Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/src/arm/amlogic/meson8b.dtsi b/src/arm/amlogic/meson8b.dtsi
new file mode 100644
index 0000000..5198f51
--- /dev/null
+++ b/src/arm/amlogic/meson8b.dtsi
@@ -0,0 +1,781 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+#include <dt-bindings/clock/meson8-ddr-clkc.h>
+#include <dt-bindings/clock/meson8b-clkc.h>
+#include <dt-bindings/gpio/meson8b-gpio.h>
+#include <dt-bindings/power/meson8-power.h>
+#include <dt-bindings/reset/amlogic,meson8b-reset.h>
+#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "meson.dtsi"
+
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ next-level-cache = <&L2>;
+ reg = <0x200>;
+ enable-method = "amlogic,meson8b-smp";
+ resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPUCLK>;
+ #cooling-cells = <2>; /* min followed by max */
+ };
+
+ cpu1: cpu@201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ next-level-cache = <&L2>;
+ reg = <0x201>;
+ enable-method = "amlogic,meson8b-smp";
+ resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPUCLK>;
+ #cooling-cells = <2>; /* min followed by max */
+ };
+
+ cpu2: cpu@202 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ next-level-cache = <&L2>;
+ reg = <0x202>;
+ enable-method = "amlogic,meson8b-smp";
+ resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPUCLK>;
+ #cooling-cells = <2>; /* min followed by max */
+ };
+
+ cpu3: cpu@203 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ next-level-cache = <&L2>;
+ reg = <0x203>;
+ enable-method = "amlogic,meson8b-smp";
+ resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPUCLK>;
+ #cooling-cells = <2>; /* min followed by max */
+ };
+ };
+
+ cpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-96000000 {
+ opp-hz = /bits/ 64 <96000000>;
+ opp-microvolt = <860000>;
+ };
+ opp-192000000 {
+ opp-hz = /bits/ 64 <192000000>;
+ opp-microvolt = <860000>;
+ };
+ opp-312000000 {
+ opp-hz = /bits/ 64 <312000000>;
+ opp-microvolt = <860000>;
+ };
+ opp-408000000 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <860000>;
+ };
+ opp-504000000 {
+ opp-hz = /bits/ 64 <504000000>;
+ opp-microvolt = <860000>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <860000>;
+ };
+ opp-720000000 {
+ opp-hz = /bits/ 64 <720000000>;
+ opp-microvolt = <860000>;
+ };
+ opp-816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <900000>;
+ };
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1140000>;
+ };
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1140000>;
+ };
+ opp-1320000000 {
+ opp-hz = /bits/ 64 <1320000000>;
+ opp-microvolt = <1140000>;
+ };
+ opp-1488000000 {
+ opp-hz = /bits/ 64 <1488000000>;
+ opp-microvolt = <1140000>;
+ };
+ opp-1536000000 {
+ opp-hz = /bits/ 64 <1536000000>;
+ opp-microvolt = <1140000>;
+ };
+ };
+
+ gpu_opp_table: opp-table-gpu {
+ compatible = "operating-points-v2";
+
+ opp-255000000 {
+ opp-hz = /bits/ 64 <255000000>;
+ opp-microvolt = <1100000>;
+ };
+ opp-364285714 {
+ opp-hz = /bits/ 64 <364285714>;
+ opp-microvolt = <1100000>;
