Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/ufs/ufs-common.yaml b/Bindings/ufs/ufs-common.yaml
new file mode 100644
index 0000000..985ea8f
--- /dev/null
+++ b/Bindings/ufs/ufs-common.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/ufs-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for Universal Flash Storage (UFS) Host Controllers
+
+maintainers:
+ - Alim Akhtar <alim.akhtar@samsung.com>
+ - Avri Altman <avri.altman@wdc.com>
+
+properties:
+ clocks: true
+
+ clock-names: true
+
+ freq-table-hz:
+ items:
+ items:
+ - description: Minimum frequency for given clock in Hz
+ - description: Maximum frequency for given clock in Hz
+ deprecated: true
+ description: |
+ Preferred is operating-points-v2.
+
+ Array of <min max> operating frequencies in Hz stored in the same order
+ as the clocks property. If either this property or operating-points-v2 is
+ not defined or a value in the array is "0" then it is assumed that the
+ frequency is set by the parent clock or a fixed rate clock source.
+
+ operating-points-v2:
+ description:
+ Preferred over freq-table-hz.
+ If present, each OPP must contain array of frequencies stored in the same
+ order for each clock. If clock frequency in the array is "0" then it is
+ assumed that the frequency is set by the parent clock or a fixed rate
+ clock source.
+
+ opp-table:
+ type: object
+
+ interrupts:
+ maxItems: 1
+
+ lanes-per-direction:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2]
+ default: 2
+ description:
+ Number of lanes available per direction. Note that it is assume same
+ number of lanes is used both directions at once.
+
+ vdd-hba-supply:
+ description:
+ Phandle to UFS host controller supply regulator node.
+
+ vcc-supply:
+ description:
+ Phandle to VCC supply regulator node.
+
+ vccq-supply:
+ description:
+ Phandle to VCCQ supply regulator node.
+
+ vccq2-supply:
+ description:
+ Phandle to VCCQ2 supply regulator node.
+
+ vcc-supply-1p8:
+ type: boolean
+ description:
+ For embedded UFS devices, valid VCC range is 1.7-1.95V or 2.7-3.6V. This
+ boolean property when set, specifies to use low voltage range of
+ 1.7-1.95V. Note for external UFS cards this property is invalid and valid
+ VCC range is always 2.7-3.6V.
+
+ vcc-max-microamp:
+ description:
+ Specifies max. load that can be drawn from VCC supply.
+
+ vccq-max-microamp:
+ description:
+ Specifies max. load that can be drawn from VCCQ supply.
+
+ vccq2-max-microamp:
+ description:
+ Specifies max. load that can be drawn from VCCQ2 supply.
+
+dependencies:
+ freq-table-hz: [ clocks ]
+ operating-points-v2: [ clocks, clock-names ]
+
+required:
+ - interrupts
+
+allOf:
+ - if:
+ required:
+ - freq-table-hz
+ then:
+ properties:
+ operating-points-v2: false
+ - if:
+ required:
+ - operating-points-v2
+ then:
+ properties:
+ freq-table-hz: false
+
+additionalProperties: true