO1>,
+						 <PIN_PC30__FLEXCOM4_IO2>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_pwm: mikrobus1_pwm {
+					pinmux = <PIN_PB1__PWML1>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_pwm: mikrobus2_pwm {
+					pinmux = <PIN_PA31__PWML0>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_int: mikrobus1_int {
+					pinmux = <PIN_PB0__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_int: mikrobus2_int {
+					pinmux = <PIN_PA25__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_uart: mikrobus1_uart {
+					pinmux = <PIN_PB3__URXD4>,
+						 <PIN_PB4__UTXD4>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_uart: mikrobus2_uart {
+					pinmux = <PIN_PD23__URXD2>,
+						 <PIN_PD24__UTXD2>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus_i2c: mikrobus1_i2c {
+					pinmux = <PIN_PA24__FLEXCOM1_IO0>,
+						 <PIN_PA23__FLEXCOM1_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_i2c3_gpio: i2c3_gpio {
+					pinmux = <PIN_PA24__GPIO>,
+						 <PIN_PA23__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_flx4_default: flx4_uart_default {
+					pinmux = <PIN_PC28__FLEXCOM4_IO0>,
+						 <PIN_PC29__FLEXCOM4_IO1>,
+						 <PIN_PC30__FLEXCOM4_IO2>,
+						 <PIN_PC31__FLEXCOM4_IO3>,
+						 <PIN_PD0__FLEXCOM4_IO4>;
+					bias-disable;
+				};
+			};
+
+			can1: can@fc050000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_default>;
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button {
+			label = "USER";
+			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay"; /* Conflict with pwm0. */
+
+		led-red {
+			label = "red";
+			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vddin_3v3: fixed-regulator-vddin_3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDDIN_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		status = "okay";
+	};
+
+	vddana: fixed-regulator-vddana {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDDANA";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vddin_3v3>;
+		status = "okay";
+	};
+
+	advref: fixed-regulator-advref {
+		compatible = "regulator-fixed";
+
+		regulator-name = "advref";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vddana>;
+		status = "okay";
+	};
+};
diff --git a/src/arm/microchip/at91-sama5d27_wlsom1.dtsi b/src/arm/microchip/at91-sama5d27_wlsom1.dtsi
new file mode 100644
index 0000000..4617805
--- /dev/null
+++ b/src/arm/microchip/at91-sama5d27_wlsom1.dtsi
@@ -0,0 +1,386 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_wlsom1.dtsi - Device Tree file for SAMA5D27 WLSOM1
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
+ * Author: Eugen Hristev <eugen.hristev@microcihp.com>
+ */
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Microchip SAMA5D27 WLSOM1";
+	compatible = "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		i2c0 = &i2c0;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-wilc1000";
+		reset-gpios = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
+		powerdown-gpios = <&pioA PIN_PA29 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&pinctrl_wilc_pwrseq>;
+		pinctrl-names = "default";
+	};
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+
+	uart6: serial@200 {
+		pinctrl-0 = <&pinctrl_flx1_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	pinctrl-names = "default", "gpio";
+	sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&pioA PIN_PD19 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	mcp16502@5b {
+		compatible = "microchip,mcp16502";
+		reg = <0x5b>;
+		status = "okay";
+		lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>;
+
+		regulators {
+			vdd_3v3: VDD_IO {
+				regulator-name = "VDD_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddio_ddr: VDD_DDR {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_core: VDD_CORE {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_ddr: VDD_OTHER {
+				regulator-name = "VDD_OTHER";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&macb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	phy-mode = "rmii";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+		interrupt-parent = <&pioA>;
+		interrupts = <PIN_PB24 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+	};
+};
+
+&pmc {
+	atmel,osc-bypass;
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_default>;
+	status = "disabled";
+
+	qspi1_flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		spi-cs-setup-ns = <7>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		m25p,fast-read;
+		status = "disabled";
+
+		at91bootstrap@0 {
+			label = "at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "kernel";
+			reg = <0x200000 0x600000>;
+		};
+	};
+};
+
+&pioA {
+	pinctrl_flx1_default: flx1_usart_default {
+		pinmux = <PIN_PA24__FLEXCOM1_IO0>,
+			 <PIN_PA23__FLEXCOM1_IO1>,
+			 <PIN_PA25__FLEXCOM1_IO3>,
+			 <PIN_PA26__FLEXCOM1_IO4>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_default: i2c0_default {
+		pinmux = <PIN_PD21__TWD0>,
+			 <PIN_PD22__TWCK0>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_gpio: i2c0_gpio {
+		pinmux = <PIN_PD21__GPIO>,
+			 <PIN_PD22__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		pinmux = <PIN_PD19__TWD1>,
+			 <PIN_PD20__TWCK1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_gpio: i2c1_gpio {
+		pinmux = <PIN_PD19__GPIO>,
+			 <PIN_PD20__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_default: macb0_default {
+		pinmux = <PIN_PB14__GTXCK>,
+			 <PIN_PB15__GTXEN>,
+			 <PIN_PB16__GRXDV>,
+			 <PIN_PB17__GRXER>,
+			 <PIN_PB18__GRX0>,
+			 <PIN_PB19__GRX1>,
+			 <PIN_PB20__GTX0>,
+			 <PIN_PB21__GTX1>,
+			 <PIN_PB22__GMDC>,
+			 <PIN_PB23__GMDIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_phy_irq: macb0_phy_irq {
+		pinmux = <PIN_PB24__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_qspi1_default: qspi1_default {
+		pinmux = <PIN_PB5__QSPI1_SCK>,
+			 <PIN_PB6__QSPI1_CS>,
+			 <PIN_PB7__QSPI1_IO0>,
+			 <PIN_PB8__QSPI1_IO1>,
+			 <PIN_PB9__QSPI1_IO2>,
+			 <PIN_PB10__QSPI1_IO3>;
+		bias-pull-up;
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1_default {
+		cmd-data {
+			pinmux = <PIN_PA28__SDMMC1_CMD>,
+				 <PIN_PA18__SDMMC1_DAT0>,
+				 <PIN_PA19__SDMMC1_DAT1>,
+				 <PIN_PA20__SDMMC1_DAT2>,
+				 <PIN_PA21__SDMMC1_DAT3>;
+			bias-disable;
+		};
+
+		conf-ck {
+			pinmux = <PIN_PA22__SDMMC1_CK>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_wilc_default: wilc_default {
+		conf-irq {
+			pinmux = <PIN_PB25__GPIO>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_wilc_pwrseq: wilc_pwrseq {
+		conf-ce-nrst {
+			pinmux = <PIN_PA27__GPIO>,
+				 <PIN_PA29__GPIO>;
+			bias-disable;
+		};
+
+		conf-rtcclk {
+			pinmux = <PIN_PB13__PCK1>;
+			bias-disable;
+		};
+	};
+};
+
+&sdmmc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	no-1-8-v;
+	non-removable;
+	bus-width = <4>;
+	status = "okay";
+
+	wilc: wifi@0 {
+		reg = <0>;
+		compatible = "microchip,wilc1000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wilc_default>;
+		clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+		clock-names = "rtc";
+		interrupts = <PIN_PB25 IRQ_TYPE_NONE>;
+		interrupt-parent = <&pioA>;
+		assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+		assigned-clock-rates = <32768>;
+	};
+};
+
diff --git a/src/arm/microchip/at91-sama5d27_wlsom1_ek.dts b/src/arm/microchip/at91-sama5d27_wlsom1_ek.dts
new file mode 100644
index 0000000..e055b9e
--- /dev/null
+++ b/src/arm/microchip/at91-sama5d27_wlsom1_ek.dts
@@ -0,0 +1,269 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_wlsom1_ek.dts - Device Tree file for SAMA5D27 WLSOM1 EK
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
+ */
+/dts-v1/;
+#include "at91-sama5d27_wlsom1.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Microchip SAMA5D27 WLSOM1 EK";
+	compatible = "microchip,sama5d27-wlsom1-ek", "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;	/* DBGU */
+		serial1 = &uart6;	/* BT */
+		serial2 = &uart5;	/* mikro BUS 2 */
+		serial3 = &uart3;	/* mikro BUS 1 */
+		i2c1 = &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-1 {
+			label = "USER BUTTON";
+			gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay";
+
+		led-red {
+			label = "red";
+			gpios = <&pioA PIN_PA6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioA PIN_PA7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioA PIN_PA8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd_3v3>;
+	vref-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default>;
+	status = "okay";
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart5: serial@200 {
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		pinctrl-names = "default";
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&flx1 {
+	status = "okay";
+
+	uart6: serial@200 {
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&macb0 {
+	status = "okay";
+};
+
+&pioA {
+	/*
+	 * There is no real pinmux for ADC, if the pin
+	 * is not requested by another peripheral then
+	 * the muxing is done when channel is enabled.
+	 * Requesting pins for ADC is GPIO is
+	 * encouraged to prevent conflicts and to
+	 * disable bias in order to be in the same
+	 * state when the pin is not muxed to the adc.
+	 */
+	pinctrl_adc_default: adc_default {
+		pinmux = <PIN_PD25__GPIO>,
+			 <PIN_PD26__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_flx0_default: flx0_usart_default {
+		pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+			 <PIN_PB29__FLEXCOM0_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PB2__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led_gpio_default {
+		pinmux = <PIN_PA6__GPIO>,
+			 <PIN_PA7__GPIO>,
+			 <PIN_PA8__GPIO>;
+		bias-pull-down;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0_default {
+		cmd_data {
+			pinmux = <PIN_PA1__SDMMC0_CMD>,
+				 <PIN_PA2__SDMMC0_DAT0>,
+				 <PIN_PA3__SDMMC0_DAT1>,
+				 <PIN_PA4__SDMMC0_DAT2>,
+				 <PIN_PA5__SDMMC0_DAT3>;
+			bias-disable;
+		};
+
+		ck_cd_vddsel {
+			pinmux = <PIN_PA0__SDMMC0_CK>,
+				 <PIN_PA11__SDMMC0_VDDSEL>,
+				 <PIN_PA12__SDMMC0_WP>,
+				 <PIN_PA13__SDMMC0_CD>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart0_default: uart0_default {
+		pinmux = <PIN_PB26__URXD0>,
+			 <PIN_PB27__UTXD0>;
+		bias-disable;
+	};
+
+	pinctrl_uart3_default: uart3_default {
+		pinmux = <PIN_PB11__URXD3>,
+			 <PIN_PB12__UTXD3>;
+		bias-disable;
+	};
+
+	pinctrl_pwm0_default: pwm0_default {
+		pinmux = <PIN_PA31__PWML0>,
+			 <PIN_PA30__PWMH0>;
+		bias-disable;
+	};
+
+	pinctrl_usb_default: usb_default {
+		pinmux = <PIN_PA10__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_usba_vbus: usba_vbus {
+		pinmux = <PIN_PA16__GPIO>;
+		bias-disable;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default>;
+	status = "okay";
+};
+
+&qspi1 {
+	status = "okay";
+
+	qspi1_flash: flash@0 {
+		status = "okay";
+	};
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	mmc-ddr-3_3v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_default>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioA PIN_PA16 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioA PIN_PA10 GPIO_ACTIVE_HIGH
+			   0
+			  >;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	phy_type = "hsic";
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
diff --git a/src/arm/microchip/at91-sama5d29_curiosity.dts b/src/arm/microchip/at91-sama5d29_curiosity.dts
new file mode 100644
index 0000000..6b02b7b
--- /dev/null
+++ b/src/arm/microchip/at91-sama5d29_curiosity.dts
@@ -0,0 +1,600 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d29_curiosity.dts - Device Tree file for SAMA5D29 Curiosity board
+ *
+ * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Mihai Sain <mihai.sain@microchip.com>
+ *
+ */
+/dts-v1/;
+#include "sama5d29.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+
+/ {
+	model = "Microchip SAMA5D29 Curiosity";
+	compatible = "microchip,sama5d29-curiosity", "atmel,sama5d29", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;	// debug
+		serial1 = &uart1;	// RPi
+		serial2 = &uart3;	// mikro BUS 2
+		serial3 = &uart4;	// mikro BUS 1
+		serial4 = &uart6;	// flx1 Bluetooth
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-1 {
+			label = "USER BUTTON";
+			gpios = <&pioA PIN_PA17 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay";
+
+		led-red {
+			label = "red";
+			gpios = <&pioA PIN_PA7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioA PIN_PA8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioA PIN_PA9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x20000000>;
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd_3v3>;
+	vref-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+	status = "okay";
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart6: serial@200 {
+		pinctrl-0 = <&pinctrl_flx1_default>;
+		pinctrl-names = "default";
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi6: spi@400 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rpi_spi>;
+		status = "okay";
+	};
+};
+
+&i2c0 {
+	dmas = <0>, <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	sda-gpios = <&pioA PIN_PB31 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PC0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	i2c-sda-hold-time-ns = <350>;
+	status = "okay";
+
+	mcp16502@5b {
+		compatible = "microchip,mcp16502";
+		reg = <0x5b>;
+		status = "okay";
+		lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>;
+
+		regulators {
+			vdd_3v3: VDD_IO {
+				regulator-name = "VDD_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddio_ddr: VDD_DDR {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_core: VDD_CORE {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_ddr: VDD_OTHER {
+				regulator-name = "VDD_OTHER";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	i2c-analog-filter;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
+	sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pioA {
+	pinctrl_adc_default: adc-default {
+		pinmux = <PIN_PD25__GPIO>,
+			 <PIN_PD26__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_adtrg_default: adtrg-default {
+		pinmux = <PIN_PD31__ADTRG>;
+		bias-pull-up;
+	};
+
+	pinctrl_can0_default: can0-default {
+		pinmux = <PIN_PC10__CANTX0>,
+			 <PIN_PC11__CANRX0>;
+		bias-disable;
+	};
+
+	pinctrl_can1_default: can1-default {
+		pinmux = <PIN_PC26__CANTX1>,
+			 <PIN_PC27__CANRX1>;
+		bias-disable;
+	};
+
+	pinctrl_debug_uart: debug-uart {
+		pinmux = <PIN_PB26__URXD0>,
+			 <PIN_PB27__UTXD0>;
+		bias-disable;
+	};
+
+	pinctrl_flx1_default: flx1-default {
+		pinmux = <PIN_PA24__FLEXCOM1_IO0>,
+			 <PIN_PA23__FLEXCOM1_IO1>,
+			 <PIN_PA25__FLEXCOM1_IO3>,
+			 <PIN_PA26__FLEXCOM1_IO4>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_default: i2c0-default {
+		pinmux = <PIN_PB31__TWD0>,
+			 <PIN_PC0__TWCK0>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_gpio: i2c0-gpio-default {
+		pinmux = <PIN_PB31__GPIO>,
+			 <PIN_PC0__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		pinmux = <PIN_PD4__TWD1>,
+			 <PIN_PD5__TWCK1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-default {
+		pinmux = <PIN_PD4__GPIO>,
+			 <PIN_PD5__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_key_gpio_default: key-gpio-default {
+		pinmux = <PIN_PA17__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led-gpio-default {
+		pinmux = <PIN_PA7__GPIO>,
+			 <PIN_PA8__GPIO>,
+			 <PIN_PA9__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_mikrobus1_pwm: mikrobus1-pwm {
+		pinmux = <PIN_PA31__PWML0>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_pwm: mikrobus2-pwm {
+		pinmux = <PIN_PB0__PWMH1>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_uart: mikrobus1-uart {
+		pinmux = <PIN_PB3__URXD4>,
+			 <PIN_PB4__UTXD4>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_uart: mikrobus2-uart {
+		pinmux = <PIN_PB11__URXD3>,
+			 <PIN_PB12__UTXD3>;
+		bias-disable;
+	};
+
+	pinctrl_qspi1_default: qspi1-default {
+		pinmux = <PIN_PB5__QSPI1_SCK>,
+			 <PIN_PB6__QSPI1_CS>,
+			 <PIN_PB7__QSPI1_IO0>,
+			 <PIN_PB8__QSPI1_IO1>,
+			 <PIN_PB9__QSPI1_IO2>,
+			 <PIN_PB10__QSPI1_IO3>;
+		bias-disable;
+	};
+
+	pinctrl_rpi_spi: rpi-spi {
+		pinmux = <PIN_PD12__FLEXCOM4_IO0>,
+			 <PIN_PD13__FLEXCOM4_IO1>,
+			 <PIN_PD14__FLEXCOM4_IO2>,
+			 <PIN_PD15__FLEXCOM4_IO3>,
+			 <PIN_PD16__FLEXCOM4_IO4>;
+		bias-disable;
+	};
+
+	pinctrl_rpi_uart: rpi-uart {
+		pinmux = <PIN_PD2__URXD1>,
+			 <PIN_PD3__UTXD1>;
+		bias-disable;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0-default {
+		pinmux = <PIN_PA0__SDMMC0_CK>,
+			 <PIN_PA1__SDMMC0_CMD>,
+			 <PIN_PA2__SDMMC0_DAT0>,
+			 <PIN_PA3__SDMMC0_DAT1>,
+			 <PIN_PA4__SDMMC0_DAT2>,
+			 <PIN_PA5__SDMMC0_DAT3>,
+			 <PIN_PA11__SDMMC0_VDDSEL>,
+			 <PIN_PA13__SDMMC0_CD>;
+		bias-disable;
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1-default {
+		pinmux = <PIN_PA18__SDMMC1_DAT0>,
+			 <PIN_PA19__SDMMC1_DAT1>,
+			 <PIN_PA20__SDMMC1_DAT2>,
+			 <PIN_PA21__SDMMC1_DAT3>,
+			 <PIN_PA22__SDMMC1_CK>,
+			 <PIN_PA28__SDMMC1_CMD>,
+			 <PIN_PA30__SDMMC1_CD>;
+		bias-disable;
+	};
+
+	pinctrl_spi1_default: spi1-default {
+		pinmux = <PIN_PC1__SPI1_SPCK>,
+			 <PIN_PC2__SPI1_MOSI>,
+			 <PIN_PC3__SPI1_MISO>,
+			 <PIN_PC4__SPI1_NPCS0>,
+			 <PIN_PC5__SPI1_NPCS1>,
+			 <PIN_PC6__SPI1_NPCS2>,
+			 <PIN_PC7__SPI1_NPCS3>;
+		bias-disable;
+	};
+
+	pinctrl_usb_default: usb-default {
+		pinmux = <PIN_PA6__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_usba_vbus: usba-vbus {
+		pinmux = <PIN_PB13__GPIO>;
+		bias-disable;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>;
+	status = "okay";
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_default>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+		label = "atmel_qspi1";
+		status = "okay";
+
+		at91bootstrap@0 {
+			label = "at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "kernel";
+			reg = <0x200000 0x600000>;
+		};
+	};
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	disable-wp;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	disable-wp;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_debug_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rpi_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus2_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioA PIN_PB13 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioA PIN_PA6 GPIO_ACTIVE_HIGH
+			   0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/src/arm/microchip/at91-sama5d2_icp.dts b/src/arm/microchip/at91-sama5d2_icp.dts
new file mode 100644
index 0000000..999adec
--- /dev/null
+++ b/src/arm/microchip/at91-sama5d2_icp.dts
@@ -0,0 +1,790 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d2_icp.dts - Device Tree file for SAMA5D2-ICP board
+ *
+ *  Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ *	Author: Radu Pirea & Razvan Stefanescu,
+ *		Codrin Ciubotariu <codrin.ciubotariu@microchip.com>,
+ *		Cristian Birsan <cristian.birsan@microchip.com>
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+
+/ {
+	model = "Microchip SAMA5D2-ICP";
+	compatible = "microchip,sama5d2-icp", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;	/* debug uart0 + mikro BUS 1 */
+		serial1 = &uart1;	/* mikro BUS 3 */
+		serial3 = &uart3;	/* mikro BUS 2 */
+		serial5 = &uart7;	/* flx2 */
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-1 {
+			label = "USER_PB1";
+			gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay"; /* conflict with pwm0 */
+
+		led-red {
+			label = "red";
+			gpios = <&pioA PIN_PB0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd_io_reg>;
+	vref-supply = <&vdd_io_reg>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+	status = "okay";
+};
+
+&flx0 { /* mikrobus2 spi */
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi2: spi@400 {
+		dmas = <0>, <0>;
+		cs-gpios = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mikrobus2_spi &pinctrl_ksz_spi_cs>;
+		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch0: ksz8563@0 {
+			compatible = "microchip,ksz8563";
+			reg = <0>;
+			reset-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_LOW>;
+
+			spi-max-frequency = <500000>;
+			spi-cpha;
+			spi-cpol;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					label = "lan1";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan2";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "cpu";
+					ethernet = <&macb0>;
+					phy-mode = "mii";
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&flx2 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart7: serial@200 {
+		pinctrl-0 = <&pinctrl_flx2_default>;
+		pinctrl-names = "default";
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay"; /* Conflict w/ qspi1. */
+	};
+};
+
+&flx3 { /* mikrobus1 spi */
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi5: spi@400 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>;
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c6: i2c@600 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		mcp16502@5b {
+			compatible = "microchip,mcp16502";
+			reg = <0x5b>;
+			status = "okay";
+			lpm-gpios = <&pioBU 7 GPIO_ACTIVE_LOW>;
+
+			regulators {
+				vdd_io_reg: VDD_IO {
+					regulator-name = "VDD_IO";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				VDD_DDR {
+					regulator-name = "VDD_DDR";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				VDD_CORE {
+					regulator-name = "VDD_CORE";
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				VDD_OTHER {
+					regulator-name = "VDD_OTHER";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1850000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				LDO1 {
+					regulator-name = "LDO1";
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				LDO2 {
+					regulator-name = "LDO2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+			};
+		};
+	};
+};
+
+&i2c0 { /* mikrobus i2c */
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_mikrobus_i2c>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
+	status = "okay";
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&pioA PIN_PD19 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+		status = "okay";
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+		status = "disabled";
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+		status = "disabled";
+	};
+};
+
+&macb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq &pinctrl_macb0_rst>;
+	phy-mode = "mii";
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&pioA {
+	pinctrl_adc_default: adc_default {
+		pinmux = <PIN_PD24__GPIO>,
+				<PIN_PD25__GPIO>,
+				<PIN_PD26__GPIO>;
+		bias-disable;
+	};
+
+	/*
+	 * The ADTRG pin can work on any edge type.
+	 * In here it's being pulled up, so need to
+	 * connect it to ground to get an edge e.g.
+	 * Trigger can be configured on falling, rise
+	 * or any edge, and the pull-up can be changed
+	 * to pull-down or left floating according to
+	 * needs.
+	 */
+	pinctrl_adtrg_default: adtrg_default {
+		pinmux = <PIN_PD31__ADTRG>;
+		bias-pull-up;
+	};
+
+	pinctrl_flx4_default: flx4_default {
+		pinmux = <PIN_PC28__FLEXCOM4_IO0>,
+			 <PIN_PC29__FLEXCOM4_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_can0_default: can0_default {
+		pinmux = <PIN_PC10__CANTX0>,
+			 <PIN_PC11__CANRX0>;
+		bias-disable;
+	};
+
+	pinctrl_can1_default: can1_default {
+		pinmux = <PIN_PC26__CANTX1>,
+			 <PIN_PC27__CANRX1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		pinmux = <PIN_PD19__TWD1>,
+			 <PIN_PD20__TWCK1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_gpio: i2c1_gpio {
+                pinmux = <PIN_PD19__GPIO>,
+                         <PIN_PD20__GPIO>;
+                bias-disable;
+        };
+
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PD0__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led_gpio_default {
+		pinmux = <PIN_PB0__GPIO>,
+			 <PIN_PB1__GPIO>,
+			 <PIN_PA31__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_qspi1_default: qspi1_default {
+		pinmux = <PIN_PA6__QSPI1_SCK>,
+			 <PIN_PA7__QSPI1_IO0>,
+			 <PIN_PA8__QSPI1_IO1>,
+			 <PIN_PA9__QSPI1_IO2>,
+			 <PIN_PA10__QSPI1_IO3>,
+			 <PIN_PA11__QSPI1_CS>;
+		bias-disable;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0_default {
+		cmd_data {
+			pinmux = <PIN_PA1__SDMMC0_CMD>,
+				 <PIN_PA2__SDMMC0_DAT0>,
+				 <PIN_PA3__SDMMC0_DAT1>,
+				 <PIN_PA4__SDMMC0_DAT2>,
+				 <PIN_PA5__SDMMC0_DAT3>;
+			bias-disable;
+		};
+
+		ck_cd {
+			pinmux = <PIN_PA0__SDMMC0_CK>,
+				 <PIN_PA13__SDMMC0_CD>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1_default {
+		cmd_data {
+			pinmux = <PIN_PA18__SDMMC1_DAT0>,
+				 <PIN_PA19__SDMMC1_DAT1>,
+				 <PIN_PA20__SDMMC1_DAT2>,
+				 <PIN_PA21__SDMMC1_DAT3>;
+			bias-disable;
+		};
+
+		ck_cd {
+			pinmux = <PIN_PA22__SDMMC1_CK>,
+				 <PIN_PA28__SDMMC1_CMD>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_mikrobus_i2c: mikrobus_i2c {
+		pinmux = <PIN_PD22__TWCK0>,
+			 <PIN_PD21__TWD0>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_gpio: i2c0_gpio {
+		pinmux = <PIN_PD21__GPIO>,
+			 <PIN_PD22__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_an: mikrobus1_an {
+		pinmux = <PIN_PD26__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_rst: mikrobus1_rst {
+		pinmux = <PIN_PC5__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
+		pinmux = <PIN_PC21__FLEXCOM3_IO3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi: mikrobus1_spi {
+		pinmux = <PIN_PC20__FLEXCOM3_IO0>,
+			 <PIN_PC19__FLEXCOM3_IO1>,
+			 <PIN_PC18__FLEXCOM3_IO2>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_pwm: mikrobus1_pwm {
+		pinmux = <PIN_PC4__TIOB1>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_int: mikrobus1_int {
+		pinmux = <PIN_PC3__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_uart: mikrobus1_uart {
+		pinmux = <PIN_PB26__URXD0>,
+			 <PIN_PB27__UTXD0>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_an: mikrobus2_an {
+		pinmux = <PIN_PD25__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_rst: mikrobus2_rst {
+		pinmux = <PIN_PB24__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs {
+		pinmux = <PIN_PB31__FLEXCOM0_IO3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_spi: mikrobus2_spi {
+		pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+			 <PIN_PB29__FLEXCOM0_IO1>,
+			 <PIN_PB30__FLEXCOM0_IO2>;
+		bias-disable;
+	};
+
+	pinctrl_ksz_spi_cs: ksz_spi_cs {
+		pinmux = <PIN_PC0__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_pwm: mikrobus2_pwm {
+		pinmux = <PIN_PB23__TIOB2>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_int: mikrobus2_int {
+		pinmux = <PIN_PB22__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_uart: mikrobus2_uart {
+		pinmux = <PIN_PC12__URXD3>,
+			 <PIN_PC13__UTXD3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_an: mikrobus3_an {
+		pinmux = <PIN_PD24__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_rst: mikrobus3_rst {
+		pinmux = <PIN_PB21__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_spi_cs: mikrobus3_spi_cs {
+		pinmux = <PIN_PA17__SPI0_NPCS0>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_spi: mikrobus3_spi {
+		pinmux = <PIN_PA14__SPI0_SPCK>,
+			 <PIN_PA16__SPI0_MISO>,
+			 <PIN_PA15__SPI0_MOSI>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_pwm: mikrobus3_pwm {
+		pinmux = <PIN_PB20__TIOB3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_int: mikrobus3_int {
+		pinmux = <PIN_PB18__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_uart: mikrobus3_uart {
+		pinmux = <PIN_PC7__URXD1>,
+			 <PIN_PC8__UTXD1>;
+		bias-disable;
+	};
+
+	pinctrl_usb_default: usb_default {
+		pinmux = <PIN_PC17__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_usba_vbus: usba_vbus {
+		pinmux = <PIN_PD23__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_pwm0_pwm2_default: pwm0_pwm2_default {
+		pinmux = <PIN_PB5__PWMH2>,
+			 <PIN_PB6__PWML2>;
+		bias-pull-up;
+	};
+
+	pinctrl_macb0_default: macb0_default {
+		pinmux = <PIN_PD1__GRXCK>,
+			 <PIN_PD2__GTXER>,
+			 <PIN_PD5__GRX2>,
+			 <PIN_PD6__GRX3>,
+			 <PIN_PD7__GTX2>,
+			 <PIN_PD8__GTX3>,
+			 <PIN_PD9__GTXCK>,
+			 <PIN_PD10__GTXEN>,
+			 <PIN_PD11__GRXDV>,
+			 <PIN_PD12__GRXER>,
+			 <PIN_PD13__GRX0>,
+			 <PIN_PD14__GRX1>,
+			 <PIN_PD15__GTX0>,
+			 <PIN_PD16__GTX1>,
+			 <PIN_PD17__GMDC>,
+			 <PIN_PD18__GMDIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_phy_irq: macb0_phy_irq {
+		pinmux = <PIN_PD3__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_rst: macb0_sw_rst {
+		pinmux = <PIN_PD4__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_flx2_default: flx2_default {
+		pinmux = <PIN_PA6__FLEXCOM2_IO0>,
+			 <PIN_PA7__FLEXCOM2_IO1>,
+			 <PIN_PA9__FLEXCOM2_IO3>,
+			 <PIN_PA10__FLEXCOM2_IO4>;
+		bias-disable;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_pwm2_default>;
+	status = "disabled"; /* conflict with leds, HSIC */
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_default>;
+	status = "disabled"; /* Conflict with wilc_pwrseq, flx2 */
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		spi-cs-setup-ns = <7>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+
+		at91bootstrap@0 {
+			label = "qspi: at91bootstrap";
+			reg = <0x00000000 0x00040000>;
+		};
+
+		bootloader@40000 {
+			label = "qspi: bootloader";
+			reg = <0x00040000 0x000c0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "qspi: bootloader env redundant";
+			reg = <0x00100000 0x00040000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "qspi: bootloader env";
+			reg = <0x00140000 0x00040000>;
+		};
+
+		dtb@180000 {
+			label = "qspi: device tree";
+			reg = <0x00180000 0x00080000>;
+		};
+
+		kernel@200000 {
+			label = "qspi: kernel";
+			reg = <0x00200000 0x00600000>;
+		};
+	};
+};
+
+&sdmmc0 {
+	no-1-8-v;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&spi0 {  /* mikrobus3 spi */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus3_spi &pinctrl_mikrobus3_spi_cs>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus3_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus2_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioA PIN_PD23 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	phy_type = "hsic";
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/src/arm/microchip/at91-sama5d2_ptc_ek.dts b/src/arm/microchip/at91-sama5d2_ptc_ek.dts
new file mode 100644
index 0000000..200b205
--- /dev/null
+++ b/src/arm/microchip/at91-sama5d2_ptc_ek.dts
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * at91-sama5d2_ptc_ek.dts - Device Tree file for SAMA5D2 PTC EK board
+ *
+ *  Copyright (C) 2017 Microchip/Atmel,
+ *		  2017 Wenyou Yang <wenyou.yang@microchip.com>
+ *		  2017 Ludovic Desroches <ludovic.desroches@microchip.com>
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Atmel SAMA5D2 PTC EK";
+	compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;	/* DBGU */
+		i2c0 = &i2c0;	/* mikroBUS 1 */
+		i2c1 = &i2c1;	/* XPRO EXT1 */
+		i2c2 = &i2c2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	ahb {
+		usb0: gadget@300000 {
+			atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@400000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioA PIN_PB12 GPIO_ACTIVE_HIGH
+					   0
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: ehci@500000 {
+			status = "okay";
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand_default>;
+			status = "okay"; /* conflicts with sdmmc1 and qspi0 */
+
+			nand_controller: nand-controller {
+				status = "okay";
+
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0xc0000>;
+						};
+
+						bootloaderenvred@100000 {
+							label = "bootloader env redundant";
+							reg = <0x100000 0x40000>;
+						};
+
+						bootloaderenv@140000 {
+							label = "bootloader env";
+							reg = <0x140000 0x40000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x1f800000>;
+						};
+					};
+				};
+			};
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			bus-width = <8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc0_default>;
+			status = "okay";
+		};
+
+		apb {
+			spi0: spi@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_default>;
+				status = "okay";
+			};
+
+			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioA>;
+					interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+
+			tcb0: timer@f800c000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			uart0: serial@f801c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0_default>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			uart2: serial@f8024000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2_default>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			i2c0: i2c@f8028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c0_default>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "okay";
+			};
+
+			flx0: flexcom@f8034000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+				status = "okay";
+
+				i2c2: i2c@600 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default", "gpio";
+					pinctrl-0 = <&pinctrl_flx0_default>;
+					pinctrl-1 = <&pinctrl_flx0_gpio>;
+					sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+					status = "okay";
+				};
+			};
+
+			poweroff@f8048010 {
+				debounce-delay-us = <976>;
+
+				input@0 {
+					reg = <0>;
+				};
+			};
+
+			watchdog@f8048040 {
+				status = "okay";
+			};
+
+			spi1: spi@fc000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1_default>;
+				status = "okay";
+			};
+
+			i2c1: i2c@fc028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c1_default>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioA PIN_PC6 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PC7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "okay";
+
+				at24@50 {
+					compatible = "atmel,24c02";
+					reg = <0x50>;
+					pagesize = <8>;
+				};
+			};
+
+			pinctrl@fc038000 {
+				pinctrl_flx0_default: flx0_default {
+					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+						 <PIN_PB29__FLEXCOM0_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_flx0_gpio: flx0_gpio {
+					pinmux = <PIN_PB28__GPIO>,
+						 <PIN_PB29__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_default: i2c0_default {
+					pinmux = <PIN_PD21__TWD0>,
+						 <PIN_PD22__TWCK0>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_gpio: i2c0_gpio {
+					pinmux = <PIN_PD21__GPIO>,
+						 <PIN_PD22__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_default: i2c1_default {
+					pinmux = <PIN_PC6__TWD1>,
+						 <PIN_PC7__TWCK1>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_gpio: i2c1_gpio {
+					pinmux = <PIN_PC6__GPIO>,
+						 <PIN_PC7__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_key_gpio_default: key_gpio_default {
+					pinmux = <PIN_PA10__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_led_gpio_default: led_gpio_default {
+					pinmux = <PIN_PB6__GPIO>,
+						 <PIN_PB8__GPIO>,
+						 <PIN_PB10__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_macb0_default: macb0_default {
+					pinmux = <PIN_PB14__GTXCK>,
+						 <PIN_PB15__GTXEN>,
+						 <PIN_PB16__GRXDV>,
+						 <PIN_PB17__GRXER>,
+						 <PIN_PB18__GRX0>,
+						 <PIN_PB19__GRX1>,
+						 <PIN_PB20__GTX0>,
+						 <PIN_PB21__GTX1>,
+						 <PIN_PB22__GMDC>,
+						 <PIN_PB23__GMDIO>;
+					bias-disable;
+				};
+
+				pinctrl_macb0_phy_irq: macb0_phy_irq {
+					pinmux = <PIN_PB24__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_nand_default: nand_default {
+					re_we_data {
+						pinmux = <PIN_PA22__D0>,
+							 <PIN_PA23__D1>,
+							 <PIN_PA24__D2>,
+							 <PIN_PA25__D3>,
+							 <PIN_PA26__D4>,
+							 <PIN_PA27__D5>,
+							 <PIN_PA28__D6>,
+							 <PIN_PA29__D7>,
+							 <PIN_PA30__NWE_NANDWE>,
+							 <PIN_PB2__NRD_NANDOE>;
+						bias-pull-up;
+						atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
+					};
+
+					ale_cle_rdy_cs {
+						pinmux = <PIN_PB0__A21_NANDALE>,
+							 <PIN_PB1__A22_NANDCLE>,
+							 <PIN_PC8__NANDRDY>,
+							 <PIN_PA31__NCS3>;
+						bias-pull-up;
+					};
+				};
+
+				pinctrl_sdmmc0_default: sdmmc0_default {
+					cmd_data {
+						pinmux = <PIN_PA1__SDMMC0_CMD>,
+							 <PIN_PA2__SDMMC0_DAT0>,
+							 <PIN_PA3__SDMMC0_DAT1>,
+							 <PIN_PA4__SDMMC0_DAT2>,
+							 <PIN_PA5__SDMMC0_DAT3>,
+							 <PIN_PA6__SDMMC0_DAT4>,
+							 <PIN_PA7__SDMMC0_DAT5>,
+							 <PIN_PA8__SDMMC0_DAT6>,
+							 <PIN_PA9__SDMMC0_DAT7>;
+						bias-pull-up;
+					};
+
+					ck_cd_vddsel {
+						pinmux = <PIN_PA0__SDMMC0_CK>,
+							 <PIN_PA11__SDMMC0_VDDSEL>,
+							 <PIN_PA13__SDMMC0_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_spi0_default: spi0_default {
+					pinmux = <PIN_PA14__SPI0_SPCK>,
+						 <PIN_PA15__SPI0_MOSI>,
+						 <PIN_PA16__SPI0_MISO>,
+						 <PIN_PA17__SPI0_NPCS0>;
+					bias-disable;
+				};
+
+				pinctrl_spi1_default: spi1_default {
+					pinmux = <PIN_PC1__SPI1_SPCK>,
+						 <PIN_PC2__SPI1_MOSI>,
+						 <PIN_PC3__SPI1_MISO>,
+						 <PIN_PC4__SPI1_NPCS0>;
+					bias-disable;
+				};
+
+				pinctrl_uart0_default: uart0_default {
+					pinmux = <PIN_PB26__URXD0>,
+						 <PIN_PB27__UTXD0>;
+					bias-disable;
+				};
+
+				pinctrl_uart2_default: uart2_default {
+					pinmux = <PIN_PD23__URXD2>,
+						 <PIN_PD24__UTXD2>;
+					bias-disable;
+				};
+
+				pinctrl_usb_default: usb_default {
+					pinmux = <PIN_PB12__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_usba_vbus: usba_vbus {
+					pinmux = <PIN_PB11__GPIO>;
+					bias-disable;
+				};
+
+			};
+
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-1 {
+			label = "PB_USER";
+			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay";
+
+		led-red {
+			label = "red";
+			gpios = <&pioA PIN_PB10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/src/arm/microchip/at91-sama5d2_xplained.dts b/src/arm/microchip/at91-sama5d2_xplained.dts
new file mode 100644
index 0000000..6680031
--- /dev/null
+++ b/src/arm/microchip/at91-sama5d2_xplained.dts
@@ -0,0 +1,745 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d2_xplained.dts - Device Tree file for SAMA5D2 Xplained board
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/active-semi,8945a-regulator.h>
+
+/ {
+	model = "Atmel SAMA5D2 Xplained";
+	compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart1;	/* DBGU */
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;		/* XPRO EXT2 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		usb0: gadget@300000 {
+			atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@400000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
+					   &pioA PIN_PB10 GPIO_ACTIVE_HIGH
+					   0
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: ehci@500000 {
+			status = "okay";
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			bus-width = <8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc0_default>;
+			non-removable;
+			mmc-ddr-3_3v;
+			status = "okay";
+		};
+
+		sdmmc1: sdio-host@b0000000 {
+			bus-width = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc1_default>;
+			status = "okay"; /* conflict with qspi0 */
+			vqmmc-supply = <&vdd_3v3_reg>;
+			vmmc-supply = <&vdd_3v3_reg>;
+		};
+
+		apb {
+			qspi0: spi@f0020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_qspi0_default>;
+				status = "disabled"; /* conflict with sdmmc1 */
+
+				flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "jedec,spi-nor";
+					reg = <0>;
+					spi-max-frequency = <80000000>;
+					spi-tx-bus-width = <4>;
+					spi-rx-bus-width = <4>;
+					m25p,fast-read;
+
+					at91bootstrap@0 {
+						label = "at91bootstrap";
+						reg = <0x00000000 0x00040000>;
+					};
+
+					bootloader@40000 {
+						label = "bootloader";
+						reg = <0x00040000 0x000c0000>;
+					};
+
+					bootloaderenvred@100000 {
+						label = "bootloader env redundant";
+						reg = <0x00100000 0x00040000>;
+					};
+
+					bootloaderenv@140000 {
+						label = "bootloader env";
+						reg = <0x00140000 0x00040000>;
+					};
+
+					dtb@180000 {
+						label = "device tree";
+						reg = <0x00180000 0x00080000>;
+					};
+
+					kernel@200000 {
+						label = "kernel";
+						reg = <0x00200000 0x00600000>;
+					};
+
+					misc@800000 {
+						label = "misc";
+						reg = <0x00800000 0x00000000>;
+					};
+				};
+			};
+
+			spi0: spi@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_default>;
+				status = "okay";
+
+				flash@0 {
+					compatible = "atmel,at25df321a";
+					reg = <0>;
+					spi-max-frequency = <50000000>;
+				};
+			};
+
+			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioA>;
+					interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+
+			tcb0: timer@f800c000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			uart1: serial@f8020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_default>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			i2c0: i2c@f8028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c0_default>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				i2c-sda-hold-time-ns = <350>;
+				status = "okay";
+
+				pmic@5b {
+					compatible = "active-semi,act8945a";
+					reg = <0x5b>;
+					active-semi,vsel-high;
+					status = "okay";
+
+					regulators {
+						vdd_1v35_reg: REG_DCDC1 {
+							regulator-name = "VDD_1V35";
+							regulator-min-microvolt = <1350000>;
+							regulator-max-microvolt = <1350000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-on-in-suspend;
+								regulator-suspend-min-microvolt = <1400000>;
+								regulator-suspend-max-microvolt = <1400000>;
+								regulator-changeable-in-suspend;
+								regulator-mode = <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							};
+						};
+
+						vdd_1v2_reg: REG_DCDC2 {
+							regulator-name = "VDD_1V2";
+							regulator-min-microvolt = <1100000>;
+							regulator-max-microvolt = <1300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_3v3_reg: REG_DCDC3 {
+							regulator-name = "VDD_3V3";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_fuse_reg: REG_LDO1 {
+							regulator-name = "VDD_FUSE";
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_3v3_lp_reg: REG_LDO2 {
+							regulator-name = "VDD_3V3_LP";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_led_reg: REG_LDO3 {
+							regulator-name = "VDD_LED";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_sdhc_1v8_reg: REG_LDO4 {
+							regulator-name = "VDD_SDHC_1V8";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+					};
+
+					charger {
+						compatible = "active-semi,act8945a-charger";
+						pinctrl-names = "default";
+						pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+						interrupt-parent = <&pioA>;
+						interrupts = <PIN_PB13 IRQ_TYPE_EDGE_RISING>;
+
+						active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
+						active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
+						active-semi,input-voltage-threshold-microvolt = <6600>;
+						active-semi,precondition-timeout = <40>;
+						active-semi,total-timeout = <3>;
+						status = "okay";
+					};
+				};
+			};
+
+			pwm0: pwm@f802c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwm2_default>;
+				status = "disabled"; /* conflict with leds */
+			};
+
+			flx0: flexcom@f8034000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+				status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
+
+				uart5: serial@200 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx0_default>;
+					status = "okay";
+				};
+
+				i2c2: i2c@600 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default", "gpio";
+					pinctrl-0 = <&pinctrl_flx0_default>;
+					pinctrl-1 = <&pinctrl_i2c2_gpio>;
+					sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+					i2c-sda-hold-time-ns = <350>;
+					i2c-analog-filter;
+					i2c-digital-filter;
+					i2c-digital-filter-width-ns = <35>;
+					status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
+				};
+			};
+
+			poweroff@f8048010 {
+				debounce-delay-us = <976>;
+				atmel,wakeup-rtc-timer;
+
+				input@0 {
+					reg = <0>;
+				};
+			};
+
+			watchdog@f8048040 {
+				status = "okay";
+			};
+
+			i2s0: i2s@f8050000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2s0_default>;
+				status = "disabled"; /* conflict with can0 */
+			};
+
+			can0: can@f8054000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can0_default>;
+				status = "okay";
+			};
+
+			uart3: serial@fc008000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3_default>;
+				status = "okay";
+			};
+
+			flx4: flexcom@fc018000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+				status = "okay";
+
+				i2c6: i2c@600 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default", "gpio";
+					pinctrl-0 = <&pinctrl_flx4_default>;
+					pinctrl-1 = <&pinctrl_flx4_gpio>;
+					sda-gpios = <&pioA PIN_PD12 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PD13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+					i2c-analog-filter;
+					i2c-digital-filter;
+					i2c-digital-filter-width-ns = <35>;
+					status = "okay";
+				};
+			};
+
+			i2c1: i2c@fc028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c1_default>;
+				i2c-analog-filter;
+				i2c-digital-filter;
+				i2c-digital-filter-width-ns = <35>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "okay";
+
+				at24@54 {
+					compatible = "atmel,24c02";
+					reg = <0x54>;
+					pagesize = <16>;
+				};
+			};
+
+			adc: adc@fc030000 {
+				vddana-supply = <&vdd_3v3_lp_reg>;
+				vref-supply = <&vdd_3v3_lp_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+				status = "okay";
+			};
+
+			pinctrl@fc038000 {
+				/*
+				 * There is no real pinmux for ADC, if the pin
+				 * is not requested by another peripheral then
+				 * the muxing is done when channel is enabled.
+				 * Requesting pins for ADC is GPIO is
+				 * encouraged to prevent conflicts and to
+				 * disable bias in order to be in the same
+				 * state when the pin is not muxed to the adc.
+				 */
+				pinctrl_adc_default: adc_default {
+					pinmux = <PIN_PD23__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_can0_default: can0_default {
+					pinmux = <PIN_PC10__CANTX0>,
+						 <PIN_PC11__CANRX0>;
+					bias-disable;
+				};
+
+				pinctrl_can1_default: can1_default {
+					pinmux = <PIN_PC26__CANTX1>,
+						 <PIN_PC27__CANRX1>;
+					bias-disable;
+				};
+
+				/*
+				 * The ADTRG pin can work on any edge type.
+				 * In here it's being pulled up, so need to
+				 * connect it to ground to get an edge e.g.
+				 * Trigger can be configured on falling, rise
+				 * or any edge, and the pull-up can be changed
+				 * to pull-down or left floating according to
+				 * needs.
+				 */
+				pinctrl_adtrg_default: adtrg_default {
+					pinmux = <PIN_PD31__ADTRG>;
+					bias-pull-up;
+				};
+
+				pinctrl_charger_chglev: charger_chglev {
+					pinmux = <PIN_PA12__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_charger_irq: charger_irq {
+					pinmux = <PIN_PB13__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_charger_lbo: charger_lbo {
+					pinmux = <PIN_PC8__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_classd_default_pfets: classd_default_pfets {
+					pinmux = <PIN_PB1__CLASSD_R0>,
+						 <PIN_PB3__CLASSD_R2>;
+					bias-pull-up;
+				};
+
+				pinctrl_classd_default_nfets: classd_default_nfets {
+					pinmux = <PIN_PB2__CLASSD_R1>,
+						 <PIN_PB4__CLASSD_R3>;
+					bias-pull-down;
+				};
+
+				pinctrl_flx0_default: flx0_default {
+					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+						 <PIN_PB29__FLEXCOM0_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_flx4_default: flx4_default {
+					pinmux = <PIN_PD12__FLEXCOM4_IO0>,
+						 <PIN_PD13__FLEXCOM4_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_flx4_gpio: flx4_gpio {
+					pinmux = <PIN_PD12__GPIO>,
+						 <PIN_PD13__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_default: i2c0_default {
+					pinmux = <PIN_PD21__TWD0>,
+						 <PIN_PD22__TWCK0>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_gpio: i2c0_gpio {
+					pinmux = <PIN_PD21__GPIO>,
+						 <PIN_PD22__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_default: i2c1_default {
+					pinmux = <PIN_PD4__TWD1>,
+						 <PIN_PD5__TWCK1>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_gpio: i2c1_gpio {
+					pinmux = <PIN_PD4__GPIO>,
+						 <PIN_PD5__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c2_gpio: i2c2_gpio {
+					pinmux = <PIN_PB28__GPIO>,
+						 <PIN_PB29__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2s0_default: i2s0_default {
+					pinmux = <PIN_PC1__I2SC0_CK>,
+						 <PIN_PC2__I2SC0_MCK>,
+						 <PIN_PC3__I2SC0_WS>,
+						 <PIN_PC4__I2SC0_DI0>,
+						 <PIN_PC5__I2SC0_DO0>;
+					bias-disable;
+				};
+
+				pinctrl_i2s1_default: i2s1_default {
+					pinmux = <PIN_PA15__I2SC1_CK>,
+						 <PIN_PA14__I2SC1_MCK>,
+						 <PIN_PA16__I2SC1_WS>,
+						 <PIN_PA17__I2SC1_DI0>,
+						 <PIN_PA18__I2SC1_DO0>;
+					bias-disable;
+				};
+
+				pinctrl_key_gpio_default: key_gpio_default {
+					pinmux = <PIN_PB9__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_led_gpio_default: led_gpio_default {
+					pinmux = <PIN_PB0__GPIO>,
+						 <PIN_PB5__GPIO>,
+						 <PIN_PB6__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_macb0_default: macb0_default {
+					pinmux = <PIN_PB14__GTXCK>,
+						 <PIN_PB15__GTXEN>,
+						 <PIN_PB16__GRXDV>,
+						 <PIN_PB17__GRXER>,
+						 <PIN_PB18__GRX0>,
+						 <PIN_PB19__GRX1>,
+						 <PIN_PB20__GTX0>,
+						 <PIN_PB21__GTX1>,
+						 <PIN_PB22__GMDC>,
+						 <PIN_PB23__GMDIO>;
+					bias-disable;
+				};
+
+				pinctrl_macb0_phy_irq: macb0_phy_irq {
+					pinmux = <PIN_PC9__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_qspi0_default: qspi0_default {
+					sck_cs {
+						pinmux = <PIN_PA22__QSPI0_SCK>,
+							 <PIN_PA23__QSPI0_CS>;
+						bias-disable;
+					};
+
+					data {
+						pinmux = <PIN_PA24__QSPI0_IO0>,
+							 <PIN_PA25__QSPI0_IO1>,
+							 <PIN_PA26__QSPI0_IO2>,
+							 <PIN_PA27__QSPI0_IO3>;
+						bias-pull-up;
+					};
+				};
+
+				pinctrl_sdmmc0_default: sdmmc0_default {
+					cmd_data {
+						pinmux = <PIN_PA1__SDMMC0_CMD>,
+							 <PIN_PA2__SDMMC0_DAT0>,
+							 <PIN_PA3__SDMMC0_DAT1>,
+							 <PIN_PA4__SDMMC0_DAT2>,
+							 <PIN_PA5__SDMMC0_DAT3>,
+							 <PIN_PA6__SDMMC0_DAT4>,
+							 <PIN_PA7__SDMMC0_DAT5>,
+							 <PIN_PA8__SDMMC0_DAT6>,
+							 <PIN_PA9__SDMMC0_DAT7>;
+						bias-disable;
+					};
+
+					ck_cd_rstn {
+						pinmux = <PIN_PA0__SDMMC0_CK>,
+							 <PIN_PA10__SDMMC0_RSTN>,
+							 <PIN_PA13__SDMMC0_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_sdmmc1_default: sdmmc1_default {
+					cmd_data {
+						pinmux = <PIN_PA28__SDMMC1_CMD>,
+							 <PIN_PA18__SDMMC1_DAT0>,
+							 <PIN_PA19__SDMMC1_DAT1>,
+							 <PIN_PA20__SDMMC1_DAT2>,
+							 <PIN_PA21__SDMMC1_DAT3>;
+						bias-disable;
+					};
+
+					conf-ck_cd {
+						pinmux = <PIN_PA22__SDMMC1_CK>,
+							 <PIN_PA30__SDMMC1_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_spi0_default: spi0_default {
+					pinmux = <PIN_PA14__SPI0_SPCK>,
+						 <PIN_PA15__SPI0_MOSI>,
+						 <PIN_PA16__SPI0_MISO>,
+						 <PIN_PA17__SPI0_NPCS0>;
+					bias-disable;
+				};
+
+				pinctrl_uart1_default: uart1_default {
+					pinmux = <PIN_PD2__URXD1>,
+						 <PIN_PD3__UTXD1>;
+					bias-disable;
+				};
+
+				pinctrl_uart3_default: uart3_default {
+					pinmux = <PIN_PB11__URXD3>,
+						 <PIN_PB12__UTXD3>;
+					bias-disable;
+				};
+
+				pinctrl_usb_default: usb_default {
+					pinmux = <PIN_PB10__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_usba_vbus: usba_vbus {
+					pinmux = <PIN_PA31__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_pwm0_pwm2_default: pwm0_pwm2_default {
+					pinmux = <PIN_PB5__PWMH2>,
+						 <PIN_PB6__PWML2>;
+					bias-pull-up;
+				};
+			};
+
+			classd: classd@fc048000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_classd_default_pfets &pinctrl_classd_default_nfets>;
+				atmel,pwm-type = "diff";
+				atmel,non-overlap-time = <10>;
+				status = "okay";
+			};
+
+			i2s1: i2s@fc04c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2s1_default>;
+				status = "disabled"; /* conflict with spi0, sdmmc1 */
+			};
+
+			can1: can@fc050000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_default>;
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button {
+			label = "PB_USER";
+			gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay"; /* conflict with pwm0 */
+
+		led-red {
+			label = "red";
+			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>;
+		};
+
+
+		led-green {
+			label = "green";
+			gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/src/arm/microchip/at91-sama5d3_eds.dts b/src/arm/microchip/at91-sama5d3_eds.dts
new file mode 100644
index 0000000..c287b03
--- /dev/null
+++ b/src/arm/microchip/at91-sama5d3_eds.dts
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * at91-sama5d3_eds.dts - Device Tree file for the SAMA5D3 Ethernet
+ *    Development System board.
