Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/arm/intel/axm/axm5516-amarillo.dts b/src/arm/intel/axm/axm5516-amarillo.dts
new file mode 100644
index 0000000..2e2ad3c
--- /dev/null
+++ b/src/arm/intel/axm/axm5516-amarillo.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/arm/boot/dts/axm5516-amarillo.dts
+ *
+ * Copyright (C) 2013 LSI
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x00000000 0x00400000;
+
+#include "axm55xx.dtsi"
+#include "axm5516-cpus.dtsi"
+
+/ {
+ model = "Amarillo AXM5516";
+ compatible = "lsi,axm5516-amarillo", "lsi,axm5516";
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x00000000 0x02 0x00000000>;
+ };
+};
+
+&serial0 {
+ status = "okay";
+};
+
+&serial1 {
+ status = "okay";
+};
+
+&serial2 {
+ status = "okay";
+};
+
+&serial3 {
+ status = "okay";
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
diff --git a/src/arm/intel/axm/axm5516-cpus.dtsi b/src/arm/intel/axm/axm5516-cpus.dtsi
new file mode 100644
index 0000000..f13ef80
--- /dev/null
+++ b/src/arm/intel/axm/axm5516-cpus.dtsi
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/arm/boot/dts/axm5516-cpus.dtsi
+ *
+ * Copyright (C) 2013 LSI
+ */
+
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ core2 {
+ cpu = <&CPU2>;
+ };
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&CPU4>;
+ };
+ core1 {
+ cpu = <&CPU5>;
+ };
+ core2 {
+ cpu = <&CPU6>;
+ };
+ core3 {
+ cpu = <&CPU7>;
+ };
+ };
+ cluster2 {
+ core0 {
+ cpu = <&CPU8>;
+ };
+ core1 {
+ cpu = <&CPU9>;
+ };
+ core2 {
+ cpu = <&CPU10>;
+ };
+ core3 {
+ cpu = <&CPU11>;
+ };
+ };
+ cluster3 {
+ core0 {
+ cpu = <&CPU12>;
+ };
+ core1 {
+ cpu = <&CPU13>;
+ };
+ core2 {
+ cpu = <&CPU14>;
+ };
+ core3 {
+ cpu = <&CPU15>;
+ };
+ };
+ };
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x00>;
+ clock-frequency = <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x01>;
+ clock-frequency = <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x02>;
+ clock-frequency = <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x03>;
+ clock-frequency = <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU4: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x100>;
+ clock-frequency = <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU5: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x101>;
+ clock-frequency = <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU6: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x102>;
+ clock-frequency = <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU7: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x103>;
+ clock-frequency = <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU8: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x200>;
+ clock-frequency = <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU9: cpu@201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x201>;
+ clock-frequency = <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU10: cpu@202 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x202>;
+ clock-frequency = <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU11: cpu@203 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x203>;
+ clock-frequency = <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU12: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x300>;
+ clock-frequency = <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU13: cpu@301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x301>;
+ clock-frequency = <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU14: cpu@302 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x302>;
+ clock-frequency = <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+
+ CPU15: cpu@303 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x303>;
+ clock-frequency = <1400000000>;
+ cpu-release-addr = <0>; // Fixed by the boot loader
+ };
+ };
+};
diff --git a/src/arm/intel/axm/axm55xx.dtsi b/src/arm/intel/axm/axm55xx.dtsi
new file mode 100644
index 0000000..5277890
--- /dev/null
+++ b/src/arm/intel/axm/axm55xx.dtsi
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/arm/boot/dts/axm55xx.dtsi
+ *
+ * Copyright (C) 2013 LSI
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/lsi,axm5516-clks.h>
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ timer = &timer0;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clk_ref0: clk_ref0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ clk_ref1: clk_ref1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ clk_ref2: clk_ref2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ clks: clock-controller@2010020000 {
+ compatible = "lsi,axm5516-clks";
+ #clock-cells = <1>;
+ reg = <0x20 0x10020000 0 0x20000>;
+ };
+ };
+
+ gic: interrupt-controller@2001001000 {
+ compatible = "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x20 0x01001000 0 0x1000>,
+ <0x20 0x01002000 0 0x2000>,
+ <0x20 0x01004000 0 0x2000>,
+ <0x20 0x01006000 0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts =
+ <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+
+ pmu {
+ compatible = "arm,cortex-a15-pmu";
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ device_type = "soc";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic>;
+ ranges;
+
+ syscon: syscon@2010030000 {
+ compatible = "lsi,axxia-syscon", "syscon";
+ reg = <0x20 0x10030000 0 0x2000>;
+ };
+
+ reset: reset@2010031000 {
+ compatible = "lsi,axm55xx-reset";
+ syscon = <&syscon>;
+ };
+
+ amba {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ serial0: serial@2010080000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x20 0x10080000 0 0x1000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks AXXIA_CLK_PER>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ serial1: serial@2010081000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x20 0x10081000 0 0x1000>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks AXXIA_CLK_PER>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ serial2: serial@2010082000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x20 0x10082000 0 0x1000>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks AXXIA_CLK_PER>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ serial3: serial@2010083000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x20 0x10083000 0 0x1000>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks AXXIA_CLK_PER>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ timer0: timer@2010091000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x20 0x10091000 0 0x1000>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks AXXIA_CLK_PER>;
+ clock-names = "apb_pclk";
+ status = "okay";
+ };
+
+ gpio0: gpio@2010092000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x20 0x10092000 0x00 0x1000>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks AXXIA_CLK_PER>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio1: gpio@2010093000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0x20 0x10093000 0x00 0x1000>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks AXXIA_CLK_PER>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+ };
+ };
+};
+
+/*
+ Local Variables:
+ mode: C
+ End:
+*/
diff --git a/src/arm/intel/ixp/intel-ixp42x-adi-coyote.dts b/src/arm/intel/ixp/intel-ixp42x-adi-coyote.dts
new file mode 100644
index 0000000..765ab36
--- /dev/null
+++ b/src/arm/intel/ixp/intel-ixp42x-adi-coyote.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for ADI Engineering Coyote platform.
+ * Derived from boardfiles written by MontaVista software.
+ * Ethernet set-up from OpenWrt.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "ADI Engineering Coyote reference design";
+ compatible = "adieng,coyote", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ /* CHECKME: 16 MB SDRAM minimum, maybe the Coyote actually has more */
+ device_type = "memory";
+ reg = <0x00000000 0x01000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+ stdout-path = "uart1:115200n8";
+ };
+
+ aliases {
+ /* These are switched around */
+ serial0 = &uart1;
+ serial1 = &uart0;
+ };
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /*
+ * 32 MB of Flash in 128 0x20000 sized blocks
+ * mapped in at CS0 and CS1
+ */
+ reg = <0 0x00000000 0x2000000>;
+
+ /* Configure expansion bus to allow writes */
+ intel,ixp4xx-eb-write-enable = <1>;
+
+ partitions {
+ compatible = "redboot-fis";
+ /* CHECKME: guess this is Redboot FIS */
+ fis-index-block = <0x1ff>;
+ };
+ };
+ };
+
+ pci@c0000000 {
+ status = "okay";
+
+ /*
+ * Taken from Coyote PCI boardfile.
+ * We have slots (IDSEL) 1 and 2 with one assigned IRQ
+ * each handling all IRQs.
+ */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ /* IDSEL 1 */
+ <0x0800 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 6 */
+ <0x0800 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 6 */
+ <0x0800 0 0 3 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 6 */
+ <0x0800 0 0 4 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 6 */
+ /* IDSEL 2 */
+ <0x1000 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 11 */
+ <0x1000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 11 */
+ <0x1000 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 11 */
+ <0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 11 */
+ };
+
+ /* EthB */
+ ethernet@c8009000 {
+ status = "okay";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ };
+ };
+ };
+
+ /* EthC */
+ ethernet@c800a000 {
+ status = "okay";
+ queue-rx = <&qmgr 4>;
+ queue-txready = <&qmgr 21>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy4>;
+ };
+ };
+};
diff --git a/src/arm/intel/ixp/intel-ixp42x-arcom-vulcan.dts b/src/arm/intel/ixp/intel-ixp42x-arcom-vulcan.dts
new file mode 100644
index 0000000..6f5b4e4
--- /dev/null
+++ b/src/arm/intel/ixp/intel-ixp42x-arcom-vulcan.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Arcom/Eurotech Vulcan board.
+ * This board is a single board computer in the PC/104 form factor based on
+ * IXP425, and was released around 2005. It previously had the name "Mercury".
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Arcom/Eurotech Vulcan";
+ compatible = "arcom,vulcan", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x4000000>;
+ };
+
+ chosen {
+ /* CHECKME: using a harddrive at /dev/sda1 as rootfs by default */
+ bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootfstype=ext4 rootwait";
+ stdout-path = "uart0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ onewire {
+ compatible = "w1-gpio";
+ gpios = <&gpio0 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ };
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /*
+ * 32 MB of Flash in 0x20000 byte blocks
+ * mapped in at CS0 and CS1.
+ *
+ * The documentation mentions the existence
+ * of a 16MB version, which we conveniently
+ * ignore. Shout if you own one!
+ */
+ reg = <0 0x00000000 0x2000000>;
+
+ /* Expansion bus settings */
+ intel,ixp4xx-eb-t3 = <3>;
+ intel,ixp4xx-eb-byte-access-on-halfword = <1>;
+ intel,ixp4xx-eb-write-enable = <1>;
+
+ partitions {
+ compatible = "redboot-fis";
+ fis-index-block = <0x1ff>;
+ };
+ };
+ sram@2,0 {
+ /* 256 KB SDRAM memory at CS2 */
+ compatible = "shared-dma-pool";
+ device_type = "memory";
+ reg = <2 0x00000000 0x40000>;
+ no-map;
+ /* Expansion bus settings */
+ intel,ixp4xx-eb-t3 = <1>;
+ intel,ixp4xx-eb-t4 = <2>;
+ intel,ixp4xx-eb-ahb-split-transfers = <1>;
+ intel,ixp4xx-eb-write-enable = <1>;
+ intel,ixp4xx-eb-byte-access = <1>;
+ };
+ serial@3,0 {
+ /*
+ * 8250-compatible Exar XR16L2551 2 x UART
+ *
+ * CHECKME: if special tweaks are needed, then fix the
+ * operating system to handle it.
+ */
+ compatible = "exar,xr16l2551", "ns8250";
+ reg = <3 0x00000000 0x10>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ clock-frequency = <1843200>;
+ /* Expansion bus settings */
+ intel,ixp4xx-eb-t3 = <3>;
+ intel,ixp4xx-eb-cycle-type = <1>; /* Motorola cycles */
+ intel,ixp4xx-eb-write-enable = <1>;
+ intel,ixp4xx-eb-byte-access = <1>;
+ };
+ gpio1: gpio@4,0 {
+ /*
+ * MMIO GPIO in one byte
+ */
+ compatible = "arcom,vulcan-gpio";
+ reg = <4 0x00000000 0x1>;
+ /* Expansion bus settings */
+ intel,ixp4xx-eb-write-enable = <1>;
+ intel,ixp4xx-eb-byte-access = <1>;
+ };
+ watchdog@5,0 {
+ compatible = "maxim,max6369";
+ reg = <5 0x00000000 0x1>;
+ /* Expansion bus settings */
+ intel,ixp4xx-eb-write-enable = <1>;
+ intel,ixp4xx-eb-byte-access = <1>;
+ };
+ };
+
+ pci@c0000000 {
+ status = "okay";
+
+ /*
+ * Taken from Vulcan PCI boardfile.
+ *
+ * We have 2 slots (IDSEL) 1 and 2 with one dedicated interrupt
+ * per slot. This interrupt is shared (OR:ed) by all four pins.
+ */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ /* IDSEL 1 */
+ <0x0800 0 0 1 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 2 */
+ <0x0800 0 0 2 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 2 */
+ <0x0800 0 0 3 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 2 */
+ <0x0800 0 0 4 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 2 */
+ /* IDSEL 2 */
+ <0x1000 0 0 1 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 3 */
+ <0x1000 0 0 2 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 3 */
+ <0x1000 0 0 3 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 3 */
+ <0x1000 0 0 4 &gpio0 3 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 3 */
+ };
+
+ /* EthB */
+ ethernet@c8009000 {
+ status = "okay";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ /* EthC */
+ ethernet@c800a000 {
+ status = "okay";
+ queue-rx = <&qmgr 4>;
+ queue-txready = <&qmgr 21>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ };
+ };
+};
diff --git a/src/arm/intel/ixp/intel-ixp42x-dlink-dsm-g600.dts b/src/arm/intel/ixp/intel-ixp42x-dlink-dsm-g600.dts
new file mode 100644
index 0000000..fa133c9
--- /dev/null
+++ b/src/arm/intel/ixp/intel-ixp42x-dlink-dsm-g600.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for D-Link DSM-G600 revision A based on IXP420
+ * NOTE: revision B of this device uses PowerPC and is NOT supported by
+ * this device tree.
+ *
+ * Inspired by the boardfile by Rod Whitby, Tower Technologies, Alessandro Zummo
+ * and Michael Westerhof.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "D-Link DSM-G600 rev A";
+ compatible = "dlink,dsm-g600-a", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ /* 64 MB SDRAM */
+ device_type = "memory";
+ reg = <0x00000000 0x4000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+ stdout-path = "uart0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-power {
+ label = "dsmg600:green:power";
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ led-wlan {
+ label = "dsmg600:green:wlan";
+ /* CHECKME: flagged as active low in the old board file */
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ /* We don't have WLAN trigger in the kernel (yet) */
+ linux,default-trigger = "netdev";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ button-reset {
+ wakeup-source;
+ linux,code = <KEY_RESTART>;
+ label = "reset";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_keys_polled {
+ compatible = "gpio-keys-polled";
+
+ /*
+ * According to the board file this key cannot handle interrupts and
+ * need to be polled. Investigate if this is really the case or if
+ * this can be moved adjacent to the ordinary gpio-keys above.
+ */
+ button-power {
+ wakeup-source;
+ linux,code = <KEY_POWER>;
+ label = "power";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ i2c {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio0 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ timeout-ms = <5000>;
+ };
+
+ soc {
+ bus@c4000000 {
+ /* The first 16MB region at CS0 on the expansion bus */
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /*
+ * 16 MB of Flash in 128 0x20000 sized blocks
+ * mapped in at CS0.
+ */
+ reg = <0 0x00000000 0x1000000>;
+
+ partitions {
+ compatible = "redboot-fis";
+ /*
+ * A boot log says the directory is at 0xfe0000
+ * 0x7f * 0x20000 = 0xfe0000
+ */
+ fis-index-block = <0x7f>;
+ };
+ };
+ };
+
+ pci@c0000000 {
+ status = "okay";
+
+ /*
+ * Taken from DSM-G600 PCI boardfile (dsmg600-pci.c)
+ * We have slots (IDSEL) 1, 2, 3, 4 and pins 1, 2 and 3.
+ * Only slot 3 have three IRQs.
+ */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ /* IDSEL 1 */
+ <0x0800 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT E on slot 1 is irq 7 */
+ /* IDSEL 2 */
+ <0x1000 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 11 */
+ /* IDSEL 3 */
+ <0x1800 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 10 */
+ <0x1800 0 0 2 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 9 */
+ <0x1800 0 0 3 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 8 */
+ /* IDSEL 4 */
+ <0x2000 0 0 3 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT F on slot 4 is irq 6 */
+ };
+ };
+};
diff --git a/src/arm/intel/ixp/intel-ixp42x-freecom-fsg-3.dts b/src/arm/intel/ixp/intel-ixp42x-freecom-fsg-3.dts
new file mode 100644
index 0000000..73d3c11
--- /dev/null
+++ b/src/arm/intel/ixp/intel-ixp42x-freecom-fsg-3.dts
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Freecom FSG-3 router.
+ * This machine is based on IXP425.
+ * This device tree is inspired by the board file by Rod Whitby.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Freecom FSG-3";
+ compatible = "freecom,fsg-3", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ /* 64 MB memory */
+ device_type = "memory";
+ reg = <0x00000000 0x4000000>;
+ };
+
+ chosen {
+ /* Boot from the first partition on the hard drive */
+ bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootfstype=ext4 rootwait";
+ stdout-path = "uart0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ button-sync {
+ wakeup-source;
+ /* Closest approximation of what the key should do */
+ linux,code = <KEY_CONNECT>;
+ label = "sync";
+ gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ };
+ button-reset {
+ wakeup-source;
+ linux,code = <KEY_RESTART>;
+ label = "reset";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ };
+ button-usb {
+ wakeup-source;
+ /* Unplug USB, closest approximation of what the key should do */
+ linux,code = <KEY_EJECTCD>;
+ label = "usb";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ i2c {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio0 12 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio0 13 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hwmon@28 {
+ /*
+ * Temperature sensor and fan control chip.
+ *
+ * TODO: create a proper device tree binding for
+ * the sensor and temperature zone and create a
+ * zone with fan control.
+ */
+ compatible = "winbond,w83781d";
+ reg = <0x28>;
+ };
+ rtc@6f {
+ compatible = "isil,isl1208";
+ reg = <0x6f>;
+ };
+ };
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /* Enable writes on the expansion bus */
+ intel,ixp4xx-eb-write-enable = <1>;
+ /* 4 MB of Flash mapped in at CS0 */
+ reg = <0 0x00000000 0x400000>;
+
+ partitions {
+ compatible = "redboot-fis";
+ /* Eraseblock at 0x3e0000 */
+ fis-index-block = <0x1f>;
+ };
+ };
+
+ /* Small syscon with some LEDs at CS2 */
+ syscon@2,0 {
+ compatible = "freecom,fsg-cs2-system-controller", "syscon";
+ reg = <2 0x0 0x200>;
+ reg-io-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <2 0x0 0x0 0x200>;
+
+ led@0,0 {
+ compatible = "register-bit-led";
+ reg = <0x00 0x02>;
+ mask = <0x01>;
+ label = "fsg:blue:wlan";
+ linux,default-trigger = "wlan";
+ default-state = "on";
+ };
+ led@0,1 {
+ compatible = "register-bit-led";
+ reg = <0x00 0x02>;
+ mask = <0x02>;
+ label = "fsg:blue:wan";
+ linux,default-trigger = "";
+ default-state = "on";
+ };
+ led@0,2 {
+ compatible = "register-bit-led";
+ reg = <0x00 0x02>;
+ mask = <0x04>;
+ label = "fsg:blue:sata";
+ linux,default-trigger = "";
+ default-state = "on";
+ };
+ led@0,3 {
+ compatible = "register-bit-led";
+ reg = <0x00 0x02>;
+ mask = <0x04>;
+ label = "fsg:blue:usb";
+ linux,default-trigger = "";
+ default-state = "on";
+ };
+ led@0,4 {
+ compatible = "register-bit-led";
+ reg = <0x00 0x02>;
+ mask = <0x08>;
+ label = "fsg:blue:sync";
+ linux,default-trigger = "";
+ default-state = "on";
+ };
+ led@0,5 {
+ compatible = "register-bit-led";
+ reg = <0x00 0x02>;
+ mask = <0x10>;
+ label = "fsg:blue:ring";
+ linux,default-trigger = "";
+ default-state = "on";
+ };
+ };
+ };
+
+ pci@c0000000 {
+ status = "okay";
+
+ /*
+ * Written based on the FSG-3 PCI boardfile.
+ * We have slots 12, 13 & 14 (IDSEL) with one IRQ each.
+ */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ /* IDSEL 12 */
+ <0x6000 0 0 1 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 5 */
+ <0x6000 0 0 2 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 12 is irq 5 */
+ <0x6000 0 0 3 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 12 is irq 5 */
+ <0x6000 0 0 4 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 12 is irq 5 */
+ /* IDSEL 13 */
+ <0x6800 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 7 */
+ <0x6800 0 0 2 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 7 */
+ <0x6800 0 0 3 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 13 is irq 7 */
+ <0x6800 0 0 4 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 13 is irq 7 */
+ /* IDSEL 14 */
+ <0x7000 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 6 */
+ <0x7000 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 6 */
+ <0x7000 0 0 3 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 14 is irq 6 */
+ <0x7000 0 0 4 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 14 is irq 6 */
+ };
+
+ /* EthB */
+ ethernet@c8009000 {
+ status = "okay";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ };
+ };
+ };
+
+ /* EthC */
+ ethernet@c800a000 {
+ status = "okay";
+ queue-rx = <&qmgr 4>;
+ queue-txready = <&qmgr 21>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy4>;
+ };
+ };
+};
diff --git a/src/arm/intel/ixp/intel-ixp42x-gateway-7001.dts b/src/arm/intel/ixp/intel-ixp42x-gateway-7001.dts
new file mode 100644
index 0000000..4d70f6a
--- /dev/null
+++ b/src/arm/intel/ixp/intel-ixp42x-gateway-7001.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Gateway 7001 AP based on IXP422
+ * Derived from boardfiles written by Imre Kaloz
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Gateway 7001 AP";
+ compatible = "gateway,7001", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ /* 32 MB SDRAM */
+ device_type = "memory";
+ reg = <0x00000000 0x2000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = "uart1:115200n8";
+ };
+
+ aliases {
+ /* second UART is the primary console */
+ serial0 = &uart1;
+ };
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /*
+ * 8 MB of flash
+ */
+ reg = <0 0x00000000 0x800000>;
+
+ /* Configure expansion bus to allow writes */
+ intel,ixp4xx-eb-write-enable = <1>;
+
+ partitions {
+ compatible = "redboot-fis";
+ /* Eraseblock at 0x7e0000 */
+ fis-index-block = <0x3f>;
+ };
+ };
+ };
+
+ pci@c0000000 {
+ status = "okay";
+
+ /*
+ * Taken from Gateway 7001 PCI boardfile (gateway7001-pci.c)
+ * We have slots (IDSEL) 1 and 2 with one assigned IRQ
+ * each handling all IRQs.
+ */
+ interrupt-map =
+ /* IDSEL 1 */
+ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+ <0x0800 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 11 */
+ <0x0800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 11 */
+ <0x0800 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 11 */
+ /* IDSEL 2 */
+ <0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+ <0x1000 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 10 */
+ <0x1000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 10 */
+ <0x1000 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 10 */
+ };
+
+ ethernet@c8009000 {
+ status = "okay";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ ethernet@c800a000 {
+ status = "okay";
+ queue-rx = <&qmgr 4>;
+ queue-txready = <&qmgr 21>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy2>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+ };
+ };
+ };
+};
diff --git a/src/arm/intel/ixp/intel-ixp42x-gateworks-gw2348.dts b/src/arm/intel/ixp/intel-ixp42x-gateworks-gw2348.dts
new file mode 100644
index 0000000..97e3f25
--- /dev/null
+++ b/src/arm/intel/ixp/intel-ixp42x-gateworks-gw2348.dts
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Gateworks Avila GW2348 board.
+ * This machine is based on IXP425.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Gateworks Avila GW2348";
+ compatible = "gateworks,gw2348", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x4000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = "uart0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-user {
+ label = "gw2348:green:user";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ i2c {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hwmon@28 {
+ compatible = "adi,ad7418";
+ reg = <0x28>;
+ };
+ rtc: ds1672@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
+ eeprom@51 {
+ compatible = "atmel,24c08";
+ reg = <0x51>;
+ pagesize = <16>;
+ size = <1024>;
+ read-only;
+ };
+ };
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /* Enable writes on the expansion bus */
+ intel,ixp4xx-eb-write-enable = <1>;
+ /* 16 MB of Flash mapped in at CS0 */
+ reg = <0 0x00000000 0x1000000>;
+
+ partitions {
+ compatible = "redboot-fis";
+ /* Eraseblock at 0x0fe0000 */
+ fis-index-block = <0x7f>;
+ };
+ };
+ ide@1,0 {
+ compatible = "intel,ixp4xx-compact-flash";
+ /*
+ * Set up expansion bus config to a really slow timing.
+ * The CF driver will dynamically reconfigure these timings
+ * depending on selected PIO mode (0-4).
+ */
+ intel,ixp4xx-eb-t1 = <3>; // 3 cycles extra address phase
+ intel,ixp4xx-eb-t2 = <3>; // 3 cycles extra setup phase
+ intel,ixp4xx-eb-t3 = <15>; // 15 cycles extra strobe phase
+ intel,ixp4xx-eb-t4 = <3>; // 3 cycles extra hold phase
+ intel,ixp4xx-eb-t5 = <15>; // 15 cycles extra recovery phase
+ intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle type
+ intel,ixp4xx-eb-byte-access-on-halfword = <1>;
+ intel,ixp4xx-eb-mux-address-and-data = <0>;
+ intel,ixp4xx-eb-ahb-split-transfers = <0>;
+ intel,ixp4xx-eb-write-enable = <1>;
+ intel,ixp4xx-eb-byte-access = <1>;
+ /* First register set is CMD second is CTL (notice it uses CS2) */
+ reg = <1 0x00000000 0x1000000>, <2 0x00000000 0x1000000>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+ };
+ /*
+ * FIXME: Latch LEDs or extra UARTs at CS4
+ */
+ };
+
+ pci@c0000000 {
+ status = "okay";
+
+ /*
+ * Taken from Avila PCI boardfile.
+ *
+ * We have up to 4 slots (IDSEL) with 4 swizzled IRQs.
+ */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ /* IDSEL 1 */
+ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+ <0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
+ <0x0800 0 0 3 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
+ <0x0800 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+ /* IDSEL 2 */
+ <0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+ <0x1000 0 0 2 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+ <0x1000 0 0 3 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 8 */
+ <0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 11 */
+ /* IDSEL 3 */
+ <0x1800 0 0 1 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+ <0x1800 0 0 2 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
+ <0x1800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 11 */
+ <0x1800 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 10 */
+ /* IDSEL 4 */
+ <0x2000 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 4 is irq 8 */
+ <0x2000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 4 is irq 11 */
+ <0x2000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 4 is irq 10 */
+ <0x2000 0 0 4 &gpio0 9 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 4 is irq 9 */
+ };
+
+ /* EthB */
+ ethernet@c8009000 {
+ status = "okay";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ /* EthC */
+ ethernet@c800a000 {
+ status = "okay";
+ queue-rx = <&qmgr 4>;
+ queue-txready = <&qmgr 21>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ };
+ };
+};
diff --git a/src/arm/intel/ixp/intel-ixp42x-goramo-multilink.dts b/src/arm/intel/ixp/intel-ixp42x-goramo-multilink.dts
new file mode 100644
index 0000000..9ec0169
--- /dev/null
+++ b/src/arm/intel/ixp/intel-ixp42x-goramo-multilink.dts
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Goramo MultiLink Router
+ * There are two variants:
+ * - MultiLink Basic (a box)
+ * - MultiLink Max (19" rack mount)
+ * This device tree supports MultiLink Basic.
