Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/arm/marvell/kirkwood-ts419.dtsi b/src/arm/marvell/kirkwood-ts419.dtsi
new file mode 100644
index 0000000..7172368
--- /dev/null
+++ b/src/arm/marvell/kirkwood-ts419.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree include file for QNAP TS41X
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ */
+
+/ {
+ model = "QNAP TS419 family";
+ compatible = "qnap,ts419", "marvell,kirkwood";
+
+ ocp@f1000000 {
+ pinctrl: pin-controller@10000 {
+ pinctrl-names = "default";
+
+ pmx_USB_copy_button: pmx-USB-copy-button {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+ pmx_reset_button: pmx-reset-button {
+ marvell,pins = "mpp37";
+ marvell,function = "gpio";
+ };
+ /*
+ * JP1 indicates if an LCD module is installed
+ * on the serial port (0), or if the port is used
+ * as a console (1).
+ */
+ pmx_jumper_jp1: pmx-jumper_jp1 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
+ pinctrl-names = "default";
+
+ copy {
+ label = "USB Copy";
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+ reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy1: ethernet-phy@1 {
+ device_type = "ethernet-phy";
+ /* overwrite reg property in board file */
+ };
+};
+
+ð1 {
+ status = "okay";
+ ethernet1-port@0 {
+ phy-handle = <ðphy1>;
+ };
+};