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Jerry Ray <jerry.ray@microchip.com>
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+
+/ {
+	model = "SAMA5D3 Ethernet Development System";
+	compatible = "microchip,sama5d3-eds", "atmel,sama5d36",
+		     "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		button-3 {
+			label = "PB_USER";
+			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+			wakeup-source;
+		};
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	vcc_3v3_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vcc_2v5_reg: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+		vin-supply = <&vcc_3v3_reg>;
+	};
+
+	vcc_1v8_reg: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vcc_3v3_reg>;
+	};
+
+	vcc_1v2_reg: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+	};
+
+	vcc_mmc0_reg: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc0-card-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
+		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	nand_controller: nand-controller {
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x2>;
+			atmel,rb = <0>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <4>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				bootloader@40000 {
+					label = "bootloader";
+					reg = <0x40000 0xc0000>;
+				};
+
+				bootloaderenvred@100000 {
+					label = "bootloader env redundant";
+					reg = <0x100000 0x40000>;
+				};
+
+				bootloaderenv@140000 {
+					label = "bootloader env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x0f800000>;
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&pinctrl_i2c0_pu>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&pinctrl_i2c2_pu>;
+	status = "okay";
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&mmc0 {
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3
+		     &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+	vmmc-supply = <&vcc_mmc0_reg>;
+	vqmmc-supply = <&vcc_3v3_reg>;
+	status = "okay";
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+		cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_i2c0_pu: i2c0-pu {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_i2c2_pu: i2c2-pu {
+			atmel,pins =
+				<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_key_gpio: key-gpio-0 {
+			atmel,pins =
+				<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		pinctrl_mmc0_cd: mmc0-cd {
+			atmel,pins =
+				<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		/* Reserved for reset signal to the RGMII connector. */
+		pinctrl_rgmii_rstn: rgmii-rstn {
+			atmel,pins =
+				<AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		/* Reserved for an interrupt line from the RMII and RGMII connectors. */
+		pinctrl_spi_irqn: spi-irqn {
+			atmel,pins =
+				<AT91_PIOB 28 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_spi0_cs: spi0-cs-default {
+			atmel,pins =
+				<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				 AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi1_cs: spi1-cs-default {
+			atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins =
+				<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_usb_default: usb-default {
+			atmel,pins =
+				<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				 AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		/* Reserved for VBUS fault interrupt. */
+		pinctrl_vbusfault_irqn: vbusfault-irqn {
+			atmel,pins =
+				<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_vcc_mmc0_reg_gpio: vcc-mmc0-reg-gpio-default {
+			atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&spi0 {
+	pinctrl-names = "default", "cs";
+	pinctrl-1 = <&pinctrl_spi0_cs>;
+	cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default", "cs";
+	pinctrl-1 = <&pinctrl_spi1_cs>;
+	cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioC 28 0>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {	/* USB Device port with VBUS detection. */
+	atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {	/* 3-port Host. First port is unused. */
+	atmel,vbus-gpio = <0
+			   &pioE 3 GPIO_ACTIVE_HIGH
+			   &pioE 4 GPIO_ACTIVE_HIGH
+			  >;
+	num-ports = <3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/src/arm/microchip/at91-sama5d3_ksz9477_evb.dts b/src/arm/microchip/at91-sama5d3_ksz9477_evb.dts
new file mode 100644
index 0000000..b665700
--- /dev/null
+++ b/src/arm/microchip/at91-sama5d3_ksz9477_evb.dts
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+
+/ {
+	model = "EVB-KSZ9477";
+	compatible = "microchip,sama5d3-ksz9477-evb", "atmel,sama5d36",
+		     "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = &dbgu;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vcc_mmc0: regulator-mmc0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mcc0_vcc>;
+		regulator-name = "mmc0-vcc";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&pinctrl_i2c0_pu>;
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rgmii";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&mmc0 {
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3
+		     &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+		cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+		disable-wp;
+		vmmc-supply = <&reg_vcc_mmc0>;
+		vqmmc-supply = <&reg_3v3>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&spi0 {
+	cs-gpios = <&pioD 13 GPIO_ACTIVE_LOW>, <0>, <0>,
+		   <&pioD 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-0 = <&pinctrl_spi_ksz>;
+	cs-gpios = <&pioC 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	switch@0 {
+		compatible = "microchip,ksz9477";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-cpha;
+		spi-cpol;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+				phy-mode = "internal";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+				phy-mode = "internal";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+				phy-mode = "internal";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+				phy-mode = "internal";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan5";
+				phy-mode = "internal";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&macb0>;
+				phy-mode = "rgmii-txid";
+				tx-internal-delay-ps = <2000>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pinctrl {
+	board {
+		pinctrl_i2c0_pu: i2c0-pu {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_mmc0_cd: mmc0-cd {
+			atmel,pins = <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_mcc0_vcc: mmc0-vcc {
+			atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi_ksz: spi-ksz {
+			atmel,pins =
+				<
+				/* SPI1_MISO */
+				AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				/* SPI1_MOSI */
+				AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE
+				/* SPI1_SPCK */
+				AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE
+
+				/* SPI CS */
+				AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				/* switch IRQ */
+				AT91_PIOB 28 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH
+				/* switch PME_N, SoC IN */
+				AT91_PIOC 30 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP
+				/* switch RST */
+				AT91_PIOC 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH
+				>;
+		};
+
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins =
+				<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+	};
+};
diff --git a/src/arm/microchip/at91-sama5d3_xplained.dts b/src/arm/microchip/at91-sama5d3_xplained.dts
new file mode 100644
index 0000000..8200337
--- /dev/null
+++ b/src/arm/microchip/at91-sama5d3_xplained.dts
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
+ *
+ *  Copyright (C) 2014 Atmel,
+ *		  2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "SAMA5D3 Xplained";
+	compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f0000000 {
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+				vmmc-supply = <&vcc_mmc0_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <8>;
+					cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			mmc1: mmc@f8000000 {
+				vmmc-supply = <&vcc_3v3_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "disabled";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 1 GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			spi0: spi@f0004000 {
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi0_cs>;
+				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			tcb0: timer@f0010000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			i2c0: i2c@f0014000 {
+				pinctrl-0 = <&pinctrl_i2c0_pu>;
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+
+				pmic: act8865@5b {
+					compatible = "active-semi,act8865";
+					reg = <0x5b>;
+					status = "disabled";
+
+					regulators {
+						vcc_1v8_reg: DCDC_REG1 {
+							regulator-name = "VCC_1V8";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-always-on;
+						};
+
+						vcc_1v2_reg: DCDC_REG2 {
+							regulator-name = "VCC_1V2";
+							regulator-min-microvolt = <1200000>;
+							regulator-max-microvolt = <1200000>;
+							regulator-always-on;
+						};
+
+						vcc_3v3_reg: DCDC_REG3 {
+							regulator-name = "VCC_3V3";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vddfuse_reg: LDO_REG1 {
+							regulator-name = "FUSE_2V5";
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+						};
+
+						vddana_reg: LDO_REG2 {
+							regulator-name = "VDDANA";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+					};
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii-rxid";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+				};
+			};
+
+			pwm0: pwm@f002c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwmh0_0 &pinctrl_pwm0_pwmh1_0>;
+				status = "okay";
+			};
+
+			usart0: serial@f001c000 {
+				status = "okay";
+			};
+
+			usart1: serial@f0020000 {
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+				status = "okay";
+			};
+
+			uart0: serial@f0024000 {
+				status = "okay";
+			};
+
+			mmc1: mmc@f8000000 {
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			spi1: spi@f8008000 {
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi1_cs>;
+				cs-gpios = <&pioC 25 0>;
+				status = "okay";
+			};
+
+			adc0: adc@f8018000 {
+				atmel,adc-vref = <3300>;
+				atmel,adc-channels-used = <0xfe>;
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_ad6
+					&pinctrl_adc0_ad7
+					>;
+				status = "okay";
+			};
+
+			i2c2: i2c@f801c000 {
+				dmas = <0>, <0>;	/* Do not use DMA for i2c2 */
+				pinctrl-0 = <&pinctrl_i2c2_pu>;
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			pinctrl@fffff200 {
+				board {
+					pinctrl_i2c0_pu: i2c0_pu {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_i2c2_pu: i2c2_pu {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_key_gpio: key_gpio_0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PE9, conflicts with A9 */
+					};
+					pinctrl_usb_default: usb_default {
+						atmel,pins =
+							<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_gpio_leds: gpio_leds_default {
+						atmel,pins =
+							<AT91_PIOE 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_spi0_cs: spi0_cs_default {
+						atmel,pins =
+							<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_spi1_cs: spi1_cs_default {
+						atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_vcc_mmc0_reg_gpio: vcc_mmc0_reg_gpio_default {
+						atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+			};
+		};
+
+		usb0: gadget@500000 {
+			atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;	/* PE9, conflicts with A9 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@600000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 3 GPIO_ACTIVE_LOW
+					   &pioE 4 GPIO_ACTIVE_LOW
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: ehci@700000 {
+			status = "okay";
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-ecc-strength = <4>;
+					nand-ecc-step-size = <512>;
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0xc0000>;
+						};
+
+						bootloaderenvred@100000 {
+							label = "bootloader env redundant";
+							reg = <0x100000 0x40000>;
+						};
+
+						bootloaderenv@140000 {
+							label = "bootloader env";
+							reg = <0x140000 0x40000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	vcc_mmc0_reg: fixedregulator_mmc0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
+		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+		regulator-name = "mmc0-card-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		button {
+			label = "PB_USER";
+			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+		status = "okay";
+
+		led-d2 {
+			label = "d2";
+			gpios = <&pioE 23 GPIO_ACTIVE_LOW>;	/* PE23, conflicts with A23, CTS2 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-d3 {
+			label = "d3"; /* Conflict with EBI CS0, USART2 CTS. */
+			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/src/arm/microchip/at91-sama5d4_ma5d4.dtsi b/src/arm/microchip/at91-sama5d4_ma5d4.dtsi
new file mode 100644
index 0000000..fd1086f
--- /dev/null
+++ b/src/arm/microchip/at91-sama5d4_ma5d4.dtsi
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+#include "sama5d4.dtsi"
+
+/ {
+	model = "Aries/DENX MA5D4";
+	compatible = "aries,ma5d4", "denx,ma5d4", "atmel,sama5d4", "atmel,sama5";
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+
+		clk20m: clk20m {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <20000000>;
+			clock-output-names = "clk20m";
+		};
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
+				vmmc-supply = <&vcc_mmc0_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <8>;
+					broken-cd;
+				};
+			};
+
+			spi0: spi@f8010000 {
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+
+				flash@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+			};
+
+			spi1: spi@fc018000 {
+				cs-gpios = <&pioB 22 0>, <&pioB 23 0>, <0>, <0>;
+				status = "okay";
+
+				can0: can@0 {
+					compatible = "microchip,mcp2515";
+					reg = <0>;
+					clocks = <&clk20m>;
+					interrupt-parent = <&pioE>;
+					interrupts = <6 IRQ_TYPE_EDGE_RISING>;
+					spi-max-frequency = <10000000>;
+				};
+
+				can1: can@1 {
+					compatible = "microchip,mcp2515";
+					reg = <1>;
+					clocks = <&clk20m>;
+					interrupt-parent = <&pioE>;
+					interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			tcb2: timer@fc024000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			adc0: adc@fc034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger conflicts with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				atmel,adc-vref = <3300>;
+				status = "okay";
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+		};
+	};
+
+	vcc_3v3_reg: fixedregulator_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_mmc0_reg: fixedregulator_mmc0 {
+		compatible = "regulator-fixed";
+		gpio = <&pioE 15 GPIO_ACTIVE_HIGH>;
+		regulator-name = "RST_n MCI0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_reg>;
+		regulator-boot-on;
+	};
+};
diff --git a/src/arm/microchip/at91-sama5d4_ma5d4evk.dts b/src/arm/microchip/at91-sama5d4_ma5d4evk.dts
new file mode 100644
index 0000000..8adf567
--- /dev/null
+++ b/src/arm/microchip/at91-sama5d4_ma5d4evk.dts
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "at91-sama5d4_ma5d4.dtsi"
+
+/ {
+	model = "Aries/DENX MA5D4EVK";
+	compatible = "aries,ma5d4evk", "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	ahb {
+		usb0: gadget@400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 11 GPIO_ACTIVE_LOW
+					   &pioE 14 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@600000 {
+			status = "okay";
+		};
+
+		apb {
+			hlcdc: hlcdc@f0000000 {
+				status = "okay";
+
+				hlcdc-display-controller {
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+					port@0 {
+						hlcdc_panel_output: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&panel_input>;
+						};
+					};
+				};
+
+			};
+
+			macb0: ethernet@f8020000 {
+				phy-mode = "rmii";
+				status = "okay";
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+
+			usart0: serial@f802c000 {
+				status = "okay";
+			};
+
+			usart1: serial@f8030000 {
+				status = "okay";
+			};
+
+			mmc1: mmc@fc000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				vmmc-supply = <&vcc_mmc1_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 5 0>;
+				};
+			};
+
+			adc0: adc@fc034000 {
+				atmel,adc-ts-wires = <4>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+			};
+
+
+			pinctrl@fc06a000 {
+				board {
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins = <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+				};
+			};
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led-user1 {
+			label = "user1";
+			gpios = <&pioD 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-user2 {
+			label = "user2";
+			gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-user3 {
+			label = "user3";
+			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	panel: panel {
+		/* Actually Ampire 800480R2 */
+		compatible = "foxlink,fl500wvr00-a0t";
+		backlight = <&backlight>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	vcc_mmc1_reg: fixedregulator_mmc1 {
+		compatible = "regulator-fixed";
+		gpio = <&pioE 17 GPIO_ACTIVE_LOW>;
+		regulator-name = "VDD MCI1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_reg>;
+	};
+};
diff --git a/src/arm/microchip/at91-sama5d4_xplained.dts b/src/arm/microchip/at91-sama5d4_xplained.dts
new file mode 100644
index 0000000..95d701d
--- /dev/null
+++ b/src/arm/microchip/at91-sama5d4_xplained.dts
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Josh Wu <josh.wu@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Atmel SAMA5D4 Xplained";
+	compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			uart0: serial@f8004000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			i2c0: i2c@f8014000 {
+				i2c-digital-filter;
+				status = "okay";
+			};
+
+			macb0: ethernet@f8020000 {
+				phy-mode = "rmii";
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&pioE>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+					reg = <1>;
+				};
+			};
+
+			mmc1: mmc@fc000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				vmmc-supply = <&vcc_mmc1_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 3 0>;
+				};
+			};
+
+			usart3: serial@fc00c000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			usart4: serial@fc010000 {
+				status = "okay";
+			};
+
+			spi1: spi@fc018000 {
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi1_cs>;
+				cs-gpios = <&pioB 21 0>;
+				status = "okay";
+			};
+
+			tcb2: timer@fc024000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			adc0: adc@fc034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger conflicts with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				atmel,adc-vref = <3300>;
+				status = "okay";
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+
+			pinctrl@fc06a000 {
+				board {
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+					pinctrl_usb_default: usb_default {
+						atmel,pins =
+							<AT91_PIOE 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_key_gpio: key_gpio_0 {
+						atmel,pins =
+							<AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_spi1_cs: spi1_cs_default {
+						atmel,pins =
+							<AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_gpio_leds: gpio_leds_default {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_vcc_mmc1_reg: vcc_mmc1_reg {
+						atmel,pins =
+							<AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+			};
+		};
+
+		usb0: gadget@400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 11 GPIO_ACTIVE_HIGH
+					   &pioE 14 GPIO_ACTIVE_HIGH
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: ehci@600000 {
+			status = "okay";
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe
+				     &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy
+				     &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0xc0000>;
+						};
+
+						bootloaderenvred@100000 {
+							label = "bootloader env redundant";
+							reg = <0x100000 0x40000>;
+						};
+
+						bootloaderenv@140000 {
+							label = "bootloader env";
+							reg = <0x140000 0x40000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x1f800000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		button {
+			label = "pb_user1";
+			gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+		status = "okay";
+
+		led-d8 {
+			label = "d8";
+			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-d10 {
+			label = "d10";
+			gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vcc_3v3_reg: fixedregulator_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_mmc1_reg: fixedregulator_mmc1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc1_reg>;
+		gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
+		regulator-name = "VDD MCI1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_reg>;
+		regulator-always-on;
+	};
+};
diff --git a/src/arm/microchip/at91-sama5d4ek.dts b/src/arm/microchip/at91-sama5d4ek.dts
new file mode 100644
index 0000000..20ac775
--- /dev/null
+++ b/src/arm/microchip/at91-sama5d4ek.dts
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d4ek.dts - Device Tree file for SAMA5D4 Evaluation Kit
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+
+/ {
+	model = "Atmel SAMA5D4-EK";
+	compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			adc0: adc@fc034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger conflicts with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				/* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */
+				atmel,adc-vref = <3300>;
+				/*atmel,adc-ts-wires = <4>;*/	/* Set up ADC touch screen */
+				status = "okay";		/* Enable ADC IIO support */
+			};
+
+			mmc0: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 5 0>;
+				};
+			};
+
+			ssc0: ssc@f8008000 {
+				status = "okay";
+			};
+
+			spi0: spi@f8010000 {
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+				flash@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+
+				wm8904: codec@1a {
+					compatible = "wlf,wm8904";
+					reg = <0x1a>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 10>;
+					clock-names = "mclk";
+				};
+
+				qt1070:keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioE>;
+					interrupts = <25 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+					wakeup-source;
+				};
+
+				touchscreen@4c {
+					compatible = "atmel,maxtouch";
+					reg = <0x4c>;
+					interrupt-parent = <&pioE>;
+					interrupts = <24 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_mxt_ts>;
+				};
+			};
+
+			macb0: ethernet@f8020000 {
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioE>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+
+			mmc1: mmc@fc000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 6 0>;
+				};
+			};
+
+			usart2: serial@fc008000 {
+				status = "okay";
+			};
+
+			usart3: serial@fc00c000 {
+				status = "okay";
+			};
+
+			usart4: serial@fc010000 {
+				status = "okay";
+			};
+
+			tcb2: timer@fc024000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+
+			pinctrl@fc06a000 {
+				board {
+					pinctrl_macb0_phy_irq: macb0_phy_irq {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOE 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_pck2_as_audio_mck: pck2_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+					pinctrl_key_gpio: key_gpio_0 {
+						atmel,pins =
+							<AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */
+					};
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOE 25 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_mxt_ts: mxt_irq {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+		};
+
+		usb0: gadget@400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */
+					   &pioE 11 GPIO_ACTIVE_LOW
+					   &pioE 12 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@600000 {
+			status = "okay";
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe
+				     &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy
+				     &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0x80000>;
+						};
+
+						bootloaderenv@c0000 {
+							label = "bootloader env";
+							reg = <0xc0000 0xc0000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		button {
+			label = "pb_user1";
+			gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led-d8 {
+			label = "d8";
+			/* PE28, conflicts with usart4 rts pin */
+			gpios = <&pioE 28 GPIO_ACTIVE_LOW>;
+		};
+
+		led-d9 {
+			label = "d9";
+			gpios = <&pioE 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-d10 {
+			label = "d10";
+			gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck2_as_audio_mck>;
+
+		atmel,model = "wm8904 @ SAMA5D4EK";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN1L", "Line In Jack",
+			"IN1R", "Line In Jack";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+	};
+};
diff --git a/src/arm/microchip/at91-sama7g5ek.dts b/src/arm/microchip/at91-sama7g5ek.dts
new file mode 100644
index 0000000..217e9b9
--- /dev/null
+++ b/src/arm/microchip/at91-sama7g5ek.dts
@@ -0,0 +1,834 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *  at91-sama7g5ek.dts - Device Tree file for SAMA7G5-EK board
+ *
+ *  Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries
+ *
+ *  Author: Eugen Hristev <eugen.hristev@microchip.com>
+ *  Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ *
+ */
+/dts-v1/;
+#include "sama7g5-pinfunc.h"
+#include "sama7g5.dtsi"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/sound/microchip,pdmc.h>
+
+/ {
+	model = "Microchip SAMA7G5-EK";
+	compatible = "microchip,sama7g5ek", "microchip,sama7g5", "microchip,sama7";
+
+	chosen {
+		bootargs = "rw root=/dev/mmcblk1p2 rootfstype=ext4 rootwait";
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart3;
+		serial1 = &uart4;
+		serial2 = &uart7;
+		serial3 = &uart0;
+		i2c0 = &i2c1;
+		i2c1 = &i2c8;
+		i2c2 = &i2c9;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button {
+			label = "PB_USER";
+			gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay"; /* Conflict with pwm. */
+
+		red_led {
+			label = "red";
+			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
+		};
+
+		green_led {
+			label = "green";
+			gpios = <&pioA PIN_PA13 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue_led {
+			label = "blue";
+			gpios = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	/* 512 M */
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x20000000>;
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sama7g5ek audio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			cpu {
+				sound-dai = <&spdiftx>;
+			};
+			codec {
+				sound-dai = <&spdif_out>;
+			};
+		};
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			cpu {
+				sound-dai = <&spdifrx>;
+			};
+			codec {
+				sound-dai = <&spdif_in>;
+			};
+		};
+	};
+
+	spdif_in: spdif-in {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dir";
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&adc {
+	vddana-supply = <&vddout25>;
+	vref-supply = <&vddout25>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <133000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		m25p,fast-read;
+
+		at91bootstrap@0 {
+			label = "ospi: at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "ospi: bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "ospi: bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "ospi: bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "ospi: device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "ospi: kernel";
+			reg = <0x200000 0x600000>;
+		};
+
+		rootfs@800000 {
+			label = "ospi: rootfs";
+			reg = <0x800000 0x7800000>;
+		};
+
+	};
+};
+
+&dma0 {
+	status = "okay";
+};
+
+&dma1 {
+	status = "okay";
+};
+
+&dma2 {
+	status = "okay";
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "disabled";
+
+	uart0: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		status = "disabled";
+	};
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c1: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		mcp16502@5b {
+			compatible = "microchip,mcp16502";
+			reg = <0x5b>;
+			status = "okay";
+
+			regulators {
+				vdd_3v3: VDD_IO {
+					regulator-name = "VDD_IO";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <3300000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddioddr: VDD_DDR {
+					regulator-name = "VDD_DDR";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcore: VDD_CORE {
+					regulator-name = "VDD_CORE";
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-voltage = <1150000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcpu: VDD_OTHER {
+					regulator-name = "VDD_OTHER";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-ramp-delay = <3125>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-voltage = <1050000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vldo1: LDO1 {
+					regulator-name = "LDO1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-suspend-voltage = <1800000>;
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				vldo2: LDO2 {
+					regulator-name = "LDO2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <3700000>;
+
+					regulator-state-standby {
+						regulator-suspend-voltage = <1800000>;
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+			};
+		};
+	};
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart3: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx3_default>;
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart4: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		status = "okay";
+	};
+};
+
+&flx7 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart7: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx7_default>;
+		status = "okay";
+	};
+};
+
+&flx8 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c8: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c8_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+	};
+};
+
+&flx9 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c9: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c9_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+	};
+};
+
+&flx11 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi11: spi@400 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>;
+		status = "okay";
+	};
+};
+
+&gmac0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gmac0_default
+		     &pinctrl_gmac0_mdio_default
+		     &pinctrl_gmac0_txck_default
+		     &pinctrl_gmac0_phy_irq>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	ethernet-phy@7 {
+		reg = <0x7>;
+		interrupt-parent = <&pioA>;
+		interrupts = <PIN_PA31 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&gmac1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gmac1_default
+		     &pinctrl_gmac1_mdio_default
+		     &pinctrl_gmac1_phy_irq>;
+	phy-mode = "rmii";
+	status = "okay"; /* Conflict with pdmc0. */
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+		interrupt-parent = <&pioA>;
+		interrupts = <PIN_PA21 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2s0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2s0_default>;
+};
+
+&pdmc0 {
+	#sound-dai-cells = <0>;
+	microchip,mic-pos = <MCHP_PDMC_DS0 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 1 */
+			    <MCHP_PDMC_DS1 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 2 */
+			    <MCHP_PDMC_DS0 MCHP_PDMC_CLK_POSITIVE>, /* MIC 3 */
+			    <MCHP_PDMC_DS1 MCHP_PDMC_CLK_POSITIVE>; /* MIC 4 */
+	status = "disabled"; /* Conflict with gmac1. */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdmc0_default>;
+};
+
+&pioA {
+
+	pinctrl_can0_default: can0_default {
+		pinmux = <PIN_PD12__CANTX0>,
+			 <PIN_PD13__CANRX0 >;
+		bias-disable;
+	};
+
+	pinctrl_can1_default: can1_default {
+		pinmux = <PIN_PD14__CANTX1>,
+			 <PIN_PD15__CANRX1 >;
+		bias-disable;
+	};
+
+	pinctrl_flx0_default: flx0_default {
+		pinmux = <PIN_PE3__FLEXCOM0_IO0>,
+			 <PIN_PE4__FLEXCOM0_IO1>,
+			 <PIN_PE6__FLEXCOM0_IO3>,
+			 <PIN_PE7__FLEXCOM0_IO4>;
+		bias-disable;
+	};
+
+	pinctrl_flx3_default: flx3_default {
+		pinmux = <PIN_PD16__FLEXCOM3_IO0>,
+			 <PIN_PD17__FLEXCOM3_IO1>;
+		bias-pull-up;
+	};
+
+	pinctrl_flx4_default: flx4_default {
+		pinmux = <PIN_PD18__FLEXCOM4_IO0>,
+			 <PIN_PD19__FLEXCOM4_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_flx7_default: flx7_default {
+		pinmux = <PIN_PC23__FLEXCOM7_IO0>,
+			 <PIN_PC24__FLEXCOM7_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_default: gmac0_default {
+		pinmux = <PIN_PA16__G0_TX0>,
+			 <PIN_PA17__G0_TX1>,
+			 <PIN_PA26__G0_TX2>,
+			 <PIN_PA27__G0_TX3>,
+			 <PIN_PA19__G0_RX0>,
+			 <PIN_PA20__G0_RX1>,
+			 <PIN_PA28__G0_RX2>,
+			 <PIN_PA29__G0_RX3>,
+			 <PIN_PA15__G0_TXEN>,
+			 <PIN_PA30__G0_RXCK>,
+			 <PIN_PA18__G0_RXDV>,
+			 <PIN_PA25__G0_125CK>;
+		slew-rate = <0>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_mdio_default: gmac0_mdio_default {
+		pinmux = <PIN_PA22__G0_MDC>,
+			 <PIN_PA23__G0_MDIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_txck_default: gmac0_txck_default {
+		pinmux = <PIN_PA24__G0_TXCK>;
+		slew-rate = <0>;
+		bias-pull-up;
+	};
+
+	pinctrl_gmac0_phy_irq: gmac0_phy_irq {
+		pinmux = <PIN_PA31__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac1_default: gmac1_default {
+		pinmux = <PIN_PD30__G1_TXCK>,
+			 <PIN_PD22__G1_TX0>,
+			 <PIN_PD23__G1_TX1>,
+			 <PIN_PD21__G1_TXEN>,
+			 <PIN_PD25__G1_RX0>,
+			 <PIN_PD26__G1_RX1>,
+			 <PIN_PD27__G1_RXER>,
+			 <PIN_PD24__G1_RXDV>;
+		slew-rate = <0>;
+		bias-disable;
+	};
+
+	pinctrl_gmac1_mdio_default: gmac1_mdio_default {
+		pinmux = <PIN_PD28__G1_MDC>,
+			 <PIN_PD29__G1_MDIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac1_phy_irq: gmac1_phy_irq {
+		pinmux = <PIN_PA21__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		pinmux = <PIN_PC9__FLEXCOM1_IO0>,
+			 <PIN_PC10__FLEXCOM1_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c8_default: i2c8_default {
+		pinmux = <PIN_PC14__FLEXCOM8_IO0>,
+			 <PIN_PC13__FLEXCOM8_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c9_default: i2c9_default {
+		pinmux = <PIN_PC18__FLEXCOM9_IO0>,
+			 <PIN_PC19__FLEXCOM9_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_i2s0_default: i2s0_default {
+		pinmux = <PIN_PB23__I2SMCC0_CK>,
+			 <PIN_PB24__I2SMCC0_WS>,
+			 <PIN_PB25__I2SMCC0_DOUT1>,
+			 <PIN_PB26__I2SMCC0_DOUT0>,
+			 <PIN_PB27__I2SMCC0_MCK>;
+		bias-disable;
+	};
+
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PA12__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led_gpio_default {
+		pinmux = <PIN_PA13__GPIO>,
+			 <PIN_PB8__GPIO>,
+			 <PIN_PD20__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_mikrobus1_an_default: mikrobus1_an_default {
+		pinmux = <PIN_PD0__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_an_default: mikrobus2_an_default {
+		pinmux = <PIN_PD1__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_pwm2_default: mikrobus1_pwm2_default {
+		pinmux = <PIN_PA13__PWMH2>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_pwm3_default: mikrobus2_pwm3_default {
+		pinmux = <PIN_PD20__PWMH3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
+		pinmux = <PIN_PB6__FLEXCOM11_IO3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi: mikrobus1_spi {
+		pinmux = <PIN_PB3__FLEXCOM11_IO0>,
+			 <PIN_PB4__FLEXCOM11_IO1>,
+			 <PIN_PB5__FLEXCOM11_IO2>;
+		bias-disable;
+	};
+
+	pinctrl_pdmc0_default: pdmc0_default {
+		pinmux = <PIN_PD23__PDMC0_DS0>,
+			 <PIN_PD24__PDMC0_DS1>,
+			 <PIN_PD22__PDMC0_CLK>;
+		bias_disable;
+	};
+
+	pinctrl_qspi: qspi {
+		pinmux = <PIN_PB12__QSPI0_IO0>,
+			 <PIN_PB11__QSPI0_IO1>,
+			 <PIN_PB10__QSPI0_IO2>,
+			 <PIN_PB9__QSPI0_IO3>,
+			 <PIN_PB16__QSPI0_IO4>,
+			 <PIN_PB17__QSPI0_IO5>,
+			 <PIN_PB18__QSPI0_IO6>,
+			 <PIN_PB19__QSPI0_IO7>,
+			 <PIN_PB13__QSPI0_CS>,
+			 <PIN_PB14__QSPI0_SCK>,
+			 <PIN_PB15__QSPI0_SCKN>,
+			 <PIN_PB20__QSPI0_DQS>,
+			 <PIN_PB21__QSPI0_INT>;
+		bias-disable;
+		slew-rate = <0>;
+		atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0_default {
+		cmd_data {
+			pinmux = <PIN_PA1__SDMMC0_CMD>,
+				 <PIN_PA3__SDMMC0_DAT0>,
+				 <PIN_PA4__SDMMC0_DAT1>,
+				 <PIN_PA5__SDMMC0_DAT2>,
+				 <PIN_PA6__SDMMC0_DAT3>,
+				 <PIN_PA7__SDMMC0_DAT4>,
+				 <PIN_PA8__SDMMC0_DAT5>,
+				 <PIN_PA9__SDMMC0_DAT6>,
+				 <PIN_PA10__SDMMC0_DAT7>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+
+		ck_cd_rstn_vddsel {
+			pinmux = <PIN_PA0__SDMMC0_CK>,
+				 <PIN_PA2__SDMMC0_RSTN>,
+				 <PIN_PA11__SDMMC0_DS>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1_default {
+		cmd_data {
+			pinmux = <PIN_PB29__SDMMC1_CMD>,
+				 <PIN_PB31__SDMMC1_DAT0>,
+				 <PIN_PC0__SDMMC1_DAT1>,
+				 <PIN_PC1__SDMMC1_DAT2>,
+				 <PIN_PC2__SDMMC1_DAT3>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+
+		ck_cd_rstn_vddsel {
+			pinmux = <PIN_PB30__SDMMC1_CK>,
+				 <PIN_PB28__SDMMC1_RSTN>,
+				 <PIN_PC5__SDMMC1_1V8SEL>,
+				 <PIN_PC4__SDMMC1_CD>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+	};
+
+	pinctrl_sdmmc2_default: sdmmc2_default {
+		cmd_data {
+			pinmux = <PIN_PD3__SDMMC2_CMD>,
+				 <PIN_PD5__SDMMC2_DAT0>,
+				 <PIN_PD6__SDMMC2_DAT1>,
+				 <PIN_PD7__SDMMC2_DAT2>,
+				 <PIN_PD8__SDMMC2_DAT3>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+
+		ck {
+			pinmux = <PIN_PD4__SDMMC2_CK>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+	};
+
+	pinctrl_spdifrx_default: spdifrx_default {
+		pinmux = <PIN_PB0__SPDIF_RX>;
+		bias-disable;
+	};
+
+	pinctrl_spdiftx_default: spdiftx_default {
+		pinmux = <PIN_PB1__SPDIF_TX>;
+		bias-disable;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_pwm2_default &pinctrl_mikrobus2_pwm3_default>;
+	status = "disabled"; /* Conflict with leds. */
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+&sdmmc0 {
+	bus-width = <8>;
+	non-removable;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vldo1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	no-1-8-v;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	bus-width = <4>;
+	no-1-8-v;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc2_default>;
+};
+
+&shdwc {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&spdifrx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdifrx_default>;
+	status = "okay";
+};
+
+&spdiftx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdiftx_default>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&vddout25 {
+	vin-supply = <&vdd_3v3>;
+	status = "okay";
+};
diff --git a/src/arm/microchip/at91-smartkiz.dts b/src/arm/microchip/at91-smartkiz.dts
new file mode 100644
index 0000000..b76a6b5
--- /dev/null
+++ b/src/arm/microchip/at91-smartkiz.dts
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017-2018 Overkiz SAS
+ *   Author: Mickael Gardet <m.gardet@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ *           Dorian Rocipon <d.rocipon@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz SmartKiz";
+	compatible = "overkiz,smartkiz", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+
+	clocks {
+		adc_op_clk {
+			status = "okay";
+		};
+	};
+
+	aliases {
+		serial5 = &uart0;
+	};
+
+	pio_keys {
+		hk_reset {
+			label = "HK_RESET";
+			gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_rf {
+			label = "POWER_RF";
+			gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_wifi {
+			label = "POWER_WIFI";
+			gpios = <&pioA 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	i2c1 {
+		pinctrl_i2c1: i2c1-0 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	adc0 {
+		pinctrl_adc0_ad0: adc0_ad0-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_adc0_ad5: adc0_ad5-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_adc0_ad6: adc0_ad6-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_adc0_ad11: adc0_ad11-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 10 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "disabled";
+};
+
+&macb0 {
+	status = "disabled";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&led_blue {
+	status = "okay";
+};
+
+&adc0 {
+	atmel,adc-vref = <2500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_adc0_ad0
+		&pinctrl_adc0_ad5
+		&pinctrl_adc0_ad6
+		&pinctrl_adc0_ad11
+	>;
+	atmel,adc-channels-used = <0x0861>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
diff --git a/src/arm/microchip/at91-som60.dtsi b/src/arm/microchip/at91-som60.dtsi
new file mode 100644
index 0000000..39474a1
--- /dev/null
+++ b/src/arm/microchip/at91-som60.dtsi
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-som60.dtsi - Device Tree file for the SOM60 module
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+#include "sama5d36.dtsi"
+
+/ {
+	model = "Laird SOM60";
+	compatible = "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = &dbgu;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_mmc0_cd: mmc0_cd {
+			atmel,pins =
+				<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_mmc0_en: mmc0_en {
+			atmel,pins =
+				<AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_nand0_wp: nand0_wp {
+			atmel,pins =
+				<AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_usb_vbus: usb_vbus {
+			atmel,pins =
+				<AT91_PIOE 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+				/* Conflicts with USART2_SCK */
+		};
+
+		pinctrl_usart2_sck: usart2_sck {
+			atmel,pins =
+				<AT91_PIOE 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+				/* Conflicts with USB_VBUS */
+		};
+
+		pinctrl_usb_oc: usb_oc {
+			atmel,pins =
+				<AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+				/* Conflicts with USART3_SCK */
+		};
+
+		pinctrl_usart3_sck: usart3_sck {
+			atmel,pins =
+				<AT91_PIOE 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+				/* Conflicts with USB_OC */
+		};
+
+		pinctrl_usba_vbus: usba_vbus {
+		   atmel,pins =
+				<AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_geth_int: geth_int {
+			atmel,pins =
+				<AT91_PIOB 25 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+				/* Conflicts with USART1_SCK */
+		};
+
+		pinctrl_usart1_sck: usart1_sck {
+			atmel,pins =
+				<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+				/* Conflicts with GETH_INT */
+		};
+
+		pinctrl_eth_int: eth_int {
+			atmel,pins =
+				<AT91_PIOC 10 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_pck2_as_audio_mck: pck2_as_audio_mck {
+			atmel,pins =
+				<AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&mmc0 {
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&spi0 {
+	cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+};
+
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
+};
+
+&usart1 {
+	pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+};
+
+&usart2 {
+	pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts_cts>;
+};
+
+&usart3 {
+	pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>;
+};
+
+&adc0 {
+	pinctrl-0 = <
+		&pinctrl_adc0_adtrg
+		&pinctrl_adc0_ad0
+		&pinctrl_adc0_ad1
+		&pinctrl_adc0_ad2
+		&pinctrl_adc0_ad3
+		&pinctrl_adc0_ad4
+		&pinctrl_adc0_ad5
+		>;
+};
+
+&macb0 {
+	phy-mode = "rgmii";
+};
+
+&macb1 {
+	phy-mode = "rmii";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand: nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ubootspl@0 {
+				label = "u-boot-spl";
+				reg = <0x0 0x20000>;
+			};
+
+			uboot@20000 {
+				label = "u-boot";
+				reg = <0x20000 0x80000>;
+			};
+
+			ubootenv@a0000 {
+				label = "u-boot-env";
+				reg = <0xa0000 0x20000>;
+			};
+
+			ubootenv@c0000 {
+				label = "u-boot-env";
+				reg = <0xc0000 0x20000>;
+			};
+
+			ubi@e0000 {
+				label = "ubi";
+				reg = <0xe0000 0xfe00000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	atmel,vbus-gpio = <&pioC 14 GPIO_ACTIVE_HIGH>;
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_vbus &pinctrl_usb_oc>;
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+		&pioE 20 GPIO_ACTIVE_HIGH
+		0>;
+	atmel,oc-gpio = <0
+		&pioE 15 GPIO_ACTIVE_LOW
+		0>;
+};
diff --git a/src/arm/microchip/at91-tse850-3.dts b/src/arm/microchip/at91-tse850-3.dts
new file mode 100644
index 0000000..9d58a39
--- /dev/null
+++ b/src/arm/microchip/at91-tse850-3.dts
@@ -0,0 +1,362 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-tse850-3.dts - Device Tree file for the Axentia TSE-850 3.0 board
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ */
+/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
+#include "at91-linea.dtsi"
+
+/ {
+	model = "Axentia TSE-850 3.0";
+	compatible = "axentia,tse850v3", "axentia,linea",
+		     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	sck: oscillator {
+		compatible = "fixed-clock";
+
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+		clock-output-names = "sck";
+	};
+
+	reg_3v3: regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "3v3-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	ana: reg-ana {
+		compatible = "pwm-regulator";
+
+		regulator-name = "ANA";
+
+		pwms = <&pwm0 2 1000 PWM_POLARITY_INVERTED>;
+		pwm-dutycycle-unit = <1000>;
+		pwm-dutycycle-range = <100 1000>;
+
+		regulator-min-microvolt = <2000000>;
+		regulator-max-microvolt = <20000000>;
+		regulator-ramp-delay = <1000>;
+	};
+
+	sound {
+		compatible = "axentia,tse850-pcm5142";
+
+		axentia,cpu-dai = <&ssc0>;
+		axentia,audio-codec = <&pcm5142>;
+
+		axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>;
+		axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+		axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>;
+
+		axentia,ana-supply = <&ana>;
+	};
+
+	dac: dpot-dac {
+		compatible = "dpot-dac";
+		vref-supply = <&reg_3v3>;
+		io-channels = <&dpot 0>;
+		io-channel-names = "dpot";
+		#io-channel-cells = <1>;
+	};
+
+	env_det: envelope-detector {
+		compatible = "axentia,tse850-envelope-detector";
+		io-channels = <&dac 0>;
+		io-channel-names = "dac";
+		#io-channel-cells = <1>;
+
+		interrupt-parent = <&pioA>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "comp";
+	};
+
+	mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+			    <&pioA 1 GPIO_ACTIVE_HIGH>,
+			    <&pioA 2 GPIO_ACTIVE_HIGH>;
+		idle-state = <0>;
+	};
+
+	envelope-detector-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&env_det 0>;
+		io-channel-names = "parent";
+
+		mux-controls = <&mux>;
+
+		channels = "", "",
+			 "sync-1",
+			 "in",
+			 "out",
+			 "sync-2",
+			 "sys-reg",
+			 "ana-reg";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-ch1-red {
+			label = "ch-1:red";
+			gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+		};
+		led-ch1-green {
+			label = "ch-1:green";
+			gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
+		};
+		led-ch2-red {
+			label = "ch-2:red";
+			gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
+		};
+		led-ch2-green {
+			label = "ch-2:green";
+			gpios = <&pioA 20 GPIO_ACTIVE_LOW>;
+		};
+		led-data-red {
+			label = "data:red";
+			gpios = <&pioA 19 GPIO_ACTIVE_LOW>;
+		};
+		led-data-green {
+			label = "data:green";
+			gpios = <&pioA 18 GPIO_ACTIVE_LOW>;
+		};
+		led-alarm-red {
+			label = "alarm:red";
+			gpios = <&pioA 17 GPIO_ACTIVE_LOW>;
+		};
+		led-alarm-green {
+			label = "alarm:green";
+			gpios = <&pioA 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&nand {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		at91bootstrap@0 {
+			label = "at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		barebox@40000 {
+			label = "bootloader";
+			reg = <0x40000 0x60000>;
+		};
+
+		bareboxenv@c0000 {
+			label = "bareboxenv";
+			reg = <0xc0000 0x40000>;
+		};
+
+		bareboxenv2@100000 {
+			label = "bareboxenv2";
+			reg = <0x100000 0x40000>;
+		};
+
+		oftree@180000 {
+			label = "oftree";
+			reg = <0x180000 0x20000>;
+		};
+
+		kernel@200000 {
+			label = "kernel";
+			reg = <0x200000 0x500000>;
+		};
+
+		rootfs@800000 {
+			label = "rootfs";
+			reg = <0x800000 0x0f800000>;
+		};
+
+		ovlfs@10000000 {
+			label = "ovlfs";
+			reg = <0x10000000 0x10000000>;
+		};
+	};
+};
+
+&ssc0 {
+	#sound-dai-cells = <0>;
+
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	jc42@18 {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x18>;
+		smbus-timeout-disable;
+	};
+
+	dpot: mcp4651-104@28 {
+		compatible = "microchip,mcp4651-104";
+		reg = <0x28>;
+		#io-channel-cells = <1>;
+	};
+
+	pcm5142: pcm5142@4c {
+		compatible = "ti,pcm5142";
+
+		reg = <0x4c>;
+		#sound-dai-cells = <0>;
+
+		AVDD-supply = <&reg_3v3>;
+		DVDD-supply = <&reg_3v3>;
+		CPVDD-supply = <&reg_3v3>;
+
+		clocks = <&sck>;
+
+		pll-in = <3>;
+		pll-out = <6>;
+	};
+
+	eeprom@50 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&pinctrl {
+	tse850 {
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins = <AT91_PIOC 31 AT91_PERIPH_GPIO
+				      AT91_PINCTRL_DEGLITCH>;
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&usart0 {
+	status = "okay";
+
+	atmel,use-dma-rx;
+};
+
+&pwm0 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_pwm0_pwml2_1>;
+	pinctrl-names = "default";
+};
+
+&macb1 {
+	status = "okay";
+
+	phy-mode = "rmii";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	phy0: ethernet-phy@3 {
+		reg = <3>;
+
+		interrupt-parent = <&pioE>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	atmel,vbus-gpio = <&pioC 31 GPIO_ACTIVE_HIGH>;
+};
+
+&usb1 {
+	status = "okay";
+
+	num-ports = <1>;
+	atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
+	atmel,oc-gpio = <&pioC 15 GPIO_ACTIVE_LOW>;
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+
+	dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+};
+
+&pioA {
+	gpio-line-names =
+	/*  0 */	"SUP-A", "SUP-B", "SUP-C", "SIG<LEV",
+	/*  4 */	"", "/RFRST", "", "",
+	/*  8 */	"/ADD", "", "/LOOP1", "/LOOP2",
+	/* 12 */	"", "", "", "",
+	/* 16 */	"LED1GREEN", "LED1RED", "LED2GREEN", "LED2RED",
+	/* 20 */	"LED3GREEN", "LED3RED", "LED4GREEN", "LED4RED",
+	/* 24 */	"", "", "", "",
+	/* 28 */	"", "", "SDA", "SCL";
+};
+
+&pioB {
+	gpio-line-names =
+	/*  0 */	"", "", "", "",
+	/*  4 */	"", "", "", "",
+	/*  8 */	"", "", "", "",
+	/* 12 */	"", "", "", "",
+	/* 16 */	"", "", "", "",
+	/* 20 */	"", "", "", "",
+	/* 24 */	"", "", "SIG<LIN", "SIG>LIN",
+	/* 28 */	"RXD", "TXD", "BRX", "BTX";
+};
+
+&pioC {
+	gpio-line-names =
+	/*  0 */	"ETX0", "ETX1", "ERX0", "ERX1",
+	/*  4 */	"ETXEN", "ECRSDV", "ERXER", "EREFCK",
+	/*  8 */	"EMDC", "EMDIO", "", "",
+	/* 12 */	"", "", "", "/ILIM",
+	/* 16 */	"BCK", "LRCK", "DIN", "",
+	/* 20 */	"", "", "", "",
+	/* 24 */	"", "", "", "",
+	/* 28 */	"", "", "", "VBUS";
+};
+
+&pioD {
+	gpio-line-names =
+	/*  0 */	"I1", "I2", "O1", "EXTVEN",
+	/*  4 */	"", "456KHZ", "VCTRL", "SYNCSEL",
+	/*  8 */	"STEREO", "", "", "",
+	/* 12 */	"", "", "", "",
+	/* 16 */	"", ">LIN", "LIN>", "",
+	/* 20 */	"VREFEN", "", "", "",
+	/* 24 */	"", "", "VINOK", "",
+	/* 28 */	"POEOK", "USBON", "POELOAD", "";
+};
+
+&pioE {
+	gpio-line-names =
+	/*  0 */	"", "", "", "",
+	/*  4 */	"", "", "", "",
+	/*  8 */	"", "", "", "",
+	/* 12 */	"", "", "", "",
+	/* 16 */	"", "", "", "",
+	/* 20 */	"", "ALE", "CLE", "",
+	/* 24 */	"", "", "", "",
+	/* 28 */	"", "", "", "/ETHINT";
+};
diff --git a/src/arm/microchip/at91-vinco.dts b/src/arm/microchip/at91-vinco.dts
new file mode 100644
index 0000000..ecbdacf
--- /dev/null
+++ b/src/arm/microchip/at91-vinco.dts
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for VInCo platform
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *   2015 Gregory CLEMENT <gregory.clement@free-electrons.com>
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+
+/ {
+	model = "L+G VInCo platform";
+	compatible = "l+g,vinco", "atmel,sama5d4", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+
+			adc0: adc@fc034000 {
+				status = "okay"; /* Enable ADC IIO support */
+			};
+
+			mmc0: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0
+					     &pinctrl_mmc0_dat1_3
+					     &pinctrl_mmc0_dat4_7>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				vmmc-supply = <&vcc_3v3_reg>;
+				no-1-8-v;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <8>;
+					non-removable;
+					broken-cd;
+					status = "okay";
+				};
+			};
+
+			spi0: spi@f8010000 {
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+				flash@0 {
+					compatible = "n25q32b", "jedec,spi-nor";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f8018000 {
+				status = "okay";
+				/* kerkey security module */
+			};
+
+			macb0: ethernet@f8020000 {
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					reset-gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
+					interrupt-parent = <&pioB>;
+					interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+				};
+
+			};
+
+			i2c2: i2c@f8024000 {
+				status = "okay";
+
+				rtc1: rtc@32 {
+					compatible = "epson,rx8900";
+					reg = <0x32>;
+				};
+			};
+
+			usart2: serial@fc008000 {
+				/* MBUS */
+				status = "okay";
+			};
+
+			usart3: serial@fc00c000 {
+				/* debug */
+				status = "okay";
+			};
+
+			usart4: serial@fc010000 {
+				/* LMN */
+				pinctrl-0 = <&pinctrl_usart4 &pinctrl_usart4_rts>;
+				linux,rs485-enabled-at-boot-time;
+				status = "okay";
+			};
+
+			tcb2: timer@fc024000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			macb1: ethernet@fc028000 {
+				phy-mode = "rmii";
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioB>;
+					interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+					reset-gpios = <&pioE 6 GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+
+			pinctrl@fc06a000 {
+				board {
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+						<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+				};
+			};
+		};
+
+		usb0: gadget@400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "disabled";
+		};
+
+		usb1: ohci@500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 11 GPIO_ACTIVE_LOW
+					   &pioE 12 GPIO_ACTIVE_LOW
+					  >;
+			status = "disabled";
+		};
+
+		usb2: ehci@600000 {
+			/* 4G Modem */
+			status = "okay";
+		};
+
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led_err {
+			label = "err";
+			gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_rssi {
+			label = "rssi";
+			gpios = <&pioA 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_tls {
+			label = "tls";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_lmc {
+			label = "lmc";
+			gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_wmt {
+			label = "wmt";
+			gpios = <&pioA 29 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_pwr {
+			label = "pwr";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+	};
+
+	vcc_3v3_reg: fixedregulator_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
diff --git a/src/arm/microchip/at91-wb45n.dts b/src/arm/microchip/at91-wb45n.dts
new file mode 100644
index 0000000..ef73f72
--- /dev/null
+++ b/src/arm/microchip/at91-wb45n.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb45n.dts - Device Tree file for WB45NBT board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+/dts-v1/;
+#include "at91-wb45n.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
+	compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button {
+			label = "IRQBTN";
+			linux,code = <99>;
+			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&macb0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&usart0 {
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
diff --git a/src/arm/microchip/at91-wb45n.dtsi b/src/arm/microchip/at91-wb45n.dtsi
new file mode 100644
index 0000000..430c753
--- /dev/null
+++ b/src/arm/microchip/at91-wb45n.dtsi
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb45n.dtsi - Device Tree file for WB45NBT board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+
+#include "at91sam9g25.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
+	compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	atheros {
+		compatible = "atheros,ath6kl";
+		atheros,board-id = "SD32";
+	};
+};
+
+&reset_controller {
+	compatible = "atmel,sama5d3-rstc";
+};
+
+&shutdown_controller {
+	atmel,wakeup-mode = "low";
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&ebi {
+	status = "okay";
+	nand_controller: nand-controller {
+		pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb &pinctrl_nand_oe_we>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <4>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bs";
+					reg = <0x0 0x20000>;
+				};
+
+				uboot@20000 {
+					label = "u-boot";
+					reg = <0x20000 0x80000>;
+				};
+
+				ubootenv@a0000 {
+					label = "u-boot-env";
+					reg = <0xa0000 0x20000>;
+				};
+
+				ubootenv@c0000 {
+					label = "redund-env";
+					reg = <0xc0000 0x20000>;
+				};
+
+				kernel-a@e0000 {
+					label = "kernel-a";
+					reg = <0xe0000 0x280000>;
+				};
+
+				kernel-b@360000 {
+					label = "kernel-b";
+					reg = <0x360000 0x280000>;
+				};
+
+				rootfs-a@5e0000 {
+					label = "rootfs-a";
+					reg = <0x5e0000 0x2600000>;
+				};
+
+				rootfs-b@2be0000 {
+					label = "rootfs-b";
+					reg = <0x2be0000 0x2600000>;
+				};
+
+				user@51e0000 {
+					label = "user";
+					reg = <0x51e0000 0x2dc0000>;
+				};
+
+				logs@7fa0000 {
+					label = "logs";
+					reg = <0x7fa0000 0x60000>;
+				};
+
+			};
+		};
+	};
+};
+
+&usb0 {
+	num-ports = <2>;
+	atmel,vbus-gpio = <
+		&pioB 12 GPIO_ACTIVE_HIGH
+		&pioA 31 GPIO_ACTIVE_HIGH
+		>;
+	atmel,oc-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
+};
+
+&macb0 {
+	phy-mode = "rmii";
+};
+
+&spi0 {
+	cs-gpios = <&pioA 14 0>, <&pioA 7 0>, <0>, <0>;
+};
+
+&usb2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_board_usb2>;
+	atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&pinctrl {
+	usb2 {
+		pinctrl_board_usb2: usb2-board {
+			atmel,pins =
+				<AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB11 gpio vbus sense, deglitch */
+		};
+	};
+};
+
diff --git a/src/arm/microchip/at91-wb50n.dts b/src/arm/microchip/at91-wb50n.dts
new file mode 100644
index 0000000..ec2becf
--- /dev/null
+++ b/src/arm/microchip/at91-wb50n.dts
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb50n.dts - Device Tree file for wb50n evaluation board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+
+/dts-v1/;
+#include "at91-wb50n.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
+	compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			label = "BTNESC";
+			linux,code = <1>; /* ESC button */
+			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-1 {
+			label = "IRQBTN";
+			linux,code = <99>; /* SysReq button */
+			gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "wb50n:blue:led0";
+			gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led1 {
+			label = "wb50n:green:led1";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "wb50n:red:led2";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&macb1 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+/* On BB40 this port is labeled UART1 */
+&usart0 {
+	status = "okay";
+};
+
+/* On BB40 this port is labeled UART0 */
+&usart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
diff --git a/src/arm/microchip/at91-wb50n.dtsi b/src/arm/microchip/at91-wb50n.dtsi
new file mode 100644
index 0000000..74b249b
--- /dev/null
+++ b/src/arm/microchip/at91-wb50n.dtsi
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb50n.dtsi - Device Tree include file for wb50n cpu module
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+
+#include "sama5d31.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
+	compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_mmc0_cd: mmc0_cd {
+			atmel,pins = <AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC26 GPIO with pullup deglitch */
+		};
+
+		pinctrl_usba_vbus: usba_vbus {
+			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB13 GPIO with deglitch */
+		};
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&clk32k {
+	atmel,osc-bypass;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+	cd-gpios = <&pioC 26 GPIO_ACTIVE_LOW>;
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+	status = "okay";
+	atheros@0 {
+		compatible = "atheros,ath6kl";
+		atheros,board-id = "SD32";
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&macb1 {
+	phy-mode = "rmii";
+};
+
+&dbgu {
+	dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+};
+
+/* On BB40 this port is labeled UART1 */
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
+};
+
+/* On BB40 this port is labeled UART0 */
+&usart1 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+	dtr-gpios = <&pioD 13 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&pioD 11 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&pioD 7 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&pioD 8 GPIO_ACTIVE_LOW>;
+};
+
+/* USART3 is direct-connect to the Bluetooth UART on the radio SIP */
+&usart3 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>;
+	status = "okay";
+};
+
+&spi1 {
+	cs-gpios = <&pioC 25 0>, <0>, <0>, <0>;
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand: nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			at91bootstrap@0 {
+				label = "at91bs";
+				reg = <0x0 0x20000>;
+			};
+
+			uboot@20000 {
+				label = "u-boot";
+				reg = <0x20000 0x80000>;
+			};
+
+			ubootenv@a0000 {
+				label = "u-boot-env";
+				reg = <0xa0000 0x20000>;
+			};
+
+			ubootenv@c0000 {
+				label = "u-boot-env";
+				reg = <0xc0000 0x20000>;
+			};
+
+			kernel-a@e0000 {
+				label = "kernel-a";
+				reg = <0xe0000 0x500000>;
+			};
+
+			kernel-b@5e0000 {
+				label = "kernel-b";
+				reg = <0x5e0000 0x500000>;
+			};
+
+			rootfs-a@ae0000 {
+				label = "rootfs-a";
+				reg = <0xae0000 0x3000000>;
+			};
+
+			rootfs-b@3ae0000 {
+				label = "rootfs-b";
+				reg = <0x3ae0000 0x3000000>;
+			};
+
+			user@6ae0000 {
+				label = "user";
+				reg = <0x6ae0000 0x14e0000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <&pioA 2 GPIO_ACTIVE_LOW>;
+	atmel,oc-gpio = <&pioA 4 GPIO_ACTIVE_LOW>;
+};
diff --git a/src/arm/microchip/at91rm9200.dtsi b/src/arm/microchip/at91rm9200.dtsi
new file mode 100644
index 0000000..16c675e
--- /dev/null
+++ b/src/arm/microchip/at91rm9200.dtsi
@@ -0,0 +1,729 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91rm9200.dtsi - Device Tree Include file for AT91RM9200 family SoC
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
+ *                2012 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Based on at91sam9260.dtsi
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91RM9200 family SoC";
+	compatible = "atmel,at91rm9200";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		ssc2 = &ssc2;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm920t";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x04000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	sram: sram@200000 {
+		compatible = "mmio-sram";
+		reg = <0x00200000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00200000 0x4000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <25 26 27 28 29 30 31>;
+			};
+
+			ramc0: ramc@ffffff00 {
+				compatible = "atmel,at91rm9200-sdramc", "syscon";
+				reg = <0xffffff00 0x100>;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91rm9200-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&slow_xtal>, <&main_xtal>;
+				clock-names = "slow_xtal", "main_xtal";
+			};
+
+			st: timer@fffffd00 {
+				compatible = "atmel,at91rm9200-st", "syscon", "simple-mfd";
+				reg = <0xfffffd00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+
+				watchdog {
+					compatible = "atmel,at91rm9200-wdt";
+				};
+			};
+
+			rtc: rtc@fffffe00 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffe00 0x40>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				status = "disabled";
+			};
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffa0000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			tcb1: timer@fffa4000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffa4000 0x100>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <21 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <22 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&slow_xtal>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			i2c0: i2c@fffb8000 {
+				compatible = "atmel,at91rm9200-i2c";
+				reg = <0xfffb8000 0x4000>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_twi>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			mmc0: mmc@fffb4000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffb4000 0x4000>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				clock-names = "mci_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffd0000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffd0000 0x4000>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fffd4000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffd4000 0x4000>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc2: ssc@fffd8000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffd8000 0x4000>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			macb0: ethernet@fffbc000 {
+				compatible = "cdns,at91rm9200-emac", "cdns,emac";
+				reg = <0xfffbc000 0x4000>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+				phy-mode = "rmii";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb_rmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "ether_clk";
+				status = "disabled";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				atmel,mux-mask = <
+					/*    A         B     */
+					 0xffffffff 0xffffffff  /* pioA */
+					 0xffffffff 0x083fffff  /* pioB */
+					 0xffff3fff 0x00000000  /* pioC */
+					 0x03ff87ff 0x0fffff80  /* pioD */
+					>;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_uart0_cts: uart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA20 periph A */
+					};
+
+					pinctrl_uart0_rts: uart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA21 periph A */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_uart1_rts: uart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB24 periph A */
+					};
+
+					pinctrl_uart1_cts: uart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB26 periph A */
+					};
+
+					pinctrl_uart1_dtr_dsr: uart1_dtr_dsr-0 {
+						atmel,pins =
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB19 periph A */
+							 AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB25 periph A */
+					};
+
+					pinctrl_uart1_dcd: uart1_dcd-0 {
+						atmel,pins =
+							<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB23 periph A */
+					};
+
+					pinctrl_uart1_ri: uart1_ri-0 {
+						atmel,pins =
+							<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A */
+					};
+				};
+
+				uart2 {
+					pinctrl_uart2: uart2-0 {
+						atmel,pins =
+							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_uart2_rts: uart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA30 periph B */
+					};
+
+					pinctrl_uart2_cts: uart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA31 periph B */
+					};
+				};
+
+				uart3 {
+					pinctrl_uart3: uart3-0 {
+						atmel,pins =
+							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_uart3_rts: uart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
+					};
+
+					pinctrl_uart3_cts: uart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP	/* PC2 gpio RDY pin pull_up */
+							 AT91_PIOB 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PB1 gpio CD pin pull_up */
+					};
+				};
+
+				macb {
+					pinctrl_macb_rmii: macb_rmii-0 {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA7 periph A */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA8 periph A */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA9 periph A */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA10 periph A */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA16 periph A */