+ * This machine is based on IXP425.
+ * This is one of the few devices supporting the IXP4xx High-Speed Serial
+ * (HSS) link for a V.35 WAN interface.
+ * The hardware originates in Poland.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Goramo MultiLink Router";
+ compatible = "goramo,multilink-router", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ /*
+ * 64 MB of RAM according to the manual. The MultiLink
+ * Max has 128 MB.
+ */
+ device_type = "memory";
+ reg = <0x00000000 0x4000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = "uart0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ /*
+ * 74HC4094 which is used as a rudimentary GPIO expander
+ * FIXME:
+ * - Create device tree bindings for this as GPIO expander
+ * - Write a pure DT GPIO driver using these bindings
+ * - Support cascading in the style of gpio-74x164.c (cannot be reused, very different)
+ */
+ gpio_74: gpio-74hc4094 {
+ compatible = "nxp,74hc4094";
+ cp-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ d-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ str-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ /* oe-gpios is optional */
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* We are not cascaded */
+ registers-number = <1>;
+ gpio-line-names = "CONTROL_HSS0_CLK_INT", "CONTROL_HSS1_CLK_INT", "CONTROL_HSS0_DTR_N",
+ "CONTROL_HSS1_DTR_N", "CONTROL_EXT", "CONTROL_AUTO_RESET",
+ "CONTROL_PCI_RESET_N", "CONTROL_EEPROM_WC_N";
+ };
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /* Enable writes on the expansion bus */
+ intel,ixp4xx-eb-write-enable = <1>;
+ /* 16 MB of Flash mapped in at CS0 */
+ reg = <0 0x00000000 0x1000000>;
+
+ partitions {
+ compatible = "redboot-fis";
+ /* Eraseblock at 0x0fe0000 */
+ fis-index-block = <0x7f>;
+ };
+ };
+ };
+
+ pci@c0000000 {
+ status = "okay";
+
+ /*
+ * The device has 4 slots (IDSEL) with one dedicated IRQ per slot.
+ * The slots have Ethernet, Ethernet, NEC and MPCI.
+ * The IDSELs are 11, 12, 13, 14.
+ */
+ interrupt-map =
+ /* IDSEL 11 - Ethernet A */
+ <0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */
+ <0x5800 0 0 2 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 11 is irq 4 */
+ <0x5800 0 0 3 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 11 is irq 4 */
+ <0x5800 0 0 4 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 11 is irq 4 */
+ /* IDSEL 12 - Ethernet B */
+ <0x6000 0 0 1 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 5 */
+ <0x6000 0 0 2 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 12 is irq 5 */
+ <0x6000 0 0 3 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 12 is irq 5 */
+ <0x6000 0 0 4 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 12 is irq 5 */
+ /* IDSEL 13 - MPCI */
+ <0x6800 0 0 1 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 12 */
+ <0x6800 0 0 2 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 12 */
+ <0x6800 0 0 3 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 13 is irq 12 */
+ <0x6800 0 0 4 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 13 is irq 12 */
+ /* IDSEL 14 - NEC */
+ <0x7000 0 0 1 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 3 */
+ <0x7000 0 0 2 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 3 */
+ <0x7000 0 0 3 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 14 is irq 3 */
+ <0x7000 0 0 4 &gpio0 3 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 14 is irq 3 */
+ };
+
+ /* HSS links */
+ npe@c8006000 {
+ hss@0 {
+ status = "okay";
+ intel,queue-chl-rxtrig = <&qmgr 12>;
+ intel,queue-chl-txready = <&qmgr 34>;
+ intel,queue-pkt-rx = <&qmgr 13>;
+ intel,queue-pkt-tx = <&qmgr 14>, <&qmgr 15>, <&qmgr 16>, <&qmgr 17>;
+ intel,queue-pkt-rxfree = <&qmgr 18>, <&qmgr 19>, <&qmgr 20>, <&qmgr 21>;
+ intel,queue-pkt-txdone = <&qmgr 22>;
+ /* The Goramo GPIO-based clock etc control */
+ cts-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ rts-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ dtr-gpios = <&gpio_74 2 GPIO_ACTIVE_LOW>;
+ clk-internal-gpios = <&gpio_74 0 GPIO_ACTIVE_HIGH>;
+ };
+ hss@1 {
+ status = "okay";
+ intel,queue-chl-rxtrig = <&qmgr 10>;
+ intel,queue-chl-txready = <&qmgr 35>;
+ intel,queue-pkt-rx = <&qmgr 0>;
+ intel,queue-pkt-tx = <&qmgr 5>, <&qmgr 6>, <&qmgr 7>, <&qmgr 8>;
+ intel,queue-pkt-rxfree = <&qmgr 1>, <&qmgr 2>, <&qmgr 3>, <&qmgr 4>;
+ intel,queue-pkt-txdone = <&qmgr 9>;
+ /* The Goramo GPIO-based clock etc control */
+ cts-gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ dtr-gpios = <&gpio_74 3 GPIO_ACTIVE_LOW>;
+ clk-internal-gpios = <&gpio_74 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ /* EthB */
+ ethernet@c8009000 {
+ status = "okay";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 32>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ /* EthC */
+ ethernet@c800a000 {
+ status = "okay";
+ queue-rx = <&qmgr 4>;
+ queue-txready = <&qmgr 33>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ };
+ };
+};
diff --git a/src/arm/intel/ixp/intel-ixp42x-iomega-nas100d.dts b/src/arm/intel/ixp/intel-ixp42x-iomega-nas100d.dts
new file mode 100644
index 0000000..26f02da
--- /dev/null
+++ b/src/arm/intel/ixp/intel-ixp42x-iomega-nas100d.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Iomega NAS 100D
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Iomega NAS 100D";
+ compatible = "iom,nas-100d", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ /* 64 MB SDRAM */
+ device_type = "memory";
+ reg = <0x00000000 0x4000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+ stdout-path = "uart0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-wlan {
+ label = "nas100d:red:wlan";
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ /* We don't have WLAN trigger in the kernel (yet) */
+ linux,default-trigger = "netdev";
+ };
+ led-disk {
+ label = "nas100d:red:disk";
+ gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "disk-activity";
+ };
+ led-power {
+ label = "nas100d:red:power";
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ button-power {
+ wakeup-source;
+ linux,code = <KEY_POWER>;
+ label = "power";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ };
+ button-reset {
+ wakeup-source;
+ linux,code = <KEY_RESTART>;
+ label = "reset";
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ i2c {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ timeout-ms = <5000>;
+ };
+
+ soc {
+ bus@c4000000 {
+ /* The first 16MB region at CS0 on the expansion bus */
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /*
+ * 8 MB of Flash in 0x20000 byte blocks
+ * mapped in at CS0.
+ */
+ reg = <0 0x00000000 0x800000>;
+
+ partitions {
+ compatible = "redboot-fis";
+ /* Eraseblock at 0x7e0000 */
+ fis-index-block = <0x3f>;
+ };
+ };
+ };
+
+ pci@c0000000 {
+ status = "okay";
+
+ /*
+ * Taken from NAS 100D PCI boardfile (nas100d-pci.c)
+ * We have slots (IDSEL) 1, 2 and 3 and pins 1, 2 and 3.
+ */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ /* IDSEL 1 */
+ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+ /* IDSEL 2 */
+ <0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+ /* IDSEL 3 */
+ <0x1800 0 0 1 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+ <0x1800 0 0 2 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
+ <0x1800 0 0 3 &gpio0 7 IRQ_TYPE_LEVEL_LOW>; /* INT C on slot 3 is irq 7 */
+ };
+
+ ethernet@c8009000 {
+ status = "okay";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+ };
+ };
+};
diff --git a/src/arm/intel/ixp/intel-ixp42x-ixdp425.dts b/src/arm/intel/ixp/intel-ixp42x-ixdp425.dts
new file mode 100644
index 0000000..1949457
--- /dev/null
+++ b/src/arm/intel/ixp/intel-ixp42x-ixdp425.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Intel IXDP425 also known as IXCDP1100 Control Plane
+ * processor reference design.
+ *
+ * This platform has the codename "Richfield".
+ *
+ * This machine is based on a 533 MHz IXP425.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include "intel-ixp4xx-reference-design.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Intel IXDP425/IXCDP1100 Richfield Reference Design";
+ compatible = "intel,ixdp425", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /* Enable writes on the expansion bus */
+ intel,ixp4xx-eb-write-enable = <1>;
+ /* 16 MB of Flash mapped in at CS0 */
+ reg = <0 0x00000000 0x1000000>;
+
+ partitions {
+ compatible = "redboot-fis";
+ /* Eraseblock at 0x0fe0000 */
+ fis-index-block = <0x7f>;
+ };
+ };
+ };
+
+ /* EthB */
+ ethernet@c8009000 {
+ status = "okay";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ /* EthC */
+ ethernet@c800a000 {
+ status = "okay";
+ queue-rx = <&qmgr 4>;
+ queue-txready = <&qmgr 21>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ };
+ };
+};
diff --git a/src/arm/intel/ixp/intel-ixp42x-ixdpg425.dts b/src/arm/intel/ixp/intel-ixp42x-ixdpg425.dts
new file mode 100644
index 0000000..7011fea
--- /dev/null
+++ b/src/arm/intel/ixp/intel-ixp42x-ixdpg425.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Intel IXDPG425 reference design.
+ * Derived from boardfiles written by MontaVista software.
+ * Ethernet set-up from OpenWrt.
+ *
+ * The device has 4 x FXS RJ11 ports for analog phones for
+ * internet telephony. (Not supported yet.)
+ *
+ * The device has 9 status LEDs we do not support yet.
+ *
+ * This device is very similar to ADI engingeering Coyote.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Intel IXDPG425 reference design";
+ compatible = "intel,ixdpg425", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ /* 32 MB SDRAM */
+ device_type = "memory";
+ reg = <0x00000000 0x02000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+ stdout-path = "uart0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /*
+ * CHECKME: the product brief says 16MB in a flash
+ * socket.
+ */
+ reg = <0 0x00000000 0x1000000>;
+
+ /* Configure expansion bus to allow writes */
+ intel,ixp4xx-eb-write-enable = <1>;
+
+ partitions {
+ compatible = "redboot-fis";
+ /* CHECKME: guess this is Redboot FIS */
+ fis-index-block = <0x7f>;
+ };
+ };
+ };
+
+ pci@c0000000 {
+ status = "okay";
+
+ /*
+ * Taken from IXDPG425 PCI boardfile.
+ * We have slots (IDSEL) 12, 13 and 14 with one assigned IRQ
+ * for 12 & 13 and one for 14.
+ */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ /* IDSEL 12 */
+ <0x6000 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 7 */
+ <0x6000 0 0 2 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 12 is irq 7 */
+ <0x6000 0 0 3 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 12 is irq 7 */
+ <0x6000 0 0 4 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 12 is irq 7 */
+ /* IDSEL 13 */
+ <0x6800 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 7 */
+ <0x6800 0 0 2 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 7 */
+ <0x6800 0 0 3 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 13 is irq 7 */
+ <0x6800 0 0 4 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 13 is irq 7 */
+ /* IDSEL 14 */
+ <0x7000 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 6 */
+ <0x7000 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 6 */
+ <0x7000 0 0 3 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 14 is irq 6 */
+ <0x7000 0 0 4 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 14 is irq 6 */
+ };
+
+ /*
+ * CHECKME: this ethernet setup seems dubious. Photos of the board shows some kind
+ * of Realtek DSA switch on the board.
+ */
+
+ /* EthB */
+ ethernet@c8009000 {
+ status = "okay";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ };
+ };
+ };
+
+ /* EthC */
+ ethernet@c800a000 {
+ status = "okay";
+ queue-rx = <&qmgr 4>;
+ queue-txready = <&qmgr 21>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy4>;
+ };
+ };
+};
diff --git a/src/arm/intel/ixp/intel-ixp42x-linksys-nslu2.dts b/src/arm/intel/ixp/intel-ixp42x-linksys-nslu2.dts
new file mode 100644
index 0000000..2eec5f6
--- /dev/null
+++ b/src/arm/intel/ixp/intel-ixp42x-linksys-nslu2.dts
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Linksys NSLU2
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Linksys NSLU2 (Network Storage Link for USB 2.0 Disk Drives)";
+ compatible = "linksys,nslu2", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ /* 32 MB SDRAM */
+ device_type = "memory";
+ reg = <0x00000000 0x2000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
+ stdout-path = "uart0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-status {
+ label = "nslu2:red:status";
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ led-ready {
+ label = "nslu2:green:ready";
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ led-disk-1 {
+ label = "nslu2:green:disk-1";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ led-disk-2 {
+ label = "nslu2:green:disk-2";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ button-power {
+ wakeup-source;
+ linux,code = <KEY_POWER>;
+ label = "power";
+ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ };
+ button-reset {
+ wakeup-source;
+ linux,code = <KEY_RESTART>;
+ label = "reset";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ i2c {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@6f {
+ compatible = "xicor,x1205";
+ reg = <0x6f>;
+ };
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ timeout-ms = <5000>;
+ };
+
+ gpio-beeper {
+ compatible = "gpio-beeper";
+ gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ soc {
+ bus@c4000000 {
+ /* The first 16MB region at CS0 on the expansion bus */
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /* Enable writes on the expansion bus */
+ intel,ixp4xx-eb-write-enable = <1>;
+ /*
+ * 8 MB of Flash in 0x20000 byte blocks
+ * mapped in at CS0.
+ */
+ reg = <0 0x00000000 0x800000>;
+
+ partitions {
+ compatible = "redboot-fis";
+ /* Eraseblock at 0x7e0000 */
+ fis-index-block = <0x3f>;
+ };
+ };
+ };
+
+ pci@c0000000 {
+ status = "okay";
+
+ /*
+ * Taken from NSLU2 PCI boardfile, INT A, B, C swizzled D constant
+ * We have slots (IDSEL) 1, 2 and 3.
+ */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ /* IDSEL 1 */
+ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+ <0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
+ <0x0800 0 0 3 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
+ <0x0800 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+ /* IDSEL 2 */
+ <0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+ <0x1000 0 0 2 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+ <0x1000 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 11 */
+ <0x1000 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 8 */
+ /* IDSEL 3 */
+ <0x1800 0 0 1 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+ <0x1800 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 11 */
+ <0x1800 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 10 */
+ <0x1800 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 3 is irq 8 */
+ };
+
+ ethernet@c8009000 {
+ status = "okay";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+ };
+};
diff --git a/src/arm/intel/ixp/intel-ixp42x-linksys-wrv54g.dts b/src/arm/intel/ixp/intel-ixp42x-linksys-wrv54g.dts
new file mode 100644
index 0000000..98275a3
--- /dev/null
+++ b/src/arm/intel/ixp/intel-ixp42x-linksys-wrv54g.dts
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Linksys WRV54G router
+ * Also known as Gemtek GTWX5715
+ * Based on a board file by George T. Joseph and other patches.
+ * This machine is based on IXP425.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Linksys WRV54G / Gemtek GTWX5715";
+ compatible = "linksys,wrv54g", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ /* 32 MB memory */
+ device_type = "memory";
+ reg = <0x00000000 0x2000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = "uart1:115200n8";
+ };
+
+ aliases {
+ /* UART2 is the primary console */
+ serial0 = &uart1;
+ serial1 = &uart0;
+ };
+
+ /* There is an unpopulated LED slot (3) connected to GPIO 8 */
+ leds {
+ compatible = "gpio-leds";
+ led-power {
+ label = "wrv54g:yellow:power";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ led-wireless {
+ label = "wrv54g:yellow:wireless";
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ led-internet {
+ label = "wrv54g:yellow:internet";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ led-dmz {
+ label = "wrv54g:green:dmz";
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+
+ /* This set-up comes from an OpenWrt patch */
+ spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+
+ switch@0 {
+ compatible = "micrel,ks8995";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+ };
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /* Enable writes on the expansion bus */
+ intel,ixp4xx-eb-write-enable = <1>;
+ /* 8 MB of Flash mapped in at CS0 */
+ reg = <0 0x00000000 0x00800000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ /*
+ * Partition info from a boot log
+ * CHECKME: not using redboot? FIS index 0x3f @7e00000?
+ */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "boot";
+ reg = <0x0 0x140000>;
+ read-only;
+ };
+ partition@140000 {
+ label = "linux";
+ reg = <0x140000 0x100000>;
+ read-only;
+ };
+ partition@240000 {
+ label = "root";
+ reg = <0x240000 0x480000>;
+ read-write;
+ };
+ };
+ };
+ };
+
+ pci@c0000000 {
+ status = "okay";
+
+ /*
+ * We have up to 2 slots (IDSEL) with 2 swizzled IRQs.
+ * Derived from the GTWX5715 PCI boardfile.
+ */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ /* IDSEL 0 */
+ <0x0000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 0 is irq 10 */
+ <0x0000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 0 is irq 11 */
+ /* IDSEL 1 */
+ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+ <0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>; /* INT B on slot 1 is irq 10 */
+ };
+
+ /*
+ * EthB - connected to the KS8995 switch ports 1-4
+ * FIXME: the boardfile defines .phy_mask = 0x1e for this port to enable output to
+ * all four switch ports, also using an out of tree multiphy patch.
+ * Do we need a new binding and property for this?
+ */
+ ethernet@c8009000 {
+ status = "okay";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy4>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Should be ports 1-4 on the KS8995 switch */
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ /* Should be port 5 on the KS8995 switch */
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ };
+ };
+ };
+
+ /* EthC - connected to KS8995 switch port 5 */
+ ethernet@c800a000 {
+ status = "okay";
+ queue-rx = <&qmgr 4>;
+ queue-txready = <&qmgr 21>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+ };
+ };
+};
diff --git a/src/arm/intel/ixp/intel-ixp42x-netgear-wg302v1.dts b/src/arm/intel/ixp/intel-ixp42x-netgear-wg302v1.dts
new file mode 100644
index 0000000..19d56e9
--- /dev/null
+++ b/src/arm/intel/ixp/intel-ixp42x-netgear-wg302v1.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Netgear WG302v2 based on IXP422BB
+ * Derived from boardfiles written by Imre Kaloz
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Netgear WG302 v1";
+ compatible = "netgear,wg302v1", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ /* 32 MB SDRAM according to boot arguments */
+ device_type = "memory";
+ reg = <0x00000000 0x02000000>;
+ };
+
+ chosen {
+ /* The RedBoot comes up in 9600 baud so let's keep this */
+ bootargs = "console=ttyS0,9600n8";
+ stdout-path = "uart1:9600n8";
+ };
+
+ aliases {
+ /* These are switched around */
+ serial0 = &uart1;
+ };
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /*
+ * 8 MB of Flash in 64 0x20000 sized blocks
+ * mapped in at CS0.
+ */
+ reg = <0 0x00000000 0x800000>;
+
+ /* Configure expansion bus to allow writes */
+ intel,ixp4xx-eb-write-enable = <1>;
+
+ partitions {
+ compatible = "redboot-fis";
+ fis-index-block = <0x3f>;
+ };
+ };
+ };
+
+ pci@c0000000 {
+ status = "okay";
+
+ /*
+ * Taken from WG302 v2 PCI boardfile (wg302v2-pci.c)
+ * We have slots (IDSEL) 1 and 2 with one assigned IRQ
+ * each handling all IRQs.
+ */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ /* IDSEL 1 */
+ <0x0800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 8 */
+ <0x0800 0 0 2 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 8 */
+ <0x0800 0 0 3 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 8 */
+ <0x0800 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+ /* IDSEL 2 */
+ <0x1000 0 0 1 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 9 */
+ <0x1000 0 0 2 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+ <0x1000 0 0 3 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 9 */
+ <0x1000 0 0 4 &gpio0 9 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 9 */
+ };
+
+ ethernet@c8009000 {
+ status = "okay";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy30>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy30: ethernet-phy@30 {
+ reg = <30>;
+ };
+ };
+ };
+ };
+};
diff --git a/src/arm/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts b/src/arm/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
new file mode 100644
index 0000000..90fd51b
--- /dev/null
+++ b/src/arm/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the USRobotics USR8200 firewall
+ * VPN and NAS. Based on know-how from Peter Denison.
+ *
+ * This machine is based on IXP422, the USR internal codename
+ * is "Jeeves".
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "USRobotics USR8200";
+ compatible = "usr,usr8200", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x4000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = "uart1:115200n8";
+ };
+
+ aliases {
+ /* These are switched around */
+ serial0 = &uart1;
+ serial1 = &uart0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ ieee1394_led: led-1394 {
+ label = "usr8200:green:1394";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ usb1_led: led-usb1 {
+ label = "usr8200:green:usb1";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ usb2_led: led-usb2 {
+ label = "usr8200:green:usb2";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ wireless_led: led-wireless {
+ /*
+ * This LED is mounted inside the case but cannot be
+ * seen from the outside: probably USR planned at one
+ * point for the device to have a wireless card, then
+ * changed their mind and didn't mount it, leaving the
+ * LED in place.
+ */
+ label = "usr8200:green:wireless";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ pwr_led: led-pwr {
+ label = "usr8200:green:pwr";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ button-reset {
+ wakeup-source;
+ linux,code = <KEY_RESTART>;
+ label = "reset";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /* Enable writes on the expansion bus */
+ intel,ixp4xx-eb-write-enable = <1>;
+ /* 16 MB of Flash mapped in at CS0 */
+ reg = <0 0x00000000 0x1000000>;
+
+ partitions {
+ compatible = "redboot-fis";
+ /* Eraseblock at 0x0fe0000 */
+ fis-index-block = <0x7f>;
+ };
+ };
+ rtc@2,0 {
+ /* EPSON RTC7301 DG DIL-capsule */
+ compatible = "epson,rtc7301dg";
+ /*
+ * These timing settings were found in the boardfile patch:
+ * IXP4XX_EXP_CS2 = 0x3fff000 | IXP4XX_EXP_BUS_SIZE(0) | IXP4XX_EXP_BUS_WR_EN |
+ * IXP4XX_EXP_BUS_CS_EN | IXP4XX_EXP_BUS_BYTE_EN;
+ */
+ intel,ixp4xx-eb-t1 = <0>; // no cycles extra address phase
+ intel,ixp4xx-eb-t2 = <0>; // no cycles extra setup phase
+ intel,ixp4xx-eb-t3 = <15>; // 15 cycles extra strobe phase
+ intel,ixp4xx-eb-t4 = <3>; // 3 cycles extra hold phase
+ intel,ixp4xx-eb-t5 = <15>; // 15 cycles extra recovery phase
+ intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle
+ intel,ixp4xx-eb-byte-access-on-halfword = <0>;
+ intel,ixp4xx-eb-mux-address-and-data = <0>;
+ intel,ixp4xx-eb-ahb-split-transfers = <0>;
+ intel,ixp4xx-eb-write-enable = <1>;
+ intel,ixp4xx-eb-byte-access = <1>;
+ /* 512 bytes at CS2 */
+ reg = <2 0x00000000 0x0000200>;
+ reg-io-width = <1>;
+ native-endian;
+ /* FIXME: try to check if there is an IRQ for the RTC? */
+ };
+ };
+
+ pci@c0000000 {
+ status = "okay";
+
+ /*
+ * Taken from USR8200 boardfile from OpenWrt
+ *
+ * We have 3 slots (IDSEL) with partly swizzled IRQs on slot 16.
+ * We assume the same IRQ for all pins on the remaining slots, that
+ * is what the boardfile was doing.
+ */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ /* IDSEL 14 used for "Wireless" in the board file */
+ <0x7000 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 7 */
+ /* IDSEL 15 used for VIA VT6307 IEEE 1394 Firewire */
+ <0x7800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 15 is irq 8 */
+ /* IDSEL 16 used for VIA VT6202 USB 2.0 4+1 */
+ <0x8000 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 16 is irq 11 */
+ <0x8000 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 16 is irq 10 */
+ <0x8000 0 0 3 &gpio0 9 IRQ_TYPE_LEVEL_LOW>; /* INT C on slot 16 is irq 9 */
+ };
+
+ gpio@c8004000 {
+ /* Enable clock out on GPIO 15 */
+ intel,ixp4xx-gpio15-clkout;
+ };
+
+ /* EthB WAN */
+ ethernet@c8009000 {
+ status = "okay";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy9>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy9: ethernet-phy@9 {
+ reg = <9>;
+ };
+
+ /* The switch uses MDIO addresses 16 thru 31 */
+ switch@16 {
+ compatible = "marvell,mv88e6060";
+ reg = <16>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port@5 {
+ /* Port 5 is the CPU port according to the MV88E6060 datasheet */
+ reg = <5>;
+ phy-mode = "rgmii-id";
+ ethernet = <ðc>;
+ label = "cpu";
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
+ };
+
+ /* EthC LAN connected to the Marvell DSA Switch */
+ ethc: ethernet@c800a000 {
+ status = "okay";
+ queue-rx = <&qmgr 4>;
+ queue-txready = <&qmgr 21>;
+ phy-mode = "rgmii";
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+ };
+};
diff --git a/src/arm/intel/ixp/intel-ixp42x-welltech-epbx100.dts b/src/arm/intel/ixp/intel-ixp42x-welltech-epbx100.dts
new file mode 100644
index 0000000..c550c42
--- /dev/null
+++ b/src/arm/intel/ixp/intel-ixp42x-welltech-epbx100.dts
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+
+/ {
+ model = "Welltech EPBX100";
+ compatible = "welltech,epbx100", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ /* 64 MB SDRAM */
+ device_type = "memory";
+ reg = <0x00000000 0x4000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 root=/dev/ram0 initrd=0x00800000,9M";
+ stdout-path = "uart0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /*
+ * 16 MB of Flash
+ */
+ reg = <0 0x00000000 0x1000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "RedBoot";
+ reg = <0x00000000 0x00080000>;
+ read-only;
+ };
+ partition@80000 {
+ label = "zImage";
+ reg = <0x00080000 0x00100000>;
+ read-only;
+ };
+ partition@180000 {
+ label = "ramdisk";
+ reg = <0x00180000 0x00300000>;
+ read-only;
+ };
+ partition@480000 {
+ label = "User";
+ reg = <0x00480000 0x00b60000>;
+ read-only;
+ };
+ partition@fe0000 {
+ label = "FIS directory";
+ reg = <0x00fe0000 0x001f000>;
+ read-only;
+ };
+ partition@fff000 {
+ label = "RedBoot config";
+ reg = <0x00fff000 0x0001000>;
+ read-only;
+ };
+ };
+ };
+ };
+
+ /* LAN port */
+ ethernet@c8009000 {
+ status = "okay";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ };
+ };
+ };
+ };
+};
diff --git a/src/arm/intel/ixp/intel-ixp42x.dtsi b/src/arm/intel/ixp/intel-ixp42x.dtsi
new file mode 100644
index 0000000..84cee8e
--- /dev/null
+++ b/src/arm/intel/ixp/intel-ixp42x.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Intel XScale Network Processors
+ * in the IXP 42x series. This series has 32 interrupts.
