Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/usb/cypress,cypd4226.yaml b/Bindings/usb/cypress,cypd4226.yaml
new file mode 100644
index 0000000..89fc9a4
--- /dev/null
+++ b/Bindings/usb/cypress,cypd4226.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/cypress,cypd4226.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress cypd4226 Type-C Controller
+
+maintainers:
+ - Wayne Chang <waynec@nvidia.com>
+
+description:
+ The Cypress cypd4226 is a dual Type-C controller that is controlled
+ via an I2C interface.
+
+properties:
+ compatible:
+ const: cypress,cypd4226
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ reg:
+ const: 0x08
+
+ interrupts:
+ items:
+ - description: cypd4226 host interrupt
+
+ firmware-name:
+ enum:
+ - nvidia,gpu
+ - nvidia,jetson-agx-xavier
+ description: |
+ The name of the CCGx firmware built for product series.
+ should be set one of following:
+ - "nvidia,gpu" for the NVIDIA RTX product series
+ - "nvidia,jetson-agx-xavier" for the NVIDIA Jetson product series
+
+patternProperties:
+ '^connector@[01]$':
+ $ref: /schemas/connector/usb-connector.yaml#
+ required:
+ - reg
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+anyOf:
+ - required:
+ - connector@0
+ - required:
+ - connector@1
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/tegra194-gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+
+ typec@8 {
+ compatible = "cypress,cypd4226";
+ reg = <0x08>;
+ interrupt-parent = <&gpio_aon>;
+ interrupts = <TEGRA194_AON_GPIO(BB, 2) IRQ_TYPE_LEVEL_LOW>;
+ firmware-name = "nvidia,jetson-agx-xavier";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ label = "USB-C";
+ data-role = "dual";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&usb_role_switch0>;
+ };
+ };
+ };
+ };
+ };
+ };