+					};
+
+					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB12 periph B */
+							 AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB13 periph B */
+							 AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB14 periph B */
+							 AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB15 periph B */
+							 AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB16 periph B */
+							 AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB17 periph B */
+							 AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB18 periph B */
+							 AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB19 periph B */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA27 periph A */
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA28 periph A with pullup */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA29 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PB3 periph B with pullup */
+							 AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PB4 periph B with pullup */
+							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PB5 periph B with pullup */
+					};
+
+					pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA8 periph B with pullup */
+							 AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA9 periph B with pullup */
+					};
+
+					pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA10 periph B with pullup */
+							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA11 periph B with pullup */
+							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA12 periph B with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB2 periph A */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB5 periph A */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+							 AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB8 periph A */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB10 periph A */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB11 periph A */
+					};
+				};
+
+				ssc2 {
+					pinctrl_ssc2_tx: ssc2_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB14 periph A */
+					};
+
+					pinctrl_ssc2_rx: ssc2_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB17 periph A */
+					};
+				};
+
+				twi {
+					pinctrl_twi: twi-0 {
+						atmel,pins =
+							<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE	/* PA25 periph A with multi drive */
+							 AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>;	/* PA26 periph A with multi drive */
+					};
+
+					pinctrl_twi_gpio: twi_gpio-0 {
+						atmel,pins =
+							<AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PA25 GPIO with multi drive */
+							 AT91_PIOA 26 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PA26 GPIO with multi drive */
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A SPI0_MISO pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA1 periph A SPI0_MOSI pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A SPI0_SPCK pin */
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart";
+				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart0: serial@fffc0000 {
+				compatible = "atmel,at91rm9200-usart";
+				reg = <0xfffc0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fffc4000 {
+				compatible = "atmel,at91rm9200-usart";
+				reg = <0xfffc4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fffc8000 {
+				compatible = "atmel,at91rm9200-usart";
+				reg = <0xfffc8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fffcc000 {
+				compatible = "atmel,at91rm9200-usart";
+				reg = <0xfffcc000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usb1: gadget@fffb0000 {
+				compatible = "atmel,at91rm9200-udc";
+				reg = <0xfffb0000 0x4000>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 1>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+
+			spi0: spi@fffe0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffe0000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x10000000>;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			nand-ecc-mode = "soft";
+			gpios = <&pioC 2 GPIO_ACTIVE_HIGH
+				 0
+				 &pioB 1 GPIO_ACTIVE_HIGH
+				>;
+			status = "disabled";
+		};
+
+		usb0: ohci@300000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00300000 0x100000>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_SYSTEM 4>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 26 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_twi_gpio>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/src/arm/microchip/at91rm9200_pqfp.dtsi b/src/arm/microchip/at91rm9200_pqfp.dtsi
new file mode 100644
index 0000000..c3d4177
--- /dev/null
+++ b/src/arm/microchip/at91rm9200_pqfp.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91rm9200_pqfp.dtsi - Device Tree Include file for AT91RM9200 PQFP family SoC
+ *
+ * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91rm9200.dtsi"
+
+/ {
+	compatible = "atmel,at91rm9200-pqfp", "atmel,at91rm9200";
+};
+
+&pioD {
+	status = "disabled";
+};
diff --git a/src/arm/microchip/at91rm9200ek.dts b/src/arm/microchip/at91rm9200ek.dts
new file mode 100644
index 0000000..4624a6f0
--- /dev/null
+++ b/src/arm/microchip/at91rm9200ek.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91rm9200ek.dts - Device Tree file for Atmel AT91RM9200 evaluation kit
+ *
+ *  Copyright (C) 2012 Joachim Eastwood <manabian@gmail.com>
+ */
+/dts-v1/;
+#include "at91rm9200.dtsi"
+
+/ {
+	model = "Atmel AT91RM9200 evaluation kit";
+	compatible = "atmel,at91rm9200ek", "atmel,at91rm9200";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usb1: gadget@fffb0000 {
+				atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
+				atmel,pullup-gpio = <&pioD 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+
+				phy0: ethernet-phy {
+					interrupt-parent = <&pioC>;
+					interrupts = <4 IRQ_TYPE_EDGE_BOTH>;
+				};
+			};
+
+			usart1: serial@fffc4000 {
+				pinctrl-0 =
+						<&pinctrl_uart1
+						 &pinctrl_uart1_rts
+						 &pinctrl_uart1_cts
+						 &pinctrl_uart1_dtr_dsr
+						 &pinctrl_uart1_dcd
+						 &pinctrl_uart1_ri>;
+				status = "okay";
+			};
+
+			spi0: spi@fffe0000 {
+				status = "okay";
+				cs-gpios = <&pioA 3 0>, <0>, <0>, <0>;
+				flash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <15000000>;
+					reg = <0>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			rtc: rtc@fffffe00 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@300000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+
+		flash@10000000 {
+			compatible = "cfi-flash";
+			reg = <0x10000000 0x800000>;
+			linux,mtd-name = "physmap-flash.0";
+			bank-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			barebox@0 {
+				label = "barebox";
+				reg = <0x00000 0x40000>;
+			};
+
+			bareboxenv@40000 {
+				label = "bareboxenv";
+				reg = <0x40000 0x10000>;
+			};
+
+			kernel@50000 {
+				label = "kernel";
+				reg = <0x50000 0x300000>;
+			};
+
+			root@350000  {
+				label = "root";
+				reg = <0x350000 0x4B0000>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds2 {
+			label = "green";
+			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+		};
+
+		ds4 {
+			label = "yellow";
+			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds6 {
+			label = "red";
+			gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/src/arm/microchip/at91sam9260.dtsi b/src/arm/microchip/at91sam9260.dtsi
new file mode 100644
index 0000000..e56d554
--- /dev/null
+++ b/src/arm/microchip/at91sam9260.dtsi
@@ -0,0 +1,796 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
+ *                2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9260 family SoC";
+	compatible = "atmel,at91sam9260";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		serial5 = &uart0;
+		serial6 = &uart1;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		ssc0 = &ssc0;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x04000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <5000000>;
+		};
+	};
+
+	sram0: sram@2ff000 {
+		compatible = "mmio-sram";
+		reg = <0x002ff000 0x2000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x002ff000 0x2000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <29 30 31>;
+			};
+
+			ramc0: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			smc: smc@ffffec00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffec00 0x200>;
+			};
+
+			matrix: matrix@ffffee00 {
+				compatible = "atmel,at91sam9260-matrix", "syscon";
+				reg = <0xffffee00 0x200>;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9260-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&slow_xtal>, <&main_xtal>;
+				clock-names = "slow_xtal", "main_xtal";
+			};
+
+			reset-controller@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
+			};
+
+			shdwc: poweroff@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffa0000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&pmc PMC_TYPE_CORE PMC_SLOW>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			tcb1: timer@fffdc000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffdc000 0x100>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <27 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <28 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 28>, <&pmc PMC_TYPE_CORE PMC_SLOW>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			pinctrl: pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x600>;
+
+				atmel,mux-mask = <
+				      /*    A         B     */
+				       0xffffffff 0xffc00c3b  /* pioA */
+				       0xffffffff 0x7fff3ccf  /* pioB */
+				       0xffffffff 0x007fffff  /* pioC */
+				      >;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB26 periph A */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB27 periph A */
+					};
+
+					pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB24 periph A */
+							 AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB22 periph A */
+					};
+
+					pinctrl_usart0_dcd: usart0_dcd-0 {
+						atmel,pins =
+							<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB23 periph A */
+					};
+
+					pinctrl_usart0_ri: usart0_ri-0 {
+						atmel,pins =
+							<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB25 periph A */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB28 periph A */
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB29 periph A */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA4 periph A */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA5 periph A */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOC 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							 <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				macb {
+					pinctrl_macb_rmii: macb_rmii-0 {
+						atmel,pins =
+							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA16 periph A */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA18 periph A */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA19 periph A */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA20 periph A */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA21 periph A */
+					};
+
+					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+						atmel,pins =
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B */
+							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA23 periph B */
+							 AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA24 periph B */
+							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
+							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA26 periph B */
+							 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
+					};
+
+					pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA10 periph B */
+							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA11 periph B */
+							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B */
+							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
+							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA26 periph B */
+							 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA8 periph A */
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA7 periph A with pullup */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA6 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA9 periph A with pullup */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA10 periph A with pullup */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA11 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA1 periph B with pullup */
+							 AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA0 periph B with pullup */
+					};
+
+					pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA5 periph B with pullup */
+							 AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA4 periph B with pullup */
+							 AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA3 periph B with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A */
+							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB19 periph A */
+							 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB20 periph A */
+							 AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB21 periph A */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A SPI0_MISO pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA1 periph A SPI0_MOSI pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A SPI1_MISO pin */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A SPI1_MOSI pin */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB2 periph A SPI1_SPCK pin */
+					};
+				};
+
+				i2c_gpio0 {
+					pinctrl_i2c_gpio0: i2c_gpio0-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE
+							 AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart0: serial@fffb0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fffb4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fffb8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fffd0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffd0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart0: serial@fffd4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffd4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart1: serial@fffd8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffd8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			macb0: ethernet@fffc4000 {
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xfffc4000 0x100>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb_rmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 21>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			usb1: gadget@fffa4000 {
+				compatible = "atmel,at91sam9260-udc";
+				reg = <0xfffa4000 0x4000>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>, <&pmc PMC_TYPE_SYSTEM 7>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@fffac000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfffac000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				status = "disabled";
+			};
+
+			mmc0: mmc@fffa8000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffa8000 0x600>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffbc000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffbc000 0x4000>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			spi0: spi@fffc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffc8000 0x200>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@fffcc000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffcc000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			adc0: adc@fffe0000 {
+				compatible = "atmel,at91sam9260-adc";
+				reg = <0xfffe0000 0x100>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-use-external-triggers;
+				atmel,adc-channels-used = <0xf>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-startup-time = <15>;
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
+				status = "disabled";
+			};
+
+			watchdog: watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd50 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd50 0x10>;
+				status = "disabled";
+			};
+		};
+
+		usb0: ohci@500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9260-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x80000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000
+				  0x6 0x0 0x70000000 0x10000000
+				  0x7 0x0 0x80000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9260-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c_gpio0: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 24 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio0>;
+		status = "disabled";
+	};
+};
diff --git a/src/arm/microchip/at91sam9260ek.dts b/src/arm/microchip/at91sam9260ek.dts
new file mode 100644
index 0000000..720c154
--- /dev/null
+++ b/src/arm/microchip/at91sam9260ek.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Atmel at91sam9260 Evaluation Kit
+ *
+ *  Copyright (C) 2016 Atmel,
+ *		  2016 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Atmel at91sam9260ek";
+	compatible = "atmel,at91sam9260ek", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		stdout-path = &dbgu;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0_slot1
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 =
+					<&pinctrl_usart0
+					 &pinctrl_usart0_rts
+					 &pinctrl_usart0_cts
+					 &pinctrl_usart0_dtr_dsr
+					 &pinctrl_usart0_dcd
+					 &pinctrl_usart0_ri>;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@fffbc000 {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_ssc0_tx>;
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
+				flash@1 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <50000000>;
+					reg = <1>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				board {
+					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+
+			shdwc: poweroff@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			gpbr: syscon@fffffd50 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-3 {
+			label = "Button 3";
+			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+			wakeup-source;
+		};
+
+		button-4 {
+			label = "Button 4";
+			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+
+		24c512@50 {
+			compatible = "atmel,24c512";
+			reg = <0x50>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds5 {
+			label = "ds5";
+			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/src/arm/microchip/at91sam9261.dtsi b/src/arm/microchip/at91sam9261.dtsi
new file mode 100644
index 0000000..307b606
--- /dev/null
+++ b/src/arm/microchip/at91sam9261.dtsi
@@ -0,0 +1,667 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9261.dtsi - Device Tree Include file for AT91SAM9261 SoC
+ *
+ *  Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9261 family SoC";
+	compatible = "atmel,at91sam9261";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		ssc2 = &ssc2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x08000000>;
+	};
+
+	clocks {
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x28000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x28000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usb0: ohci@500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_SYSTEM 16>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		fb0: fb@600000 {
+			compatible = "atmel,at91sam9261-lcdc";
+			reg = <0x00600000 0x1000>;
+			interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_SYSTEM 17>;
+			clock-names = "lcdc_clk", "hclk";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9261-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x80000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000
+				  0x6 0x0 0x70000000 0x10000000
+				  0x7 0x0 0x80000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9261-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffa0000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			usb1: gadget@fffa4000 {
+				compatible = "atmel,at91sam9261-udc";
+				reg = <0xfffa4000 0x4000>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>, <&pmc PMC_TYPE_SYSTEM 7>;
+				clock-names = "pclk", "hclk";
+				atmel,matrix = <&matrix>;
+				status = "disabled";
+			};
+
+			mmc0: mmc@fffa8000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffa8000 0x600>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk>, <&pinctrl_mmc0_slot0_cmd_dat0>, <&pinctrl_mmc0_slot0_dat1_3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@fffac000 {
+				compatible = "atmel,at91sam9261-i2c";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c_twi>;
+				reg = <0xfffac000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				status = "disabled";
+			};
+
+			usart0: serial@fffb0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fffb4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fffb8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffbc000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffbc000 0x4000>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fffc0000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffc0000 0x4000>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc2: ssc@fffc4000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffc4000 0x4000>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			spi0: spi@fffc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffc8000 0x200>;
+				cs-gpios = <0>, <0>, <0>, <0>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@fffcc000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffcc000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			ramc: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			smc: smc@ffffec00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffec00 0x200>;
+			};
+
+			matrix: matrix@ffffee00 {
+				compatible = "atmel,at91sam9261-matrix", "syscon";
+				reg = <0xffffee00 0x200>;
+			};
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <29 30 31>;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x600>;
+
+				atmel,mux-mask =
+				      /*    A         B     */
+				      <0xffffffff 0xfffffff7>,  /* pioA */
+				      <0xffffffff 0xfffffff4>,  /* pioB */
+				      <0xffffffff 0xffffff07>;  /* pioC */
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 9  AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOC 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							<AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+					};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc2 {
+					pinctrl_ssc2_tx: ssc2_tx-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc2_rx: ssc2_rx-0 {
+						atmel,pins =
+							<AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c_bitbang: i2c-0-bitbang {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
+							<AT91_PIOA 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_i2c_twi: i2c-0-twi {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9261-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&slow_xtal>, <&main_xtal>;
+				clock-names = "slow_xtal", "main_xtal";
+			};
+
+			reset-controller@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+				clocks = <&slow_xtal>;
+			};
+
+			poweroff@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+				clocks = <&slow_xtal>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				status = "disabled";
+			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd50 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd50 0x10>;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_bitbang>;
+		gpios = <&pioA 7 GPIO_ACTIVE_HIGH>, /* sda */
+			<&pioA 8 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/src/arm/microchip/at91sam9261ek.dts b/src/arm/microchip/at91sam9261ek.dts
new file mode 100644
index 0000000..045cb25
--- /dev/null
+++ b/src/arm/microchip/at91sam9261ek.dts
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9261ek.dts - Device Tree file for Atmel at91sam9261 reference board
+ *
+ *  Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
+ */
+/dts-v1/;
+#include "at91sam9261.dtsi"
+
+/ {
+	model = "Atmel at91sam9261ek";
+	compatible = "atmel,at91sam9261ek", "atmel,at91sam9261", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		usb0: ohci@500000 {
+			status = "okay";
+		};
+
+		fb0: fb@600000 {
+			display = <&display0>;
+			atmel,power-control-gpio = <&pioA 12 GPIO_ACTIVE_LOW>;
+			status = "okay";
+
+			display0: panel {
+				bits-per-pixel = <16>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <1>;
+				atmel,lcd-wiring-mode = "BRG";
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <4965000>;
+						hactive = <240>;
+						vactive = <320>;
+						hback-porch = <1>;
+						hfront-porch = <33>;
+						vback-porch = <1>;
+						vfront-porch = <0>;
+						hsync-len = <5>;
+						vsync-len = <1>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+					};
+				};
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0x80000>;
+						};
+
+						bootloaderenv@c0000 {
+							label = "bootloader env";
+							reg = <0xc0000 0xc0000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
+			};
+		};
+
+		apb {
+			tcb0: timer@fffa0000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer1: timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioB 29 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>;
+				status = "okay";
+
+				flash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					reg = <0>;
+					spi-max-frequency = <15000000>;
+				};
+
+				tsc2046@2 {
+					reg = <2>;
+					compatible = "ti,ads7843";
+					interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
+					spi-max-frequency = <3000000>;
+					pendown-gpio = <&pioC 2 GPIO_ACTIVE_LOW>;
+
+					ti,x-min = /bits/ 16 <150>;
+					ti,x-max = /bits/ 16 <3830>;
+					ti,y-min = /bits/ 16 <190>;
+					ti,y-max = /bits/ 16 <3830>;
+					ti,vref-delay-usecs = /bits/ 16 <450>;
+					ti,x-plate-ohms = /bits/ 16 <450>;
+					ti,y-plate-ohms = /bits/ 16 <250>;
+					ti,pressure-max = /bits/ 16 <15000>;
+					ti,debounce-rep = /bits/ 16 <0>;
+					ti,debounce-tol = /bits/ 16 <65535>;
+					ti,debounce-max = /bits/ 16 <1>;
+
+					wakeup-source;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds8 {
+			label = "ds8";
+			gpios = <&pioA 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		ds7 {
+			label = "ds7";
+			gpios = <&pioA 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "nand-disk";
+		};
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			label = "button_0";
+			gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
+			linux,code = <256>;
+			wakeup-source;
+		};
+
+		button-1 {
+			label = "button_1";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			linux,code = <257>;
+			wakeup-source;
+		};
+
+		button-2 {
+			label = "button_2";
+			gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+			linux,code = <258>;
+			wakeup-source;
+		};
+
+		button-3 {
+			label = "button_3";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			linux,code = <259>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/src/arm/microchip/at91sam9263.dtsi b/src/arm/microchip/at91sam9263.dtsi
new file mode 100644
index 0000000..75d8ff2
--- /dev/null
+++ b/src/arm/microchip/at91sam9263.dtsi
@@ -0,0 +1,839 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9263 family SoC";
+	compatible = "atmel,at91sam9263";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		pwm0 = &pwm0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x08000000>;
+	};
+
+	clocks {
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	sram0: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x14000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x14000>;
+	};
+
+	sram1: sram@500000 {
+		compatible = "mmio-sram";
+		reg = <0x00500000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00500000 0x4000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <30 31>;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9263-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&slow_xtal>, <&main_xtal>;
+				clock-names = "slow_xtal", "main_xtal";
+			};
+
+			ramc0: ramc@ffffe200 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffe200 0x200>;
+			};
+
+			smc0: smc@ffffe400 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffe400 0x200>;
+			};
+
+			ramc1: ramc@ffffe800 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffe800 0x200>;
+			};
+
+			smc1: smc@ffffea00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffea00 0x200>;
+			};
+
+			matrix: matrix@ffffec00 {
+				compatible = "atmel,at91sam9263-matrix", "syscon";
+				reg = <0xffffec00 0x200>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			tcb0: timer@fff7c000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfff7c000 0x100>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			reset-controller@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+				clocks = <&slow_xtal>;
+			};
+
+			poweroff@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+				clocks = <&slow_xtal>;
+			};
+
+			pinctrl@fffff200 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff200 0xfffff200 0xa00>;
+
+				atmel,mux-mask = <
+				      /*    A         B     */
+				       0xfffffffb 0xffffe07f  /* pioA */
+				       0x0007ffff 0x39072fff  /* pioB */
+				       0xffffffff 0x3ffffff8  /* pioC */
+				       0xfffffbff 0xffffffff  /* pioD */
+				       0xffe00fff 0xfbfcff00  /* pioE */
+				      >;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA28 periph A */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA29 periph A */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD7 periph B */
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD8 periph B */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD5 periph B */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD6 periph B */
+					};
+				};
+
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							 <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				macb {
+					pinctrl_macb_rmii: macb_rmii-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC25 periph B */
+							 AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE21 periph A */
+							 AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE23 periph A */
+							 AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE24 periph A */
+							 AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE25 periph A */
+							 AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE26 periph A */
+							 AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE27 periph A */
+							 AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE28 periph A */
+							 AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE29 periph A */
+							 AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PE30 periph A */
+					};
+
+					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+						atmel,pins =
+							<AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC20 periph B */
+							 AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC21 periph B */
+							 AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC22 periph B */
+							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC23 periph B */
+							 AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC24 periph B */
+							 AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC25 periph B */
+							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC27 periph B */
+							 AT91_PIOE 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PE22 periph B */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA12 periph A */
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA1 periph A with pullup */
+							 AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA0 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA3 periph A with pullup */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA4 periph A with pullup */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA5 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA16 periph A with pullup */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA17 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA18 periph A with pullup */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA19 periph A with pullup */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA20 periph A with pullup */
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_clk: mmc1_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA6 periph A */
+					};
+
+					pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA7 periph A with pullup */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA8 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA9 periph A with pullup */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA10 periph A with pullup */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA11 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA21 periph A with pullup */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA22 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA23 periph A with pullup */
+							 AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA24 periph A with pullup */
+							 AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA25 periph A with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB0 periph B */
+							 AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB1 periph B */
+							 AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB2 periph B */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB3 periph B */
+							 AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB4 periph B */
+							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB5 periph B */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+							 AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB8 periph A */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB10 periph A */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB11 periph A */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA0 periph B SPI0_MISO pin */
+							 AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA1 periph B SPI0_MOSI pin */
+							 AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA2 periph B SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A SPI1_MISO pin */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A SPI1_MOSI pin */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB14 periph A SPI1_SPCK pin */
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOE 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOE 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC1 periph A */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC2 periph A */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC3 periph A */
+							 AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB9 periph B */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 periph A */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 periph A */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 periph A */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC9 periph A */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC10 periph A */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC11 periph A */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC14 periph A */
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC15 periph A */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC16 periph A */
+							 AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC12 periph B */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC18 periph A */
+							 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC19 periph A */
+							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC22 periph A */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC23 periph A */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC24 periph A */
+							 AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC17 periph B */
+							 AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC26 periph A */
+							 AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC27 periph A */
+					};
+				};
+
+				can {
+					pinctrl_can_rx_tx: can_rx_tx {
+						atmel,pins =
+							<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* CANRX, conflicts with IRQ0 */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* CANTX, conflicts with PCK0 */
+					};
+				};
+
+				ac97 {
+					pinctrl_ac97: ac97-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A AC97FS pin */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A AC97CK pin */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A AC97TX pin */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB14 periph A AC97RX pin */
+					};
+				};
+
+				pioA: gpio@fffff200 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff200 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioD: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioE: gpio@fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xffffee00 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart0: serial@fff8c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff8c000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fff90000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff90000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fff94000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff94000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@fff98000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfff98000 0x4000>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fff9c000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfff9c000 0x4000>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ac97: sound@fffa0000 {
+				compatible = "atmel,at91sam9263-ac97c";
+				reg = <0xfffa0000 0x4000>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ac97>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+				clock-names = "ac97_clk";
+				status = "disabled";
+			};
+
+			macb0: ethernet@fffbc000 {
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xfffbc000 0x100>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb_rmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 21>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			usb1: gadget@fff78000 {
+				compatible = "atmel,at91sam9263-udc";
+				reg = <0xfff78000 0x4000>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_SYSTEM 7>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@fff88000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfff88000 0x100>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				status = "disabled";
+			};
+
+			mmc0: mmc@fff80000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfff80000 0x600>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			mmc1: mmc@fff84000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfff84000 0x600>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			spi0: spi@fffa4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffa4000 0x200>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@fffa8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffa8000 0x200>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			pwm0: pwm@fffb8000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xfffb8000 0x300>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				clock-names = "pwm_clk";
+				status = "disabled";
+			};
+
+			can: can@fffac000 {
+				compatible = "atmel,at91sam9263-can";
+				reg = <0xfffac000 0x300>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can_rx_tx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "can_clk";
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				status = "disabled";
+			};
+
+			rtc@fffffd50 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd50 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd60 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd60 0x50>;
+				status = "disabled";
+			};
+		};
+
+		fb0: fb@700000 {
+			compatible = "atmel,at91sam9263-lcdc";
+			reg = <0x00700000 0x1000>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_PERIPHERAL 26>;
+			clock-names = "lcdc_clk", "hclk";
+			status = "disabled";
+		};
+
+		usb0: ohci@a00000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00a00000 0x100000>;
+			interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		ebi0: ebi@10000000 {
+			compatible = "atmel,at91sam9263-ebi0";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc0>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x80000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller0: nand-controller {
+				compatible = "atmel,at91sam9260-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		ebi1: ebi@70000000 {
+			compatible = "atmel,at91sam9263-ebi1";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc1>;
+			atmel,matrix = <&matrix>;
+			reg = <0x80000000 0x20000000>;
+			ranges = <0x0 0x0 0x80000000 0x10000000
+				  0x1 0x0 0x90000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller1: nand-controller {
+				compatible = "atmel,at91sam9260-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
+			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/src/arm/microchip/at91sam9263ek.dts b/src/arm/microchip/at91sam9263ek.dts
new file mode 100644
index 0000000..ce8baff
--- /dev/null
+++ b/src/arm/microchip/at91sam9263ek.dts
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9263ek.dts - Device Tree file for Atmel at91sam9263 reference board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9263.dtsi"
+
+/ {
+	model = "Atmel at91sam9263ek";
+	compatible = "atmel,at91sam9263ek", "atmel,at91sam9263", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <16367660>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			tcb0: timer@fff7c000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usart0: serial@fff8c000 {
+				pinctrl-0 = <
+					&pinctrl_usart0
+					&pinctrl_usart0_rts
+					&pinctrl_usart0_cts>;
+				status = "okay";
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioA 25 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fff80000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot0_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>;
+					wp-gpios = <&pioE 19 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOE 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH 	/* PE18 gpio CD pin pull up and deglitch */
+							 AT91_PIOE 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PE19 gpio WP pin pull up */
+					};
+				};
+			};
+
+			spi0: spi@fffa4000 {
+				status = "okay";
+				cs-gpios = <&pioA 5 0>, <0>, <0>, <0>;
+				flash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+		};
+
+		fb0: fb@700000 {
+			display = <&display0>;
+			status = "okay";
+
+			display0: panel {
+				bits-per-pixel = <16>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <1>;
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <4965000>;
+						hactive = <240>;
+						vactive = <320>;
+						hback-porch = <1>;
+						hfront-porch = <33>;
+						vback-porch = <1>;
+						vfront-porch = <0>;
+						hsync-len = <5>;
+						vsync-len = <1>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+					};
+				};
+			};
+		};
+
+		ebi0: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@80000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@a0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4a0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7ca0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@a00000 {
+			num-ports = <2>;
+			status = "okay";
+			atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH
+					   &pioA 21 GPIO_ACTIVE_HIGH
+					  >;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d3 {
+			label = "d3";
+			gpios = <&pioB 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		d2 {
+			label = "d2";
+			gpios = <&pioC 29 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "nand-disk";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-left-click {
+			label = "left_click";
+			gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
+			linux,code = <272>;
+			wakeup-source;
+		};
+
+		button-right-click {
+			label = "right_click";
+			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
+			linux,code = <273>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+
+		24c512@50 {
+			compatible = "atmel,24c512";
+			reg = <0x50>;
+			pagesize = <128>;
+		};
+	};
+};
diff --git a/src/arm/microchip/at91sam9g15.dtsi b/src/arm/microchip/at91sam9g15.dtsi
new file mode 100644
index 0000000..dde8827
--- /dev/null
+++ b/src/arm/microchip/at91sam9g15.dtsi
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9g15.dtsi - Device Tree Include file for AT91SAM9G15 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G15 SoC";
+	compatible = "atmel,at91sam9g15", "atmel,at91sam9x5";
+};
+
+&pinctrl {
+	atmel,mux-mask = <
+	      /*    A         B          C     */
+	       0xffffffff 0xffe0399f 0x00000000  /* pioA */
+	       0x00040000 0x00047e3f 0x00000000  /* pioB */
+	       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+	       0x003fffff 0x003f8000 0x00000000  /* pioD */
+	      >;
+};
+
+&pmc {
+	compatible = "atmel,at91sam9g15-pmc", "atmel,at91sam9x5-pmc", "syscon";
+};
diff --git a/src/arm/microchip/at91sam9g15ek.dts b/src/arm/microchip/at91sam9g15ek.dts
new file mode 100644
index 0000000..889a509
--- /dev/null
+++ b/src/arm/microchip/at91sam9g15ek.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9g15ek.dts - Device Tree file for AT91SAM9G15-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9g15.dtsi"
+#include "at91sam9x5dm.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G15-EK";
+	compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	backlight: backlight {
+		status = "okay";
+	};
+
+	bl_reg: backlight_regulator {
+		status = "okay";
+	};
+
+	panel: panel {
+		status = "okay";
+	};
+
+	panel_reg: panel_regulator {
+		status = "okay";
+	};
+};
+
+&hlcdc {
+	status = "okay";
+};
diff --git a/src/arm/microchip/at91sam9g20.dtsi b/src/arm/microchip/at91sam9g20.dtsi
new file mode 100644
index 0000000..738a43f
--- /dev/null
+++ b/src/arm/microchip/at91sam9g20.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G20 family SoC";
+	compatible = "atmel,at91sam9g20";
+
+	memory@20000000 {
+		reg = <0x20000000 0x08000000>;
+	};
+
+	sram0: sram@2ff000 {
+		status = "disabled";
+	};
+
+	sram1: sram@2fc000 {
+		compatible = "mmio-sram";
+		reg = <0x002fc000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x002fc000 0x8000>;
+	};
+
+	ahb {
+		apb {
+			i2c0: i2c@fffac000 {
+				compatible = "atmel,at91sam9g20-i2c";
+			};
+
+			ssc0: ssc@fffbc000 {
+				compatible = "atmel,at91sam9rl-ssc";
+			};
+
+			adc0: adc@fffe0000 {
+				atmel,adc-startup-time = <40>;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9g20-pmc", "atmel,at91sam9260-pmc", "syscon";
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/at91sam9g20ek.dts b/src/arm/microchip/at91sam9g20ek.dts
new file mode 100644
index 0000000..6de7a7c
--- /dev/null
+++ b/src/arm/microchip/at91sam9g20ek.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9g20ek.dts - Device Tree file for Atmel at91sam9g20ek board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9g20ek_common.dtsi"
+
+/ {
+	model = "Atmel at91sam9g20ek";
+	compatible = "atmel,at91sam9g20ek", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds5 {
+			label = "ds5";
+			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/src/arm/microchip/at91sam9g20ek_2mmc.dts b/src/arm/microchip/at91sam9g20ek_2mmc.dts
new file mode 100644
index 0000000..172af6f
--- /dev/null
+++ b/src/arm/microchip/at91sam9g20ek_2mmc.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9g20ek_2mmc.dts - Device Tree file for Atmel at91sam9g20ek 2 MMC board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9g20ek_common.dtsi"
+
+/ {
+	model = "Atmel at91sam9g20ek 2 mmc";
+	compatible = "atmel,at91sam9g20ek_2mmc", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	ahb {
+		apb {
+			mmc0: mmc@fffa8000 {
+				/* clk already mux wuth slot0 */
+				pinctrl-0 = <
+					&pinctrl_board_mmc0_slot0
+					&pinctrl_mmc0_slot0_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			pinctrl@fffff400 {
+				mmc0_slot0 {
+					pinctrl_board_mmc0_slot0: mmc0_slot0-board {
+						atmel,pins =
+							<AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PC2 gpio CD pin pull up and deglitch */
+					};
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioB 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds5 {
+			label = "ds5";
+			gpios = <&pioB 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/src/arm/microchip/at91sam9g20ek_common.dtsi b/src/arm/microchip/at91sam9g20ek_common.dtsi
new file mode 100644
index 0000000..565b99e
--- /dev/null
+++ b/src/arm/microchip/at91sam9g20ek_common.dtsi
@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+#include "at91sam9g20.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+
+	chosen {
+		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				board {
+					pinctrl_pck0_as_mck: pck0_as_mck {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC1 periph B */
+					};
+
+				};
+
+				usb1 {
+					pinctrl_usb1_vbus_gpio: usb1_vbus_gpio {
+						atmel,pins =
+							<AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PC5 GPIO */
+					};
+				};
+
+				mmc0_slot1 {
+					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PC9 gpio CD pin pull up and deglitch */
+					};
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 =
+					<&pinctrl_usart0
+					 &pinctrl_usart0_rts
+					 &pinctrl_usart0_cts
+					 &pinctrl_usart0_dtr_dsr
+					 &pinctrl_usart0_dcd
+					 &pinctrl_usart0_ri>;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
+				pinctrl-names = "default";
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0_slot1
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			ssc0: ssc@fffbc000 {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_ssc0_tx>;
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
+				flash@1 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <50000000>;
+					reg = <1>;
+				};
+			};
+
+			shdwc: poweroff@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			gpbr: syscon@fffffd50 {
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@80000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@a0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4a0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7ca0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+
+		24c512@50 {
+			compatible = "atmel,24c512";
+			reg = <0x50>;
+			vcc-supply = <&reg_3v3>;
+		};
+
+		wm8731: wm8731@1b {
+			compatible = "wm8731";
+			reg = <0x1b>;
+
+			/* PCK0 at 12MHz */
+			clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			clock-names = "mclk";
+			assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			assigned-clock-rates = <12000000>;
+
+			HPVDD-supply = <&vcc_dac>;
+			AVDD-supply = <&vcc_dac>;
+			DCVDD-supply = <&reg_3v3>;
+			DBVDD-supply = <&reg_3v3>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-3 {
+			label = "Button 3";
+			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+			wakeup-source;
+		};
+
+		button-4 {
+			label = "Button 4";
+			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	sound {
+		compatible = "atmel,at91sam9g20ek-wm8731-audio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_mck>;
+
+		atmel,model = "wm8731 @ AT91SAMG20EK";
+
+		atmel,audio-routing =
+			"Ext Spk", "LHPOUT",
+			"Int Mic", "MICIN";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8731>;
+	};
+
+	reg_5v: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		vin-supply = <&reg_5v>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_1v: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V";
+		vin-supply = <&reg_5v>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+	};
+
+	vcc_dac: fixedregulator3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_DAC";
+		vin-supply = <&reg_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
diff --git a/src/arm/microchip/at91sam9g25-gardena-smart-gateway.dts b/src/arm/microchip/at91sam9g25-gardena-smart-gateway.dts
new file mode 100644
index 0000000..92f2c05
--- /dev/null
+++ b/src/arm/microchip/at91sam9g25-gardena-smart-gateway.dts
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the GARDENA smart Gateway (Article No. 19000)
+ *
+ *  Copyright (C) 2020 GARDENA GmbH
+ */
+
+/dts-v1/;
+
+#include "at91sam9g25.dtsi"
+#include "at91sam9x5ek.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "GARDENA smart Gateway (Article No. 19000)";
+	compatible = "gardena,smart-gateway-at91sam", "atmel,at91sam9g25", "atmel,at91sam9x5",
+		"atmel,at91sam9";
+
+	aliases {
+		serial1 = &usart3;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button {
+			label = "USER_BTN1";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+		};
+	};
+
+	1wire_cm {
+		status = "disabled";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power_blue {
+			label = "smartgw:power:blue";
+			gpios = <&pioC 21 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		power_green {
+			label = "smartgw:power:green";
+			gpios = <&pioC 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		power_red {
+			label = "smartgw:power:red";
+			gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		radio_blue {
+			label = "smartgw:radio:blue";
+			gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		radio_green {
+			label = "smartgw:radio:green";
+			gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		radio_red {
+			label = "smartgw:radio:red";
+			gpios = <&pioC 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		internet_blue {
+			label = "smartgw:internet:blue";
+			gpios = <&pioC 15 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		internet_green {
+			label = "smartgw:internet:green";
+			gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		internet_red {
+			label = "smartgw:internet:red";
+			gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		heartbeat {
+			label = "smartgw:heartbeat";
+			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		pb18 {
+			status = "disabled";
+		};
+
+		pd21 {
+			status = "disabled";
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&usart0 {
+	status = "disabled";
+};
+
+&usart2 {
+	status = "disabled";
+};
+
+&usart3 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_usart3
+		     &pinctrl_usart3_rts
+		     &pinctrl_usart3_cts
+		    >;
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "disabled";
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&spi0 {
+	status = "disabled";
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&adc0 {
+	status = "disabled";
+};
+
+&ssc0 {
+	status = "disabled";
+};
diff --git a/src/arm/microchip/at91sam9g25.dtsi b/src/arm/microchip/at91sam9g25.dtsi
new file mode 100644
index 0000000..ec3c772
--- /dev/null
+++ b/src/arm/microchip/at91sam9g25.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9g25.dtsi - Device Tree Include file for AT91SAM9G25 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_isi.dtsi"
+#include "at91sam9x5_usart3.dtsi"
+#include "at91sam9x5_macb0.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G25 SoC";
+	compatible = "atmel,at91sam9g25", "atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe0399f 0xc000001c  /* pioA */
+				       0x0007ffff 0x00047e3f 0x00000000  /* pioB */
+				       0x80000000 0x07c0ffff 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9g25-pmc", "atmel,at91sam9x5-pmc", "syscon";
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/at91sam9g25ek.dts b/src/arm/microchip/at91sam9g25ek.dts
new file mode 100644
index 0000000..61b0bdb
--- /dev/null
+++ b/src/arm/microchip/at91sam9g25ek.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9g25.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G25-EK";
+	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&i2c0 {
+	camera@30 {
+		compatible = "ovti,ov2640";
+		reg = <0x30>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+		resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
+		pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
+		clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+		clock-names = "xvclk";
+		assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+		assigned-clock-rates = <25000000>;
+		status = "okay";
+
+		port {
+			ov2640_0: endpoint {
+				remote-endpoint = <&isi_0>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&isi {
+	status = "okay";
+
+	port {
+		isi_0: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ov2640_0>;
+			bus-width = <8>;
+			vsync-active = <1>;
+			hsync-active = <1>;
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&spi0 {
+	status = "disabled";
+};
diff --git a/src/arm/microchip/at91sam9g35.dtsi b/src/arm/microchip/at91sam9g35.dtsi
new file mode 100644
index 0000000..c9cfb93
--- /dev/null
+++ b/src/arm/microchip/at91sam9g35.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9g35.dtsi - Device Tree Include file for AT91SAM9G35 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
+#include "at91sam9x5_macb0.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G35 SoC";
+	compatible = "atmel,at91sam9g35", "atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe0399f 0xc000000c  /* pioA */
+				       0x000406ff 0x00047e3f 0x00000000  /* pioB */
+				       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9g35-pmc", "atmel,at91sam9x5-pmc", "syscon";
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/at91sam9g35ek.dts b/src/arm/microchip/at91sam9g35ek.dts
new file mode 100644
index 0000000..f966b56
--- /dev/null
+++ b/src/arm/microchip/at91sam9g35ek.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9g35ek.dts - Device Tree file for AT91SAM9G35-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9g35.dtsi"
+#include "at91sam9x5dm.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G35-EK";
+	compatible = "atmel,at91sam9g35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	backlight: backlight {
+		status = "okay";
+	};
+
+	bl_reg: backlight_regulator {
+		status = "okay";
+	};
+
+	panel: panel {
+		status = "okay";
+	};
+
+	panel_reg: panel_regulator {
+		status = "okay";
+	};
+};
+
+&hlcdc {
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
diff --git a/src/arm/microchip/at91sam9g45.dtsi b/src/arm/microchip/at91sam9g45.dtsi
new file mode 100644
index 0000000..325c63a
--- /dev/null
+++ b/src/arm/microchip/at91sam9g45.dtsi
@@ -0,0 +1,1023 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC
+ *                    applies to AT91SAM9G45, AT91SAM9M10,
+ *                    AT91SAM9G46, AT91SAM9M11 SoC
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9G45 family SoC";
+	compatible = "atmel,at91sam9g45";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		pwm0 = &pwm0;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <300000>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x10000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <31>;
+			};
+
+			ramc0: ramc@ffffe400 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe400 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
+				clock-names = "ddrck";
+			};
+
+			ramc1: ramc@ffffe600 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe600 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
+				clock-names = "ddrck";
+			};
+
+			smc: smc@ffffe800 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffe800 0x200>;
+			};
+
+			matrix: matrix@ffffea00 {
+				compatible = "atmel,at91sam9g45-matrix", "syscon";
+				reg = <0xffffea00 0x200>;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9g45-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+			};
+
+			reset-controller@fffffd00 {
+				compatible = "atmel,at91sam9g45-rstc";
+				reg = <0xfffffd00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+
+			poweroff@fffffd10 {
+				compatible = "atmel,at91sam9rl-shdwc";
+				reg = <0xfffffd10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			tcb0: timer@fff7c000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfff7c000 0x100>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			tcb1: timer@fffd4000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffd4000 0x100>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			dma: dma-controller@ffffec00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffec00 0x200>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+				clock-names = "dma_clk";
+			};
+
+			pinctrl@fffff200 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff200 0xfffff200 0xa00>;
+
+				atmel,mux-mask = <
+				      /*    A         B     */
+				       0xffffffff 0xffc003ff  /* pioA */
+				       0xffffffff 0x800f8f00  /* pioB */
+				       0xffffffff 0x00000e00  /* pioC */
+				       0xffffffff 0xff0c1381  /* pioD */
+				       0xffffffff 0x81ffff81  /* pioE */
+				      >;
+
+				/* shared pinctrl settings */
+				ac97 {
+					pinctrl_ac97: ac97-0 {
+						atmel,pins =
+							<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* AC97RX */
+							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* AC97TX */
+							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* AC97FS */
+							 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* AC97CK */
+					};
+				};
+
+				adc0 {
+					pinctrl_adc0_adtrg: adc0_adtrg {
+						atmel,pins = <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad0: adc0_ad0 {
+						atmel,pins = <AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad1: adc0_ad1 {
+						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad2: adc0_ad2 {
+						atmel,pins = <AT91_PIOD 22 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad3: adc0_ad3 {
+						atmel,pins = <AT91_PIOD 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad4: adc0_ad4 {
+						atmel,pins = <AT91_PIOD 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad5: adc0_ad5 {
+						atmel,pins = <AT91_PIOD 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad6: adc0_ad6 {
+						atmel,pins = <AT91_PIOD 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad7: adc0_ad7 {
+						atmel,pins = <AT91_PIOD 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA21 periph A TWCK0 */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA20 periph A TWD0 */
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A TWCK1 */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A TWD1 */
+					};
+				};
+
+				isi {
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
+						atmel,pins =
+							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* D0 */
+							AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* D1 */
+							AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* D2 */
+							AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* D3 */
+							AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* D4 */
+							AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* D5 */
+							AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* D6 */
+							AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* D7 */
+							AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PCK */
+							AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* VSYNC */
+							AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* HSYNC */
+					};
+
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* D8 */
+							AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D9 */
+					};
+
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* D10 */
+							AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D11 */
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB17 periph B */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB15 periph B */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD16 periph A */
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD17 periph A */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC9 periph B */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC11 periph B */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA23 periph B */
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA24 periph B */
+					};
+				};
+
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							 <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				macb {
+					pinctrl_macb_rmii: macb_rmii-0 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA10 periph A */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA16 periph A */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA18 periph A */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA19 periph A */
+					};
+
+					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA6 periph B */
+							 AT91_PIOA 7 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA7 periph B */
+							 AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA8 periph B */
+							 AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA9 periph B */
+							 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA29 periph B */
+							 AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA30 periph B */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA1 periph A with pullup */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA2 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA3 periph A with pullup */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA4 periph A with pullup */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA5 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA6 periph A with pullup */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA7 periph A with pullup */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA8 periph A with pullup */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA9 periph A with pullup */
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA31 periph A */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA22 periph A with pullup */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA23 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA24 periph A with pullup */
+							 AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA25 periph A with pullup */
+							 AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA26 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 {
+						atmel,pins =
+							<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA27 periph A with pullup */
+							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA28 periph A with pullup */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA29 periph A with pullup */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA30 periph A with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD0 periph A */
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD1 periph A */
+							 AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD2 periph A */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD3 periph A */
+							 AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD4 periph A */
+							 AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD5 periph A */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD10 periph A */
+							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD11 periph A */
+							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD12 periph A */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD13 periph A */
+							 AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD14 periph A */
+							 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD15 periph A */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A SPI0_MISO pin */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A SPI0_MOSI pin */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB2 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A SPI1_MISO pin */