+ */
+#include "intel-ixp4xx.dtsi"
+
+/ {
+ soc {
+ bus@c4000000 {
+ compatible = "intel,ixp42x-expansion-bus-controller", "syscon";
+ reg = <0xc4000000 0x30>;
+ };
+
+ pci@c0000000 {
+ compatible = "intel,ixp42x-pci";
+ };
+
+ interrupt-controller@c8003000 {
+ compatible = "intel,ixp42x-interrupt";
+ };
+
+ /*
+ * This is the USB Device Mode (UDC) controller, which is used
+ * to present the IXP4xx as a device on a USB bus.
+ */
+ usb@c800b000 {
+ compatible = "intel,ixp4xx-udc";
+ reg = <0xc800b000 0x1000>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/src/arm/intel/ixp/intel-ixp43x-gateworks-gw2358.dts b/src/arm/intel/ixp/intel-ixp43x-gateworks-gw2358.dts
new file mode 100644
index 0000000..1db8495
--- /dev/null
+++ b/src/arm/intel/ixp/intel-ixp43x-gateworks-gw2358.dts
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Gateworks IXP43x-based Cambria GW2358
+ */
+
+/dts-v1/;
+
+#include "intel-ixp43x.dtsi"
+
+/ {
+ model = "Gateworks Cambria GW2358";
+ compatible = "gateworks,gw2358", "intel,ixp43x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ /* 128 MB SDRAM */
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
+ stdout-path = "uart0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-user {
+ label = "gw2358:green:LED";
+ gpios = <&pld1 0 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+
+ i2c {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hwmon@28 {
+ compatible = "adi,ad7418";
+ reg = <0x28>;
+ };
+ rtc: ds1672@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
+ eeprom@51 {
+ compatible = "atmel,24c08";
+ reg = <0x51>;
+ pagesize = <16>;
+ size = <1024>;
+ read-only;
+ };
+ pld0: pld@56 {
+ compatible = "gateworks,pld-gpio";
+ reg = <0x56>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ /* This PLD just handles the LED and user button */
+ pld1: pld@57 {
+ compatible = "gateworks,pld-gpio";
+ reg = <0x57>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /* Enable writes on the expansion bus */
+ intel,ixp4xx-eb-write-enable = <1>;
+ /*
+ * 32 MB of Flash in 0x20000 byte blocks
+ * mapped in at CS0 and CS1
+ */
+ reg = <0 0x00000000 0x2000000>;
+
+ partitions {
+ compatible = "redboot-fis";
+ /* Eraseblock at 0x1fe0000 */
+ fis-index-block = <0xff>;
+ };
+ };
+ ide@3,0 {
+ compatible = "intel,ixp4xx-compact-flash";
+ /*
+ * Set up expansion bus config to a really slow timing.
+ * The CF driver will dynamically reconfigure these timings
+ * depending on selected PIO mode (0-4).
+ */
+ intel,ixp4xx-eb-t1 = <3>; // 3 cycles extra address phase
+ intel,ixp4xx-eb-t2 = <3>; // 3 cycles extra setup phase
+ intel,ixp4xx-eb-t3 = <15>; // 15 cycles extra strobe phase
+ intel,ixp4xx-eb-t4 = <3>; // 3 cycles extra hold phase
+ intel,ixp4xx-eb-t5 = <15>; // 15 cycles extra recovery phase
+ intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle type
+ intel,ixp4xx-eb-byte-access-on-halfword = <1>;
+ intel,ixp4xx-eb-mux-address-and-data = <0>;
+ intel,ixp4xx-eb-ahb-split-transfers = <0>;
+ intel,ixp4xx-eb-write-enable = <1>;
+ intel,ixp4xx-eb-byte-access = <1>;
+ /* First register set is CMD second is CTL */
+ reg = <3 0xe00000 0x40000>, <3 0xe40000 0x40000>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
+ pci@c0000000 {
+ status = "okay";
+
+ /*
+ * In the boardfile for the Cambria from OpenWRT the interrupts
+ * are assigned one per IDSEL, so all 4 interrupts from IDSEL
+ * 1 are connected to IRQ 11, all 4 interrupts from IDSEL 2
+ * connected to IRQ 10 etc. I find this highly unlikely so I
+ * have instead assumed that they are rotated (swizzled) like
+ * this with 11, 10, 9, 8 for the 4 pins on IDSEL 1 etc.
+ */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ /* IDSEL 1 */
+ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+ <0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
+ <0x0800 0 0 3 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
+ <0x0800 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+ /* IDSEL 2 */
+ <0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+ <0x1000 0 0 2 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+ <0x1000 0 0 3 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 8 */
+ <0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 11 */
+ /* IDSEL 3 */
+ <0x1800 0 0 1 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+ <0x1800 0 0 2 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
+ <0x1800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 11 */
+ <0x1800 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 10 */
+ /* IDSEL 4 */
+ <0x2000 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 8 */
+ <0x2000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 11 */
+ <0x2000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 10 */
+ <0x2000 0 0 4 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 9 */
+ /* IDSEL 6 */
+ <0x3000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 10 */
+ <0x3000 0 0 2 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 9 */
+ <0x3000 0 0 3 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 8 */
+ <0x3000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 11 */
+ /* IDSEL 15 */
+ <0x7800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 8 */
+ <0x7800 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 11 */
+ <0x7800 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 10 */
+ <0x7800 0 0 4 &gpio0 9 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 3 is irq 9 */
+ };
+
+ ethernet@c800a000 {
+ status = "okay";
+ queue-rx = <&qmgr 4>;
+ queue-txready = <&qmgr 21>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+ };
+ };
+
+ ethernet@c800c000 {
+ status = "okay";
+ queue-rx = <&qmgr 2>;
+ queue-txready = <&qmgr 19>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy2>;
+ intel,npe-handle = <&npe 0>;
+ };
+ };
+};
diff --git a/src/arm/intel/ixp/intel-ixp43x-kixrp435.dts b/src/arm/intel/ixp/intel-ixp43x-kixrp435.dts
new file mode 100644
index 0000000..4703a8b
--- /dev/null
+++ b/src/arm/intel/ixp/intel-ixp43x-kixrp435.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Intel KIXRP435 Control Plane
+ * processor reference design.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp43x.dtsi"
+#include "intel-ixp4xx-reference-design.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Intel KIXRP435 Reference Design";
+ compatible = "intel,kixrp435", "intel,ixp43x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /* Enable writes on the expansion bus */
+ intel,ixp4xx-eb-write-enable = <1>;
+ /* 16 MB of Flash mapped in at CS0 */
+ reg = <0 0x00000000 0x1000000>;
+
+ partitions {
+ compatible = "redboot-fis";
+ /* Eraseblock at 0x0fe0000 */
+ fis-index-block = <0x7f>;
+ };
+ };
+ };
+
+ /* CHECKME: ethernet set-up taken from Gateworks Cambria */
+ ethernet@c800a000 {
+ status = "okay";
+ queue-rx = <&qmgr 4>;
+ queue-txready = <&qmgr 21>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+ };
+ };
+
+ ethernet@c800c000 {
+ status = "okay";
+ queue-rx = <&qmgr 2>;
+ queue-txready = <&qmgr 19>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy2>;
+ intel,npe-handle = <&npe 0>;
+ };
+ };
+};
diff --git a/src/arm/intel/ixp/intel-ixp43x.dtsi b/src/arm/intel/ixp/intel-ixp43x.dtsi
new file mode 100644
index 0000000..60bf990
--- /dev/null
+++ b/src/arm/intel/ixp/intel-ixp43x.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Intel XScale Network Processors
+ * in the IXP 43x series. This series has 64 interrupts and adds a few more
+ * peripherals over the 42x series.
+ */
+#include "intel-ixp4xx.dtsi"
+
+/ {
+ soc {
+ bus@c4000000 {
+ compatible = "intel,ixp43x-expansion-bus-controller", "syscon";
+ /* Uses at least up to 0x230 */
+ reg = <0xc4000000 0x1000>;
+ };
+
+ pci@c0000000 {
+ compatible = "intel,ixp43x-pci";
+ };
+
+ interrupt-controller@c8003000 {
+ compatible = "intel,ixp43x-interrupt";
+ };
+ };
+};
diff --git a/src/arm/intel/ixp/intel-ixp45x-ixp46x.dtsi b/src/arm/intel/ixp/intel-ixp45x-ixp46x.dtsi
new file mode 100644
index 0000000..1dd4a65
--- /dev/null
+++ b/src/arm/intel/ixp/intel-ixp45x-ixp46x.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Intel XScale Network Processors
+ * in the IXP45x and IXP46x series. This series has 64 interrupts and adds a
+ * few more peripherals over the 42x and 43x series so this extends the
+ * basic IXP4xx DTSI.
+ */
+#include "intel-ixp4xx.dtsi"
+
+/ {
+ soc {
+ bus@c4000000 {
+ compatible = "intel,ixp46x-expansion-bus-controller", "syscon";
+ /* Uses at least up to 0x124 */
+ reg = <0xc4000000 0x1000>;
+ };
+
+ rng@70002100 {
+ compatible = "intel,ixp46x-rng";
+ reg = <0x70002100 4>;
+ };
+
+ interrupt-controller@c8003000 {
+ compatible = "intel,ixp43x-interrupt";
+ };
+
+ /*
+ * This is the USB Device Mode (UDC) controller, which is used
+ * to present the IXP4xx as a device on a USB bus.
+ */
+ usb@c800b000 {
+ compatible = "intel,ixp4xx-udc";
+ reg = <0xc800b000 0x1000>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c@c8011000 {
+ compatible = "intel,ixp4xx-i2c";
+ reg = <0xc8011000 0x18>;
+ interrupts = <33 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ /* This is known as EthB1 */
+ ethernet@c800d000 {
+ compatible = "intel,ixp4xx-ethernet";
+ reg = <0xc800d000 0x1000>;
+ status = "disabled";
+ intel,npe = <1>;
+ /* Dummy values that depend on firmware */
+ queue-rx = <&qmgr 0>;
+ queue-txready = <&qmgr 0>;
+ };
+
+ /* This is known as EthB2 */
+ ethernet@c800e000 {
+ compatible = "intel,ixp4xx-ethernet";
+ reg = <0xc800e000 0x1000>;
+ status = "disabled";
+ intel,npe = <2>;
+ /* Dummy values that depend on firmware */
+ queue-rx = <&qmgr 0>;
+ queue-txready = <&qmgr 0>;
+ };
+
+ /* This is known as EthB3 */
+ ethernet@c800f000 {
+ compatible = "intel,ixp4xx-ethernet";
+ reg = <0xc800f000 0x1000>;
+ status = "disabled";
+ intel,npe = <3>;
+ /* Dummy values that depend on firmware */
+ queue-rx = <&qmgr 0>;
+ queue-txready = <&qmgr 0>;
+ };
+
+ ptp-timer@c8010000 {
+ compatible = "intel,ixp46x-ptp-timer";
+ reg = <0xc8010000 0x1000>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>, <7 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "master", "slave";
+ };
+ };
+};
diff --git a/src/arm/intel/ixp/intel-ixp46x-ixdp465.dts b/src/arm/intel/ixp/intel-ixp46x-ixdp465.dts
new file mode 100644
index 0000000..a062cd1
--- /dev/null
+++ b/src/arm/intel/ixp/intel-ixp46x-ixdp465.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Intel IXDP465 Control Plane processor reference
+ * design, codename "BMP".
+ */
+
+/dts-v1/;
+
+#include "intel-ixp45x-ixp46x.dtsi"
+#include "intel-ixp4xx-reference-design.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Intel IXDP465 BMP Reference Design";
+ compatible = "intel,ixdp465", "intel,ixp46x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /* Enable writes on the expansion bus */
+ intel,ixp4xx-eb-write-enable = <1>;
+ /* 32 MB of Flash mapped in at CS0 and CS1 */
+ reg = <0 0x00000000 0x2000000>;
+
+ partitions {
+ compatible = "redboot-fis";
+ /* Eraseblock at 0x1fe0000 */
+ fis-index-block = <0xff>;
+ };
+ };
+ };
+ /* TODO: configure ethernet etc */
+ };
+};
diff --git a/src/arm/intel/ixp/intel-ixp4xx-reference-design.dtsi b/src/arm/intel/ixp/intel-ixp4xx-reference-design.dtsi
new file mode 100644
index 0000000..31c0a69
--- /dev/null
+++ b/src/arm/intel/ixp/intel-ixp4xx-reference-design.dtsi
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree include file for Intel reference designs for the
+ * XScale Network Processors in the IXP 4xx series. Common device
+ * set-up for IXDP425, IXCDP1100, KIXRP435 and IXDP465.
+ */
+
+/ {
+ memory@0 {
+ /*
+ * The board supports up to 256 MB of memory. Here we put in
+ * 64 MB and this may be modified by the boot loader.
+ */
+ device_type = "memory";
+ reg = <0x00000000 0x4000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = "uart0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ i2c {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ /*
+ * Philips PCF8582C-2T/03 512byte I2C EEPROM
+ * should behave like an Atmel 24c04.
+ */
+ compatible = "atmel,24c04";
+ reg = <0x50>;
+ pagesize = <16>;
+ size = <512>;
+ read-only;
+ };
+ };
+
+ soc {
+ bus@c4000000 {
+ /* Flash memory defined per-variant */
+ nand-controller@3,0 {
+ /* Some designs have a NAND on CS3 enable it here if present */
+ status = "disabled";
+
+ /*
+ * gen_nand needs to be extended and documented to get
+ * command byte = 1 and address byte = 2 from the device
+ * tree.
+ */
+ compatible = "gen_nand";
+
+ /* Expansion bus set-up */
+ intel,ixp4xx-eb-t1 = <0>;
+ intel,ixp4xx-eb-t2 = <0>;
+ intel,ixp4xx-eb-t3 = <1>; // 1 cycle extra strobe phase
+ intel,ixp4xx-eb-t4 = <0>;
+ intel,ixp4xx-eb-t5 = <0>;
+ intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle type
+ intel,ixp4xx-eb-byte-access-on-halfword = <0>;
+ intel,ixp4xx-eb-mux-address-and-data = <0>;
+ intel,ixp4xx-eb-ahb-split-transfers = <0>;
+ intel,ixp4xx-eb-write-enable = <1>;
+ intel,ixp4xx-eb-byte-access = <1>;
+
+ /* 512 bytes memory window */
+ reg = <3 0x00000000 0x200>;
+ nand-on-flash-bbt;
+ nand-ecc-mode = "soft_bch";
+ nand-ecc-step-size = <512>;
+ nand-ecc-strength = <4>;
+ nce-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* NCE */
+
+ label = "ixp400 NAND";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ fs@0 {
+ label = "ixp400 NAND FS 0";
+ reg = <0x0 0x800000>;
+ };
+ fs@800000 {
+ label = "ixp400 NAND FS 1";
+ reg = <0x800000 0x0>;
+ };
+ };
+ };
+ };
+
+ pci@c0000000 {
+ status = "okay";
+
+ /*
+ * Taken from IXDP425 PCI boardfile.
+ * PCI slots on the BIXMB425BD base card.
+ * We have up to 4 slots (IDSEL) with 4 swizzled IRQs.
+ */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ /* IDSEL 1 */
+ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+ <0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
+ <0x0800 0 0 3 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
+ <0x0800 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+ /* IDSEL 2 */
+ <0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+ <0x1000 0 0 2 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+ <0x1000 0 0 3 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 8 */
+ <0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 11 */
+ /* IDSEL 3 */
+ <0x1800 0 0 1 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+ <0x1800 0 0 2 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
+ <0x1800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 11 */
+ <0x1800 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 10 */
+ /* IDSEL 4 */
+ <0x2000 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 4 is irq 8 */
+ <0x2000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 4 is irq 11 */
+ <0x2000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 4 is irq 10 */
+ <0x2000 0 0 4 &gpio0 9 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 4 is irq 9 */
+ };
+ };
+};
diff --git a/src/arm/intel/ixp/intel-ixp4xx.dtsi b/src/arm/intel/ixp/intel-ixp4xx.dtsi
new file mode 100644
index 0000000..51a716c
--- /dev/null
+++ b/src/arm/intel/ixp/intel-ixp4xx.dtsi
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Intel XScale Network Processors
+ * in the IXP 4xx series.
+ */
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "simple-bus";
+ interrupt-parent = <&intcon>;
+
+ /*
+ * The IXP4xx expansion bus is a set of up to 7 each up to 16MB
+ * windows in the 256MB space from 0x50000000 to 0x5fffffff.
+ */
+ bus@c4000000 {
+ /* compatible and reg filled in by per-soc device tree */
+ native-endian;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x50000000 0x01000000>,
+ <1 0x0 0x51000000 0x01000000>,
+ <2 0x0 0x52000000 0x01000000>,
+ <3 0x0 0x53000000 0x01000000>,
+ <4 0x0 0x54000000 0x01000000>,
+ <5 0x0 0x55000000 0x01000000>,
+ <6 0x0 0x56000000 0x01000000>,
+ <7 0x0 0x57000000 0x01000000>;
+ dma-ranges = <0 0x0 0x50000000 0x01000000>,
+ <1 0x0 0x51000000 0x01000000>,
+ <2 0x0 0x52000000 0x01000000>,
+ <3 0x0 0x53000000 0x01000000>,
+ <4 0x0 0x54000000 0x01000000>,
+ <5 0x0 0x55000000 0x01000000>,
+ <6 0x0 0x56000000 0x01000000>,
+ <7 0x0 0x57000000 0x01000000>;
+ };
+
+ qmgr: queue-manager@60000000 {
+ compatible = "intel,ixp4xx-ahb-queue-manager";
+ reg = <0x60000000 0x4000>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pci@c0000000 {
+ /* compatible filled in by per-soc device tree */
+ reg = <0xc0000000 0x1000>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
+ <9 IRQ_TYPE_LEVEL_HIGH>,
+ <10 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ bus-range = <0x00 0xff>;
+ status = "disabled";
+
+ ranges =
+ /*
+ * 64MB 32bit non-prefetchable memory 0x48000000-0x4bffffff
+ * done in 4 chunks of 16MB each.
+ */
+ <0x02000000 0 0x48000000 0x48000000 0 0x04000000>,
+ /* 64KB I/O space at 0x4c000000 */
+ <0x01000000 0 0x00000000 0x4c000000 0 0x00010000>;
+
+ /*
+ * This needs to map to the start of physical memory so
+ * PCI devices can see all (hopefully) memory. This is done
+ * using 4 1:1 16MB windows, so the RAM should not be more than
+ * 64 MB for this to work. If your memory is anywhere else
+ * than at 0x0 you need to alter this.
+ */
+ dma-ranges =
+ <0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+ /* Each unique DTS using PCI must specify the swizzling */
+ };
+
+ uart0: serial@c8000000 {
+ compatible = "intel,xscale-uart";
+ reg = <0xc8000000 0x1000>;
+ /*
+ * The reg-offset and reg-shift is a side effect
+ * of running the platform in big endian mode.
+ */
+ reg-offset = <3>;
+ reg-shift = <2>;
+ interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <14745600>;
+ no-loopback-test;
+ };
+
+ uart1: serial@c8001000 {
+ compatible = "intel,xscale-uart";
+ reg = <0xc8001000 0x1000>;
+ /*
+ * The reg-offset and reg-shift is a side effect
+ * of running the platform in big endian mode.
+ */
+ reg-offset = <3>;
+ reg-shift = <2>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <14745600>;
+ no-loopback-test;
+ };
+
+ gpio0: gpio@c8004000 {
+ compatible = "intel,ixp4xx-gpio";
+ reg = <0xc8004000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ intcon: interrupt-controller@c8003000 {
+ /*
+ * Note: no compatible string. The subvariant of the
+ * chip needs to define what version it is. The
+ * location of the interrupt controller is fixed in
+ * memory across all variants.
+ */
+ reg = <0xc8003000 0x100>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ timer@c8005000 {
+ compatible = "intel,ixp4xx-timer";
+ reg = <0xc8005000 0x100>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ npe: npe@c8006000 {
+ compatible = "intel,ixp4xx-network-processing-engine";
+ reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* NPE-A contains two high-speed serial links */
+ hss@0 {
+ compatible = "intel,ixp4xx-hss";
+ reg = <0>;
+ intel,npe-handle = <&npe 0>;
+ status = "disabled";
+ };
+
+ hss@1 {
+ compatible = "intel,ixp4xx-hss";
+ reg = <1>;
+ intel,npe-handle = <&npe 0>;
+ status = "disabled";
+ };
+
+ /* NPE-C contains a crypto accelerator */
+ crypto {
+ compatible = "intel,ixp4xx-crypto";
+ intel,npe-handle = <&npe 2>;
+ queue-rx = <&qmgr 30>;
+ queue-txready = <&qmgr 29>;
+ };
+ };
+
+ /* This is known as EthB */
+ ethernet@c8009000 {
+ compatible = "intel,ixp4xx-ethernet";
+ reg = <0xc8009000 0x1000>;
+ status = "disabled";
+ /* Dummy values that depend on firmware */
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ intel,npe-handle = <&npe 1>;
+ };
+
+ /* This is known as EthC */
+ ethernet@c800a000 {
+ compatible = "intel,ixp4xx-ethernet";
+ reg = <0xc800a000 0x1000>;
+ status = "disabled";
+ /* Dummy values that depend on firmware */
+ queue-rx = <&qmgr 0>;
+ queue-txready = <&qmgr 0>;
+ intel,npe-handle = <&npe 2>;
+ };
+
+ /* This is known as EthA */
+ ethernet@c800c000 {
+ compatible = "intel,ixp4xx-ethernet";
+ reg = <0xc800c000 0x1000>;
+ status = "disabled";
+ intel,npe = <0>;
+ /* Dummy values that depend on firmware */
+ queue-rx = <&qmgr 0>;
+ queue-txready = <&qmgr 0>;
+ };
+ };
+};
diff --git a/src/arm/intel/pxa/pxa25x.dtsi b/src/arm/intel/pxa/pxa25x.dtsi
new file mode 100644
index 0000000..5f8300e
--- /dev/null
+++ b/src/arm/intel/pxa/pxa25x.dtsi
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Robert Jarzmik <robert.jarzmik@free.fr>
+ */
+#include "pxa2xx.dtsi"
+#include "dt-bindings/clock/pxa-clock.h"
+
+/ {
+ model = "Marvell PXA25x family SoC";
+ compatible = "marvell,pxa250";
+
+ clocks {
+ /*
+ * The muxing of external clocks/internal dividers for osc* clock
+ * sources has been hidden under the carpet by now.
