Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/usb/snps,dwc3.yaml b/Bindings/usb/snps,dwc3.yaml
new file mode 100644
index 0000000..ee5af4b
--- /dev/null
+++ b/Bindings/usb/snps,dwc3.yaml
@@ -0,0 +1,490 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/snps,dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare USB3 Controller
+
+maintainers:
+ - Felipe Balbi <balbi@kernel.org>
+
+description:
+ This is usually a subnode to DWC3 glue to which it is connected, but can also
+ be presented as a standalone DT node with an optional vendor-specific
+ compatible string.
+
+allOf:
+ - $ref: usb-drd.yaml#
+ - if:
+ properties:
+ dr_mode:
+ const: peripheral
+
+ required:
+ - dr_mode
+ then:
+ $ref: usb.yaml#
+ else:
+ $ref: usb-xhci.yaml#
+
+properties:
+ compatible:
+ contains:
+ oneOf:
+ - const: snps,dwc3
+ - const: synopsys,dwc3
+ deprecated: true
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description:
+ It's either a single common DWC3 interrupt (dwc_usb3) or individual
+ interrupts for the host, gadget and DRD modes.
+ minItems: 1
+ maxItems: 4
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 4
+ oneOf:
+ - const: dwc_usb3
+ - items:
+ enum: [host, peripheral, otg, wakeup]
+
+ clocks:
+ description:
+ In general the core supports three types of clocks. bus_early is a
+ SoC Bus Clock (AHB/AXI/Native). ref generates ITP when the UTMI/ULPI
+ PHY is suspended. suspend clocks a small part of the USB3 core when
+ SS PHY in P3. But particular cases may differ from that having less
+ or more clock sources with another names.
+
+ clock-names:
+ contains:
+ anyOf:
+ - enum: [bus_early, ref, suspend]
+ - true
+
+ dma-coherent: true
+
+ extcon:
+ maxItems: 1
+ deprecated: true
+
+ iommus:
+ maxItems: 1
+
+ usb-phy:
+ minItems: 1
+ items:
+ - description: USB2/HS PHY
+ - description: USB3/SS PHY
+
+ phys:
+ minItems: 1
+ maxItems: 2
+
+ phy-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ enum:
+ - usb2-phy
+ - usb3-phy
+
+ power-domains:
+ description:
+ The DWC3 has 2 power-domains. The power management unit (PMU) and
+ everything else. The PMU is typically always powered and may not have an
+ entry.
+ minItems: 1
+ items:
+ - description: Core
+ - description: Power management unit
+
+ resets:
+ minItems: 1
+
+ snps,usb2-lpm-disable:
+ description: Indicate if we don't want to enable USB2 HW LPM for host
+ mode.
+ type: boolean
+
+ snps,usb3_lpm_capable:
+ description: Determines if platform is USB3 LPM capable
+ type: boolean
+
+ snps,usb2-gadget-lpm-disable:
+ description: Indicate if we don't want to enable USB2 HW LPM for gadget
+ mode.
+ type: boolean
+
+ snps,dis-start-transfer-quirk:
+ description:
+ When set, disable isoc START TRANSFER command failure SW work-around
+ for DWC_usb31 version 1.70a-ea06 and prior.
+ type: boolean
+
+ snps,disable_scramble_quirk:
+ description:
+ True when SW should disable data scrambling. Only really useful for FPGA
+ builds.
+ type: boolean
+
+ snps,has-lpm-erratum:
+ description: True when DWC3 was configured with LPM Erratum enabled
+ type: boolean
+
+ snps,lpm-nyet-threshold:
+ description: LPM NYET threshold
+ $ref: /schemas/types.yaml#/definitions/uint8
+
+ snps,u2exit_lfps_quirk:
+ description: Set if we want to enable u2exit lfps quirk
+ type: boolean
+
+ snps,u2ss_inp3_quirk:
+ description: Set if we enable P3 OK for U2/SS Inactive quirk
+ type: boolean
+
+ snps,req_p1p2p3_quirk:
+ description:
+ When set, the core will always request for P1/P2/P3 transition sequence.