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A SPI1_MOSI pin */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB16 periph A SPI1_SPCK pin */
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOD 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOE 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE0 periph A */
+							 AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE2 periph A */
+							 AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE3 periph A */
+							 AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE4 periph A */
+							 AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE5 periph A */
+							 AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE6 periph A */
+							 AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE7 periph A */
+							 AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE8 periph A */
+							 AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE9 periph A */
+							 AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE10 periph A */
+							 AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE11 periph A */
+							 AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE12 periph A */
+							 AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE13 periph A */
+							 AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE14 periph A */
+							 AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE15 periph A */
+							 AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE16 periph A */
+							 AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE17 periph A */
+							 AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE18 periph A */
+							 AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE19 periph A */
+							 AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE20 periph A */
+							 AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE21 periph A */
+							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE22 periph A */
+							 AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE23 periph A */
+							 AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE24 periph A */
+							 AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE25 periph A */
+							 AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE26 periph A */
+							 AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE27 periph A */
+							 AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE28 periph A */
+							 AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE29 periph A */
+							 AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PE30 periph A */
+					};
+				};
+
+				pioA: gpio@fffff200 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff200 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioD: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				};
+
+				pioE: gpio@fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				reg = <0xffffee00 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart0: serial@fff8c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff8c000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fff90000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff90000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fff94000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff94000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fff98000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff98000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			macb0: ethernet@fffbc000 {
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xfffbc000 0x100>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb_rmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_PERIPHERAL 25>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			trng@fffcc000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xfffcc000 0x100>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+			};
+
+			i2c0: i2c@fff84000 {
+				compatible = "atmel,at91sam9g10-i2c";
+				reg = <0xfff84000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@fff88000 {
+				compatible = "atmel,at91sam9g10-i2c";
+				reg = <0xfff88000 0x100>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				status = "disabled";
+			};
+
+			ssc0: ssc@fff9c000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xfff9c000 0x4000>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fffa0000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xfffa0000 0x4000>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ac97: sound@fffac000 {
+				compatible = "atmel,at91sam9263-ac97c";
+				reg = <0xfffac000 0x4000>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 4>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ac97>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "ac97_clk";
+				status = "disabled";
+			};
+
+			adc0: adc@fffb0000 {
+				compatible = "atmel,at91sam9g45-adc";
+				reg = <0xfffb0000 0x100>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-channels-used = <0xff>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-startup-time = <40>;
+			};
+
+			isi@fffb4000 {
+				compatible = "atmel,at91sam9g45-isi";
+				reg = <0xfffb4000 0x4000>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			pwm0: pwm@fffb8000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xfffb8000 0x300>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+				status = "disabled";
+			};
+
+			mmc0: mmc@fff80000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfff80000 0x600>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			mmc1: mmc@fffd0000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffd0000 0x600>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>;
+				dma-names = "rxtx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			spi0: spi@fffa4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffa4000 0x200>;
+				interrupts = <14 4 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@fffa8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffa8000 0x200>;
+				interrupts = <15 4 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			usb2: gadget@fff78000 {
+				compatible = "atmel,at91sam9g45-udc";
+				reg = <0x00600000 0x80000
+				       0xfff78000 0x400>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+
+			clk32k: clock-controller@fffffd50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffd50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			rtc@fffffdb0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffdb0 0x30>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd60 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd60 0x10>;
+				status = "disabled";
+			};
+		};
+
+		fb0: fb@500000 {
+			compatible = "atmel,at91sam9g45-lcdc";
+			reg = <0x00500000 0x1000>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>;
+			clock-names = "hclk", "lcdc_clk";
+			status = "disabled";
+		};
+
+		usb0: ohci@700000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb1: ehci@800000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00800000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9g45-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x80000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9g45-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 21 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <5>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/src/arm/microchip/at91sam9m10g45ek.dts b/src/arm/microchip/at91sam9m10g45ek.dts
new file mode 100644
index 0000000..071db4f
--- /dev/null
+++ b/src/arm/microchip/at91sam9m10g45ek.dts
@@ -0,0 +1,393 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9g45.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Atmel AT91SAM9M10G45-EK";
+	compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M root=/dev/mtdblock1 rw rootfstype=jffs2";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@70000000 {
+		reg = <0x70000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+		      clock-frequency = <32768>;
+		};
+
+		main_xtal {
+		      clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			tcb0: timer@fff7c000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usart1: serial@fff90000 {
+				pinctrl-0 =
+					<&pinctrl_usart1
+					 &pinctrl_usart1_rts
+					 &pinctrl_usart1_cts>;
+				status = "okay";
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			i2c0: i2c@fff84000 {
+				status = "okay";
+				ov2640: camera@30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+					assigned-clock-rates = <25000000>;
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
+			};
+
+			i2c1: i2c@fff88000 {
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			mmc0: mmc@fff80000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_slot0_clk_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			mmc1: mmc@fffd0000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc1
+					&pinctrl_mmc1_slot0_clk_cmd_dat0
+					&pinctrl_mmc1_slot0_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>;
+					wp-gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				camera_sensor {
+					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+						atmel,pins =
+							<AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_reset: sensor_reset-0 {
+						atmel,pins =
+							<AT91_PIOD 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_power: sensor_power-0 {
+						atmel,pins =
+							<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD10 gpio CD pin pull up and deglitch */
+					};
+				};
+
+				mmc1 {
+					pinctrl_board_mmc1: mmc1-board {
+						atmel,pins =
+							<AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH	/* PD11 gpio CD pin pull up and deglitch */
+							 AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PD29 gpio WP pin pull up */
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm_leds: pwm-led {
+						atmel,pins =
+							<AT91_PIOD 0  AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PD0 periph B */
+							 AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PD31 periph B */
+					};
+				};
+			};
+
+			spi0: spi@fffa4000 {
+				status = "okay";
+				cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
+				flash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <13000000>;
+					reg = <0>;
+				};
+			};
+
+			usb2: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			ac97: sound@fffac000 {
+				status = "okay";
+			};
+
+			adc0: adc@fffb0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_ad6
+					&pinctrl_adc0_ad7>;
+				atmel,adc-ts-wires = <4>;
+				status = "okay";
+			};
+
+			isi@fffb4000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				status = "okay";
+				port {
+					isi_0: endpoint {
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
+					};
+				};
+			};
+
+			pwm0: pwm@fffb8000 {
+				status = "okay";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm_leds>;
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
+			gpbr: syscon@fffffd60 {
+				status = "okay";
+			};
+
+			rtc@fffffdb0 {
+				status = "okay";
+			};
+		};
+
+		fb0: fb@500000 {
+			display = <&display0>;
+			status = "okay";
+
+			display0: panel {
+				bits-per-pixel = <32>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <9>;
+				atmel,lcd-wiring-mode = "RGB";
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <9000000>;
+						hactive = <480>;
+						vactive = <272>;
+						hback-porch = <1>;
+						hfront-porch = <1>;
+						vback-porch = <40>;
+						vfront-porch = <1>;
+						hsync-len = <45>;
+						vsync-len = <1>;
+					};
+				};
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 8 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						boot@0 {
+							label = "bootstrap/uboot/kernel";
+							reg = <0x0 0x400000>;
+						};
+
+						rootfs@400000 {
+							label = "rootfs";
+							reg = <0x400000 0x3C00000>;
+						};
+
+						data@4000000 {
+							label = "data";
+							reg = <0x4000000 0xC000000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@700000 {
+			status = "okay";
+			num-ports = <2>;
+			atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW
+					   &pioD 3 GPIO_ACTIVE_LOW>;
+		};
+
+		usb1: ehci@800000 {
+			status = "okay";
+		};
+	};
+
+	led-controller-1 {
+		compatible = "gpio-leds";
+
+		led-1 {
+			label = "d8";
+			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	led-controller-2 {
+		compatible = "pwm-leds";
+
+		led-2 {
+			label = "d6";
+			pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "nand-disk";
+		};
+
+		led-3 {
+			label = "d7";
+			pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-left-click {
+			label = "left_click";
+			gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
+			linux,code = <272>;
+			wakeup-source;
+		};
+
+		button-right-click {
+			label = "right_click";
+			gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
+			linux,code = <273>;
+			wakeup-source;
+		};
+
+		button-left {
+			label = "Joystick Left";
+			gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
+			linux,code = <105>;
+		};
+
+		button-right {
+			label = "Joystick Right";
+			gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
+			linux,code = <106>;
+		};
+
+		button-up {
+			label = "Joystick Up";
+			gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
+			linux,code = <103>;
+		};
+
+		button-down {
+			label = "Joystick Down";
+			gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
+			linux,code = <108>;
+		};
+
+		button-enter {
+			label = "Joystick Press";
+			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
+			linux,code = <28>;
+		};
+	};
+};
diff --git a/src/arm/microchip/at91sam9n12.dtsi b/src/arm/microchip/at91sam9n12.dtsi
new file mode 100644
index 0000000..8dc04e9
--- /dev/null
+++ b/src/arm/microchip/at91sam9n12.dtsi
@@ -0,0 +1,799 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9n12.dtsi - Device Tree include file for AT91SAM9N12 SoC
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Hong Xu <hong.xu@atmel.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9N12 SoC";
+	compatible = "atmel,at91sam9n12";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		ssc0 = &ssc0;
+		pwm0 = &pwm0;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x8000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <31>;
+			};
+
+			matrix: matrix@ffffde00 {
+				compatible = "atmel,at91sam9n12-matrix", "syscon";
+				reg = <0xffffde00 0x100>;
+			};
+
+			pmecc: ecc-engine@ffffe000 {
+				compatible = "atmel,at91sam9g45-pmecc";
+				reg = <0xffffe000 0x600>,
+				      <0xffffe600 0x200>;
+			};
+
+			ramc0: ramc@ffffe800 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe800 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
+				clock-names = "ddrck";
+			};
+
+			smc: smc@ffffea00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffea00 0x200>;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9n12-pmc", "syscon";
+				reg = <0xfffffc00 0x200>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+			};
+
+			reset-controller@fffffe00 {
+				compatible = "atmel,at91sam9g45-rstc";
+				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffe30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			poweroff@fffffe10 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			clk32k: clock-controller@fffffe50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffe50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
+			};
+
+			mmc0: mmc@f0008000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf0008000 0x600>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "mci_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			tcb0: timer@f8008000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf8008000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			tcb1: timer@f800c000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf800c000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			hlcdc: hlcdc@f8038000 {
+				compatible = "atmel,at91sam9n12-hlcdc";
+				reg = <0xf8038000 0x2000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
+				clock-names = "periph_clk", "sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_pwm>;
+					#pwm-cells = <3>;
+				};
+			};
+
+			dma: dma-controller@ffffec00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffec00 0x200>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				clock-names = "dma_clk";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe07983 0x00000000  /* pioA */
+				       0x00040000 0x00047e0f 0x00000000  /* pioB */
+				       0xfdffffff 0x07c00000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				lcd {
+					pinctrl_lcd_base: lcd-base-0 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+							 AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
+							 AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+					};
+
+					pinctrl_lcd_pwm: lcd-pwm-0 {
+						atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+					};
+
+					pinctrl_lcd_rgb888: lcd-rgb-3 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA1 periph A with pullup */
+							 AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA0 periph A */
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA3 periph A */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA6 periph A with pullup */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA5 periph A */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA8 periph A with pullup */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA7 periph A */
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PC23 periph B with pullup */
+							 AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC22 periph B */
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC24 periph B */
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC25 periph B */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* PC9 periph C with pullup */
+							 AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC8 periph C */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE
+							 AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							 <AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA16 periph A with pullup */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA15 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA18 periph A with pullup */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA19 periph A with pullup */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA20 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
+						atmel,pins =
+							<AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA11 periph B with pullup */
+							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA12 periph B with pullup */
+							 AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA13 periph B with pullup */
+							 AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA14 periph B with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA24 periph B */
+							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
+							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA26 periph B */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A SPI0_MISO pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A SPI0_MOSI pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA13 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA21 periph B SPI1_MISO pin */
+							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B SPI1_MOSI pin */
+							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA23 periph B SPI1_SPCK pin */
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE
+							 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma 0 AT91_DMA_CFG_PER_ID(21)>,
+				       <&dma 0 AT91_DMA_CFG_PER_ID(22)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			usart0: serial@f801c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf801c000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@f8028000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8028000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8010000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8010000 0x100>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma 1 AT91_DMA_CFG_PER_ID(14)>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@f8014000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8014000 0x100>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(15)>,
+				       <&dma 1 AT91_DMA_CFG_PER_ID(16)>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				status = "disabled";
+			};
+
+			spi0: spi@f0000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0000000 0x100>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(1)>,
+				       <&dma 1 AT91_DMA_CFG_PER_ID(2)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@f0004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0004000 0x100>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma 1 AT91_DMA_CFG_PER_ID(4)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			watchdog@fffffe40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffe40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			rtc@fffffeb0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffeb0 0x40>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			pwm0: pwm@f8034000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xf8034000 0x300>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+				status = "disabled";
+			};
+
+			usb1: gadget@f803c000 {
+				compatible = "atmel,at91sam9260-udc";
+				reg = <0xf803c000 0x4000>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_SYSTEM 7>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+		};
+
+		usb0: ohci@500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x00100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9x5-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x60000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9g45-nand-controller";
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/src/arm/microchip/at91sam9n12ek.dts b/src/arm/microchip/at91sam9n12ek.dts
new file mode 100644
index 0000000..4c644d4
--- /dev/null
+++ b/src/arm/microchip/at91sam9n12ek.dts
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9n12ek.dts - Device Tree file for AT91SAM9N12-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Hong Xu <hong.xu@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9n12.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9N12-EK";
+	compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "root=/dev/mtdblock1 rw rootfstype=jffs2";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <16000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0010000 {
+				status = "okay";
+			};
+
+			tcb0: timer@f8008000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			i2c0: i2c@f8010000 {
+				status = "okay";
+
+				wm8904: codec@1a {
+					compatible = "wlf,wm8904";
+					reg = <0x1a>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+					clock-names = "mclk";
+				};
+
+				qt1070: keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioA>;
+					interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+				};
+			};
+
+			mmc0: mmc@f0008000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_slot0_clk_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			pinctrl@fffff400 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PA7 gpio CD pin pull up and deglitch */
+					};
+				};
+
+				qt1070 {
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+
+				sound {
+					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usb1 {
+					pinctrl_usb1_vbus_sense: usb1_vbus_sense {
+						atmel,pins =
+							<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PB16 gpio usb vbus sense, no pull up and deglitch */
+					};
+				};
+			};
+
+			spi0: spi@f0000000 {
+				status = "okay";
+				cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
+				flash@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			hlcdc: hlcdc@f8038000 {
+				status = "okay";
+
+				hlcdc-display-controller {
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+					port@0 {
+						hlcdc_panel_output: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&panel_input>;
+						};
+					};
+				};
+			};
+
+			usb1: gadget@f803c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usb1_vbus_sense>;
+				atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+
+			rtc@fffffeb0 {
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-ecc-strength = <2>;
+					nand-ecc-step-size = <512>;
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+				};
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <1>;
+			atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>;
+			status = "okay";
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		power-supply = <&bl_reg>;
+		status = "okay";
+	};
+
+	bl_reg: backlight_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight-power-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d8 {
+			label = "d8";
+			gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+		};
+
+		d9 {
+			label = "d9";
+			gpios = <&pioB 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "nand-disk";
+		};
+
+		d10 {
+			label = "d10";
+			gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-enter {
+			label = "Enter";
+			gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
+			linux,code = <28>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		compatible = "qiaodian,qd43003c0-40";
+		backlight = <&backlight>;
+		power-supply = <&panel_reg>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	panel_reg: panel_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-power-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		status = "okay";
+	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+		atmel,model = "wm8904 @ AT91SAM9N12";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+	};
+};
diff --git a/src/arm/microchip/at91sam9rl.dtsi b/src/arm/microchip/at91sam9rl.dtsi
new file mode 100644
index 0000000..7436b5c
--- /dev/null
+++ b/src/arm/microchip/at91sam9rl.dtsi
@@ -0,0 +1,861 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9rl.dtsi - Device Tree Include file for AT91SAM9RL family SoC
+ *
+ *  Copyright (C) 2014 Microchip
+ *  Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9RL family SoC";
+	compatible = "atmel,at91sam9rl", "atmel,at91sam9";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		pwm0 = &pwm0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x04000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x10000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		fb0: fb@500000 {
+			compatible = "atmel,at91sam9rl-lcdc";
+			reg = <0x00500000 0x1000>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>;
+			clock-names = "hclk", "lcdc_clk";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9rl-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x80000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9g45-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffa0000 0x100>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>, <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			mmc0: mmc@fffa4000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffa4000 0x600>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@fffa8000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfffa8000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@fffac000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfffac000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			usart0: serial@fffb0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fffb4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fffb8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fffbc000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffbc000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffc0000 {
+				compatible = "atmel,at91sam9rl-ssc";
+				reg = <0xfffc0000 0x4000>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				status = "disabled";
+			};
+
+			ssc1: ssc@fffc4000 {
+				compatible = "atmel,at91sam9rl-ssc";
+				reg = <0xfffc4000 0x4000>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				status = "disabled";
+			};
+
+			pwm0: pwm@fffc8000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xfffc8000 0x300>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+				clock-names = "pwm_clk";
+				status = "disabled";
+			};
+
+			spi0: spi@fffcc000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffcc000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			adc0: adc@fffd0000 {
+				compatible = "atmel,at91sam9rl-adc";
+				reg = <0xfffd0000 0x100>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-use-external-triggers;
+				atmel,adc-channels-used = <0x3f>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-startup-time = <40>;
+			};
+
+			usb0: gadget@fffd4000 {
+				compatible = "atmel,at91sam9rl-udc";
+				reg = <0x00600000 0x100000>,
+				      <0xfffd4000 0x4000>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+
+			dma0: dma-controller@ffffe600 {
+				compatible = "atmel,at91sam9rl-dma";
+				reg = <0xffffe600 0x200>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+				clock-names = "dma_clk";
+			};
+
+			ramc0: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			smc: smc@ffffec00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffec00 0x200>;
+			};
+
+			matrix: matrix@ffffee00 {
+				compatible = "atmel,at91sam9rl-matrix", "syscon";
+				reg = <0xffffee00 0x200>;
+			};
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <31>;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				atmel,mux-mask =
+					/*    A         B     */
+					<0xffffffff 0xe05c6738>,  /* pioA */
+					<0xffffffff 0x0000c780>,  /* pioB */
+					<0xffffffff 0xe3ffff0e>,  /* pioC */
+					<0x003fffff 0x0001ff3c>;  /* pioD */
+
+				/* shared pinctrl settings */
+				adc0 {
+					pinctrl_adc0_ts: adc0_ts-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad0: adc0_ad0-0 {
+						atmel,pins = <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad1: adc0_ad1-0 {
+						atmel,pins = <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad2: adc0_ad2-0 {
+						atmel,pins = <AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad3: adc0_ad3-0 {
+						atmel,pins = <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad4: adc0_ad4-0 {
+						atmel,pins = <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad5: adc0_ad5-0 {
+						atmel,pins = <AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_adtrg: adc0_adtrg-0 {
+						atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ebi {
+					pinctrl_ebi_addr_nand: ebi-addr-0 {
+						atmel,pins =
+							<AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c_gpio0 {
+					pinctrl_i2c_gpio0: i2c_gpio0-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
+							<AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+					};
+				};
+
+				i2c_gpio1 {
+					pinctrl_i2c_gpio1: i2c_gpio1-0 {
+						atmel,pins =
+							<AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
+							<AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_oe_we: nand-oe-we-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
+						atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
+						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
+						atmel,pins = <AT91_PIOD 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
+						atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
+						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
+						atmel,pins = <AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
+						atmel,pins = <AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
+						atmel,pins = <AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_2: pwm0_pwm2-2 {
+						atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
+						atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
+						atmel,pins = <AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOD 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_dcd: usart0_dcd-0 {
+						atmel,pins =
+							<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_ri: usart0_ri-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_sck: usart0_sck-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_sck: usart1_sck-0 {
+						atmel,pins =
+							<AT91_PIOD 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_sck: usart2_sck-0 {
+						atmel,pins =
+							<AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOD 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart3_sck: usart3_sck-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				};
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9rl-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+			};
+
+			reset-controller@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			poweroff@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			clk32k: clock-controller@fffffd50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffd50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd60 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd60 0x10>;
+				status = "disabled";
+			};
+
+			rtc@fffffe00 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffe00 0x40>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */
+			<&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio0>;
+		status = "disabled";
+	};
+
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */
+			<&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio1>;
+		status = "disabled";
+	};
+};
diff --git a/src/arm/microchip/at91sam9rlek.dts b/src/arm/microchip/at91sam9rlek.dts
new file mode 100644
index 0000000..a573512
--- /dev/null
+++ b/src/arm/microchip/at91sam9rlek.dts
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9rlek.dts - Device Tree file for Atmel at91sam9rl reference board
+ *
+ *  Copyright (C) 2014 Microchip
+ *  Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ */
+/dts-v1/;
+#include "at91sam9rl.dtsi"
+
+/ {
+	model = "Atmel at91sam9rlek";
+	compatible = "atmel,at91sam9rlek", "atmel,at91sam9rl", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "rootfstype=ubifs root=ubi0:rootfs ubi.mtd=5 rw";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		fb0: fb@500000 {
+			display = <&display0>;
+			status = "okay";
+
+			display0: panel {
+				bits-per-pixel = <16>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <1>;
+				atmel,lcd-wiring-mode = "RGB";
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <4965000>;
+						hactive = <240>;
+						vactive = <320>;
+						hback-porch = <1>;
+						hfront-porch = <33>;
+						vback-porch = <1>;
+						vfront-porch = <0>;
+						hsync-len = <5>;
+						vsync-len = <1>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+					};
+				};
+			};
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_addr_nand>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_oe_we
+					     &pinctrl_nand_cs
+					     &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0x80000>;
+						};
+
+						bootloaderenv@c0000 {
+							label = "bootloader env";
+							reg = <0xc0000 0xc0000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
+			};
+		};
+
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			mmc0: mmc@fffa4000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot0_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 = <
+					&pinctrl_usart0
+					&pinctrl_usart0_rts
+					&pinctrl_usart0_cts>;
+				status = "okay";
+			};
+
+			adc0: adc@fffd0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_adtrg>;
+				atmel,adc-ts-wires = <4>;
+				status = "okay";
+			};
+
+			usb0: gadget@fffd4000 {
+				atmel,vbus-gpio = <&pioA 8 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			spi0: spi@fffcc000 {
+				status = "okay";
+				cs-gpios = <&pioA 28 0>, <0>, <0>, <0>;
+				flash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <15000000>;
+					reg = <0>;
+				};
+			};
+
+			pwm0: pwm@fffc8000 {
+				status = "okay";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwm1_2>,
+					<&pinctrl_pwm0_pwm2_2>;
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOA 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+			};
+
+			rtc@fffffe00 {
+				status = "okay";
+			};
+		};
+	};
+
+	led-controller-1 {
+		compatible = "pwm-leds";
+
+		led-1 {
+			label = "ds1";
+			pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+		};
+
+		led-2 {
+			label = "ds2";
+			pwms = <&pwm0 2 5000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+		};
+	};
+
+	led-controller-2 {
+		compatible = "gpio-leds";
+
+		led-3 {
+			label = "ds3";
+			gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-right-click {
+			label = "right_click";
+			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
+			linux,code = <273>;
+			wakeup-source;
+		};
+
+		button-left-click {
+			label = "left_click";
+			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
+			linux,code = <272>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+
+	i2c-gpio-1 {
+		status = "okay";
+	};
+};
diff --git a/src/arm/microchip/at91sam9x25.dtsi b/src/arm/microchip/at91sam9x25.dtsi
new file mode 100644
index 0000000..7036f5f
--- /dev/null
+++ b/src/arm/microchip/at91sam9x25.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9x25.dtsi - Device Tree Include file for AT91SAM9X25 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_usart3.dtsi"
+#include "at91sam9x5_macb0.dtsi"
+#include "at91sam9x5_macb1.dtsi"
+#include "at91sam9x5_can.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X25 SoC";
+	compatible = "atmel,at91sam9x25", "atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe03fff 0xc000001c  /* pioA */
+				       0x0007ffff 0x00047e3f 0x00000000  /* pioB */
+				       0x80000000 0xfffd0000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9x25-pmc", "atmel,at91sam9x5-pmc", "syscon";
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/at91sam9x25ek.dts b/src/arm/microchip/at91sam9x25ek.dts
new file mode 100644
index 0000000..ad7c6b3
--- /dev/null
+++ b/src/arm/microchip/at91sam9x25ek.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9x25ek.dts - Device Tree file for AT91SAM9X25-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9x25.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X25-EK";
+	compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&macb1 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_pwm0_1>;
+	status = "okay";
+};
diff --git a/src/arm/microchip/at91sam9x35.dtsi b/src/arm/microchip/at91sam9x35.dtsi
new file mode 100644
index 0000000..eb03b04
--- /dev/null
+++ b/src/arm/microchip/at91sam9x35.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9x35.dtsi - Device Tree Include file for AT91SAM9X35 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
+#include "at91sam9x5_macb0.dtsi"
+#include "at91sam9x5_can.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X35 SoC";
+	compatible = "atmel,at91sam9x35", "atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe03fff 0xc000000c  /* pioA */
+				       0x000406ff 0x00047e3f 0x00000000  /* pioB */
+				       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9x35-pmc", "atmel,at91sam9x5-pmc", "syscon";
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/at91sam9x35ek.dts b/src/arm/microchip/at91sam9x35ek.dts
new file mode 100644
index 0000000..66675c7
--- /dev/null
+++ b/src/arm/microchip/at91sam9x35ek.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9x35ek.dts - Device Tree file for AT91SAM9X35-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9x35.dtsi"
+#include "at91sam9x5dm.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X35-EK";
+	compatible = "atmel,at91sam9x35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&bl_reg {
+	status = "okay";
+};
+
+&hlcdc {
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&panel {
+	status = "okay";
+};
+
+&panel_reg {
+	status = "okay";
+};
diff --git a/src/arm/microchip/at91sam9x5.dtsi b/src/arm/microchip/at91sam9x5.dtsi
new file mode 100644
index 0000000..a7456c2
--- /dev/null
+++ b/src/arm/microchip/at91sam9x5.dtsi
@@ -0,0 +1,978 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
+ *                   applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35,
+ *                   AT91SAM9X25, AT91SAM9X35 SoC
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9x5 family SoC";
+	compatible = "atmel,at91sam9x5";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		ssc0 = &ssc0;
+		pwm0 = &pwm0;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x8000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <31>;
+			};
+
+			matrix: matrix@ffffde00 {
+				compatible = "atmel,at91sam9x5-matrix", "syscon";
+				reg = <0xffffde00 0x100>;
+			};
+
+			pmecc: ecc-engine@ffffe000 {
+				compatible = "atmel,at91sam9g45-pmecc";
+				reg = <0xffffe000 0x600>,
+				      <0xffffe600 0x200>;
+			};
+
+			ramc0: ramc@ffffe800 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe800 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
+				clock-names = "ddrck";
+			};
+
+			smc: smc@ffffea00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffea00 0x200>;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9x5-pmc", "syscon";
+				reg = <0xfffffc00 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+			};
+
+			reset_controller: reset-controller@fffffe00 {
+				compatible = "atmel,at91sam9g45-rstc";
+				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shutdown_controller: poweroff@fffffe10 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffe30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			clk32k: clock-controller@fffffe50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffe50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
+			};
+
+			tcb0: timer@f8008000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf8008000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			tcb1: timer@f800c000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf800c000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			dma0: dma-controller@ffffec00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffec00 0x200>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				clock-names = "dma_clk";
+			};
+
+			dma1: dma-controller@ffffee00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffee00 0x200>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+				clock-names = "dma_clk";
+			};
+
+			pinctrl: pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ebi {
+					pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
+						atmel,pins =
+							<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_data_8_15: ebi-data-msb-0 {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_addr_nand: ebi-addr-0 {
+						atmel,pins =
+							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA3 periph A */
+					};
+
+					pinctrl_usart0_sck: usart0_sck-0 {
+						atmel,pins =
+							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA4 periph A */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC27 periph C */
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC28 periph C */
+					};
+
+					pinctrl_usart1_sck: usart1_sck-0 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC29 periph C */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
+					};
+
+					pinctrl_usart2_sck: usart2_sck-0 {
+						atmel,pins =
+							<AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB2 periph B */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC8 periph C */
+							 AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;	/* PC9 periph C with pullup */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC16 periph C */
+							 AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;	/* PC17 periph C with pullup */
+					};
+				};
+
+				nand {
+					pinctrl_nand_oe_we: nand-oe-we-0 {
+						atmel,pins =
+							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA16 periph A with pullup */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA15 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA18 periph A with pullup */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA19 periph A with pullup */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA20 periph A with pullup */
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA13 periph B */
+							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA12 periph B with pullup */
+							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA11 periph B with pullup */
+					};
+
+					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA2 periph B with pullup */
+							 AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA3 periph B with pullup */
+							 AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA4 periph B with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA24 periph B */
+							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
+							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA26 periph B */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A SPI0_MISO pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A SPI0_MOSI pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA13 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA21 periph B SPI1_MISO pin */
+							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B SPI1_MOSI pin */
+							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA23 periph B SPI1_SPCK pin */
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA30 periph A I2C0 data */
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA31 periph A I2C0 clock */
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC0 periph C I2C1 data */
+							 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC1 periph C I2C1 clock */
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2: i2c2-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB4 periph B I2C2 data */
+							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB5 periph B I2C2 clock */
+					};
+				};
+
+				i2c_gpio0 {
+					pinctrl_i2c_gpio0: i2c_gpio0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PA30 gpio multidrive I2C0 data */
+							 AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PA31 gpio multidrive I2C0 clock */
+					};
+				};
+
+				i2c_gpio1 {
+					pinctrl_i2c_gpio1: i2c_gpio1-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PC0 gpio multidrive I2C1 data */
+							 AT91_PIOC 1 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PC1 gpio multidrive I2C1 clock */
+					};
+				};
+
+				i2c_gpio2 {
+					pinctrl_i2c_gpio2: i2c_gpio2-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PB4 gpio multidrive I2C2 data */
+							 AT91_PIOB 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PB5 gpio multidrive I2C2 clock */
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
+						atmel,pins =
+							<AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
+						atmel,pins =
+							<AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
+						atmel,pins =
+							<AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
+						atmel,pins =
+							<AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
+						atmel,pins =
+							<AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
+						atmel,pins =
+							<AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
+						atmel,pins =
+							<AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <19>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <22>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+			};
+
+			ssc0: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma0 1 AT91_DMA_CFG_PER_ID(14)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			mmc0: mmc@f0008000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf0008000 0x600>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "mci_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			mmc1: mmc@f000c000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf000c000 0x600>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
+				clock-names = "mci_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>,
+				       <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart0: serial@f801c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf801c000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>,
+				       <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>,
+				       <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8010000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8010000 0x100>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>,
+				       <&dma0 1 AT91_DMA_CFG_PER_ID(8)>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@f8014000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8014000 0x100>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>,
+				       <&dma1 1 AT91_DMA_CFG_PER_ID(6)>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@f8018000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8018000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>,
+				       <&dma0 1 AT91_DMA_CFG_PER_ID(10)>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				status = "disabled";
+			};
+
+			uart0: serial@f8040000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8040000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart1: serial@f8044000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8044000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			adc0: adc@f804c000 {
+				compatible = "atmel,at91sam9x5-adc";
+				reg = <0xf804c000 0x100>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>,
+					 <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-use-external-triggers;
+				atmel,adc-channels-used = <0xffff>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-sample-hold-time = <11>;
+			};
+
+			spi0: spi@f0000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0000000 0x100>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(1)>,
+				       <&dma0 1 AT91_DMA_CFG_PER_ID(2)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@f0004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0004000 0x100>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(1)>,
+				       <&dma1 1 AT91_DMA_CFG_PER_ID(2)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			usb2: gadget@f803c000 {
+				compatible = "atmel,at91sam9g45-udc";
+				reg = <0x00500000 0x80000
+				       0xf803c000 0x400>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 23>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			watchdog: watchdog@fffffe40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffe40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			rtc: rtc@fffffeb0 {
+				compatible = "atmel,at91sam9x5-rtc";
+				reg = <0xfffffeb0 0x40>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			pwm0: pwm@f8034000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xf8034000 0x300>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		usb0: ohci@600000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb1: ehci@700000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9x5-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x60000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9g45-nand-controller";
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio0>;
+		status = "disabled";
+	};
+
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */
+			 &pioC 1 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio1>;
+		status = "disabled";
+	};
+
+	i2c-gpio-2 {
+		compatible = "i2c-gpio";
+		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
+			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio2>;
+		status = "disabled";
+	};
+};
diff --git a/src/arm/microchip/at91sam9x5_can.dtsi b/src/arm/microchip/at91sam9x5_can.dtsi
new file mode 100644
index 0000000..04ccb25
--- /dev/null
+++ b/src/arm/microchip/at91sam9x5_can.dtsi
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9x5_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
+ * Ethernet interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			can0: can@f8000000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf8000000 0x300>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can0_rx_tx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			can1: can@f8004000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf8004000 0x300>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_rx_tx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			pinctrl@fffff400 {
+				can0 {
+					pinctrl_can0_rx_tx: can0_rx_tx {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX0, conflicts with DRXD */
+							AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* CANTX0, conflicts with DTXD */
+					};
+				};
+
+				can1 {
+					pinctrl_can1_rx_tx: can1_rx_tx {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX1, conflicts with RXD1 */
+							AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* CANTX1, conflicts with TXD1 */
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/at91sam9x5_isi.dtsi b/src/arm/microchip/at91sam9x5_isi.dtsi
new file mode 100644
index 0000000..4ce98f0
--- /dev/null
+++ b/src/arm/microchip/at91sam9x5_isi.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9x5_isi.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
+ * Image Sensor Interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				isi {
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D0, conflicts with LCDDAT0 */
+							AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D1, conflicts with LCDDAT1 */
+							AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D2, conflicts with LCDDAT2 */
+							AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D3, conflicts with LCDDAT3 */
+							AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D4, conflicts with LCDDAT4 */
+							AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D5, conflicts with LCDDAT5 */
+							AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D6, conflicts with LCDDAT6 */
+							AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D7, conflicts with LCDDAT7 */
+							AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_PCK, conflicts with LCDDAT12 */
+							AT91_PIOC 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_HSYNC, conflicts with LCDDAT14 */
+							AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* ISI_VSYNC, conflicts with LCDDAT13 */
+					};
+
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D8, conflicts with LCDDAT8 */
+							AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* ISI_D9, conflicts with LCDDAT9 */
+					};
+
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D10, conflicts with LCDDAT10 */
+							AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* ISI_D11, conflicts with LCDDAT11 */
+					};
+				};
+			};
+
+			isi: isi@f8048000 {
+				compatible = "atmel,at91sam9g45-isi";
+				reg = <0xf8048000 0x4000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/at91sam9x5_lcd.dtsi b/src/arm/microchip/at91sam9x5_lcd.dtsi
new file mode 100644
index 0000000..f81c9d1
--- /dev/null
+++ b/src/arm/microchip/at91sam9x5_lcd.dtsi
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9x5_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
+ * LCD controller.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			hlcdc: hlcdc@f8038000 {
+				compatible = "atmel,at91sam9x5-hlcdc";
+				reg = <0xf8038000 0x4000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_pwm>;
+					#pwm-cells = <3>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	lcd {
+		pinctrl_lcd_base: lcd-base-0 {
+			atmel,pins =
+				<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+				 AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+				 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
+				 AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+				 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+		};
+
+		pinctrl_lcd_pwm: lcd-pwm-0 {
+			atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+		};
+
+		pinctrl_lcd_rgb444: lcd-rgb-0 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+				 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+				 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+				 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+				 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+				 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+				 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+				 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+				 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+				 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+				 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+				 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD11 pin */
+		};
+
+		pinctrl_lcd_rgb565: lcd-rgb-1 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+				 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+				 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+				 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+				 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+				 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+				 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+				 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+				 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+				 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+				 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+				 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+				 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+				 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+				 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+				 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD15 pin */
+		};
+
+		pinctrl_lcd_rgb666: lcd-rgb-2 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+				 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+				 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+				 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+				 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+				 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+				 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+				 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+				 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+				 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+				 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+				 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+				 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+				 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+				 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+				 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+				 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+				 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD17 pin */
+		};
+
+		pinctrl_lcd_rgb888: lcd-rgb-3 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+				 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+				 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+				 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+				 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+				 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+				 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+				 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+				 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+				 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+				 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+				 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+				 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+				 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+				 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+				 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+				 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+				 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+				 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+				 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+				 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+				 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+				 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+				 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+		};
+	};
+};
diff --git a/src/arm/microchip/at91sam9x5_macb0.dtsi b/src/arm/microchip/at91sam9x5_macb0.dtsi
new file mode 100644
index 0000000..222aa30
--- /dev/null
+++ b/src/arm/microchip/at91sam9x5_macb0.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
+ * Ethernet interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				macb0 {
+					pinctrl_macb0_rmii: macb0_rmii-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
+							 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
+					};
+
+					pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB8 periph A */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A */
+							 AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A */
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB17 periph A */
+					};
+				};
+			};
+
+			macb0: ethernet@f802c000 {
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xf802c000 0x100>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/at91sam9x5_macb1.dtsi b/src/arm/microchip/at91sam9x5_macb1.dtsi
new file mode 100644
index 0000000..26bf9b5
--- /dev/null
+++ b/src/arm/microchip/at91sam9x5_macb1.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9x5_macb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 2
+ * Ethernet interfaces.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC16 periph B */
+							 AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC18 periph B */
+							 AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC19 periph B */
+							 AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC20 periph B */
+							 AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC21 periph B */
+							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC27 periph B */
+							 AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC28 periph B */
+							 AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC29 periph B */
+							 AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC30 periph B */
+							 AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC31 periph B */
+					};
+				};
+			};
+
+			macb1: ethernet@f8030000 {
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xf8030000 0x100>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/at91sam9x5_usart3.dtsi b/src/arm/microchip/at91sam9x5_usart3.dtsi
new file mode 100644
index 0000000..a47c765
--- /dev/null
+++ b/src/arm/microchip/at91sam9x5_usart3.dtsi
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9x5_usart3.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * 4 USART.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	aliases {
+		serial4 = &usart3;
+	};
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC24 periph B */
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC25 periph B */
+					};
+
+					pinctrl_usart3_sck: usart3_sck-0 {
+						atmel,pins =
+							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC26 periph B */
+					};
+				};
+			};
+
+			usart3: serial@f8028000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8028000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(14)>,
+				       <&dma1 1 (AT91_DMA_CFG_PER_ID(15) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/at91sam9x5cm.dtsi b/src/arm/microchip/at91sam9x5cm.dtsi
new file mode 100644
index 0000000..cdd37f6
--- /dev/null
+++ b/src/arm/microchip/at91sam9x5cm.dtsi
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9x5cm.dtsi - Device Tree Include file for AT91SAM9x5 CPU Module
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+
+/ {
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@f8008000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			pinctrl@fffff400 {
+				1wire_cm {
+					pinctrl_1wire_cm: 1wire_cm-0 {
+						atmel,pins = <AT91_PIOB 18 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB18 multidrive, conflicts with led */
+					};
+				};
+			};
+
+			rtc@fffffeb0 {
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_addr_nand
+				     &pinctrl_ebi_data_0_7>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_oe_we
+					     &pinctrl_nand_cs
+					     &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-ecc-strength = <2>;
+					nand-ecc-step-size = <512>;
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						uboot@40000 {
+							label = "u-boot";
+							reg = <0x40000 0xc0000>;
+						};
+
+						ubootenvred@100000 {
+							label = "U-Boot Env Redundant";
+							reg = <0x100000 0x40000>;
+						};
+
+						ubootenv@140000 {
+							label = "U-Boot Env";
+							reg = <0x140000 0x40000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pb18 {
+			label = "pb18";
+			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		pd21 {
+			label = "pd21";
+			gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	1wire_cm {
+		compatible = "w1-gpio";
+		gpios = <&pioB 18 GPIO_ACTIVE_HIGH>;
+		linux,open-drain;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_1wire_cm>;
+		status = "okay";
+	};
+
+};
diff --git a/src/arm/microchip/at91sam9x5dm.dtsi b/src/arm/microchip/at91sam9x5dm.dtsi
new file mode 100644
index 0000000..a927803
--- /dev/null
+++ b/src/arm/microchip/at91sam9x5dm.dtsi
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9x5dm.dtsi - Device Tree file for SAM9x5 display module
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Free Electrons
+ *
+ *  Author: Boris Brezillon <boris.brezillon@free-electrons.com>
+ */
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		power-supply = <&bl_reg>;
+		status = "disabled";
+	};
+
+	bl_reg: backlight_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight-power-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		status = "disabled";
+	};
+
+	panel: panel {
+		compatible = "foxlink,fl500wvr00-a0t";
+		backlight = <&backlight>;
+		power-supply = <&panel_reg>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	panel_reg: panel_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-power-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		status = "disabled";
+	};
+};
+
+&adc0 {
+	atmel,adc-ts-wires = <4>;
+	atmel,adc-ts-pressure-threshold = <10000>;
+	status = "okay";
+};
+
+&i2c0 {
+	keyboard@1b {
+		compatible = "qt1070";
+		reg = <0x1b>;
+		interrupt-parent = <&pioA>;
+		interrupts = <7 0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qt1070_irq>;
+		wakeup-source;
+	};
+};
+
+&hlcdc {
+	hlcdc-display-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+		port@0 {
+			hlcdc_panel_output: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_input>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_qt1070_irq: qt1070_irq {
+			atmel,pins =
+				<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+	};
+};
diff --git a/src/arm/microchip/at91sam9x5ek.dtsi b/src/arm/microchip/at91sam9x5ek.dtsi
new file mode 100644
index 0000000..5f4eaa6
--- /dev/null
+++ b/src/arm/microchip/at91sam9x5ek.dtsi
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+#include "at91sam9x5cm.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X5-EK";
+	compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	sound {
+		compatible = "atmel,sam9x5-wm8731-audio";
+
+		atmel,model = "wm8731 @ AT91SAM9X5EK";
+
+		atmel,audio-routing =
+			"Headphone Jack", "RHPOUT",