+ */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clks: pxa2xx_clks@41300004 {
+ compatible = "marvell,pxa250-core-clocks";
+ #clock-cells = <1>;
+ status = "okay";
+ };
+
+ /* timer oscillator */
+ clktimer: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <3686400>;
+ clock-output-names = "ostimer";
+ };
+ };
+
+ pxabus {
+ pdma: dma-controller@40000000 {
+ compatible = "marvell,pdma-1.0";
+ reg = <0x40000000 0x10000>;
+ interrupts = <25>;
+ #dma-cells = <2>;
+ /* For backwards compatibility: */
+ #dma-channels = <16>;
+ dma-channels = <16>;
+ #dma-requests = <40>;
+ dma-requests = <40>;
+ status = "okay";
+ };
+
+ pxairq: interrupt-controller@40d00000 {
+ marvell,intc-priority;
+ marvell,intc-nr-irqs = <32>;
+ };
+
+ pinctrl: pinctrl@40e00000 {
+ reg = <0x40e00054 0x20 0x40e0000c 0xc 0x40e0010c 4
+ 0x40f00020 0x10>;
+ compatible = "marvell,pxa25x-pinctrl";
+ };
+
+ gpio: gpio@40e00000 {
+ compatible = "intel,pxa25x-gpio";
+ gpio-ranges = <&pinctrl 0 0 84>;
+ clocks = <&clks CLK_NONE>;
+ };
+
+ pwm0: pwm@40b00000 {
+ compatible = "marvell,pxa250-pwm";
+ reg = <0x40b00000 0x10>;
+ #pwm-cells = <1>;
+ clocks = <&clks CLK_PWM0>;
+ };
+
+ pwm1: pwm@40b00010 {
+ compatible = "marvell,pxa250-pwm";
+ reg = <0x40b00010 0x10>;
+ #pwm-cells = <1>;
+ clocks = <&clks CLK_PWM1>;
+ };
+
+ rtc@40900000 {
+ clocks = <&clks CLK_OSC32k768>;
+ };
+ };
+
+ timer@40a00000 {
+ compatible = "marvell,pxa-timer";
+ reg = <0x40a00000 0x20>;
+ interrupts = <26>;
+ clocks = <&clktimer>;
+ status = "okay";
+ };
+
+ pxa250_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+
+ opp-99532800 {
+ opp-hz = /bits/ 64 <99532800>;
+ opp-microvolt = <1000000 950000 1650000>;
+ clock-latency-ns = <20>;
+ };
+ opp-199065600 {
+ opp-hz = /bits/ 64 <199065600>;
+ opp-microvolt = <1000000 950000 1650000>;
+ clock-latency-ns = <20>;
+ };
+ opp-298598400 {
+ opp-hz = /bits/ 64 <298598400>;
+ opp-microvolt = <1100000 1045000 1650000>;
+ clock-latency-ns = <20>;
+ };
+ opp-398131200 {
+ opp-hz = /bits/ 64 <398131200>;
+ opp-microvolt = <1300000 1235000 1650000>;
+ clock-latency-ns = <20>;
+ };
+ };
+};
diff --git a/src/arm/intel/pxa/pxa27x.dtsi b/src/arm/intel/pxa/pxa27x.dtsi
new file mode 100644
index 0000000..a2cbfb3
--- /dev/null
+++ b/src/arm/intel/pxa/pxa27x.dtsi
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0
+/* The pxa3xx skeleton simply augments the 2xx version */
+#include "pxa2xx.dtsi"
+#include "dt-bindings/clock/pxa-clock.h"
+
+/ {
+ model = "Marvell PXA27x familiy SoC";
+ compatible = "marvell,pxa27x";
+
+ pxabus {
+ pdma: dma-controller@40000000 {
+ compatible = "marvell,pdma-1.0";
+ reg = <0x40000000 0x10000>;
+ interrupts = <25>;
+ #dma-cells = <2>;
+ /* For backwards compatibility: */
+ #dma-channels = <32>;
+ dma-channels = <32>;
+ #dma-requests = <75>;
+ dma-requests = <75>;
+ status = "okay";
+ };
+
+ pxairq: interrupt-controller@40d00000 {
+ marvell,intc-priority;
+ marvell,intc-nr-irqs = <34>;
+ };
+
+ pinctrl: pinctrl@40e00000 {
+ reg = <0x40e00054 0x20 0x40e0000c 0xc 0x40e0010c 4
+ 0x40f00020 0x10>;
+ compatible = "marvell,pxa27x-pinctrl";
+ };
+
+ gpio: gpio@40e00000 {
+ compatible = "intel,pxa27x-gpio";
+ gpio-ranges = <&pinctrl 0 0 128>;
+ clocks = <&clks CLK_NONE>;
+ };
+
+ usb0: usb@4c000000 {
+ compatible = "marvell,pxa-ohci";
+ reg = <0x4c000000 0x10000>;
+ interrupts = <3>;
+ clocks = <&clks CLK_USBHOST>;
+ status = "disabled";
+ };
+
+ pwm0: pwm@40b00000 {
+ compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+ reg = <0x40b00000 0x10>;
+ #pwm-cells = <1>;
+ clocks = <&clks CLK_PWM0>;
+ };
+
+ pwm1: pwm@40b00010 {
+ compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+ reg = <0x40b00010 0x10>;
+ #pwm-cells = <1>;
+ clocks = <&clks CLK_PWM1>;
+ };
+
+ pwm2: pwm@40c00000 {
+ compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+ reg = <0x40c00000 0x10>;
+ #pwm-cells = <1>;
+ clocks = <&clks CLK_PWM0>;
+ };
+
+ pwm3: pwm@40c00010 {
+ compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+ reg = <0x40c00010 0x10>;
+ #pwm-cells = <1>;
+ clocks = <&clks CLK_PWM1>;
+ };
+
+ pwri2c: i2c@40f00180 {
+ compatible = "mrvl,pxa-i2c";
+ reg = <0x40f00180 0x24>;
+ interrupts = <6>;
+ clocks = <&clks CLK_PWRI2C>;
+ #address-cells = <0x1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ pxa27x_udc: udc@40600000 {
+ compatible = "marvell,pxa270-udc";
+ reg = <0x40600000 0x10000>;
+ interrupts = <11>;
+ clocks = <&clks CLK_USB>;
+ status = "disabled";
+ };
+
+ keypad: keypad@41500000 {
+ compatible = "marvell,pxa27x-keypad";
+ reg = <0x41500000 0x4c>;
+ interrupts = <4>;
+ clocks = <&clks CLK_KEYPAD>;
+ status = "disabled";
+ };
+
+ pxa_camera: imaging@50000000 {
+ compatible = "marvell,pxa270-qci";
+ reg = <0x50000000 0x1000>;
+ interrupts = <33>;
+ dmas = <&pdma 68 0 /* Y channel */
+ &pdma 69 0 /* U channel */
+ &pdma 70 0>; /* V channel */
+ dma-names = "CI_Y", "CI_U", "CI_V";
+
+ clocks = <&clks CLK_CAMERA>;
+ clock-names = "ciclk";
+ clock-frequency = <5000000>;
+ clock-output-names = "qci_mclk";
+
+ status = "disabled";
+ };
+
+ rtc@40900000 {
+ clocks = <&clks CLK_OSC32k768>;
+ };
+ };
+
+ clocks {
+ /*
+ * The muxing of external clocks/internal dividers for osc* clock
+ * sources has been hidden under the carpet by now.
+ */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clks: pxa2xx_clks@41300004 {
+ compatible = "marvell,pxa270-clocks";
+ #clock-cells = <1>;
+ status = "okay";
+ };
+ };
+
+ timer@40a00000 {
+ compatible = "marvell,pxa-timer";
+ reg = <0x40a00000 0x20>;
+ interrupts = <26>;
+ clocks = <&clks CLK_OSTIMER>;
+ status = "okay";
+ };
+
+ pxa270_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+
+ opp-104000000 {
+ opp-hz = /bits/ 64 <104000000>;
+ opp-microvolt = <900000 900000 1705000>;
+ clock-latency-ns = <20>;
+ };
+ opp-156000000 {
+ opp-hz = /bits/ 64 <156000000>;
+ opp-microvolt = <1000000 1000000 1705000>;
+ clock-latency-ns = <20>;
+ };
+ opp-208000000 {
+ opp-hz = /bits/ 64 <208000000>;
+ opp-microvolt = <1180000 1180000 1705000>;
+ clock-latency-ns = <20>;
+ };
+ opp-312000000 {
+ opp-hz = /bits/ 64 <312000000>;
+ opp-microvolt = <1250000 1250000 1705000>;
+ clock-latency-ns = <20>;
+ };
+ opp-416000000 {
+ opp-hz = /bits/ 64 <416000000>;
+ opp-microvolt = <1350000 1350000 1705000>;
+ clock-latency-ns = <20>;
+ };
+ opp-520000000 {
+ opp-hz = /bits/ 64 <520000000>;
+ opp-microvolt = <1450000 1450000 1705000>;
+ clock-latency-ns = <20>;
+ };
+ opp-624000000 {
+ opp-hz = /bits/ 64 <624000000>;
+ opp-microvolt = <1550000 1550000 1705000>;
+ clock-latency-ns = <20>;
+ };
+ };
+};
diff --git a/src/arm/intel/pxa/pxa2xx.dtsi b/src/arm/intel/pxa/pxa2xx.dtsi
new file mode 100644
index 0000000..84154c4
--- /dev/null
+++ b/src/arm/intel/pxa/pxa2xx.dtsi
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * pxa2xx.dtsi - Device Tree Include file for Marvell PXA2xx family SoC
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "dt-bindings/clock/pxa-clock.h"
+
+#define PMGROUP(pin) #pin
+#define PMMUX(func, pin, af) \
+ mux- ## func { \
+ groups = PMGROUP(P ## pin); \
+ function = #af; \
+ }
+#define PMMUX_LPM_LOW(func, pin, af) \
+ mux- ## func { \
+ groups = PMGROUP(P ## pin); \
+ function = #af; \
+ low-power-disable; \
+ }
+#define PMMUX_LPM_HIGH(func, pin, af) \
+ mux- ## func { \
+ groups = PMGROUP(P ## pin); \
+ function = #af; \
+ low-power-enable; \
+ }
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "Marvell PXA2xx family SoC";
+ compatible = "marvell,pxa2xx";
+ interrupt-parent = <&pxairq>;
+
+ aliases {
+ serial0 = &ffuart;
+ serial1 = &btuart;
+ serial2 = &stuart;
+ serial3 = &hwuart;
+ i2c0 = &pwri2c;
+ i2c1 = &pxai2c1;
+ };
+
+ cpus {
+ cpu {
+ compatible = "marvell,xscale";
+ device_type = "cpu";
+ };
+ };
+
+ pxabus {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pxairq: interrupt-controller@40d00000 {
+ #interrupt-cells = <1>;
+ compatible = "marvell,pxa-intc";
+ interrupt-controller;
+ interrupt-parent;
+ marvell,intc-nr-irqs = <32>;
+ reg = <0x40d00000 0xd0>;
+ };
+
+ gpio: gpio@40e00000 {
+ compatible = "mrvl,pxa-gpio";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ reg = <0x40e00000 0x10000>;
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ interrupts = <8>, <9>, <10>;
+ interrupt-names = "gpio0", "gpio1", "gpio_mux";
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ ranges;
+
+ gcb0: gpio@40e00000 {
+ reg = <0x40e00000 0x4>;
+ };
+
+ gcb1: gpio@40e00004 {
+ reg = <0x40e00004 0x4>;
+ };
+
+ gcb2: gpio@40e00008 {
+ reg = <0x40e00008 0x4>;
+ };
+ gcb3: gpio@40e0000c {
+ reg = <0x40e0000c 0x4>;
+ };
+ };
+
+ ffuart: serial@40100000 {
+ compatible = "mrvl,pxa-uart";
+ reg = <0x40100000 0x30>;
+ interrupts = <22>;
+ clocks = <&clks CLK_FFUART>;
+ status = "disabled";
+ };
+
+ btuart: serial@40200000 {
+ compatible = "mrvl,pxa-uart";
+ reg = <0x40200000 0x30>;
+ interrupts = <21>;
+ clocks = <&clks CLK_BTUART>;
+ status = "disabled";
+ };
+
+ stuart: serial@40700000 {
+ compatible = "mrvl,pxa-uart";
+ reg = <0x40700000 0x30>;
+ interrupts = <20>;
+ clocks = <&clks CLK_STUART>;
+ status = "disabled";
+ };
+
+ hwuart: serial@41600000 {
+ compatible = "mrvl,pxa-uart";
+ reg = <0x41600000 0x30>;
+ interrupts = <7>;
+ status = "disabled";
+ };
+
+ pxai2c1: i2c@40301680 {
+ compatible = "mrvl,pxa-i2c";
+ reg = <0x40301680 0x30>;
+ interrupts = <18>;
+ clocks = <&clks CLK_I2C>;
+ #address-cells = <0x1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ mmc0: mmc@41100000 {
+ compatible = "marvell,pxa-mmc";
+ reg = <0x41100000 0x1000>;
+ interrupts = <23>;
+ clocks = <&clks CLK_MMC>;
+ dmas = <&pdma 21 3
+ &pdma 22 3>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ rtc@40900000 {
+ compatible = "marvell,pxa-rtc";
+ reg = <0x40900000 0x3c>;
+ interrupts = <30 31>;
+ };
+
+ lcdc: lcd-controller@40500000 {
+ compatible = "marvell,pxa2xx-lcdc";
+ reg = <0x44000000 0x10000>;
+ interrupts = <17>;
+ clocks = <&clks CLK_LCD>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/src/arm/intel/pxa/pxa300-raumfeld-common.dtsi b/src/arm/intel/pxa/pxa300-raumfeld-common.dtsi
new file mode 100644
index 0000000..147c991
--- /dev/null
+++ b/src/arm/intel/pxa/pxa300-raumfeld-common.dtsi
@@ -0,0 +1,405 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "pxa3xx.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ /* Will be overridden by bootloader */
+ hw-revision = <0>;
+
+ chosen {
+ bootargs = "root=ubi0:RootFS rootfstype=ubifs rw ubi.mtd=3";
+ stdout-path = &ffuart;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0xa0000000 0x8000000>; /* 128 MB */
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3-fixed-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8-fixed-supply";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_va_5v0: regulator-va-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "va-5v0-fixed-supply";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 124 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ ssp_dai0: ssp-dai0 {
+ compatible = "mrvl,pxa-ssp-dai";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ssp0_dai_pins>;
+ port = <&ssp1>;
+ #sound-dai-cells = <0>;
+ dmas = <&pdma 13 3
+ &pdma 14 3>;
+ dma-names = "rx", "tx";
+ clock-names = "extclk";
+ };
+
+ ssp_dai1: ssp-dai1 {
+ compatible = "mrvl,pxa-ssp-dai";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ssp1_dai_pins>;
+ port = <&ssp2>;
+ #sound-dai-cells = <0>;
+ dmas = <&pdma 15 3
+ &pdma 16 3>;
+ dma-names = "rx", "tx";
+ clock-names = "extclk";
+ };
+
+ spi: spi {
+ compatible = "spi-gpio";
+ #address-cells = <0x1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins>;
+ gpio-sck = <&gpio 95 GPIO_ACTIVE_HIGH>;
+ gpio-miso = <&gpio 98 GPIO_ACTIVE_HIGH>;
+ gpio-mosi = <&gpio 97 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <
+ &gpio 34 GPIO_ACTIVE_HIGH
+ &gpio 125 GPIO_ACTIVE_HIGH
+ &gpio 96 GPIO_ACTIVE_HIGH
+ >;
+ num-chipselects = <3>;
+
+ dac: dac@2 {
+ compatible = "ti,dac7512";
+ reg = <2>;
+ spi-max-frequency = <1000000>;
+ vcc-supply = <®_3v3>;
+ };
+ };
+
+ keys: gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pins>;
+
+ on-off {
+ label = "on_off button";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_F6>;
+ };
+
+ rescue-boot {
+ label = "rescue boot button";
+ gpios = <&gpio 115 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_F4>;
+ };
+
+ setup {
+ label = "setup";
+ gpios = <&gpio 119 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_F3>;
+ };
+ };
+
+ rotary: rotary-encoder {
+ compatible = "rotary-encoder";
+ gpios = <
+ &gpio 19 GPIO_ACTIVE_LOW
+ &gpio 20 GPIO_ACTIVE_HIGH
+ >;
+ linux,axis = <REL_X>;
+ rotary-encoder,relative-axis;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_a &led_pins_b>;
+
+ left {
+ label = "raumfeld:1";
+ gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+ };
+
+ right {
+ label = "raumfeld:2";
+ gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-names = "default";
+ pinctrl-0 = <&poweroff_pins>;
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ mmc0_pwrseq: mmc-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pwrseq_pins>;
+ reset-gpios = <
+ &gpio 113 GPIO_ACTIVE_LOW /* W2W_RESET */
+ &gpio 114 GPIO_ACTIVE_LOW /* W2W_PDN */
+ >;
+ };
+
+ ethernet: ethernet@10000000 {
+ compatible = "smsc,lan9115";
+ pinctrl-names = "default";
+ pinctrl-0 = <&smsc_pins &smsc_bus_pins>;
+ reg = <0x10000000 0x100000>;
+ phy-mode = "mii";
+ interrupt-parent = <&gpio>;
+ interrupts = <40 IRQ_TYPE_EDGE_FALLING>;
+ vdd33a-supply = <®_3v3>;
+ vddvario-supply = <®_1v8>;
+ reset-gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+ reg-io-width = <4>;
+ smsc,save-mac-address;
+ smsc,irq-push-pull;
+ };
+};
+
+&ffuart {
+ status = "okay";
+};
+
+&pwri2c {
+ status = "okay";
+
+ max8660: regulator@34 {
+ compatible = "maxim,max8660";
+ reg = <0x34>;
+
+ regulators {
+ regulator-v3 {
+ regulator-compatible = "V3(DCDC)";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator-v4 {
+ regulator-compatible = "V4(DCDC)";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator-v5 {
+ regulator-compatible = "V5(LDO)";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ reg_vcc_sdio: regulator-v6 {
+ regulator-compatible = "V6(LDO)";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator-v7 {
+ regulator-compatible = "V7(LDO)";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+};
+
+&pxai2c1 {
+ status = "okay";
+ mrvl,i2c-fast-mode;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pxai2c1_pins>;
+};
+
+&ssp1 {
+ status = "okay";
+};
+
+&ssp2 {
+ status = "okay";
+};
+
+&nand_controller {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ nand-rb = <0>;
+ nand-ecc-mode = "hw";
+ marvell,nand-keep-config;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Bootloader";
+ reg = <0x0000000 0xa0000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "BootloaderEnvironment";
+ reg = <0x0a0000 0x20000>;
+ };
+
+ partition@c0000 {
+ label = "BootloaderSplashScreen";
+ reg = <0x0c0000 0x60000>;
+ };
+
+ partition@120000 {
+ label = "UBI";
+ reg = <0x120000 0x7ee0000>;
+ };
+ };
+ };
+};
+
+&usb0 {
+ status = "okay";
+ marvell,enable-port1;
+ marvell,port-mode = <2>; /* PMM_GLOBAL_MODE */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pxa3xx_ohci_pins>;
+};
+
+&mmc0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ pxa-mmc,detect-delay-ms = <200>;
+ vmmc-supply = <®_vcc_sdio>;
+ mmc-pwrseq = <&mmc0_pwrseq>;
+ non-removable;
+ bus-width = <4>;
+};
+
+&pinctrl {
+ poweroff_pins: poweroff-pins {
+ pinctrl-single,pins = <MFP_PIN_PXA300(16) MFP_AF0>;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+ };
+
+ led_pins_a: led-pins-a {
+ pinctrl-single,pins = <MFP_PIN_PXA300(35) MFP_AF0>;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+
+ led_pins_b: led-pins-b {
+ pinctrl-single,pins = <MFP_PIN_PXA300(36) MFP_AF0>;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH);
+ };
+
+ pxai2c1_pins: pxai2c1-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(21) MFP_AF1 /* I2C_SCL */
+ MFP_PIN_PXA300(22) MFP_AF1 /* I2C_SDA */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
+ };
+
+ gpio_keys_pins: gpio-keys-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(14) MFP_AF0 /* on-off */
+ MFP_PIN_PXA300(115) MFP_AF0 /* rescue boot */
+ MFP_PIN_PXA300(119) MFP_AF0 /* setup */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+ };
+
+ spi_pins: spi-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(95) MFP_AF0 /* SCK */
+ MFP_PIN_PXA300(97) MFP_AF0 /* MOSI */
+ MFP_PIN_PXA300(98) MFP_AF0 /* MISO */
+ MFP_PIN_PXA300(34) MFP_AF0 /* CS#0 */
+ MFP_PIN_PXA300(125) MFP_AF0 /* CS#1 */
+ MFP_PIN_PXA300(96) MFP_AF0 /* CS#2 */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+
+ pxa3xx_ohci_pins: pxa3xx-ohci-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300_2(0) MFP_AF1 /* USBHPEN */
+ MFP_PIN_PXA300_2(1) MFP_AF1 /* USBHPWR */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+
+ smsc_pins: smsc-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(39) MFP_AF0 /* RESET */
+ MFP_PIN_PXA300(40) MFP_AF0 /* IRQ */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+
+ smsc_bus_pins: smsc-bus-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(1) MFP_AF1 /* nCS2 */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+ };
+
+ mmc0_pins: mmc0-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(3) MFP_AF4 /* MMC1_DAT0 */
+ MFP_PIN_PXA300(4) MFP_AF4 /* MMC1_DAT1 */
+ MFP_PIN_PXA300(5) MFP_AF4 /* MMC1_DAT2 */
+ MFP_PIN_PXA300(6) MFP_AF4 /* MMC1_DAT3 */
+ MFP_PIN_PXA300(7) MFP_AF4 /* MMC1_CLK */
+ MFP_PIN_PXA300(8) MFP_AF4 /* MMC1_CMD */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH);
+ };
+
+ mmc0_pwrseq_pins: mmc0-pwrseq-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(113) MFP_AF0 /* W2W_RESET */
+ MFP_PIN_PXA300(114) MFP_AF0 /* W2W_PDN */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+ };
+
+ ssp0_dai_pins: ssp0-dai-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(85) MFP_AF1 /* SSP1_SCLK */
+ MFP_PIN_PXA300(86) MFP_AF1 /* SSP1_FRM */
+ MFP_PIN_PXA300(87) MFP_AF1 /* SSP1_TXD */
+ MFP_PIN_PXA300(88) MFP_AF1 /* SSP1_RXD */
+ MFP_PIN_PXA300(89) MFP_AF1 /* SSP1_EXTCLK */
+ MFP_PIN_PXA300(90) MFP_AF1 /* SSP1_SYSCLK */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+
+ ssp1_dai_pins: ssp1-dai-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(25) MFP_AF2 /* SSP2_SCLK */
+ MFP_PIN_PXA300(26) MFP_AF2 /* SSP2_FRM */
+ MFP_PIN_PXA300(27) MFP_AF2 /* SSP2_TXD */
+ MFP_PIN_PXA300(29) MFP_AF2 /* SSP2_EXTCLK */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+};
diff --git a/src/arm/intel/pxa/pxa300-raumfeld-connector.dts b/src/arm/intel/pxa/pxa300-raumfeld-connector.dts
new file mode 100644
index 0000000..3e94454
--- /dev/null
+++ b/src/arm/intel/pxa/pxa300-raumfeld-connector.dts
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+#include "pxa300-raumfeld-tuneable-clock.dtsi"
+
+/ {
+ model = "Raumfeld Connector (PXA3xx)";
+ compatible = "raumfeld,raumfeld-connector-pxa303", "marvell,pxa300";
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "Raumfeld Connector";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ simple-audio-card,dai-link@0 {
+ reg = <0>;
+ format = "i2s";
+ bitclock-master = <&dailink_master_analog>;
+ frame-master = <&dailink_master_analog>;
+ mclk-fs = <256>;
+
+ dailink_master_analog: cpu {
+ sound-dai = <&ssp_dai0>;
+ };
+
+ codec {
+ sound-dai = <&cs4270>;
+ };
+ };
+
+ simple-audio-card,dai-link@1 {
+ reg = <1>;
+ format = "i2s";
+ bitclock-master = <&dailink_master_digital>;
+ frame-master = <&dailink_master_digital>;
+ mclk-fs = <256>;
+
+ dailink_master_digital: cpu {
+ sound-dai = <&ssp_dai1>;
+ };
+
+ codec {
+ sound-dai = <&ak4104>;
+ };
+ };
+ };
+};
+
+&ssp1 {
+ status = "okay";
+};
+
+&ssp2 {
+ status = "okay";
+};
+
+&spi {
+ ak4104: optical-transmitter@0 {
+ compatible = "asahi-kasei,ak4104";
+ reg = <0>;
+ vdd-supply = <®_3v3>;
+ spi-max-frequency = <5000000>;
+ reset-gpios = <&gpio 38 GPIO_ACTIVE_HIGH>;
+ #sound-dai-cells = <0>;
+ };
+};
+
+&rotary {
+ status = "disabled";
+};
diff --git a/src/arm/intel/pxa/pxa300-raumfeld-controller.dts b/src/arm/intel/pxa/pxa300-raumfeld-controller.dts
new file mode 100644
index 0000000..12b1594
--- /dev/null
+++ b/src/arm/intel/pxa/pxa300-raumfeld-controller.dts
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+
+/ {
+ model = "Raumfeld Controller (PXA3xx)";
+ compatible = "raumfeld,raumfeld-controller-pxa303", "marvell,pxa300";
+
+ reg_vbatt: regulator-vbatt {
+ compatible = "regulator-fixed";
+ regulator-name = "vbatt-fixed-supply";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ };
+
+ lcd_supply: regulator-va-tft {
+ compatible = "regulator-fixed";
+ regulator-name = "va-tft-fixed-supply";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ onewire {
+ compatible = "w1-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&w1_pins>;
+ gpios = <
+ &gpio 126 GPIO_OPEN_DRAIN /* W1 I/O */
+ &gpio 105 GPIO_ACTIVE_HIGH /* pullup */
+ >;
+
+ w1_ds2760: slave-ds2760 {
+ compatible = "maxim,ds2760";
+ power-supplies = <&charger>;
+ };
+ };
+
+ charger: charger {
+ pinctrl-names = "default";
+ pinctrl-0 = <&charger_pins>;
+ compatible = "gpio-charger";
+ charger-type = "mains";
+ gpios = <&gpio 101 GPIO_ACTIVE_LOW>;
+ };
+
+ /*
+ * One of the following two will be set to "okay" by the bootloader,
+ * depending on the hardware revision.