+ };
+ opp-425000000 {
+ opp-hz = /bits/ 64 <425000000>;
+ opp-microvolt = <1100000>;
+ };
+ opp-510000000 {
+ opp-hz = /bits/ 64 <510000000>;
+ opp-microvolt = <1100000>;
+ };
+ opp-637500000 {
+ opp-hz = /bits/ 64 <637500000>;
+ opp-microvolt = <1100000>;
+ turbo-mode;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a5-pmu";
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* 2 MiB reserved for Hardware ROM Firmware? */
+ hwrom@0 {
+ reg = <0x0 0x200000>;
+ no-map;
+ };
+ };
+
+ thermal-zones {
+ soc {
+ polling-delay-passive = <250>; /* milliseconds */
+ polling-delay = <1000>; /* milliseconds */
+ thermal-sensors = <&thermal_sensor>;
+
+ cooling-maps {
+ map0 {
+ trip = <&soc_passive>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ trip = <&soc_hot>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
+ trips {
+ soc_passive: soc-passive {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+
+ soc_hot: soc-hot {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "hot";
+ };
+
+ soc_critical: soc-critical {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+ };
+ };
+
+ mmcbus: bus@c8000000 {
+ compatible = "simple-bus";
+ reg = <0xc8000000 0x8000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc8000000 0x8000>;
+
+ ddr_clkc: clock-controller@400 {
+ compatible = "amlogic,meson8b-ddr-clkc";
+ reg = <0x400 0x20>;
+ clocks = <&xtal>;
+ clock-names = "xtal";
+ #clock-cells = <1>;
+ };
+
+ dmcbus: bus@6000 {
+ compatible = "simple-bus";
+ reg = <0x6000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6000 0x400>;
+
+ canvas: video-lut@48 {
+ compatible = "amlogic,meson8b-canvas",
+ "amlogic,canvas";
+ reg = <0x48 0x14>;
+ };
+ };
+ };
+
+ apb: bus@d0000000 {
+ compatible = "simple-bus";
+ reg = <0xd0000000 0x200000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xd0000000 0x200000>;
+
+ mali: gpu@c0000 {
+ compatible = "amlogic,meson8b-mali", "arm,mali-450";
+ reg = <0xc0000 0x40000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp", "gpmmu", "pp", "pmu",
+ "pp0", "ppmmu0", "pp1", "ppmmu1";
+ resets = <&reset RESET_MALI>;
+ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+ clock-names = "bus", "core";
+ operating-points-v2 = <&gpu_opp_table>;
+ #cooling-cells = <2>; /* min followed by max */
+ };
+ };
+}; /* end of / */
+
+&aiu {
+ compatible = "amlogic,aiu-meson8b", "amlogic,aiu";
+ clocks = <&clkc CLKID_AIU_GLUE>,
+ <&clkc CLKID_I2S_OUT>,
+ <&clkc CLKID_AOCLK_GATE>,
+ <&clkc CLKID_CTS_AMCLK>,
+ <&clkc CLKID_MIXER_IFACE>,
+ <&clkc CLKID_IEC958>,
+ <&clkc CLKID_IEC958_GATE>,
+ <&clkc CLKID_CTS_MCLK_I958>,
+ <&clkc CLKID_CTS_I958>;
+ clock-names = "pclk",
+ "i2s_pclk",
+ "i2s_aoclk",
+ "i2s_mclk",
+ "i2s_mixer",
+ "spdif_pclk",
+ "spdif_aoclk",
+ "spdif_mclk",
+ "spdif_mclk_sel";
+ resets = <&reset RESET_AIU>;
+};
+
+&aobus {
+ pmu: pmu@e0 {
+ compatible = "amlogic,meson8b-pmu", "syscon";
+ reg = <0xe0 0x18>;
+ };
+
+ pinctrl_aobus: pinctrl@84 {
+ compatible = "amlogic,meson8b-aobus-pinctrl";
