Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/arm/microchip/pm9g45.dts b/src/arm/microchip/pm9g45.dts
new file mode 100644
index 0000000..c349fd3
--- /dev/null
+++ b/src/arm/microchip/pm9g45.dts
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * pm9g45.dts - Device Tree file for Ronetix pm9g45 board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9g45.dtsi"
+
+/ {
+ model = "Ronetix pm9g45";
+ compatible = "ronetix,pm9g45", "atmel,at91sam9g45", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory@70000000 {
+ reg = <0x70000000 0x8000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@ffffee00 {
+ status = "okay";
+ };
+
+ pinctrl@fffff200 {
+ nand {
+ pinctrl_nand_rb: nand-rb-0 {
+ atmel,pins =
+ <AT91_PIOD 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
+ };
+
+ mmc {
+ pinctrl_board_mmc: mmc0-board {
+ atmel,pins =
+ <AT91_PIOD 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD6 gpio CD pin pull_up and deglitch */
+ };
+ };
+ };
+
+ tcb0: timer@fff7c000 {
+ timer@0 {
+ compatible = "atmel,tcb-timer";
+ reg = <0>, <1>;
+ };
+
+ timer@2 {
+ compatible = "atmel,tcb-timer";
+ reg = <2>;
+ };
+ };
+
+ mmc0: mmc@fff80000 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc
+ &pinctrl_mmc0_slot0_clk_cmd_dat0
+ &pinctrl_mmc0_slot0_dat1_3>;
+ pinctrl-names = "default";
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 6 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ macb0: ethernet@fffbc000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+ };
+
+ ebi: ebi@10000000 {
+ status = "okay";
+
+ nand_controller: nand-controller {
+ status = "okay";
+ pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+ pinctrl-names = "default";
+
+ nand@3 {
+ reg = <0x3 0x0 0x800000>;
+ rb-gpios = <&pioD 3 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ label = "atmel_nand";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ barebox@20000 {
+ label = "barebox";
+ reg = <0x20000 0x40000>;
+ };
+
+ bareboxenv@60000 {
+ label = "bareboxenv";
+ reg = <0x60000 0x1A0000>;
+ };
+
+ kernel@200000 {
+ label = "bareboxenv2";
+ reg = <0x200000 0x300000>;
+ };
+
+ kernel@500000 {
+ label = "root";
+ reg = <0x500000 0x400000>;
+ };
+
+ data@900000 {
+ label = "data";
+ reg = <0x900000 0x8340000>;
+ };
+ };
+ };
+ };
+ };
+
+ usb0: ohci@700000 {
+ status = "okay";
+ num-ports = <2>;
+ };
+
+ usb1: ehci@800000 {
+ status = "okay";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led0 {
+ label = "led0";
+ gpios = <&pioD 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "nand-disk";
+ };
+
+ led1 {
+ label = "led1";
+ gpios = <&pioD 31 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ right {
+ label = "SW4";
+ gpios = <&pioE 7 GPIO_ACTIVE_LOW>;
+ linux,code = <106>;
+ };
+
+ up {
+ label = "SW3";
+ gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
+ linux,code = <103>;
+ };
+ };
+};