Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/arm/broadcom/bcm-cygnus-clock.dtsi b/src/arm/broadcom/bcm-cygnus-clock.dtsi
new file mode 100644
index 0000000..52f91a1
--- /dev/null
+++ b/src/arm/broadcom/bcm-cygnus-clock.dtsi
@@ -0,0 +1,133 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2014 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ /* Cygnus ARM PLL */
+ armpll: armpll@19000000 {
+ #clock-cells = <0>;
+ compatible = "brcm,cygnus-armpll";
+ clocks = <&osc>;
+ reg = <0x19000000 0x1000>;
+ };
+
+ /* peripheral clock for system timer */
+ periph_clk: arm_periph_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&armpll>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ /* APB bus clock */
+ apb_clk: apb_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&armpll>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+
+ genpll: genpll@301d000 {
+ #clock-cells = <1>;
+ compatible = "brcm,cygnus-genpll";
+ reg = <0x0301d000 0x2c>, <0x0301c020 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys",
+ "enet_sw", "audio_125", "can";
+ };
+
+ /* always 1/2 of the axi21 clock */
+ axi41_clk: axi41_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll 1>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ /* always 1/4 of the axi21 clock */
+ axi81_clk: axi81_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll 1>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+
+ lcpll0: lcpll0@301d02c {
+ #clock-cells = <1>;
+ compatible = "brcm,cygnus-lcpll0";
+ reg = <0x0301d02c 0x1c>, <0x0301c020 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "lcpll0", "pcie_phy", "ddr_phy", "sdio",
+ "usb_phy", "smart_card", "ch5";
+ };
+
+ mipipll: mipipll@180a9800 {
+ #clock-cells = <1>;
+ compatible = "brcm,cygnus-mipipll";
+ reg = <0x180a9800 0x2c>, <0x0301c020 0x4>, <0x180aa024 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "mipipll", "ch0_unused", "ch1_lcd",
+ "ch2_v3d", "ch3_unused", "ch4_unused",
+ "ch5_unused";
+ };
+
+ asiu_clks: asiu_clks@301d048 {
+ #clock-cells = <1>;
+ compatible = "brcm,cygnus-asiu-clk";
+ reg = <0x0301d048 0xc>, <0x180aa024 0x4>;
+
+ clocks = <&osc>;
+ clock-output-names = "keypad", "adc/touch", "pwm";
+ };
+
+ audiopll: audiopll@180aeb00 {
+ #clock-cells = <1>;
+ compatible = "brcm,cygnus-audiopll";
+ reg = <0x180aeb00 0x68>;
+ clocks = <&osc>;
+ clock-output-names = "audiopll", "ch0_audio",
+ "ch1_audio", "ch2_audio";
+ };
+};