+ reg = <0x84 0xc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio_ao: ao-bank@14 {
+ reg = <0x14 0x4>,
+ <0x2c 0x4>,
+ <0x24 0x8>;
+ reg-names = "mux", "pull", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_aobus 0 0 16>;
+ };
+
+ i2s_am_clk_pins: i2s-am-clk-out {
+ mux {
+ groups = "i2s_am_clk_out";
+ function = "i2s";
+ bias-disable;
+ };
+ };
+
+ i2s_out_ao_clk_pins: i2s-ao-clk-out {
+ mux {
+ groups = "i2s_ao_clk_out";
+ function = "i2s";
+ bias-disable;
+ };
+ };
+
+ i2s_out_lr_clk_pins: i2s-lr-clk-out {
+ mux {
+ groups = "i2s_lr_clk_out";
+ function = "i2s";
+ bias-disable;
+ };
+ };
+
+ i2s_out_ch01_ao_pins: i2s-out-ch01 {
+ mux {
+ groups = "i2s_out_01";
+ function = "i2s";
+ bias-disable;
+ };
+ };
+
+ spdif_out_1_pins: spdif-out-1 {
+ mux {
+ groups = "spdif_out_1";
+ function = "spdif_1";
+ bias-disable;
+ };
+ };
+
+ uart_ao_a_pins: uart_ao_a {
+ mux {
+ groups = "uart_tx_ao_a", "uart_rx_ao_a";
+ function = "uart_ao";
+ bias-disable;
+ };
+ };
+
+ ir_recv_pins: remote {
+ mux {
+ groups = "remote_input";
+ function = "remote";
+ bias-disable;
+ };
+ };
+ };
+};
+
+&ao_arc_rproc {
+ compatible = "amlogic,meson8b-ao-arc", "amlogic,meson-mx-ao-arc";
+ amlogic,secbus2 = <&secbus2>;
+ sram = <&ao_arc_sram>;
+ resets = <&reset RESET_MEDIA_CPU>;
+ clocks = <&clkc CLKID_AO_MEDIA_CPU>;
+};
+
+&cbus {
+ reset: reset-controller@4404 {
+ compatible = "amlogic,meson8b-reset";
+ reg = <0x4404 0x9c>;
+ #reset-cells = <1>;
+ };
+
+ analog_top: analog-top@81a8 {
+ compatible = "amlogic,meson8b-analog-top", "syscon";
+ reg = <0x81a8 0x14>;
+ };
+
+ pwm_ef: pwm@86c0 {
+ compatible = "amlogic,meson8b-pwm";
+ reg = <0x86c0 0x10>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ clock-measure@8758 {
+ compatible = "amlogic,meson8b-clk-measure";
+ reg = <0x8758 0x1c>;
+ };
+
+ pinctrl_cbus: pinctrl@9880 {
+ compatible = "amlogic,meson8b-cbus-pinctrl";
+ reg = <0x9880 0x10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio: banks@80b0 {
+ reg = <0x80b0 0x28>,
+ <0x80e8 0x18>,
+ <0x8120 0x18>,
+ <0x8030 0x38>;
+ reg-names = "mux", "pull", "pull-enable", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_cbus 0 0 83>;
+ };
+
+ eth_rgmii_pins: eth-rgmii {
+ mux {
+ groups = "eth_tx_clk",
+ "eth_tx_en",
+ "eth_txd1_0",
+ "eth_txd0_0",
+ "eth_rx_clk",
+ "eth_rx_dv",
+ "eth_rxd1",
+ "eth_rxd0",
+ "eth_mdio_en",
+ "eth_mdc",
+ "eth_ref_clk",
+ "eth_txd2",
+ "eth_txd3",
+ "eth_rxd3",
+ "eth_rxd2";
+ function = "ethernet";
+ bias-disable;
+ };
+ };
+
+ eth_rmii_pins: eth-rmii {
+ mux {
+ groups = "eth_tx_en",
+ "eth_txd1_0",
+ "eth_txd0_0",
+ "eth_rx_clk",
+ "eth_rx_dv",
+ "eth_rxd1",
+ "eth_rxd0",
+ "eth_mdio_en",
+ "eth_mdc";
+ function = "ethernet";
+ bias-disable;
+ };
+ };
+
+ i2c_a_pins: i2c-a {
+ mux {
+ groups = "i2c_sda_a", "i2c_sck_a";
+ function = "i2c_a";
+ bias-disable;
+ };
+ };
+
+ sd_b_pins: sd-b {
+ mux {
+ groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
+ "sd_d3_b", "sd_clk_b", "sd_cmd_b";
+ function = "sd_b";
+ bias-disable;
+ };
+ };