+			"Headphone Jack", "LHPOUT",
+			"LLINEIN", "Line In Jack",
+			"RLINEIN", "Line In Jack";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8731>;
+	};
+};
+
+&adc0 {
+	atmel,adc-ts-wires = <4>;
+	atmel,adc-ts-pressure-threshold = <10000>;
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	wm8731: wm8731@1a {
+		compatible = "wm8731";
+		reg = <0x1a>;
+	};
+};
+
+&mmc0 {
+	pinctrl-0 = <
+		&pinctrl_board_mmc0
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mmc1 {
+	pinctrl-0 = <
+		&pinctrl_board_mmc1
+		&pinctrl_mmc1_slot0_clk_cmd_dat0
+		&pinctrl_mmc1_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl {
+	camera_sensor {
+		pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
+			atmel,pins =
+				<AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_MCK */
+		};
+
+		pinctrl_sensor_power: sensor_power-0 {
+			atmel,pins =
+				<AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_sensor_reset: sensor_reset-0 {
+			atmel,pins =
+				<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	mmc0 {
+		pinctrl_board_mmc0: mmc0-board {
+			atmel,pins =
+				<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
+		};
+	};
+
+	mmc1 {
+		pinctrl_board_mmc1: mmc1-board {
+			atmel,pins =
+				<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD14 gpio CD pin pull up and deglitch */
+		};
+	};
+
+	usb2 {
+		pinctrl_board_usb2: usb2-board {
+			atmel,pins =
+				<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB16 gpio vbus sense, deglitch */
+		};
+	};
+};
+
+&spi0 {
+	cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
+	status = "disabled"; /* conflicts with mmc1 */
+
+	flash@0 {
+		compatible = "atmel,at25df321a";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&ssc0 {
+	status = "okay";
+};
+
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
+			   &pioD 19 GPIO_ACTIVE_LOW
+			   &pioD 20 GPIO_ACTIVE_LOW
+			  >;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_board_usb2>;
+	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/src/arm/microchip/at91sam9xe.dtsi b/src/arm/microchip/at91sam9xe.dtsi
new file mode 100644
index 0000000..f571f77
--- /dev/null
+++ b/src/arm/microchip/at91sam9xe.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91sam9xe.dtsi - Device Tree Include file for AT91SAM9XE family SoC
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Alexandre Belloni <alexandre.Belloni@free-electrons.com>
+ */
+
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9XE family SoC";
+	compatible = "atmel,at91sam9xe", "atmel,at91sam9260";
+
+	sram0: sram@2ff000 {
+		status = "disabled";
+	};
+
+	sram1: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x4000>;
+	};
+};
diff --git a/src/arm/microchip/ethernut5.dts b/src/arm/microchip/ethernut5.dts
new file mode 100644
index 0000000..ad7a085
--- /dev/null
+++ b/src/arm/microchip/ethernut5.dts
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ethernut5.dts - Device Tree file for Ethernut 5 board
+ *
+ * Copyright (C) 2012 egnite GmbH <info@egnite.de>
+ */
+/dts-v1/;
+#include "at91sam9xe.dtsi"
+
+/ {
+	model = "Ethernut 5";
+	compatible = "egnite,ethernut5", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x08000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs>;
+				pinctrl-names = "default";
+
+				nand: nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						root@0 {
+							label = "root";
+							reg = <0x0 0x08000000>;
+						};
+
+						data@20000 {
+							label = "data";
+							reg = <0x08000000 0x38000000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+
+		pcf8563@50 {
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+		};
+	};
+};
diff --git a/src/arm/microchip/evk-pro3.dts b/src/arm/microchip/evk-pro3.dts
new file mode 100644
index 0000000..6d519d0
--- /dev/null
+++ b/src/arm/microchip/evk-pro3.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * evk-pro3.dts - Device Tree file for Telit EVK-PRO3 with Telit GE863-PRO3
+ *
+ * Copyright (C) 2012 Telit,
+ *               2012 Fabio Porcedda <fabio.porcedda@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "ge863-pro3.dtsi"
+
+/ {
+	model = "Telit EVK-PRO3 for Telit GE863-PRO3";
+	compatible = "telit,evk-pro3", "atmel,at91sam9260", "atmel,at91sam9";
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+	};
+
+	ahb {
+		apb {
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usart0: serial@fffb0000 {
+				status = "okay";
+			};
+
+			usart2: serial@fffb8000 {
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+
+};
diff --git a/src/arm/microchip/ge863-pro3.dtsi b/src/arm/microchip/ge863-pro3.dtsi
new file mode 100644
index 0000000..dbba33e
--- /dev/null
+++ b/src/arm/microchip/ge863-pro3.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ge863_pro3.dtsi - Device Tree file for Telit GE863-PRO3
+ *
+ * Copyright (C) 2012 Telit,
+ *               2012 Fabio Porcedda <fabio.porcedda@gmail.com>
+ */
+
+#include "at91sam9260.dtsi"
+
+/ {
+	clocks {
+		main_xtal {
+			clock-frequency = <6000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						boot@0 {
+							label = "boot";
+							reg = <0x0 0x7c0000>;
+						};
+
+						root@7c0000 {
+							label = "root";
+							reg = <0x7c0000 0x7840000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs";
+	};
+};
diff --git a/src/arm/microchip/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts b/src/arm/microchip/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
new file mode 100644
index 0000000..0f555eb
--- /dev/null
+++ b/src/arm/microchip/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for the Kontron KSwitch D10 MMT 6G-2GS
+ */
+
+/dts-v1/;
+#include "lan966x-kontron-kswitch-d10-mmt.dtsi"
+
+/ {
+	model = "Kontron KSwitch D10 MMT 6G-2GS";
+	compatible = "kontron,kswitch-d10-mmt-6g-2gs", "kontron,s1921",
+		     "microchip,lan9668", "microchip,lan966";
+
+	aliases {
+		i2c0 = &i2c4;
+		i2c1 = &i2c1;
+	};
+
+	sfp0: sfp0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c4>;
+		los-gpios = <&sgpio_in 1 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in 1 1 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <2500>;
+		tx-disable-gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in 0 2 GPIO_ACTIVE_HIGH>;
+		rate-select0-gpios = <&sgpio_out 2 0 GPIO_ACTIVE_HIGH>;
+		rate-select1-gpios = <&sgpio_out 2 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp1: sfp1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		los-gpios = <&sgpio_in 1 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in 1 3 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <2500>;
+		tx-disable-gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in 0 3 GPIO_ACTIVE_HIGH>;
+		rate-select0-gpios = <&sgpio_out 2 2 GPIO_ACTIVE_HIGH>;
+		rate-select1-gpios = <&sgpio_out 2 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c1: i2c@600 {
+		pinctrl-0 = <&fc1_c_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c4: i2c@600 {
+		pinctrl-0 = <&fc4_b_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&gpio {
+	fc1_c_pins: fc1-c-i2c-pins {
+		/* SCL, SDA */
+		pins = "GPIO_47", "GPIO_48";
+		function = "fc1_c";
+	};
+
+	fc4_b_pins: fc4-b-i2c-pins {
+		/* SCL, SDA */
+		pins = "GPIO_57", "GPIO_58";
+		function = "fc4_b";
+	};
+};
+
+&port2 {
+	phys = <&serdes 2 SERDES6G(0)>;
+	sfp = <&sfp0>;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&port3 {
+	phys = <&serdes 3 SERDES6G(1)>;
+	sfp = <&sfp1>;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	status = "okay";
+};
diff --git a/src/arm/microchip/lan966x-kontron-kswitch-d10-mmt-8g.dts b/src/arm/microchip/lan966x-kontron-kswitch-d10-mmt-8g.dts
new file mode 100644
index 0000000..ad5d8b5
--- /dev/null
+++ b/src/arm/microchip/lan966x-kontron-kswitch-d10-mmt-8g.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for the Kontron KSwitch D10 MMT 8G
+ */
+
+/dts-v1/;
+#include "lan966x-kontron-kswitch-d10-mmt.dtsi"
+
+/ {
+	model = "Kontron KSwitch D10 MMT 8G";
+	compatible = "kontron,kswitch-d10-mmt-8g", "kontron,s1921",
+		     "microchip,lan9668", "microchip,lan966";
+};
+
+&mdio0 {
+	phy2: ethernet-phy@3 {
+		reg = <3>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	phy3: ethernet-phy@4 {
+		reg = <4>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&port2 {
+	phys = <&serdes 2 SERDES6G(0)>;
+	phy-handle = <&phy2>;
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	status = "okay";
+};
+
+&port3 {
+	phys = <&serdes 3 SERDES6G(1)>;
+	phy-handle = <&phy3>;
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	status = "okay";
+};
diff --git a/src/arm/microchip/lan966x-kontron-kswitch-d10-mmt.dtsi b/src/arm/microchip/lan966x-kontron-kswitch-d10-mmt.dtsi
new file mode 100644
index 0000000..4268937
--- /dev/null
+++ b/src/arm/microchip/lan966x-kontron-kswitch-d10-mmt.dtsi
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Common part of the device tree for the Kontron KSwitch D10 MMT
+ */
+
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	aliases {
+		serial0 = &usart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		pinctrl-0 = <&reset_pins>;
+		pinctrl-names = "default";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	usart0: serial@200 {
+		pinctrl-0 = <&usart0_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi3: spi@400 {
+		pinctrl-0 = <&fc3_b_pins>, <&spi3_cs_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+		cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&gpio {
+	pinctrl-0 = <&phy_int_pins>;
+	pinctrl-names = "default";
+
+	fc3_b_pins: fc3-b-pins {
+		/* SCK, MISO, MOSI */
+		pins = "GPIO_51", "GPIO_52", "GPIO_53";
+		function = "fc3_b";
+	};
+
+	miim_c_pins: miim-c-pins {
+		/* MDC, MDIO */
+		pins = "GPIO_59", "GPIO_60";
+		function = "miim_c";
+	};
+
+	phy_int_pins: phy-int-pins {
+		/* PHY_INT# */
+		pins = "GPIO_24";
+		function = "gpio";
+	};
+
+	reset_pins: reset-pins {
+		/* SYS_RST# */
+		pins = "GPIO_56";
+		function = "gpio";
+	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1 */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34";
+		function = "sgpio_a";
+	};
+
+	sgpio_b_pins: sgpio-b-pins {
+		/* LD */
+		pins = "GPIO_64";
+		function = "sgpio_b";
+	};
+
+	spi3_cs_pins: spi3-cs-pins {
+		/* CS# */
+		pins = "GPIO_46";
+		function = "gpio";
+	};
+
+	usart0_pins: usart0-pins {
+		/* RXD, TXD */
+		pins = "GPIO_25", "GPIO_26";
+		function = "fc0_b";
+	};
+
+	usbs_a_pins: usbs-a-pins {
+		/* VBUS_DET */
+		pins = "GPIO_66";
+		function = "gpio";
+	};
+};
+
+&mdio0 {
+	pinctrl-0 = <&miim_c_pins>;
+	pinctrl-names = "default";
+	reset-gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+	clock-frequency = <2500000>;
+	status = "okay";
+
+	phy4: ethernet-phy@5 {
+		reg = <5>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
+	};
+
+	phy5: ethernet-phy@6 {
+		reg = <6>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
+	};
+
+	phy6: ethernet-phy@7 {
+		reg = <7>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
+	};
+
+	phy7: ethernet-phy@8 {
+		reg = <8>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
+	};
+};
+
+&mdio1 {
+	status = "okay";
+};
+
+&phy0 {
+	status = "okay";
+};
+
+&phy1 {
+	status = "okay";
+};
+
+&port0 {
+	phys = <&serdes 0 CU(0)>;
+	phy-handle = <&phy0>;
+	phy-mode = "gmii";
+	status = "okay";
+};
+
+&port1 {
+	phys = <&serdes 1 CU(1)>;
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+	status = "okay";
+};
+
+&port4 {
+	phys = <&serdes 4 SERDES6G(2)>;
+	phy-handle = <&phy4>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&port5 {
+	phys = <&serdes 5 SERDES6G(2)>;
+	phy-handle = <&phy5>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&port6 {
+	phys = <&serdes 6 SERDES6G(2)>;
+	phy-handle = <&phy6>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&port7 {
+	phys = <&serdes 7 SERDES6G(2)>;
+	phy-handle = <&phy7>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>, <&sgpio_b_pins>;
+	pinctrl-names = "default";
+	bus-frequency = <8000000>;
+	/* arbitrary range because all GPIOs are in software mode */
+	microchip,sgpio-port-ranges = <0 11>;
+	status = "okay";
+
+	sgpio_in: gpio@0 {
+		ngpios = <128>;
+	};
+
+	sgpio_out: gpio@1 {
+		ngpios = <128>;
+	};
+};
+
+&switch {
+	status = "okay";
+};
+
+&udc {
+	pinctrl-0 = <&usbs_a_pins>;
+	pinctrl-names = "default";
+	atmel,vbus-gpio = <&gpio 66 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/src/arm/microchip/lan966x-pcb8290.dts b/src/arm/microchip/lan966x-pcb8290.dts
new file mode 100644
index 0000000..3b7577e
--- /dev/null
+++ b/src/arm/microchip/lan966x-pcb8290.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x-pcb8290.dts - Device Tree file for LAN966X-PCB8290 board
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Horatiu Vultur <horatiu.vultur@microchip.com>
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	model = "Microchip EVB LAN9668";
+	compatible = "microchip,lan9668-pcb8290", "microchip,lan9668", "microchip,lan966";
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+&aes {
+	status = "disabled"; /* Reserved by secure OS */
+};
+
+&gpio {
+	miim_a_pins: mdio-pins {
+		/* MDC, MDIO */
+		pins = "GPIO_28", "GPIO_29";
+		function = "miim_a";
+	};
+
+	pps_out_pins: pps-out-pins {
+		/* 1pps output */
+		pins = "GPIO_38";
+		function = "ptpsync_3";
+	};
+
+	ptp_ext_pins: ptp-ext-pins {
+		/* 1pps input */
+		pins = "GPIO_35";
+		function = "ptpsync_0";
+	};
+
+	udc_pins: ucd-pins {
+		/* VBUS_DET B */
+		pins = "GPIO_8";
+		function = "usb_slave_b";
+	};
+};
+
+&mdio0 {
+	pinctrl-0 = <&miim_a_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ext_phy0: ethernet-phy@7 {
+		reg = <7>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy1: ethernet-phy@8 {
+		reg = <8>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy2: ethernet-phy@9 {
+		reg = <9>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy3: ethernet-phy@10 {
+		reg = <10>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy4: ethernet-phy@15 {
+		reg = <15>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy5: ethernet-phy@16 {
+		reg = <16>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy6: ethernet-phy@17 {
+		reg = <17>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy7: ethernet-phy@18 {
+		reg = <18>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+};
+
+&port0 {
+	reg = <2>;
+	phy-handle = <&ext_phy2>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 0 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port1 {
+	reg = <3>;
+	phy-handle = <&ext_phy3>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 1 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port2 {
+	reg = <0>;
+	phy-handle = <&ext_phy0>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 2 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port3 {
+	reg = <1>;
+	phy-handle = <&ext_phy1>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 3 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port4 {
+	reg = <6>;
+	phy-handle = <&ext_phy6>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 4 SERDES6G(2)>;
+	status = "okay";
+};
+
+&port5 {
+	reg = <7>;
+	phy-handle = <&ext_phy7>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 5 SERDES6G(2)>;
+	status = "okay";
+};
+
+&port6 {
+	reg = <4>;
+	phy-handle = <&ext_phy4>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 6 SERDES6G(2)>;
+	status = "okay";
+};
+
+&port7 {
+	reg = <5>;
+	phy-handle = <&ext_phy5>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 7 SERDES6G(2)>;
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&switch {
+	pinctrl-0 = <&pps_out_pins>, <&ptp_ext_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&udc {
+	pinctrl-0 = <&udc_pins>;
+	pinctrl-names = "default";
+	atmel,vbus-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/src/arm/microchip/lan966x-pcb8291.dts b/src/arm/microchip/lan966x-pcb8291.dts
new file mode 100644
index 0000000..3a3d76a
--- /dev/null
+++ b/src/arm/microchip/lan966x-pcb8291.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x_pcb8291.dts - Device Tree file for PCB8291
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	model = "Microchip EVB - LAN9662";
+	compatible = "microchip,lan9662-pcb8291", "microchip,lan9662", "microchip,lan966";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &usart3;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-s0-blue {
+			label = "s0:blue";
+			gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s0-green {
+			label = "s0:green";
+			gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-blue {
+			label = "s1:blue";
+			gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-green {
+			label = "s1:green";
+			gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&aes {
+	status = "disabled"; /* Reserved by secure OS */
+};
+
+&gpio {
+	fc3_b_pins: fc3-b-pins {
+		/* RX, TX */
+		pins = "GPIO_52", "GPIO_53";
+		function = "fc3_b";
+	};
+
+	can0_b_pins:  can0-b-pins {
+		/* RX, TX */
+		pins = "GPIO_35", "GPIO_36";
+		function = "can0_b";
+	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1, LD */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
+		function = "sgpio_a";
+	};
+};
+
+&can0 {
+	pinctrl-0 = <&can0_b_pins>;
+	pinctrl-names = "default";
+	status = "disabled"; /* Conflict with switch */
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	usart3: serial@200 {
+		pinctrl-0 = <&fc3_b_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&mdio1 {
+	status = "okay";
+};
+
+&phy0 {
+	status = "okay";
+};
+
+&phy1 {
+	status = "okay";
+};
+
+&port0 {
+	phy-handle = <&phy0>;
+	phy-mode = "gmii";
+	phys = <&serdes 0 CU(0)>;
+	status = "okay";
+};
+
+&port1 {
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+	phys = <&serdes 1 CU(1)>;
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>;
+	pinctrl-names = "default";
+	microchip,sgpio-port-ranges = <0 3>, <8 11>;
+	status = "okay";
+
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
+&switch {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/src/arm/microchip/lan966x-pcb8309.dts b/src/arm/microchip/lan966x-pcb8309.dts
new file mode 100644
index 0000000..0cb505f
--- /dev/null
+++ b/src/arm/microchip/lan966x-pcb8309.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x_pcb8309.dts - Device Tree file for PCB8309
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	model = "Microchip EVB - LAN9662";
+	compatible = "microchip,lan9662-pcb8309", "microchip,lan9662", "microchip,lan966";
+
+	aliases {
+		serial0 = &usart3;
+		i2c102 = &i2c102;
+		i2c103 = &i2c103;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mux-controls = <&mux>;
+		i2c-parent = <&i2c4>;
+
+		i2c102: i2c-sfp@1 {
+			reg = <1>;
+		};
+
+		i2c103: i2c-sfp@2 {
+			reg = <2>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-s0-green {
+			label = "s0:green";
+			gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s0-red {
+			label = "s0:red";
+			gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-green {
+			label = "s1:green";
+			gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-red {
+			label = "s1:red";
+			gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&sgpio_out 11 0 GPIO_ACTIVE_HIGH>, /* p11b0 */
+			    <&sgpio_out 11 1 GPIO_ACTIVE_HIGH>; /* p11b1 */
+	};
+
+	sfp2: sfp2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c102>;
+		tx-disable-gpios = <&sgpio_out 10 0 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in  2 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in  2 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in  1 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp3: sfp3 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c103>;
+		tx-disable-gpios = <&sgpio_out 10 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in  3 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in  3 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in  1 1 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&aes {
+	status = "disabled"; /* Reserved by secure OS */
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	usart3: serial@200 {
+		pinctrl-0 = <&fc3_b_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c4: i2c@600 {
+		compatible = "microchip,sam9x60-i2c";
+		reg = <0x600 0x200>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&nic_clk>;
+		pinctrl-0 = <&fc4_b_pins>;
+		pinctrl-names = "default";
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		i2c-sda-hold-time-ns = <1500>;
+		status = "okay";
+	};
+};
+
+&gpio {
+	fc3_b_pins: fc3-b-pins {
+		/* RXD, TXD */
+		pins = "GPIO_52", "GPIO_53";
+		function = "fc3_b";
+	};
+
+	fc4_b_pins: fc4-b-pins {
+		/* SCL, SDA */
+		pins = "GPIO_57", "GPIO_58";
+		function = "fc4_b";
+	};
+
+	pps_out_pins: pps-out-pins {
+		/* 1pps output */
+		pins = "GPIO_38";
+		function = "ptpsync_3";
+	};
+
+	ptp_ext_pins: ptp-ext-pins {
+		/* 1pps input */
+		pins = "GPIO_39";
+		function = "ptpsync_4";
+	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1, LD */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
+		function = "sgpio_a";
+	};
+};
+
+&mdio1 {
+	status = "okay";
+};
+
+&phy0 {
+	status = "okay";
+};
+
+&phy1 {
+	status = "okay";
+};
+
+&port0 {
+	phy-handle = <&phy0>;
+	phy-mode = "gmii";
+	phys = <&serdes 0 CU(0)>;
+	status = "okay";
+};
+
+&port1 {
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+	phys = <&serdes 1 CU(1)>;
+	status = "okay";
+};
+
+&port2 {
+	sfp = <&sfp2>;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	phys = <&serdes 2 SERDES6G(0)>;
+	status = "okay";
+};
+
+&port3 {
+	sfp = <&sfp3>;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	phys = <&serdes 3 SERDES6G(1)>;
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>;
+	pinctrl-names = "default";
+	microchip,sgpio-port-ranges = <0 3>, <8 11>;
+	status = "okay";
+
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
+&switch {
+	pinctrl-0 = <&pps_out_pins>, <&ptp_ext_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/src/arm/microchip/lan966x.dtsi b/src/arm/microchip/lan966x.dtsi
new file mode 100644
index 0000000..05b73f7
--- /dev/null
+++ b/src/arm/microchip/lan966x.dtsi
@@ -0,0 +1,615 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x.dtsi - Device Tree Include file for Microchip LAN966 family SoC
+ *
+ * Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries
+ *
+ * Author: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/microchip,lan966x.h>
+
+/ {
+	model = "Microchip LAN966 family SoC";
+	compatible = "microchip,lan966";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			clock-frequency = <600000000>;
+			reg = <0x0>;
+		};
+	};
+
+	clocks {
+		sys_clk: sys_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <165625000>;
+		};
+
+		cpu_clk: cpu_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <600000000>;
+		};
+
+		ddr_clk: ddr_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <300000000>;
+		};
+
+		nic_clk: nic_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	clks: clock-controller@e00c00a8 {
+		compatible = "microchip,lan966x-gck";
+		#clock-cells = <1>;
+		clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>;
+		clock-names = "cpu", "ddr", "sys";
+		reg = <0xe00c00a8 0x38>, <0xe00c02cc 0x4>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <37500000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		udc: usb@200000 {
+			compatible = "microchip,lan9662-udc",
+				     "atmel,sama5d3-udc";
+			reg = <0x00200000 0x80000>,
+			      <0xe0808000 0x400>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks GCK_GATE_UDPHS>, <&nic_clk>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		switch: switch@e0000000 {
+			compatible = "microchip,lan966x-switch";
+			reg = <0xe0000000 0x0100000>,
+			      <0xe2000000 0x0800000>;
+			reg-names = "cpu", "gcb";
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "xtr", "fdma", "ana", "ptp",
+					  "ptp-ext";
+			resets = <&reset 0>;
+			reset-names = "switch";
+			status = "disabled";
+
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+
+				port5: port@5 {
+					reg = <5>;
+					status = "disabled";
+				};
+
+				port6: port@6 {
+					reg = <6>;
+					status = "disabled";
+				};
+
+				port7: port@7 {
+					reg = <7>;
+					status = "disabled";
+				};
+			};
+		};
+
+		otp: otp@e0021000 {
+			compatible = "microchip,lan9668-otpc", "microchip,lan9662-otpc";
+			reg = <0xe0021000 0x300>;
+		};
+
+		flx0: flexcom@e0040000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0040000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0040000 0x800>;
+			status = "disabled";
+
+			usart0: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi0: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		flx1: flexcom@e0044000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0044000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0044000 0x800>;
+			status = "disabled";
+
+			usart1: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(4)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi1: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(4)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(4)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		trng: rng@e0048000 {
+			compatible = "atmel,at91sam9g45-trng";
+			reg = <0xe0048000 0x100>;
+			clocks = <&nic_clk>;
+		};
+
+		aes: crypto@e004c000 {
+			compatible = "atmel,at91sam9g46-aes";
+			reg = <0xe004c000 0x100>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(13)>;
+			dma-names = "tx", "rx";
+			clocks = <&nic_clk>;
+			clock-names = "aes_clk";
+		};
+
+		flx2: flexcom@e0060000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0060000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0060000 0x800>;
+			status = "disabled";
+
+			usart2: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(6)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi2: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(6)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(6)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		flx3: flexcom@e0064000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0064000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0064000 0x800>;
+			status = "disabled";
+
+			usart3: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(8)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi3: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(8)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(8)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		dma0: dma-controller@e0068000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe0068000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&nic_clk>;
+			clock-names = "dma_clk";
+		};
+
+		sha: crypto@e006c000 {
+			compatible = "atmel,at91sam9g46-sha";
+			reg = <0xe006c000 0xec>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(14)>;
+			dma-names = "tx";
+			clocks = <&nic_clk>;
+			clock-names = "sha_clk";
+		};
+
+		flx4: flexcom@e0070000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0070000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0070000 0x800>;
+			status = "disabled";
+
+			usart4: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(10)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi4: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(10)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(10)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		timer0: timer@e008c000 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0xe008c000 0x400>;
+			clocks = <&nic_clk>;
+			clock-names = "timer";
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog: watchdog@e0090000 {
+			compatible = "snps,dw-wdt";
+			reg = <0xe0090000 0x1000>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&nic_clk>;
+			status = "disabled";
+		};
+
+		cpu_ctrl: syscon@e00c0000 {
+			compatible = "microchip,lan966x-cpu-syscon", "syscon";
+			reg = <0xe00c0000 0x350>;
+		};
+
+		can0: can@e081c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe081c000 0xfc>, <0x00100000 0x4000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&clks GCK_ID_MCAN0>, <&clks GCK_ID_MCAN0>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&clks GCK_ID_MCAN0>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can1: can@e0820000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0820000 0xfc>, <0x00100000 0x8000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&clks GCK_ID_MCAN1>, <&clks GCK_ID_MCAN1>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&clks GCK_ID_MCAN1>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x4000 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		reset: reset-controller@e200400c {
+			compatible = "microchip,lan966x-switch-reset";
+			reg = <0xe200400c 0x4>;
+			reg-names = "gcb";
+			#reset-cells = <1>;
+			cpu-syscon = <&cpu_ctrl>;
+		};
+
+		gpio: pinctrl@e2004064 {
+			compatible = "microchip,lan966x-pinctrl";
+			reg = <0xe2004064 0xb4>,
+			    <0xe2010024 0x138>;
+			resets = <&reset 0>;
+			reset-names = "switch";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&gpio 0 0 78>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+		};
+
+		mdio0: mdio@e2004118 {
+			compatible = "microchip,lan966x-miim";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe2004118 0x24>;
+			clocks = <&sys_clk>;
+			status = "disabled";
+		};
+
+		mdio1: mdio@e200413c {
+			compatible = "microchip,lan966x-miim";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe200413c 0x24>,
+			      <0xe2010020 0x4>;
+			clocks = <&sys_clk>;
+			status = "disabled";
+
+			phy0: ethernet-phy@1 {
+				reg = <1>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			phy1: ethernet-phy@2 {
+				reg = <2>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		sgpio: gpio@e2004190 {
+			compatible = "microchip,sparx5-sgpio";
+			reg = <0xe2004190 0x118>;
+			clocks = <&sys_clk>;
+			resets = <&reset 0>;
+			reset-names = "switch";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sgpio_in: gpio@0 {
+				compatible = "microchip,sparx5-sgpio-bank";
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <3>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+			};
+
+			sgpio_out: gpio@1 {
+				compatible = "microchip,sparx5-sgpio-bank";
+				reg = <1>;
+				gpio-controller;
+				#gpio-cells = <3>;
+			};
+		};
+
+		hwmon: hwmon@e2010180 {
+			compatible = "microchip,lan9668-hwmon";
+			reg = <0xe2010180 0xc>,
+			      <0xe20042a8 0xc>;
+			reg-names = "pvt", "fan";
+			clocks = <&sys_clk>;
+		};
+
+		serdes: serdes@e202c000 {
+			compatible = "microchip,lan966x-serdes";
+			reg = <0xe202c000 0x9c>,
+			      <0xe2004010 0x4>;
+			#phy-cells = <2>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@e8c11000 {
+			compatible = "arm,gic-400", "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			reg = <0xe8c11000 0x1000>,
+			      <0xe8c12000 0x2000>,
+			      <0xe8c14000 0x2000>,
+			      <0xe8c16000 0x2000>;
+		};
+	};
+};
diff --git a/src/arm/microchip/mpa1600.dts b/src/arm/microchip/mpa1600.dts
new file mode 100644
index 0000000..005c275
--- /dev/null
+++ b/src/arm/microchip/mpa1600.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * mpa1600.dts - Device Tree file for Phontech MPA 1600
+ *
+ *  Copyright (C) 2013 Joachim Eastwood <manabian@gmail.com>
+ */
+/dts-v1/;
+#include "at91rm9200.dtsi"
+
+/ {
+	model = "Phontech MPA 1600";
+	compatible = "phontech,mpa1600", "atmel,at91rm9200";
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			ssc0: ssc@fffd0000 {
+				status = "okay";
+			};
+
+			ssc1: ssc@fffd4000 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@300000 {
+			num-ports = <1>;
+			status = "okay";
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		monitor_mute {
+			label = "Monitor mute";
+			gpios = <&pioC 1 GPIO_ACTIVE_LOW>;
+			linux,code = <113>;
+		};
+	};
+};
diff --git a/src/arm/microchip/pm9g45.dts b/src/arm/microchip/pm9g45.dts
new file mode 100644
index 0000000..c349fd3
--- /dev/null
+++ b/src/arm/microchip/pm9g45.dts
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * pm9g45.dts - Device Tree file for Ronetix pm9g45 board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9g45.dtsi"
+
+/ {
+	model = "Ronetix pm9g45";
+	compatible = "ronetix,pm9g45", "atmel,at91sam9g45", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@70000000 {
+		reg = <0x70000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+		      clock-frequency = <32768>;
+		};
+
+		main_xtal {
+		      clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			pinctrl@fffff200 {
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOD 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				mmc {
+					pinctrl_board_mmc: mmc0-board {
+						atmel,pins =
+							<AT91_PIOD 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD6 gpio CD pin pull_up and deglitch */
+					};
+				};
+			};
+
+			tcb0: timer@fff7c000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			mmc0: mmc@fff80000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc
+					&pinctrl_mmc0_slot0_clk_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 6 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioD 3 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x1A0000>;
+						};
+
+						kernel@200000 {
+							label = "bareboxenv2";
+							reg = <0x200000 0x300000>;
+						};
+
+						kernel@500000 {
+							label = "root";
+							reg = <0x500000 0x400000>;
+						};
+
+						data@900000 {
+							label = "data";
+							reg = <0x900000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@700000 {
+			status = "okay";
+			num-ports = <2>;
+		};
+
+		usb1: ehci@800000 {
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "led0";
+			gpios = <&pioD 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "nand-disk";
+		};
+
+		led1 {
+			label = "led1";
+			gpios = <&pioD 31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		right {
+			label = "SW4";
+			gpios = <&pioE 7 GPIO_ACTIVE_LOW>;
+			linux,code = <106>;
+		};
+
+		up {
+			label = "SW3";
+			gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
+			linux,code = <103>;
+		};
+	};
+};
diff --git a/src/arm/microchip/sam9x60.dtsi b/src/arm/microchip/sam9x60.dtsi
new file mode 100644
index 0000000..73d570a1
--- /dev/null
+++ b/src/arm/microchip/sam9x60.dtsi
@@ -0,0 +1,1353 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sam9x60.dtsi - Device Tree Include file for Microchip SAM9X60 SoC
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Microchip SAM9X60 SoC";
+	compatible = "microchip,sam9x60";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x100000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usb0: gadget@500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "microchip,sam9x60-udc";
+			reg = <0x00500000 0x100000
+				0xf803c000 0x400>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			clock-names = "pclk", "hclk";
+			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			assigned-clock-rates = <480000000>;
+			status = "disabled";
+		};
+
+		usb1: ohci@600000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: ehci@700000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "usb_clk", "ehci_clk";
+			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			assigned-clock-rates = <480000000>;
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "microchip,sam9x60-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			microchip,sfr = <&sfr>;
+			reg = <0x10000000 0x60000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "microchip,sam9x60-nand-controller";
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		sdmmc0: sdio-host@80000000 {
+			compatible = "microchip,sam9x60-sdhci";
+			reg = <0x80000000 0x300>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
+			assigned-clock-rates = <100000000>;
+			status = "disabled";
+		};
+
+		sdmmc1: sdio-host@90000000 {
+			compatible = "microchip,sam9x60-sdhci";
+			reg = <0x90000000 0x300>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
+			assigned-clock-rates = <100000000>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			flx4: flexcom@f0000000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0000000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0000000 0x800>;
+				status = "disabled";
+
+				uart4: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(8))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(9))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi4: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(8))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(9))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c4: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(8))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(9))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx5: flexcom@f0004000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0004000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0004000 0x800>;
+				status = "disabled";
+
+				uart5: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(10))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi5: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(10))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c5: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(10))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			dma0: dma-controller@f0008000 {
+				compatible = "microchip,sam9x60-dma", "atmel,sama5d4-dma";
+				reg = <0xf0008000 0x1000>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				clock-names = "dma_clk";
+			};
+
+			ssc: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(38))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(39))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			qspi: spi@f0014000 {
+				compatible = "microchip,sam9x60-qspi";
+				reg = <0xf0014000 0x100>, <0x70000000 0x10000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(26))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(27))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_SYSTEM 19>;
+				clock-names = "pclk", "qspick";
+				atmel,pmc = <&pmc>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2s: i2s@f001c000 {
+				compatible = "microchip,sam9x60-i2smcc";
+				reg = <0xf001c000 0x100>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(36))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(37))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			flx11: flexcom@f0020000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0020000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0020000 0x800>;
+				status = "disabled";
+
+				uart11: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(22))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(23))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c11: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(22))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(23))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx12: flexcom@f0024000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0024000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0024000 0x800>;
+				status = "disabled";
+
+				uart12: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(24))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(25))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c12: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(24))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(25))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			pit64b: timer@f0028000 {
+				compatible = "microchip,sam9x60-pit64b";
+				reg = <0xf0028000 0x100>;
+				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>;
+				clock-names = "pclk", "gclk";
+			};
+
+			sha: crypto@f002c000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xf002c000 0x100>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(34))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+				clock-names = "sha_clk";
+			};
+
+			trng: trng@f0030000 {
+				compatible = "microchip,sam9x60-trng";
+				reg = <0xf0030000 0x100>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+			};
+
+			aes: crypto@f0034000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xf0034000 0x100>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(32))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(33))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				clock-names = "aes_clk";
+			};
+
+			tdes: crypto@f0038000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xf0038000 0x100>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(31))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(30))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+				clock-names = "tdes_clk";
+			};
+
+			classd: classd@f003c000 {
+				compatible = "atmel,sama5d2-classd";
+				reg = <0xf003c000 0x100>;
+				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(35))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			can0: can@f8000000 {
+				compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can";
+				reg = <0xf8000000 0x300>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			can1: can@f8004000 {
+				compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can";
+				reg = <0xf8004000 0x300>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			tcb0: timer@f8008000 {
+				compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf8008000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k 0>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			tcb1: timer@f800c000 {
+				compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf800c000 0x100>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&clk32k 0>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			flx6: flexcom@f8010000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8010000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8010000 0x800>;
+				status = "disabled";
+
+				uart6: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c6: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx7: flexcom@f8014000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8014000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8014000 0x800>;
+				status = "disabled";
+
+				uart7: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c7: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx8: flexcom@f8018000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8018000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8018000 0x800>;
+				status = "disabled";
+
+				uart8: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c8: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx0: flexcom@f801c000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf801c000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf801c000 0x800>;
+				status = "disabled";
+
+				uart0: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(0))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(1))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi0: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(0))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(1))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c0: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(0))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(1))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx1: flexcom@f8020000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8020000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8020000 0x800>;
+				status = "disabled";
+
+				uart1: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(2))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(3))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi1: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(2))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(3))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c1: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(2))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(3))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx2: flexcom@f8024000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8024000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8024000 0x800>;
+				status = "disabled";
+
+				uart2: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(4))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(5))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi2: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(4))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(5))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c2: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(4))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(5))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx3: flexcom@f8028000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8028000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8028000 0x800>;
+				status = "disabled";
+
+				uart3: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(6))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(7))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi3: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(6))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(7))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c3: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(6))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(7))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			macb0: ethernet@f802c000 {
+				compatible = "cdns,sam9x60-macb", "cdns,macb";
+				reg = <0xf802c000 0x1000>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			macb1: ethernet@f8030000 {
+				compatible = "cdns,sam9x60-macb", "cdns,macb";
+				reg = <0xf8030000 0x1000>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			pwm0: pwm@f8034000 {
+				compatible = "microchip,sam9x60-pwm";
+				reg = <0xf8034000 0x300>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			hlcdc: hlcdc@f8038000 {
+				compatible = "microchip,sam9x60-hlcdc";
+				reg = <0xf8038000 0x4000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_GCK 25>, <&clk32k 1>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				assigned-clocks = <&pmc PMC_TYPE_GCK 25>;
+				assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					#pwm-cells = <3>;
+				};
+			};
+
+			flx9: flexcom@f8040000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8040000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8040000 0x800>;
+				status = "disabled";
+
+				uart9: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c9: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx10: flexcom@f8044000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8044000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8044000 0x800>;
+				status = "disabled";
+
+				uart10: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(21))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c10: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(21))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			isi: isi@f8048000 {
+				compatible = "microchip,sam9x60-isi", "atmel,at91sam9g45-isi";
+				reg = <0xf8048000 0x100>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			adc: adc@f804c000 {
+				compatible = "microchip,sam9x60-adc", "atmel,sama5d2-adc";
+				reg = <0xf804c000 0x100>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+				clock-names = "adc_clk";
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(40))>;
+				dma-names = "rx";
+				atmel,min-sample-rate-hz = <200000>;
+				atmel,max-sample-rate-hz = <20000000>;
+				atmel,startup-time-ms = <4>;
+				atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			sfr: sfr@f8050000 {
+				compatible = "microchip,sam9x60-sfr", "syscon";
+				reg = <0xf8050000 0x100>;
+			};
+
+			matrix: matrix@ffffde00 {
+				compatible = "microchip,sam9x60-matrix", "atmel,at91sam9x5-matrix", "syscon";
+				reg = <0xffffde00 0x200>;
+			};
+
+			pmecc: ecc-engine@ffffe000 {
+				compatible = "microchip,sam9x60-pmecc", "atmel,at91sam9g45-pmecc";
+				reg = <0xffffe000 0x300>,
+				      <0xffffe600 0x100>;
+			};
+
+			mpddrc: mpddrc@ffffe800 {
+				compatible = "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc";
+				reg = <0xffffe800 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			smc: smc@ffffea00 {
+				compatible = "microchip,sam9x60-smc", "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffea00 0x100>;
+			};
+
+			aic: interrupt-controller@fffff100 {
+				compatible = "microchip,sam9x60-aic";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0xfffff100 0x100>;
+				atmel,external-irqs = <31>;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(28))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(29))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pinctrl: pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				/* mux-mask corresponding to sam9x60 SoC in TFBGA228L package */
+				atmel,mux-mask = <
+						 /*	A	B	C	*/
+						 0xffffffff 0xffe03fff 0xef00019d	/* pioA */
+						 0x03ffffff 0x02fc7e7f 0x00780000	/* pioB */
+						 0xffffffff 0xffffffff 0xf83fffff	/* pioC */
+						 0x003fffff 0x003f8000 0x00000000	/* pioD */
+						 >;
+
+				pioA: gpio@fffff400 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <26>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <22>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+				};
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "microchip,sam9x60-pmc", "syscon";
+				reg = <0xfffffc00 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+				clock-names = "td_slck", "md_slck", "main_xtal";
+			};
+
+			reset_controller: reset-controller@fffffe00 {
+				compatible = "microchip,sam9x60-rstc";
+				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k 0>;
+			};
+
+			shutdown_controller: poweroff@fffffe10 {
+				compatible = "microchip,sam9x60-shdwc";
+				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,wakeup-rtc-timer;
+				atmel,wakeup-rtt-timer;
+				status = "disabled";
+			};
+
+			rtt: rtc@fffffe20 {
+				compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
+				reg = <0xfffffe20 0x20>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k 0>;
+			};
+
+			pit: timer@fffffe40 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			clk32k: clock-controller@fffffe50 {
+				compatible = "microchip,sam9x60-sckc";
+				reg = <0xfffffe50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <1>;
+			};
+
+			gpbr: syscon@fffffe60 {
+				compatible = "microchip,sam9x60-gpbr", "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffe60 0x10>;
+			};
+
+			rtc: rtc@fffffea8 {
+				compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc";
+				reg = <0xfffffea8 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k 0>;
+			};
+
+			watchdog: watchdog@ffffff80 {
+				compatible = "microchip,sam9x60-wdt";
+				reg = <0xffffff80 0x24>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k 0>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/sama5d2-pinfunc.h b/src/arm/microchip/sama5d2-pinfunc.h
new file mode 100644
index 0000000..28a2e45
--- /dev/null
+++ b/src/arm/microchip/sama5d2-pinfunc.h
@@ -0,0 +1,881 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#define PINMUX_PIN(no, func, ioset) \
+(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20))
+
+#define PIN_PA0				0
+#define PIN_PA0__GPIO			PINMUX_PIN(PIN_PA0, 0, 0)
+#define PIN_PA0__SDMMC0_CK		PINMUX_PIN(PIN_PA0, 1, 1)
+#define PIN_PA0__QSPI0_SCK		PINMUX_PIN(PIN_PA0, 2, 1)
+#define PIN_PA0__D0			PINMUX_PIN(PIN_PA0, 6, 2)
+#define PIN_PA1				1
+#define PIN_PA1__GPIO			PINMUX_PIN(PIN_PA1, 0, 0)
+#define PIN_PA1__SDMMC0_CMD		PINMUX_PIN(PIN_PA1, 1, 1)
+#define PIN_PA1__QSPI0_CS		PINMUX_PIN(PIN_PA1, 2, 1)
+#define PIN_PA1__D1			PINMUX_PIN(PIN_PA1, 6, 2)
+#define PIN_PA2				2
+#define PIN_PA2__GPIO			PINMUX_PIN(PIN_PA2, 0, 0)
+#define PIN_PA2__SDMMC0_DAT0		PINMUX_PIN(PIN_PA2, 1, 1)
+#define PIN_PA2__QSPI0_IO0		PINMUX_PIN(PIN_PA2, 2, 1)
+#define PIN_PA2__D2			PINMUX_PIN(PIN_PA2, 6, 2)
+#define PIN_PA3				3
+#define PIN_PA3__GPIO			PINMUX_PIN(PIN_PA3, 0, 0)
+#define PIN_PA3__SDMMC0_DAT1		PINMUX_PIN(PIN_PA3, 1, 1)
+#define PIN_PA3__QSPI0_IO1		PINMUX_PIN(PIN_PA3, 2, 1)
+#define PIN_PA3__D3			PINMUX_PIN(PIN_PA3, 6, 2)
+#define PIN_PA4				4
+#define PIN_PA4__GPIO			PINMUX_PIN(PIN_PA4, 0, 0)
+#define PIN_PA4__SDMMC0_DAT2		PINMUX_PIN(PIN_PA4, 1, 1)
+#define PIN_PA4__QSPI0_IO2		PINMUX_PIN(PIN_PA4, 2, 1)
+#define PIN_PA4__D4			PINMUX_PIN(PIN_PA4, 6, 2)
+#define PIN_PA5				5
+#define PIN_PA5__GPIO			PINMUX_PIN(PIN_PA5, 0, 0)
+#define PIN_PA5__SDMMC0_DAT3		PINMUX_PIN(PIN_PA5, 1, 1)
+#define PIN_PA5__QSPI0_IO3		PINMUX_PIN(PIN_PA5, 2, 1)
+#define PIN_PA5__D5			PINMUX_PIN(PIN_PA5, 6, 2)
+#define PIN_PA6				6
+#define PIN_PA6__GPIO			PINMUX_PIN(PIN_PA6, 0, 0)
+#define PIN_PA6__SDMMC0_DAT4		PINMUX_PIN(PIN_PA6, 1, 1)
+#define PIN_PA6__QSPI1_SCK		PINMUX_PIN(PIN_PA6, 2, 1)
+#define PIN_PA6__TIOA5			PINMUX_PIN(PIN_PA6, 4, 1)
+#define PIN_PA6__FLEXCOM2_IO0		PINMUX_PIN(PIN_PA6, 5, 1)
+#define PIN_PA6__D6			PINMUX_PIN(PIN_PA6, 6, 2)
+#define PIN_PA7				7
+#define PIN_PA7__GPIO			PINMUX_PIN(PIN_PA7, 0, 0)
+#define PIN_PA7__SDMMC0_DAT5		PINMUX_PIN(PIN_PA7, 1, 1)
+#define PIN_PA7__QSPI1_IO0		PINMUX_PIN(PIN_PA7, 2, 1)
+#define PIN_PA7__TIOB5			PINMUX_PIN(PIN_PA7, 4, 1)
+#define PIN_PA7__FLEXCOM2_IO1		PINMUX_PIN(PIN_PA7, 5, 1)
+#define PIN_PA7__D7			PINMUX_PIN(PIN_PA7, 6, 2)
+#define PIN_PA8				8
+#define PIN_PA8__GPIO			PINMUX_PIN(PIN_PA8, 0, 0)
+#define PIN_PA8__SDMMC0_DAT6		PINMUX_PIN(PIN_PA8, 1, 1)
+#define PIN_PA8__QSPI1_IO1		PINMUX_PIN(PIN_PA8, 2, 1)
+#define PIN_PA8__TCLK5			PINMUX_PIN(PIN_PA8, 4, 1)
+#define PIN_PA8__FLEXCOM2_IO2		PINMUX_PIN(PIN_PA8, 5, 1)
+#define PIN_PA8__NWE_NANDWE		PINMUX_PIN(PIN_PA8, 6, 2)
+#define PIN_PA9				9
+#define PIN_PA9__GPIO			PINMUX_PIN(PIN_PA9, 0, 0)
+#define PIN_PA9__SDMMC0_DAT7		PINMUX_PIN(PIN_PA9, 1, 1)
+#define PIN_PA9__QSPI1_IO2		PINMUX_PIN(PIN_PA9, 2, 1)
+#define PIN_PA9__TIOA4			PINMUX_PIN(PIN_PA9, 4, 1)
+#define PIN_PA9__FLEXCOM2_IO3		PINMUX_PIN(PIN_PA9, 5, 1)
+#define PIN_PA9__NCS3			PINMUX_PIN(PIN_PA9, 6, 2)
+#define PIN_PA10			10
+#define PIN_PA10__GPIO			PINMUX_PIN(PIN_PA10, 0, 0)
+#define PIN_PA10__SDMMC0_RSTN		PINMUX_PIN(PIN_PA10, 1, 1)
+#define PIN_PA10__QSPI1_IO3		PINMUX_PIN(PIN_PA10, 2, 1)
+#define PIN_PA10__TIOB4			PINMUX_PIN(PIN_PA10, 4, 1)
+#define PIN_PA10__FLEXCOM2_IO4		PINMUX_PIN(PIN_PA10, 5, 1)
+#define PIN_PA10__A21_NANDALE		PINMUX_PIN(PIN_PA10, 6, 2)
+#define PIN_PA11			11
+#define PIN_PA11__GPIO			PINMUX_PIN(PIN_PA11, 0, 0)
+#define PIN_PA11__SDMMC0_VDDSEL		PINMUX_PIN(PIN_PA11, 1, 1)
+#define PIN_PA11__QSPI1_CS		PINMUX_PIN(PIN_PA11, 2, 1)
+#define PIN_PA11__TCLK4			PINMUX_PIN(PIN_PA11, 4, 1)
+#define PIN_PA11__A22_NANDCLE		PINMUX_PIN(PIN_PA11, 6, 2)
+#define PIN_PA12			12
+#define PIN_PA12__GPIO			PINMUX_PIN(PIN_PA12, 0, 0)
+#define PIN_PA12__SDMMC0_WP		PINMUX_PIN(PIN_PA12, 1, 1)
+#define PIN_PA12__IRQ			PINMUX_PIN(PIN_PA12, 2, 1)
+#define PIN_PA12__NRD_NANDOE		PINMUX_PIN(PIN_PA12, 6, 2)
+#define PIN_PA13			13
+#define PIN_PA13__GPIO			PINMUX_PIN(PIN_PA13, 0, 0)
+#define PIN_PA13__SDMMC0_CD		PINMUX_PIN(PIN_PA13, 1, 1)
+#define PIN_PA13__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA13, 5, 1)
+#define PIN_PA13__D8			PINMUX_PIN(PIN_PA13, 6, 2)
+#define PIN_PA14			14
+#define PIN_PA14__GPIO			PINMUX_PIN(PIN_PA14, 0, 0)
+#define PIN_PA14__SPI0_SPCK		PINMUX_PIN(PIN_PA14, 1, 1)
+#define PIN_PA14__TK1			PINMUX_PIN(PIN_PA14, 2, 1)
+#define PIN_PA14__QSPI0_SCK		PINMUX_PIN(PIN_PA14, 3, 2)
+#define PIN_PA14__I2SC1_MCK		PINMUX_PIN(PIN_PA14, 4, 2)
+#define PIN_PA14__FLEXCOM3_IO2		PINMUX_PIN(PIN_PA14, 5, 1)
+#define PIN_PA14__D9			PINMUX_PIN(PIN_PA14, 6, 2)
+#define PIN_PA15			15
+#define PIN_PA15__GPIO			PINMUX_PIN(PIN_PA15, 0, 0)
+#define PIN_PA15__SPI0_MOSI		PINMUX_PIN(PIN_PA15, 1, 1)
+#define PIN_PA15__TF1			PINMUX_PIN(PIN_PA15, 2, 1)
+#define PIN_PA15__QSPI0_CS		PINMUX_PIN(PIN_PA15, 3, 2)
+#define PIN_PA15__I2SC1_CK		PINMUX_PIN(PIN_PA15, 4, 2)
+#define PIN_PA15__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA15, 5, 1)
+#define PIN_PA15__D10			PINMUX_PIN(PIN_PA15, 6, 2)
+#define PIN_PA16			16
+#define PIN_PA16__GPIO			PINMUX_PIN(PIN_PA16, 0, 0)
+#define PIN_PA16__SPI0_MISO		PINMUX_PIN(PIN_PA16, 1, 1)
+#define PIN_PA16__TD1			PINMUX_PIN(PIN_PA16, 2, 1)
+#define PIN_PA16__QSPI0_IO0		PINMUX_PIN(PIN_PA16, 3, 2)
+#define PIN_PA16__I2SC1_WS		PINMUX_PIN(PIN_PA16, 4, 2)
+#define PIN_PA16__FLEXCOM3_IO3		PINMUX_PIN(PIN_PA16, 5, 1)
+#define PIN_PA16__D11			PINMUX_PIN(PIN_PA16, 6, 2)
+#define PIN_PA17			17
+#define PIN_PA17__GPIO			PINMUX_PIN(PIN_PA17, 0, 0)
+#define PIN_PA17__SPI0_NPCS0		PINMUX_PIN(PIN_PA17, 1, 1)
+#define PIN_PA17__RD1			PINMUX_PIN(PIN_PA17, 2, 1)
+#define PIN_PA17__QSPI0_IO1		PINMUX_PIN(PIN_PA17, 3, 2)
+#define PIN_PA17__I2SC1_DI0		PINMUX_PIN(PIN_PA17, 4, 2)
+#define PIN_PA17__FLEXCOM3_IO4		PINMUX_PIN(PIN_PA17, 5, 1)
+#define PIN_PA17__D12			PINMUX_PIN(PIN_PA17, 6, 2)
+#define PIN_PA18			18
+#define PIN_PA18__GPIO			PINMUX_PIN(PIN_PA18, 0, 0)
+#define PIN_PA18__SPI0_NPCS1		PINMUX_PIN(PIN_PA18, 1, 1)
+#define PIN_PA18__RK1			PINMUX_PIN(PIN_PA18, 2, 1)
+#define PIN_PA18__QSPI0_IO2		PINMUX_PIN(PIN_PA18, 3, 2)
+#define PIN_PA18__I2SC1_DO0		PINMUX_PIN(PIN_PA18, 4, 2)
+#define PIN_PA18__SDMMC1_DAT0		PINMUX_PIN(PIN_PA18, 5, 1)
+#define PIN_PA18__D13			PINMUX_PIN(PIN_PA18, 6, 2)
+#define PIN_PA19			19
+#define PIN_PA19__GPIO			PINMUX_PIN(PIN_PA19, 0, 0)
+#define PIN_PA19__SPI0_NPCS2		PINMUX_PIN(PIN_PA19, 1, 1)
+#define PIN_PA19__RF1			PINMUX_PIN(PIN_PA19, 2, 1)
+#define PIN_PA19__QSPI0_IO3		PINMUX_PIN(PIN_PA19, 3, 2)
+#define PIN_PA19__TIOA0			PINMUX_PIN(PIN_PA19, 4, 1)
+#define PIN_PA19__SDMMC1_DAT1		PINMUX_PIN(PIN_PA19, 5, 1)
+#define PIN_PA19__D14			PINMUX_PIN(PIN_PA19, 6, 2)
+#define PIN_PA20			20
+#define PIN_PA20__GPIO			PINMUX_PIN(PIN_PA20, 0, 0)
+#define PIN_PA20__SPI0_NPCS3		PINMUX_PIN(PIN_PA20, 1, 1)
+#define PIN_PA20__TIOB0			PINMUX_PIN(PIN_PA20, 4, 1)
+#define PIN_PA20__SDMMC1_DAT2		PINMUX_PIN(PIN_PA20, 5, 1)
+#define PIN_PA20__D15			PINMUX_PIN(PIN_PA20, 6, 2)
+#define PIN_PA21			21
+#define PIN_PA21__GPIO			PINMUX_PIN(PIN_PA21, 0, 0)
+#define PIN_PA21__IRQ			PINMUX_PIN(PIN_PA21, 1, 2)
+#define PIN_PA21__PCK2			PINMUX_PIN(PIN_PA21, 2, 3)
+#define PIN_PA21__TCLK0			PINMUX_PIN(PIN_PA21, 4, 1)
+#define PIN_PA21__SDMMC1_DAT3		PINMUX_PIN(PIN_PA21, 5, 1)
+#define PIN_PA21__NANDRDY		PINMUX_PIN(PIN_PA21, 6, 2)
+#define PIN_PA22			22
+#define PIN_PA22__GPIO			PINMUX_PIN(PIN_PA22, 0, 0)
+#define PIN_PA22__FLEXCOM1_IO2		PINMUX_PIN(PIN_PA22, 1, 1)
+#define PIN_PA22__D0			PINMUX_PIN(PIN_PA22, 2, 1)
+#define PIN_PA22__TCK			PINMUX_PIN(PIN_PA22, 3, 4)
+#define PIN_PA22__SPI1_SPCK		PINMUX_PIN(PIN_PA22, 4, 2)
+#define PIN_PA22__SDMMC1_CK		PINMUX_PIN(PIN_PA22, 5, 1)
+#define PIN_PA22__QSPI0_SCK		PINMUX_PIN(PIN_PA22, 6, 3)
+#define PIN_PA23			23
+#define PIN_PA23__GPIO			PINMUX_PIN(PIN_PA23, 0, 0)
+#define PIN_PA23__FLEXCOM1_IO1		PINMUX_PIN(PIN_PA23, 1, 1)
+#define PIN_PA23__D1			PINMUX_PIN(PIN_PA23, 2, 1)
+#define PIN_PA23__TDI			PINMUX_PIN(PIN_PA23, 3, 4)
+#define PIN_PA23__SPI1_MOSI		PINMUX_PIN(PIN_PA23, 4, 2)
+#define PIN_PA23__QSPI0_CS		PINMUX_PIN(PIN_PA23, 6, 3)
+#define PIN_PA24			24
+#define PIN_PA24__GPIO			PINMUX_PIN(PIN_PA24, 0, 0)
+#define PIN_PA24__FLEXCOM1_IO0		PINMUX_PIN(PIN_PA24, 1, 1)
+#define PIN_PA24__D2			PINMUX_PIN(PIN_PA24, 2, 1)
+#define PIN_PA24__TDO			PINMUX_PIN(PIN_PA24, 3, 4)
+#define PIN_PA24__SPI1_MISO		PINMUX_PIN(PIN_PA24, 4, 2)
+#define PIN_PA24__QSPI0_IO0		PINMUX_PIN(PIN_PA24, 6, 3)
+#define PIN_PA25			25
+#define PIN_PA25__GPIO			PINMUX_PIN(PIN_PA25, 0, 0)
+#define PIN_PA25__FLEXCOM1_IO3		PINMUX_PIN(PIN_PA25, 1, 1)
+#define PIN_PA25__D3			PINMUX_PIN(PIN_PA25, 2, 1)
+#define PIN_PA25__TMS			PINMUX_PIN(PIN_PA25, 3, 4)
+#define PIN_PA25__SPI1_NPCS0		PINMUX_PIN(PIN_PA25, 4, 2)
+#define PIN_PA25__QSPI0_IO1		PINMUX_PIN(PIN_PA25, 6, 3)
+#define PIN_PA26			26
+#define PIN_PA26__GPIO			PINMUX_PIN(PIN_PA26, 0, 0)
+#define PIN_PA26__FLEXCOM1_IO4		PINMUX_PIN(PIN_PA26, 1, 1)
+#define PIN_PA26__D4			PINMUX_PIN(PIN_PA26, 2, 1)
+#define PIN_PA26__NTRST			PINMUX_PIN(PIN_PA26, 3, 4)
+#define PIN_PA26__SPI1_NPCS1		PINMUX_PIN(PIN_PA26, 4, 2)
+#define PIN_PA26__QSPI0_IO2		PINMUX_PIN(PIN_PA26, 6, 3)
+#define PIN_PA27			27
+#define PIN_PA27__GPIO			PINMUX_PIN(PIN_PA27, 0, 0)
+#define PIN_PA27__TIOA1			PINMUX_PIN(PIN_PA27, 1, 2)
+#define PIN_PA27__D5			PINMUX_PIN(PIN_PA27, 2, 1)
+#define PIN_PA27__SPI0_NPCS2		PINMUX_PIN(PIN_PA27, 3, 2)
+#define PIN_PA27__SPI1_NPCS2		PINMUX_PIN(PIN_PA27, 4, 2)
+#define PIN_PA27__SDMMC1_RSTN		PINMUX_PIN(PIN_PA27, 5, 1)
+#define PIN_PA27__QSPI0_IO3		PINMUX_PIN(PIN_PA27, 6, 3)
+#define PIN_PA28			28
+#define PIN_PA28__GPIO			PINMUX_PIN(PIN_PA28, 0, 0)
+#define PIN_PA28__TIOB1			PINMUX_PIN(PIN_PA28, 1, 2)
+#define PIN_PA28__D6			PINMUX_PIN(PIN_PA28, 2, 1)
+#define PIN_PA28__SPI0_NPCS3		PINMUX_PIN(PIN_PA28, 3, 2)
+#define PIN_PA28__SPI1_NPCS3		PINMUX_PIN(PIN_PA28, 4, 2)
+#define PIN_PA28__SDMMC1_CMD		PINMUX_PIN(PIN_PA28, 5, 1)
+#define PIN_PA28__CLASSD_L0		PINMUX_PIN(PIN_PA28, 6, 1)
+#define PIN_PA29			29
+#define PIN_PA29__GPIO			PINMUX_PIN(PIN_PA29, 0, 0)
+#define PIN_PA29__TCLK1			PINMUX_PIN(PIN_PA29, 1, 2)
+#define PIN_PA29__D7			PINMUX_PIN(PIN_PA29, 2, 1)
+#define PIN_PA29__SPI0_NPCS1		PINMUX_PIN(PIN_PA29, 3, 2)
+#define PIN_PA29__SDMMC1_WP		PINMUX_PIN(PIN_PA29, 5, 1)
+#define PIN_PA29__CLASSD_L1		PINMUX_PIN(PIN_PA29, 6, 1)
+#define PIN_PA30			30
+#define PIN_PA30__GPIO			PINMUX_PIN(PIN_PA30, 0, 0)
+#define PIN_PA30__NWE_NANDWE		PINMUX_PIN(PIN_PA30, 2, 1)
+#define PIN_PA30__SPI0_NPCS0		PINMUX_PIN(PIN_PA30, 3, 2)
+#define PIN_PA30__PWMH0			PINMUX_PIN(PIN_PA30, 4, 1)
+#define PIN_PA30__SDMMC1_CD		PINMUX_PIN(PIN_PA30, 5, 1)
+#define PIN_PA30__CLASSD_L2		PINMUX_PIN(PIN_PA30, 6, 1)
+#define PIN_PA31			31
+#define PIN_PA31__GPIO			PINMUX_PIN(PIN_PA31, 0, 0)
+#define PIN_PA31__NCS3			PINMUX_PIN(PIN_PA31, 2, 1)
+#define PIN_PA31__SPI0_MISO		PINMUX_PIN(PIN_PA31, 3, 2)
+#define PIN_PA31__PWML0			PINMUX_PIN(PIN_PA31, 4, 1)
+#define PIN_PA31__CLASSD_L3		PINMUX_PIN(PIN_PA31, 6, 1)
+#define PIN_PB0				32
+#define PIN_PB0__GPIO			PINMUX_PIN(PIN_PB0, 0, 0)
+#define PIN_PB0__A21_NANDALE		PINMUX_PIN(PIN_PB0, 2, 1)
+#define PIN_PB0__SPI0_MOSI		PINMUX_PIN(PIN_PB0, 3, 2)
+#define PIN_PB0__PWMH1			PINMUX_PIN(PIN_PB0, 4, 1)
+#define PIN_PB1				33
+#define PIN_PB1__GPIO			PINMUX_PIN(PIN_PB1, 0, 0)
+#define PIN_PB1__A22_NANDCLE		PINMUX_PIN(PIN_PB1, 2, 1)
+#define PIN_PB1__SPI0_SPCK		PINMUX_PIN(PIN_PB1, 3, 2)
+#define PIN_PB1__PWML1			PINMUX_PIN(PIN_PB1, 4, 1)
+#define PIN_PB1__CLASSD_R0		PINMUX_PIN(PIN_PB1, 6, 1)
+#define PIN_PB2				34
+#define PIN_PB2__GPIO			PINMUX_PIN(PIN_PB2, 0, 0)
+#define PIN_PB2__NRD_NANDOE		PINMUX_PIN(PIN_PB2, 2, 1)
+#define PIN_PB2__PWMFI0			PINMUX_PIN(PIN_PB2, 4, 1)
+#define PIN_PB2__CLASSD_R1		PINMUX_PIN(PIN_PB2, 6, 1)
+#define PIN_PB3				35
+#define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
+#define PIN_PB3__URXD4			PINMUX_PIN(PIN_PB3, 1, 1)
+#define PIN_PB3__D8			PINMUX_PIN(PIN_PB3, 2, 1)
+#define PIN_PB3__IRQ			PINMUX_PIN(PIN_PB3, 3, 3)
+#define PIN_PB3__PWMEXTRG0		PINMUX_PIN(PIN_PB3, 4, 1)
+#define PIN_PB3__CLASSD_R2		PINMUX_PIN(PIN_PB3, 6, 1)
+#define PIN_PB4				36
+#define PIN_PB4__GPIO			PINMUX_PIN(PIN_PB4, 0, 0)
+#define PIN_PB4__UTXD4			PINMUX_PIN(PIN_PB4, 1, 1)
+#define PIN_PB4__D9			PINMUX_PIN(PIN_PB4, 2, 1)
+#define PIN_PB4__FIQ			PINMUX_PIN(PIN_PB4, 3, 4)
+#define PIN_PB4__CLASSD_R3		PINMUX_PIN(PIN_PB4, 6, 1)
+#define PIN_PB5				37
+#define PIN_PB5__GPIO			PINMUX_PIN(PIN_PB5, 0, 0)
+#define PIN_PB5__TCLK2			PINMUX_PIN(PIN_PB5, 1, 1)
+#define PIN_PB5__D10			PINMUX_PIN(PIN_PB5, 2, 1)
+#define PIN_PB5__PWMH2			PINMUX_PIN(PIN_PB5, 3, 1)
+#define PIN_PB5__QSPI1_SCK		PINMUX_PIN(PIN_PB5, 4, 2)
+#define PIN_PB5__GTSUCOMP		PINMUX_PIN(PIN_PB5, 6, 3)
+#define PIN_PB6				38
+#define PIN_PB6__GPIO			PINMUX_PIN(PIN_PB6, 0, 0)
+#define PIN_PB6__TIOA2			PINMUX_PIN(PIN_PB6, 1, 1)
+#define PIN_PB6__D11			PINMUX_PIN(PIN_PB6, 2, 1)
+#define PIN_PB6__PWML2			PINMUX_PIN(PIN_PB6, 3, 1)
+#define PIN_PB6__QSPI1_CS		PINMUX_PIN(PIN_PB6, 4, 2)
+#define PIN_PB6__GTXER			PINMUX_PIN(PIN_PB6, 6, 3)
+#define PIN_PB7				39
+#define PIN_PB7__GPIO			PINMUX_PIN(PIN_PB7, 0, 0)
+#define PIN_PB7__TIOB2			PINMUX_PIN(PIN_PB7, 1, 1)
+#define PIN_PB7__D12			PINMUX_PIN(PIN_PB7, 2, 1)
+#define PIN_PB7__PWMH3			PINMUX_PIN(PIN_PB7, 3, 1)
+#define PIN_PB7__QSPI1_IO0		PINMUX_PIN(PIN_PB7, 4, 2)
+#define PIN_PB7__GRXCK			PINMUX_PIN(PIN_PB7, 6, 3)
+#define PIN_PB8				40
+#define PIN_PB8__GPIO			PINMUX_PIN(PIN_PB8, 0, 0)
+#define PIN_PB8__TCLK3			PINMUX_PIN(PIN_PB8, 1, 1)
+#define PIN_PB8__D13			PINMUX_PIN(PIN_PB8, 2, 1)
+#define PIN_PB8__PWML3			PINMUX_PIN(PIN_PB8, 3, 1)
+#define PIN_PB8__QSPI1_IO1		PINMUX_PIN(PIN_PB8, 4, 2)
+#define PIN_PB8__GCRS			PINMUX_PIN(PIN_PB8, 6, 3)
+#define PIN_PB9				41
+#define PIN_PB9__GPIO			PINMUX_PIN(PIN_PB9, 0, 0)
+#define PIN_PB9__TIOA3			PINMUX_PIN(PIN_PB9, 1, 1)
+#define PIN_PB9__D14			PINMUX_PIN(PIN_PB9, 2, 1)
+#define PIN_PB9__PWMFI1			PINMUX_PIN(PIN_PB9, 3, 1)
+#define PIN_PB9__QSPI1_IO2		PINMUX_PIN(PIN_PB9, 4, 2)
+#define PIN_PB9__GCOL			PINMUX_PIN(PIN_PB9, 6, 3)
+#define PIN_PB10			42
+#define PIN_PB10__GPIO			PINMUX_PIN(PIN_PB10, 0, 0)
+#define PIN_PB10__TIOB3			PINMUX_PIN(PIN_PB10, 1, 1)
+#define PIN_PB10__D15			PINMUX_PIN(PIN_PB10, 2, 1)
+#define PIN_PB10__PWMEXTRG1		PINMUX_PIN(PIN_PB10, 3, 1)
+#define PIN_PB10__QSPI1_IO3		PINMUX_PIN(PIN_PB10, 4, 2)
+#define PIN_PB10__GRX2			PINMUX_PIN(PIN_PB10, 6, 3)
+#define PIN_PB11			43
+#define PIN_PB11__GPIO			PINMUX_PIN(PIN_PB11, 0, 0)
+#define PIN_PB11__LCDDAT0		PINMUX_PIN(PIN_PB11, 1, 1)
+#define PIN_PB11__A0_NBS0		PINMUX_PIN(PIN_PB11, 2, 1)
+#define PIN_PB11__URXD3			PINMUX_PIN(PIN_PB11, 3, 3)
+#define PIN_PB11__PDMIC_DAT		PINMUX_PIN(PIN_PB11, 4, 2)
+#define PIN_PB11__GRX3			PINMUX_PIN(PIN_PB11, 6, 3)
+#define PIN_PB12			44
+#define PIN_PB12__GPIO			PINMUX_PIN(PIN_PB12, 0, 0)
+#define PIN_PB12__LCDDAT1		PINMUX_PIN(PIN_PB12, 1, 1)
+#define PIN_PB12__A1			PINMUX_PIN(PIN_PB12, 2, 1)
+#define PIN_PB12__UTXD3			PINMUX_PIN(PIN_PB12, 3, 3)
+#define PIN_PB12__PDMIC_CLK		PINMUX_PIN(PIN_PB12, 4, 2)
+#define PIN_PB12__GTX2			PINMUX_PIN(PIN_PB12, 6, 3)
+#define PIN_PB13			45
+#define PIN_PB13__GPIO			PINMUX_PIN(PIN_PB13, 0, 0)
+#define PIN_PB13__LCDDAT2		PINMUX_PIN(PIN_PB13, 1, 1)
+#define PIN_PB13__A2			PINMUX_PIN(PIN_PB13, 2, 1)
+#define PIN_PB13__PCK1			PINMUX_PIN(PIN_PB13, 3, 3)
+#define PIN_PB13__GTX3			PINMUX_PIN(PIN_PB13, 6, 3)
+#define PIN_PB14			46
+#define PIN_PB14__GPIO			PINMUX_PIN(PIN_PB14, 0, 0)
+#define PIN_PB14__LCDDAT3		PINMUX_PIN(PIN_PB14, 1, 1)
+#define PIN_PB14__A3			PINMUX_PIN(PIN_PB14, 2, 1)
+#define PIN_PB14__TK1			PINMUX_PIN(PIN_PB14, 3, 2)
+#define PIN_PB14__I2SC1_MCK		PINMUX_PIN(PIN_PB14, 4, 1)
+#define PIN_PB14__QSPI1_SCK		PINMUX_PIN(PIN_PB14, 5, 3)
+#define PIN_PB14__GTXCK			PINMUX_PIN(PIN_PB14, 6, 3)
+#define PIN_PB15			47
+#define PIN_PB15__GPIO			PINMUX_PIN(PIN_PB15, 0, 0)
+#define PIN_PB15__LCDDAT4		PINMUX_PIN(PIN_PB15, 1, 1)
+#define PIN_PB15__A4			PINMUX_PIN(PIN_PB15, 2, 1)
+#define PIN_PB15__TF1			PINMUX_PIN(PIN_PB15, 3, 2)
+#define PIN_PB15__I2SC1_CK		PINMUX_PIN(PIN_PB15, 4, 1)
+#define PIN_PB15__QSPI1_CS		PINMUX_PIN(PIN_PB15, 5, 3)
+#define PIN_PB15__GTXEN			PINMUX_PIN(PIN_PB15, 6, 3)
+#define PIN_PB16			48
+#define PIN_PB16__GPIO			PINMUX_PIN(PIN_PB16, 0, 0)
+#define PIN_PB16__LCDDAT5		PINMUX_PIN(PIN_PB16, 1, 1)
+#define PIN_PB16__A5			PINMUX_PIN(PIN_PB16, 2, 1)
+#define PIN_PB16__TD1			PINMUX_PIN(PIN_PB16, 3, 2)
+#define PIN_PB16__I2SC1_WS		PINMUX_PIN(PIN_PB16, 4, 1)
+#define PIN_PB16__QSPI1_IO0		PINMUX_PIN(PIN_PB16, 5, 3)
+#define PIN_PB16__GRXDV			PINMUX_PIN(PIN_PB16, 6, 3)
