Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/writing-bindings.rst b/Bindings/writing-bindings.rst
new file mode 100644
index 0000000..1ad081d
--- /dev/null
+++ b/Bindings/writing-bindings.rst
@@ -0,0 +1,93 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================================================
+DOs and DON'Ts for designing and writing Devicetree bindings
+============================================================
+
+This is a list of common review feedback items focused on binding design. With
+every rule, there are exceptions and bindings have many gray areas.
+
+For guidelines related to patches, see
+Documentation/devicetree/bindings/submitting-patches.rst
+
+
+Overall design
+==============
+
+- DO attempt to make bindings complete even if a driver doesn't support some
+ features. For example, if a device has an interrupt, then include the
+ 'interrupts' property even if the driver is only polled mode.
+
+- DON'T refer to Linux or "device driver" in bindings. Bindings should be
+ based on what the hardware has, not what an OS and driver currently support.
+
+- DO use node names matching the class of the device. Many standard names are
+ defined in the DT Spec. If there isn't one, consider adding it.
+
+- DO check that the example matches the documentation especially after making
+ review changes.
+
+- DON'T create nodes just for the sake of instantiating drivers. Multi-function
+ devices only need child nodes when the child nodes have their own DT
+ resources. A single node can be multiple providers (e.g. clocks and resets).
+
+- DON'T use 'syscon' alone without a specific compatible string. A 'syscon'
+ hardware block should have a compatible string unique enough to infer the
+ register layout of the entire block (at a minimum).
+
+
+Properties
+==========
+
+- DO make 'compatible' properties specific. DON'T use wildcards in compatible
+ strings. DO use fallback compatibles when devices are the same as or a subset
+ of prior implementations. DO add new compatibles in case there are new
+ features or bugs.
+
+- DO use a vendor prefix on device-specific property names. Consider if
+ properties could be common among devices of the same class. Check other
+ existing bindings for similar devices.
+
+- DON'T redefine common properties. Just reference the definition and define
+ constraints specific to the device.
+
+- DO use common property unit suffixes for properties with scientific units.
+ Recommended suffixes are listed at
+ https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/property-units.yaml
+
+- DO define properties in terms of constraints. How many entries? What are
+ possible values? What is the order?
+
+Typical cases and caveats
+=========================
+
+- Phandle entries, like clocks/dmas/interrupts/resets, should always be
+ explicitly ordered. Include the {clock,dma,interrupt,reset}-names if there is
+ more than one phandle. When used, both of these fields need the same
+ constraints (e.g. list of items).
+
+- For names used in {clock,dma,interrupt,reset}-names, do not add any suffix,
+ e.g.: "tx" instead of "txirq" (for interrupt).
+
+- Properties without schema types (e.g. without standard suffix or not defined
+ by schema) need the type, even if this is an enum.
+
+- If schema includes other schema (e.g. /schemas/i2c/i2c-controller.yaml) use
+ "unevaluatedProperties:false". In other cases, usually use
+ "additionalProperties:false".
+
+- For sub-blocks/components of bigger device (e.g. SoC blocks) use rather
+ device-based compatible (e.g. SoC-based compatible), instead of custom
+ versioning of that component.
+ For example use "vendor,soc1234-i2c" instead of "vendor,i2c-v2".
+
+- "syscon" is not a generic property. Use vendor and type, e.g.
+ "vendor,power-manager-syscon".
+
+Board/SoC .dts Files
+====================
+
+- DO put all MMIO devices under a bus node and not at the top-level.
+
+- DO use non-empty 'ranges' to limit the size of child buses/devices. 64-bit
+ platforms don't need all devices to have 64-bit address and size.