+ */
+ backlight-controller-pwm {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pins>;
+ pwms = <&pwm0 10000>;
+ power-supply = <®_vbatt>;
+ status = "disabled";
+
+ brightness-levels = <
+ 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100
+ >;
+ default-brightness-level = <100>;
+ };
+
+ backlight-controller {
+ compatible = "lltc,lt3593";
+ pinctrl-names = "default";
+ pinctrl-0 = <<3593_pins>;
+ lltc,ctrl-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+
+ led {
+ label = "backlight";
+ default-state = "on";
+ };
+ };
+};
+
+®_va_5v0 {
+ status = "disabled";
+};
+
+ðernet {
+ status = "disabled";
+};
+
+&leds {
+ status = "disabled";
+};
+
+&dac {
+ status = "disabled";
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&keys {
+ pinctrl-0 = <&gpio_keys_pins &dock_detect_pins>;
+ dock-detect {
+ label = "dock detect";
+ gpios = <&gpio 116 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_F5>;
+ };
+};
+
+&spi {
+ accelerometer@1 {
+ compatible = "st,lis302dl-spi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lis302_pins>;
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ interrupt-parent = <&gpio>;
+ interrupts = <104 IRQ_TYPE_EDGE_FALLING>;
+
+ st,click-single-x;
+ st,click-single-y;
+ st,click-single-z;
+ st,click-thresh-x = <10>;
+ st,click-thresh-y = <10>;
+ st,click-thresh-z = <10>;
+ st,irq1-click;
+ st,irq2-click;
+ st,wakeup-x-lo;
+ st,wakeup-x-hi;
+ st,wakeup-y-lo;
+ st,wakeup-y-hi;
+ st,wakeup-z-lo;
+ st,wakeup-z-hi;
+ };
+};
+
+&lcdc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdc_pins>;
+ lcd-supply = <&lcd_supply>;
+
+ port {
+ lcdc_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ bus-width = <16>;
+ };
+ };
+
+ panel {
+ compatible = "sharp,lq043t3dx0-panel";
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing {
+ clock-frequency = <9009000>;
+ pixelclk-active = <0>; /* negative edge */
+ hactive = <480>;
+ vactive = <272>;
+ hsync-len = <41>;
+ hback-porch = <2>;
+ hfront-porch = <1>;
+ vsync-len = <10>;
+ vback-porch = <3>;
+ vfront-porch = <1>;
+ };
+ };
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lcdc_out>;
+ };
+ };
+ };
+};
+
+&gcu {
+ status = "okay";
+};
+
+&pxai2c1 {
+ touchscreen@a {
+ compatible = "eeti,exc3000-i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&eeti_ts_pins>;
+ reg = <0xa>;
+ interrupt-parent = <&gpio>;
+ interrupts = <32 IRQ_TYPE_EDGE_RISING>;
+ attn-gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
+ touchscreen-inverted-y;
+ };
+};
+
+&pinctrl {
+ lis302_pins: lis302-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(104) MFP_AF0 /* IRQ */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+
+ eeti_ts_pins: eeti-ts-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(32) MFP_AF0 /* IRQ */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+ };
+
+ lt3593_pins: lt3593-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(17) MFP_AF0 /* Backlight */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+
+ pwm0_pins: pwm0-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(17) MFP_AF1 /* PWM */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+
+ w1_pins: w1-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(126) MFP_AF0 /* PWM */
+ MFP_PIN_PXA300(105) MFP_AF0 /* PWM */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+ };
+
+ charger_pins: charger_pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(31) MFP_AF0 /* PEN2 */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
+ pinctrl-single,bias-pullup = MPF_PULL_UP;
+ };
+
+ dock_detect_pins: dock_detect_pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(116) MFP_AF0 /* DOCK_DETECT */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
+ pinctrl-single,bias-pullup = MPF_PULL_UP;
+ };
+
+ lcdc_pins: lcdc-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(54) MFP_AF1 /* LDD_0 */
+ MFP_PIN_PXA300(55) MFP_AF1 /* LDD_1 */
+ MFP_PIN_PXA300(56) MFP_AF1 /* LDD_2 */
+ MFP_PIN_PXA300(57) MFP_AF1 /* LDD_3 */
+ MFP_PIN_PXA300(58) MFP_AF1 /* LDD_4 */
+ MFP_PIN_PXA300(59) MFP_AF1 /* LDD_5 */
+ MFP_PIN_PXA300(60) MFP_AF1 /* LDD_6 */
+ MFP_PIN_PXA300(61) MFP_AF1 /* LDD_7 */
+ MFP_PIN_PXA300(62) MFP_AF1 /* LDD_8 */
+ MFP_PIN_PXA300(63) MFP_AF1 /* LDD_9 */
+ MFP_PIN_PXA300(64) MFP_AF1 /* LDD_10 */
+ MFP_PIN_PXA300(65) MFP_AF1 /* LDD_11 */
+ MFP_PIN_PXA300(66) MFP_AF1 /* LDD_12 */
+ MFP_PIN_PXA300(67) MFP_AF1 /* LDD_13 */
+ MFP_PIN_PXA300(68) MFP_AF1 /* LDD_14 */
+ MFP_PIN_PXA300(69) MFP_AF1 /* LDD_15 */
+ MFP_PIN_PXA300(70) MFP_AF1 /* LDD_16 */
+ MFP_PIN_PXA300(71) MFP_AF1 /* LDD_17 */
+ MFP_PIN_PXA300(72) MFP_AF1 /* LCD_FCLK */
+ MFP_PIN_PXA300(73) MFP_AF1 /* LCD_LCLK */
+ MFP_PIN_PXA300(74) MFP_AF1 /* LCD_PCLK */
+ MFP_PIN_PXA300(75) MFP_AF1 /* LCD_BIAS */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+};
diff --git a/src/arm/intel/pxa/pxa300-raumfeld-speaker-l.dts b/src/arm/intel/pxa/pxa300-raumfeld-speaker-l.dts
new file mode 100644
index 0000000..5a0f7f1
--- /dev/null
+++ b/src/arm/intel/pxa/pxa300-raumfeld-speaker-l.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+#include "pxa300-raumfeld-tuneable-clock.dtsi"
+
+/ {
+ model = "Raumfeld Speaker L (PXA3xx)";
+ compatible = "raumfeld,raumfeld-speaker-l-pxa303", "marvell,pxa300";
+};
diff --git a/src/arm/intel/pxa/pxa300-raumfeld-speaker-m.dts b/src/arm/intel/pxa/pxa300-raumfeld-speaker-m.dts
new file mode 100644
index 0000000..fa10d89
--- /dev/null
+++ b/src/arm/intel/pxa/pxa300-raumfeld-speaker-m.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+#include "pxa300-raumfeld-tuneable-clock.dtsi"
+
+/ {
+ model = "Raumfeld Speaker M (PXA3xx)";
+ compatible = "raumfeld,raumfeld-speaker-m-pxa303", "marvell,pxa300";
+};
diff --git a/src/arm/intel/pxa/pxa300-raumfeld-speaker-one.dts b/src/arm/intel/pxa/pxa300-raumfeld-speaker-one.dts
new file mode 100644
index 0000000..a70560a
--- /dev/null
+++ b/src/arm/intel/pxa/pxa300-raumfeld-speaker-one.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+
+/ {
+ model = "Raumfeld Speaker One (PXA3xx)";
+ compatible = "raumfeld,raumfeld-speaker-one-pxa303", "marvell,pxa300";
+
+ wm8782: wm8782 {
+ compatible = "wm8782";
+ #sound-dai-cells = <0>;
+ Vdd-supply = <®_3v3>;
+ Vdda-supply = <®_va_5v0>;
+ };
+
+ xo_11mhz: oscillator-11mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <11289600>;
+ clock-accuracy = <100>;
+ };
+
+ xo_audio: clock-gate {
+ compatible = "gpio-gate-clock";
+ pinctrlnames = "default";
+ pinctrl-0 = <&xo_audio_pins>;
+ clocks = <&xo_11mhz>;
+ #clock-cells = <0>;
+ enable-gpios = <&gpio 111 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_va_30v0: regulator-va-30v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "va-30v0-fixed-supply";
+ regulator-min-microvolt = <30000000>;
+ regulator-max-microvolt = <30000000>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "Raumfeld Speaker";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ simple-audio-card,dai-link@0 {
+ reg = <0>;
+ format = "i2s";
+ bitclock-master = <&dailink_master_analog_out>;
+ frame-master = <&dailink_master_analog_out>;
+ mclk-fs = <256>;
+
+ dailink_master_analog_out: cpu {
+ sound-dai = <&ssp_dai0>;
+ };
+
+ codec {
+ sound-dai = <&sta320>;
+ };
+ };
+
+ simple-audio-card,dai-link@1 {
+ reg = <1>;
+ format = "i2s";
+ bitclock-master = <&dailink_master_analog_in>;
+ frame-master = <&dailink_master_analog_in>;
+ mclk-fs = <256>;
+
+ dailink_master_analog_in: cpu {
+ sound-dai = <&ssp_dai0>;
+ };
+
+ codec {
+ sound-dai = <&wm8782>;
+ };
+ };
+ };
+};
+
+&ssp_dai0 {
+ clocks = <&xo_audio>;
+};
+
+&spi {
+ dac@2 {
+ compatible = "ti,dac7512";
+ reg = <2>;
+ spi-max-frequency = <1000000>;
+ vcc-supply = <®_3v3>;
+ };
+};
+
+&rotary {
+ status = "okay";
+};
+
+&pxai2c1 {
+ sta320: codec@1a {
+ compatible = "st,sta32x";
+ reg = <0x1a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sta320_pins>;
+ clocks = <&xo_audio>;
+ clock-names = "xti";
+ reset-gpios = <&gpio 120 GPIO_ACTIVE_HIGH>;
+ Vdda-supply = <®_3v3>;
+ Vdd3-supply = <®_3v3>;
+ Vcc-supply = <®_va_30v0>;
+ #sound-dai-cells = <0>;
+ st,thermal-warning-adjustment;
+ st,thermal-warning-recovery;
+ st,fault-detect-recovery;
+ st,drop-compensation-ns = <80>;
+ st,max-power-use-mpcc;
+ st,invalid-input-detect-mute;
+ /* 2 (half-bridge) and 1 (full-bridge) on-board power */
+ st,output-conf = /bits/ 8 <0x1>;
+ st,ch1-output-mapping = /bits/ 8 <0>;
+ st,ch2-output-mapping = /bits/ 8 <1>;
+ st,ch3-output-mapping = /bits/ 8 <2>;
+ st,needs_esd_watchdog;
+ };
+};
+
+&pinctrl {
+ xo_audio_pins: xo-audio-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(111) MFP_AF0 /* ENABLE */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+
+ sta320_pins: sta320-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(120) MFP_AF0 /* CODEC_RESET */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+ };
+};
diff --git a/src/arm/intel/pxa/pxa300-raumfeld-speaker-s.dts b/src/arm/intel/pxa/pxa300-raumfeld-speaker-s.dts
new file mode 100644
index 0000000..36e20cb
--- /dev/null
+++ b/src/arm/intel/pxa/pxa300-raumfeld-speaker-s.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+#include "pxa300-raumfeld-tuneable-clock.dtsi"
+
+/ {
+ model = "Raumfeld Speaker S (PXA3xx)";
+ compatible = "raumfeld,raumfeld-speaker-s-pxa303", "marvell,pxa300";
+};
diff --git a/src/arm/intel/pxa/pxa300-raumfeld-tuneable-clock.dtsi b/src/arm/intel/pxa/pxa300-raumfeld-tuneable-clock.dtsi
new file mode 100644
index 0000000..561483b
--- /dev/null
+++ b/src/arm/intel/pxa/pxa300-raumfeld-tuneable-clock.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/clock/maxim,max9485.h>
+
+/ {
+ xo_27mhz: oscillator-27mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ clock-accuracy = <100>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "Raumfeld Speaker";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ simple-audio-card,dai-link@0 {
+ reg = <0>;
+ format = "i2s";
+ bitclock-master = <&dailink_master_analog>;
+ frame-master = <&dailink_master_analog>;
+ mclk-fs = <256>;
+
+ dailink_master_analog: cpu {
+ sound-dai = <&ssp_dai0>;
+ };
+
+ codec {
+ sound-dai = <&cs4270>;
+ };
+ };
+ };
+};
+
+&ssp_dai0 {
+ clocks = <&max9485 MAX9485_CLKOUT1>;
+};
+
+&ssp_dai1 {
+ clocks = <&max9485 MAX9485_CLKOUT1>;
+};
+
+&pxai2c1 {
+ cs4270: codec@48 {
+ compatible = "cirrus,cs4270";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cs4270_pins>;
+ reg = <0x48>;
+ va-supply = <®_va_5v0>;
+ vd-supply = <®_3v3>;
+ vlc-supply = <®_3v3>;
+ reset-gpios = <&gpio 120 GPIO_ACTIVE_HIGH>;
+ #sound-dai-cells = <0>;
+ };
+
+ max9485: clock-generator@63 {
+ compatible = "maxim,max9485";
+ pinctrl-names = "default";
+ pinctrl-0 = <&max9485_pins>;
+ reg = <0x63>;
+ vdd-supply = <®_3v3>;
+ clock-names = "xclk";
+ clocks = <&xo_27mhz>;
+ reset-gpios = <&gpio 111 GPIO_ACTIVE_HIGH>;
+ #clock-cells = <1>;
+ };
+};
+
+&pinctrl {
+ cs4270_pins: cs4270-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(120) MFP_AF0 /* RESET */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+
+ max9485_pins: max9485-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(111) MFP_AF0 /* RESET */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+};
diff --git a/src/arm/intel/pxa/pxa3xx.dtsi b/src/arm/intel/pxa/pxa3xx.dtsi
new file mode 100644
index 0000000..f9c216f
--- /dev/null
+++ b/src/arm/intel/pxa/pxa3xx.dtsi
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: GPL-2.0
+/* The pxa3xx skeleton simply augments the 2xx version */
+#include "pxa2xx.dtsi"
+
+#define MFP_PIN_PXA300(gpio) \
+ ((gpio <= 2) ? (0x00b4 + 4 * gpio) : \
+ (gpio <= 26) ? (0x027c + 4 * (gpio - 3)) : \
+ (gpio <= 98) ? (0x0400 + 4 * (gpio - 27)) : \
+ (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) : \
+ 0)
+#define MFP_PIN_PXA300_2(gpio) \
+ ((gpio <= 1) ? (0x674 + 4 * gpio) : \
+ (gpio <= 6) ? (0x2dc + 4 * gpio) : \
+ 0)
+
+#define MFP_PIN_PXA310(gpio) \
+ ((gpio <= 2) ? (0x00b4 + 4 * gpio) : \
+ (gpio <= 26) ? (0x027c + 4 * (gpio - 3)) : \
+ (gpio <= 29) ? (0x0400 + 4 * (gpio - 27)) : \
+ (gpio <= 98) ? (0x0418 + 4 * (gpio - 30)) : \
+ (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) : \
+ (gpio <= 262) ? 0 : \
+ (gpio <= 268) ? (0x052c + 4 * (gpio - 263)) : \
+ 0)
+#define MFP_PIN_PXA310_2(gpio) \
+ ((gpio <= 1) ? (0x674 + 4 * gpio) : \
+ (gpio <= 6) ? (0x2dc + 4 * gpio) : \
+ (gpio <= 10) ? (0x52c + 4 * gpio) : \
+ 0)
+
+#define MFP_PIN_PXA320(gpio) \
+ ((gpio <= 4) ? (0x0124 + 4 * gpio) : \
+ (gpio <= 9) ? (0x028c + 4 * (gpio - 5)) : \
+ (gpio <= 10) ? (0x0458 + 4 * (gpio - 10)) : \
+ (gpio <= 26) ? (0x02a0 + 4 * (gpio - 11)) : \
+ (gpio <= 48) ? (0x0400 + 4 * (gpio - 27)) : \
+ (gpio <= 62) ? (0x045c + 4 * (gpio - 49)) : \
+ (gpio <= 73) ? (0x04b4 + 4 * (gpio - 63)) : \
+ (gpio <= 98) ? (0x04f0 + 4 * (gpio - 74)) : \
+ (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) : \
+ 0)
+#define MFP_PIN_PXA320_2(gpio) \
+ ((gpio <= 3) ? (0x674 + 4 * gpio) : \
+ (gpio <= 5) ? (0x284 + 4 * gpio) : \
+ 0)
+
+/*
+ * MFP Alternate functions for pins having a gpio.
+ * Example of use: pinctrl-single,pins = < MFP_PIN_PXA310(21) MFP_AF1 >
+ */
+#define MFP_AF0 (0 << 0)
+#define MFP_AF1 (1 << 0)
+#define MFP_AF2 (2 << 0)
+#define MFP_AF3 (3 << 0)
+#define MFP_AF4 (4 << 0)
+#define MFP_AF5 (5 << 0)
+#define MFP_AF6 (6 << 0)
+
+/*
+ * MFP drive strength functions for pins.
+ * Example of use: pinctrl-single,drive-strength = MFP_DS03X;
+ */
+#define MFP_DSMSK (0x7 << 10)
+#define MFP_DS01X < (0x0 << 10) MFP_DSMSK >
+#define MFP_DS02X < (0x1 << 10) MFP_DSMSK >
+#define MFP_DS03X < (0x2 << 10) MFP_DSMSK >
+#define MFP_DS04X < (0x3 << 10) MFP_DSMSK >
+#define MFP_DS06X < (0x4 << 10) MFP_DSMSK >
+#define MFP_DS08X < (0x5 << 10) MFP_DSMSK >
+#define MFP_DS10X < (0x6 << 10) MFP_DSMSK >
+#define MFP_DS13X < (0x7 << 10) MFP_DSMSK >
+
+/*
+ * MFP bias pull mode for pins.
+ * Example of use: pinctrl-single,bias-pullup = MPF_PULL_UP;
+ */
+#define MPF_PULL_MSK (0x7 << 13)
+#define MPF_PULL_DOWN < (0x5 << 13) (0x5 << 13) 0 MPF_PULL_MSK >
+#define MPF_PULL_UP < (0x6 << 13) (0x6 << 13) 0 MPF_PULL_MSK >
+
+/*
+ * MFP low power mode for pins.
+ * Example of use:
+ * pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW|MFP_LPM_EDGE_FALL);
+ *
+ * Table that determines the low power modes outputs, with actual settings
+ * used in parentheses for don't-care values. Except for the float output,
+ * the configured driven and pulled levels match, so if there is a need for
+ * non-LPM pulled output, the same configuration could probably be used.
+ *
+ * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel
+ * (bit 7) (bit 8) (bit 14) (bit 13) (bit 15)
+ *
+ * Input 0 X(0) X(0) X(0) 0
+ * Drive 0 0 0 0 X(1) 0
+ * Drive 1 0 1 X(1) 0 0
+ * Pull hi (1) 1 X(1) 1 0 0
+ * Pull lo (0) 1 X(0) 0 1 0
+ * Z (float) 1 X(0) 0 0 0
+ */
+#define MFP_LPM(x) < (x) MFP_LPM_MSK >
+
+#define MFP_LPM_MSK 0xe1f0
+#define MFP_LPM_INPUT 0x0000
+#define MFP_LPM_DRIVE_LOW 0x2000
+#define MFP_LPM_DRIVE_HIGH 0x4100
+#define MFP_LPM_PULL_LOW 0x2080
+#define MFP_LPM_PULL_HIGH 0x4180
+#define MFP_LPM_FLOAT 0x0080
+
+#define MFP_LPM_EDGE_NONE 0x0000
+#define MFP_LPM_EDGE_RISE 0x0010
+#define MFP_LPM_EDGE_FALL 0x0020
+#define MFP_LPM_EDGE_BOTH 0x0030
+
+/ {
+ model = "Marvell PXA3xx familiy SoC";
+ compatible = "marvell,pxa3xx";
+
+ pxabus {
+ pdma: dma-controller@40000000 {
+ compatible = "marvell,pdma-1.0";
+ reg = <0x40000000 0x10000>;
+ interrupts = <25>;
+ #dma-cells = <2>;
+ /* For backwards compatibility: */
+ #dma-channels = <32>;
+ dma-channels = <32>;
+ #dma-requests = <100>;
+ dma-requests = <100>;
+ status = "okay";
+ };
+
+ pwri2c: i2c@40f500c0 {
+ compatible = "mrvl,pwri2c";
+ reg = <0x40f500c0 0x30>;
+ interrupts = <6>;
+ clocks = <&clks CLK_PWRI2C>;
+ #address-cells = <0x1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ nand_controller: nand-controller@43100000 {
+ compatible = "marvell,pxa3xx-nand-controller";
+ reg = <0x43100000 90>;
+ interrupts = <45>;
+ clocks = <&clks CLK_NAND>;
+ clock-names = "core";
+ dmas = <&pdma 97 3>;
+ dma-names = "data";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ pxairq: interrupt-controller@40d00000 {
+ marvell,intc-priority;
+ marvell,intc-nr-irqs = <56>;
+ };
+
+ pinctrl: pinctrl@40e10000 {
+ compatible = "pinconf-single";
+ reg = <0x40e10000 0xffff>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x7>;
+ };
+
+ gpio: gpio@40e00000 {
+ compatible = "intel,pxa3xx-gpio";
+ reg = <0x40e00000 0x10000>;
+ clocks = <&clks CLK_GPIO>;
+ gpio-ranges = <&pinctrl 0 0 128>;
+ interrupt-names = "gpio0", "gpio1", "gpio_mux";
+ interrupts = <8>, <9>, <10>;
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ mmc0: mmc@41100000 {
+ compatible = "marvell,pxa-mmc";
+ reg = <0x41100000 0x1000>;
+ interrupts = <23>;
+ clocks = <&clks CLK_MMC1>;
+ dmas = <&pdma 21 3
+ &pdma 22 3>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ mmc1: mmc@42000000 {
+ compatible = "marvell,pxa-mmc";
+ reg = <0x42000000 0x1000>;
+ interrupts = <41>;
+ clocks = <&clks CLK_MMC2>;
+ dmas = <&pdma 93 3
+ &pdma 94 3>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ mmc2: mmc@42500000 {
+ compatible = "marvell,pxa-mmc";
+ reg = <0x42500000 0x1000>;
+ interrupts = <55>;
+ clocks = <&clks CLK_MMC3>;
+ dmas = <&pdma 46 3
+ &pdma 47 3>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ usb0: usb@4c000000 {
+ compatible = "marvell,pxa-ohci";
+ reg = <0x4c000000 0x10000>;
+ interrupts = <3>;
+ clocks = <&clks CLK_USBH>;
+ status = "disabled";
+ };
+
+ pwm0: pwm@40b00000 {
+ compatible = "marvell,pxa270-pwm";
+ reg = <0x40b00000 0x10>;
+ #pwm-cells = <1>;
+ clocks = <&clks CLK_PWM0>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@40b00010 {
+ compatible = "marvell,pxa270-pwm";
+ reg = <0x40b00010 0x10>;
+ #pwm-cells = <1>;
+ clocks = <&clks CLK_PWM1>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@40c00000 {
+ compatible = "marvell,pxa270-pwm";
+ reg = <0x40c00000 0x10>;
+ #pwm-cells = <1>;
+ clocks = <&clks CLK_PWM0>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@40c00010 {
+ compatible = "marvell,pxa270-pwm";
+ reg = <0x40c00010 0x10>;
+ #pwm-cells = <1>;
+ clocks = <&clks CLK_PWM1>;
+ status = "disabled";
+ };
+
+ ssp1: ssp@41000000 {
+ compatible = "mrvl,pxa3xx-ssp";
+ reg = <0x41000000 0x40>;
+ interrupts = <24>;
+ clocks = <&clks CLK_SSP1>;
+ status = "disabled";
+ };
+
+ ssp2: ssp@41700000 {
+ compatible = "mrvl,pxa3xx-ssp";
+ reg = <0x41700000 0x40>;
+ interrupts = <16>;
+ clocks = <&clks CLK_SSP2>;
+ status = "disabled";
+ };
+
+ ssp3: ssp@41900000 {
+ compatible = "mrvl,pxa3xx-ssp";
+ reg = <0x41900000 0x40>;
+ interrupts = <0>;
+ clocks = <&clks CLK_SSP3>;
+ status = "disabled";
+ };
+
+ ssp4: ssp@41a00000 {
+ compatible = "mrvl,pxa3xx-ssp";
+ reg = <0x41a00000 0x40>;
+ interrupts = <13>;
+ clocks = <&clks CLK_SSP4>;
+ status = "disabled";
+ };
+
+ timer@40a00000 {
+ compatible = "marvell,pxa-timer";
+ reg = <0x40a00000 0x20>;
+ interrupts = <26>;
+ clocks = <&clks CLK_OSTIMER>;
+ status = "okay";
+ };
+
+ gcu: display-controller@54000000 {
+ compatible = "marvell,pxa300-gcu";
+ reg = <0x54000000 0x1000>;
+ interrupts = <39>;
+ clocks = <&clks CLK_PXA300_GCU>;
+ status = "disabled";
+ };
+ };
+
+ clocks {
+ /*
+ * The muxing of external clocks/internal dividers for osc* clock
+ * sources has been hidden under the carpet by now.