+ type: boolean
+
+ snps,del_p1p2p3_quirk:
+ description:
+ When set core will delay P1/P2/P3 until a certain amount of 8B10B errors
+ occur.
+ type: boolean
+
+ snps,del_phy_power_chg_quirk:
+ description: When set core will delay PHY power change from P0 to P1/P2/P3.
+ type: boolean
+
+ snps,lfps_filter_quirk:
+ description: When set core will filter LFPS reception.
+ type: boolean
+
+ snps,rx_detect_poll_quirk:
+ description:
+ when set core will disable a 400us delay to start Polling LFPS after
+ RX.Detect.
+ type: boolean
+
+ snps,tx_de_emphasis_quirk:
+ description: When set core will set Tx de-emphasis value
+ type: boolean
+
+ snps,tx_de_emphasis:
+ description:
+ The value driven to the PHY is controlled by the LTSSM during USB3
+ Compliance mode.
+ $ref: /schemas/types.yaml#/definitions/uint8
+ enum:
+ - 0 # -6dB de-emphasis
+ - 1 # -3.5dB de-emphasis
+ - 2 # No de-emphasis
+
+ snps,dis_u3_susphy_quirk:
+ description: When set core will disable USB3 suspend phy
+ type: boolean
+
+ snps,dis_u2_susphy_quirk:
+ description: When set core will disable USB2 suspend phy
+ type: boolean
+
+ snps,dis_enblslpm_quirk:
+ description:
+ When set clears the enblslpm in GUSB2PHYCFG, disabling the suspend signal
+ to the PHY.
+ type: boolean
+
+ snps,dis-u1-entry-quirk:
+ description: Set if link entering into U1 needs to be disabled
+ type: boolean
+
+ snps,dis-u2-entry-quirk:
+ description: Set if link entering into U2 needs to be disabled
+ type: boolean
+
+ snps,dis_rxdet_inp3_quirk:
+ description:
+ When set core will disable receiver detection in PHY P3 power state.
+ type: boolean
+
+ snps,dis-u2-freeclk-exists-quirk:
+ description:
+ When set, clear the u2_freeclk_exists in GUSB2PHYCFG, specify that USB2
+ PHY doesn't provide a free-running PHY clock.
+ type: boolean
+
+ snps,dis-del-phy-power-chg-quirk:
+ description:
+ When set core will change PHY power from P0 to P1/P2/P3 without delay.
+ type: boolean
+
+ snps,dis-tx-ipgap-linecheck-quirk:
+ description: When set, disable u2mac linestate check during HS transmit
+ type: boolean
+
+ snps,parkmode-disable-ss-quirk:
+ description:
+ When set, all SuperSpeed bus instances in park mode are disabled.
+ type: boolean
+
+ snps,parkmode-disable-hs-quirk:
+ description:
+ When set, all HighSpeed bus instances in park mode are disabled.
+ type: boolean
+
+ snps,dis_metastability_quirk:
+ description:
+ When set, disable metastability workaround. CAUTION! Use only if you are
+ absolutely sure of it.
+ type: boolean
+
+ snps,dis-split-quirk:
+ description:
+ When set, change the way URBs are handled by the driver. Needed to
+ avoid -EPROTO errors with usbhid on some devices (Hikey 970).
+ type: boolean
+
+ snps,gfladj-refclk-lpm-sel-quirk:
+ description:
+ When set, run the SOF/ITP counter based on ref_clk.
+ type: boolean
+
+ snps,resume-hs-terminations:
+ description:
+ Fix the issue of HS terminations CRC error on resume by enabling this
+ quirk. When set, all the termsel, xcvrsel, opmode becomes 0 during end
+ of resume. This option is to support certain legacy ULPI PHYs.
