Squashed 'dts/upstream/' content from commit aaba2d45dc2a

git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/arm/marvell/orion5x-netgear-wnr854t.dts b/src/arm/marvell/orion5x-netgear-wnr854t.dts
new file mode 100644
index 0000000..fb203e7
--- /dev/null
+++ b/src/arm/marvell/orion5x-netgear-wnr854t.dts
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "orion5x-mv88f5181.dtsi"
+
+/ {
+	model = "Netgear WNR854-t";
+	compatible = "netgear,wnr854t", "marvell,orion5x-88f5181",
+		     "marvell,orion5x";
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x2000000>; /* 32 MB */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x800000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_reset_button>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_power_led &pmx_power_led_blink &pmx_wan_led>;
+		pinctrl-names = "default";
+
+		led@0 {
+			label = "wnr854t:green:power";
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led@1 {
+			label = "wnr854t:blink:power";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led@2 {
+			label = "wnr854t:green:wan";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	devbus,keep-config;
+
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x800000>;
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x0 0x100000>;
+			};
+
+			partition@100000 {
+				label = "rootfs";
+				reg = <0x100000 0x660000>;
+			};
+
+			partition@760000 {
+				label = "uboot_env";
+				reg = <0x760000 0x20000>;
+			};
+
+			partition@780000 {
+				label = "uboot";
+				reg = <0x780000 0x80000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	switch: switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		dsa,member = <0 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan3";
+				phy-handle = <&lan3phy>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan4";
+				phy-handle = <&lan4phy>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "wan";
+				phy-handle = <&wanphy>;
+			};
+
+			port@3 {
+				reg = <3>;
+				ethernet = <&ethport>;
+				phy-mode = "rgmii-id";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "lan1";
+				phy-handle = <&lan1phy>;
+			};
+
+			port@7 {
+				reg = <7>;
+				label = "lan2";
+				phy-handle = <&lan2phy>;
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lan3phy: ethernet-phy@0 {
+				/* Marvell 88E1121R (port 1) */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <0>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+
+			lan4phy: ethernet-phy@1 {
+				/* Marvell 88E1121R (port 2) */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <1>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+
+			wanphy: ethernet-phy@2 {
+				/* Marvell 88E1121R (port 1) */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <2>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+
+			lan1phy: ethernet-phy@5 {
+				/* Marvell 88E1112 */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <5>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+
+			lan2phy: ethernet-phy@7 {
+				/* Marvell 88E1112 */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <7>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+		};
+	};
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		/* Hardwired to DSA switch */
+		speed = <1000>;
+		duplex = <1>;
+		phy-mode = "rgmii";
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_pci_gpios>;
+	pinctrl-names = "default";
+
+	pmx_power_led: pmx-power-led {
+		marvell,pins = "mpp0";
+		marvell,function = "gpio";
+	};
+
+	pmx_reset_button: pmx-reset-button {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_led_blink: pmx-power-led-blink {
+		marvell,pins = "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_wan_led: pmx-wan-led {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_pci_gpios: pmx-pci-gpios {
+		marvell,pins = "mpp4";
+		marvell,function = "gpio";
+	};
+};
+
+&uart0 {
+	/* Pin 1: Tx, Pin 7: Rx, Pin 8: Gnd */
+	status = "okay";
+};