+
+ sdxc_c_pins: sdxc-c {
+ mux {
+ groups = "sdxc_d0_c", "sdxc_d13_c",
+ "sdxc_d47_c", "sdxc_clk_c",
+ "sdxc_cmd_c";
+ function = "sdxc_c";
+ bias-pull-up;
+ };
+ };
+
+ pwm_c1_pins: pwm-c1 {
+ mux {
+ groups = "pwm_c1";
+ function = "pwm_c";
+ bias-disable;
+ };
+ };
+
+ pwm_d_pins: pwm-d {
+ mux {
+ groups = "pwm_d";
+ function = "pwm_d";
+ bias-disable;
+ };
+ };
+
+ uart_b0_pins: uart-b0 {
+ mux {
+ groups = "uart_tx_b0",
+ "uart_rx_b0";
+ function = "uart_b";
+ bias-disable;
+ };
+ };
+
+ uart_b0_cts_rts_pins: uart-b0-cts-rts {
+ mux {
+ groups = "uart_cts_b0",
+ "uart_rts_b0";
+ function = "uart_b";
+ bias-disable;
+ };
+ };
+ };
+};
+
+&ahb_sram {
+ ao_arc_sram: ao-arc-sram@0 {
+ compatible = "amlogic,meson8b-ao-arc-sram";
+ reg = <0x0 0x8000>;
+ pool;
+ };
+
+ smp-sram@1ff80 {
+ compatible = "amlogic,meson8b-smp-sram";
+ reg = <0x1ff80 0x8>;
+ };
+};
+
+
+&efuse {
+ compatible = "amlogic,meson8b-efuse";
+ clocks = <&clkc CLKID_EFUSE>;
+ clock-names = "core";
+
+ temperature_calib: calib@1f4 {
+ /* only the upper two bytes are relevant */
+ reg = <0x1f4 0x4>;
+ };
+};
+
+ðmac {
+ compatible = "amlogic,meson8b-dwmac", "snps,dwmac-3.70a", "snps,dwmac";
+
+ reg = <0xc9410000 0x10000
+ 0xc1108140 0x4>;
+
+ clocks = <&clkc CLKID_ETH>,
+ <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
+ rx-fifo-depth = <4096>;
+ tx-fifo-depth = <2048>;
+
+ resets = <&reset RESET_ETHERNET>;
+ reset-names = "stmmaceth";
+
+ power-domains = <&pwrc PWRC_MESON8_ETHERNET_MEM_ID>;
+};
+
+&gpio_intc {
+ compatible = "amlogic,meson8b-gpio-intc",
+ "amlogic,meson-gpio-intc";
+ status = "okay";
+};
+
+&hhi {
+ clkc: clock-controller {
+ compatible = "amlogic,meson8b-clkc";
+ clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>;
+ clock-names = "xtal", "ddr_pll";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pwrc: power-controller {
+ compatible = "amlogic,meson8b-pwrc";
+ #power-domain-cells = <1>;
+ amlogic,ao-sysctrl = <&pmu>;
+ resets = <&reset RESET_DBLK>,
+ <&reset RESET_PIC_DC>,
+ <&reset RESET_HDMI_APB>,
+ <&reset RESET_HDMI_SYSTEM_RESET>,
+ <&reset RESET_VENCI>,
+ <&reset RESET_VENCP>,
+ <&reset RESET_VDAC_4>,
+ <&reset RESET_VENCL>,
+ <&reset RESET_VIU>,
+ <&reset RESET_VENC>,
+ <&reset RESET_RDMA>;
+ reset-names = "dblk", "pic_dc", "hdmi_apb", "hdmi_system",
+ "venci", "vencp", "vdac", "vencl", "viu",
+ "venc", "rdma";
+ clocks = <&clkc CLKID_VPU>;
+ clock-names = "vpu";
+ assigned-clocks = <&clkc CLKID_VPU>;
+ assigned-clock-rates = <182142857>;
+ };
+};
+
+&hwrng {
+ compatible = "amlogic,meson8b-rng", "amlogic,meson-rng";
+ clocks = <&clkc CLKID_RNG0>;
+ clock-names = "core";
+};
+
+&i2c_AO {
+ clocks = <&clkc CLKID_CLK81>;
+};
+
+&i2c_A {
+ clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_B {
+ clocks = <&clkc CLKID_I2C>;
+};
+
+&L2 {
+ arm,data-latency = <3 3 3>;
+ arm,tag-latency = <2 2 2>;
+ arm,filter-ranges = <0x100000 0xc0000000>;
+ prefetch-data = <1>;
+ prefetch-instr = <1>;
+ arm,prefetch-offset = <7>;
+ arm,double-linefill = <1>;