+#define PIN_PB17			49
+#define PIN_PB17__GPIO			PINMUX_PIN(PIN_PB17, 0, 0)
+#define PIN_PB17__LCDDAT6		PINMUX_PIN(PIN_PB17, 1, 1)
+#define PIN_PB17__A6			PINMUX_PIN(PIN_PB17, 2, 1)
+#define PIN_PB17__RD1			PINMUX_PIN(PIN_PB17, 3, 2)
+#define PIN_PB17__I2SC1_DI0		PINMUX_PIN(PIN_PB17, 4, 1)
+#define PIN_PB17__QSPI1_IO1		PINMUX_PIN(PIN_PB17, 5, 3)
+#define PIN_PB17__GRXER			PINMUX_PIN(PIN_PB17, 6, 3)
+#define PIN_PB18			50
+#define PIN_PB18__GPIO			PINMUX_PIN(PIN_PB18, 0, 0)
+#define PIN_PB18__LCDDAT7		PINMUX_PIN(PIN_PB18, 1, 1)
+#define PIN_PB18__A7			PINMUX_PIN(PIN_PB18, 2, 1)
+#define PIN_PB18__RK1			PINMUX_PIN(PIN_PB18, 3, 2)
+#define PIN_PB18__I2SC1_DO0		PINMUX_PIN(PIN_PB18, 4, 1)
+#define PIN_PB18__QSPI1_IO2		PINMUX_PIN(PIN_PB18, 5, 3)
+#define PIN_PB18__GRX0			PINMUX_PIN(PIN_PB18, 6, 3)
+#define PIN_PB19			51
+#define PIN_PB19__GPIO			PINMUX_PIN(PIN_PB19, 0, 0)
+#define PIN_PB19__LCDDAT8		PINMUX_PIN(PIN_PB19, 1, 1)
+#define PIN_PB19__A8			PINMUX_PIN(PIN_PB19, 2, 1)
+#define PIN_PB19__RF1			PINMUX_PIN(PIN_PB19, 3, 2)
+#define PIN_PB19__TIOA3			PINMUX_PIN(PIN_PB19, 4, 2)
+#define PIN_PB19__QSPI1_IO3		PINMUX_PIN(PIN_PB19, 5, 3)
+#define PIN_PB19__GRX1			PINMUX_PIN(PIN_PB19, 6, 3)
+#define PIN_PB20			52
+#define PIN_PB20__GPIO			PINMUX_PIN(PIN_PB20, 0, 0)
+#define PIN_PB20__LCDDAT9		PINMUX_PIN(PIN_PB20, 1, 1)
+#define PIN_PB20__A9			PINMUX_PIN(PIN_PB20, 2, 1)
+#define PIN_PB20__TK0			PINMUX_PIN(PIN_PB20, 3, 1)
+#define PIN_PB20__TIOB3			PINMUX_PIN(PIN_PB20, 4, 2)
+#define PIN_PB20__PCK1			PINMUX_PIN(PIN_PB20, 5, 4)
+#define PIN_PB20__GTX0			PINMUX_PIN(PIN_PB20, 6, 3)
+#define PIN_PB21			53
+#define PIN_PB21__GPIO			PINMUX_PIN(PIN_PB21, 0, 0)
+#define PIN_PB21__LCDDAT10		PINMUX_PIN(PIN_PB21, 1, 1)
+#define PIN_PB21__A10			PINMUX_PIN(PIN_PB21, 2, 1)
+#define PIN_PB21__TF0			PINMUX_PIN(PIN_PB21, 3, 1)
+#define PIN_PB21__TCLK3			PINMUX_PIN(PIN_PB21, 4, 2)
+#define PIN_PB21__FLEXCOM3_IO2		PINMUX_PIN(PIN_PB21, 5, 3)
+#define PIN_PB21__GTX1			PINMUX_PIN(PIN_PB21, 6, 3)
+#define PIN_PB22			54
+#define PIN_PB22__GPIO			PINMUX_PIN(PIN_PB22, 0, 0)
+#define PIN_PB22__LCDDAT11		PINMUX_PIN(PIN_PB22, 1, 1)
+#define PIN_PB22__A11			PINMUX_PIN(PIN_PB22, 2, 1)
+#define PIN_PB22__TD0			PINMUX_PIN(PIN_PB22, 3, 1)
+#define PIN_PB22__TIOA2			PINMUX_PIN(PIN_PB22, 4, 2)
+#define PIN_PB22__FLEXCOM3_IO1		PINMUX_PIN(PIN_PB22, 5, 3)
+#define PIN_PB22__GMDC			PINMUX_PIN(PIN_PB22, 6, 3)
+#define PIN_PB23			55
+#define PIN_PB23__GPIO			PINMUX_PIN(PIN_PB23, 0, 0)
+#define PIN_PB23__LCDDAT12		PINMUX_PIN(PIN_PB23, 1, 1)
+#define PIN_PB23__A12			PINMUX_PIN(PIN_PB23, 2, 1)
+#define PIN_PB23__RD0			PINMUX_PIN(PIN_PB23, 3, 1)
+#define PIN_PB23__TIOB2			PINMUX_PIN(PIN_PB23, 4, 2)
+#define PIN_PB23__FLEXCOM3_IO0		PINMUX_PIN(PIN_PB23, 5, 3)
+#define PIN_PB23__GMDIO			PINMUX_PIN(PIN_PB23, 6, 3)
+#define PIN_PB24			56
+#define PIN_PB24__GPIO			PINMUX_PIN(PIN_PB24, 0, 0)
+#define PIN_PB24__LCDDAT13		PINMUX_PIN(PIN_PB24, 1, 1)
+#define PIN_PB24__A13			PINMUX_PIN(PIN_PB24, 2, 1)
+#define PIN_PB24__RK0			PINMUX_PIN(PIN_PB24, 3, 1)
+#define PIN_PB24__TCLK2			PINMUX_PIN(PIN_PB24, 4, 2)
+#define PIN_PB24__FLEXCOM3_IO3		PINMUX_PIN(PIN_PB24, 5, 3)
+#define PIN_PB24__ISC_D10		PINMUX_PIN(PIN_PB24, 6, 3)
+#define PIN_PB25			57
+#define PIN_PB25__GPIO			PINMUX_PIN(PIN_PB25, 0, 0)
+#define PIN_PB25__LCDDAT14		PINMUX_PIN(PIN_PB25, 1, 1)
+#define PIN_PB25__A14			PINMUX_PIN(PIN_PB25, 2, 1)
+#define PIN_PB25__RF0			PINMUX_PIN(PIN_PB25, 3, 1)
+#define PIN_PB25__FLEXCOM3_IO4		PINMUX_PIN(PIN_PB25, 5, 3)
+#define PIN_PB25__ISC_D11		PINMUX_PIN(PIN_PB25, 6, 3)
+#define PIN_PB26			58
+#define PIN_PB26__GPIO			PINMUX_PIN(PIN_PB26, 0, 0)
+#define PIN_PB26__LCDDAT15		PINMUX_PIN(PIN_PB26, 1, 1)
+#define PIN_PB26__A15			PINMUX_PIN(PIN_PB26, 2, 1)
+#define PIN_PB26__URXD0			PINMUX_PIN(PIN_PB26, 3, 1)
+#define PIN_PB26__PDMIC_DAT		PINMUX_PIN(PIN_PB26, 4, 1)
+#define PIN_PB26__ISC_D0		PINMUX_PIN(PIN_PB26, 6, 3)
+#define PIN_PB27			59
+#define PIN_PB27__GPIO			PINMUX_PIN(PIN_PB27, 0, 0)
+#define PIN_PB27__LCDDAT16		PINMUX_PIN(PIN_PB27, 1, 1)
+#define PIN_PB27__A16			PINMUX_PIN(PIN_PB27, 2, 1)
+#define PIN_PB27__UTXD0			PINMUX_PIN(PIN_PB27, 3, 1)
+#define PIN_PB27__PDMIC_CLK		PINMUX_PIN(PIN_PB27, 4, 1)
+#define PIN_PB27__ISC_D1		PINMUX_PIN(PIN_PB27, 6, 3)
+#define PIN_PB28			60
+#define PIN_PB28__GPIO			PINMUX_PIN(PIN_PB28, 0, 0)
+#define PIN_PB28__LCDDAT17		PINMUX_PIN(PIN_PB28, 1, 1)
+#define PIN_PB28__A17			PINMUX_PIN(PIN_PB28, 2, 1)
+#define PIN_PB28__FLEXCOM0_IO0		PINMUX_PIN(PIN_PB28, 3, 1)
+#define PIN_PB28__TIOA5			PINMUX_PIN(PIN_PB28, 4, 2)
+#define PIN_PB28__ISC_D2		PINMUX_PIN(PIN_PB28, 6, 3)
+#define PIN_PB29			61
+#define PIN_PB29__GPIO			PINMUX_PIN(PIN_PB29, 0, 0)
+#define PIN_PB29__LCDDAT18		PINMUX_PIN(PIN_PB29, 1, 1)
+#define PIN_PB29__A18			PINMUX_PIN(PIN_PB29, 2, 1)
+#define PIN_PB29__FLEXCOM0_IO1		PINMUX_PIN(PIN_PB29, 3, 1)
+#define PIN_PB29__TIOB5			PINMUX_PIN(PIN_PB29, 4, 2)
+#define PIN_PB29__ISC_D3		PINMUX_PIN(PIN_PB29, 7, 3)
+#define PIN_PB30			62
+#define PIN_PB30__GPIO			PINMUX_PIN(PIN_PB30, 0, 0)
+#define PIN_PB30__LCDDAT19		PINMUX_PIN(PIN_PB30, 1, 1)
+#define PIN_PB30__A19			PINMUX_PIN(PIN_PB30, 2, 1)
+#define PIN_PB30__FLEXCOM0_IO2		PINMUX_PIN(PIN_PB30, 3, 1)
+#define PIN_PB30__TCLK5			PINMUX_PIN(PIN_PB30, 4, 2)
+#define PIN_PB30__ISC_D4		PINMUX_PIN(PIN_PB30, 6, 3)
+#define PIN_PB31			63
+#define PIN_PB31__GPIO			PINMUX_PIN(PIN_PB31, 0, 0)
+#define PIN_PB31__LCDDAT20		PINMUX_PIN(PIN_PB31, 1, 1)
+#define PIN_PB31__A20			PINMUX_PIN(PIN_PB31, 2, 1)
+#define PIN_PB31__FLEXCOM0_IO3		PINMUX_PIN(PIN_PB31, 3, 1)
+#define PIN_PB31__TWD0			PINMUX_PIN(PIN_PB31, 4, 1)
+#define PIN_PB31__ISC_D5		PINMUX_PIN(PIN_PB31, 6, 3)
+#define PIN_PC0				64
+#define PIN_PC0__GPIO			PINMUX_PIN(PIN_PC0, 0, 0)
+#define PIN_PC0__LCDDAT21		PINMUX_PIN(PIN_PC0, 1, 1)
+#define PIN_PC0__A23			PINMUX_PIN(PIN_PC0, 2, 1)
+#define PIN_PC0__FLEXCOM0_IO4		PINMUX_PIN(PIN_PC0, 3, 1)
+#define PIN_PC0__TWCK0			PINMUX_PIN(PIN_PC0, 4, 1)
+#define PIN_PC0__ISC_D6			PINMUX_PIN(PIN_PC0, 6, 3)
+#define PIN_PC1				65
+#define PIN_PC1__GPIO			PINMUX_PIN(PIN_PC1, 0, 0)
+#define PIN_PC1__LCDDAT22		PINMUX_PIN(PIN_PC1, 1, 1)
+#define PIN_PC1__A24			PINMUX_PIN(PIN_PC1, 2, 1)
+#define PIN_PC1__CANTX0			PINMUX_PIN(PIN_PC1, 3, 1)
+#define PIN_PC1__SPI1_SPCK		PINMUX_PIN(PIN_PC1, 4, 1)
+#define PIN_PC1__I2SC0_CK		PINMUX_PIN(PIN_PC1, 5, 1)
+#define PIN_PC1__ISC_D7			PINMUX_PIN(PIN_PC1, 6, 3)
+#define PIN_PC2				66
+#define PIN_PC2__GPIO			PINMUX_PIN(PIN_PC2, 0, 0)
+#define PIN_PC2__LCDDAT23		PINMUX_PIN(PIN_PC2, 1, 1)
+#define PIN_PC2__A25			PINMUX_PIN(PIN_PC2, 2, 1)
+#define PIN_PC2__CANRX0			PINMUX_PIN(PIN_PC2, 3, 1)
+#define PIN_PC2__SPI1_MOSI		PINMUX_PIN(PIN_PC2, 4, 1)
+#define PIN_PC2__I2SC0_MCK		PINMUX_PIN(PIN_PC2, 5, 1)
+#define PIN_PC2__ISC_D8			PINMUX_PIN(PIN_PC2, 6, 3)
+#define PIN_PC3				67
+#define PIN_PC3__GPIO			PINMUX_PIN(PIN_PC3, 0, 0)
+#define PIN_PC3__LCDPWM			PINMUX_PIN(PIN_PC3, 1, 1)
+#define PIN_PC3__NWAIT			PINMUX_PIN(PIN_PC3, 2, 1)
+#define PIN_PC3__TIOA1			PINMUX_PIN(PIN_PC3, 3, 1)
+#define PIN_PC3__SPI1_MISO		PINMUX_PIN(PIN_PC3, 4, 1)
+#define PIN_PC3__I2SC0_WS		PINMUX_PIN(PIN_PC3, 5, 1)
+#define PIN_PC3__ISC_D9			PINMUX_PIN(PIN_PC3, 6, 3)
+#define PIN_PC4				68
+#define PIN_PC4__GPIO			PINMUX_PIN(PIN_PC4, 0, 0)
+#define PIN_PC4__LCDDISP		PINMUX_PIN(PIN_PC4, 1, 1)
+#define PIN_PC4__NWR1_NBS1		PINMUX_PIN(PIN_PC4, 2, 1)
+#define PIN_PC4__TIOB1			PINMUX_PIN(PIN_PC4, 3, 1)
+#define PIN_PC4__SPI1_NPCS0		PINMUX_PIN(PIN_PC4, 4, 1)
+#define PIN_PC4__I2SC0_DI0		PINMUX_PIN(PIN_PC4, 5, 1)
+#define PIN_PC4__ISC_PCK		PINMUX_PIN(PIN_PC4, 6, 3)
+#define PIN_PC5				69
+#define PIN_PC5__GPIO			PINMUX_PIN(PIN_PC5, 0, 0)
+#define PIN_PC5__LCDVSYNC		PINMUX_PIN(PIN_PC5, 1, 1)
+#define PIN_PC5__NCS0			PINMUX_PIN(PIN_PC5, 2, 1)
+#define PIN_PC5__TCLK1			PINMUX_PIN(PIN_PC5, 3, 1)
+#define PIN_PC5__SPI1_NPCS1		PINMUX_PIN(PIN_PC5, 4, 1)
+#define PIN_PC5__I2SC0_DO0		PINMUX_PIN(PIN_PC5, 5, 1)
+#define PIN_PC5__ISC_VSYNC		PINMUX_PIN(PIN_PC5, 6, 3)
+#define PIN_PC6				70
+#define PIN_PC6__GPIO			PINMUX_PIN(PIN_PC6, 0, 0)
+#define PIN_PC6__LCDHSYNC		PINMUX_PIN(PIN_PC6, 1, 1)
+#define PIN_PC6__NCS1			PINMUX_PIN(PIN_PC6, 2, 1)
+#define PIN_PC6__TWD1			PINMUX_PIN(PIN_PC6, 3, 1)
+#define PIN_PC6__SPI1_NPCS2		PINMUX_PIN(PIN_PC6, 4, 1)
+#define PIN_PC6__ISC_HSYNC		PINMUX_PIN(PIN_PC6, 6, 3)
+#define PIN_PC7				71
+#define PIN_PC7__GPIO			PINMUX_PIN(PIN_PC7, 0, 0)
+#define PIN_PC7__LCDPCK			PINMUX_PIN(PIN_PC7, 1, 1)
+#define PIN_PC7__NCS2			PINMUX_PIN(PIN_PC7, 2, 1)
+#define PIN_PC7__TWCK1			PINMUX_PIN(PIN_PC7, 3, 1)
+#define PIN_PC7__SPI1_NPCS3		PINMUX_PIN(PIN_PC7, 4, 1)
+#define PIN_PC7__URXD1			PINMUX_PIN(PIN_PC7, 5, 2)
+#define PIN_PC7__ISC_MCK		PINMUX_PIN(PIN_PC7, 6, 3)
+#define PIN_PC8				72
+#define PIN_PC8__GPIO			PINMUX_PIN(PIN_PC8, 0, 0)
+#define PIN_PC8__LCDDEN			PINMUX_PIN(PIN_PC8, 1, 1)
+#define PIN_PC8__NANDRDY		PINMUX_PIN(PIN_PC8, 2, 1)
+#define PIN_PC8__FIQ			PINMUX_PIN(PIN_PC8, 3, 1)
+#define PIN_PC8__PCK0			PINMUX_PIN(PIN_PC8, 4, 3)
+#define PIN_PC8__UTXD1			PINMUX_PIN(PIN_PC8, 5, 2)
+#define PIN_PC8__ISC_FIELD		PINMUX_PIN(PIN_PC8, 6, 3)
+#define PIN_PC9				73
+#define PIN_PC9__GPIO			PINMUX_PIN(PIN_PC9, 0, 0)
+#define PIN_PC9__FIQ			PINMUX_PIN(PIN_PC9, 1, 3)
+#define PIN_PC9__GTSUCOMP		PINMUX_PIN(PIN_PC9, 2, 1)
+#define PIN_PC9__ISC_D0			PINMUX_PIN(PIN_PC9, 3, 1)
+#define PIN_PC9__TIOA4			PINMUX_PIN(PIN_PC9, 4, 2)
+#define PIN_PC10			74
+#define PIN_PC10__GPIO			PINMUX_PIN(PIN_PC10, 0, 0)
+#define PIN_PC10__LCDDAT2		PINMUX_PIN(PIN_PC10, 1, 2)
+#define PIN_PC10__GTXCK			PINMUX_PIN(PIN_PC10, 2, 1)
+#define PIN_PC10__ISC_D1		PINMUX_PIN(PIN_PC10, 3, 1)
+#define PIN_PC10__TIOB4			PINMUX_PIN(PIN_PC10, 4, 2)
+#define PIN_PC10__CANTX0		PINMUX_PIN(PIN_PC10, 5, 2)
+#define PIN_PC11			75
+#define PIN_PC11__GPIO			PINMUX_PIN(PIN_PC11, 0, 0)
+#define PIN_PC11__LCDDAT3		PINMUX_PIN(PIN_PC11, 1, 2)
+#define PIN_PC11__GTXEN			PINMUX_PIN(PIN_PC11, 2, 1)
+#define PIN_PC11__ISC_D2		PINMUX_PIN(PIN_PC11, 3, 1)
+#define PIN_PC11__TCLK4			PINMUX_PIN(PIN_PC11, 4, 2)
+#define PIN_PC11__CANRX0		PINMUX_PIN(PIN_PC11, 5, 2)
+#define PIN_PC11__A0_NBS0		PINMUX_PIN(PIN_PC11, 6, 2)
+#define PIN_PC12			76
+#define PIN_PC12__GPIO			PINMUX_PIN(PIN_PC12, 0, 0)
+#define PIN_PC12__LCDDAT4		PINMUX_PIN(PIN_PC12, 1, 2)
+#define PIN_PC12__GRXDV			PINMUX_PIN(PIN_PC12, 2, 1)
+#define PIN_PC12__ISC_D3		PINMUX_PIN(PIN_PC12, 3, 1)
+#define PIN_PC12__URXD3			PINMUX_PIN(PIN_PC12, 4, 1)
+#define PIN_PC12__TK0			PINMUX_PIN(PIN_PC12, 5, 2)
+#define PIN_PC12__A1			PINMUX_PIN(PIN_PC12, 6, 2)
+#define PIN_PC13			77
+#define PIN_PC13__GPIO			PINMUX_PIN(PIN_PC13, 0, 0)
+#define PIN_PC13__LCDDAT5		PINMUX_PIN(PIN_PC13, 1, 2)
+#define PIN_PC13__GRXER			PINMUX_PIN(PIN_PC13, 2, 1)
+#define PIN_PC13__ISC_D4		PINMUX_PIN(PIN_PC13, 3, 1)
+#define PIN_PC13__UTXD3			PINMUX_PIN(PIN_PC13, 4, 1)
+#define PIN_PC13__TF0			PINMUX_PIN(PIN_PC13, 5, 2)
+#define PIN_PC13__A2			PINMUX_PIN(PIN_PC13, 6, 2)
+#define PIN_PC14			78
+#define PIN_PC14__GPIO			PINMUX_PIN(PIN_PC14, 0, 0)
+#define PIN_PC14__LCDDAT6		PINMUX_PIN(PIN_PC14, 1, 2)
+#define PIN_PC14__GRX0			PINMUX_PIN(PIN_PC14, 2, 1)
+#define PIN_PC14__ISC_D5		PINMUX_PIN(PIN_PC14, 3, 1)
+#define PIN_PC14__TD0			PINMUX_PIN(PIN_PC14, 5, 2)
+#define PIN_PC14__A3			PINMUX_PIN(PIN_PC14, 6, 2)
+#define PIN_PC15			79
+#define PIN_PC15__GPIO			PINMUX_PIN(PIN_PC15, 0, 0)
+#define PIN_PC15__LCDDAT7		PINMUX_PIN(PIN_PC15, 1, 2)
+#define PIN_PC15__GRX1			PINMUX_PIN(PIN_PC15, 2, 1)
+#define PIN_PC15__ISC_D6		PINMUX_PIN(PIN_PC15, 3, 1)
+#define PIN_PC15__RD0			PINMUX_PIN(PIN_PC15, 5, 2)
+#define PIN_PC15__A4			PINMUX_PIN(PIN_PC15, 6, 2)
+#define PIN_PC16			80
+#define PIN_PC16__GPIO			PINMUX_PIN(PIN_PC16, 0, 0)
+#define PIN_PC16__LCDDAT10		PINMUX_PIN(PIN_PC16, 1, 2)
+#define PIN_PC16__GTX0			PINMUX_PIN(PIN_PC16, 2, 1)
+#define PIN_PC16__ISC_D7		PINMUX_PIN(PIN_PC16, 3, 1)
+#define PIN_PC16__RK0			PINMUX_PIN(PIN_PC16, 5, 2)
+#define PIN_PC16__A5			PINMUX_PIN(PIN_PC16, 6, 2)
+#define PIN_PC17			81
+#define PIN_PC17__GPIO			PINMUX_PIN(PIN_PC17, 0, 0)
+#define PIN_PC17__LCDDAT11		PINMUX_PIN(PIN_PC17, 1, 2)
+#define PIN_PC17__GTX1			PINMUX_PIN(PIN_PC17, 2, 1)
+#define PIN_PC17__ISC_D8		PINMUX_PIN(PIN_PC17, 3, 1)
+#define PIN_PC17__RF0			PINMUX_PIN(PIN_PC17, 5, 2)
+#define PIN_PC17__A6			PINMUX_PIN(PIN_PC17, 6, 2)
+#define PIN_PC18			82
+#define PIN_PC18__GPIO			PINMUX_PIN(PIN_PC18, 0, 0)
+#define PIN_PC18__LCDDAT12		PINMUX_PIN(PIN_PC18, 1, 2)
+#define PIN_PC18__GMDC			PINMUX_PIN(PIN_PC18, 2, 1)
+#define PIN_PC18__ISC_D9		PINMUX_PIN(PIN_PC18, 3, 1)
+#define PIN_PC18__FLEXCOM3_IO2		PINMUX_PIN(PIN_PC18, 5, 2)
+#define PIN_PC18__A7			PINMUX_PIN(PIN_PC18, 6, 2)
+#define PIN_PC19			83
+#define PIN_PC19__GPIO			PINMUX_PIN(PIN_PC19, 0, 0)
+#define PIN_PC19__LCDDAT13		PINMUX_PIN(PIN_PC19, 1, 2)
+#define PIN_PC19__GMDIO			PINMUX_PIN(PIN_PC19, 2, 1)
+#define PIN_PC19__ISC_D10		PINMUX_PIN(PIN_PC19, 3, 1)
+#define PIN_PC19__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC19, 5, 2)
+#define PIN_PC19__A8			PINMUX_PIN(PIN_PC19, 6, 2)
+#define PIN_PC20			84
+#define PIN_PC20__GPIO			PINMUX_PIN(PIN_PC20, 0, 0)
+#define PIN_PC20__LCDDAT14		PINMUX_PIN(PIN_PC20, 1, 2)
+#define PIN_PC20__GRXCK			PINMUX_PIN(PIN_PC20, 2, 1)
+#define PIN_PC20__ISC_D11		PINMUX_PIN(PIN_PC20, 3, 1)
+#define PIN_PC20__FLEXCOM3_IO0		PINMUX_PIN(PIN_PC20, 5, 2)
+#define PIN_PC20__A9			PINMUX_PIN(PIN_PC20, 6, 2)
+#define PIN_PC21			85
+#define PIN_PC21__GPIO			PINMUX_PIN(PIN_PC21, 0, 0)
+#define PIN_PC21__LCDDAT15		PINMUX_PIN(PIN_PC21, 1, 2)
+#define PIN_PC21__GTXER			PINMUX_PIN(PIN_PC21, 2, 1)
+#define PIN_PC21__ISC_PCK		PINMUX_PIN(PIN_PC21, 3, 1)
+#define PIN_PC21__FLEXCOM3_IO3		PINMUX_PIN(PIN_PC21, 5, 2)
+#define PIN_PC21__A10			PINMUX_PIN(PIN_PC21, 6, 2)
+#define PIN_PC22			86
+#define PIN_PC22__GPIO			PINMUX_PIN(PIN_PC22, 0, 0)
+#define PIN_PC22__LCDDAT18		PINMUX_PIN(PIN_PC22, 1, 2)
+#define PIN_PC22__GCRS			PINMUX_PIN(PIN_PC22, 2, 1)
+#define PIN_PC22__ISC_VSYNC		PINMUX_PIN(PIN_PC22, 3, 1)
+#define PIN_PC22__FLEXCOM3_IO4		PINMUX_PIN(PIN_PC22, 5, 2)
+#define PIN_PC22__A11			PINMUX_PIN(PIN_PC22, 6, 2)
+#define PIN_PC23			87
+#define PIN_PC23__GPIO			PINMUX_PIN(PIN_PC23, 0, 0)
+#define PIN_PC23__LCDDAT19		PINMUX_PIN(PIN_PC23, 1, 2)
+#define PIN_PC23__GCOL			PINMUX_PIN(PIN_PC23, 2, 1)
+#define PIN_PC23__ISC_HSYNC		PINMUX_PIN(PIN_PC23, 3, 1)
+#define PIN_PC23__A12			PINMUX_PIN(PIN_PC23, 6, 2)
+#define PIN_PC24			88
+#define PIN_PC24__GPIO			PINMUX_PIN(PIN_PC24, 0, 0)
+#define PIN_PC24__LCDDAT20		PINMUX_PIN(PIN_PC24, 1, 2)
+#define PIN_PC24__GRX2			PINMUX_PIN(PIN_PC24, 2, 1)
+#define PIN_PC24__ISC_MCK		PINMUX_PIN(PIN_PC24, 3, 1)
+#define PIN_PC24__A13			PINMUX_PIN(PIN_PC24, 6, 2)
+#define PIN_PC25			89
+#define PIN_PC25__GPIO			PINMUX_PIN(PIN_PC25, 0, 0)
+#define PIN_PC25__LCDDAT21		PINMUX_PIN(PIN_PC25, 1, 2)
+#define PIN_PC25__GRX3			PINMUX_PIN(PIN_PC25, 2, 1)
+#define PIN_PC25__ISC_FIELD		PINMUX_PIN(PIN_PC25, 3, 1)
+#define PIN_PC25__A14			PINMUX_PIN(PIN_PC25, 6, 2)
+#define PIN_PC26			90
+#define PIN_PC26__GPIO			PINMUX_PIN(PIN_PC26, 0, 0)
+#define PIN_PC26__LCDDAT22		PINMUX_PIN(PIN_PC26, 1, 2)
+#define PIN_PC26__GTX2			PINMUX_PIN(PIN_PC26, 2, 1)
+#define PIN_PC26__CANTX1		PINMUX_PIN(PIN_PC26, 4, 1)
+#define PIN_PC26__A15			PINMUX_PIN(PIN_PC26, 6, 2)
+#define PIN_PC27			91
+#define PIN_PC27__GPIO			PINMUX_PIN(PIN_PC27, 0, 0)
+#define PIN_PC27__LCDDAT23		PINMUX_PIN(PIN_PC27, 1, 2)
+#define PIN_PC27__GTX3			PINMUX_PIN(PIN_PC27, 2, 1)
+#define PIN_PC27__PCK1			PINMUX_PIN(PIN_PC27, 3, 2)
+#define PIN_PC27__CANRX1		PINMUX_PIN(PIN_PC27, 4, 1)
+#define PIN_PC27__TWD0			PINMUX_PIN(PIN_PC27, 5, 2)
+#define PIN_PC27__A16			PINMUX_PIN(PIN_PC27, 6, 2)
+#define PIN_PC28			92
+#define PIN_PC28__GPIO			PINMUX_PIN(PIN_PC28, 0, 0)
+#define PIN_PC28__LCDPWM		PINMUX_PIN(PIN_PC28, 1, 2)
+#define PIN_PC28__FLEXCOM4_IO0		PINMUX_PIN(PIN_PC28, 2, 1)
+#define PIN_PC28__PCK2			PINMUX_PIN(PIN_PC28, 3, 2)
+#define PIN_PC28__TWCK0			PINMUX_PIN(PIN_PC28, 5, 2)
+#define PIN_PC28__A17			PINMUX_PIN(PIN_PC28, 6, 2)
+#define PIN_PC29			93
+#define PIN_PC29__GPIO			PINMUX_PIN(PIN_PC29, 0, 0)
+#define PIN_PC29__LCDDISP		PINMUX_PIN(PIN_PC29, 1, 2)
+#define PIN_PC29__FLEXCOM4_IO1		PINMUX_PIN(PIN_PC29, 2, 1)
+#define PIN_PC29__A18			PINMUX_PIN(PIN_PC29, 6, 2)
+#define PIN_PC30			94
+#define PIN_PC30__GPIO			PINMUX_PIN(PIN_PC30, 0, 0)
+#define PIN_PC30__LCDVSYNC		PINMUX_PIN(PIN_PC30, 1, 2)
+#define PIN_PC30__FLEXCOM4_IO2		PINMUX_PIN(PIN_PC30, 2, 1)
+#define PIN_PC30__A19			PINMUX_PIN(PIN_PC30, 6, 2)
+#define PIN_PC31			95
+#define PIN_PC31__GPIO			PINMUX_PIN(PIN_PC31, 0, 0)
+#define PIN_PC31__LCDHSYNC		PINMUX_PIN(PIN_PC31, 1, 2)
+#define PIN_PC31__FLEXCOM4_IO3		PINMUX_PIN(PIN_PC31, 2, 1)
+#define PIN_PC31__URXD3			PINMUX_PIN(PIN_PC31, 3, 2)
+#define PIN_PC31__A20			PINMUX_PIN(PIN_PC31, 6, 2)
+#define PIN_PD0				96
+#define PIN_PD0__GPIO			PINMUX_PIN(PIN_PD0, 0, 0)
+#define PIN_PD0__LCDPCK			PINMUX_PIN(PIN_PD0, 1, 2)
+#define PIN_PD0__FLEXCOM4_IO4		PINMUX_PIN(PIN_PD0, 2, 1)
+#define PIN_PD0__UTXD3			PINMUX_PIN(PIN_PD0, 3, 2)
+#define PIN_PD0__GTSUCOMP		PINMUX_PIN(PIN_PD0, 4, 2)
+#define PIN_PD0__A23			PINMUX_PIN(PIN_PD0, 6, 2)
+#define PIN_PD1				97
+#define PIN_PD1__GPIO			PINMUX_PIN(PIN_PD1, 0, 0)
+#define PIN_PD1__LCDDEN			PINMUX_PIN(PIN_PD1, 1, 2)
+#define PIN_PD1__GRXCK			PINMUX_PIN(PIN_PD1, 4, 2)
+#define PIN_PD1__A24			PINMUX_PIN(PIN_PD1, 6, 2)
+#define PIN_PD2				98
+#define PIN_PD2__GPIO			PINMUX_PIN(PIN_PD2, 0, 0)
+#define PIN_PD2__URXD1			PINMUX_PIN(PIN_PD2, 1, 1)
+#define PIN_PD2__GTXER			PINMUX_PIN(PIN_PD2, 4, 2)
+#define PIN_PD2__ISC_MCK		PINMUX_PIN(PIN_PD2, 5, 2)
+#define PIN_PD2__A25			PINMUX_PIN(PIN_PD2, 6, 2)
+#define PIN_PD3				99
+#define PIN_PD3__GPIO			PINMUX_PIN(PIN_PD3, 0, 0)
+#define PIN_PD3__UTXD1			PINMUX_PIN(PIN_PD3, 1, 1)
+#define PIN_PD3__FIQ			PINMUX_PIN(PIN_PD3, 2, 2)
+#define PIN_PD3__GCRS			PINMUX_PIN(PIN_PD3, 4, 2)
+#define PIN_PD3__ISC_D11		PINMUX_PIN(PIN_PD3, 5, 2)
+#define PIN_PD3__NWAIT			PINMUX_PIN(PIN_PD3, 6, 2)
+#define PIN_PD4				100
+#define PIN_PD4__GPIO			PINMUX_PIN(PIN_PD4, 0, 0)
+#define PIN_PD4__TWD1			PINMUX_PIN(PIN_PD4, 1, 2)
+#define PIN_PD4__URXD2			PINMUX_PIN(PIN_PD4, 2, 1)
+#define PIN_PD4__GCOL			PINMUX_PIN(PIN_PD4, 4, 2)
+#define PIN_PD4__ISC_D10		PINMUX_PIN(PIN_PD4, 5, 2)
+#define PIN_PD4__NCS0			PINMUX_PIN(PIN_PD4, 6, 2)
+#define PIN_PD5				101
+#define PIN_PD5__GPIO			PINMUX_PIN(PIN_PD5, 0, 0)
+#define PIN_PD5__TWCK1			PINMUX_PIN(PIN_PD5, 1, 2)
+#define PIN_PD5__UTXD2			PINMUX_PIN(PIN_PD5, 2, 1)
+#define PIN_PD5__GRX2			PINMUX_PIN(PIN_PD5, 4, 2)
+#define PIN_PD5__ISC_D9			PINMUX_PIN(PIN_PD5, 5, 2)
+#define PIN_PD5__NCS1			PINMUX_PIN(PIN_PD5, 6, 2)
+#define PIN_PD6				102
+#define PIN_PD6__GPIO			PINMUX_PIN(PIN_PD6, 0, 0)
+#define PIN_PD6__TCK			PINMUX_PIN(PIN_PD6, 1, 2)
+#define PIN_PD6__PCK1			PINMUX_PIN(PIN_PD6, 2, 1)
+#define PIN_PD6__GRX3			PINMUX_PIN(PIN_PD6, 4, 2)
+#define PIN_PD6__ISC_D8			PINMUX_PIN(PIN_PD6, 5, 2)
+#define PIN_PD6__NCS2			PINMUX_PIN(PIN_PD6, 6, 2)
+#define PIN_PD7				103
+#define PIN_PD7__GPIO			PINMUX_PIN(PIN_PD7, 0, 0)
+#define PIN_PD7__TDI			PINMUX_PIN(PIN_PD7, 1, 2)
+#define PIN_PD7__UTMI_RXVAL		PINMUX_PIN(PIN_PD7, 3, 1)
+#define PIN_PD7__GTX2			PINMUX_PIN(PIN_PD7, 4, 2)
+#define PIN_PD7__ISC_D0			PINMUX_PIN(PIN_PD7, 5, 2)
+#define PIN_PD7__NWR1_NBS1		PINMUX_PIN(PIN_PD7, 6, 2)
+#define PIN_PD8				104
+#define PIN_PD8__GPIO			PINMUX_PIN(PIN_PD8, 0, 0)
+#define PIN_PD8__TDO			PINMUX_PIN(PIN_PD8, 1, 2)
+#define PIN_PD8__UTMI_RXERR		PINMUX_PIN(PIN_PD8, 3, 1)
+#define PIN_PD8__GTX3			PINMUX_PIN(PIN_PD8, 4, 2)
+#define PIN_PD8__ISC_D1			PINMUX_PIN(PIN_PD8, 5, 2)
+#define PIN_PD8__NANDRDY		PINMUX_PIN(PIN_PD8, 6, 2)
+#define PIN_PD9				105
+#define PIN_PD9__GPIO			PINMUX_PIN(PIN_PD9, 0, 0)
+#define PIN_PD9__TMS			PINMUX_PIN(PIN_PD9, 1, 2)
+#define PIN_PD9__UTMI_RXACT		PINMUX_PIN(PIN_PD9, 3, 1)
+#define PIN_PD9__GTXCK			PINMUX_PIN(PIN_PD9, 4, 2)
+#define PIN_PD9__ISC_D2			PINMUX_PIN(PIN_PD9, 5, 2)
+#define PIN_PD10			106
+#define PIN_PD10__GPIO			PINMUX_PIN(PIN_PD10, 0, 0)
+#define PIN_PD10__NTRST			PINMUX_PIN(PIN_PD10, 1, 2)
+#define PIN_PD10__UTMI_HDIS		PINMUX_PIN(PIN_PD10, 3, 1)
+#define PIN_PD10__GTXEN			PINMUX_PIN(PIN_PD10, 4, 2)
+#define PIN_PD10__ISC_D3		PINMUX_PIN(PIN_PD10, 5, 2)
+#define PIN_PD11			107
+#define PIN_PD11__GPIO			PINMUX_PIN(PIN_PD11, 0, 0)
+#define PIN_PD11__TIOA1			PINMUX_PIN(PIN_PD11, 1, 3)
+#define PIN_PD11__PCK2			PINMUX_PIN(PIN_PD11, 2, 2)
+#define PIN_PD11__UTMI_LS0		PINMUX_PIN(PIN_PD11, 3, 1)
+#define PIN_PD11__GRXDV			PINMUX_PIN(PIN_PD11, 4, 2)
+#define PIN_PD11__ISC_D4		PINMUX_PIN(PIN_PD11, 5, 2)
+#define PIN_PD11__ISC_MCK		PINMUX_PIN(PIN_PD11, 7, 4)
+#define PIN_PD12			108
+#define PIN_PD12__GPIO			PINMUX_PIN(PIN_PD12, 0, 0)
+#define PIN_PD12__TIOB1			PINMUX_PIN(PIN_PD12, 1, 3)
+#define PIN_PD12__FLEXCOM4_IO0		PINMUX_PIN(PIN_PD12, 2, 2)
+#define PIN_PD12__UTMI_LS1		PINMUX_PIN(PIN_PD12, 3, 1)
+#define PIN_PD12__GRXER			PINMUX_PIN(PIN_PD12, 4, 2)
+#define PIN_PD12__ISC_D5		PINMUX_PIN(PIN_PD12, 5, 2)
+#define PIN_PD12__ISC_D4		PINMUX_PIN(PIN_PD12, 6, 4)
+#define PIN_PD13			109
+#define PIN_PD13__GPIO			PINMUX_PIN(PIN_PD13, 0, 0)
+#define PIN_PD13__TCLK1			PINMUX_PIN(PIN_PD13, 1, 3)
+#define PIN_PD13__FLEXCOM4_IO1		PINMUX_PIN(PIN_PD13, 2, 2)
+#define PIN_PD13__UTMI_CDRPCSEL0	PINMUX_PIN(PIN_PD13, 3, 1)
+#define PIN_PD13__GRX0			PINMUX_PIN(PIN_PD13, 4, 2)
+#define PIN_PD13__ISC_D6		PINMUX_PIN(PIN_PD13, 5, 2)
+#define PIN_PD13__ISC_D5		PINMUX_PIN(PIN_PD13, 6, 4)
+#define PIN_PD14			110
+#define PIN_PD14__GPIO			PINMUX_PIN(PIN_PD14, 0, 0)
+#define PIN_PD14__TCK			PINMUX_PIN(PIN_PD14, 1, 1)
+#define PIN_PD14__FLEXCOM4_IO2		PINMUX_PIN(PIN_PD14, 2, 2)
+#define PIN_PD14__UTMI_CDRPCSEL1	PINMUX_PIN(PIN_PD14, 3, 1)
+#define PIN_PD14__GRX1			PINMUX_PIN(PIN_PD14, 4, 2)
+#define PIN_PD14__ISC_D7		PINMUX_PIN(PIN_PD14, 5, 2)
+#define PIN_PD14__ISC_D6		PINMUX_PIN(PIN_PD14, 6, 4)
+#define PIN_PD15			111
+#define PIN_PD15__GPIO			PINMUX_PIN(PIN_PD15, 0, 0)
+#define PIN_PD15__TDI			PINMUX_PIN(PIN_PD15, 1, 1)
+#define PIN_PD15__FLEXCOM4_IO3		PINMUX_PIN(PIN_PD15, 2, 2)
+#define PIN_PD15__UTMI_CDRCPDIVEN	PINMUX_PIN(PIN_PD15, 3, 1)
+#define PIN_PD15__GTX0			PINMUX_PIN(PIN_PD15, 4, 2)
+#define PIN_PD15__ISC_PCK		PINMUX_PIN(PIN_PD15, 5, 2)
+#define PIN_PD15__ISC_D7		PINMUX_PIN(PIN_PD15, 6, 4)
+#define PIN_PD16			112
+#define PIN_PD16__GPIO			PINMUX_PIN(PIN_PD16, 0, 0)
+#define PIN_PD16__TDO			PINMUX_PIN(PIN_PD16, 1, 1)
+#define PIN_PD16__FLEXCOM4_IO4		PINMUX_PIN(PIN_PD16, 2, 2)
+#define PIN_PD16__UTMI_CDRBISTEN	PINMUX_PIN(PIN_PD16, 3, 1)
+#define PIN_PD16__GTX1			PINMUX_PIN(PIN_PD16, 4, 2)
+#define PIN_PD16__ISC_VSYNC		PINMUX_PIN(PIN_PD16, 5, 2)
+#define PIN_PD16__ISC_D8		PINMUX_PIN(PIN_PD16, 6, 4)
+#define PIN_PD17			113
+#define PIN_PD17__GPIO			PINMUX_PIN(PIN_PD17, 0, 0)
+#define PIN_PD17__TMS			PINMUX_PIN(PIN_PD17, 1, 1)
+#define PIN_PD17__UTMI_CDRCPSELDIV	PINMUX_PIN(PIN_PD17, 3, 1)
+#define PIN_PD17__GMDC			PINMUX_PIN(PIN_PD17, 4, 2)
+#define PIN_PD17__ISC_HSYNC		PINMUX_PIN(PIN_PD17, 5, 2)
+#define PIN_PD17__ISC_D9		PINMUX_PIN(PIN_PD17, 6, 4)
+#define PIN_PD18			114
+#define PIN_PD18__GPIO			PINMUX_PIN(PIN_PD18, 0, 0)
+#define PIN_PD18__NTRST			PINMUX_PIN(PIN_PD18, 1, 1)
+#define PIN_PD18__GMDIO			PINMUX_PIN(PIN_PD18, 4, 2)
+#define PIN_PD18__ISC_FIELD		PINMUX_PIN(PIN_PD18, 5, 2)
+#define PIN_PD18__ISC_D10		PINMUX_PIN(PIN_PD18, 6, 4)
+#define PIN_PD19			115
+#define PIN_PD19__GPIO			PINMUX_PIN(PIN_PD19, 0, 0)
+#define PIN_PD19__PCK0			PINMUX_PIN(PIN_PD19, 1, 1)
+#define PIN_PD19__TWD1			PINMUX_PIN(PIN_PD19, 2, 3)
+#define PIN_PD19__URXD2			PINMUX_PIN(PIN_PD19, 3, 3)
+#define PIN_PD19__I2SC0_CK		PINMUX_PIN(PIN_PD19, 5, 2)
+#define PIN_PD19__ISC_D11		PINMUX_PIN(PIN_PD19, 6, 4)
+#define PIN_PD20			116
+#define PIN_PD20__GPIO			PINMUX_PIN(PIN_PD20, 0, 0)
+#define PIN_PD20__TIOA2			PINMUX_PIN(PIN_PD20, 1, 3)
+#define PIN_PD20__TWCK1			PINMUX_PIN(PIN_PD20, 2, 3)
+#define PIN_PD20__UTXD2			PINMUX_PIN(PIN_PD20, 3, 3)
+#define PIN_PD20__I2SC0_MCK		PINMUX_PIN(PIN_PD20, 5, 2)
+#define PIN_PD20__ISC_PCK		PINMUX_PIN(PIN_PD20, 6, 4)
+#define PIN_PD21			117
+#define PIN_PD21__GPIO			PINMUX_PIN(PIN_PD21, 0, 0)
+#define PIN_PD21__TIOB2			PINMUX_PIN(PIN_PD21, 1, 3)
+#define PIN_PD21__TWD0			PINMUX_PIN(PIN_PD21, 2, 4)
+#define PIN_PD21__FLEXCOM4_IO0		PINMUX_PIN(PIN_PD21, 3, 3)
+#define PIN_PD21__I2SC0_WS		PINMUX_PIN(PIN_PD21, 5, 2)
+#define PIN_PD21__ISC_VSYNC		PINMUX_PIN(PIN_PD21, 6, 4)
+#define PIN_PD22			118
+#define PIN_PD22__GPIO			PINMUX_PIN(PIN_PD22, 0, 0)
+#define PIN_PD22__TCLK2			PINMUX_PIN(PIN_PD22, 1, 3)
+#define PIN_PD22__TWCK0			PINMUX_PIN(PIN_PD22, 2, 4)
+#define PIN_PD22__FLEXCOM4_IO1		PINMUX_PIN(PIN_PD22, 3, 3)
+#define PIN_PD22__I2SC0_DI0		PINMUX_PIN(PIN_PD22, 5, 2)
+#define PIN_PD22__ISC_HSYNC		PINMUX_PIN(PIN_PD22, 6, 4)
+#define PIN_PD23			119
+#define PIN_PD23__GPIO			PINMUX_PIN(PIN_PD23, 0, 0)
+#define PIN_PD23__URXD2			PINMUX_PIN(PIN_PD23, 1, 2)
+#define PIN_PD23__FLEXCOM4_IO2		PINMUX_PIN(PIN_PD23, 3, 3)
+#define PIN_PD23__I2SC0_DO0		PINMUX_PIN(PIN_PD23, 5, 2)
+#define PIN_PD23__ISC_FIELD		PINMUX_PIN(PIN_PD23, 6, 4)
+#define PIN_PD24			120
+#define PIN_PD24__GPIO			PINMUX_PIN(PIN_PD24, 0, 0)
+#define PIN_PD24__UTXD2			PINMUX_PIN(PIN_PD24, 1, 2)
+#define PIN_PD24__FLEXCOM4_IO3		PINMUX_PIN(PIN_PD24, 3, 3)
+#define PIN_PD25			121
+#define PIN_PD25__GPIO			PINMUX_PIN(PIN_PD25, 0, 0)
+#define PIN_PD25__SPI1_SPCK		PINMUX_PIN(PIN_PD25, 1, 3)
+#define PIN_PD25__FLEXCOM4_IO4		PINMUX_PIN(PIN_PD25, 3, 3)
+#define PIN_PD26			122
+#define PIN_PD26__GPIO			PINMUX_PIN(PIN_PD26, 0, 0)
+#define PIN_PD26__SPI1_MOSI		PINMUX_PIN(PIN_PD26, 1, 3)
+#define PIN_PD26__FLEXCOM2_IO0		PINMUX_PIN(PIN_PD26, 3, 2)
+#define PIN_PD27			123
+#define PIN_PD27__GPIO			PINMUX_PIN(PIN_PD27, 0, 0)
+#define PIN_PD27__SPI1_MISO		PINMUX_PIN(PIN_PD27, 1, 3)
+#define PIN_PD27__TCK			PINMUX_PIN(PIN_PD27, 2, 3)
+#define PIN_PD27__FLEXCOM2_IO1		PINMUX_PIN(PIN_PD27, 3, 2)
+#define PIN_PD28			124
+#define PIN_PD28__GPIO			PINMUX_PIN(PIN_PD28, 0, 0)
+#define PIN_PD28__SPI1_NPCS0		PINMUX_PIN(PIN_PD28, 1, 3)
+#define PIN_PD28__TCI			PINMUX_PIN(PIN_PD28, 2, 3)
+#define PIN_PD28__FLEXCOM2_IO2		PINMUX_PIN(PIN_PD28, 3, 2)
+#define PIN_PD29			125
+#define PIN_PD29__GPIO			PINMUX_PIN(PIN_PD29, 0, 0)
+#define PIN_PD29__SPI1_NPCS1		PINMUX_PIN(PIN_PD29, 1, 3)
+#define PIN_PD29__TDO			PINMUX_PIN(PIN_PD29, 2, 3)
+#define PIN_PD29__FLEXCOM2_IO3		PINMUX_PIN(PIN_PD29, 3, 2)
+#define PIN_PD29__TIOA3			PINMUX_PIN(PIN_PD29, 4, 3)
+#define PIN_PD29__TWD0			PINMUX_PIN(PIN_PD29, 5, 3)
+#define PIN_PD30			126
+#define PIN_PD30__GPIO			PINMUX_PIN(PIN_PD30, 0, 0)
+#define PIN_PD30__SPI1_NPCS2		PINMUX_PIN(PIN_PD30, 1, 3)
+#define PIN_PD30__TMS			PINMUX_PIN(PIN_PD30, 2, 3)
+#define PIN_PD30__FLEXCOM2_IO4		PINMUX_PIN(PIN_PD30, 3, 2)
+#define PIN_PD30__TIOB3			PINMUX_PIN(PIN_PD30, 4, 3)
+#define PIN_PD30__TWCK0			PINMUX_PIN(PIN_PD30, 5, 3)
+#define PIN_PD31			127
+#define PIN_PD31__GPIO			PINMUX_PIN(PIN_PD31, 0, 0)
+#define PIN_PD31__ADTRG			PINMUX_PIN(PIN_PD31, 1, 1)
+#define PIN_PD31__NTRST			PINMUX_PIN(PIN_PD31, 2, 3)
+#define PIN_PD31__IRQ			PINMUX_PIN(PIN_PD31, 3, 4)
+#define PIN_PD31__TCLK3			PINMUX_PIN(PIN_PD31, 4, 3)
+#define PIN_PD31__PCK0			PINMUX_PIN(PIN_PD31, 5, 2)
diff --git a/src/arm/microchip/sama5d2.dtsi b/src/arm/microchip/sama5d2.dtsi
new file mode 100644
index 0000000..5f8e297
--- /dev/null
+++ b/src/arm/microchip/sama5d2.dtsi
@@ -0,0 +1,1166 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d2.dtsi - Device Tree Include file for SAMA5D2 family SoC
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel SAMA5D2 family SoC";
+	compatible = "atmel,sama5d2";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	etb@740000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0x740000 0x1000>;
+
+		clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+		clock-names = "apb_pclk";
+
+		in-ports {
+			port {
+				etb_in: endpoint {
+					remote-endpoint = <&etm_out>;
+				};
+			};
+		};
+	};
+
+	etm@73c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0x73c000 0x1000>;
+
+		clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+		clock-names = "apb_pclk";
+
+		out-ports {
+			port {
+				etm_out: endpoint {
+					remote-endpoint = <&etb_in>;
+				};
+			};
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	ns_sram: sram@200000 {
+		compatible = "mmio-sram";
+		reg = <0x00200000 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00200000 0x20000>;
+	};
+
+	resistive_touch: resistive-touch {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
+			      <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
+			      <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
+		io-channel-names = "x", "y", "pressure";
+		touchscreen-min-pressure = <50000>;
+		status = "disabled";
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		nfc_sram: sram@100000 {
+			compatible = "mmio-sram";
+			no-memory-wc;
+			reg = <0x00100000 0x2400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x00100000 0x2400>;
+
+		};
+
+		usb0: gadget@300000 {
+			compatible = "atmel,sama5d3-udc";
+			reg = <0x00300000 0x100000
+			       0xfc02c000 0x400>;
+			interrupts = <42 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		usb1: ohci@400000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00400000 0x100000>;
+			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: ehci@500000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 41>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		L2: cache-controller@a00000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a00000 0x1000>;
+			interrupts = <63 IRQ_TYPE_LEVEL_HIGH 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,sama5d3-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&hsmc>;
+			reg = <0x10000000 0x10000000
+			       0x60000000 0x30000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x60000000 0x10000000
+				  0x2 0x0 0x70000000 0x10000000
+				  0x3 0x0 0x80000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,sama5d3-nand-controller";
+				atmel,nfc-sram = <&nfc_sram>;
+				atmel,nfc-io = <&nfc_io>;
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			compatible = "atmel,sama5d2-sdhci";
+			reg = <0xa0000000 0x300>;
+			interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 31>, <&pmc PMC_TYPE_GCK 31>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
+			clock-names = "hclock", "multclk", "baseclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 31>;
+			assigned-clock-rates = <480000000>;
+			status = "disabled";
+		};
+
+		sdmmc1: sdio-host@b0000000 {
+			compatible = "atmel,sama5d2-sdhci";
+			reg = <0xb0000000 0x300>;
+			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_GCK 32>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
+			clock-names = "hclock", "multclk", "baseclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 32>;
+			assigned-clock-rates = <480000000>;
+			status = "disabled";
+		};
+
+		nfc_io: nfc-io@c0000000 {
+			compatible = "atmel,sama5d3-nfc-io", "syscon";
+			reg = <0xc0000000 0x8000000>;
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			hlcdc: hlcdc@f0000000 {
+				compatible = "atmel,sama5d2-hlcdc";
+				reg = <0xf0000000 0x2000>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					#pwm-cells = <3>;
+				};
+			};
+
+			isc: isc@f0008000 {
+				compatible = "atmel,sama5d2-isc";
+				reg = <0xf0008000 0x4000>;
+				interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_SYSTEM 18>, <&pmc PMC_TYPE_GCK 46>;
+				clock-names = "hclock", "iscck", "gck";
+				#clock-cells = <0>;
+				clock-output-names = "isc-mck";
+				status = "disabled";
+			};
+
+			ramc0: ramc@f000c000 {
+				compatible = "atmel,sama5d3-ddramc";
+				reg = <0xf000c000 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			dma0: dma-controller@f0010000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0010000 0x1000>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "dma_clk";
+			};
+
+			/* Place dma1 here despite its address */
+			dma1: dma-controller@f0004000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0004000 0x1000>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "dma_clk";
+			};
+
+			pmc: clock-controller@f0014000 {
+				compatible = "atmel,sama5d2-pmc", "syscon";
+				reg = <0xf0014000 0x160>;
+				interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+			};
+
+			qspi0: spi@f0020000 {
+				compatible = "atmel,sama5d2-qspi";
+				reg = <0xf0020000 0x100>, <0xd0000000 0x08000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
+				clock-names = "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			qspi1: spi@f0024000 {
+				compatible = "atmel,sama5d2-qspi";
+				reg = <0xf0024000 0x100>, <0xd8000000 0x08000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				interrupts = <53 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 53>;
+				clock-names = "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			sha: crypto@f0028000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xf0028000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(30))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "sha_clk";
+			};
+
+			aes: crypto@f002c000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xf002c000 0x100>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(26))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(27))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "aes_clk";
+			};
+
+			spi0: spi@f8000000 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf8000000 0x100>;
+				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(6))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <16>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssc0: ssc@f8004000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf8004000 0x4000>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					AT91_XDMAC_DT_PERID(21))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					AT91_XDMAC_DT_PERID(22))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			macb0: ethernet@f8008000 {
+				compatible = "atmel,sama5d2-gem";
+				reg = <0xf8008000 0x1000>;
+				interrupts = <5  IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 0 */
+					     <66 IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 1 */
+					     <67 IRQ_TYPE_LEVEL_HIGH 3>;        /* Queue 2 */
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&pmc PMC_TYPE_PERIPHERAL 5>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			tcb0: timer@f800c000 {
+				compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf800c000 0x100>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_GCK 35>, <&clk32k>;
+				clock-names = "t0_clk", "gclk", "slow_clk";
+			};
+
+			tcb1: timer@f8010000 {
+				compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf8010000 0x100>;
+				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&pmc PMC_TYPE_GCK 36>, <&clk32k>;
+				clock-names = "t0_clk", "gclk", "slow_clk";
+			};
+
+			hsmc: hsmc@f8014000 {
+				compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
+				reg = <0xf8014000 0x1000>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				pmecc: ecc-engine@f8014070 {
+					compatible = "atmel,sama5d2-pmecc";
+					reg = <0xf8014070 0x490>,
+					      <0xf8014500 0x200>;
+				};
+			};
+
+			pdmic: pdmic@f8018000 {
+				compatible = "atmel,sama5d2-pdmic";
+				reg = <0xf8018000 0x124>;
+				interrupts = <48 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(50))>;
+				dma-names = "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 48>, <&pmc PMC_TYPE_GCK 48>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			uart0: serial@f801c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf801c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(35))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(36))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart1: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(37))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(38))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart2: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(39))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(40))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8028000 {
+				compatible = "atmel,sama5d2-i2c";
+				reg = <0xf8028000 0x100>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(0))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			pwm0: pwm@f802c000 {
+				compatible = "atmel,sama5d2-pwm";
+				reg = <0xf802c000 0x4000>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				status = "disabled";
+			};
+
+			sfr: sfr@f8030000 {
+				compatible = "atmel,sama5d2-sfr", "syscon";
+				reg = <0xf8030000 0x98>;
+			};
+
+			flx0: flexcom@f8034000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8034000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8034000 0x800>;
+				status = "disabled";
+
+				uart5: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi2: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c2: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx1: flexcom@f8038000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8038000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8038000 0x800>;
+				status = "disabled";
+
+				uart6: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi3: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c3: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			securam: sram@f8044000 {
+				compatible = "atmel,sama5d2-securam", "mmio-sram";
+				reg = <0xf8044000 0x1420>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 51>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				no-memory-wc;
+				ranges = <0 0xf8044000 0x1420>;
+			};
+
+			reset_controller: reset-controller@f8048000 {
+				compatible = "atmel,sama5d3-rstc";
+				reg = <0xf8048000 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shutdown_controller: poweroff@f8048010 {
+				compatible = "atmel,sama5d2-shdwc";
+				reg = <0xf8048010 0x10>;
+				clocks = <&clk32k>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,wakeup-rtc-timer;
+			};
+
+			pit: timer@f8048030 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xf8048030 0x10>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
+			};
+
+			watchdog: watchdog@f8048040 {
+				compatible = "atmel,sama5d4-wdt";
+				reg = <0xf8048040 0x10>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			clk32k: clock-controller@f8048050 {
+				compatible = "atmel,sama5d4-sckc";
+				reg = <0xf8048050 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
+			};
+
+			rtc: rtc@f80480b0 {
+				compatible = "atmel,sama5d2-rtc";
+				reg = <0xf80480b0 0x30>;
+				interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+			};
+
+			i2s0: i2s@f8050000 {
+				compatible = "atmel,sama5d2-i2s";
+				reg = <0xf8050000 0x100>;
+				interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(31))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(32))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 54>, <&pmc PMC_TYPE_GCK 54>;
+				clock-names = "pclk", "gclk";
+				assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S0_MUX>;
+				assigned-clock-parents = <&pmc PMC_TYPE_GCK 54>;
+				status = "disabled";
+			};
+
+			can0: can@f8054000 {
+				compatible = "bosch,m_can";
+				reg = <0xf8054000 0x4000>, <0x210000 0x1c00>;
+				reg-names = "m_can", "message_ram";
+				interrupts = <56 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <64 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-names = "int0", "int1";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 56>, <&pmc PMC_TYPE_GCK 56>;
+				clock-names = "hclk", "cclk";
+				assigned-clocks = <&pmc PMC_TYPE_GCK 56>;
+				assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+				assigned-clock-rates = <40000000>;
+				bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+				status = "disabled";
+			};
+
+			spi1: spi@fc000000 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfc000000 0x100>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(8))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(9))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <16>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart3: serial@fc008000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc008000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(41))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(42))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart4: serial@fc00c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc00c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(43))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(44))>;
+				dma-names = "tx", "rx";
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			flx2: flexcom@fc010000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xfc010000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xfc010000 0x800>;
+				status = "disabled";
+
+				uart7: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi4: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c4: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx3: flexcom@fc014000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xfc014000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xfc014000 0x800>;
+				status = "disabled";
+
+				uart8: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi5: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c5: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+			};
+
+			flx4: flexcom@fc018000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xfc018000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xfc018000 0x800>;
+				status = "disabled";
+
+				uart9: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi6: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c6: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			trng@fc01c000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xfc01c000 0x100>;
+				interrupts = <47 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+			};
+
+			aic: interrupt-controller@fc020000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,sama5d2-aic";
+				interrupt-controller;
+				reg = <0xfc020000 0x200>;
+				atmel,external-irqs = <49>;
+			};
+
+			i2c1: i2c@fc028000 {
+				compatible = "atmel,sama5d2-i2c";
+				reg = <0xfc028000 0x100>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(2))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			adc: adc@fc030000 {
+				compatible = "atmel,sama5d2-adc";
+				reg = <0xfc030000 0x100>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+				clock-names = "adc_clk";
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
+				dma-names = "rx";
+				atmel,min-sample-rate-hz = <200000>;
+				atmel,max-sample-rate-hz = <20000000>;
+				atmel,startup-time-ms = <4>;
+				atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			pioA: pinctrl@fc038000 {
+				compatible = "atmel,sama5d2-pinctrl";
+				reg = <0xfc038000 0x600>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <68 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <69 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <70 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+			};
+
+			pioBU: secumod@fc040000 {
+				compatible = "atmel,sama5d2-secumod", "syscon";
+				reg = <0xfc040000 0x100>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			tdes: crypto@fc044000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xfc044000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(28))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(29))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				clock-names = "tdes_clk";
+			};
+
+			classd: classd@fc048000 {
+				compatible = "atmel,sama5d2-classd";
+				reg = <0xfc048000 0x100>;
+				interrupts = <59 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(47))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 59>, <&pmc PMC_TYPE_GCK 59>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			i2s1: i2s@fc04c000 {
+				compatible = "atmel,sama5d2-i2s";
+				reg = <0xfc04c000 0x100>;
+				interrupts = <55 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(33))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(34))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_GCK 55>;
+				clock-names = "pclk", "gclk";
+				assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S1_MUX>;
+				assigned-clock-parents = <&pmc PMC_TYPE_GCK 55>;
+				status = "disabled";
+			};
+
+			can1: can@fc050000 {
+				compatible = "bosch,m_can";
+				reg = <0xfc050000 0x4000>, <0x210000 0x3800>;
+				reg-names = "m_can", "message_ram";
+				interrupts = <57 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <65 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-names = "int0", "int1";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>;
+				clock-names = "hclk", "cclk";
+				assigned-clocks = <&pmc PMC_TYPE_GCK 57>;
+				assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+				assigned-clock-rates = <40000000>;
+				bosch,mram-cfg = <0x1c00 0 0 64 0 0 32 32>;
+				status = "disabled";
+			};
+
+			sfrbu: sfr@fc05c000 {
+				compatible = "atmel,sama5d2-sfrbu", "syscon";
+				reg = <0xfc05c000 0x20>;
+			};
+
+			chipid@fc069000 {
+				compatible = "atmel,sama5d2-chipid";
+				reg = <0xfc069000 0x8>;
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/sama5d29.dtsi b/src/arm/microchip/sama5d29.dtsi
new file mode 100644
index 0000000..17991c2
--- /dev/null
+++ b/src/arm/microchip/sama5d29.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d29.dtsi - Device Tree Include file for SAMA5D29 SoC of the SAMA5D2
+ * family.
+ *
+ *  Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries
+ *
+ *  Author: Hari Prasath <Hari.PrasathGE@microchip.com>
+ *
+ */
+
+#include "sama5d2.dtsi"
+
+&macb0 {
+	compatible = "atmel,sama5d29-gem";
+};
diff --git a/src/arm/microchip/sama5d3.dtsi b/src/arm/microchip/sama5d3.dtsi
new file mode 100644
index 0000000..d4fc0c1
--- /dev/null
+++ b/src/arm/microchip/sama5d3.dtsi
@@ -0,0 +1,1126 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC
+ *                applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel SAMA5D3 family SoC";
+	compatible = "atmel,sama5d3", "atmel,sama5";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		serial5 = &uart0;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		pwm0 = &pwm0;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0x0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <46 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x20000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			mmc0: mmc@f0000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf0000000 0x600>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+				clock-names = "mci_clk";
+			};
+
+			spi0: spi@f0004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0004000 0x100>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(1)>,
+				       <&dma0 2 AT91_DMA_CFG_PER_ID(2)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			ssc0: ssc@f0008000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0008000 0x4000>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma0 2 AT91_DMA_CFG_PER_ID(14)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			tcb0: timer@f0010000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf0010000 0x100>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			i2c0: i2c@f0014000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf0014000 0x4000>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>,
+				       <&dma0 2 AT91_DMA_CFG_PER_ID(8)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@f0018000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf0018000 0x4000>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>,
+				       <&dma0 2 AT91_DMA_CFG_PER_ID(10)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioC 26 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioC 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+				status = "disabled";
+			};
+
+			usart0: serial@f001c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf001c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@f0020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf0020000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>,
+				       <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart0: serial@f0024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf0024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pwm0: pwm@f002c000 {
+				compatible = "atmel,sama5d3-pwm";
+				reg = <0xf002c000 0x300>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				status = "disabled";
+			};
+
+			isi: isi@f0034000 {
+				compatible = "atmel,at91sam9g45-isi";
+				reg = <0xf0034000 0x4000>;
+				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			sfr: sfr@f0038000 {
+				compatible = "atmel,sama5d3-sfr", "syscon";
+				reg = <0xf0038000 0x60>;
+			};
+
+			mmc1: mmc@f8000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf8000000 0x600>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+				clock-names = "mci_clk";
+			};
+
+			spi1: spi@f8008000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf8008000 0x100>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(15)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(16)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@f800c000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf800c000 0x4000>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(4)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			adc0: adc@f8018000 {
+				compatible = "atmel,sama5d3-adc";
+				reg = <0xf8018000 0x100>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_ad6
+					&pinctrl_adc0_ad7
+					&pinctrl_adc0_ad8
+					&pinctrl_adc0_ad9
+					&pinctrl_adc0_ad10
+					&pinctrl_adc0_ad11
+					>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>,
+					 <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-channels-used = <0xfff>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-use-external-triggers;
+				atmel,adc-vref = <3000>;
+				atmel,adc-sample-hold-time = <11>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@f801c000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf801c000 0x4000>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(12)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c2>;
+				pinctrl-1 = <&pinctrl_i2c2_gpio>;
+				sda-gpios = <&pioA 18 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				status = "disabled";
+			};
+
+			usart2: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>,
+				       <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>,
+				       <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			sha: crypto@f8034000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xf8034000 0x100>;
+				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+				clock-names = "sha_clk";
+			};
+
+			aes: crypto@f8038000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xf8038000 0x100>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(19)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				clock-names = "aes_clk";
+			};
+
+			tdes: crypto@f803c000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xf803c000 0x100>;
+				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(21)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+				clock-names = "tdes_clk";
+			};
+
+			trng@f8040000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xf8040000 0x100>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
+			};
+
+			hsmc: hsmc@ffffc000 {
+				compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
+				reg = <0xffffc000 0x1000>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				pmecc: ecc-engine@ffffc070 {
+					compatible = "atmel,at91sam9g45-pmecc";
+					reg = <0xffffc070 0x490>,
+					      <0xffffc500 0x100>;
+				};
+			};
+
+			dma0: dma-controller@ffffe600 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffe600 0x200>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+				clock-names = "dma_clk";
+			};
+
+			dma1: dma-controller@ffffe800 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffe800 0x200>;
+				interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 31>;
+				clock-names = "dma_clk";
+			};
+
+			ramc0: ramc@ffffea00 {
+				compatible = "atmel,sama5d3-ddramc";
+				reg = <0xffffea00 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			dbgu: serial@ffffee00 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xffffee00 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,sama5d3-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <47>;
+			};
+
+			pinctrl: pinctrl@fffff200 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
+				ranges = <0xfffff200 0xfffff200 0xa00>;
+				atmel,mux-mask = <
+					/*   A          B          C  */
+					0xffffffff 0xc0fc0000 0xc0ff0000	/* pioA */
+					0xffffffff 0x0ff8ffff 0x00000000	/* pioB */
+					0xffffffff 0xbc00f1ff 0x7c00fc00	/* pioC */
+					0xffffffff 0xc001c0e0 0x0001c1e0	/* pioD */
+					0xffffffff 0xbf9f8000 0x18000000	/* pioE */
+					>;
+
+				/* shared pinctrl settings */
+				adc0 {
+					pinctrl_adc0_adtrg: adc0_adtrg {
+						atmel,pins =
+							<AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD19 periph A ADTRG */
+					};
+					pinctrl_adc0_ad0: adc0_ad0 {
+						atmel,pins =
+							<AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD20 periph A AD0 */
+					};
+					pinctrl_adc0_ad1: adc0_ad1 {
+						atmel,pins =
+							<AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD21 periph A AD1 */
+					};
+					pinctrl_adc0_ad2: adc0_ad2 {
+						atmel,pins =
+							<AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD22 periph A AD2 */
+					};
+					pinctrl_adc0_ad3: adc0_ad3 {
+						atmel,pins =
+							<AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD23 periph A AD3 */
+					};
+					pinctrl_adc0_ad4: adc0_ad4 {
+						atmel,pins =
+							<AT91_PIOD 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD24 periph A AD4 */
+					};
+					pinctrl_adc0_ad5: adc0_ad5 {
+						atmel,pins =
+							<AT91_PIOD 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD25 periph A AD5 */
+					};
+					pinctrl_adc0_ad6: adc0_ad6 {
+						atmel,pins =
+							<AT91_PIOD 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD26 periph A AD6 */
+					};
+					pinctrl_adc0_ad7: adc0_ad7 {
+						atmel,pins =
+							<AT91_PIOD 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD27 periph A AD7 */
+					};
+					pinctrl_adc0_ad8: adc0_ad8 {
+						atmel,pins =
+							<AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD28 periph A AD8 */
+					};
+					pinctrl_adc0_ad9: adc0_ad9 {
+						atmel,pins =
+							<AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD29 periph A AD9 */
+					};
+					pinctrl_adc0_ad10: adc0_ad10 {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD30 periph A AD10, conflicts with PCK0 */
+					};
+					pinctrl_adc0_ad11: adc0_ad11 {
+						atmel,pins =
+							<AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD31 periph A AD11, conflicts with PCK1 */
+					};
+				};
+
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ebi {
+					pinctrl_ebi_addr: ebi-addr-0 {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nand_addr: ebi-addr-1 {
+						atmel,pins =
+							<AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs0: ebi-cs0-0 {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs1: ebi-cs1-0 {
+						atmel,pins =
+							<AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs2: ebi-cs2-0 {
+						atmel,pins =
+							<AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nwait: ebi-nwait-0 {
+						atmel,pins =
+							<AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nwr1_nbs1: ebi-nwr1-nbs1-0 {
+						atmel,pins =
+							<AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */
+					};
+
+					pinctrl_i2c0_gpio: i2c0-gpio {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */
+							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */
+					};
+
+					pinctrl_i2c1_gpio: i2c1-gpio {
+						atmel,pins =
+							<AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOC 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2: i2c2-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */
+							 AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */
+					};
+
+					pinctrl_i2c2_gpio: i2c2-gpio {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOA 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				isi {
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
+						atmel,pins =
+							<AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA16 periph C ISI_D0, conflicts with LCDDAT16 */
+							 AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA17 periph C ISI_D1, conflicts with LCDDAT17 */
+							 AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */
+							 AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */
+							 AT91_PIOA 20 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */
+							 AT91_PIOA 21 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */
+							 AT91_PIOA 22 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */
+							 AT91_PIOA 23 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */
+							 AT91_PIOC 30 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC30 periph C ISI_PCK, conflicts with UTXD0 */
+							 AT91_PIOA 31 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */
+							 AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
+					};
+
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
+							 AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */
+					};
+
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC27 periph C ISI_PD10, conflicts with SPI1_NPCS2, TWCK1 */
+							 AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC26 periph C ISI_PD11, conflicts with SPI1_NPCS1, TWD1 */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD9 periph A MCI0_CK */
+							 AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD0 periph A MCI0_CDA with pullup */
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD1 periph A MCI0_DA0 with pullup */
+					};
+					pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
+						atmel,pins =
+							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD2 periph A MCI0_DA1 with pullup */
+							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD3 periph A MCI0_DA2 with pullup */
+							 AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD4 periph A MCI0_DA3 with pullup */
+					};
+					pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */
+							 AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */
+							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD7 periph A MCI0_DA6 with pullup, conflicts with TCLK0, PWMH3 */
+							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB24 periph A MCI1_CK, conflicts with GRX5 */
+							 AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */
+							 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */
+					};
+					pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
+						atmel,pins =
+							<AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */
+							 AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */
+							 AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */
+					};
+				};
+
+				nand0 {
+					pinctrl_nand0_ale_cle: nand0_ale_cle-0 {
+						atmel,pins =
+							<AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PE21 periph A with pullup */
+							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PE22 periph A with pullup */
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm0_pwmh0_0: pwm0_pwmh0-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D4 and LCDDAT20 */
+					};
+					pinctrl_pwm0_pwmh0_1: pwm0_pwmh0-1 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTX0 */
+					};
+					pinctrl_pwm0_pwml0_0: pwm0_pwml0-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D5 and LCDDAT21 */
+					};
+					pinctrl_pwm0_pwml0_1: pwm0_pwml0-1 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTX1 */
+					};
+
+					pinctrl_pwm0_pwmh1_0: pwm0_pwmh1-0 {
+						atmel,pins =
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D6 and LCDDAT22 */
+					};
+					pinctrl_pwm0_pwmh1_1: pwm0_pwmh1-1 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRX0 */
+					};
+					pinctrl_pwm0_pwmh1_2: pwm0_pwmh1-2 {
+						atmel,pins =
+							<AT91_PIOB 27 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with G125CKO and RTS1 */
+					};
+					pinctrl_pwm0_pwml1_0: pwm0_pwml1-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D7 and LCDDAT23 */
+					};
+					pinctrl_pwm0_pwml1_1: pwm0_pwml1-1 {
+						atmel,pins =
+							<AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRX1 */
+					};
+					pinctrl_pwm0_pwml1_2: pwm0_pwml1-2 {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with IRQ */
+					};
+
+					pinctrl_pwm0_pwmh2_0: pwm0_pwmh2-0 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTXCK */
+					};
+					pinctrl_pwm0_pwmh2_1: pwm0_pwmh2-1 {
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA4 and TIOA0 */
+					};
+					pinctrl_pwm0_pwml2_0: pwm0_pwml2-0 {
+						atmel,pins =
+							<AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTXEN */
+					};
+					pinctrl_pwm0_pwml2_1: pwm0_pwml2-1 {
+						atmel,pins =
+							<AT91_PIOD 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA5 and TIOB0 */
+					};
+
+					pinctrl_pwm0_pwmh3_0: pwm0_pwmh3-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRXDV */
+					};
+					pinctrl_pwm0_pwmh3_1: pwm0_pwmh3-1 {
+						atmel,pins =
+							<AT91_PIOD 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA6 and TCLK0 */
+					};
+					pinctrl_pwm0_pwml3_0: pwm0_pwml3-0 {
+						atmel,pins =
+							<AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRXER */
+					};
+					pinctrl_pwm0_pwml3_1: pwm0_pwml3-1 {
+						atmel,pins =
+							<AT91_PIOD 8 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA7 */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD10 periph A SPI0_MISO pin */
+							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD11 periph A SPI0_MOSI pin */
+							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD12 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC22 periph A SPI1_MISO pin */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC23 periph A SPI1_MOSI pin */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC24 periph A SPI1_SPCK pin */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC16 periph A TK0 */
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC17 periph A TF0 */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC18 periph A TD0 */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx {
+						atmel,pins =
+							<AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC19 periph A RK0 */
+							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC20 periph A RF0 */
+							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC21 periph A RD0 */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx {
+						atmel,pins =
+							<AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB2 periph B TK1, conflicts with GTX2 */
+							 AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB3 periph B TF1, conflicts with GTX3 */
+							 AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB6 periph B TD1, conflicts with TD1 */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx {
+						atmel,pins =
+							<AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB7 periph B RK1, conflicts with EREFCK */
+							 AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB10 periph B RF1, conflicts with GTXER */
+							 AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB11 periph B RD1, conflicts with GRXCK */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* conflicts with PWMFI2, ISI_D8 */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* conflicts with ISI_PCK */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* conflicts with TWD0, ISI_VSYNC */
+							 AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with TWCK0, ISI_HSYNC */
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */
+							 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_rts_cts: usart1_rts_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB26 periph A, conflicts with GRX7 */
+							 AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB27 periph A, conflicts with G125CKO */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* conflicts with A25 */
+							 AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts NCS0 */
+					};
+
+					pinctrl_usart2_rts_cts: usart2_rts_cts-0 {
+						atmel,pins =
+							<AT91_PIOE 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PE23 periph B, conflicts with A23 */
+							 AT91_PIOE 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PE24 periph B, conflicts with A24 */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* conflicts with A18 */
+							 AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with A19 */
+					};
+
+					pinctrl_usart3_rts_cts: usart3_rts_cts-0 {
+						atmel,pins =
+							<AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PE16 periph B, conflicts with A16 */
+							 AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PE17 periph B, conflicts with A17 */
+					};
+				};
+
+
+				pioA: gpio@fffff200 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff200 0x100>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				};
+
+				pioB: gpio@fffff400 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x100>;
+					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				};
+
+				pioC: gpio@fffff600 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x100>;
+					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				};
+
+				pioD: gpio@fffff800 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x100>;
+					interrupts = <9 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				};
+
+				pioE: gpio@fffffa00 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x100>;
+					interrupts = <10 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				};
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,sama5d3-pmc", "syscon";
+				reg = <0xfffffc00 0x120>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+			};
+
+			reset_controller: reset-controller@fffffe00 {
+				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
+				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shutdown_controller: poweroff@fffffe10 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffe30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe30 0xf>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			watchdog: watchdog@fffffe40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffe40 0x10>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			clk32k: clock-controller@fffffe50 {
+				compatible = "atmel,sama5d3-sckc";
+				reg = <0xfffffe50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
+			};
+
+			rtc@fffffeb0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffeb0 0x30>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+			};
+		};
+
+		nfc_sram: sram@200000 {
+			compatible = "mmio-sram";
+			no-memory-wc;
+			reg = <0x200000 0x2400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x200000 0x2400>;
+		};
+
+		usb0: gadget@500000 {