+ */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clks: clocks {
+ compatible = "marvell,pxa300-clocks";
+ #clock-cells = <1>;
+ status = "okay";
+ };
+ };
+};
diff --git a/src/arm/intel/socfpga/socfpga.dtsi b/src/arm/intel/socfpga/socfpga.dtsi
new file mode 100644
index 0000000..4c1d140
--- /dev/null
+++ b/src/arm/intel/socfpga/socfpga.dtsi
@@ -0,0 +1,984 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 Altera <www.altera.com>
+ */
+
+#include <dt-bindings/reset/altr,rst-mgr.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ timer0 = &timer0;
+ timer1 = &timer1;
+ timer2 = &timer2;
+ timer3 = &timer3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "altr,socfpga-smp";
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ pmu: pmu@ff111000 {
+ compatible = "arm,cortex-a9-pmu";
+ interrupt-parent = <&intc>;
+ interrupts = <0 176 4>, <0 177 4>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ reg = <0xff111000 0x1000>,
+ <0xff113000 0x1000>;
+ };
+
+ intc: interrupt-controller@fffed000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0xfffed000 0x1000>,
+ <0xfffec100 0x100>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ device_type = "soc";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ amba {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pdma: pdma@ffe01000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0xffe01000 0x1000>;
+ interrupts = <0 104 4>,
+ <0 105 4>,
+ <0 106 4>,
+ <0 107 4>,
+ <0 108 4>,
+ <0 109 4>,
+ <0 110 4>,
+ <0 111 4>;
+ #dma-cells = <1>;
+ clocks = <&l4_main_clk>;
+ clock-names = "apb_pclk";
+ resets = <&rst DMA_RESET>;
+ reset-names = "dma";
+ };
+ };
+
+ base_fpga_region {
+ compatible = "fpga-region";
+ fpga-mgr = <&fpgamgr0>;
+
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ };
+
+ can0: can@ffc00000 {
+ compatible = "bosch,d_can";
+ reg = <0xffc00000 0x1000>;
+ interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>;
+ clocks = <&can0_clk>;
+ resets = <&rst CAN0_RESET>;
+ status = "disabled";
+ };
+
+ can1: can@ffc01000 {
+ compatible = "bosch,d_can";
+ reg = <0xffc01000 0x1000>;
+ interrupts = <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>;
+ clocks = <&can1_clk>;
+ resets = <&rst CAN1_RESET>;
+ status = "disabled";
+ };
+
+ clkmgr@ffd04000 {
+ compatible = "altr,clk-mgr";
+ reg = <0xffd04000 0x1000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc1: osc1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ osc2: osc2 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ f2s_periph_ref_clk: f2s_periph_ref_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ f2s_sdram_ref_clk: f2s_sdram_ref_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ main_pll: main_pll@40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-pll-clock";
+ clocks = <&osc1>;
+ reg = <0x40>;
+
+ mpuclk: mpuclk@48 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&main_pll>;
+ div-reg = <0xe0 0 9>;
+ reg = <0x48>;
+ };
+
+ mainclk: mainclk@4c {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&main_pll>;
+ div-reg = <0xe4 0 9>;
+ reg = <0x4C>;
+ };
+
+ dbg_base_clk: dbg_base_clk@50 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&main_pll>, <&osc1>;
+ div-reg = <0xe8 0 9>;
+ reg = <0x50>;
+ };
+
+ main_qspi_clk: main_qspi_clk@54 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x54>;
+ };
+
+ main_nand_sdmmc_clk: main_nand_sdmmc_clk@58 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x58>;
+ };
+
+ cfg_h2f_usr0_clk: cfg_h2f_usr0_clk@5c {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x5C>;
+ };
+ };
+
+ periph_pll: periph_pll@80 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-pll-clock";
+ clocks = <&osc1>, <&osc2>, <&f2s_periph_ref_clk>;
+ reg = <0x80>;
+
+ emac0_clk: emac0_clk@88 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0x88>;
+ };
+
+ emac1_clk: emac1_clk@8c {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0x8C>;
+ };
+
+ per_qspi_clk: per_qsi_clk@90 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0x90>;
+ };
+
+ per_nand_mmc_clk: per_nand_mmc_clk@94 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0x94>;
+ };
+
+ per_base_clk: per_base_clk@98 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0x98>;
+ };
+
+ h2f_usr1_clk: h2f_usr1_clk@9c {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0x9C>;
+ };
+ };
+
+ sdram_pll: sdram_pll@c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-pll-clock";
+ clocks = <&osc1>, <&osc2>, <&f2s_sdram_ref_clk>;
+ reg = <0xC0>;
+
+ ddr_dqs_clk: ddr_dqs_clk@c8 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&sdram_pll>;
+ reg = <0xC8>;
+ };
+
+ ddr_2x_dqs_clk: ddr_2x_dqs_clk@cc {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&sdram_pll>;
+ reg = <0xCC>;
+ };
+
+ ddr_dq_clk: ddr_dq_clk@d0 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&sdram_pll>;
+ reg = <0xD0>;
+ };
+
+ h2f_usr2_clk: h2f_usr2_clk@d4 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&sdram_pll>;
+ reg = <0xD4>;
+ };
+ };
+
+ mpu_periph_clk: mpu_periph_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&mpuclk>;
+ fixed-divider = <4>;
+ };
+
+ mpu_l2_ram_clk: mpu_l2_ram_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&mpuclk>;
+ fixed-divider = <2>;
+ };
+
+ l4_main_clk: l4_main_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&mainclk>;
+ clk-gate = <0x60 0>;
+ };
+
+ l3_main_clk: l3_main_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-perip-clk";
+ clocks = <&mainclk>;
+ fixed-divider = <1>;
+ };
+
+ l3_mp_clk: l3_mp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&mainclk>;
+ div-reg = <0x64 0 2>;
+ clk-gate = <0x60 1>;
+ };
+
+ l3_sp_clk: l3_sp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&l3_mp_clk>;
+ div-reg = <0x64 2 2>;
+ };
+
+ l4_mp_clk: l4_mp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&mainclk>, <&per_base_clk>;
+ div-reg = <0x64 4 3>;
+ clk-gate = <0x60 2>;
+ };
+
+ l4_sp_clk: l4_sp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&mainclk>, <&per_base_clk>;
+ div-reg = <0x64 7 3>;
+ clk-gate = <0x60 3>;
+ };
+
+ dbg_at_clk: dbg_at_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&dbg_base_clk>;
+ div-reg = <0x68 0 2>;
+ clk-gate = <0x60 4>;
+ };
+
+ dbg_clk: dbg_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&dbg_at_clk>;
+ div-reg = <0x68 2 2>;
+ clk-gate = <0x60 5>;
+ };
+
+ dbg_trace_clk: dbg_trace_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&dbg_base_clk>;
+ div-reg = <0x6C 0 3>;
+ clk-gate = <0x60 6>;
+ };
+
+ dbg_timer_clk: dbg_timer_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&dbg_base_clk>;
+ clk-gate = <0x60 7>;
+ };
+
+ cfg_clk: cfg_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&cfg_h2f_usr0_clk>;
+ clk-gate = <0x60 8>;
+ };
+
+ h2f_user0_clk: h2f_user0_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&cfg_h2f_usr0_clk>;
+ clk-gate = <0x60 9>;
+ };
+
+ emac_0_clk: emac_0_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&emac0_clk>;
+ clk-gate = <0xa0 0>;
+ };
+
+ emac_1_clk: emac_1_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&emac1_clk>;
+ clk-gate = <0xa0 1>;
+ };
+
+ usb_mp_clk: usb_mp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&per_base_clk>;
+ clk-gate = <0xa0 2>;
+ div-reg = <0xa4 0 3>;
+ };
+
+ spi_m_clk: spi_m_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&per_base_clk>;
+ clk-gate = <0xa0 3>;
+ div-reg = <0xa4 3 3>;
+ };
+
+ can0_clk: can0_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&per_base_clk>;
+ clk-gate = <0xa0 4>;
+ div-reg = <0xa4 6 3>;
+ };
+
+ can1_clk: can1_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&per_base_clk>;
+ clk-gate = <0xa0 5>;
+ div-reg = <0xa4 9 3>;
+ };
+
+ gpio_db_clk: gpio_db_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&per_base_clk>;
+ clk-gate = <0xa0 6>;
+ div-reg = <0xa8 0 24>;
+ };
+
+ h2f_user1_clk: h2f_user1_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&h2f_usr1_clk>;
+ clk-gate = <0xa0 7>;
+ };
+
+ sdmmc_clk: sdmmc_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+ clk-gate = <0xa0 8>;
+ };
+
+ sdmmc_clk_divided: sdmmc_clk_divided {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&sdmmc_clk>;
+ clk-gate = <0xa0 8>;
+ fixed-divider = <4>;
+ };
+
+ nand_x_clk: nand_x_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+ clk-gate = <0xa0 9>;
+ };
+
+ nand_ecc_clk: nand_ecc_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&nand_x_clk>;
+ clk-gate = <0xa0 9>;
+ };
+
+ nand_clk: nand_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&nand_x_clk>;
+ clk-gate = <0xa0 10>;
+ fixed-divider = <4>;
+ };
+
+ qspi_clk: qspi_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>;
+ clk-gate = <0xa0 11>;
+ };
+
+ ddr_dqs_clk_gate: ddr_dqs_clk_gate {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&ddr_dqs_clk>;
+ clk-gate = <0xd8 0>;
+ };
+
+ ddr_2x_dqs_clk_gate: ddr_2x_dqs_clk_gate {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&ddr_2x_dqs_clk>;
+ clk-gate = <0xd8 1>;
+ };
+
+ ddr_dq_clk_gate: ddr_dq_clk_gate {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&ddr_dq_clk>;
+ clk-gate = <0xd8 2>;
+ };
+
+ h2f_user2_clk: h2f_user2_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&h2f_usr2_clk>;
+ clk-gate = <0xd8 3>;
+ };
+
+ };
+ };
+
+ fpga_bridge0: fpga_bridge@ff400000 {
+ compatible = "altr,socfpga-lwhps2fpga-bridge";
+ reg = <0xff400000 0x100000>;
+ resets = <&rst LWHPS2FPGA_RESET>;
+ clocks = <&l4_main_clk>;
+ status = "disabled";
+ };
+
+ fpga_bridge1: fpga_bridge@ff500000 {
+ compatible = "altr,socfpga-hps2fpga-bridge";
+ reg = <0xff500000 0x10000>;
+ resets = <&rst HPS2FPGA_RESET>;
+ clocks = <&l4_main_clk>;
+ status = "disabled";
+ };
+
+ fpga_bridge2: fpga-bridge@ff600000 {
+ compatible = "altr,socfpga-fpga2hps-bridge";
+ reg = <0xff600000 0x100000>;
+ resets = <&rst FPGA2HPS_RESET>;
+ clocks = <&l4_main_clk>;
+ status = "disabled";
+ };
+
+ fpga_bridge3: fpga-bridge@ffc25080 {
+ compatible = "altr,socfpga-fpga2sdram-bridge";
+ reg = <0xffc25080 0x4>;
+ status = "disabled";
+ };
+
+ fpgamgr0: fpgamgr@ff706000 {
+ compatible = "altr,socfpga-fpga-mgr";
+ reg = <0xff706000 0x1000
+ 0xffb90000 0x4>;
+ interrupts = <0 175 4>;
+ };
+
+ socfpga_axi_setup: stmmac-axi-config {
+ snps,wr_osr_lmt = <0xf>;
+ snps,rd_osr_lmt = <0xf>;
+ snps,blen = <0 0 0 0 16 0 0>;
+ };
+
+ gmac0: ethernet@ff700000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
+ altr,sysmgr-syscon = <&sysmgr 0x60 0>;
+ reg = <0xff700000 0x2000>;
+ interrupts = <0 115 4>;
+ interrupt-names = "macirq";
+ mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
+ clocks = <&emac_0_clk>;
+ clock-names = "stmmaceth";
+ resets = <&rst EMAC0_RESET>;
+ reset-names = "stmmaceth";
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ tx-fifo-depth = <4096>;
+ rx-fifo-depth = <4096>;
+ snps,axi-config = <&socfpga_axi_setup>;
+ status = "disabled";
+ };
+
+ gmac1: ethernet@ff702000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
+ altr,sysmgr-syscon = <&sysmgr 0x60 2>;
+ reg = <0xff702000 0x2000>;
+ interrupts = <0 120 4>;
+ interrupt-names = "macirq";
+ mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
+ clocks = <&emac_1_clk>;
+ clock-names = "stmmaceth";
+ resets = <&rst EMAC1_RESET>;
+ reset-names = "stmmaceth";
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ tx-fifo-depth = <4096>;
+ rx-fifo-depth = <4096>;
+ snps,axi-config = <&socfpga_axi_setup>;
+ status = "disabled";
+ };
+
+ gpio0: gpio@ff708000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff708000 0x1000>;
+ clocks = <&l4_mp_clk>;
+ resets = <&rst GPIO0_RESET>;
+ status = "disabled";
+
+ porta: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <29>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 164 4>;
+ };
+ };
+
+ gpio1: gpio@ff709000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff709000 0x1000>;
+ clocks = <&l4_mp_clk>;
+ resets = <&rst GPIO1_RESET>;
+ status = "disabled";
+
+ portb: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <29>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 165 4>;
+ };
+ };
+
+ gpio2: gpio@ff70a000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff70a000 0x1000>;
+ clocks = <&l4_mp_clk>;
+ resets = <&rst GPIO2_RESET>;
+ status = "disabled";
+
+ portc: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <27>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 166 4>;
+ };
+ };
+
+ i2c0: i2c@ffc04000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc04000 0x1000>;
+ resets = <&rst I2C0_RESET>;
+ clocks = <&l4_sp_clk>;
+ interrupts = <0 158 0x4>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@ffc05000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc05000 0x1000>;
+ resets = <&rst I2C1_RESET>;
+ clocks = <&l4_sp_clk>;
+ interrupts = <0 159 0x4>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@ffc06000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc06000 0x1000>;
+ resets = <&rst I2C2_RESET>;
+ clocks = <&l4_sp_clk>;
+ interrupts = <0 160 0x4>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@ffc07000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc07000 0x1000>;
+ resets = <&rst I2C3_RESET>;
+ clocks = <&l4_sp_clk>;
+ interrupts = <0 161 0x4>;
+ status = "disabled";
+ };
+
+ eccmgr: eccmgr {
+ compatible = "altr,socfpga-ecc-manager";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ l2-ecc@ffd08140 {
+ compatible = "altr,socfpga-l2-ecc";
+ reg = <0xffd08140 0x4>;
+ interrupts = <0 36 1>, <0 37 1>;
+ };
+
+ ocram-ecc@ffd08144 {
+ compatible = "altr,socfpga-ocram-ecc";
+ reg = <0xffd08144 0x4>;
+ iram = <&ocram>;
+ interrupts = <0 178 1>, <0 179 1>;
+ };
+ };
+
+ L2: cache-controller@fffef000 {
+ compatible = "arm,pl310-cache";
+ reg = <0xfffef000 0x1000>;
+ interrupts = <0 38 0x04>;
+ cache-unified;
+ cache-level = <2>;
+ arm,tag-latency = <1 1 1>;
+ arm,data-latency = <2 1 1>;
+ prefetch-data = <1>;
+ prefetch-instr = <1>;
+ arm,shared-override;
+ arm,double-linefill = <1>;
+ arm,double-linefill-incr = <0>;
+ arm,double-linefill-wrap = <1>;
+ arm,prefetch-drop = <0>;
+ arm,prefetch-offset = <7>;
+ };
+
+ l3regs@ff800000 {
+ compatible = "altr,l3regs", "syscon";
+ reg = <0xff800000 0x1000>;
+ };
+
+ mmc: mmc@ff704000 {
+ compatible = "altr,socfpga-dw-mshc";
+ reg = <0xff704000 0x1000>;
+ interrupts = <0 139 4>;
+ fifo-depth = <0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
+ clock-names = "biu", "ciu";
+ resets = <&rst SDMMC_RESET>;
+ altr,sysmgr-syscon = <&sysmgr 0x108 3>;
+ status = "disabled";
+ };
+
+ nand0: nand@ff900000 {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ compatible = "altr,socfpga-denali-nand";
+ reg = <0xff900000 0x100000>,
+ <0xffb80000 0x10000>;
+ reg-names = "nand_data", "denali_reg";
+ interrupts = <0x0 0x90 0x4>;
+ clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
+ clock-names = "nand", "nand_x", "ecc";
+ resets = <&rst NAND_RESET>;
+ status = "disabled";
+ };
+
+ ocram: sram@ffff0000 {
+ compatible = "mmio-sram";
+ reg = <0xffff0000 0x10000>;
+ };
+
+ qspi: spi@ff705000 {
+ compatible = "intel,socfpga-qspi", "cdns,qspi-nor";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xff705000 0x1000>,
+ <0xffa00000 0x1000>;
+ interrupts = <0 151 4>;
+ cdns,fifo-depth = <128>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x00000000>;
+ clocks = <&qspi_clk>;
+ resets = <&rst QSPI_RESET>;
+ status = "disabled";
+ };
+
+ rst: rstmgr@ffd05000 {
+ #reset-cells = <1>;
+ compatible = "altr,rst-mgr";
+ reg = <0xffd05000 0x1000>;
+ altr,modrst-offset = <0x10>;
+ };
+
+ scu: snoop-control-unit@fffec000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0xfffec000 0x100>;
+ };
+
+ sdr: sdr@ffc25000 {
+ compatible = "altr,sdr-ctl", "syscon";
+ reg = <0xffc25000 0x1000>;
+ resets = <&rst SDR_RESET>;
+ };
+
+ sdramedac {
+ compatible = "altr,sdram-edac";
+ altr,sdr-syscon = <&sdr>;
+ interrupts = <0 39 4>;
+ };
+
+ spi0: spi@fff00000 {
+ compatible = "snps,dw-apb-ssi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfff00000 0x1000>;
+ interrupts = <0 154 4>;
+ num-cs = <4>;
+ clocks = <&spi_m_clk>;
+ resets = <&rst SPIM0_RESET>;
+ reset-names = "spi";
+ status = "disabled";
+ };
+
+ spi1: spi@fff01000 {
+ compatible = "snps,dw-apb-ssi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfff01000 0x1000>;
+ interrupts = <0 155 4>;
+ num-cs = <4>;
+ clocks = <&spi_m_clk>;
+ resets = <&rst SPIM1_RESET>;
+ reset-names = "spi";
+ status = "disabled";
+ };
+
+ sysmgr: sysmgr@ffd08000 {
+ compatible = "altr,sys-mgr", "syscon";
+ reg = <0xffd08000 0x4000>;
+ };
+
+ /* Local timer */
+ timer@fffec600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xfffec600 0x100>;
+ interrupts = <1 13 0xf01>;
+ clocks = <&mpu_periph_clk>;
+ };
+
+ timer0: timer0@ffc08000 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 167 4>;
+ reg = <0xffc08000 0x1000>;
+ clocks = <&l4_sp_clk>;
+ clock-names = "timer";
+ resets = <&rst SPTIMER0_RESET>;
+ reset-names = "timer";
+ };
+
+ timer1: timer1@ffc09000 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 168 4>;
+ reg = <0xffc09000 0x1000>;
+ clocks = <&l4_sp_clk>;
+ clock-names = "timer";
+ resets = <&rst SPTIMER1_RESET>;
+ reset-names = "timer";
+ };
+
+ timer2: timer2@ffd00000 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 169 4>;
+ reg = <0xffd00000 0x1000>;
+ clocks = <&osc1>;
+ clock-names = "timer";
+ resets = <&rst OSC1TIMER0_RESET>;
+ reset-names = "timer";
+ };
+
+ timer3: timer3@ffd01000 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 170 4>;
+ reg = <0xffd01000 0x1000>;
+ clocks = <&osc1>;
+ clock-names = "timer";
+ resets = <&rst OSC1TIMER1_RESET>;
+ reset-names = "timer";
+ };
+
+ uart0: serial@ffc02000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xffc02000 0x1000>;
+ interrupts = <0 162 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&l4_sp_clk>;
+ dmas = <&pdma 28>,
+ <&pdma 29>;
+ dma-names = "tx", "rx";
+ resets = <&rst UART0_RESET>;
+ };
+
+ uart1: serial@ffc03000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xffc03000 0x1000>;
+ interrupts = <0 163 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&l4_sp_clk>;
+ dmas = <&pdma 30>,
+ <&pdma 31>;
+ dma-names = "tx", "rx";
+ resets = <&rst UART1_RESET>;
+ };
+
+ usbphy0: usbphy {
+ #phy-cells = <0>;
+ compatible = "usb-nop-xceiv";
+ status = "okay";
+ };
+
+ usb0: usb@ffb00000 {
+ compatible = "snps,dwc2";
+ reg = <0xffb00000 0xffff>;
+ interrupts = <0 125 4>;
+ clocks = <&usb_mp_clk>;
+ clock-names = "otg";
+ resets = <&rst USB0_RESET>;
+ reset-names = "dwc2";
+ phys = <&usbphy0>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ usb1: usb@ffb40000 {
+ compatible = "snps,dwc2";
+ reg = <0xffb40000 0xffff>;
+ interrupts = <0 128 4>;
+ clocks = <&usb_mp_clk>;
+ clock-names = "otg";
+ resets = <&rst USB1_RESET>;
+ reset-names = "dwc2";
+ phys = <&usbphy0>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ watchdog0: watchdog@ffd02000 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd02000 0x1000>;
+ interrupts = <0 171 4>;
+ clocks = <&osc1>;
+ resets = <&rst L4WD0_RESET>;
+ status = "disabled";
+ };
+
+ watchdog1: watchdog@ffd03000 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd03000 0x1000>;
+ interrupts = <0 172 4>;
+ clocks = <&osc1>;
+ resets = <&rst L4WD1_RESET>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/src/arm/intel/socfpga/socfpga_arria10.dtsi b/src/arm/intel/socfpga/socfpga_arria10.dtsi
new file mode 100644
index 0000000..f36063c
--- /dev/null
+++ b/src/arm/intel/socfpga/socfpga_arria10.dtsi
@@ -0,0 +1,920 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright Altera Corporation (C) 2014. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/altr,rst-mgr-a10.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "altr,socfpga-a10-smp";
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ pmu: pmu@ff111000 {
+ compatible = "arm,cortex-a9-pmu";
+ interrupt-parent = <&intc>;
+ interrupts = <0 124 4>, <0 125 4>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ reg = <0xff111000 0x1000>,
+ <0xff113000 0x1000>;
+ };
+
+ intc: interrupt-controller@ffffd000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0xffffd000 0x1000>,
+ <0xffffc100 0x100>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ device_type = "soc";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ amba {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pdma: pdma@ffda1000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0xffda1000 0x1000>;
+ interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>,
+ <0 84 IRQ_TYPE_LEVEL_HIGH>,
+ <0 85 IRQ_TYPE_LEVEL_HIGH>,
+ <0 86 IRQ_TYPE_LEVEL_HIGH>,
+ <0 87 IRQ_TYPE_LEVEL_HIGH>,
+ <0 88 IRQ_TYPE_LEVEL_HIGH>,
+ <0 89 IRQ_TYPE_LEVEL_HIGH>,
+ <0 90 IRQ_TYPE_LEVEL_HIGH>,
+ <0 91 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&l4_main_clk>;
+ clock-names = "apb_pclk";
+ resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>;
+ reset-names = "dma", "dma-ocp";
+ };
+ };
+
+ base_fpga_region {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+
+ compatible = "fpga-region";
+ fpga-mgr = <&fpga_mgr>;
+ };
+
+ clkmgr@ffd04000 {
+ compatible = "altr,clk-mgr";
+ reg = <0xffd04000 0x1000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cb_intosc_hs_div2_clk: cb_intosc_hs_div2_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ cb_intosc_ls_clk: cb_intosc_ls_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ f2s_free_clk: f2s_free_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ osc1: osc1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ main_pll: main_pll@40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-pll-clock";
+ clocks = <&osc1>, <&cb_intosc_ls_clk>,
+ <&f2s_free_clk>;
+ reg = <0x40>;
+
+ main_mpu_base_clk: main_mpu_base_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ div-reg = <0x140 0 11>;
+ };
+
+ main_noc_base_clk: main_noc_base_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ div-reg = <0x144 0 11>;
+ };
+
+ main_emaca_clk: main_emaca_clk@68 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x68>;
+ };
+
+ main_emacb_clk: main_emacb_clk@6c {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x6C>;
+ };
+
+ main_emac_ptp_clk: main_emac_ptp_clk@70 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x70>;
+ };
+
+ main_gpio_db_clk: main_gpio_db_clk@74 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x74>;
+ };
+
+ main_sdmmc_clk: main_sdmmc_clk@78 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk"
+;
+ clocks = <&main_pll>;
+ reg = <0x78>;
+ };
+
+ main_s2f_usr0_clk: main_s2f_usr0_clk@7c {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x7C>;
+ };
+
+ main_s2f_usr1_clk: main_s2f_usr1_clk@80 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x80>;
+ };
+
+ main_hmc_pll_ref_clk: main_hmc_pll_ref_clk@84 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x84>;
+ };
+
+ main_periph_ref_clk: main_periph_ref_clk@9c {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x9C>;
+ };
+ };
+
+ periph_pll: periph_pll@c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-pll-clock";
+ clocks = <&osc1>, <&cb_intosc_ls_clk>,
+ <&f2s_free_clk>, <&main_periph_ref_clk>;
+ reg = <0xC0>;
+
+ peri_mpu_base_clk: peri_mpu_base_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ div-reg = <0x140 16 11>;
+ };
+
+ peri_noc_base_clk: peri_noc_base_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ div-reg = <0x144 16 11>;
+ };
+
+ peri_emaca_clk: peri_emaca_clk@e8 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0xE8>;
+ };
+
+ peri_emacb_clk: peri_emacb_clk@ec {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0xEC>;
+ };
+
+ peri_emac_ptp_clk: peri_emac_ptp_clk@f0 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0xF0>;
+ };
+
+ peri_gpio_db_clk: peri_gpio_db_clk@f4 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0xF4>;
+ };
+
+ peri_sdmmc_clk: peri_sdmmc_clk@f8 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0xF8>;
+ };
+
+ peri_s2f_usr0_clk: peri_s2f_usr0_clk@fc {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0xFC>;
+ };
+
+ peri_s2f_usr1_clk: peri_s2f_usr1_clk@100 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0x100>;
+ };
+
+ peri_hmc_pll_ref_clk: peri_hmc_pll_ref_clk@104 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0x104>;
+ };
+ };
+
+ mpu_free_clk: mpu_free_clk@60 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_mpu_base_clk>, <&peri_mpu_base_clk>,
+ <&osc1>, <&cb_intosc_hs_div2_clk>,
+ <&f2s_free_clk>;
+ reg = <0x60>;
+ };
+
+ noc_free_clk: noc_free_clk@64 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_noc_base_clk>, <&peri_noc_base_clk>,
+ <&osc1>, <&cb_intosc_hs_div2_clk>,
+ <&f2s_free_clk>;
+ reg = <0x64>;
+ };
+
