Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/arm/microchip/at91-nattis-2-natte-2.dts b/src/arm/microchip/at91-nattis-2-natte-2.dts
new file mode 100644
index 0000000..f71377c
--- /dev/null
+++ b/src/arm/microchip/at91-nattis-2-natte-2.dts
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * at91-nattis-2-natte-2.dts - Device Tree file for the Linea/Nattis board
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ */
+/dts-v1/;
+#include "at91-linea.dtsi"
+#include "at91-natte.dtsi"
+
+/ {
+ model = "Axentia Linea-Nattis v2 Natte v2";
+ compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea",
+ "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-wakeup {
+ label = "Wakeup";
+ linux,code = <10>;
+ wakeup-source;
+ gpios = <&pioB 27 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ panel_reg: panel-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "panel-VCC";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ bl_reg: backlight-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "panel-VDD";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ panel_bl: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&hlcdc_pwm 0 100000 0>;
+
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <40>;
+
+ power-supply = <&bl_reg>;
+ enable-gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_blon>;
+ };
+
+ panel: panel {
+ compatible = "sharp,lq150x1lg11", "panel-lvds";
+
+ backlight = <&panel_bl>;
+ power-supply = <&panel_reg>;
+
+ width-mm = <304>;
+ height-mm = <228>;
+
+ data-mapping = "jeida-18";
+
+ panel-timing {
+ // 1024x768 @ 60Hz (typical)
+ clock-frequency = <50000000 65000000 80000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hfront-porch = <48 88 88>;
+ hback-porch = <96 168 168>;
+ hsync-len = <32 64 64>;
+ vsync-len = <3 13 74>;
+ vfront-porch = <3 13 74>;
+ vback-porch = <3 12 74>;
+ };
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&lvds_encoder_output>;
+ };
+ };
+ };
+
+ lvds-encoder {
+ compatible = "ti,ds90c185", "lvds-encoder";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lvds_prlud0 &pinctrl_lvds_hipow0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lvds_encoder_input: endpoint {
+ remote-endpoint = <&hlcdc_output>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lvds_encoder_output: endpoint {
+ remote-endpoint = <&panel_input>;
+ };
+ };
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,name = "nattis-tfa9879";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&cpu_dai>;
+ simple-audio-card,frame-master = <&cpu_dai>;
+ simple-audio-card,widgets = "Line", "Line Out Jack";
+ simple-audio-card,routing = "Line Out Jack", "LINEOUT";
+
+ cpu_dai: simple-audio-card,cpu {
+ sound-dai = <&ssc0>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&>;
+ };
+ };
+};
+
+&pinctrl {
+ nattis {
+ pinctrl_usba_vbus: usba_vbus {
+ atmel,pins = <AT91_PIOD 28 AT91_PERIPH_GPIO
+ AT91_PINCTRL_DEGLITCH>;
+ };
+
+ pinctrl_mmc0_cd: mmc0_cd {
+ atmel,pins = <AT91_PIOD 5 AT91_PERIPH_GPIO
+ AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+
+ pinctrl_lvds_prlud0: lvds_prlud0 {
+ atmel,pins = <AT91_PIOA 21 AT91_PERIPH_GPIO
+ (AT91_PINCTRL_OUTPUT |
+ AT91_PINCTRL_OUTPUT_VAL(0))>;
+ };
+
+ pinctrl_lvds_hipow0: lvds_hipow0 {
+ atmel,pins = <AT91_PIOA 23 AT91_PERIPH_GPIO
+ (AT91_PINCTRL_OUTPUT |
+ AT91_PINCTRL_OUTPUT_VAL(0))>;
+ };
+
+ pinctrl_blon: blon {
+ atmel,pins = <AT91_PIOA 20 AT91_PERIPH_GPIO
+ (AT91_PINCTRL_OUTPUT |
+ AT91_PINCTRL_OUTPUT_VAL(0))>;
+ };
+ };
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ clock-frequency = <100000>;
+
+ temp@18 {
+ compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+ reg = <0x18>;
+ smbus-timeout-disable;
+ };
+
+ eeprom@50 {
+ compatible = "nxp,se97b", "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ amp: amplifier@6c {
+ compatible = "nxp,tfa9879";
+ reg = <0x6c>;
+ #sound-dai-cells = <0>;
+ };
+};
+
+&ssc0 {
+ status = "okay";
+
+ atmel,clk-from-rk-pin;
+ #sound-dai-cells = <0>;
+};
+
+&hlcdc {
+ status = "okay";
+
+ hlcdc-display-controller {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
+
+ port@0 {
+ hlcdc_output: endpoint {
+ remote-endpoint = <&lvds_encoder_input>;
+ bus-width = <16>;
+ };
+ };
+ };
+};
+
+&mmc0 {
+ status = "okay";
+
+ pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0
+ &pinctrl_mmc0_dat1_3
+ &pinctrl_mmc0_cd>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+ };
+};
+
+&usart0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart0>;
+ atmel,use-dma-rx;
+};
+
+&nand {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ barebox@40000 {
+ label = "barebox";
+ reg = <0x40000 0x60000>;
+ };
+
+ bareboxenv@c0000 {
+ label = "bareboxenv";
+ reg = <0xc0000 0x40000>;
+ };
+
+ bareboxenv2@100000 {
+ label = "bareboxenv2";
+ reg = <0x100000 0x40000>;
+ };
+
+ oftree@180000 {
+ label = "oftree";
+ reg = <0x180000 0x20000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x500000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x1f800000>;
+ };
+ };
+};
+
+&dbgu {
+ status = "okay";
+
+ atmel,use-dma-rx;
+};
+
+&usb0 {
+ status = "okay";
+
+ atmel,vbus-gpio = <&pioD 28 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usba_vbus>;
+};