+			compatible = "atmel,sama5d3-udc";
+			reg = <0x00500000 0x100000
+			       0xf8030000 0x4000>;
+			interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 33>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		usb1: ohci@600000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: ehci@700000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 32>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,sama5d3-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&hsmc>;
+			reg = <0x10000000 0x10000000
+			       0x40000000 0x30000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x40000000 0x10000000
+				  0x2 0x0 0x50000000 0x10000000
+				  0x3 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,sama5d3-nand-controller";
+				atmel,nfc-sram = <&nfc_sram>;
+				atmel,nfc-io = <&nfc_io>;
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		nfc_io: nfc-io@70000000 {
+			compatible = "atmel,sama5d3-nfc-io", "syscon";
+			reg = <0x70000000 0x8000000>;
+		};
+	};
+};
diff --git a/src/arm/microchip/sama5d31.dtsi b/src/arm/microchip/sama5d31.dtsi
new file mode 100644
index 0000000..cbe8f27
--- /dev/null
+++ b/src/arm/microchip/sama5d31.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d31.dtsi - Device Tree Include file for SAMA5D31 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_uart.dtsi"
+
+/ {
+	compatible = "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/src/arm/microchip/sama5d31ek.dts b/src/arm/microchip/sama5d31ek.dts
new file mode 100644
index 0000000..1f2dfb3
--- /dev/null
+++ b/src/arm/microchip/sama5d31ek.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d31ek.dts - Device Tree file for SAMA5D31-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d31.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_emac.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D31-EK";
+	compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	leds {
+		led-d3 {
+			label = "d3";
+			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/src/arm/microchip/sama5d33.dtsi b/src/arm/microchip/sama5d33.dtsi
new file mode 100644
index 0000000..146fd59
--- /dev/null
+++ b/src/arm/microchip/sama5d33.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d33.dtsi - Device Tree Include file for SAMA5D33 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_gmac.dtsi"
+
+/ {
+	compatible = "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/src/arm/microchip/sama5d33ek.dts b/src/arm/microchip/sama5d33ek.dts
new file mode 100644
index 0000000..7d4ae16
--- /dev/null
+++ b/src/arm/microchip/sama5d33ek.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d33ek.dts - Device Tree file for SAMA5D33-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d33.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D33-EK";
+	compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/src/arm/microchip/sama5d34.dtsi b/src/arm/microchip/sama5d34.dtsi
new file mode 100644
index 0000000..132918c
--- /dev/null
+++ b/src/arm/microchip/sama5d34.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d34.dtsi - Device Tree Include file for SAMA5D34 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_mci2.dtsi"
+
+/ {
+	compatible = "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/src/arm/microchip/sama5d34ek.dts b/src/arm/microchip/sama5d34ek.dts
new file mode 100644
index 0000000..bffd613
--- /dev/null
+++ b/src/arm/microchip/sama5d34ek.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d34ek.dts - Device Tree file for SAMA5D34-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d34.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D34-EK";
+	compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+
+				24c256@50 {
+					compatible = "atmel,24c256";
+					reg = <0x50>;
+					pagesize = <64>;
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+		};
+	};
+
+	leds {
+		led-d3 {
+			label = "d3";
+			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/src/arm/microchip/sama5d35.dtsi b/src/arm/microchip/sama5d35.dtsi
new file mode 100644
index 0000000..b2ccfa7
--- /dev/null
+++ b/src/arm/microchip/sama5d35.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d35.dtsi - Device Tree Include file for SAMA5D35 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_uart.dtsi"
+#include "sama5d3_tcb1.dtsi"
+
+/ {
+	compatible = "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/src/arm/microchip/sama5d35ek.dts b/src/arm/microchip/sama5d35ek.dts
new file mode 100644
index 0000000..8edfceb
--- /dev/null
+++ b/src/arm/microchip/sama5d35ek.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d35ek.dts - Device Tree file for SAMA5D35-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d35.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_emac.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
+
+/ {
+	model = "Atmel SAMA5D35-EK";
+	compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+
+			isi: isi@f0034000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pb_user1 {
+			label = "pb_user1";
+			gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/src/arm/microchip/sama5d36.dtsi b/src/arm/microchip/sama5d36.dtsi
new file mode 100644
index 0000000..5d88f99
--- /dev/null
+++ b/src/arm/microchip/sama5d36.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d36.dtsi - Device Tree Include file for SAMA5D36 SoC
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Josh Wu <josh.wu@atmel.com>
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_tcb1.dtsi"
+#include "sama5d3_uart.dtsi"
+
+/ {
+	compatible = "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/src/arm/microchip/sama5d36ek.dts b/src/arm/microchip/sama5d36ek.dts
new file mode 100644
index 0000000..26950f9
--- /dev/null
+++ b/src/arm/microchip/sama5d36ek.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d36ek.dts - Device Tree file for SAMA5D36-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Josh Wu <josh.wu@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xdm.dtsi"
+#include "sama5d3xmb_emac.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
+
+/ {
+	model = "Atmel SAMA5D36-EK";
+	compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/src/arm/microchip/sama5d36ek_cmp.dts b/src/arm/microchip/sama5d36ek_cmp.dts
new file mode 100644
index 0000000..66695b9
--- /dev/null
+++ b/src/arm/microchip/sama5d36ek_cmp.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d36ek_cmp.dts - Device Tree file for SAMA5D36-EK CMP board
+ *
+ *  Copyright (C) 2016 Atmel,
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+#include "sama5d3xmb_cmp.dtsi"
+
+/ {
+	model = "Atmel SAMA5D36EK-CMP";
+	compatible = "atmel,sama5d36ek-cmp", "atmel,sama5d3xmb-cmp", "atmel,sama5d3xcm-cmp", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/src/arm/microchip/sama5d3_can.dtsi b/src/arm/microchip/sama5d3_can.dtsi
new file mode 100644
index 0000000..9ac29bf
--- /dev/null
+++ b/src/arm/microchip/sama5d3_can.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sama5d3_can.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * CAN support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				can0 {
+					pinctrl_can0_rx_tx: can0_rx_tx {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */
+							 AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */
+					};
+				};
+
+				can1 {
+					pinctrl_can1_rx_tx: can1_rx_tx {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB14 periph B RX, conflicts with GCRS */
+							 AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB15 periph B TX, conflicts with GCOL */
+					};
+				};
+
+			};
+
+			can0: can@f000c000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf000c000 0x300>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can0_rx_tx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			can1: can@f8010000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf8010000 0x300>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_rx_tx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/sama5d3_emac.dtsi b/src/arm/microchip/sama5d3_emac.dtsi
new file mode 100644
index 0000000..5d7ce13
--- /dev/null
+++ b/src/arm/microchip/sama5d3_emac.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sama5d3_emac.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * Ethernet.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC0 periph A ETX0, conflicts with TIOA3 */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC1 periph A ETX1, conflicts with TIOB3 */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC2 periph A ERX0, conflicts with TCLK3 */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC3 periph A ERX1, conflicts with TIOA4 */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC4 periph A ETXEN, conflicts with TIOB4 */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC5 periph A ECRSDV,conflicts with TCLK4 */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 periph A ERXER, conflicts with TIOA5 */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 periph A EREFCK, conflicts with TIOB5 */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 periph A EMDC, conflicts with TCLK5 */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC9 periph A EMDIO  */
+					};
+				};
+			};
+
+			pmc: clock-controller@fffffc00 {
+			};
+
+			macb1: ethernet@f802c000 {
+				compatible = "atmel,sama5d3-macb", "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xf802c000 0x100>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_PERIPHERAL 35>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/sama5d3_gmac.dtsi b/src/arm/microchip/sama5d3_gmac.dtsi
new file mode 100644
index 0000000..884df7a
--- /dev/null
+++ b/src/arm/microchip/sama5d3_gmac.dtsi
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sama5d3_gmac.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * Gigabit Ethernet.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				macb0 {
+					pinctrl_macb0_data_rgmii: macb0_data_rgmii {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A GTX0, conflicts with PWMH0 */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A GTX1, conflicts with PWML0 */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A GTX2, conflicts with TK1 */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A GTX3, conflicts with TF1 */
+							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A GRX0, conflicts with PWMH1 */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A GRX1, conflicts with PWML1 */
+							 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A GRX2, conflicts with TD1 */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB7 periph A GRX3, conflicts with RK1 */
+					};
+					pinctrl_macb0_data_gmii: macb0_data_gmii {
+						atmel,pins =
+							<AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB19 periph B GTX4, conflicts with MCI1_CDA */
+							 AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB20 periph B GTX5, conflicts with MCI1_DA0 */
+							 AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB21 periph B GTX6, conflicts with MCI1_DA1 */
+							 AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB22 periph B GTX7, conflicts with MCI1_DA2 */
+							 AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB23 periph B GRX4, conflicts with MCI1_DA3 */
+							 AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB24 periph B GRX5, conflicts with MCI1_CK */
+							 AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB25 periph B GRX6, conflicts with SCK1 */
+							 AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB26 periph B GRX7, conflicts with CTS1 */
+					};
+					pinctrl_macb0_signal_rgmii: macb0_signal_rgmii {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB8 periph A GTXCK, conflicts with PWMH2 */
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A GTXEN, conflicts with PWML2 */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A GRXCK, conflicts with RD1 */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A GRXER, conflicts with PWML3 */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A GMDC */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A GMDIO */
+							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A G125CK */
+					};
+					pinctrl_macb0_signal_gmii: macb0_signal_gmii {
+						atmel,pins =
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A GTXEN, conflicts with PWML2 */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB10 periph A GTXER, conflicts with RF1 */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A GRXCK, conflicts with RD1 */
+							 AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A GRXDV, conflicts with PWMH3 */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A GRXER, conflicts with PWML3 */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A GCRS, conflicts with CANRX1 */
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A GCOL, conflicts with CANTX1 */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A GMDC */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A GMDIO */
+							 AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB27 periph B G125CKO */
+					};
+
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				compatible = "atmel,sama5d3-gem";
+				reg = <0xf0028000 0x100>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_PERIPHERAL 34>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/sama5d3_lcd.dtsi b/src/arm/microchip/sama5d3_lcd.dtsi
new file mode 100644
index 0000000..308d2fc
--- /dev/null
+++ b/src/arm/microchip/sama5d3_lcd.dtsi
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sama5d3_lcd.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * LCD support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			hlcdc: hlcdc@f0030000 {
+				compatible = "atmel,sama5d3-hlcdc";
+				reg = <0xf0030000 0x2000>;
+				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_pwm>;
+					#pwm-cells = <3>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				lcd {
+					pinctrl_lcd_base: lcd-base-0 {
+						atmel,pins =
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+							 AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+					};
+
+					pinctrl_lcd_pwm: lcd-pwm-0 {
+						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+					};
+
+					pinctrl_lcd_rgb444: lcd-rgb-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD11 pin */
+					};
+
+					pinctrl_lcd_rgb565: lcd-rgb-1 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD15 pin */
+					};
+
+					pinctrl_lcd_rgb666: lcd-rgb-2 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD17 pin */
+					};
+
+					pinctrl_lcd_rgb666_alt: lcd-rgb-2-alt {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* LCDD17 pin */
+					};
+
+					pinctrl_lcd_rgb888: lcd-rgb-3 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+
+					pinctrl_lcd_rgb888_alt: lcd-rgb-3-alt {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/sama5d3_mci2.dtsi b/src/arm/microchip/sama5d3_mci2.dtsi
new file mode 100644
index 0000000..7141ee9
--- /dev/null
+++ b/src/arm/microchip/sama5d3_mci2.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sama5d3_mci2.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * 3 MMC ports
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				mmc2 {
+					pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC15 periph A MCI2_CK, conflicts with PCK2 */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC10 periph A MCI2_CDA with pullup */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC11 periph A MCI2_DA0 with pullup */
+					};
+					pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
+						atmel,pins =
+							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
+					};
+				};
+			};
+
+			mmc2: mmc@f8004000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf8004000 0x600>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(1)>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+				clock-names = "mci_clk";
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/sama5d3_tcb1.dtsi b/src/arm/microchip/sama5d3_tcb1.dtsi
new file mode 100644
index 0000000..2b18c5c
--- /dev/null
+++ b/src/arm/microchip/sama5d3_tcb1.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sama5d3_tcb1.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * 2 TC blocks.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	aliases {
+		tcb1 = &tcb1;
+	};
+
+	ahb {
+		apb {
+			tcb1: timer@f8014000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf8014000 0x100>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/sama5d3_uart.dtsi b/src/arm/microchip/sama5d3_uart.dtsi
new file mode 100644
index 0000000..44d1173
--- /dev/null
+++ b/src/arm/microchip/sama5d3_uart.dtsi
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sama5d3_uart.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * UART support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	aliases {
+		serial5 = &uart0;
+		serial6 = &uart1;
+	};
+
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* conflicts with PWMFI2, ISI_D8 */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* conflicts with ISI_PCK */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* conflicts with TWD0, ISI_VSYNC */
+							 AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with TWCK0, ISI_HSYNC */
+					};
+				};
+			};
+
+			uart0: serial@f0024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf0024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart1: serial@f8028000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8028000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/sama5d3xcm.dtsi b/src/arm/microchip/sama5d3xcm.dtsi
new file mode 100644
index 0000000..7d1d785
--- /dev/null
+++ b/src/arm/microchip/sama5d3xcm.dtsi
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d3xcm.dtsi - Device Tree Include file for SAMA5D3x CPU Module
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+
+/ {
+	compatible = "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+			};
+
+			tcb0: timer@f0010000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+		};
+
+		ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_addr &pinctrl_ebi_cs0>;
+			pinctr-name = "default";
+			status = "okay";
+
+			nor: flash@0,0 {
+				compatible = "cfi-flash";
+				linux,mtd-name = "physmap-flash.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x0 0x0 0x1000000>;
+				bank-width = <2>;
+				atmel,smc-read-mode = "nrd";
+				atmel,smc-write-mode = "nwe";
+				atmel,smc-bus-width = <16>;
+				atmel,smc-ncs-rd-setup-ns = <0>;
+				atmel,smc-ncs-wr-setup-ns = <0>;
+				atmel,smc-nwe-setup-ns = <8>;
+				atmel,smc-nrd-setup-ns = <16>;
+				atmel,smc-ncs-rd-pulse-ns = <84>;
+				atmel,smc-ncs-wr-pulse-ns = <84>;
+				atmel,smc-nrd-pulse-ns = <76>;
+				atmel,smc-nwe-pulse-ns = <76>;
+				atmel,smc-nrd-cycle-ns = <107>;
+				atmel,smc-nwe-cycle-ns = <84>;
+				atmel,smc-tdf-ns = <16>;
+			};
+
+			nand_controller: nand-controller {
+				status = "okay";
+
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-ecc-mode = "hw";
+					nand-ecc-strength = <4>;
+					nand-ecc-step-size = <512>;
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0x80000>;
+						};
+
+						bootloaderenv@c0000 {
+							label = "bootloader env";
+							reg = <0xc0000 0xc0000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-d2 {
+			label = "d2";
+			gpios = <&pioE 25 GPIO_ACTIVE_LOW>;	/* PE25, conflicts with A25, RXD2 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/src/arm/microchip/sama5d3xcm_cmp.dtsi b/src/arm/microchip/sama5d3xcm_cmp.dtsi
new file mode 100644
index 0000000..830a095
--- /dev/null
+++ b/src/arm/microchip/sama5d3xcm_cmp.dtsi
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d3xcm_cmp.dtsi - Device Tree Include file for SAMA5D36 CMP CPU Module
+ *
+ *  Copyright (C) 2016 Atmel,
+ */
+
+/ {
+	compatible = "atmel,sama5d3xcm-cmp", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+			};
+
+			tcb0: timer@f0010000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+			};
+
+			i2c1: i2c@f0018000 {
+				pmic: act8865@5b {
+					compatible = "active-semi,act8865";
+					reg = <0x5b>;
+					status = "disabled";
+
+					regulators {
+						vcc_1v8_reg: DCDC_REG1 {
+							regulator-name = "VCC_1V8";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-always-on;
+						};
+
+						vcc_1v2_reg: DCDC_REG2 {
+							regulator-name = "VCC_1V2";
+							regulator-min-microvolt = <1100000>;
+							regulator-max-microvolt = <1300000>;
+							regulator-always-on;
+						};
+
+						vcc_3v3_reg: DCDC_REG3 {
+							regulator-name = "VCC_3V3";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vddana_reg: LDO_REG1 {
+							regulator-name = "VDDANA";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vddfuse_reg: LDO_REG2 {
+							regulator-name = "FUSE_2V5";
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+						};
+					};
+				};
+			};
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-ecc-strength = <4>;
+					nand-ecc-step-size = <512>;
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0x80000>;
+						};
+
+						bootloaderenv@c0000 {
+							label = "bootloader env";
+							reg = <0xc0000 0xc0000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-d2 {
+			label = "d2";
+			gpios = <&pioE 25 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/src/arm/microchip/sama5d3xdm.dtsi b/src/arm/microchip/sama5d3xdm.dtsi
new file mode 100644
index 0000000..3c1c4d6
--- /dev/null
+++ b/src/arm/microchip/sama5d3xdm.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d3dm.dtsi - Device Tree file for SAMA5 display module
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+
+/ {
+	ahb {
+		apb {
+			i2c1: i2c@f0018000 {
+				qt1070: keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioE>;
+					interrupts = <31 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+					wakeup-source;
+				};
+			};
+
+			adc0: adc@f8018000 {
+				atmel,adc-ts-wires = <4>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+				status = "okay";
+			};
+
+			pinctrl@fffff200 {
+				board {
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pull up deglith */
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/sama5d3xmb.dtsi b/src/arm/microchip/sama5d3xmb.dtsi
new file mode 100644
index 0000000..3652c9e
--- /dev/null
+++ b/src/arm/microchip/sama5d3xmb.dtsi
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d3xmb.dts - Device Tree file for SAMA5D3x mother board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+#include "sama5d3xcm.dtsi"
+
+/ {
+	compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			mmc0: mmc@f0000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			spi0: spi@f0004000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for spi0 */
+
+				flash@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			ssc0: ssc@f0008000 {
+				atmel,clk-from-rk-pin;
+			};
+
+			/*
+			 * i2c0 conflicts with ISI:
+			 * disable it to allow the use of ISI
+			 * can not enable audio when i2c0 disabled
+			 */
+			i2c0: i2c@f0014000 {
+				wm8904: wm8904@1a {
+					compatible = "wlf,wm8904";
+					reg = <0x1a>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+					clock-names = "mclk";
+				};
+			};
+
+			i2c1: i2c@f0018000 {
+				ov2640: camera@30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+					/* use pck1 for the master clock of ov2640 */
+					clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+					assigned-clock-rates = <25000000>;
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
+			};
+
+			usart1: serial@f0020000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for usart1 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+				status = "okay";
+			};
+
+			isi: isi@f0034000 {
+				port {
+					isi_0: endpoint {
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
+					};
+				};
+			};
+
+			mmc1: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			adc0: adc@f8018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				status = "okay";
+			};
+
+			pinctrl@fffff200 {
+				board {
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD17 GPIO with pullup deglitch */
+					};
+
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD18 GPIO with pullup deglitch */
+					};
+
+					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD30 periph B */
+					};
+
+					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+						atmel,pins =
+							<AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD31 periph B ISI_MCK */
+					};
+
+					pinctrl_sensor_reset: sensor_reset-0 {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;   /* PE24 gpio */
+					};
+
+					pinctrl_sensor_power: sensor_power-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PD29 GPIO with deglitch */
+					};
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+				status = "okay";
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+		};
+
+		usb0: gadget@500000 {
+			atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@600000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH
+					   &pioD 26 GPIO_ACTIVE_LOW
+					   &pioD 27 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@700000 {
+			status = "okay";
+		};
+	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+		atmel,model = "wm8904 @ SAMA5D3EK";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+
+		status = "disabled";
+	};
+};
diff --git a/src/arm/microchip/sama5d3xmb_cmp.dtsi b/src/arm/microchip/sama5d3xmb_cmp.dtsi
new file mode 100644
index 0000000..5d9e97f
--- /dev/null
+++ b/src/arm/microchip/sama5d3xmb_cmp.dtsi
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d3xmb_cmp.dts - Device Tree file for SAMA5D3x CMP mother board
+ *
+ *  Copyright (C) 2016 Atmel,
+ */
+#include "sama5d3xcm_cmp.dtsi"
+
+/ {
+	compatible = "atmel,sama5d3xmb-cmp", "atmel,sama5d3xcm-cmp", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			mmc0: mmc@f0000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			spi0: spi@f0004000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for spi0 */
+
+				flash@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			ssc0: ssc@f0008000 {
+				atmel,clk-from-rk-pin;
+			};
+
+			/*
+			 * i2c0 conflicts with ISI:
+			 * disable it to allow the use of ISI
+			 * can not enable audio when i2c0 disabled
+			 */
+			i2c0: i2c@f0014000 {
+				wm8904: wm8904@1a {
+					compatible = "wlf,wm8904";
+					reg = <0x1a>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+					clock-names = "mclk";
+				};
+			};
+
+			i2c1: i2c@f0018000 {
+				ov2640: camera@30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+					/* use pck1 for the master clock of ov2640 */
+					clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+					assigned-clock-rates = <25000000>;
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
+			};
+
+			usart1: serial@f0020000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for usart1 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+				status = "okay";
+			};
+
+			isi: isi@f0034000 {
+				port {
+					isi_0: endpoint {
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
+					};
+				};
+			};
+
+			mmc1: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			adc0: adc@f8018000 {
+				pinctrl-names = "default", "sleep";
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				pinctrl-1 = <
+					&pinctrl_adc0_adtrg_sleep
+					&pinctrl_adc0_ad0_sleep
+					&pinctrl_adc0_ad1_sleep
+					&pinctrl_adc0_ad2_sleep
+					&pinctrl_adc0_ad3_sleep
+					&pinctrl_adc0_ad4_sleep
+					>;
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy0: ethernet-phy@1 {
+					/*interrupt-parent = <&pioE>;*/
+					/*interrupts = <30 IRQ_TYPE_EDGE_FALLING>;*/
+					reg = <1>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				adc0 {
+					pinctrl_adc0_adtrg_sleep: adc0_adtrg_1 {
+						atmel,pins =
+							<AT91_PIOD 19 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+					};
+					pinctrl_adc0_ad0_sleep: adc0_ad0_1 {
+						atmel,pins =
+							<AT91_PIOD 20 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+					};
+					pinctrl_adc0_ad1_sleep: adc0_ad1_1 {
+						atmel,pins =
+							<AT91_PIOD 21 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+					};
+					pinctrl_adc0_ad2_sleep: adc0_ad2_1 {
+						atmel,pins =
+							<AT91_PIOD 22 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+					};
+					pinctrl_adc0_ad3_sleep: adc0_ad3_1 {
+						atmel,pins =
+							<AT91_PIOD 23 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+					};
+					pinctrl_adc0_ad4_sleep: adc0_ad4_1 {
+						atmel,pins =
+							<AT91_PIOD 24 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+					};
+				};
+
+				board {
+					pinctrl_gpio_keys: gpio_keys {
+						atmel,pins =
+							<AT91_PIOE 27 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+						atmel,pins =
+							<AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_reset: sensor_reset-0 {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_power: sensor_power-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+				status = "okay";
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+		};
+
+		usb0: gadget@500000 {
+			atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+		atmel,model = "wm8904 @ SAMA5D3EK";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+
+		status = "disabled";
+	};
+
+	/* Conflict with LCD pins */
+	gpio_keys {
+		compatible = "gpio-keys";
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		pb_user1 {
+			label = "pb_user1";
+			gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/src/arm/microchip/sama5d3xmb_emac.dtsi b/src/arm/microchip/sama5d3xmb_emac.dtsi
new file mode 100644
index 0000000..a5dd41c
--- /dev/null
+++ b/src/arm/microchip/sama5d3xmb_emac.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d3xmb_emac.dts - Device Tree Include file for SAMA5D3x mother board
+ * Ethernet
+ *
+ *  Copyright (C) 2016 Atmel,
+ */
+
+/ {
+	ahb {
+		apb {
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&pioE>;
+					interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+					reg = <1>;
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/sama5d3xmb_gmac.dtsi b/src/arm/microchip/sama5d3xmb_gmac.dtsi
new file mode 100644
index 0000000..d750da3
--- /dev/null
+++ b/src/arm/microchip/sama5d3xmb_gmac.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d3xmb_gmac.dtsi - Device Tree Include file for SAMA5D3x motherboard
+ * Gigabit Ethernet
+ *
+ *  Copyright (C) 2016 Atmel,
+ */
+
+/ {
+	ahb {
+		apb {
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/sama5d4.dtsi b/src/arm/microchip/sama5d4.dtsi
new file mode 100644
index 0000000..58ceed9
--- /dev/null
+++ b/src/arm/microchip/sama5d4.dtsi
@@ -0,0 +1,1453 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d4.dtsi - Device Tree Include file for SAMA5D4 family SoC
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel SAMA5D4 family SoC";
+	compatible = "atmel,sama5d4";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &usart3;
+		serial1 = &usart4;
+		serial2 = &usart2;
+		serial3 = &usart0;
+		serial4 = &usart1;
+		serial5 = &uart0;
+		serial6 = &uart1;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		pwm0 = &pwm0;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	ns_sram: sram@210000 {
+		compatible = "mmio-sram";
+		reg = <0x00210000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00210000 0x10000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		nfc_sram: sram@100000 {
+			compatible = "mmio-sram";
+			no-memory-wc;
+			reg = <0x100000 0x2400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x100000 0x2400>;
+		};
+
+		vdec0: vdec@300000 {
+			compatible = "microchip,sama5d4-vdec";
+			reg = <0x00300000 0x100000>;
+			interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+		};
+
+		usb0: gadget@400000 {
+			compatible = "atmel,sama5d3-udc";
+			reg = <0x00400000 0x100000
+			       0xfc02c000 0x4000>;
+			interrupts = <47 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		usb1: ohci@500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: ehci@600000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 46>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		L2: cache-controller@a00000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a00000 0x1000>;
+			interrupts = <67 IRQ_TYPE_LEVEL_HIGH 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,sama5d3-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&hsmc>;
+			reg = <0x10000000 0x10000000
+			       0x60000000 0x28000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x60000000 0x10000000
+				  0x2 0x0 0x70000000 0x10000000
+				  0x3 0x0 0x80000000 0x8000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,sama5d3-nand-controller";
+				atmel,nfc-sram = <&nfc_sram>;
+				atmel,nfc-io = <&nfc_io>;
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		nfc_io: nfc-io@90000000 {
+			compatible = "atmel,sama5d3-nfc-io", "syscon";
+			reg = <0x90000000 0x8000000>;
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			hlcdc: hlcdc@f0000000 {
+				compatible = "atmel,sama5d4-hlcdc";
+				reg = <0xf0000000 0x4000>;
+				interrupts = <51 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_pwm>;
+					#pwm-cells = <3>;
+				};
+			};
+
+			dma1: dma-controller@f0004000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0004000 0x200>;
+				interrupts = <50 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 50>;
+				clock-names = "dma_clk";
+			};
+
+			isi: isi@f0008000 {
+				compatible = "atmel,at91sam9g45-isi";
+				reg = <0xf0008000 0x4000>;
+				interrupts = <52 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			ramc0: ramc@f0010000 {
+				compatible = "atmel,sama5d3-ddramc";
+				reg = <0xf0010000 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			dma0: dma-controller@f0014000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0014000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "dma_clk";
+			};
+
+			pmc: clock-controller@f0018000 {
+				compatible = "atmel,sama5d4-pmc", "syscon";
+				reg = <0xf0018000 0x120>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+			};
+
+			mmc0: mmc@f8000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf8000000 0x600>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(0))>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
+				clock-names = "mci_clk";
+			};
+
+			uart0: serial@f8004000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8004000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(22))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(23))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@f8008000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf8008000 0x4000>;
+				interrupts = <48 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(26))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(27))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			pwm0: pwm@f800c000 {
+				compatible = "atmel,sama5d3-pwm";
+				reg = <0xf800c000 0x300>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				status = "disabled";
+			};
+
+			spi0: spi@f8010000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf8010000 0x100>;
+				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(10))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(11))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8014000 {
+				compatible = "atmel,sama5d4-i2c";
+				reg = <0xf8014000 0x4000>;
+				interrupts = <32 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(2))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@f8018000 {
+				compatible = "atmel,sama5d4-i2c";
+				reg = <0xf8018000 0x4000>;
+				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(4))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(5))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioE 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+				status = "disabled";
+			};
+
+			tcb0: timer@f801c000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf801c000 0x100>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			macb0: ethernet@f8020000 {
+				compatible = "atmel,sama5d4-gem";
+				reg = <0xf8020000 0x100>;
+				interrupts = <54 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 54>, <&pmc PMC_TYPE_PERIPHERAL 54>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			i2c2: i2c@f8024000 {
+				compatible = "atmel,sama5d4-i2c";
+				reg = <0xf8024000 0x4000>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(6))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c2>;
+				pinctrl-1 = <&pinctrl_i2c2_gpio>;
+				sda-gpios = <&pioB 29 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioB 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+				status = "disabled";
+			};
+
+			sfr: sfr@f8028000 {
+				compatible = "atmel,sama5d4-sfr", "syscon";
+				reg = <0xf8028000 0x60>;
+			};
+
+			usart0: serial@f802c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf802c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(36))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(37))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts &pinctrl_usart0_cts>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@f8030000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8030000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(38))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(39))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts &pinctrl_usart1_cts>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			mmc1: mmc@fc000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfc000000 0x600>;
+				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 36>;
+				clock-names = "mci_clk";
+			};
+
+			uart1: serial@fc004000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc004000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(24))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(25))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fc008000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc008000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(16))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(17))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts &pinctrl_usart2_cts>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fc00c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc00c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(18))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(19))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart4: serial@fc010000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc010000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <31 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(20))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(21))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart4>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 31>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fc014000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xfc014000 0x4000>;
+				interrupts = <49 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(28))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(29))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			spi1: spi@fc018000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfc018000 0x100>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(12))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(13))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi2: spi@fc01c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfc01c000 0x100>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(14))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(15))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			tcb1: timer@fc020000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfc020000 0x100>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			tcb2: timer@fc024000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfc024000 0x100>;
+				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			macb1: ethernet@fc028000 {
+				compatible = "atmel,sama5d4-gem";
+				reg = <0xfc028000 0x100>;
+				interrupts = <55 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_PERIPHERAL 55>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			trng@fc030000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xfc030000 0x100>;
+				interrupts = <53 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 53>;
+			};
+
+			adc0: adc@fc034000 {
+				compatible = "atmel,at91sam9x5-adc";
+				reg = <0xfc034000 0x100>;
+				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 44>,
+					 <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-channels-used = <0x01f>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-use-external-triggers;
+				atmel,adc-vref = <3000>;
+				atmel,adc-sample-hold-time = <11>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+				status = "disabled";
+			};
+
+			aes: crypto@fc044000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xfc044000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(41))>,
+				       <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(40))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "aes_clk";
+			};
+
+			tdes: crypto@fc04c000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xfc04c000 0x100>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(42))>,
+				       <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(43))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "tdes_clk";
+			};
+
+			sha: crypto@fc050000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xfc050000 0x100>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(44))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "sha_clk";
+			};
+
+			hsmc: smc@fc05c000 {
+				compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
+				reg = <0xfc05c000 0x1000>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH 6>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				pmecc: ecc-engine@ffffc070 {
+					compatible = "atmel,sama5d4-pmecc";
+					reg = <0xfc05c070 0x490>,
+					      <0xfc05c500 0x100>;
+				};
+			};
+
+			reset_controller: reset-controller@fc068600 {
+				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
+				reg = <0xfc068600 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shutdown_controller: poweroff@fc068610 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfc068610 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fc068630 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfc068630 0x10>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
+			};
+
+			watchdog: watchdog@fc068640 {
+				compatible = "atmel,sama5d4-wdt";
+				reg = <0xfc068640 0x10>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			clk32k: clock-controller@fc068650 {
+				compatible = "atmel,sama5d4-sckc";
+				reg = <0xfc068650 0x4>;
+				#clock-cells = <0>;
+				clocks = <&slow_xtal>;
+			};
+
+			rtc@fc0686b0 {
+				compatible = "atmel,sama5d4-rtc";
+				reg = <0xfc0686b0 0x30>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+			};
+
+			dbgu: serial@fc069000 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfc069000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+
+			pinctrl: pinctrl@fc06a000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
+				ranges = <0xfc068000 0xfc068000 0x100
+					  0xfc06a000 0xfc06a000 0x4000>;
+				/* WARNING: revisit as pin spec has changed */
+				atmel,mux-mask = <
+					/*   A          B          C  */
+					0xffffffff 0x3ffcfe7c 0x1c010101	/* pioA */
+					0x7fffffff 0xfffccc3a 0x3f00cc3a	/* pioB */
+					0xffffffff 0x3ff83fff 0xff00ffff	/* pioC */
+					0xb003ff00 0x8002a800 0x00000000	/* pioD */
+					0xffffffff 0x7fffffff 0x76fff1bf	/* pioE */
+					>;
+
+				pioA: gpio@fc06a000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc06a000 0x100>;
+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+				};
+
+				pioB: gpio@fc06b000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc06b000 0x100>;
+					interrupts = <24 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				};
+
+				pioC: gpio@fc06c000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc06c000 0x100>;
+					interrupts = <25 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
+				};
+
+				pioD: gpio@fc068000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc068000 0x100>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				};
+
+				pioE: gpio@fc06d000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc06d000 0x100>;
+					interrupts = <26 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
+				};
+
+				/* pinctrl pin settings */
+				adc0 {
+					pinctrl_adc0_adtrg: adc0_adtrg {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* conflicts with USBA_VBUS */
+					};
+					pinctrl_adc0_ad0: adc0_ad0 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad1: adc0_ad1 {
+						atmel,pins =
+							<AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad2: adc0_ad2 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad3: adc0_ad3 {
+						atmel,pins =
+							<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad4: adc0_ad4 {
+						atmel,pins =
+							<AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* conflicts with D14 and TDI */
+							 AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;		/* conflicts with D15 and TDO */
+					};
+				};
+
+				ebi {
+					pinctrl_ebi_addr: ebi-addr-0 {
+						atmel,pins =
+							<AT91_PIOE 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nand_addr: ebi-addr-1 {
+						atmel,pins =
+							<AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs0: ebi-cs0-0 {
+						atmel,pins =
+							<AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs1: ebi-cs1-0 {
+						atmel,pins =
+							<AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs2: ebi-cs2-0 {
+						atmel,pins =
+							<AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs3: ebi-cs3-0 {
+						atmel,pins =
+							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
+						atmel,pins =
+							<AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_data_8_15: ebi-data-msb-0 {
+						atmel,pins =
+							<AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nandrdy: ebi-nandrdy-0 {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nrd_nandoe: ebi-nrd-nandoe-0 {
+						atmel,pins =
+							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nwait: ebi-nwait-0 {
+						atmel,pins =
+							<AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nwe_nandwe: ebi-nwe-nandwe-0 {
+						atmel,pins =
+							<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nwr1_nbs1: ebi-nwr1-nbs1-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_i2c0_gpio: i2c0-gpio {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_C AT91_PINCTRL_NONE	/* TWD1, conflicts with UART0 RX and DIBP */
+							 AT91_PIOE 30 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* TWCK1, conflicts with UART0 TX and DIBN */
+					};
+
+					pinctrl_i2c1_gpio: i2c1-gpio {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2: i2c2-0 {
+						atmel,pins =
+							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* TWD2, conflicts with RD0 and PWML1 */
+							 AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* TWCK2, conflicts with RF0 */
+					};
+
+					pinctrl_i2c2_gpio: i2c2-gpio {
+						atmel,pins =
+							<AT91_PIOB 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOB 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				isi {
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
+						atmel,pins =
+							<AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D0 */
+							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D1 */
+							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D2 */
+							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D3 */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D4 */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D5 */
+							 AT91_PIOC 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D6 */
+							 AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D7 */
+							 AT91_PIOB  1 AT91_PERIPH_C AT91_PINCTRL_NONE	/* ISI_PCK, conflict with G0_RXCK */
+							 AT91_PIOB  3 AT91_PERIPH_C AT91_PINCTRL_NONE	/* ISI_VSYNC */
+							 AT91_PIOB  4 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_HSYNC */
+					};
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE	/* ISI_D8, conflicts with SPI0_MISO, PWMH2 */
+							 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_D9, conflicts with SPI0_MOSI, PWML2 */
+					};
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
+						atmel,pins =
+							<AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE	/* ISI_D10, conflicts with SPI0_SPCK, PWMH3 */
+							 AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_D11, conflicts with SPI0_NPCS0, PWML3 */
+					};
+				};
+
+				lcd {
+					pinctrl_lcd_base: lcd-base-0 {
+						atmel,pins =
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+					};
+					pinctrl_lcd_pwm: lcd-pwm-0 {
+						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+					};
+					pinctrl_lcd_rgb444: lcd-rgb-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD11 pin */
+					};
+					pinctrl_lcd_rgb565: lcd-rgb-1 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD15 pin */
+					};
+					pinctrl_lcd_rgb666: lcd-rgb-2 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+					pinctrl_lcd_rgb777: lcd-rgb-3 {
+						atmel,pins =
+							 /* LCDDAT0 conflicts with TMS */
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 /* LCDDAT8 conflicts with TCK */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 /* LCDDAT16 conflicts with NTRST */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+					pinctrl_lcd_rgb888: lcd-rgb-4 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+				};
+
+				macb0 {
+					pinctrl_macb0_rmii: macb0_rmii-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TX0 */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TX1 */
+							 AT91_PIOB  8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RX0 */
+							 AT91_PIOB  9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RX1 */
+							 AT91_PIOB  6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RXDV */
+							 AT91_PIOB  7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RXER */
+							 AT91_PIOB  2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TXEN */
+							 AT91_PIOB  0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TXCK */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_MDC */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_MDIO */
+							>;
+					};
+				};
+
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TX0 */
+							 AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TX1 */
+							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RX0 */
+							 AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RX1 */
+							 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RXDV */
+							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RXER */
+							 AT91_PIOA  4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TXEN */
+							 AT91_PIOA  2 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TXCK */
+							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_MDC */
+							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_MDIO */
+							>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* MCI0_CK, conflict with PCK1(ISI_MCK) */
+							 AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_CDA, conflict with NAND_D0 */
+							 AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA0, conflict with NAND_D1 */
+							>;
+					};
+					pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
+						atmel,pins =
+							<AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA1, conflict with NAND_D2 */
+							 AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA2, conflict with NAND_D3 */
+							 AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA3, conflict with NAND_D4 */
+							>;
+					};
+					pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA4, conflict with NAND_D5 */
+							 AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA5, conflict with NAND_D6 */
+							 AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA6, conflict with NAND_D7 */
+							 AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA7, conflict with NAND_OE */
+							>;
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOE 18 AT91_PERIPH_C AT91_PINCTRL_NONE		/* MCI1_CK */
+							 AT91_PIOE 19 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_CDA */
+							 AT91_PIOE 20 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA0 */
+							>;
+					};
+					pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
+						atmel,pins =
+							<AT91_PIOE 21 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA1 */
+							 AT91_PIOE 22 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA2 */
+							 AT91_PIOE 23 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA3 */
+							>;
+					};
+				};
+
+				nand0 {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC13 periph A Read Enable */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC14 periph A Write Enable */
+
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC17 ALE */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC18 CLE */
+
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC15 NCS3/Chip Enable */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC16 NANDRDY */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC5 Data bit 0 */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 Data bit 1 */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 Data bit 2 */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 Data bit 3 */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC9 Data bit 4 */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC10 Data bit 5 */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC11 periph A Data bit 6 */
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC12 periph A Data bit 7 */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI0_MISO */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI0_MOSI */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI0_SPCK */
+							>;
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx {
+						atmel,pins =
+							<AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TK0 */
+							 AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TF0 */
+							 AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* TD0 */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx {
+						atmel,pins =
+							<AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* RK0 */
+							 AT91_PIOB 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* RF0 */
+							 AT91_PIOB 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* RD0 */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx {
+						atmel,pins =
+							<AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TK1 */
+							 AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TF1 */
+							 AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* TD1 */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx {
+						atmel,pins =
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* RK1 */
+							 AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* RF1 */
+							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* RD1 */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI1_MISO */
+							 AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI1_MOSI */
+							 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI1_SPCK */
+							>;
+					};
+				};
+
+				spi2 {
+					pinctrl_spi2: spi2-0 {
+						atmel,pins =
+							<AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE	/* SPI2_MISO conflicts with RTS0 */
+							 AT91_PIOD 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* SPI2_MOSI conflicts with TXD0 */
+							 AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE	/* SPI2_SPCK conflicts with RTS1 */
+							>;
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* RXD */
+							 AT91_PIOE 30 AT91_PERIPH_B AT91_PINCTRL_NONE		/* TXD */
+							>;
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* RXD */
+							 AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE		/* TXD */
+							>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* RXD */
+							 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE		/* TXD */
+							>;
+					};
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins = <AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins = <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* RXD */
+							 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE		/* TXD */
+							>;
+					};
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins = <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins = <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP		/* RXD - conflicts with G0_CRS, ISI_HSYNC */
+							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE		/* TXD - conflicts with G0_COL, PCK2 */
+							>;
+					};
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with G0_RX3, PWMH1 */
+					};
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with G0_TXER, ISI_VSYNC */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* RXD */
+							 AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE		/* TXD */
+							>;
+					};
+				};
+
+				usart4 {
+					pinctrl_usart4: usart4-0 {
+						atmel,pins =
+							<AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* RXD */
+							 AT91_PIOE 27 AT91_PERIPH_B AT91_PINCTRL_NONE		/* TXD */
+							>;
+					};
+					pinctrl_usart4_rts: usart4_rts-0 {
+						atmel,pins = <AT91_PIOE 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with NWAIT, A19 */
+					};
+					pinctrl_usart4_cts: usart4_cts-0 {
+						atmel,pins = <AT91_PIOE 0 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with A0/NBS0, MCI0_CDB */
+					};
+				};
+			};
+
+			aic: interrupt-controller@fc06e000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,sama5d4-aic";
+				interrupt-controller;
+				reg = <0xfc06e000 0x200>;
+				atmel,external-irqs = <56>;
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/sama7g5-pinfunc.h b/src/arm/microchip/sama7g5-pinfunc.h
new file mode 100644
index 0000000..a67a156
--- /dev/null
+++ b/src/arm/microchip/sama7g5-pinfunc.h
@@ -0,0 +1,923 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+#define PINMUX_PIN(no, func, ioset) \
+(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20))
+
+#define PIN_PA0				0
+#define PIN_PA0__GPIO			PINMUX_PIN(PIN_PA0, 0, 0)
+#define PIN_PA0__SDMMC0_CK		PINMUX_PIN(PIN_PA0, 1, 1)
+#define PIN_PA0__FLEXCOM0_IO0		PINMUX_PIN(PIN_PA0, 2, 1)
+#define PIN_PA0__CANTX3			PINMUX_PIN(PIN_PA0, 3, 1)
+#define PIN_PA0__PWML0			PINMUX_PIN(PIN_PA0, 5, 2)
+#define PIN_PA1				1
+#define PIN_PA1__GPIO			PINMUX_PIN(PIN_PA1, 0, 0)
+#define PIN_PA1__SDMMC0_CMD		PINMUX_PIN(PIN_PA1, 1, 1)
+#define PIN_PA1__FLEXCOM0_IO1		PINMUX_PIN(PIN_PA1, 2, 1)
+#define PIN_PA1__CANRX3			PINMUX_PIN(PIN_PA1, 3, 1)
+#define PIN_PA1__D14			PINMUX_PIN(PIN_PA1, 4, 1)
+#define PIN_PA1__PWMH0			PINMUX_PIN(PIN_PA1, 5, 3)
+#define PIN_PA2				2
+#define PIN_PA2__GPIO			PINMUX_PIN(PIN_PA2, 0, 0)
+#define PIN_PA2__SDMMC0_RSTN		PINMUX_PIN(PIN_PA2, 1, 1)
+#define PIN_PA2__FLEXCOM0_IO2		PINMUX_PIN(PIN_PA2, 2, 1)
+#define PIN_PA2__PDMC1_CLK		PINMUX_PIN(PIN_PA2, 3, 1)
+#define PIN_PA2__D15			PINMUX_PIN(PIN_PA2, 4, 1)
+#define PIN_PA2__PWMH1			PINMUX_PIN(PIN_PA2, 5, 3)
+#define PIN_PA2__FLEXCOM1_IO0		PINMUX_PIN(PIN_PA2, 6, 3)
+#define PIN_PA3				3
+#define PIN_PA3__GPIO			PINMUX_PIN(PIN_PA3, 0, 0)
+#define PIN_PA3__SDMMC0_DAT0		PINMUX_PIN(PIN_PA3, 1, 1)
+#define PIN_PA3__FLEXCOM0_IO3		PINMUX_PIN(PIN_PA3, 2, 1)
+#define PIN_PA3__PDMC1_DS0		PINMUX_PIN(PIN_PA3, 3, 1)
+#define PIN_PA3__NWR1_NBS1		PINMUX_PIN(PIN_PA3, 4, 1)
+#define PIN_PA3__PWML3			PINMUX_PIN(PIN_PA3, 5, 3)
+#define PIN_PA3__FLEXCOM1_IO1		PINMUX_PIN(PIN_PA3, 6, 3)
+#define PIN_PA4				4
+#define PIN_PA4__GPIO			PINMUX_PIN(PIN_PA4, 0, 0)
+#define PIN_PA4__SDMMC0_DAT1		PINMUX_PIN(PIN_PA4, 1, 1)
+#define PIN_PA4__FLEXCOM0_IO4		PINMUX_PIN(PIN_PA4, 2, 1)
+#define PIN_PA4__PDMC1_DS1		PINMUX_PIN(PIN_PA4, 3, 1)
+#define PIN_PA4__NCS2			PINMUX_PIN(PIN_PA4, 4, 1)
+#define PIN_PA4__PWMH3			PINMUX_PIN(PIN_PA4, 5, 3)
+#define PIN_PA4__FLEXCOM2_IO0		PINMUX_PIN(PIN_PA4, 6, 3)
+#define PIN_PA5				5
+#define PIN_PA5__GPIO			PINMUX_PIN(PIN_PA5, 0, 0)
+#define PIN_PA5__SDMMC0_DAT2		PINMUX_PIN(PIN_PA5, 1, 1)
+#define PIN_PA5__FLEXCOM1_IO0		PINMUX_PIN(PIN_PA5, 2, 1)
+#define PIN_PA5__CANTX2			PINMUX_PIN(PIN_PA5, 3, 1)
+#define PIN_PA5__A23			PINMUX_PIN(PIN_PA5, 4, 1)
+#define PIN_PA5__PWMEXTRG0		PINMUX_PIN(PIN_PA5, 5, 3)
+#define PIN_PA5__FLEXCOM2_IO1		PINMUX_PIN(PIN_PA5, 6, 3)
+#define PIN_PA6				6
+#define PIN_PA6__GPIO			PINMUX_PIN(PIN_PA6, 0, 0)
+#define PIN_PA6__SDMMC0_DAT3		PINMUX_PIN(PIN_PA6, 1, 1)
+#define PIN_PA6__FLEXCOM1_IO1		PINMUX_PIN(PIN_PA6, 2, 1)
+#define PIN_PA6__CANRX2			PINMUX_PIN(PIN_PA6, 3, 1)
+#define PIN_PA6__A24			PINMUX_PIN(PIN_PA6, 4, 1)
+#define PIN_PA6__PWMEXTRG1		PINMUX_PIN(PIN_PA6, 5, 3)
+#define PIN_PA6__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA6, 6, 3)
+#define PIN_PA7				7
+#define PIN_PA7__GPIO			PINMUX_PIN(PIN_PA7, 0, 0)
+#define PIN_PA7__SDMMC0_DAT4		PINMUX_PIN(PIN_PA7, 1, 1)
+#define PIN_PA7__FLEXCOM2_IO0		PINMUX_PIN(PIN_PA7, 2, 1)
+#define PIN_PA7__CANTX1			PINMUX_PIN(PIN_PA7, 3, 1)
+#define PIN_PA7__NWAIT			PINMUX_PIN(PIN_PA7, 4, 1)
+#define PIN_PA7__PWMFI0			PINMUX_PIN(PIN_PA7, 5, 3)
+#define PIN_PA7__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA7, 6, 3)
+#define PIN_PA8				8
+#define PIN_PA8__GPIO			PINMUX_PIN(PIN_PA8, 0, 0)
+#define PIN_PA8__SDMMC0_DAT5		PINMUX_PIN(PIN_PA8, 1, 1)
+#define PIN_PA8__FLEXCOM2_IO1		PINMUX_PIN(PIN_PA8, 2, 1)
+#define PIN_PA8__CANRX1			PINMUX_PIN(PIN_PA8, 3, 1)
+#define PIN_PA8__NCS0			PINMUX_PIN(PIN_PA8, 4, 1)
+#define PIN_PA8__PWMIF1			PINMUX_PIN(PIN_PA8, 5, 3)
+#define PIN_PA8__FLEXCOM4_IO0		PINMUX_PIN(PIN_PA8, 6, 3)
+#define PIN_PA9				9
+#define PIN_PA9__GPIO			PINMUX_PIN(PIN_PA9, 0, 0)
+#define PIN_PA9__SDMMC0_DAT6		PINMUX_PIN(PIN_PA9, 1, 1)
+#define PIN_PA9__FLEXCOM2_IO2		PINMUX_PIN(PIN_PA9, 2, 1)
+#define PIN_PA9__CANTX0			PINMUX_PIN(PIN_PA9, 3, 1)
+#define PIN_PA9__SMCK			PINMUX_PIN(PIN_PA9, 4, 1)
+#define PIN_PA9__SPDIF_RX		PINMUX_PIN(PIN_PA9, 5, 1)
+#define PIN_PA9__FLEXCOM4_IO1		PINMUX_PIN(PIN_PA9, 6, 3)
+#define PIN_PA10			10
+#define PIN_PA10__GPIO			PINMUX_PIN(PIN_PA10, 0, 0)
+#define PIN_PA10__SDMMC0_DAT7		PINMUX_PIN(PIN_PA10, 1, 1)
+#define PIN_PA10__FLEXCOM2_IO3		PINMUX_PIN(PIN_PA10, 2, 1)
+#define PIN_PA10__CANRX0		PINMUX_PIN(PIN_PA10, 3, 1)
+#define PIN_PA10__NCS1			PINMUX_PIN(PIN_PA10, 4, 1)
+#define PIN_PA10__SPDIF_TX		PINMUX_PIN(PIN_PA10, 5, 1)
+#define PIN_PA10__FLEXCOM5_IO0		PINMUX_PIN(PIN_PA10, 6, 3)
+#define PIN_PA11			11
+#define PIN_PA11__GPIO			PINMUX_PIN(PIN_PA11, 0, 0)
+#define PIN_PA11__SDMMC0_DS		PINMUX_PIN(PIN_PA11, 1, 1)
+#define PIN_PA11__FLEXCOM2_IO4		PINMUX_PIN(PIN_PA11, 2, 1)
+#define PIN_PA11__A0_NBS0		PINMUX_PIN(PIN_PA11, 4, 1)
+#define PIN_PA11__TIOA0			PINMUX_PIN(PIN_PA11, 5, 1)
+#define PIN_PA11__FLEXCOM5_IO1		PINMUX_PIN(PIN_PA11, 6, 3)
+#define PIN_PA12			12
+#define PIN_PA12__GPIO			PINMUX_PIN(PIN_PA12, 0, 0)
+#define PIN_PA12__SDMMC0_WP		PINMUX_PIN(PIN_PA12, 1, 1)
+#define PIN_PA12__FLEXCOM1_IO3		PINMUX_PIN(PIN_PA12, 2, 1)
+#define PIN_PA12__FLEXCOM3_IO5		PINMUX_PIN(PIN_PA12, 4, 1)
+#define PIN_PA12__PWML2			PINMUX_PIN(PIN_PA12, 5, 3)
+#define PIN_PA12__FLEXCOM6_IO0		PINMUX_PIN(PIN_PA12, 6, 3)
+#define PIN_PA13			13
+#define PIN_PA13__GPIO			PINMUX_PIN(PIN_PA13, 0, 0)
+#define PIN_PA13__SDMMC0_1V8SEL		PINMUX_PIN(PIN_PA13, 1, 1)
+#define PIN_PA13__FLEXCOM1_IO2		PINMUX_PIN(PIN_PA13, 2, 1)
+#define PIN_PA13__FLEXCOM3_IO6		PINMUX_PIN(PIN_PA13, 4, 1)
+#define PIN_PA13__PWMH2			PINMUX_PIN(PIN_PA13, 5, 3)
+#define PIN_PA13__FLEXCOM6_IO1		PINMUX_PIN(PIN_PA13, 6, 3)
+#define PIN_PA14			14
+#define PIN_PA14__GPIO			PINMUX_PIN(PIN_PA14, 0, 0)
+#define PIN_PA14__SDMMC0_CD		PINMUX_PIN(PIN_PA14, 1, 1)
+#define PIN_PA14__FLEXCOM1_IO4		PINMUX_PIN(PIN_PA14, 2, 1)
+#define PIN_PA14__A25			PINMUX_PIN(PIN_PA14, 4, 1)
+#define PIN_PA14__PWML1			PINMUX_PIN(PIN_PA14, 5, 3)
+#define PIN_PA15			15
+#define PIN_PA15__GPIO			PINMUX_PIN(PIN_PA15, 0, 0)
+#define PIN_PA15__G0_TXEN		PINMUX_PIN(PIN_PA15, 1, 1)
+#define PIN_PA15__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA15, 2, 1)
+#define PIN_PA15__ISC_MCK		PINMUX_PIN(PIN_PA15, 3, 1)
+#define PIN_PA15__A1			PINMUX_PIN(PIN_PA15, 4, 1)
+#define PIN_PA15__TIOB0			PINMUX_PIN(PIN_PA15, 5, 1)
+#define PIN_PA16			16
+#define PIN_PA16__GPIO			PINMUX_PIN(PIN_PA16, 0, 0)
+#define PIN_PA16__G0_TX0		PINMUX_PIN(PIN_PA16, 1, 1)
+#define PIN_PA16__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA16, 2, 1)
+#define PIN_PA16__ISC_D0		PINMUX_PIN(PIN_PA16, 3, 1)
+#define PIN_PA16__A2			PINMUX_PIN(PIN_PA16, 4, 1)
+#define PIN_PA16__TCLK0			PINMUX_PIN(PIN_PA16, 5, 1)
+#define PIN_PA17			17
+#define PIN_PA17__GPIO			PINMUX_PIN(PIN_PA17, 0, 0)
+#define PIN_PA17__G0_TX1		PINMUX_PIN(PIN_PA17, 1, 1)
+#define PIN_PA17__FLEXCOM3_IO2		PINMUX_PIN(PIN_PA17, 2, 1)
+#define PIN_PA17__ISC_D1		PINMUX_PIN(PIN_PA17, 3, 1)
+#define PIN_PA17__A3			PINMUX_PIN(PIN_PA17, 4, 1)
+#define PIN_PA17__TIOA1			PINMUX_PIN(PIN_PA17, 5, 1)
+#define PIN_PA18			18
+#define PIN_PA18__GPIO			PINMUX_PIN(PIN_PA18, 0, 0)
+#define PIN_PA18__G0_RXDV		PINMUX_PIN(PIN_PA18, 1, 1)
+#define PIN_PA18__FLEXCOM3_IO3		PINMUX_PIN(PIN_PA18, 2, 1)
+#define PIN_PA18__ISC_D2		PINMUX_PIN(PIN_PA18, 3, 1)
+#define PIN_PA18__A4			PINMUX_PIN(PIN_PA18, 4, 1)
+#define PIN_PA18__TIOB1			PINMUX_PIN(PIN_PA18, 5, 1)
+#define PIN_PA19			19
+#define PIN_PA19__GPIO			PINMUX_PIN(PIN_PA19, 0, 0)
+#define PIN_PA19__G0_RX0		PINMUX_PIN(PIN_PA19, 1, 1)
+#define PIN_PA19__FLEXCOM3_IO4		PINMUX_PIN(PIN_PA19, 2, 1)
+#define PIN_PA19__ISC_D3		PINMUX_PIN(PIN_PA19, 3, 1)
+#define PIN_PA19__A5			PINMUX_PIN(PIN_PA19, 4, 1)
+#define PIN_PA19__TCLK1			PINMUX_PIN(PIN_PA19, 5, 1)
+#define PIN_PA20			20
+#define PIN_PA20__GPIO			PINMUX_PIN(PIN_PA20, 0, 0)
+#define PIN_PA20__G0_RX1		PINMUX_PIN(PIN_PA20, 1, 1)
+#define PIN_PA20__FLEXCOM4_IO0		PINMUX_PIN(PIN_PA20, 2, 1)
+#define PIN_PA20__ISC_D4		PINMUX_PIN(PIN_PA20, 3, 1)
+#define PIN_PA20__A6			PINMUX_PIN(PIN_PA20, 4, 1)
+#define PIN_PA20__TIOA2			PINMUX_PIN(PIN_PA20, 5, 1)
+#define PIN_PA21			21
+#define PIN_PA21__GPIO			PINMUX_PIN(PIN_PA21, 0, 0)
+#define PIN_PA21__G0_RXER		PINMUX_PIN(PIN_PA21, 1, 1)
+#define PIN_PA21__FLEXCOM4_IO1		PINMUX_PIN(PIN_PA21, 2, 1)
+#define PIN_PA21__ISC_D5		PINMUX_PIN(PIN_PA21, 3, 1)
+#define PIN_PA21__A7			PINMUX_PIN(PIN_PA21, 4, 1)
+#define PIN_PA21__TIOB2			PINMUX_PIN(PIN_PA21, 5, 1)
+#define PIN_PA22			22
+#define PIN_PA22__GPIO			PINMUX_PIN(PIN_PA22, 0, 0)
+#define PIN_PA22__G0_MDC		PINMUX_PIN(PIN_PA22, 1, 1)
+#define PIN_PA22__FLEXCOM4_IO2		PINMUX_PIN(PIN_PA22, 2, 1)
+#define PIN_PA22__ISC_D6		PINMUX_PIN(PIN_PA22, 3, 1)
+#define PIN_PA22__A8			PINMUX_PIN(PIN_PA22, 4, 1)
+#define PIN_PA22__TCLK2			PINMUX_PIN(PIN_PA22, 5, 1)
+#define PIN_PA23			23
+#define PIN_PA23__GPIO			PINMUX_PIN(PIN_PA23, 0, 0)
+#define PIN_PA23__G0_MDIO		PINMUX_PIN(PIN_PA23, 1, 1)
+#define PIN_PA23__FLEXCOM4_IO3		PINMUX_PIN(PIN_PA23, 2, 1)
+#define PIN_PA23__ISC_D7		PINMUX_PIN(PIN_PA23, 3, 1)
+#define PIN_PA23__A9			PINMUX_PIN(PIN_PA23, 4, 1)