+ s2f_user1_free_clk: s2f_user1_free_clk@104 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_s2f_usr1_clk>, <&peri_s2f_usr1_clk>,
+ <&osc1>, <&cb_intosc_hs_div2_clk>,
+ <&f2s_free_clk>;
+ reg = <0x104>;
+ };
+
+ sdmmc_free_clk: sdmmc_free_clk@f8 {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_sdmmc_clk>, <&peri_sdmmc_clk>,
+ <&osc1>, <&cb_intosc_hs_div2_clk>,
+ <&f2s_free_clk>;
+ fixed-divider = <4>;
+ reg = <0xF8>;
+ };
+
+ l4_sys_free_clk: l4_sys_free_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&noc_free_clk>;
+ fixed-divider = <4>;
+ };
+
+ l4_main_clk: l4_main_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&noc_free_clk>;
+ div-reg = <0xA8 0 2>;
+ clk-gate = <0x48 1>;
+ };
+
+ l4_mp_clk: l4_mp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&noc_free_clk>;
+ div-reg = <0xA8 8 2>;
+ clk-gate = <0x48 2>;
+ };
+
+ l4_sp_clk: l4_sp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&noc_free_clk>;
+ div-reg = <0xA8 16 2>;
+ clk-gate = <0x48 3>;
+ };
+
+ mpu_periph_clk: mpu_periph_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&mpu_free_clk>;
+ fixed-divider = <4>;
+ clk-gate = <0x48 0>;
+ };
+
+ sdmmc_clk: sdmmc_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&sdmmc_free_clk>;
+ clk-gate = <0xC8 5>;
+ };
+
+ qspi_clk: qspi_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&l4_main_clk>;
+ clk-gate = <0xC8 11>;
+ };
+
+ nand_x_clk: nand_x_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&l4_mp_clk>;
+ clk-gate = <0xC8 10>;
+ };
+
+ nand_ecc_clk: nand_ecc_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&nand_x_clk>;
+ clk-gate = <0xC8 10>;
+ };
+
+ nand_clk: nand_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&nand_x_clk>;
+ fixed-divider = <4>;
+ clk-gate = <0xC8 10>;
+ };
+
+ spi_m_clk: spi_m_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&l4_main_clk>;
+ clk-gate = <0xC8 9>;
+ };
+
+ usb_clk: usb_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&l4_mp_clk>;
+ clk-gate = <0xC8 8>;
+ };
+
+ s2f_usr1_clk: s2f_usr1_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&peri_s2f_usr1_clk>;
+ clk-gate = <0xC8 6>;
+ };
+ };
+ };
+
+ socfpga_axi_setup: stmmac-axi-config {
+ snps,wr_osr_lmt = <0xf>;
+ snps,rd_osr_lmt = <0xf>;
+ snps,blen = <0 0 0 0 16 0 0>;
+ };
+
+ gmac0: ethernet@ff800000 {
+ compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
+ altr,sysmgr-syscon = <&sysmgr 0x44 0>;
+ reg = <0xff800000 0x2000>;
+ interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ /* Filled in by bootloader */
+ mac-address = [00 00 00 00 00 00];
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ tx-fifo-depth = <4096>;
+ rx-fifo-depth = <16384>;
+ clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
+ clock-names = "stmmaceth", "ptp_ref";
+ resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
+ reset-names = "stmmaceth", "ahb";
+ snps,axi-config = <&socfpga_axi_setup>;
+ status = "disabled";
+ };
+
+ gmac1: ethernet@ff802000 {
+ compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
+ altr,sysmgr-syscon = <&sysmgr 0x48 8>;
+ reg = <0xff802000 0x2000>;
+ interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ /* Filled in by bootloader */
+ mac-address = [00 00 00 00 00 00];
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ tx-fifo-depth = <4096>;
+ rx-fifo-depth = <16384>;
+ clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
+ clock-names = "stmmaceth", "ptp_ref";
+ resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
+ reset-names = "stmmaceth", "ahb";
+ snps,axi-config = <&socfpga_axi_setup>;
+ status = "disabled";
+ };
+
+ gmac2: ethernet@ff804000 {
+ compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
+ altr,sysmgr-syscon = <&sysmgr 0x4C 16>;
+ reg = <0xff804000 0x2000>;
+ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ /* Filled in by bootloader */
+ mac-address = [00 00 00 00 00 00];
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ tx-fifo-depth = <4096>;
+ rx-fifo-depth = <16384>;
+ clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
+ clock-names = "stmmaceth", "ptp_ref";
+ resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
+ reset-names = "stmmaceth", "ahb";
+ snps,axi-config = <&socfpga_axi_setup>;
+ status = "disabled";
+ };
+
+ gpio0: gpio@ffc02900 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xffc02900 0x100>;
+ resets = <&rst GPIO0_RESET>;
+ status = "disabled";
+
+ porta: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <29>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio1: gpio@ffc02a00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xffc02a00 0x100>;
+ resets = <&rst GPIO1_RESET>;
+ status = "disabled";
+
+ portb: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <29>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio2: gpio@ffc02b00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xffc02b00 0x100>;
+ resets = <&rst GPIO2_RESET>;
+ status = "disabled";
+
+ portc: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <27>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ fpga_mgr: fpga-mgr@ffd03000 {
+ compatible = "altr,socfpga-a10-fpga-mgr";
+ reg = <0xffd03000 0x100
+ 0xffcfe400 0x20>;
+ clocks = <&l4_mp_clk>;
+ resets = <&rst FPGAMGR_RESET>;
+ reset-names = "fpgamgr";
+ };
+
+ i2c0: i2c@ffc02200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02200 0x100>;
+ interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sp_clk>;
+ resets = <&rst I2C0_RESET>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@ffc02300 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02300 0x100>;
+ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sp_clk>;
+ resets = <&rst I2C1_RESET>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@ffc02400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02400 0x100>;
+ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sp_clk>;
+ resets = <&rst I2C2_RESET>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@ffc02500 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02500 0x100>;
+ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sp_clk>;
+ resets = <&rst I2C3_RESET>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@ffc02600 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02600 0x100>;
+ interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sp_clk>;
+ resets = <&rst I2C4_RESET>;
+ status = "disabled";
+ };
+
+ spi0: spi@ffda4000 {
+ compatible = "snps,dw-apb-ssi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xffda4000 0x100>;
+ interrupts = <0 101 4>;
+ num-cs = <4>;
+ /*32bit_access;*/
+ clocks = <&spi_m_clk>;
+ resets = <&rst SPIM0_RESET>;
+ reset-names = "spi";
+ status = "disabled";
+ };
+
+ spi1: spi@ffda5000 {
+ compatible = "snps,dw-apb-ssi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xffda5000 0x100>;
+ interrupts = <0 102 4>;
+ num-cs = <4>;
+ /*32bit_access;*/
+ tx-dma-channel = <&pdma 16>;
+ rx-dma-channel = <&pdma 17>;
+ clocks = <&spi_m_clk>;
+ resets = <&rst SPIM1_RESET>;
+ reset-names = "spi";
+ status = "disabled";
+ };
+
+ sdr: sdr@ffcfb100 {
+ compatible = "altr,sdr-ctl", "syscon";
+ reg = <0xffcfb100 0x80>;
+ };
+
+ L2: cache-controller@fffff000 {
+ compatible = "arm,pl310-cache";
+ reg = <0xfffff000 0x1000>;
+ interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+ cache-unified;
+ cache-level = <2>;
+ prefetch-data = <1>;
+ prefetch-instr = <1>;
+ arm,shared-override;
+ };
+
+ mmc: mmc@ff808000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "altr,socfpga-dw-mshc";
+ reg = <0xff808000 0x1000>;
+ interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+ fifo-depth = <0x400>;
+ clocks = <&l4_mp_clk>, <&sdmmc_clk>;
+ clock-names = "biu", "ciu";
+ resets = <&rst SDMMC_RESET>;
+ altr,sysmgr-syscon = <&sysmgr 0x28 4>;
+ status = "disabled";
+ };
+
+ nand: nand@ffb90000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "altr,socfpga-denali-nand";
+ reg = <0xffb90000 0x72000>,
+ <0xffb80000 0x10000>;
+ reg-names = "nand_data", "denali_reg";
+ interrupts = <0 99 4>;
+ clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
+ clock-names = "nand", "nand_x", "ecc";
+ resets = <&rst NAND_RESET>;
+ status = "disabled";
+ };
+
+ ocram: sram@ffe00000 {
+ compatible = "mmio-sram";
+ reg = <0xffe00000 0x40000>;
+ };
+
+ eccmgr: eccmgr {
+ compatible = "altr,socfpga-a10-ecc-manager";
+ altr,sysmgr-syscon = <&sysmgr>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ranges;
+
+ sdramedac {
+ compatible = "altr,sdram-edac-a10";
+ altr,sdr-syscon = <&sdr>;
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+ <49 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ l2-ecc@ffd06010 {
+ compatible = "altr,socfpga-a10-l2-ecc";
+ reg = <0xffd06010 0x4>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+ <32 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ ocram-ecc@ff8c3000 {
+ compatible = "altr,socfpga-a10-ocram-ecc";
+ reg = <0xff8c3000 0x400>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
+ <33 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ emac0-rx-ecc@ff8c0800 {
+ compatible = "altr,socfpga-eth-mac-ecc";
+ reg = <0xff8c0800 0x400>;
+ altr,ecc-parent = <&gmac0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>,
+ <36 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ emac0-tx-ecc@ff8c0c00 {
+ compatible = "altr,socfpga-eth-mac-ecc";
+ reg = <0xff8c0c00 0x400>;
+ altr,ecc-parent = <&gmac0>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
+ <37 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sdmmca-ecc@ff8c2c00 {
+ compatible = "altr,socfpga-sdmmc-ecc";
+ reg = <0xff8c2c00 0x400>;
+ altr,ecc-parent = <&mmc>;
+ interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+ <47 IRQ_TYPE_LEVEL_HIGH>,
+ <16 IRQ_TYPE_LEVEL_HIGH>,
+ <48 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ dma-ecc@ff8c8000 {
+ compatible = "altr,socfpga-dma-ecc";
+ reg = <0xff8c8000 0x400>;
+ altr,ecc-parent = <&pdma>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+ <42 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ usb0-ecc@ff8c8800 {
+ compatible = "altr,socfpga-usb-ecc";
+ reg = <0xff8c8800 0x400>;
+ altr,ecc-parent = <&usb0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+ <34 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ qspi: spi@ff809000 {
+ compatible = "intel,socfpga-qspi", "cdns,qspi-nor";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xff809000 0x100>,
+ <0xffa00000 0x100000>;
+ interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+ cdns,fifo-depth = <128>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x00000000>;
+ clocks = <&qspi_clk>;
+ resets = <&rst QSPI_RESET>, <&rst QSPI_OCP_RESET>;
+ reset-names = "qspi", "qspi-ocp";
+ status = "disabled";
+ };
+
+ rst: rstmgr@ffd05000 {
+ #reset-cells = <1>;
+ compatible = "altr,rst-mgr";
+ reg = <0xffd05000 0x100>;
+ altr,modrst-offset = <0x20>;
+ };
+
+ scu: snoop-control-unit@ffffc000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0xffffc000 0x100>;
+ };
+
+ sysmgr: sysmgr@ffd06000 {
+ compatible = "altr,sys-mgr", "syscon";
+ reg = <0xffd06000 0x300>;
+ cpu1-start-addr = <0xffd06230>;
+ };
+
+ /* Local timer */
+ timer@ffffc600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xffffc600 0x100>;
+ interrupts = <1 13 0xf01>;
+ clocks = <&mpu_periph_clk>;
+ };
+
+ timer0: timer0@ffc02700 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xffc02700 0x100>;
+ clocks = <&l4_sp_clk>;
+ clock-names = "timer";
+ resets = <&rst SPTIMER0_RESET>;
+ reset-names = "timer";
+ };
+
+ timer1: timer1@ffc02800 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xffc02800 0x100>;
+ clocks = <&l4_sp_clk>;
+ clock-names = "timer";
+ resets = <&rst SPTIMER1_RESET>;
+ reset-names = "timer";
+ };
+
+ timer2: timer2@ffd00000 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xffd00000 0x100>;
+ clocks = <&l4_sys_free_clk>;
+ clock-names = "timer";
+ resets = <&rst L4SYSTIMER0_RESET>;
+ reset-names = "timer";
+ };
+
+ timer3: timer3@ffd00100 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xffd00100 0x100>;
+ clocks = <&l4_sys_free_clk>;
+ clock-names = "timer";
+ resets = <&rst L4SYSTIMER1_RESET>;
+ reset-names = "timer";
+ };
+
+ uart0: serial@ffc02000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xffc02000 0x100>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&l4_sp_clk>;
+ resets = <&rst UART0_RESET>;
+ status = "disabled";
+ };
+
+ uart1: serial@ffc02100 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xffc02100 0x100>;
+ interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&l4_sp_clk>;
+ resets = <&rst UART1_RESET>;
+ status = "disabled";
+ };
+
+ usbphy0: usbphy {
+ #phy-cells = <0>;
+ compatible = "usb-nop-xceiv";
+ status = "okay";
+ };
+
+ usb0: usb@ffb00000 {
+ compatible = "snps,dwc2";
+ reg = <0xffb00000 0xffff>;
+ interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usb_clk>;
+ clock-names = "otg";
+ resets = <&rst USB0_RESET>;
+ reset-names = "dwc2";
+ phys = <&usbphy0>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ usb1: usb@ffb40000 {
+ compatible = "snps,dwc2";
+ reg = <0xffb40000 0xffff>;
+ interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usb_clk>;
+ clock-names = "otg";
+ resets = <&rst USB1_RESET>;
+ reset-names = "dwc2";
+ phys = <&usbphy0>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ watchdog0: watchdog@ffd00200 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd00200 0x100>;
+ interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sys_free_clk>;
+ resets = <&rst L4WD0_RESET>;
+ status = "disabled";
+ };
+
+ watchdog1: watchdog@ffd00300 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd00300 0x100>;
+ interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sys_free_clk>;
+ resets = <&rst L4WD1_RESET>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/src/arm/intel/socfpga/socfpga_arria10_chameleonv3.dts b/src/arm/intel/socfpga/socfpga_arria10_chameleonv3.dts
new file mode 100644
index 0000000..422d00c
--- /dev/null
+++ b/src/arm/intel/socfpga/socfpga_arria10_chameleonv3.dts
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2022 Google LLC
+ */
+/dts-v1/;
+#include "socfpga_arria10_mercury_aa1.dtsi"
+
+/ {
+ model = "Google Chameleon V3";
+ compatible = "google,chameleon-v3", "enclustra,mercury-aa1",
+ "altr,socfpga-arria10", "altr,socfpga";
+
+ aliases {
+ serial0 = &uart0;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ };
+};
+
+&gmac0 {
+ status = "okay";
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ ssm2603: audio-codec@1a {
+ compatible = "adi,ssm2603";
+ reg = <0x1a>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ u80: gpio@21 {
+ compatible = "nxp,pca9535";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "SOM_AUD_MUTE",
+ "DP1_OUT_CEC_EN",
+ "DP2_OUT_CEC_EN",
+ "DP1_SOM_PS8469_CAD",
+ "DPD_SOM_PS8469_CAD",
+ "DP_OUT_PWR_EN",
+ "STM32_RST_L",
+ "STM32_BOOT0",
+
+ "FPGA_PROT",
+ "STM32_FPGA_COMM0",
+ "TP119",
+ "TP120",
+ "TP121",
+ "TP122",
+ "TP123",
+ "TP124";
+ };
+};
+
+&mmc {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
diff --git a/src/arm/intel/socfpga/socfpga_arria10_mercury_aa1.dtsi b/src/arm/intel/socfpga/socfpga_arria10_mercury_aa1.dtsi
new file mode 100644
index 0000000..41f865c
--- /dev/null
+++ b/src/arm/intel/socfpga/socfpga_arria10_mercury_aa1.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2022 Google LLC
+ */
+
+#include "socfpga_arria10.dtsi"
+
+/ {
+
+ model = "Enclustra Mercury AA1";
+ compatible = "enclustra,mercury-aa1", "altr,socfpga-arria10", "altr,socfpga";
+
+ aliases {
+ ethernet0 = &gmac0;
+ serial1 = &uart1;
+ };
+
+ memory@0 {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x80000000>; /* 2GB */
+ };
+
+ chosen {
+ stdout-path = "serial1:115200n8";
+ };
+};
+
+&gmac0 {
+ phy-mode = "rgmii";
+ phy-addr = <0xffffffff>; /* probe for phy addr */
+
+ max-frame-size = <3800>;
+
+ phy-handle = <&phy3>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy3: ethernet-phy@3 {
+ txd0-skew-ps = <0>; /* -420ps */
+ txd1-skew-ps = <0>; /* -420ps */
+ txd2-skew-ps = <0>; /* -420ps */
+ txd3-skew-ps = <0>; /* -420ps */
+ rxd0-skew-ps = <420>; /* 0ps */
+ rxd1-skew-ps = <420>; /* 0ps */
+ rxd2-skew-ps = <420>; /* 0ps */
+ rxd3-skew-ps = <420>; /* 0ps */
+ txen-skew-ps = <0>; /* -420ps */
+ txc-skew-ps = <1860>; /* 960ps */
+ rxdv-skew-ps = <420>; /* 0ps */
+ rxc-skew-ps = <1680>; /* 780ps */
+ reg = <3>;
+ };
+ };
+};
+
+&i2c1 {
+ atsha204a: crypto@64 {
+ compatible = "atmel,atsha204a";
+ reg = <0x64>;
+ };
+
+ isl12022: isl12022@6f {
+ compatible = "isil,isl12022";
+ reg = <0x6f>;
+ };
+};
+
+/* Following mappings are taken from arria10 socdk dts */
+&mmc {
+ cap-sd-highspeed;
+ broken-cd;
+ bus-width = <4>;
+ clk-phase-sd-hs = <0>, <135>;
+};
+
+&osc1 {
+ clock-frequency = <33330000>;
+};
diff --git a/src/arm/intel/socfpga/socfpga_arria10_mercury_pe1.dts b/src/arm/intel/socfpga/socfpga_arria10_mercury_pe1.dts
new file mode 100644
index 0000000..cf533f7
--- /dev/null
+++ b/src/arm/intel/socfpga/socfpga_arria10_mercury_pe1.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2023 Steffen Trumtrar <kernel@pengutronix.de>
+ */
+/dts-v1/;
+#include "socfpga_arria10_mercury_aa1.dtsi"
+
+/ {
+ model = "Enclustra Mercury+ PE1";
+ compatible = "enclustra,mercury-pe1", "enclustra,mercury-aa1",
+ "altr,socfpga-arria10", "altr,socfpga";
+
+ aliases {
+ ethernet0 = &gmac0;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+};
+
+&gmac0 {
+ status = "okay";
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&mmc {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
diff --git a/src/arm/intel/socfpga/socfpga_arria10_socdk.dtsi b/src/arm/intel/socfpga/socfpga_arria10_socdk.dtsi
new file mode 100644
index 0000000..ec73654
--- /dev/null
+++ b/src/arm/intel/socfpga/socfpga_arria10_socdk.dtsi
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Altera Corporation <www.altera.com>
+ */
+#include "socfpga_arria10.dtsi"
+
+/ {
+ model = "Altera SOCFPGA Arria 10";
+ compatible = "altr,socfpga-arria10-socdk", "altr,socfpga-arria10", "altr,socfpga";
+
+ aliases {
+ ethernet0 = &gmac0;
+ serial0 = &uart1;
+ };
+
+ chosen {
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1GB */
+ };
+
+ a10leds {
+ compatible = "gpio-leds";
+
+ a10sr_led0 {
+ label = "a10sr-led0";
+ gpios = <&a10sr_gpio 0 1>;
+ };
+
+ a10sr_led1 {
+ label = "a10sr-led1";
+ gpios = <&a10sr_gpio 1 1>;
+ };
+
+ a10sr_led2 {
+ label = "a10sr-led2";
+ gpios = <&a10sr_gpio 2 1>;
+ };
+
+ a10sr_led3 {
+ label = "a10sr-led3";
+ gpios = <&a10sr_gpio 3 1>;
+ };
+ };
+
+ ref_033v: 033-v-ref {
+ compatible = "regulator-fixed";
+ regulator-name = "0.33V";
+ regulator-min-microvolt = <330000>;
+ regulator-max-microvolt = <330000>;
+ };
+
+ soc {
+ clkmgr@ffd04000 {
+ clocks {
+ osc1 {
+ clock-frequency = <25000000>;
+ };
+ };
+ };
+ };
+};
+
+&gmac0 {
+ phy-mode = "rgmii";
+ phy-addr = <0xffffffff>; /* probe for phy addr */
+
+ /*
+ * These skews assume the user's FPGA design is adding 600ps of delay
+ * for TX_CLK on Arria 10.
+ *
+ * All skews are offset since hardware skew values for the ksz9031
+ * range from a negative skew to a positive skew.
+ * See the micrel-ksz90x1.txt Documentation file for details.
+ */
+ txd0-skew-ps = <0>; /* -420ps */
+ txd1-skew-ps = <0>; /* -420ps */
+ txd2-skew-ps = <0>; /* -420ps */
+ txd3-skew-ps = <0>; /* -420ps */
+ rxd0-skew-ps = <420>; /* 0ps */
+ rxd1-skew-ps = <420>; /* 0ps */
+ rxd2-skew-ps = <420>; /* 0ps */
+ rxd3-skew-ps = <420>; /* 0ps */
+ txen-skew-ps = <0>; /* -420ps */
+ txc-skew-ps = <1860>; /* 960ps */
+ rxdv-skew-ps = <420>; /* 0ps */
+ rxc-skew-ps = <1680>; /* 780ps */
+ max-frame-size = <3800>;
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&spi1 {
+ status = "okay";
+
+ resource-manager@0 {
+ compatible = "altr,a10sr";
+ reg = <0>;
+ spi-max-frequency = <100000>;
+ /* low-level active IRQ at GPIO1_5 */
+ interrupt-parent = <&portb>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ a10sr_gpio: gpio-controller {
+ compatible = "altr,a10sr-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ a10sr_rst: reset-controller {
+ compatible = "altr,a10sr-reset";
+ #reset-cells = <1>;
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ /*
+ * adjust the falling times to decrease the i2c frequency to 50Khz
+ * because the LCD module does not work at the standard 100Khz
+ */
+ clock-frequency = <100000>;
+ i2c-sda-falling-time-ns = <6000>;
+ i2c-scl-falling-time-ns = <6000>;
+
+ adc@14 {
+ compatible = "lltc,ltc2497";
+ reg = <0x14>;
+ vref-supply = <&ref_033v>;
+ };
+
+ adc@16 {
+ compatible = "lltc,ltc2497";
+ reg = <0x16>;
+ vref-supply = <&ref_033v>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+
+ ltc@5c {
+ compatible = "ltc2977";
+ reg = <0x5c>;
+ };
+
+ temp@4c {
+ compatible = "maxim,max1619";
+ reg = <0x4c>;
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ disable-over-current;
+};
+
+&watchdog1 {
+ status = "okay";
+};
diff --git a/src/arm/intel/socfpga/socfpga_arria10_socdk_nand.dts b/src/arm/intel/socfpga/socfpga_arria10_socdk_nand.dts
new file mode 100644
index 0000000..a662df3
--- /dev/null
+++ b/src/arm/intel/socfpga/socfpga_arria10_socdk_nand.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015 Altera Corporation. All rights reserved.
+ */
+
+/dts-v1/;
+#include "socfpga_arria10_socdk.dtsi"
+
+&nand {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Boot and fpga data";
+ reg = <0x0 0x02500000>;
+ };
+ partition@1c00000 {
+ label = "Root Filesystem - JFFS2";
+ reg = <0x02500000 0x05500000>;
+ };
+ };
+};
diff --git a/src/arm/intel/socfpga/socfpga_arria10_socdk_qspi.dts b/src/arm/intel/socfpga/socfpga_arria10_socdk_qspi.dts
new file mode 100644
index 0000000..11ccdc6
--- /dev/null
+++ b/src/arm/intel/socfpga/socfpga_arria10_socdk_qspi.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 Intel. All rights reserved.
+ */
+
+/dts-v1/;
+#include "socfpga_arria10_socdk.dtsi"
+
+&qspi {
+ status = "okay";
+
+ flash0: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,mt25qu02g", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <100000000>;
+
+ m25p,fast-read;
+ cdns,page-size = <256>;
+ cdns,block-size = <16>;
+ cdns,read-delay = <3>;
+ cdns,tshsl-ns = <50>;
+ cdns,tsd2d-ns = <50>;
+ cdns,tchsh-ns = <4>;
+ cdns,tslch-ns = <4>;
+
+ partition@qspi-boot {
+ label = "Boot and fpga data";
+ reg = <0x0 0x2720000>;
+ };
+
+ partition@qspi-rootfs {
+ label = "Root Filesystem - JFFS2";
+ reg = <0x2720000 0x58E0000>;
+ };
+ };
+};
diff --git a/src/arm/intel/socfpga/socfpga_arria10_socdk_sdmmc.dts b/src/arm/intel/socfpga/socfpga_arria10_socdk_sdmmc.dts
new file mode 100644
index 0000000..d396936
--- /dev/null
+++ b/src/arm/intel/socfpga/socfpga_arria10_socdk_sdmmc.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014-2015 Altera Corporation <www.altera.com>
+ */
+
+/dts-v1/;
+#include "socfpga_arria10_socdk.dtsi"
+
+&mmc {
+ status = "okay";
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ broken-cd;
+ bus-width = <4>;
+ clk-phase-sd-hs = <0>, <135>;
+};
+
+&eccmgr {
+ sdmmca-ecc@ff8c2c00 {
+ compatible = "altr,socfpga-sdmmc-ecc";
+ reg = <0xff8c2c00 0x400>;
+ altr,ecc-parent = <&mmc>;
+ interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+ <47 IRQ_TYPE_LEVEL_HIGH>,
+ <16 IRQ_TYPE_LEVEL_HIGH>,
+ <48 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
diff --git a/src/arm/intel/socfpga/socfpga_arria5.dtsi b/src/arm/intel/socfpga/socfpga_arria5.dtsi
new file mode 100644
index 0000000..40fecde
--- /dev/null
+++ b/src/arm/intel/socfpga/socfpga_arria5.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ */
+
+/dts-v1/;
+/* First 4KB has trampoline code for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+#include "socfpga.dtsi"
+
+/ {
+ soc {
+ clkmgr@ffd04000 {
+ clocks {
+ osc1 {
+ clock-frequency = <25000000>;
+ };
+ };
+ };
+
+ mmc0: mmc@ff704000 {
+ broken-cd;
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ clk-phase-sd-hs = <0>, <135>;
+ };
+
+ sysmgr@ffd08000 {
+ cpu1-start-addr = <0xffd080c4>;
+ };
+ };
+};
+
+&watchdog0 {
+ status = "okay";
+};
diff --git a/src/arm/intel/socfpga/socfpga_arria5_socdk.dts b/src/arm/intel/socfpga/socfpga_arria5_socdk.dts
new file mode 100644
index 0000000..c483857
--- /dev/null
+++ b/src/arm/intel/socfpga/socfpga_arria5_socdk.dts
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ */
+
+#include "socfpga_arria5.dtsi"
+
+/ {
+ model = "Altera SOCFPGA Arria V SoC Development Kit";
+ compatible = "altr,socfpga-arria5-socdk", "altr,socfpga-arria5", "altr,socfpga";
+
+ chosen {
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1GB */
+ };
+
+ aliases {
+ /* this allow the ethaddr uboot environmnet variable contents
+ * to be added to the gmac1 device tree blob.