+ type: boolean
+
+ snps,ulpi-ext-vbus-drv:
+ description:
+ Some ULPI USB PHY does not support internal VBUS supply, and driving
+ the CPEN pin, requires the configuration of the ulpi DRVVBUSEXTERNAL
+ bit. When set, the xhci host will configure the USB2 PHY drives VBUS
+ with an external supply.
+ type: boolean
+
+ snps,is-utmi-l1-suspend:
+ description:
+ True when DWC3 asserts output signal utmi_l1_suspend_n, false when
+ asserts utmi_sleep_n.
+ type: boolean
+
+ snps,hird-threshold:
+ description: HIRD threshold
+ $ref: /schemas/types.yaml#/definitions/uint8
+
+ snps,hsphy_interface:
+ description:
+ High-Speed PHY interface selection between UTMI+ and ULPI when the
+ DWC_USB3_HSPHY_INTERFACE has value 3.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [utmi, ulpi]
+
+ snps,quirk-frame-length-adjustment:
+ description:
+ Value for GFLADJ_30MHZ field of GFLADJ register for post-silicon frame
+ length adjustment when the fladj_30mhz_sdbnd signal is invalid or
+ incorrect.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 0x3f
+
+ snps,ref-clock-period-ns:
+ description:
+ Value for REFCLKPER field of GUCTL register for reference clock period in
+ nanoseconds, when the hardware set default does not match the actual
+ clock.
+
+ This binding is deprecated. Instead, provide an appropriate reference clock.
+ minimum: 8
+ maximum: 62
+ deprecated: true
+
+ snps,rx-thr-num-pkt:
+ description:
+ USB RX packet threshold count. In host mode, this field specifies
+ the space that must be available in the RX FIFO before the core can
+ start the corresponding USB RX transaction (burst).
+ In device mode, this field specifies the space that must be
+ available in the RX FIFO before the core can send ERDY for a
+ flow-controlled endpoint. It is only used for SuperSpeed.
+ The valid values for this field are from 1 to 15. (DWC3 SuperSpeed
+ USB 3.0 Controller Databook)
+ $ref: /schemas/types.yaml#/definitions/uint8
+ minimum: 1
+ maximum: 15
+
+ snps,rx-max-burst:
+ description:
+ Max USB RX burst size. In host mode, this field specifies the
+ Maximum Bulk IN burst the DWC_usb3 core can perform. When the system
+ bus is slower than the USB, RX FIFO can overrun during a long burst.
+ You can program a smaller value to this field to limit the RX burst
+ size that the core can perform. It only applies to SS Bulk,
+ Isochronous, and Interrupt IN endpoints in the host mode.
+ In device mode, this field specifies the NUMP value that is sent in
+ ERDY for an OUT endpoint.
+ The valid values for this field are from 1 to 16. (DWC3 SuperSpeed
+ USB 3.0 Controller Databook)
+ $ref: /schemas/types.yaml#/definitions/uint8
+ minimum: 1
+ maximum: 16
+
+ snps,tx-thr-num-pkt:
+ description:
+ USB TX packet threshold count. This field specifies the number of
+ packets that must be in the TXFIFO before the core can start
+ transmission for the corresponding USB transaction (burst).
+ This count is valid in both host and device modes. It is only used
+ for SuperSpeed operation.
+ Valid values are from 1 to 15. (DWC3 SuperSpeed USB 3.0 Controller
+ Databook)
+ $ref: /schemas/types.yaml#/definitions/uint8
+ minimum: 1
+ maximum: 15
+
+ snps,tx-max-burst:
+ description:
+ Max USB TX burst size. When the system bus is slower than the USB,
+ TX FIFO can underrun during a long burst. Program a smaller value
+ to this field to limit the TX burst size that the core can execute.
+ In Host mode, it only applies to SS Bulk, Isochronous, and Interrupt
+ OUT endpoints. This value is not used in device mode.