+ arm,prefetch-drop = <1>;
+ arm,shared-override;
+};
+
+&periph {
+ scu@0 {
+ compatible = "arm,cortex-a5-scu";
+ reg = <0x0 0x100>;
+ };
+
+ timer@200 {
+ compatible = "arm,cortex-a5-global-timer";
+ reg = <0x200 0x20>;
+ interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+ clocks = <&clkc CLKID_PERIPH>;
+
+ /*
+ * the arm_global_timer driver currently does not handle clock
+ * rate changes. Keep it disabled for now.
+ */
+ status = "disabled";
+ };
+
+ timer@600 {
+ compatible = "arm,cortex-a5-twd-timer";
+ reg = <0x600 0x20>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+ clocks = <&clkc CLKID_PERIPH>;
+ };
+};
+
+&pwm_ab {
+ compatible = "amlogic,meson8b-pwm";
+};
+
+&pwm_cd {
+ compatible = "amlogic,meson8b-pwm";
+};
+
+&rtc {
+ compatible = "amlogic,meson8b-rtc";
+ resets = <&reset RESET_RTC>;
+};
+
+&saradc {
+ compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc";
+ clocks = <&xtal>, <&clkc CLKID_SAR_ADC>;
+ clock-names = "clkin", "core";
+ amlogic,hhi-sysctrl = <&hhi>;
+ nvmem-cells = <&temperature_calib>;
+ nvmem-cell-names = "temperature_calib";
+};
+
+&sdhc {
+ compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
+ clocks = <&xtal>,
+ <&clkc CLKID_FCLK_DIV4>,
+ <&clkc CLKID_FCLK_DIV3>,
+ <&clkc CLKID_FCLK_DIV5>,
+ <&clkc CLKID_SDHC>;
+ clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
+};
+
+&secbus {
+ secbus2: system-controller@4000 {
+ compatible = "amlogic,meson8b-secbus2", "syscon";
+ reg = <0x4000 0x2000>;
+ };
+};
+
+&sdio {
+ compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio";
+ clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
+ clock-names = "core", "clkin";
+};
+
+&timer_abcde {
+ clocks = <&xtal>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "pclk";
+};
+
+&uart_AO {
+ compatible = "amlogic,meson8b-uart", "amlogic,meson-ao-uart";
+ clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_A {
+ compatible = "amlogic,meson8b-uart";
+ clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+ compatible = "amlogic,meson8b-uart";
+ clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_C {
+ compatible = "amlogic,meson8b-uart";
+ clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>;
+ clock-names = "xtal", "pclk", "baud";
+};
+
+&usb0 {
+ compatible = "amlogic,meson8b-usb", "snps,dwc2";
+ clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
+ clock-names = "otg";
+};
+
+&usb1 {
+ compatible = "amlogic,meson8b-usb", "snps,dwc2";
+ clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+ clock-names = "otg";
+};
+
+&usb0_phy {
+ compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy";
+ clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+ clock-names = "usb_general", "usb";
+ resets = <&reset RESET_USB_OTG>;
+};
+
+&usb1_phy {
+ compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy";
+ clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
+ clock-names = "usb_general", "usb";
+ resets = <&reset RESET_USB_OTG>;
+};
+
+&wdt {
+ compatible = "amlogic,meson8b-wdt";
+};