+ */
+ ethernet0 = &gmac1;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-hps0 {
+ label = "hps_led0";
+ gpios = <&porta 0 1>;
+ };
+
+ led-hps1 {
+ label = "hps_led1";
+ gpios = <&portb 11 1>;
+ };
+
+ led-hps2 {
+ label = "hps_led2";
+ gpios = <&porta 17 1>;
+ };
+
+ led-hps3 {
+ label = "hps_led3";
+ gpios = <&porta 18 1>;
+ };
+ };
+
+ regulator_3_3v: regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ txen-skew-ps = <0>;
+ txc-skew-ps = <2600>;
+ rxdv-skew-ps = <0>;
+ rxc-skew-ps = <2000>;
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ /*
+ * adjust the falling times to decrease the i2c frequency to 50Khz
+ * because the LCD module does not work at the standard 100Khz
+ */
+ i2c-sda-falling-time-ns = <5000>;
+ i2c-scl-falling-time-ns = <5000>;
+
+ eeprom@51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <®ulator_3_3v>;
+ vqmmc-supply = <®ulator_3_3v>;
+ status = "okay";
+};
+
+&qspi {
+ status = "okay";
+
+ flash: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q256a", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <100000000>;
+
+ m25p,fast-read;
+ cdns,page-size = <256>;
+ cdns,block-size = <16>;
+ cdns,read-delay = <4>;
+ cdns,tshsl-ns = <50>;
+ cdns,tsd2d-ns = <50>;
+ cdns,tchsh-ns = <4>;
+ cdns,tslch-ns = <4>;
+
+ partition@qspi-boot {
+ /* 8MB for raw data. */
+ label = "Flash 0 Raw Data";
+ reg = <0x0 0x800000>;
+ };
+
+ partition@qspi-rootfs {
+ /* 120MB for jffs2 data. */
+ label = "Flash 0 jffs2 Filesystem";
+ reg = <0x800000 0x7800000>;
+ };
+ };
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/src/arm/intel/socfpga/socfpga_cyclone5.dtsi b/src/arm/intel/socfpga/socfpga_cyclone5.dtsi
new file mode 100644
index 0000000..305fe20
--- /dev/null
+++ b/src/arm/intel/socfpga/socfpga_cyclone5.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ */
+
+/dts-v1/;
+/* First 4KB has trampoline code for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+#include "socfpga.dtsi"
+
+/ {
+ soc {
+ clkmgr@ffd04000 {
+ clocks {
+ osc1 {
+ clock-frequency = <25000000>;
+ };
+ };
+ };
+
+ mmc0: mmc@ff704000 {
+ broken-cd;
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ clk-phase-sd-hs = <0>, <135>;
+ };
+
+ sysmgr@ffd08000 {
+ cpu1-start-addr = <0xffd080c4>;
+ };
+ };
+};
+
+&watchdog0 {
+ status = "okay";
+};
diff --git a/src/arm/intel/socfpga/socfpga_cyclone5_chameleon96.dts b/src/arm/intel/socfpga/socfpga_cyclone5_chameleon96.dts
new file mode 100644
index 0000000..76262f1
--- /dev/null
+++ b/src/arm/intel/socfpga/socfpga_cyclone5_chameleon96.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for the Chameleon96
+ *
+ * Copyright (c) 2018 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+ model = "Novetech Chameleon96";
+ compatible = "novtech,chameleon96", "altr,socfpga-cyclone5", "altr,socfpga";
+
+ chosen {
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x20000000>; /* 512MB */
+ };
+
+ regulator_3_3v: regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ user_led1 {
+ label = "green:user1";
+ gpios = <&porta 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ user_led2 {
+ label = "green:user2";
+ gpios = <&porta 22 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "mmc0";
+ };
+
+ user_led3 {
+ label = "green:user3";
+ gpios = <&porta 25 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ user_led4 {
+ label = "green:user4";
+ gpios = <&portb 3 GPIO_ACTIVE_LOW>;
+ panic-indicator;
+ linux,default-trigger = "none";
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&i2c0 {
+ /* On Low speed expansion */
+ label = "LS-I2C0";
+ status = "okay";
+};
+
+&i2c1 {
+ /* On Low speed expansion */
+ label = "LS-I2C1";
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ /* On High speed expansion */
+ label = "HS-I2C2";
+ status = "okay";
+};
+
+&mmc0 {
+ vmmc-supply = <®ulator_3_3v>;
+ vqmmc-supply = <®ulator_3_3v>;
+ status = "okay";
+};
+
+&spi0 {
+ /* On High speed expansion */
+ label = "HS-SPI1";
+ status = "okay";
+};
+
+&spi1 {
+ /* On Low speed expansion */
+ label = "LS-SPI0";
+ status = "okay";
+};
+
+&uart0 {
+ /* On Low speed expansion */
+ label = "LS-UART1";
+ status = "okay";
+};
+
+&uart1 {
+ /* On Low speed expansion */
+ label = "LS-UART0";
+ status = "okay";
+};
+
+&usbphy0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/src/arm/intel/socfpga/socfpga_cyclone5_de0_nano_soc.dts b/src/arm/intel/socfpga/socfpga_cyclone5_de0_nano_soc.dts
new file mode 100644
index 0000000..bedf577
--- /dev/null
+++ b/src/arm/intel/socfpga/socfpga_cyclone5_de0_nano_soc.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+ model = "Terasic DE-0(Atlas)";
+ compatible = "terasic,de0-atlas", "altr,socfpga-cyclone5", "altr,socfpga";
+
+ chosen {
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1GB */
+ };
+
+ aliases {
+ ethernet0 = &gmac1;
+ };
+
+ regulator_3_3v: regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-hps0 {
+ label = "hps_led0";
+ gpios = <&portb 24 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+
+ txd0-skew-ps = <0>; /* -420ps */
+ txd1-skew-ps = <0>; /* -420ps */
+ txd2-skew-ps = <0>; /* -420ps */
+ txd3-skew-ps = <0>; /* -420ps */
+ rxd0-skew-ps = <420>; /* 0ps */
+ rxd1-skew-ps = <420>; /* 0ps */
+ rxd2-skew-ps = <420>; /* 0ps */
+ rxd3-skew-ps = <420>; /* 0ps */
+ txen-skew-ps = <0>; /* -420ps */
+ txc-skew-ps = <1860>; /* 960ps */
+ rxdv-skew-ps = <420>; /* 0ps */
+ rxc-skew-ps = <1680>; /* 780ps */
+
+ max-frame-size = <3800>;
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ adxl345: adxl345@53 {
+ compatible = "adi,adxl345";
+ reg = <0x53>;
+
+ interrupt-parent = <&portc>;
+ interrupts = <3 2>;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <®ulator_3_3v>;
+ vqmmc-supply = <®ulator_3_3v>;
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/src/arm/intel/socfpga/socfpga_cyclone5_mcv.dtsi b/src/arm/intel/socfpga/socfpga_cyclone5_mcv.dtsi
new file mode 100644
index 0000000..3b9dadd
--- /dev/null
+++ b/src/arm/intel/socfpga/socfpga_cyclone5_mcv.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+ model = "Aries/DENX MCV";
+ compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+ memory@0 {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1 GiB */
+ };
+};
+
+&mmc0 { /* On-SoM eMMC */
+ bus-width = <8>;
+ clk-phase-sd-hs = <0>, <135>;
+ status = "okay";
+};
diff --git a/src/arm/intel/socfpga/socfpga_cyclone5_mcvevk.dts b/src/arm/intel/socfpga/socfpga_cyclone5_mcvevk.dts
new file mode 100644
index 0000000..ceaec29
--- /dev/null
+++ b/src/arm/intel/socfpga/socfpga_cyclone5_mcvevk.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+#include "socfpga_cyclone5_mcv.dtsi"
+
+/ {
+ model = "Aries/DENX MCV EVK";
+ compatible = "denx,mcvevk", "altr,socfpga-cyclone5", "altr,socfpga";
+
+ aliases {
+ ethernet0 = &gmac0;
+ stmpe-i2c0 = &stmpe1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&can0 {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
+&gmac0 {
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&gpio0 { /* GPIO 0 ... 28 */
+ status = "okay";
+};
+
+&gpio1 { /* GPIO 29 ... 57 */
+ status = "okay";
+};
+
+&gpio2 { /* GPIO 58..66 (HLGPI 0..13 at offset 13) */
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ stmpe1: stmpe811@41 {
+ compatible = "st,stmpe811";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x41>;
+ id = <0>;
+ blocks = <0x5>;
+ irq-gpio = <&portb 28 0x4>; /* GPIO 57, trig. level HI */
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ ts,sample-time = <4>;
+ ts,mod-12b = <1>;
+ ts,ref-sel = <0>;
+ ts,adc-freq = <1>;
+ ts,ave-ctrl = <1>;
+ ts,touch-det-delay = <3>;
+ ts,settling = <4>;
+ ts,fraction-z = <7>;
+ ts,i-drive = <1>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/src/arm/intel/socfpga/socfpga_cyclone5_socdk.dts b/src/arm/intel/socfpga/socfpga_cyclone5_socdk.dts
new file mode 100644
index 0000000..c7f5fa0
--- /dev/null
+++ b/src/arm/intel/socfpga/socfpga_cyclone5_socdk.dts
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+ model = "Altera SOCFPGA Cyclone V SoC Development Kit";
+ compatible = "altr,socfpga-cyclone5-socdk", "altr,socfpga-cyclone5", "altr,socfpga";
+
+ chosen {
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1GB */
+ };
+
+ aliases {
+ /* this allow the ethaddr uboot environmnet variable contents
+ * to be added to the gmac1 device tree blob.
+ */
+ ethernet0 = &gmac1;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-hps0 {
+ label = "hps_led0";
+ gpios = <&portb 15 1>;
+ };
+
+ led-hps1 {
+ label = "hps_led1";
+ gpios = <&portb 14 1>;
+ };
+
+ led-hps2 {
+ label = "hps_led2";
+ gpios = <&portb 13 1>;
+ };
+
+ led-hps3 {
+ label = "hps_led3";
+ gpios = <&portb 12 1>;
+ };
+ };
+
+ regulator_3_3v: regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&can0 {
+ status = "okay";
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ txen-skew-ps = <0>;
+ txc-skew-ps = <2600>;
+ rxdv-skew-ps = <0>;
+ rxc-skew-ps = <2000>;
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ /*
+ * adjust the falling times to decrease the i2c frequency to 50Khz
+ * because the LCD module does not work at the standard 100Khz
+ */
+ i2c-sda-falling-time-ns = <5000>;
+ i2c-scl-falling-time-ns = <5000>;
+
+ eeprom@51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
+
+&mmc0 {
+ cd-gpios = <&portb 18 0>;
+ vmmc-supply = <®ulator_3_3v>;
+ vqmmc-supply = <®ulator_3_3v>;
+ status = "okay";
+};
+
+&qspi {
+ status = "okay";
+
+ flash0: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,mt25qu02g", "jedec,spi-nor";
+ reg = <0>; /* chip select */
+ spi-max-frequency = <100000000>;
+
+ m25p,fast-read;
+ cdns,page-size = <256>;
+ cdns,block-size = <16>;
+ cdns,read-delay = <4>;
+ cdns,tshsl-ns = <50>;
+ cdns,tsd2d-ns = <50>;
+ cdns,tchsh-ns = <4>;
+ cdns,tslch-ns = <4>;
+
+ partition@qspi-boot {
+ /* 8MB for raw data. */
+ label = "Flash 0 Raw Data";
+ reg = <0x0 0x800000>;
+ };
+
+ partition@qspi-rootfs {
+ /* 120MB for jffs2 data. */
+ label = "Flash 0 jffs2 Filesystem";
+ reg = <0x800000 0x7800000>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/src/arm/intel/socfpga/socfpga_cyclone5_sockit.dts b/src/arm/intel/socfpga/socfpga_cyclone5_sockit.dts
new file mode 100644
index 0000000..3dd99c7
--- /dev/null
+++ b/src/arm/intel/socfpga/socfpga_cyclone5_sockit.dts
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+ model = "Terasic SoCkit";
+ compatible = "terasic,socfpga-cyclone5-sockit", "altr,socfpga-cyclone5", "altr,socfpga";
+
+ chosen {
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1GB */
+ };
+
+ aliases {
+ /* this allow the ethaddr uboot environmnet variable contents
+ * to be added to the gmac1 device tree blob.
+ */
+ ethernet0 = &gmac1;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ hps_led0 {
+ label = "hps:blue:led0";
+ gpios = <&portb 24 0>; /* HPS_GPIO53 */
+ linux,default-trigger = "heartbeat";
+ };
+
+ hps_led1 {
+ label = "hps:blue:led1";
+ gpios = <&portb 25 0>; /* HPS_GPIO54 */
+ linux,default-trigger = "heartbeat";
+ };
+
+ hps_led2 {
+ label = "hps:blue:led2";
+ gpios = <&portb 26 0>; /* HPS_GPIO55 */
+ linux,default-trigger = "heartbeat";
+ };
+
+ hps_led3 {
+ label = "hps:blue:led3";
+ gpios = <&portb 27 0>; /* HPS_GPIO56 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ hps_sw0 {
+ label = "hps_sw0";
+ gpios = <&portc 20 0>; /* HPS_GPI7 */
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0x0>; /* SW_LID */
+ };
+
+ hps_sw1 {
+ label = "hps_sw1";
+ gpios = <&portc 19 0>; /* HPS_GPI6 */
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0x5>; /* SW_DOCK */
+ };
+
+ hps_sw2 {
+ label = "hps_sw2";
+ gpios = <&portc 18 0>; /* HPS_GPI5 */
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0xa>; /* SW_KEYPAD_SLIDE */
+ };
+
+ hps_sw3 {
+ label = "hps_sw3";
+ gpios = <&portc 17 0>; /* HPS_GPI4 */
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0xc>; /* SW_ROTATE_LOCK */
+ };
+
+ hps_hkey0 {
+ label = "hps_hkey0";
+ gpios = <&portc 21 1>; /* HPS_GPI8 */
+ linux,code = <187>; /* KEY_F17 */
+ };
+
+ hps_hkey1 {
+ label = "hps_hkey1";
+ gpios = <&portc 22 1>; /* HPS_GPI9 */
+ linux,code = <188>; /* KEY_F18 */
+ };
+
+ hps_hkey2 {
+ label = "hps_hkey2";
+ gpios = <&portc 23 1>; /* HPS_GPI10 */
+ linux,code = <189>; /* KEY_F19 */
+ };
+
+ hps_hkey3 {
+ label = "hps_hkey3";
+ gpios = <&portc 24 1>; /* HPS_GPI11 */
+ linux,code = <190>; /* KEY_F20 */
+ };
+ };
+
+ regulator_3_3v: regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ txen-skew-ps = <0>;
+ txc-skew-ps = <2600>;
+ rxdv-skew-ps = <0>;
+ rxc-skew-ps = <2000>;
+};
+
+&gpio0 { /* GPIO 0..29 */
+ status = "okay";
+};
+
+&gpio1 { /* GPIO 30..57 */
+ status = "okay";
+};
+
+&gpio2 { /* GPIO 58..66 (HLGPI 0..13 at offset 13) */
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ accel1: accelerometer@53 {
+ compatible = "adi,adxl345";
+ reg = <0x53>;
+
+ interrupt-parent = <&portc>;
+ interrupts = <3 2>;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <®ulator_3_3v>;
+ vqmmc-supply = <®ulator_3_3v>;
+ status = "okay";
+};
+
+&qspi {
+ status = "okay";
+
+ flash: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,mt25qu02g", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <100000000>;
+
+ m25p,fast-read;
+ cdns,page-size = <256>;
+ cdns,block-size = <16>;
+ cdns,read-delay = <4>;
+ cdns,tshsl-ns = <50>;
+ cdns,tsd2d-ns = <50>;
+ cdns,tchsh-ns = <4>;
+ cdns,tslch-ns = <4>;
+ };
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/src/arm/intel/socfpga/socfpga_cyclone5_socrates.dts b/src/arm/intel/socfpga/socfpga_cyclone5_socrates.dts
new file mode 100644
index 0000000..ca18b95
--- /dev/null
+++ b/src/arm/intel/socfpga/socfpga_cyclone5_socrates.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+ model = "EBV SOCrates";
+ compatible = "ebv,socrates", "altr,socfpga-cyclone5", "altr,socfpga";
+
+ aliases {
+ ethernet0 = &gmac1;
+ };
+
+ chosen {
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1GB */
+ };
+
+ leds: gpio-leds {
+ };
+};
+
+&gmac1 {
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ rtc: rtc@68 {
+ compatible = "st,m41t82";
+ reg = <0x68>;
+ };
+};
+
+&leds {
+ compatible = "gpio-leds";
+
+ led0 {
+ label = "led:green:heartbeat";
+ gpios = <&porta 28 1>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1 {
+ label = "led:green:D7";
+ gpios = <&portb 19 1>;
+ };
+
+ led2 {
+ label = "led:green:D8";
+ gpios = <&portb 25 1>;
+ };
+};
+
+&mmc {
+ status = "okay";
+};
+
+&qspi {
+ status = "okay";
+
+ flash: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q256a", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <100000000>;
+ m25p,fast-read;
+ cdns,read-delay = <4>;
+ cdns,tshsl-ns = <50>;
+ cdns,tsd2d-ns = <50>;
+ cdns,tchsh-ns = <4>;
+ cdns,tslch-ns = <4>;
+ status = "okay";
+ };
+};
diff --git a/src/arm/intel/socfpga/socfpga_cyclone5_sodia.dts b/src/arm/intel/socfpga/socfpga_cyclone5_sodia.dts
new file mode 100644
index 0000000..2564671
--- /dev/null
+++ b/src/arm/intel/socfpga/socfpga_cyclone5_sodia.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Altera SOCFPGA Cyclone V SoC Macnica Sodia board";
+ compatible = "macnica,sodia", "altr,socfpga-cyclone5", "altr,socfpga";
+
+ chosen {
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>;
+ };
+
+ aliases {
+ ethernet0 = &gmac1;
+ };
+
+ regulator_3_3v: regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ leds: gpio-leds {
+ compatible = "gpio-leds";
+
+ hps_led0 {
+ label = "hps:green:led0";
+ gpios = <&portb 12 GPIO_ACTIVE_LOW>;
+ };
+
+ hps_led1 {
+ label = "hps:green:led1";
+ gpios = <&portb 13 GPIO_ACTIVE_LOW>;
+ };
+
+ hps_led2 {
+ label = "hps:green:led2";
+ gpios = <&portb 14 GPIO_ACTIVE_LOW>;
+ };
+
+ hps_led3 {
+ label = "hps:green:led3";
+ gpios = <&portb 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy = <&phy0>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ rxdv-skew-ps = <0>;
+ rxc-skew-ps = <3000>;
+ txen-skew-ps = <0>;
+ txc-skew-ps = <3000>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
+
+&mmc0 {
+ cd-gpios = <&portb 18 0>;
+ vmmc-supply = <®ulator_3_3v>;
+ vqmmc-supply = <®ulator_3_3v>;
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&qspi {
+ status = "okay";
+
+ flash0: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q512a", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <100000000>;
+
+ m25p,fast-read;
+ cdns,page-size = <256>;
+ cdns,block-size = <16>;
+ cdns,read-delay = <4>;
+ cdns,tshsl-ns = <50>;
+ cdns,tsd2d-ns = <50>;
+ cdns,tchsh-ns = <4>;
+ cdns,tslch-ns = <4>;
+ };
+};
diff --git a/src/arm/intel/socfpga/socfpga_cyclone5_vining_fpga.dts b/src/arm/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
new file mode 100644
index 0000000..e0630b0
--- /dev/null
+++ b/src/arm/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "samtec VIN|ING FPGA";
+ compatible = "samtec,vining", "altr,socfpga-cyclone5", "altr,socfpga";
+
+ chosen {
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1GB */
+ };
+
+ aliases {
+ /*
+ * This allow the ethaddr uboot environment variable contents
+ * to be added to the gmac1 device tree blob.
+ */
+ ethernet0 = &gmac1;
+ ethernet1 = &gmac0;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ hps_temp0 {
+ label = "BTN_0"; /* TEMP_OS */
+ gpios = <&portc 18 GPIO_ACTIVE_LOW>; /* HPS_GPI5 */
+ linux,code = <BTN_0>;
+ };
+
+ hps_hkey0 {
+ label = "GP_SWITCH"; /* GP_SWITCH */
+ gpios = <&portc 19 GPIO_ACTIVE_LOW>; /* HPS_GPI6 */
+ linux,code = <BTN_1>;
+ };
+
+ hps_hkey1 {
+ label = "RESET_SWITCH"; /* RESET_SWITCH */
+ gpios = <&portc 20 GPIO_ACTIVE_LOW>; /* HPS_GPI7 */
+ linux,code = <BTN_2>;
+ };
+
+ hps_hkey2 {
+ label = "POWER_DOWN"; /* POWER_DOWN */
+ gpios = <&portc 4 GPIO_ACTIVE_LOW>; /* HPS_GPIO62 */
+ linux,code = <KEY_POWER>;
+ };
+
+ hps_hkey3 {
+ label = "SENSE"; /* SENSE */
+ gpios = <&porta 9 GPIO_ACTIVE_LOW>; /* HPS_GPIO9 */
+ linux,code = <BTN_3>;
+ };
+ };
+
+ regulator-usb-nrst {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_nrst";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&portb 5 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ regulator-always-on;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+
+ snps,reset-gpio = <&porta 0 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <10000 10000 10000>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ txd0-skew-ps = <0>;
+ txd1-skew-ps = <0>;
+ txd2-skew-ps = <0>;
+ txd3-skew-ps = <0>;
+ txen-skew-ps = <0>;
+ txc-skew-ps = <1860>;
+ rxdv-skew-ps = <0>;
+ rxc-skew-ps = <1860>;
+ };
+ };
+};
+
+&gpio0 { /* GPIO 0..29 */
+ status = "okay";
+};
+
+&gpio1 { /* GPIO 30..57 */
+ status = "okay";
+};
+
+&gpio2 { /* GPIO 58..66 (HLGPI 0..13 at offset 13) */
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ gpio: pca9557@1f {
+ compatible = "nxp,pca9557";
+ reg = <0x1f>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ temp: lm75@48 {
+ compatible = "lm75";
+ reg = <0x48>;
+ };
+
+ at24@50 {
+ compatible = "atmel,24c01";
+ pagesize = <8>;
+ reg = <0x50>;
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ i2c@6 { /* Backplane EEPROM */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ eeprom@51 {
+ compatible = "atmel,24c01";
+ pagesize = <8>;
+ reg = <0x51>;
+ };
+ };
+
+ i2c@7 { /* Power board EEPROM */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ eeprom@51 {
+ compatible = "atmel,24c01";
+ pagesize = <8>;
+ reg = <0x51>;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ at24@50 {
+ compatible = "atmel,24c02";
+ pagesize = <8>;
+ reg = <0x50>;
+ };
+};
+
+&qspi {
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q128", "jedec,spi-nor";
+ reg = <0>; /* chip select */
+ spi-max-frequency = <100000000>;
+ m25p,fast-read;
+
+ cdns,page-size = <256>;
+ cdns,block-size = <16>;
+ cdns,read-delay = <4>;
+ cdns,tshsl-ns = <50>;
+ cdns,tsd2d-ns = <50>;
+ cdns,tchsh-ns = <4>;
+ cdns,tslch-ns = <4>;
+ };
+
+ flash@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,mt25qu02g", "jedec,spi-nor";
+ reg = <1>; /* chip select */
+ spi-max-frequency = <100000000>;
+ m25p,fast-read;
+
+ cdns,page-size = <256>;
+ cdns,block-size = <16>;
+ cdns,read-delay = <4>;
+ cdns,tshsl-ns = <50>;
+ cdns,tsd2d-ns = <50>;
+ cdns,tchsh-ns = <4>;
+ cdns,tslch-ns = <4>;
+ };
+};
+
+&usb0 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb1 {
+ dr_mode = "peripheral";
+ status = "okay";
+};
diff --git a/src/arm/intel/socfpga/socfpga_vt.dts b/src/arm/intel/socfpga/socfpga_vt.dts
new file mode 100644
index 0000000..845ab2c
--- /dev/null
+++ b/src/arm/intel/socfpga/socfpga_vt.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ */
+
+/dts-v1/;
+#include "socfpga.dtsi"
+
+/ {
+ model = "Altera SOCFPGA VT";
+ compatible = "altr,socfpga-vt", "altr,socfpga";
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ memory@0 {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1 GB */
+ };
+
+ soc {
+ clkmgr@ffd04000 {
+ clocks {
+ osc1 {
+ clock-frequency = <10000000>;
+ };
+ };
+ };
+
+ mmc@ff704000 {
+ broken-cd;
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ };
+
+ ethernet@ff700000 {
+ phy-mode = "gmii";
+ status = "okay";
+ };
+
+ timer0@ffc08000 {
+ clock-frequency = <7000000>;
+ };
+
+ timer1@ffc09000 {
+ clock-frequency = <7000000>;
+ };
+
+ timer2@ffd00000 {
+ clock-frequency = <7000000>;
+ };
+
+ timer3@ffd01000 {
+ clock-frequency = <7000000>;
+ };
+
+ serial@ffc02000 {
+ clock-frequency = <7372800>;
+ };
+
+ serial@ffc03000 {
+ clock-frequency = <7372800>;
+ };
+
+ sysmgr@ffd08000 {
+ cpu1-start-addr = <0xffd08010>;
+ };
+ };
+};
+
+&gmac0 {
+ status = "okay";
+ phy-mode = "gmii";
+};