+#define PIN_PA24			24
+#define PIN_PA24__GPIO			PINMUX_PIN(PIN_PA24, 0, 0)
+#define PIN_PA24__G0_TXCK		PINMUX_PIN(PIN_PA24, 1, 1)
+#define PIN_PA24__FLEXCOM4_IO4		PINMUX_PIN(PIN_PA24, 2, 1)
+#define PIN_PA24__ISC_HSYNC		PINMUX_PIN(PIN_PA24, 3, 1)
+#define PIN_PA24__A10			PINMUX_PIN(PIN_PA24, 4, 1)
+#define PIN_PA24__FLEXCOM0_IO5		PINMUX_PIN(PIN_PA24, 5, 1)
+#define PIN_PA25			25
+#define PIN_PA25__GPIO			PINMUX_PIN(PIN_PA25, 0, 0)
+#define PIN_PA25__G0_125CK		PINMUX_PIN(PIN_PA25, 1, 1)
+#define PIN_PA25__FLEXCOM5_IO4		PINMUX_PIN(PIN_PA25, 2, 1)
+#define PIN_PA25__ISC_VSYNC		PINMUX_PIN(PIN_PA25, 3, 1)
+#define PIN_PA25__A11			PINMUX_PIN(PIN_PA25, 4, 1)
+#define PIN_PA25__FLEXCOM0_IO6		PINMUX_PIN(PIN_PA25, 5, 1)
+#define PIN_PA25__FLEXCOM7_IO0		PINMUX_PIN(PIN_PA25, 6, 3)
+#define PIN_PA26			26
+#define PIN_PA26__GPIO			PINMUX_PIN(PIN_PA26, 0, 0)
+#define PIN_PA26__G0_TX2		PINMUX_PIN(PIN_PA26, 1, 1)
+#define PIN_PA26__FLEXCOM5_IO2		PINMUX_PIN(PIN_PA26, 2, 1)
+#define PIN_PA26__ISC_FIELD		PINMUX_PIN(PIN_PA26, 3, 1)
+#define PIN_PA26__A12			PINMUX_PIN(PIN_PA26, 4, 1)
+#define PIN_PA26__TF0			PINMUX_PIN(PIN_PA26, 5, 1)
+#define PIN_PA26__FLEXCOM7_IO1		PINMUX_PIN(PIN_PA26, 6, 3)
+#define PIN_PA27			27
+#define PIN_PA27__GPIO			PINMUX_PIN(PIN_PA27, 0, 0)
+#define PIN_PA27__G0_TX3		PINMUX_PIN(PIN_PA27, 1, 1)
+#define PIN_PA27__FLEXCOM5_IO3		PINMUX_PIN(PIN_PA27, 2, 1)
+#define PIN_PA27__ISC_PCK		PINMUX_PIN(PIN_PA27, 3, 1)
+#define PIN_PA27__A13			PINMUX_PIN(PIN_PA27, 4, 1)
+#define PIN_PA27__TK0			PINMUX_PIN(PIN_PA27, 5, 1)
+#define PIN_PA27__FLEXCOM8_IO0		PINMUX_PIN(PIN_PA27, 6, 3)
+#define PIN_PA28			28
+#define PIN_PA28__GPIO			PINMUX_PIN(PIN_PA28, 0, 0)
+#define PIN_PA28__G0_RX2		PINMUX_PIN(PIN_PA28, 1, 1)
+#define PIN_PA28__FLEXCOM5_IO0		PINMUX_PIN(PIN_PA28, 2, 1)
+#define PIN_PA28__ISC_D8		PINMUX_PIN(PIN_PA28, 3, 1)
+#define PIN_PA28__A14			PINMUX_PIN(PIN_PA28, 4, 1)
+#define PIN_PA28__RD0			PINMUX_PIN(PIN_PA28, 5, 1)
+#define PIN_PA28__FLEXCOM8_IO1		PINMUX_PIN(PIN_PA28, 6, 3)
+#define PIN_PA29			29
+#define PIN_PA29__GPIO			PINMUX_PIN(PIN_PA29, 0, 0)
+#define PIN_PA29__G0_RX3		PINMUX_PIN(PIN_PA29, 1, 1)
+#define PIN_PA29__FLEXCOM5_IO1		PINMUX_PIN(PIN_PA29, 2, 1)
+#define PIN_PA29__ISC_D9		PINMUX_PIN(PIN_PA29, 3, 1)
+#define PIN_PA29__A15			PINMUX_PIN(PIN_PA29, 4, 1)
+#define PIN_PA29__RF0			PINMUX_PIN(PIN_PA29, 5, 1)
+#define PIN_PA29__FLEXCOM9_IO0		PINMUX_PIN(PIN_PA29, 6, 3)
+#define PIN_PA30			30
+#define PIN_PA30__GPIO			PINMUX_PIN(PIN_PA30, 0, 0)
+#define PIN_PA30__G0_RXCK		PINMUX_PIN(PIN_PA30, 1, 1)
+#define PIN_PA30__FLEXCOM6_IO4		PINMUX_PIN(PIN_PA30, 2, 1)
+#define PIN_PA30__ISC_D10		PINMUX_PIN(PIN_PA30, 3, 1)
+#define PIN_PA30__A16			PINMUX_PIN(PIN_PA30, 4, 1)
+#define PIN_PA30__RK0			PINMUX_PIN(PIN_PA30, 5, 1)
+#define PIN_PA30__FLEXCOM9_IO1		PINMUX_PIN(PIN_PA30, 6, 3)
+#define PIN_PA31			31
+#define PIN_PA31__GPIO			PINMUX_PIN(PIN_PA31, 0, 0)
+#define PIN_PA31__G0_TXER		PINMUX_PIN(PIN_PA31, 1, 1)
+#define PIN_PA31__FLEXCOM6_IO2		PINMUX_PIN(PIN_PA31, 2, 1)
+#define PIN_PA31__ISC_D11		PINMUX_PIN(PIN_PA31, 3, 1)
+#define PIN_PA31__A17			PINMUX_PIN(PIN_PA31, 4, 1)
+#define PIN_PA31__TD0			PINMUX_PIN(PIN_PA31, 5, 1)
+#define PIN_PA31__FLEXCOM10_IO0		PINMUX_PIN(PIN_PA31, 6, 3)
+#define PIN_PB0				32
+#define PIN_PB0__GPIO			PINMUX_PIN(PIN_PB0, 0, 0)
+#define PIN_PB0__G0_COL			PINMUX_PIN(PIN_PB0, 1, 1)
+#define PIN_PB0__FLEXCOM6_IO3		PINMUX_PIN(PIN_PB0, 2, 2)
+#define PIN_PB0__EXT_IRQ0		PINMUX_PIN(PIN_PB0, 3, 1)
+#define PIN_PB0__A18			PINMUX_PIN(PIN_PB0, 4, 1)
+#define PIN_PB0__SPDIF_RX		PINMUX_PIN(PIN_PB0, 5, 2)
+#define PIN_PB0__FLEXCOM10_IO1		PINMUX_PIN(PIN_PB0, 6, 3)
+#define PIN_PB1				33
+#define PIN_PB1__GPIO			PINMUX_PIN(PIN_PB1, 0, 0)
+#define PIN_PB1__G0_CRS			PINMUX_PIN(PIN_PB1, 1, 1)
+#define PIN_PB1__FLEXCOM6_IO1		PINMUX_PIN(PIN_PB1, 2, 2)
+#define PIN_PB1__EXT_IRQ1		PINMUX_PIN(PIN_PB1, 3, 1)
+#define PIN_PB1__A19			PINMUX_PIN(PIN_PB1, 4, 1)
+#define PIN_PB1__SPDIF_TX		PINMUX_PIN(PIN_PB1, 5, 2)
+#define PIN_PB1__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB1, 6, 3)
+#define PIN_PB2				34
+#define PIN_PB2__GPIO			PINMUX_PIN(PIN_PB2, 0, 0)
+#define PIN_PB2__G0_TSUCOMP		PINMUX_PIN(PIN_PB2, 1, 1)
+#define PIN_PB2__FLEXCOM6_IO0		PINMUX_PIN(PIN_PB2, 2, 1)
+#define PIN_PB2__ADTRG			PINMUX_PIN(PIN_PB2, 3, 1)
+#define PIN_PB2__A20			PINMUX_PIN(PIN_PB2, 4, 1)
+#define PIN_PB2__FLEXCOM11_IO1		PINMUX_PIN(PIN_PB2, 6, 3)
+#define PIN_PB3				35
+#define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
+#define PIN_PB3__RF1			PINMUX_PIN(PIN_PB3, 1, 1)
+#define PIN_PB3__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB3, 2, 1)
+#define PIN_PB3__PCK2			PINMUX_PIN(PIN_PB3, 3, 2)
+#define PIN_PB3__D8			PINMUX_PIN(PIN_PB3, 4, 1)
+#define PIN_PB4				36
+#define PIN_PB4__GPIO			PINMUX_PIN(PIN_PB4, 0, 0)
+#define PIN_PB4__TF1			PINMUX_PIN(PIN_PB4, 1, 1)
+#define PIN_PB4__FLEXCOM11_IO1		PINMUX_PIN(PIN_PB4, 2, 1)
+#define PIN_PB4__PCK3			PINMUX_PIN(PIN_PB4, 3, 2)
+#define PIN_PB4__D9			PINMUX_PIN(PIN_PB4, 4, 1)
+#define PIN_PB5				37
+#define PIN_PB5__GPIO			PINMUX_PIN(PIN_PB5, 0, 0)
+#define PIN_PB5__TK1			PINMUX_PIN(PIN_PB5, 1, 1)
+#define PIN_PB5__FLEXCOM11_IO2		PINMUX_PIN(PIN_PB5, 2, 1)
+#define PIN_PB5__PCK4			PINMUX_PIN(PIN_PB5, 3, 2)
+#define PIN_PB5__D10			PINMUX_PIN(PIN_PB5, 4, 1)
+#define PIN_PB6				38
+#define PIN_PB6__GPIO			PINMUX_PIN(PIN_PB6, 0, 0)
+#define PIN_PB6__RK1			PINMUX_PIN(PIN_PB6, 1, 1)
+#define PIN_PB6__FLEXCOM11_IO3		PINMUX_PIN(PIN_PB6, 2, 1)
+#define PIN_PB6__PCK5			PINMUX_PIN(PIN_PB6, 3, 2)
+#define PIN_PB6__D11			PINMUX_PIN(PIN_PB6, 4, 1)
+#define PIN_PB7				39
+#define PIN_PB7__GPIO			PINMUX_PIN(PIN_PB7, 0, 0)
+#define PIN_PB7__TD1			PINMUX_PIN(PIN_PB7, 1, 1)
+#define PIN_PB7__FLEXCOM11_IO4		PINMUX_PIN(PIN_PB7, 2, 1)
+#define PIN_PB7__FLEXCOM3_IO5		PINMUX_PIN(PIN_PB7, 3, 2)
+#define PIN_PB7__D12			PINMUX_PIN(PIN_PB7, 4, 1)
+#define PIN_PB8				40
+#define PIN_PB8__GPIO			PINMUX_PIN(PIN_PB8, 0, 0)
+#define PIN_PB8__RD1			PINMUX_PIN(PIN_PB8, 1, 1)
+#define PIN_PB8__FLEXCOM8_IO0		PINMUX_PIN(PIN_PB8, 2, 1)
+#define PIN_PB8__FLEXCOM3_IO6		PINMUX_PIN(PIN_PB8, 3, 2)
+#define PIN_PB8__D13			PINMUX_PIN(PIN_PB8, 4, 1)
+#define PIN_PB9				41
+#define PIN_PB9__GPIO			PINMUX_PIN(PIN_PB9, 0, 0)
+#define PIN_PB9__QSPI0_IO3		PINMUX_PIN(PIN_PB9, 1, 1)
+#define PIN_PB9__FLEXCOM8_IO1		PINMUX_PIN(PIN_PB9, 2, 1)
+#define PIN_PB9__PDMC0_CLK		PINMUX_PIN(PIN_PB9, 3, 1)
+#define PIN_PB9__NCS3_NANDCS		PINMUX_PIN(PIN_PB9, 4, 1)
+#define PIN_PB9__PWML0			PINMUX_PIN(PIN_PB9, 5, 2)
+#define PIN_PB10			42
+#define PIN_PB10__GPIO			PINMUX_PIN(PIN_PB10, 0, 0)
+#define PIN_PB10__QSPI0_IO2		PINMUX_PIN(PIN_PB10, 1, 1)
+#define PIN_PB10__FLEXCOM8_IO2		PINMUX_PIN(PIN_PB10, 2, 1)
+#define PIN_PB10__PDMC0_DS0		PINMUX_PIN(PIN_PB10, 3, 1)
+#define PIN_PB10__NWE_NWR0_NANDWE	PINMUX_PIN(PIN_PB10, 4, 1)
+#define PIN_PB10__PWMH0			PINMUX_PIN(PIN_PB10, 5, 2)
+#define PIN_PB11			43
+#define PIN_PB11__GPIO			PINMUX_PIN(PIN_PB11, 0, 0)
+#define PIN_PB11__QSPI0_IO1		PINMUX_PIN(PIN_PB11, 1, 1)
+#define PIN_PB11__FLEXCOM8_IO3		PINMUX_PIN(PIN_PB11, 2, 1)
+#define PIN_PB11__PDMC0_DS1		PINMUX_PIN(PIN_PB11, 3, 1)
+#define PIN_PB11__NRD_NANDOE		PINMUX_PIN(PIN_PB11, 4, 1)
+#define PIN_PB11__PWML1			PINMUX_PIN(PIN_PB11, 5, 2)
+#define PIN_PB12			44
+#define PIN_PB12__GPIO			PINMUX_PIN(PIN_PB12, 0, 0)
+#define PIN_PB12__QSPI0_IO0		PINMUX_PIN(PIN_PB12, 1, 1)
+#define PIN_PB12__FLEXCOM8_IO4		PINMUX_PIN(PIN_PB12, 2, 1)
+#define PIN_PB12__FLEXCOM6_IO5		PINMUX_PIN(PIN_PB12, 3, 1)
+#define PIN_PB12__A21_NANDALE		PINMUX_PIN(PIN_PB12, 4, 1)
+#define PIN_PB12__PWMH1			PINMUX_PIN(PIN_PB12, 5, 2)
+#define PIN_PB13			45
+#define PIN_PB13__GPIO			PINMUX_PIN(PIN_PB13, 0, 0)
+#define PIN_PB13__QSPI0_CS		PINMUX_PIN(PIN_PB13, 1, 1)
+#define PIN_PB13__FLEXCOM9_IO0		PINMUX_PIN(PIN_PB13, 2, 1)
+#define PIN_PB13__FLEXCOM6_IO6		PINMUX_PIN(PIN_PB13, 3, 1)
+#define PIN_PB13__A22_NANDCLE		PINMUX_PIN(PIN_PB13, 4, 1)
+#define PIN_PB13__PWML2			PINMUX_PIN(PIN_PB13, 5, 2)
+#define PIN_PB14			46
+#define PIN_PB14__GPIO			PINMUX_PIN(PIN_PB14, 0, 0)
+#define PIN_PB14__QSPI0_SCK		PINMUX_PIN(PIN_PB14, 1, 1)
+#define PIN_PB14__FLEXCOM9_IO1		PINMUX_PIN(PIN_PB14, 2, 1)
+#define PIN_PB14__D0			PINMUX_PIN(PIN_PB14, 4, 1)
+#define PIN_PB14__PWMH2			PINMUX_PIN(PIN_PB14, 5, 2)
+#define PIN_PB15			47
+#define PIN_PB15__GPIO			PINMUX_PIN(PIN_PB15, 0, 0)
+#define PIN_PB15__QSPI0_SCKN		PINMUX_PIN(PIN_PB15, 1, 1)
+#define PIN_PB15__FLEXCOM9_IO2		PINMUX_PIN(PIN_PB15, 2, 1)
+#define PIN_PB15__D1			PINMUX_PIN(PIN_PB15, 4, 1)
+#define PIN_PB15__PWML3			PINMUX_PIN(PIN_PB15, 5, 2)
+#define PIN_PB16			48
+#define PIN_PB16__GPIO			PINMUX_PIN(PIN_PB16, 0, 0)
+#define PIN_PB16__QSPI0_IO4		PINMUX_PIN(PIN_PB16, 1, 1)
+#define PIN_PB16__FLEXCOM9_IO3		PINMUX_PIN(PIN_PB16, 2, 1)
+#define PIN_PB16__PCK0			PINMUX_PIN(PIN_PB16, 3, 1)
+#define PIN_PB16__D2			PINMUX_PIN(PIN_PB16, 4, 1)
+#define PIN_PB16__PWMH3			PINMUX_PIN(PIN_PB16, 5, 2)
+#define PIN_PB16__EXT_IRQ0		PINMUX_PIN(PIN_PB16, 6, 2)
+#define PIN_PB17			49
+#define PIN_PB17__GPIO			PINMUX_PIN(PIN_PB17, 0, 0)
+#define PIN_PB17__QSPI0_IO5		PINMUX_PIN(PIN_PB17, 1, 1)
+#define PIN_PB17__FLEXCOM9_IO4		PINMUX_PIN(PIN_PB17, 2, 1)
+#define PIN_PB17__PCK1			PINMUX_PIN(PIN_PB17, 3, 1)
+#define PIN_PB17__D3			PINMUX_PIN(PIN_PB17, 4, 1)
+#define PIN_PB17__PWMEXTRG0		PINMUX_PIN(PIN_PB17, 5, 2)
+#define PIN_PB17__EXT_IRQ1		PINMUX_PIN(PIN_PB17, 6, 2)
+#define PIN_PB18			50
+#define PIN_PB18__GPIO			PINMUX_PIN(PIN_PB18, 0, 0)
+#define PIN_PB18__QSPI0_IO6		PINMUX_PIN(PIN_PB18, 1, 1)
+#define PIN_PB18__FLEXCOM10_IO0		PINMUX_PIN(PIN_PB18, 2, 1)
+#define PIN_PB18__PCK2			PINMUX_PIN(PIN_PB18, 3, 1)
+#define PIN_PB18__D4			PINMUX_PIN(PIN_PB18, 4, 1)
+#define PIN_PB18__PWMEXTRG1		PINMUX_PIN(PIN_PB18, 5, 2)
+#define PIN_PB19			51
+#define PIN_PB19__GPIO			PINMUX_PIN(PIN_PB19, 0, 0)
+#define PIN_PB19__QSPI0_IO7		PINMUX_PIN(PIN_PB19, 1, 1)
+#define PIN_PB19__FLEXCOM10_IO1		PINMUX_PIN(PIN_PB19, 2, 1)
+#define PIN_PB19__PCK3			PINMUX_PIN(PIN_PB19, 3, 1)
+#define PIN_PB19__D5			PINMUX_PIN(PIN_PB19, 4, 1)
+#define PIN_PB19__PWMFI0		PINMUX_PIN(PIN_PB19, 5, 2)
+#define PIN_PB20			52
+#define PIN_PB20__GPIO			PINMUX_PIN(PIN_PB20, 0, 0)
+#define PIN_PB20__QSPI0_DQS		PINMUX_PIN(PIN_PB20, 1, 1)
+#define PIN_PB20__FLEXCOM10_IO2		PINMUX_PIN(PIN_PB20, 2, 1)
+#define PIN_PB20__D6			PINMUX_PIN(PIN_PB20, 4, 1)
+#define PIN_PB20__PWMFI1		PINMUX_PIN(PIN_PB20, 5, 2)
+#define PIN_PB21			53
+#define PIN_PB21__GPIO			PINMUX_PIN(PIN_PB21, 0, 0)
+#define PIN_PB21__QSPI0_INT		PINMUX_PIN(PIN_PB21, 1, 1)
+#define PIN_PB21__FLEXCOM10_IO3		PINMUX_PIN(PIN_PB21, 2, 1)
+#define PIN_PB21__FLEXCOM9_IO5		PINMUX_PIN(PIN_PB21, 3, 1)
+#define PIN_PB21__D7			PINMUX_PIN(PIN_PB21, 4, 1)
+#define PIN_PB22			54
+#define PIN_PB22__GPIO			PINMUX_PIN(PIN_PB22, 0, 0)
+#define PIN_PB22__QSPI1_IO3		PINMUX_PIN(PIN_PB22, 1, 1)
+#define PIN_PB22__FLEXCOM10_IO4		PINMUX_PIN(PIN_PB22, 2, 1)
+#define PIN_PB22__FLEXCOM9_IO6		PINMUX_PIN(PIN_PB22, 3, 1)
+#define PIN_PB22__NANDRDY		PINMUX_PIN(PIN_PB22, 4, 1)
+#define PIN_PB23			55
+#define PIN_PB23__GPIO			PINMUX_PIN(PIN_PB23, 0, 0)
+#define PIN_PB23__QSPI1_IO2		PINMUX_PIN(PIN_PB23, 1, 1)
+#define PIN_PB23__FLEXCOM7_IO0		PINMUX_PIN(PIN_PB23, 2, 1)
+#define PIN_PB23__I2SMCC0_CK		PINMUX_PIN(PIN_PB23, 3, 1)
+#define PIN_PB23__PCK4			PINMUX_PIN(PIN_PB23, 6, 1)
+#define PIN_PB24			56
+#define PIN_PB24__GPIO			PINMUX_PIN(PIN_PB24, 0, 0)
+#define PIN_PB24__QSPI1_IO1		PINMUX_PIN(PIN_PB24, 1, 1)
+#define PIN_PB24__FLEXCOM7_IO1		PINMUX_PIN(PIN_PB24, 2, 1)
+#define PIN_PB24__I2SMCC0_WS		PINMUX_PIN(PIN_PB24, 3, 1)
+#define PIN_PB24__PCK5			PINMUX_PIN(PIN_PB24, 6, 1)
+#define PIN_PB25			57
+#define PIN_PB25__GPIO			PINMUX_PIN(PIN_PB25, 0, 0)
+#define PIN_PB25__QSPI1_IO0		PINMUX_PIN(PIN_PB25, 1, 1)
+#define PIN_PB25__FLEXCOM7_IO2		PINMUX_PIN(PIN_PB25, 2, 1)
+#define PIN_PB25__I2SMCC0_DOUT1		PINMUX_PIN(PIN_PB25, 3, 1)
+#define PIN_PB25__PCK6			PINMUX_PIN(PIN_PB25, 6, 1)
+#define PIN_PB26			58
+#define PIN_PB26__GPIO			PINMUX_PIN(PIN_PB26, 0, 0)
+#define PIN_PB26__QSPI1_CS		PINMUX_PIN(PIN_PB26, 1, 1)
+#define PIN_PB26__FLEXCOM7_IO3		PINMUX_PIN(PIN_PB26, 2, 1)
+#define PIN_PB26__I2SMCC0_DOUT0		PINMUX_PIN(PIN_PB26, 3, 1)
+#define PIN_PB26__PWMEXTRG0		PINMUX_PIN(PIN_PB26, 5, 1)
+#define PIN_PB26__PCK7			PINMUX_PIN(PIN_PB26, 6, 1)
+#define PIN_PB27			59
+#define PIN_PB27__GPIO			PINMUX_PIN(PIN_PB27, 0, 0)
+#define PIN_PB27__QSPI1_SCK		PINMUX_PIN(PIN_PB27, 1, 1)
+#define PIN_PB27__FLEXCOM7_IO4		PINMUX_PIN(PIN_PB27, 2, 1)
+#define PIN_PB27__I2SMCC0_MCK		PINMUX_PIN(PIN_PB27, 3, 1)
+#define PIN_PB27__PWMEXTRG1		PINMUX_PIN(PIN_PB27, 5, 1)
+#define PIN_PB28			60
+#define PIN_PB28__GPIO			PINMUX_PIN(PIN_PB28, 0, 0)
+#define PIN_PB28__SDMMC1_RSTN		PINMUX_PIN(PIN_PB28, 1, 1)
+#define PIN_PB28__ADTRG			PINMUX_PIN(PIN_PB28, 2, 2)
+#define PIN_PB28__PWMFI0		PINMUX_PIN(PIN_PB28, 5, 1)
+#define PIN_PB28__FLEXCOM7_IO0		PINMUX_PIN(PIN_PB28, 6, 4)
+#define PIN_PB29			61
+#define PIN_PB29__GPIO			PINMUX_PIN(PIN_PB29, 0, 0)
+#define PIN_PB29__SDMMC1_CMD		PINMUX_PIN(PIN_PB29, 1, 1)
+#define PIN_PB29__FLEXCOM3_IO2		PINMUX_PIN(PIN_PB29, 2, 2)
+#define PIN_PB29__FLEXCOM0_IO5		PINMUX_PIN(PIN_PB29, 3, 2)
+#define PIN_PB29__TIOA3			PINMUX_PIN(PIN_PB29, 4, 2)
+#define PIN_PB29__PWMFI1		PINMUX_PIN(PIN_PB29, 5, 1)
+#define PIN_PB29__FLEXCOM7_IO1		PINMUX_PIN(PIN_PB29, 6, 4)
+#define PIN_PB30			62
+#define PIN_PB30__GPIO			PINMUX_PIN(PIN_PB30, 0, 0)
+#define PIN_PB30__SDMMC1_CK		PINMUX_PIN(PIN_PB30, 1, 1)
+#define PIN_PB30__FLEXCOM3_IO3		PINMUX_PIN(PIN_PB30, 2, 2)
+#define PIN_PB30__FLEXCOM0_IO6		PINMUX_PIN(PIN_PB30, 3, 2)
+#define PIN_PB30__TIOB3			PINMUX_PIN(PIN_PB30, 4, 1)
+#define PIN_PB30__PWMH0			PINMUX_PIN(PIN_PB30, 5, 1)
+#define PIN_PB30__FLEXCOM8_IO0		PINMUX_PIN(PIN_PB30, 6, 4)
+#define PIN_PB31			63
+#define PIN_PB31__GPIO			PINMUX_PIN(PIN_PB31, 0, 0)
+#define PIN_PB31__SDMMC1_DAT0		PINMUX_PIN(PIN_PB31, 1, 1)
+#define PIN_PB31__FLEXCOM3_IO4		PINMUX_PIN(PIN_PB31, 2, 2)
+#define PIN_PB31__FLEXCOM9_IO5		PINMUX_PIN(PIN_PB31, 3, 2)
+#define PIN_PB31__TCLK3			PINMUX_PIN(PIN_PB31, 4, 1)
+#define PIN_PB31__PWML0			PINMUX_PIN(PIN_PB31, 5, 1)
+#define PIN_PB31__FLEXCOM8_IO1		PINMUX_PIN(PIN_PB31, 6, 4)
+#define PIN_PC0				64
+#define PIN_PC0__GPIO			PINMUX_PIN(PIN_PC0, 0, 0)
+#define PIN_PC0__SDMMC1_DAT1		PINMUX_PIN(PIN_PC0, 1, 1)
+#define PIN_PC0__FLEXCOM3_IO0		PINMUX_PIN(PIN_PC0, 2, 2)
+#define PIN_PC0__TIOA4			PINMUX_PIN(PIN_PC0, 4, 1)
+#define PIN_PC0__PWML1			PINMUX_PIN(PIN_PC0, 5, 1)
+#define PIN_PC0__FLEXCOM9_IO0		PINMUX_PIN(PIN_PC0, 6, 4)
+#define PIN_PC1				65
+#define PIN_PC1__GPIO			PINMUX_PIN(PIN_PC1, 0, 0)
+#define PIN_PC1__SDMMC1_DAT2		PINMUX_PIN(PIN_PC1, 1, 1)
+#define PIN_PC1__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC1, 2, 2)
+#define PIN_PC1__TIOB4			PINMUX_PIN(PIN_PC1, 4, 1)
+#define PIN_PC1__PWMH1			PINMUX_PIN(PIN_PC1, 5, 1)
+#define PIN_PC1__FLEXCOM9_IO1		PINMUX_PIN(PIN_PC1, 6, 4)
+#define PIN_PC2				66
+#define PIN_PC2__GPIO			PINMUX_PIN(PIN_PC2, 0, 0)
+#define PIN_PC2__SDMMC1_DAT3		PINMUX_PIN(PIN_PC2, 1, 1)
+#define PIN_PC2__FLEXCOM4_IO0		PINMUX_PIN(PIN_PC2, 2, 2)
+#define PIN_PC2__TCLK4			PINMUX_PIN(PIN_PC2, 4, 1)
+#define PIN_PC2__PWML2			PINMUX_PIN(PIN_PC2, 5, 1)
+#define PIN_PC2__FLEXCOM10_IO0		PINMUX_PIN(PIN_PC2, 6, 4)
+#define PIN_PC3				67
+#define PIN_PC3__GPIO			PINMUX_PIN(PIN_PC3, 0, 0)
+#define PIN_PC3__SDMMC1_WP		PINMUX_PIN(PIN_PC3, 1, 1)
+#define PIN_PC3__FLEXCOM4_IO1		PINMUX_PIN(PIN_PC3, 2, 2)
+#define PIN_PC3__TIOA5			PINMUX_PIN(PIN_PC3, 4, 1)
+#define PIN_PC3__PWMH2			PINMUX_PIN(PIN_PC3, 5, 1)
+#define PIN_PC3__FLEXCOM10_IO1		PINMUX_PIN(PIN_PC3, 6, 4)
+#define PIN_PC4				68
+#define PIN_PC4__GPIO			PINMUX_PIN(PIN_PC4, 0, 0)
+#define PIN_PC4__SDMMC1_CD		PINMUX_PIN(PIN_PC4, 1, 1)
+#define PIN_PC4__FLEXCOM4_IO2		PINMUX_PIN(PIN_PC4, 2, 2)
+#define PIN_PC4__FLEXCOM9_IO6		PINMUX_PIN(PIN_PC4, 3, 2)
+#define PIN_PC4__TIOB5			PINMUX_PIN(PIN_PC4, 4, 1)
+#define PIN_PC4__PWML3			PINMUX_PIN(PIN_PC4, 5, 1)
+#define PIN_PC4__FLEXCOM11_IO0		PINMUX_PIN(PIN_PC4, 6, 4)
+#define PIN_PC5				69
+#define PIN_PC5__GPIO			PINMUX_PIN(PIN_PC5, 0, 0)
+#define PIN_PC5__SDMMC1_1V8SEL		PINMUX_PIN(PIN_PC5, 1, 1)
+#define PIN_PC5__FLEXCOM4_IO3		PINMUX_PIN(PIN_PC5, 2, 2)
+#define PIN_PC5__FLEXCOM6_IO5		PINMUX_PIN(PIN_PC5, 3, 2)
+#define PIN_PC5__TCLK5			PINMUX_PIN(PIN_PC5, 4, 1)
+#define PIN_PC5__PWMH3			PINMUX_PIN(PIN_PC5, 5, 1)
+#define PIN_PC5__FLEXCOM11_IO1		PINMUX_PIN(PIN_PC5, 6, 4)
+#define PIN_PC6				70
+#define PIN_PC6__GPIO			PINMUX_PIN(PIN_PC6, 0, 0)
+#define PIN_PC6__FLEXCOM4_IO4		PINMUX_PIN(PIN_PC6, 2, 2)
+#define PIN_PC6__FLEXCOM6_IO6		PINMUX_PIN(PIN_PC6, 3, 2)
+#define PIN_PC7				71
+#define PIN_PC7__GPIO			PINMUX_PIN(PIN_PC7, 0, 0)
+#define PIN_PC7__I2SMCC0_DIN0		PINMUX_PIN(PIN_PC7, 1, 1)
+#define PIN_PC7__FLEXCOM7_IO0		PINMUX_PIN(PIN_PC7, 2, 2)
+#define PIN_PC8				72
+#define PIN_PC8__GPIO			PINMUX_PIN(PIN_PC8, 0, 0)
+#define PIN_PC8__I2SMCC0_DIN1		PINMUX_PIN(PIN_PC8, 1, 1)
+#define PIN_PC8__FLEXCOM7_IO1		PINMUX_PIN(PIN_PC8, 2, 2)
+#define PIN_PC9				73
+#define PIN_PC9__GPIO			PINMUX_PIN(PIN_PC9, 0, 0)
+#define PIN_PC9__I2SMCC0_DOUT3		PINMUX_PIN(PIN_PC9, 1, 1)
+#define PIN_PC9__FLEXCOM7_IO2		PINMUX_PIN(PIN_PC9, 2, 2)
+#define PIN_PC9__FLEXCOM1_IO0		PINMUX_PIN(PIN_PC9, 6, 4)
+#define PIN_PC10			74
+#define PIN_PC10__GPIO			PINMUX_PIN(PIN_PC10, 0, 0)
+#define PIN_PC10__I2SMCC0_DOUT2		PINMUX_PIN(PIN_PC10, 1, 1)
+#define PIN_PC10__FLEXCOM7_IO3		PINMUX_PIN(PIN_PC10, 2, 2)
+#define PIN_PC10__FLEXCOM1_IO1		PINMUX_PIN(PIN_PC10, 6, 4)
+#define PIN_PC11			75
+#define PIN_PC11__GPIO			PINMUX_PIN(PIN_PC11, 0, 0)
+#define PIN_PC11__I2SMCC1_CK		PINMUX_PIN(PIN_PC11, 1, 1)
+#define PIN_PC11__FLEXCOM7_IO4		PINMUX_PIN(PIN_PC11, 2, 2)
+#define PIN_PC11__FLEXCOM2_IO0		PINMUX_PIN(PIN_PC11, 6, 4)
+#define PIN_PC12			76
+#define PIN_PC12__GPIO			PINMUX_PIN(PIN_PC12, 0, 0)
+#define PIN_PC12__I2SMCC1_WS		PINMUX_PIN(PIN_PC12, 1, 1)
+#define PIN_PC12__FLEXCOM8_IO2		PINMUX_PIN(PIN_PC12, 2, 2)
+#define PIN_PC12__FLEXCOM2_IO1		PINMUX_PIN(PIN_PC12, 6, 4)
+#define PIN_PC13			77
+#define PIN_PC13__GPIO			PINMUX_PIN(PIN_PC13, 0, 0)
+#define PIN_PC13__I2SMCC1_MCK		PINMUX_PIN(PIN_PC13, 1, 1)
+#define PIN_PC13__FLEXCOM8_IO1		PINMUX_PIN(PIN_PC13, 2, 2)
+#define PIN_PC13__FLEXCOM3_IO0		PINMUX_PIN(PIN_PC13, 6, 4)
+#define PIN_PC14			78
+#define PIN_PC14__GPIO			PINMUX_PIN(PIN_PC14, 0, 0)
+#define PIN_PC14__I2SMCC1_DOUT0		PINMUX_PIN(PIN_PC14, 1, 1)
+#define PIN_PC14__FLEXCOM8_IO0		PINMUX_PIN(PIN_PC14, 2, 2)
+#define PIN_PC14__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC14, 6, 4)
+#define PIN_PC15			79
+#define PIN_PC15__GPIO			PINMUX_PIN(PIN_PC15, 0, 0)
+#define PIN_PC15__I2SMCC1_DOUT1		PINMUX_PIN(PIN_PC15, 1, 1)
+#define PIN_PC15__FLEXCOM8_IO3		PINMUX_PIN(PIN_PC15, 2, 2)
+#define PIN_PC15__FLEXCOM4_IO0		PINMUX_PIN(PIN_PC15, 6, 4)
+#define PIN_PC16			80
+#define PIN_PC16__GPIO			PINMUX_PIN(PIN_PC16, 0, 0)
+#define PIN_PC16__I2SMCC1_DOUT2		PINMUX_PIN(PIN_PC16, 1, 1)
+#define PIN_PC16__FLEXCOM8_IO4		PINMUX_PIN(PIN_PC16, 2, 2)
+#define PIN_PC16__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC16, 6, 4)
+#define PIN_PC17			81
+#define PIN_PC17__GPIO			PINMUX_PIN(PIN_PC17, 0, 0)
+#define PIN_PC17__I2SMCC1_DOUT3		PINMUX_PIN(PIN_PC17, 1, 1)
+#define PIN_PC17__EXT_IRQ0		PINMUX_PIN(PIN_PC17, 2, 3)
+#define PIN_PC17__FLEXCOM5_IO0		PINMUX_PIN(PIN_PC17, 6, 4)
+#define PIN_PC18			82
+#define PIN_PC18__GPIO			PINMUX_PIN(PIN_PC18, 0, 0)
+#define PIN_PC18__I2SMCC1_DIN0		PINMUX_PIN(PIN_PC18, 1, 1)
+#define PIN_PC18__FLEXCOM9_IO0		PINMUX_PIN(PIN_PC18, 2, 2)
+#define PIN_PC18__FLEXCOM5_IO1		PINMUX_PIN(PIN_PC18, 6, 4)
+#define PIN_PC19			83
+#define PIN_PC19__GPIO			PINMUX_PIN(PIN_PC19, 0, 0)
+#define PIN_PC19__I2SMCC1_DIN1		PINMUX_PIN(PIN_PC19, 1, 1)
+#define PIN_PC19__FLEXCOM9_IO1		PINMUX_PIN(PIN_PC19, 2, 2)
+#define PIN_PC19__FLEXCOM6_IO0		PINMUX_PIN(PIN_PC19, 6, 4)
+#define PIN_PC20			84
+#define PIN_PC20__GPIO			PINMUX_PIN(PIN_PC20, 0, 0)
+#define PIN_PC20__I2SMCC1_DIN2		PINMUX_PIN(PIN_PC20, 1, 1)
+#define PIN_PC20__FLEXCOM9_IO4		PINMUX_PIN(PIN_PC20, 2, 2)
+#define PIN_PC20__FLEXCOM6_IO1		PINMUX_PIN(PIN_PC20, 6, 4)
+#define PIN_PC21			85
+#define PIN_PC21__GPIO			PINMUX_PIN(PIN_PC21, 0, 0)
+#define PIN_PC21__I2SMCC1_DIN3		PINMUX_PIN(PIN_PC21, 1, 1)
+#define PIN_PC21__FLEXCOM9_IO2		PINMUX_PIN(PIN_PC21, 2, 2)
+#define PIN_PC21__D3			PINMUX_PIN(PIN_PC21, 4, 2)
+#define PIN_PC21__FLEXCOM6_IO0		PINMUX_PIN(PIN_PC21, 6, 5)
+#define PIN_PC22			86
+#define PIN_PC22__GPIO			PINMUX_PIN(PIN_PC22, 0, 0)
+#define PIN_PC22__I2SMCC0_DIN2		PINMUX_PIN(PIN_PC22, 1, 1)
+#define PIN_PC22__FLEXCOM9_IO3		PINMUX_PIN(PIN_PC22, 2, 2)
+#define PIN_PC22__D4			PINMUX_PIN(PIN_PC22, 4, 2)
+#define PIN_PC22__FLEXCOM6_IO1		PINMUX_PIN(PIN_PC22, 6, 5)
+#define PIN_PC23			87
+#define PIN_PC23__GPIO			PINMUX_PIN(PIN_PC23, 0, 0)
+#define PIN_PC23__I2SMCC0_DIN3		PINMUX_PIN(PIN_PC23, 1, 1)
+#define PIN_PC23__FLEXCOM0_IO5		PINMUX_PIN(PIN_PC23, 2, 3)
+#define PIN_PC23__D5			PINMUX_PIN(PIN_PC23, 4, 2)
+#define PIN_PC23__FLEXCOM7_IO0		PINMUX_PIN(PIN_PC23, 6, 5)
+#define PIN_PC24			88
+#define PIN_PC24__GPIO			PINMUX_PIN(PIN_PC24, 0, 0)
+#define PIN_PC24__FLEXCOM0_IO6		PINMUX_PIN(PIN_PC24, 2, 3)
+#define PIN_PC24__EXT_IRQ1		PINMUX_PIN(PIN_PC24, 3, 3)
+#define PIN_PC24__D6			PINMUX_PIN(PIN_PC24, 4, 2)
+#define PIN_PC24__FLEXCOM7_IO1		PINMUX_PIN(PIN_PC24, 6, 5)
+#define PIN_PC25			89
+#define PIN_PC25__GPIO			PINMUX_PIN(PIN_PC25, 0, 0)
+#define PIN_PC25__NTRST			PINMUX_PIN(PIN_PC25, 1, 1)
+#define PIN_PC26			90
+#define PIN_PC26__GPIO			PINMUX_PIN(PIN_PC26, 0, 0)
+#define PIN_PC26__TCK_SWCLK		PINMUX_PIN(PIN_PC26, 1, 1)
+#define PIN_PC27			91
+#define PIN_PC27__GPIO			PINMUX_PIN(PIN_PC27, 0, 0)
+#define PIN_PC27__TMS_SWDIO		PINMUX_PIN(PIN_PC27, 1, 1)
+#define PIN_PC28			92
+#define PIN_PC28__GPIO			PINMUX_PIN(PIN_PC28, 0, 0)
+#define PIN_PC28__TDI			PINMUX_PIN(PIN_PC28, 1, 1)
+#define PIN_PC29			93
+#define PIN_PC29__GPIO			PINMUX_PIN(PIN_PC29, 0, 0)
+#define PIN_PC29__TDO			PINMUX_PIN(PIN_PC29, 1, 1)
+#define PIN_PC30			94
+#define PIN_PC30__GPIO			PINMUX_PIN(PIN_PC30, 0, 0)
+#define PIN_PC30__FLEXCOM10_IO0		PINMUX_PIN(PIN_PC30, 2, 2)
+#define PIN_PC31			95
+#define PIN_PC31__GPIO			PINMUX_PIN(PIN_PC31, 0, 0)
+#define PIN_PC31__FLEXCOM10_IO1		PINMUX_PIN(PIN_PC31, 2, 2)
+#define PIN_PD0				96
+#define PIN_PD0__GPIO			PINMUX_PIN(PIN_PD0, 0, 0)
+#define PIN_PD0__FLEXCOM11_IO0		PINMUX_PIN(PIN_PD0, 2, 2)
+#define PIN_PD1				97
+#define PIN_PD1__GPIO			PINMUX_PIN(PIN_PD1, 0, 0)
+#define PIN_PD1__FLEXCOM11_IO1		PINMUX_PIN(PIN_PD1, 2, 2)
+#define PIN_PD2				98
+#define PIN_PD2__GPIO			PINMUX_PIN(PIN_PD2, 0, 0)
+#define PIN_PD2__SDMMC2_RSTN		PINMUX_PIN(PIN_PD2, 1, 1)
+#define PIN_PD2__PCK0			PINMUX_PIN(PIN_PD2, 2, 2)
+#define PIN_PD2__CANTX4			PINMUX_PIN(PIN_PD2, 3, 1)
+#define PIN_PD2__D7			PINMUX_PIN(PIN_PD2, 4, 2)
+#define PIN_PD2__TIOA0			PINMUX_PIN(PIN_PD2, 5, 2)
+#define PIN_PD2__FLEXCOM8_IO0		PINMUX_PIN(PIN_PD2, 6, 5)
+#define PIN_PD3				99
+#define PIN_PD3__GPIO			PINMUX_PIN(PIN_PD3, 0, 0)
+#define PIN_PD3__SDMMC2_CMD		PINMUX_PIN(PIN_PD3, 1, 1)
+#define PIN_PD3__FLEXCOM0_IO0		PINMUX_PIN(PIN_PD3, 2, 2)
+#define PIN_PD3__CANRX4			PINMUX_PIN(PIN_PD3, 3, 1)
+#define PIN_PD3__NANDRDY		PINMUX_PIN(PIN_PD3, 4, 2)
+#define PIN_PD3__TIOB0			PINMUX_PIN(PIN_PD3, 5, 2)
+#define PIN_PD3__FLEXCOM8_IO1		PINMUX_PIN(PIN_PD3, 6, 5)
+#define PIN_PD4				100
+#define PIN_PD4__GPIO			PINMUX_PIN(PIN_PD4, 0, 0)
+#define PIN_PD4__SDMMC2_CK		PINMUX_PIN(PIN_PD4, 1, 1)
+#define PIN_PD4__FLEXCOM0_IO1		PINMUX_PIN(PIN_PD4, 2, 2)
+#define PIN_PD4__CANTX5			PINMUX_PIN(PIN_PD4, 3, 1)
+#define PIN_PD4__NCS3_NANDCS		PINMUX_PIN(PIN_PD4, 4, 2)
+#define PIN_PD4__TCLK0			PINMUX_PIN(PIN_PD4, 5, 2)
+#define PIN_PD4__FLEXCOM9_IO0		PINMUX_PIN(PIN_PD4, 6, 5)
+#define PIN_PD5				101
+#define PIN_PD5__GPIO			PINMUX_PIN(PIN_PD5, 0, 0)
+#define PIN_PD5__SDMMC2_DAT0		PINMUX_PIN(PIN_PD5, 1, 1)
+#define PIN_PD5__FLEXCOM0_IO2		PINMUX_PIN(PIN_PD5, 2, 2)
+#define PIN_PD5__CANRX5			PINMUX_PIN(PIN_PD5, 3, 1)
+#define PIN_PD5__NWE_NWR0_NANDWE	PINMUX_PIN(PIN_PD5, 4, 2)
+#define PIN_PD5__TIOA1			PINMUX_PIN(PIN_PD5, 5, 2)
+#define PIN_PD5__FLEXCOM9_IO1		PINMUX_PIN(PIN_PD5, 6, 5)
+#define PIN_PD6				102
+#define PIN_PD6__GPIO			PINMUX_PIN(PIN_PD6, 0, 0)
+#define PIN_PD6__SDMMC2_DAT1		PINMUX_PIN(PIN_PD6, 1, 1)
+#define PIN_PD6__FLEXCOM0_IO3		PINMUX_PIN(PIN_PD6, 2, 2)
+#define PIN_PD6__SPDIF_RX		PINMUX_PIN(PIN_PD6, 3, 3)
+#define PIN_PD6__NRD_NANDOE		PINMUX_PIN(PIN_PD6, 4, 2)
+#define PIN_PD6__TIOB1			PINMUX_PIN(PIN_PD6, 5, 2)
+#define PIN_PD6__FLEXCOM10_IO0		PINMUX_PIN(PIN_PD6, 6, 5)
+#define PIN_PD7				103
+#define PIN_PD7__GPIO			PINMUX_PIN(PIN_PD7, 0, 0)
+#define PIN_PD7__SDMMC2_DAT2		PINMUX_PIN(PIN_PD7, 1, 1)
+#define PIN_PD7__FLEXCOM0_IO4		PINMUX_PIN(PIN_PD7, 2, 2)
+#define PIN_PD7__SPDIF_TX		PINMUX_PIN(PIN_PD7, 2, 2)
+#define PIN_PD7__A21_NANDALE		PINMUX_PIN(PIN_PD7, 4, 2)
+#define PIN_PD7__TCLK1			PINMUX_PIN(PIN_PD7, 5, 2)
+#define PIN_PD7__FLEXCOM10_IO1		PINMUX_PIN(PIN_PD7, 6, 5)
+#define PIN_PD8				104
+#define PIN_PD8__GPIO			PINMUX_PIN(PIN_PD8, 0, 0)
+#define PIN_PD8__SDMMC2_DAT3		PINMUX_PIN(PIN_PD8, 1, 1)
+#define PIN_PD8__I2SMCC0_DIN0		PINMUX_PIN(PIN_PD8, 3, 1)
+#define PIN_PD8__A22_NANDCLE		PINMUX_PIN(PIN_PD8, 4, 2)
+#define PIN_PD8__TIOA2			PINMUX_PIN(PIN_PD8, 5, 2)
+#define PIN_PD8__FLEXCOM11_IO0		PINMUX_PIN(PIN_PD8, 6, 5)
+#define PIN_PD9				105
+#define PIN_PD9__GPIO			PINMUX_PIN(PIN_PD9, 0, 0)
+#define PIN_PD9__SDMMC2_WP		PINMUX_PIN(PIN_PD9, 1, 1)
+#define PIN_PD9__I2SMCC0_DIN1		PINMUX_PIN(PIN_PD9, 3, 2)
+#define PIN_PD9__D0			PINMUX_PIN(PIN_PD9, 4, 2)
+#define PIN_PD9__TIOB2			PINMUX_PIN(PIN_PD9, 5, 2)
+#define PIN_PD9__FLEXCOM11_IO1		PINMUX_PIN(PIN_PD9, 6, 5)
+#define PIN_PD10			106
+#define PIN_PD10__GPIO			PINMUX_PIN(PIN_PD10, 0, 0)
+#define PIN_PD10__SDMMC2_CD		PINMUX_PIN(PIN_PD10, 1, 1)
+#define PIN_PD10__PCK6			PINMUX_PIN(PIN_PD10, 2, 2)
+#define PIN_PD10__I2SMCC0_DIN2		PINMUX_PIN(PIN_PD10, 3, 2)
+#define PIN_PD10__D1			PINMUX_PIN(PIN_PD10, 4, 2)
+#define PIN_PD10__TCLK2			PINMUX_PIN(PIN_PD10, 5, 2)
+#define PIN_PD10__FLEXCOM0_IO0		PINMUX_PIN(PIN_PD10, 6, 3)
+#define PIN_PD11			107
+#define PIN_PD11__GPIO			PINMUX_PIN(PIN_PD11, 0, 0)
+#define PIN_PD11__SDMMC2_1V8SEL		PINMUX_PIN(PIN_PD11, 1, 1)
+#define PIN_PD11__PCK7			PINMUX_PIN(PIN_PD11, 2, 2)
+#define PIN_PD11__I2SMCC0_DIN3		PINMUX_PIN(PIN_PD11, 3, 2)
+#define PIN_PD11__D2			PINMUX_PIN(PIN_PD11, 4, 2)
+#define PIN_PD11__TIOA3			PINMUX_PIN(PIN_PD11, 5, 2)
+#define PIN_PD11__FLEXCOM0_IO1		PINMUX_PIN(PIN_PD11, 6, 3)
+#define PIN_PD12			108
+#define PIN_PD12__GPIO			PINMUX_PIN(PIN_PD12, 0, 0)
+#define PIN_PD12__PCK1			PINMUX_PIN(PIN_PD12, 1, 2)
+#define PIN_PD12__FLEXCOM1_IO0		PINMUX_PIN(PIN_PD12, 2, 2)
+#define PIN_PD12__CANTX0		PINMUX_PIN(PIN_PD12, 4, 2)
+#define PIN_PD12__TIOB3			PINMUX_PIN(PIN_PD12, 5, 2)
+#define PIN_PD13			109
+#define PIN_PD13__GPIO			PINMUX_PIN(PIN_PD13, 0, 0)
+#define PIN_PD13__I2SMCC0_CK		PINMUX_PIN(PIN_PD13, 1, 2)
+#define PIN_PD13__FLEXCOM1_IO1		PINMUX_PIN(PIN_PD13, 2, 2)
+#define PIN_PD13__PWML0			PINMUX_PIN(PIN_PD13, 3, 4)
+#define PIN_PD13__CANRX0		PINMUX_PIN(PIN_PD13, 4, 2)
+#define PIN_PD13__TCLK3			PINMUX_PIN(PIN_PD13, 5, 2)
+#define PIN_PD14			110
+#define PIN_PD14__GPIO			PINMUX_PIN(PIN_PD14, 0, 0)
+#define PIN_PD14__I2SMCC0_MCK		PINMUX_PIN(PIN_PD14, 1, 2)
+#define PIN_PD14__FLEXCOM1_IO2		PINMUX_PIN(PIN_PD14, 2, 2)
+#define PIN_PD14__PWMH0			PINMUX_PIN(PIN_PD14, 3, 4)
+#define PIN_PD14__CANTX1		PINMUX_PIN(PIN_PD14, 4, 2)
+#define PIN_PD14__TIOA4			PINMUX_PIN(PIN_PD14, 5, 2)
+#define PIN_PD14__FLEXCOM2_IO0		PINMUX_PIN(PIN_PD14, 6, 5)
+#define PIN_PD15			111
+#define PIN_PD15__GPIO			PINMUX_PIN(PIN_PD15, 0, 0)
+#define PIN_PD15__I2SMCC0_WS		PINMUX_PIN(PIN_PD15, 1, 2)
+#define PIN_PD15__FLEXCOM1_IO3		PINMUX_PIN(PIN_PD15, 2, 2)
+#define PIN_PD15__PWML1			PINMUX_PIN(PIN_PD15, 3, 4)
+#define PIN_PD15__CANRX1		PINMUX_PIN(PIN_PD15, 4, 2)
+#define PIN_PD15__TIOB4			PINMUX_PIN(PIN_PD15, 5, 2)
+#define PIN_PD15__FLEXCOM2_IO1		PINMUX_PIN(PIN_PD15, 6, 5)
+#define PIN_PD16			112
+#define PIN_PD16__GPIO			PINMUX_PIN(PIN_PD16, 0, 0)
+#define PIN_PD16__I2SMCC0_DOUT0		PINMUX_PIN(PIN_PD16, 1, 2)
+#define PIN_PD16__FLEXCOM1_IO4		PINMUX_PIN(PIN_PD16, 2, 2)
+#define PIN_PD16__PWMH1			PINMUX_PIN(PIN_PD16, 3, 4)
+#define PIN_PD16__CANTX2		PINMUX_PIN(PIN_PD16, 4, 2)
+#define PIN_PD16__TCLK4			PINMUX_PIN(PIN_PD16, 5, 2)
+#define PIN_PD16__FLEXCOM3_IO0		PINMUX_PIN(PIN_PD16, 6, 5)
+#define PIN_PD17			113
+#define PIN_PD17__GPIO			PINMUX_PIN(PIN_PD17, 0, 0)
+#define PIN_PD17__I2SMCC0_DOUT1		PINMUX_PIN(PIN_PD17, 1, 2)
+#define PIN_PD17__FLEXCOM2_IO0		PINMUX_PIN(PIN_PD17, 2, 2)
+#define PIN_PD17__PWML2			PINMUX_PIN(PIN_PD17, 3, 4)
+#define PIN_PD17__CANRX2		PINMUX_PIN(PIN_PD17, 4, 2)
+#define PIN_PD17__TIOA5			PINMUX_PIN(PIN_PD17, 5, 2)
+#define PIN_PD17__FLEXCOM3_IO1		PINMUX_PIN(PIN_PD17, 6, 5)
+#define PIN_PD18			114
+#define PIN_PD18__GPIO			PINMUX_PIN(PIN_PD18, 0, 0)
+#define PIN_PD18__I2SMCC0_DOUT2		PINMUX_PIN(PIN_PD18, 1, 2)
+#define PIN_PD18__FLEXCOM2_IO1		PINMUX_PIN(PIN_PD18, 2, 2)
+#define PIN_PD18__PWMH2			PINMUX_PIN(PIN_PD18, 3, 4)
+#define PIN_PD18__CANTX3		PINMUX_PIN(PIN_PD18, 4, 2)
+#define PIN_PD18__TIOB5			PINMUX_PIN(PIN_PD18, 5, 2)
+#define PIN_PD18__FLEXCOM4_IO0		PINMUX_PIN(PIN_PD18, 6, 5)
+#define PIN_PD19			115
+#define PIN_PD19__GPIO			PINMUX_PIN(PIN_PD19, 0, 0)
+#define PIN_PD19__I2SMCC0_DOUT3		PINMUX_PIN(PIN_PD19, 1, 2)
+#define PIN_PD19__FLEXCOM2_IO2		PINMUX_PIN(PIN_PD19, 2, 2)
+#define PIN_PD19__PWML3			PINMUX_PIN(PIN_PD19, 3, 4)
+#define PIN_PD19__CANRX3		PINMUX_PIN(PIN_PD19, 4, 2)
+#define PIN_PD19__TCLK5			PINMUX_PIN(PIN_PD19, 5, 2)
+#define PIN_PD19__FLEXCOM4_IO1		PINMUX_PIN(PIN_PD19, 6, 5)
+#define PIN_PD20			116
+#define PIN_PD20__GPIO			PINMUX_PIN(PIN_PD20, 0, 0)
+#define PIN_PD20__PCK0			PINMUX_PIN(PIN_PD20, 1, 3)
+#define PIN_PD20__FLEXCOM2_IO3		PINMUX_PIN(PIN_PD20, 2, 2)
+#define PIN_PD20__PWMH3			PINMUX_PIN(PIN_PD20, 3, 4)
+#define PIN_PD20__CANTX4		PINMUX_PIN(PIN_PD20, 4, 2)
+#define PIN_PD20__FLEXCOM5_IO0		PINMUX_PIN(PIN_PD20, 6, 5)
+#define PIN_PD21			117
+#define PIN_PD21__GPIO			PINMUX_PIN(PIN_PD21, 0, 0)
+#define PIN_PD21__PCK1			PINMUX_PIN(PIN_PD21, 1, 3)
+#define PIN_PD21__FLEXCOM2_IO4		PINMUX_PIN(PIN_PD21, 2, 2)
+#define PIN_PD21__CANRX4		PINMUX_PIN(PIN_PD21, 4, 2)
+#define PIN_PD21__FLEXCOM5_IO1		PINMUX_PIN(PIN_PD21, 6, 5)
+#define PIN_PD21__G1_TXEN		PINMUX_PIN(PIN_PD21, 7, 1)
+#define PIN_PD22			118
+#define PIN_PD22__GPIO			PINMUX_PIN(PIN_PD22, 0, 0)
+#define PIN_PD22__PDMC0_CLK		PINMUX_PIN(PIN_PD22, 1, 2)
+#define PIN_PD22__PWMEXTRG0		PINMUX_PIN(PIN_PD22, 3, 4)
+#define PIN_PD22__RD1			PINMUX_PIN(PIN_PD22, 4, 2)
+#define PIN_PD22__CANTX5		PINMUX_PIN(PIN_PD22, 6, 2)
+#define PIN_PD22__G1_TX0		PINMUX_PIN(PIN_PD22, 7, 1)
+#define PIN_PD23			119
+#define PIN_PD23__GPIO			PINMUX_PIN(PIN_PD23, 0, 0)
+#define PIN_PD23__PDMC0_DS0		PINMUX_PIN(PIN_PD23, 1, 2)
+#define PIN_PD23__PWMEXTRG1		PINMUX_PIN(PIN_PD23, 3, 4)
+#define PIN_PD23__RF1			PINMUX_PIN(PIN_PD23, 4, 2)
+#define PIN_PD23__ISC_MCK		PINMUX_PIN(PIN_PD23, 5, 2)
+#define PIN_PD23__CANRX5		PINMUX_PIN(PIN_PD23, 6, 2)
+#define PIN_PD23__G1_TX1		PINMUX_PIN(PIN_PD23, 7, 1)
+#define PIN_PD24			120
+#define PIN_PD24__GPIO			PINMUX_PIN(PIN_PD24, 0, 0)
+#define PIN_PD24__PDMC0_DS1		PINMUX_PIN(PIN_PD24, 1, 2)
+#define PIN_PD24__PWMFI0		PINMUX_PIN(PIN_PD24, 3, 4)
+#define PIN_PD24__RK1			PINMUX_PIN(PIN_PD24, 4, 2)
+#define PIN_PD24__ISC_D0		PINMUX_PIN(PIN_PD24, 5, 2)
+#define PIN_PD24__G1_RXDV		PINMUX_PIN(PIN_PD24, 7, 1)
+#define PIN_PD25			121
+#define PIN_PD25__GPIO			PINMUX_PIN(PIN_PD25, 0, 0)
+#define PIN_PD25__PDMC1_CLK		PINMUX_PIN(PIN_PD25, 1, 2)
+#define PIN_PD25__FLEXCOM5_IO0		PINMUX_PIN(PIN_PD25, 2, 2)
+#define PIN_PD25__PWMFI1		PINMUX_PIN(PIN_PD25, 3, 4)
+#define PIN_PD25__TD1			PINMUX_PIN(PIN_PD25, 4, 2)
+#define PIN_PD25__ISC_D1		PINMUX_PIN(PIN_PD25, 5, 2)
+#define PIN_PD25__G1_RX0		PINMUX_PIN(PIN_PD25, 7, 1)
+#define PIN_PD26			122
+#define PIN_PD26__GPIO			PINMUX_PIN(PIN_PD26, 0, 0)
+#define PIN_PD26__PDMC1_DS0		PINMUX_PIN(PIN_PD26, 1, 2)
+#define PIN_PD26__FLEXCOM5_IO1		PINMUX_PIN(PIN_PD26, 2, 2)
+#define PIN_PD26__ADTRG			PINMUX_PIN(PIN_PD26, 3, 3)
+#define PIN_PD26__TF1			PINMUX_PIN(PIN_PD26, 4, 2)
+#define PIN_PD26__ISC_D2		PINMUX_PIN(PIN_PD26, 5, 2)
+#define PIN_PD26__G1_RX1		PINMUX_PIN(PIN_PD26, 7, 1)
+#define PIN_PD27			123
+#define PIN_PD27__GPIO			PINMUX_PIN(PIN_PD27, 0, 0)
+#define PIN_PD27__PDMC1_DS1		PINMUX_PIN(PIN_PD27, 1, 2)
+#define PIN_PD27__FLEXCOM5_IO2		PINMUX_PIN(PIN_PD27, 2, 2)
+#define PIN_PD27__TIOA0			PINMUX_PIN(PIN_PD27, 3, 3)
+#define PIN_PD27__TK1			PINMUX_PIN(PIN_PD27, 4, 2)
+#define PIN_PD27__ISC_D3		PINMUX_PIN(PIN_PD27, 5, 2)
+#define PIN_PD27__G1_RXER		PINMUX_PIN(PIN_PD27, 7, 1)
+#define PIN_PD28			124
+#define PIN_PD28__GPIO			PINMUX_PIN(PIN_PD28, 0, 0)
+#define PIN_PD28__RD0			PINMUX_PIN(PIN_PD28, 1, 2)
+#define PIN_PD28__FLEXCOM5_IO3		PINMUX_PIN(PIN_PD28, 2, 2)
+#define PIN_PD28__TIOB0			PINMUX_PIN(PIN_PD28, 3, 3)
+#define PIN_PD28__I2SMCC1_CK		PINMUX_PIN(PIN_PD28, 4, 2)
+#define PIN_PD28__ISC_D4		PINMUX_PIN(PIN_PD28, 5, 2)
+#define PIN_PD28__PWML3			PINMUX_PIN(PIN_PD28, 6, 5)
+#define PIN_PD28__G1_MDC		PINMUX_PIN(PIN_PD28, 7, 1)
+#define PIN_PD29			125
+#define PIN_PD29__GPIO			PINMUX_PIN(PIN_PD29, 0, 0)
+#define PIN_PD29__RF0			PINMUX_PIN(PIN_PD29, 1, 2)
+#define PIN_PD29__FLEXCOM5_IO4		PINMUX_PIN(PIN_PD29, 2, 2)
+#define PIN_PD29__TCLK0			PINMUX_PIN(PIN_PD29, 3, 3)
+#define PIN_PD29__I2SMCC1_WS		PINMUX_PIN(PIN_PD29, 4, 2)
+#define PIN_PD29__ISC_D5		PINMUX_PIN(PIN_PD29, 5, 2)
+#define PIN_PD29__PWMH3			PINMUX_PIN(PIN_PD29, 6, 5)
+#define PIN_PD29__G1_MDIO		PINMUX_PIN(PIN_PD29, 7, 1)
+#define PIN_PD30			126
+#define PIN_PD30__GPIO			PINMUX_PIN(PIN_PD30, 0, 0)
+#define PIN_PD30__RK0			PINMUX_PIN(PIN_PD30, 1, 2)
+#define PIN_PD30__FLEXCOM6_IO0		PINMUX_PIN(PIN_PD30, 2, 2)
+#define PIN_PD30__TIOA1			PINMUX_PIN(PIN_PD30, 3, 3)
+#define PIN_PD30__I2SMCC1_MCK		PINMUX_PIN(PIN_PD30, 4, 2)
+#define PIN_PD30__ISC_D6		PINMUX_PIN(PIN_PD30, 5, 2)
+#define PIN_PD30__PWMEXTRG0		PINMUX_PIN(PIN_PD30, 6, 5)
+#define PIN_PD30__G1_TXCK		PINMUX_PIN(PIN_PD30, 7, 1)
+#define PIN_PD31			127
+#define PIN_PD31__GPIO			PINMUX_PIN(PIN_PD31, 0, 0)
+#define PIN_PD31__TD0			PINMUX_PIN(PIN_PD31, 1, 2)
+#define PIN_PD31__FLEXCOM6_IO1		PINMUX_PIN(PIN_PD31, 2, 2)
+#define PIN_PD31__TIOB1			PINMUX_PIN(PIN_PD31, 3, 3)
+#define PIN_PD31__I2SMCC1_DOUT0		PINMUX_PIN(PIN_PD31, 4, 2)
+#define PIN_PD31__ISC_D7		PINMUX_PIN(PIN_PD31, 5, 2)
+#define PIN_PD31__PWM_EXTRG1		PINMUX_PIN(PIN_PD31, 6, 5)
+#define PIN_PD31__G1_TX2		PINMUX_PIN(PIN_PD31, 7, 1)
+#define PIN_PE0				128
+#define PIN_PE0__GPIO			PINMUX_PIN(PIN_PE0, 0, 0)
+#define PIN_PE0__TF0			PINMUX_PIN(PIN_PE0, 1, 2)
+#define PIN_PE0__FLEXCOM6_IO2		PINMUX_PIN(PIN_PE0, 2, 2)
+#define PIN_PE0__TCLK1			PINMUX_PIN(PIN_PE0, 3, 3)
+#define PIN_PE0__I2SMCC1_DOUT1		PINMUX_PIN(PIN_PE0, 4, 2)
+#define PIN_PE0__ISC_HSYNC		PINMUX_PIN(PIN_PE0, 5, 2)
+#define PIN_PE0__PWMFI0			PINMUX_PIN(PIN_PE0, 6, 5)
+#define PIN_PE0__G1_TX3			PINMUX_PIN(PIN_PE0, 7, 1)
+#define PIN_PE1				129
+#define PIN_PE1__GPIO			PINMUX_PIN(PIN_PE1, 0, 0)
+#define PIN_PE1__TK0			PINMUX_PIN(PIN_PE1, 1, 2)
+#define PIN_PE1__FLEXCOM6_IO3		PINMUX_PIN(PIN_PE1, 2, 2)
+#define PIN_PE1__TIOA2			PINMUX_PIN(PIN_PE1, 3, 3)
+#define PIN_PE1__I2SMCC1_DOUT2		PINMUX_PIN(PIN_PE1, 4, 2)
+#define PIN_PE1__ISC_VSYNC		PINMUX_PIN(PIN_PE1, 5, 2)
+#define PIN_PE1__PWMFI1			PINMUX_PIN(PIN_PE1, 6, 5)
+#define PIN_PE1__G1_RX2			PINMUX_PIN(PIN_PE1, 7, 1)
+#define PIN_PE2				130
+#define PIN_PE2__GPIO			PINMUX_PIN(PIN_PE2, 0, 0)
+#define PIN_PE2__PWML0			PINMUX_PIN(PIN_PE2, 1, 5)
+#define PIN_PE2__FLEXCOM6_IO4		PINMUX_PIN(PIN_PE2, 2, 2)
+#define PIN_PE2__TIOB2			PINMUX_PIN(PIN_PE2, 3, 3)
+#define PIN_PE2__I2SMCC1_DOUT3		PINMUX_PIN(PIN_PE2, 4, 2)
+#define PIN_PE2__ISC_FIELD		PINMUX_PIN(PIN_PE2, 5, 2)
+#define PIN_PE2__G1_RX3			PINMUX_PIN(PIN_PE2, 7, 1)
+#define PIN_PE3				131
+#define PIN_PE3__GPIO			PINMUX_PIN(PIN_PE3, 0, 0)
+#define PIN_PE3__PWMH0			PINMUX_PIN(PIN_PE3, 1, 5)
+#define PIN_PE3__FLEXCOM0_IO0		PINMUX_PIN(PIN_PE3, 2, 4)
+#define PIN_PE3__TCLK2			PINMUX_PIN(PIN_PE3, 3, 3)
+#define PIN_PE3__I2SMCC1_DIN0		PINMUX_PIN(PIN_PE3, 4, 2)
+#define PIN_PE3__ISC_PCK		PINMUX_PIN(PIN_PE3, 5, 2)
+#define PIN_PE3__G1_RXCK		PINMUX_PIN(PIN_PE3, 7, 1)
+#define PIN_PE4				132
+#define PIN_PE4__GPIO			PINMUX_PIN(PIN_PE4, 0, 0)
+#define PIN_PE4__PWML1			PINMUX_PIN(PIN_PE4, 1, 5)
+#define PIN_PE4__FLEXCOM0_IO1		PINMUX_PIN(PIN_PE4, 2, 4)
+#define PIN_PE4__TIOA3			PINMUX_PIN(PIN_PE4, 3, 3)
+#define PIN_PE4__I2SMCC1_DIN1		PINMUX_PIN(PIN_PE4, 4, 2)
+#define PIN_PE4__ISC_D8			PINMUX_PIN(PIN_PE4, 5, 2)
+#define PIN_PE4__G1_TXER		PINMUX_PIN(PIN_PE4, 7, 1)
+#define PIN_PE5				133
+#define PIN_PE5__GPIO			PINMUX_PIN(PIN_PE5, 0, 0)
+#define PIN_PE5__PWMH1			PINMUX_PIN(PIN_PE5, 1, 5)
+#define PIN_PE5__FLEXCOM0_IO2		PINMUX_PIN(PIN_PE5, 2, 4)
+#define PIN_PE5__TIOB3			PINMUX_PIN(PIN_PE5, 3, 3)
+#define PIN_PE5__I2SMCC1_DIN2		PINMUX_PIN(PIN_PE5, 4, 2)
+#define PIN_PE5__ISC_D9			PINMUX_PIN(PIN_PE5, 5, 2)
+#define PIN_PE5__G1_COL			PINMUX_PIN(PIN_PE5, 7, 1)
+#define PIN_PE6				134
+#define PIN_PE6__GPIO			PINMUX_PIN(PIN_PE6, 0, 0)
+#define PIN_PE6__PWML2			PINMUX_PIN(PIN_PE6, 1, 5)
+#define PIN_PE6__FLEXCOM0_IO3		PINMUX_PIN(PIN_PE6, 2, 4)
+#define PIN_PE6__TCLK3			PINMUX_PIN(PIN_PE6, 3, 3)
+#define PIN_PE6__I2SMCC1_DIN3		PINMUX_PIN(PIN_PE6, 4, 2)
+#define PIN_PE6__ISC_D10		PINMUX_PIN(PIN_PE6, 5, 2)
+#define PIN_PE6__G1_CRS			PINMUX_PIN(PIN_PE6, 7, 1)
+#define PIN_PE7				135
+#define PIN_PE7__GPIO			PINMUX_PIN(PIN_PE7, 0, 0)
+#define PIN_PE7__PWMH2			PINMUX_PIN(PIN_PE7, 1, 5)
+#define PIN_PE7__FLEXCOM0_IO4		PINMUX_PIN(PIN_PE7, 2, 4)
+#define PIN_PE7__TIOA4			PINMUX_PIN(PIN_PE7, 3, 3)
+#define PIN_PE7__ISC_D11		PINMUX_PIN(PIN_PE7, 5, 2)
+#define PIN_PE7__G1_TSUCOMP		PINMUX_PIN(PIN_PE7, 7, 1)
diff --git a/src/arm/microchip/sama7g5.dtsi b/src/arm/microchip/sama7g5.dtsi
new file mode 100644
index 0000000..269e0a3
--- /dev/null
+++ b/src/arm/microchip/sama7g5.dtsi
@@ -0,0 +1,1016 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *  sama7g5.dtsi - Device Tree Include file for SAMA7G5 family SoC
+ *
+ *  Copyright (C) 2020 Microchip Technology, Inc. and its subsidiaries
+ *
+ *  Author: Eugen Hristev <eugen.hristev@microchip.com>
+ *  Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ *
+ */
+
+#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/nvmem/microchip,sama7g5-otpc.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	model = "Microchip SAMA7G5 family SoC";
+	compatible = "microchip,sama7g5";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-90000000 {
+			opp-hz = /bits/ 64 <90000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+			opp-suspend;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1150000 1125000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-1000000002 {
+			opp-hz = /bits/ 64 <1000000002>;
+			opp-microvolt = <1250000 1225000 1300000>;
+			clock-latency-ns = <320000>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&thermal_sensor>;
+
+			trips {
+				cpu_normal: cpu-alert0 {
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				cpu_hot: cpu-alert1 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_normal>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		usb_clk: usb_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <48000000>;
+		};
+	};
+
+	vddout25: fixed-regulator-vddout25 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDDOUT25";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-boot-on;
+		status = "disabled";
+	};
+
+	ns_sram: sram@100000 {
+		compatible = "mmio-sram";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x100000 0x20000>;
+		ranges;
+	};
+
+	thermal_sensor: thermal-sensor {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc AT91_SAMA7G5_ADC_TEMP_CHANNEL>;
+		io-channel-names = "sensor-channel";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		nfc_sram: sram@600000 {
+			compatible = "mmio-sram";
+			no-memory-wc;
+			reg = <0x00600000 0x2400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x00600000 0x2400>;
+		};
+
+		nfc_io: nfc-io@10000000 {
+			compatible = "atmel,sama5d3-nfc-io", "syscon";
+			reg = <0x10000000 0x8000000>;
+		};
+
+		ebi: ebi@40000000 {
+			compatible = "atmel,sama5d3-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&hsmc>;
+			reg = <0x40000000 0x20000000>;
+			ranges = <0x0 0x0 0x40000000 0x8000000
+				  0x1 0x0 0x48000000 0x8000000
+				  0x2 0x0 0x50000000 0x8000000
+				  0x3 0x0 0x58000000 0x8000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK1>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,sama5d3-nand-controller";
+				atmel,nfc-sram = <&nfc_sram>;
+				atmel,nfc-io = <&nfc_io>;
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		securam: sram@e0000000 {
+			compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram";
+			reg = <0xe0000000 0x4000>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xe0000000 0x4000>;
+			no-memory-wc;
+		};
+
+		secumod: secumod@e0004000 {
+			compatible = "microchip,sama7g5-secumod", "atmel,sama5d2-secumod", "syscon";
+			reg = <0xe0004000 0x4000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		sfrbu: sfr@e0008000 {
+			compatible = "microchip,sama7g5-sfrbu", "atmel,sama5d2-sfrbu", "syscon";
+			reg = <0xe0008000 0x20>;
+		};
+
+		pioA: pinctrl@e0014000 {
+			compatible = "microchip,sama7g5-pinctrl";
+			reg = <0xe0014000 0x800>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+		};
+
+		pmc: clock-controller@e0018000 {
+			compatible = "microchip,sama7g5-pmc", "syscon";
+			reg = <0xe0018000 0x200>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#clock-cells = <2>;
+			clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+			clock-names = "td_slck", "md_slck", "main_xtal";
+		};
+
+		reset_controller: reset-controller@e001d000 {
+			compatible = "microchip,sama7g5-rstc";
+			reg = <0xe001d000 0xc>, <0xe001d0e4 0x4>;
+			#reset-cells = <1>;
+			clocks = <&clk32k 0>;
+		};
+
+		shdwc: poweroff@e001d010 {
+			compatible = "microchip,sama7g5-shdwc", "syscon";
+			reg = <0xe001d010 0x10>;
+			clocks = <&clk32k 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			atmel,wakeup-rtc-timer;
+			atmel,wakeup-rtt-timer;
+			status = "disabled";
+		};
+
+		rtt: rtc@e001d020 {
+			compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
+			reg = <0xe001d020 0x30>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 0>;
+		};
+
+		clk32k: clock-controller@e001d050 {
+			compatible = "microchip,sama7g5-sckc", "microchip,sam9x60-sckc";
+			reg = <0xe001d050 0x4>;
+			clocks = <&slow_xtal>;
+			#clock-cells = <1>;
+		};
+
+		gpbr: gpbr@e001d060 {
+			compatible = "microchip,sama7g5-gpbr", "syscon";
+			reg = <0xe001d060 0x48>;
+		};
+
+		rtc: rtc@e001d0a8 {
+			compatible = "microchip,sama7g5-rtc", "microchip,sam9x60-rtc";
+			reg = <0xe001d0a8 0x30>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 1>;
+		};
+
+		ps_wdt: watchdog@e001d180 {
+			compatible = "microchip,sama7g5-wdt";
+			reg = <0xe001d180 0x24>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 0>;
+		};
+
+		chipid@e0020000 {
+			compatible = "microchip,sama7g5-chipid";
+			reg = <0xe0020000 0x8>;
+		};
+
+		tcb1: timer@e0800000 {
+			compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe0800000 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 91>, <&pmc PMC_TYPE_PERIPHERAL 92>, <&pmc PMC_TYPE_PERIPHERAL 93>, <&clk32k 1>;
+			clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+		};
+
+		hsmc: hsmc@e0808000 {
+			compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
+			reg = <0xe0808000 0x1000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pmecc: ecc-engine@e0808070 {
+				compatible = "atmel,sama5d2-pmecc";
+				reg = <0xe0808070 0x490>,
+				      <0xe0808500 0x200>;
+			};
+		};
+
+		qspi0: spi@e080c000 {
+			compatible = "microchip,sama7g5-ospi";
+			reg = <0xe080c000 0x400>, <0x20000000 0x10000000>;
+			reg-names = "qspi_base", "qspi_mmap";
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(41)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(40)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 78>, <&pmc PMC_TYPE_GCK 78>;
+			clock-names = "pclk", "gclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		qspi1: spi@e0810000 {
+			compatible = "microchip,sama7g5-qspi";
+			reg = <0xe0810000 0x400>, <0x30000000 0x10000000>;
+			reg-names = "qspi_base", "qspi_mmap";
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(43)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(42)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 79>, <&pmc PMC_TYPE_GCK 79>;
+			clock-names = "pclk", "gclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e0828000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0828000 0x100>, <0x100000 0x7800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 61>, <&pmc PMC_TYPE_GCK 61>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 61>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can1: can@e082c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe082c000 0x100>, <0x100000 0xbc00>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 62>, <&pmc PMC_TYPE_GCK 62>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 62>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can2: can@e0830000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0830000 0x100>, <0x100000 0x10000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 63>, <&pmc PMC_TYPE_GCK 63>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 63>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0xbc00 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can3: can@e0834000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0834000 0x100>, <0x110000 0x4400>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 64>, <&pmc PMC_TYPE_GCK 64>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 64>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can4: can@e0838000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0838000 0x100>, <0x110000 0x8800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 65>, <&pmc PMC_TYPE_GCK 65>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 65>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x4400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can5: can@e083c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe083c000 0x100>, <0x110000 0xcc00>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 66>, <&pmc PMC_TYPE_GCK 66>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 66>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x8800 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		adc: adc@e1000000 {
+			compatible = "microchip,sama7g5-adc";
+			reg = <0xe1000000 0x200>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_GCK 26>;
+			assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
+			assigned-clock-rates = <100000000>;
+			clock-names = "adc_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(0)>;
+			dma-names = "rx";
+			atmel,min-sample-rate-hz = <200000>;
+			atmel,max-sample-rate-hz = <20000000>;
+			atmel,startup-time-ms = <4>;
+			#io-channel-cells = <1>;
+			nvmem-cells = <&temperature_calib>;
+			nvmem-cell-names = "temperature_calib";
+			status = "disabled";
+		};
+
+		sdmmc0: mmc@e1204000 {
+			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0xe1204000 0x4000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 80>, <&pmc PMC_TYPE_GCK 80>;
+			clock-names = "hclock", "multclk";
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clocks = <&pmc PMC_TYPE_GCK 80>;
+			assigned-clock-rates = <200000000>;
+			microchip,sdcal-inverted;
+			status = "disabled";
+		};
+
+		sdmmc1: mmc@e1208000 {
+			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0xe1208000 0x4000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 81>, <&pmc PMC_TYPE_GCK 81>;
+			clock-names = "hclock", "multclk";
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clocks = <&pmc PMC_TYPE_GCK 81>;
+			assigned-clock-rates = <200000000>;
+			microchip,sdcal-inverted;
+			status = "disabled";
+		};
+
+		sdmmc2: mmc@e120c000 {
+			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0xe120c000 0x4000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 82>, <&pmc PMC_TYPE_GCK 82>;
+			clock-names = "hclock", "multclk";
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clocks = <&pmc PMC_TYPE_GCK 82>;
+			assigned-clock-rates = <200000000>;
+			microchip,sdcal-inverted;
+			status = "disabled";
+		};
+
+		csi2dc: csi2dc@e1404000 {
+			compatible = "microchip,sama7g5-csi2dc";
+			reg = <0xe1404000 0x500>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&xisc>;
+			clock-names = "pclk", "scck";
+			assigned-clocks = <&xisc>;
+			assigned-clock-rates = <266000000>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					csi2dc_in: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					csi2dc_out: endpoint {
+						bus-width = <14>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+						remote-endpoint = <&xisc_in>;
+					};
+				};
+			};
+		};
+
+		xisc: xisc@e1408000 {
+			compatible = "microchip,sama7g5-isc";
+			reg = <0xe1408000 0x2000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
+			clock-names = "hclock";
+			#clock-cells = <0>;
+			clock-output-names = "isc-mck";
+			status = "disabled";
+
+			port {
+				xisc_in: endpoint {
+					bus-type = <5>; /* Parallel */
+					bus-width = <14>;
+					hsync-active = <1>;
+					vsync-active = <1>;
+					remote-endpoint = <&csi2dc_out>;
+				};
+			};
+		};
+
+		pwm: pwm@e1604000 {
+			compatible = "microchip,sama7g5-pwm", "atmel,sama5d2-pwm";
+			reg = <0xe1604000 0x4000>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			#pwm-cells = <3>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 77>;
+			status = "disabled";
+		};
+
+		pdmc0: sound@e1608000 {
+			compatible = "microchip,sama7g5-pdmc";
+			reg = <0xe1608000 0x1000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			#sound-dai-cells = <0>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(37)>;
+			dma-names = "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 68>, <&pmc PMC_TYPE_GCK 68>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		pdmc1: sound@e160c000 {
+			compatible = "microchip,sama7g5-pdmc";
+			reg = <0xe160c000 0x1000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			#sound-dai-cells = <0>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(38)>;
+			dma-names = "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 69>, <&pmc PMC_TYPE_GCK 69>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		spdifrx: spdifrx@e1614000 {
+			#sound-dai-cells = <0>;
+			compatible = "microchip,sama7g5-spdifrx";
+			reg = <0xe1614000 0x4000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(49)>;
+			dma-names = "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 84>, <&pmc PMC_TYPE_GCK 84>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		spdiftx: spdiftx@e1618000 {
+			#sound-dai-cells = <0>;
+			compatible = "microchip,sama7g5-spdiftx";
+			reg = <0xe1618000 0x4000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(50)>;
+			dma-names = "tx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 85>, <&pmc PMC_TYPE_GCK 85>;
+			clock-names = "pclk", "gclk";
+		};
+
+		i2s0: i2s@e161c000 {
+			compatible = "microchip,sama7g5-i2smcc";
+			#sound-dai-cells = <0>;
+			reg = <0xe161c000 0x4000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>, <&dma0 AT91_XDMAC_DT_PERID(33)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		i2s1: i2s@e1620000 {
+			compatible = "microchip,sama7g5-i2smcc";
+			#sound-dai-cells = <0>;
+			reg = <0xe1620000 0x4000>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(36)>, <&dma0 AT91_XDMAC_DT_PERID(35)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		eic: interrupt-controller@e1628000 {
+			compatible = "microchip,sama7g5-eic";
+			reg = <0xe1628000 0xec>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+			clock-names = "pclk";
+			status = "disabled";
+		};
+
+		pit64b0: timer@e1800000 {
+			compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xe1800000 0x4000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 70>, <&pmc PMC_TYPE_GCK 70>;
+			clock-names = "pclk", "gclk";
+		};
+
+		pit64b1: timer@e1804000 {
+			compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xe1804000 0x4000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 71>, <&pmc PMC_TYPE_GCK 71>;
+			clock-names = "pclk", "gclk";
+		};
+
+		aes: crypto@e1810000 {
+			compatible = "atmel,at91sam9g46-aes";
+			reg = <0xe1810000 0x100>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
+			clock-names = "aes_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+			dma-names = "tx", "rx";
+		};
+
+		sha: crypto@e1814000 {
+			compatible = "atmel,at91sam9g46-sha";
+			reg = <0xe1814000 0x100>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 83>;
+			clock-names = "sha_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
+			dma-names = "tx";
+		};
+
+		flx0: flexcom@e1818000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe1818000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe1818000 0x800>;
+			status = "disabled";
+
+			uart0: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
+					<&dma1 AT91_XDMAC_DT_PERID(5)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+		};
+
+		flx1: flexcom@e181c000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe181c000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe181c000 0x800>;
+			status = "disabled";
+
+			i2c1: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
+					<&dma0 AT91_XDMAC_DT_PERID(7)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		flx3: flexcom@e1824000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe1824000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe1824000 0x800>;
+			status = "disabled";
+
+			uart3: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(12)>,
+					<&dma1 AT91_XDMAC_DT_PERID(11)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+		};
+
+		trng: rng@e2010000 {
+			compatible = "microchip,sama7g5-trng", "atmel,at91sam9g45-trng";
+			reg = <0xe2010000 0x100>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 97>;
+			status = "disabled";
+		};
+
+		tdes: crypto@e2014000 {
+			compatible = "atmel,at91sam9g46-tdes";
+			reg = <0xe2014000 0x100>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 96>;
+			clock-names = "tdes_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(53)>;
+			dma-names = "tx", "rx";
+		};
+
+		flx4: flexcom@e2018000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe2018000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2018000 0x800>;
+			status = "disabled";
+
+			uart4: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
+					<&dma1 AT91_XDMAC_DT_PERID(13)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx7: flexcom@e2024000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe2024000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2024000 0x800>;
+			status = "disabled";
+
+			uart7: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
+					<&dma1 AT91_XDMAC_DT_PERID(19)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		gmac0: ethernet@e2800000 {
+			compatible = "microchip,sama7g5-gem";
+			reg = <0xe2800000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_GCK 51>, <&pmc PMC_TYPE_GCK 53>;
+			clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 51>;
+			assigned-clock-rates = <125000000>;
+			status = "disabled";
+		};
+
+		gmac1: ethernet@e2804000 {
+			compatible = "microchip,sama7g5-emac";
+			reg = <0xe2804000 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 52>, <&pmc PMC_TYPE_PERIPHERAL 52>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		dma0: dma-controller@e2808000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe2808000 0x1000>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		dma1: dma-controller@e280c000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe280c000 0x1000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		/* Place dma2 here despite it's address */
+		dma2: dma-controller@e1200000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe1200000 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+			clock-names = "dma_clk";
+			dma-requests = <0>;
+			status = "disabled";
+		};
+
+		tcb0: timer@e2814000 {
+			compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe2814000 0x100>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 88>, <&pmc PMC_TYPE_PERIPHERAL 89>, <&pmc PMC_TYPE_PERIPHERAL 90>, <&clk32k 1>;
+			clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+		};
+
+		flx8: flexcom@e2818000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe2818000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2818000 0x800>;
+			status = "disabled";
+
+			i2c8: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
+					<&dma0 AT91_XDMAC_DT_PERID(21)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		flx9: flexcom@e281c000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe281c000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe281c000 0x800>;
+			status = "disabled";
+
+			i2c9: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
+					<&dma0 AT91_XDMAC_DT_PERID(23)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		flx11: flexcom@e2824000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe2824000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2824000 0x800>;
+			status = "disabled";
+
+			spi11: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(28)>,
+					    <&dma0 AT91_XDMAC_DT_PERID(27)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		uddrc: uddrc@e3800000 {
+			compatible = "microchip,sama7g5-uddrc";
+			reg = <0xe3800000 0x4000>;
+		};
+
+		ddr3phy: ddr3phy@e3804000 {
+			compatible = "microchip,sama7g5-ddr3phy";
+			reg = <0xe3804000 0x1000>;
+		};
+
+		otpc: efuse@e8c00000 {
+			compatible = "microchip,sama7g5-otpc", "syscon";
+			reg = <0xe8c00000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			temperature_calib: calib@1 {
+				reg = <OTP_PKT(1) 76>;
+			};
+		};
+
+		gic: interrupt-controller@e8c11000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0xe8c11000 0x1000>,
+				<0xe8c12000 0x2000>;
+		};
+	};
+};
diff --git a/src/arm/microchip/tny_a9260.dts b/src/arm/microchip/tny_a9260.dts
new file mode 100644
index 0000000..ef6d586
--- /dev/null
+++ b/src/arm/microchip/tny_a9260.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * tny_a9260.dts - Device Tree file for Caloa TNY A9260 board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+#include "tny_a9260_common.dtsi"
+
+/ {
+	model = "Calao TNY A9260";
+	compatible = "calao,tny-a9260", "atmel,at91sam9260", "atmel,at91sam9";
+};
diff --git a/src/arm/microchip/tny_a9260_common.dtsi b/src/arm/microchip/tny_a9260_common.dtsi
new file mode 100644
index 0000000..70e5635
--- /dev/null
+++ b/src/arm/microchip/tny_a9260_common.dtsi
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * tny_a9260_common.dtsi - Device Tree file for Caloa TNY A926x board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+/ {
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock6 rw rootfstype=ubifs";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@80000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@a0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4a0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7ca0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/tny_a9263.dts b/src/arm/microchip/tny_a9263.dts
new file mode 100644
index 0000000..62b7d9f
--- /dev/null
+++ b/src/arm/microchip/tny_a9263.dts
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9263.dtsi"
+
+/ {
+	model = "Calao TNY A9263";
+	compatible = "atmel,tny-a9263", "atmel,at91sam9263", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			tcb0: timer@fff7c000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usb1: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+		};
+
+		ebi0: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@80000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@a0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4a0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7ca0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+};
diff --git a/src/arm/microchip/tny_a9g20.dts b/src/arm/microchip/tny_a9g20.dts
new file mode 100644
index 0000000..118d766
--- /dev/null
+++ b/src/arm/microchip/tny_a9g20.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * tny_a9g20.dts - Device Tree file for Caloa TNY A9G20 board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+#include "tny_a9260_common.dtsi"
+
+/ {
+	model = "Calao TNY A9G20";
+	compatible = "calao,tny-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+};
diff --git a/src/arm/microchip/usb_a9260.dts b/src/arm/microchip/usb_a9260.dts
new file mode 100644
index 0000000..66f8da8
--- /dev/null
+++ b/src/arm/microchip/usb_a9260.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * usb_a9260.dts - Device Tree file for Caloa USB A9260 board
+ *
+ *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+#include "usb_a9260_common.dtsi"
+
+/ {
+	model = "Calao USB A9260";
+	compatible = "calao,usb-a9260", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	ahb {
+		apb {
+			shdwc: poweroff@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+		};
+	};
+};
diff --git a/src/arm/microchip/usb_a9260_common.dtsi b/src/arm/microchip/usb_a9260_common.dtsi
new file mode 100644
index 0000000..8744b5f
--- /dev/null
+++ b/src/arm/microchip/usb_a9260_common.dtsi
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * usb_a926x.dts - Device Tree file for Caloa USB A926x board
+ *
+ *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+/ {
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@80000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@a0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4a0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7ca0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led {
+			label = "user_led";
+			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user_pb {
+			label = "user_pb";
+			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
+			linux,code = <28>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+};
diff --git a/src/arm/microchip/usb_a9263.dts b/src/arm/microchip/usb_a9263.dts
new file mode 100644
index 0000000..4574591
--- /dev/null
+++ b/src/arm/microchip/usb_a9263.dts
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9263.dtsi"
+
+/ {
+	model = "Calao USB A9263";
+	compatible = "atmel,usb-a9263", "atmel,at91sam9263", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			tcb0: timer@fff7c000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			spi0: spi@fffa4000 {
+				cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+				flash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					reg = <0>;
+					spi-max-frequency = <15000000>;
+				};
+			};
+
+			poweroff@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+		};
+
+		ebi0: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@80000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@a0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4a0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7ca0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@a00000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led {
+			label = "user_led";
+			gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user_pb {
+			label = "user_pb";
+			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
+			linux,code = <28>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+};
diff --git a/src/arm/microchip/usb_a9g20-dab-mmx.dtsi b/src/arm/microchip/usb_a9g20-dab-mmx.dtsi
new file mode 100644
index 0000000..08d5808
--- /dev/null
+++ b/src/arm/microchip/usb_a9g20-dab-mmx.dtsi
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * calao-dab-mmx.dtsi - Device Tree Include file for Calao DAB-MMX Daughter Board
+ *
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+/ {
+	ahb {
+		apb {
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			usart3: serial@fffd0000 {
+				status = "okay";
+			};
+		};
+	};
+
+	i2c-gpio@0 {
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led1 {
+			label = "user_led1";
+			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
+		};
+
+/*
+* led already used by mother board but active as high
+*		user_led2 {
+*			label = "user_led2";
+*			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
+*		};
+*/
+		user_led3 {
+			label = "user_led3";
+			gpios = <&pioB 22 GPIO_ACTIVE_LOW>;
+		};
+
+		user_led4 {
+			label = "user_led4";
+			gpios = <&pioB 23 GPIO_ACTIVE_LOW>;
+		};
+
+		red {
+			label = "red";
+			gpios = <&pioB 24 GPIO_ACTIVE_LOW>;
+		};
+
+		orange {
+			label = "orange";
+			gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
+		};
+
+		green {
+			label = "green";
+			gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user_pb1 {
+			label = "user_pb1";
+			gpios = <&pioB 25 GPIO_ACTIVE_LOW>;
+			linux,code = <0x100>;
+		};
+
+		user_pb2 {
+			label = "user_pb2";
+			gpios = <&pioB 13 GPIO_ACTIVE_LOW>;
+			linux,code = <0x101>;
+		};
+
+		user_pb3 {
+			label = "user_pb3";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			linux,code = <0x102>;
+		};
+
+		user_pb4 {
+			label = "user_pb4";
+			gpios = <&pioC 9 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+		};
+	};
+};
diff --git a/src/arm/microchip/usb_a9g20.dts b/src/arm/microchip/usb_a9g20.dts
new file mode 100644
index 0000000..2f667b0
--- /dev/null
+++ b/src/arm/microchip/usb_a9g20.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board
+ *
+ *  Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "usb_a9g20_common.dtsi"
+
+/ {
+	model = "Calao USB A9G20";
+	compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+};
diff --git a/src/arm/microchip/usb_a9g20_common.dtsi b/src/arm/microchip/usb_a9g20_common.dtsi
new file mode 100644
index 0000000..7d10b36
--- /dev/null
+++ b/src/arm/microchip/usb_a9g20_common.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board
+ *
+ *  Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91sam9g20.dtsi"
+#include "usb_a9260_common.dtsi"
+
+/ {
+	chosen {
+		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	i2c-gpio-0 {
+		rtc@56 {
+			compatible = "microcrystal,rv3029";
+			reg = <0x56>;
+		};
+	};
+};
diff --git a/src/arm/microchip/usb_a9g20_lpw.dts b/src/arm/microchip/usb_a9g20_lpw.dts
new file mode 100644
index 0000000..f657120
--- /dev/null
+++ b/src/arm/microchip/usb_a9g20_lpw.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * usb_a9g20_lpw.dts - Device Tree file for Caloa USB A9G20 Low Power board
+ *
+ *  Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "usb_a9g20_common.dtsi"
+
+/ {
+	model = "Calao USB A9G20 Low Power";
+	compatible = "calao,usb-a9g20-lpw", "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	ahb {
+		apb {
+			spi1: spi@fffcc000 {
+				cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+				mmc-slot@0 {
+					compatible = "mmc-spi-slot";
+					reg = <0>;
+					voltage-ranges = <3200 3400>;
+					spi-max-frequency = <25000000>;
+					interrupt-parent = <&pioC>;
+					interrupts = <4 IRQ_TYPE_EDGE_BOTH>;
+				};
+			};
+		};
+	};
+};