+ Valid values are from 1 to 16. (DWC3 SuperSpeed USB 3.0 Controller
+ Databook)
+ $ref: /schemas/types.yaml#/definitions/uint8
+ minimum: 1
+ maximum: 16
+
+ snps,rx-thr-num-pkt-prd:
+ description:
+ Periodic ESS RX packet threshold count (host mode only). Set this and
+ snps,rx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31
+ programming guide section 1.2.4) to enable periodic ESS RX threshold.
+ $ref: /schemas/types.yaml#/definitions/uint8
+ minimum: 1
+ maximum: 16
+
+ snps,rx-max-burst-prd:
+ description:
+ Max periodic ESS RX burst size (host mode only). Set this and
+ snps,rx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31
+ programming guide section 1.2.4) to enable periodic ESS RX threshold.
+ $ref: /schemas/types.yaml#/definitions/uint8
+ minimum: 1
+ maximum: 16
+
+ snps,tx-thr-num-pkt-prd:
+ description:
+ Periodic ESS TX packet threshold count (host mode only). Set this and
+ snps,tx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31
+ programming guide section 1.2.3) to enable periodic ESS TX threshold.
+ $ref: /schemas/types.yaml#/definitions/uint8
+ minimum: 1
+ maximum: 16
+
+ snps,tx-max-burst-prd:
+ description:
+ Max periodic ESS TX burst size (host mode only). Set this and
+ snps,tx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31
+ programming guide section 1.2.3) to enable periodic ESS TX threshold.
+ $ref: /schemas/types.yaml#/definitions/uint8
+ minimum: 1
+ maximum: 16
+
+ tx-fifo-resize:
+ description: Determines if the TX fifos can be dynamically resized depending
+ on the number of IN endpoints used and if bursting is supported. This
+ may help improve bandwidth on platforms with higher system latencies, as
+ increased fifo space allows for the controller to prefetch data into its
+ internal memory.
+ type: boolean
+
+ tx-fifo-max-num:
+ description: Specifies the max number of packets the txfifo resizing logic
+ can account for when higher endpoint bursting is used. (bMaxBurst > 6) The
+ higher the number, the more fifo space the txfifo resizing logic will
+ allocate for that endpoint.
+ $ref: /schemas/types.yaml#/definitions/uint8
+ minimum: 3
+
+ snps,incr-burst-type-adjustment:
+ description:
+ Value for INCR burst type of GSBUSCFG0 register, undefined length INCR
+ burst type enable and INCRx type. A single value means INCRX burst mode
+ enabled. If more than one value specified, undefined length INCR burst
+ type will be enabled with burst lengths utilized up to the maximum
+ of the values passed in this property.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 8
+ uniqueItems: true
+ items:
+ enum: [1, 4, 8, 16, 32, 64, 128, 256]
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ This port is used with the 'usb-role-switch' property to connect the
+ dwc3 to type C connector.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Those ports should be used with any connector to the data bus of this
+ controller using the OF graph bindings specified if the "usb-role-switch"
+ property is used.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: High Speed (HS) data bus.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Super Speed (SS) data bus.
+
+ wakeup-source:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Enable USB remote wakeup.
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+examples:
+ - |
+ usb@4a030000 {
+ compatible = "snps,dwc3";
+ reg = <0x4a030000 0xcfff>;
+ interrupts = <0 92 4>;
+ usb-phy = <&usb2_phy>, <&usb3_phy>;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ };
+ - |
+ usb@4a000000 {
+ compatible = "snps,dwc3";
+ reg = <0x4a000000 0xcfff>;
+ interrupts = <0 92 4>;
+ clocks = <&clk 1>, <&clk 2>, <&clk 3>;
+ clock-names = "bus_early", "ref", "suspend";
+ phys = <&usb2_phy>, <&usb3_phy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ };
+...