Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/watchdog/starfive,jh7100-wdt.yaml b/Bindings/watchdog/starfive,jh7100-wdt.yaml
new file mode 100644
index 0000000..68f3f6f
--- /dev/null
+++ b/Bindings/watchdog/starfive,jh7100-wdt.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/starfive,jh7100-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive Watchdog for JH7100 and JH7110 SoC
+
+maintainers:
+ - Xingyu Wu <xingyu.wu@starfivetech.com>
+ - Samin Guo <samin.guo@starfivetech.com>
+
+description:
+ The JH7100 and JH7110 watchdog both are 32 bit counters. JH7100 watchdog
+ has only one timeout phase and reboots. And JH7110 watchdog has two
+ timeout phases. At the first phase, the signal of watchdog interrupt
+ output(WDOGINT) will rise when counter is 0. The counter will reload
+ the timeout value. And then, if counter decreases to 0 again and WDOGINT
+ isn't cleared, the watchdog will reset the system unless the watchdog
+ reset is disabled.
+
+allOf:
+ - $ref: watchdog.yaml#
+
+properties:
+ compatible:
+ enum:
+ - starfive,jh7100-wdt
+ - starfive,jh7110-wdt
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: APB clock
+ - description: Core clock
+
+ clock-names:
+ items:
+ - const: apb
+ - const: core
+
+ resets:
+ items:
+ - description: APB reset
+ - description: Core reset
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ watchdog@12480000 {
+ compatible = "starfive,jh7100-wdt";
+ reg = <0x12480000 0x10000>;
+ clocks = <&clk 171>,
+ <&clk 172>;
+ clock-names = "apb", "core";
+ resets = <&rst 99>,
+ <&rst 100>;
+ };