diff --git a/Bindings/thermal/nvidia,tegra30-tsensor.yaml b/Bindings/thermal/nvidia,tegra30-tsensor.yaml
new file mode 100644
index 0000000..a35da25
--- /dev/null
+++ b/Bindings/thermal/nvidia,tegra30-tsensor.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/nvidia,tegra30-tsensor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra30 Thermal Sensor
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  TSENSOR provides thermal and voltage sensors which monitor temperature
+  and voltage of the chip. Sensors are placed across the die to gauge the
+  temperature of the whole chip. The TSENSOR module:
+
+    Generates an interrupt to SW to lower temperature via DVFS on reaching
+    a certain thermal/voltage threshold.
+
+    Generates a signal to the CAR to reduce CPU frequency by half on reaching
+    a certain thermal/voltage threshold.
+
+    Generates a signal to the PMC when the temperature reaches dangerously high
+    levels to reset the chip and sets a flag in the PMC.
+
+  TSENSOR has two channels which monitor two different spots of the SoC.
+
+properties:
+  compatible:
+    const: nvidia,tegra30-tsensor
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+  assigned-clocks: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - interrupts
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    thermal-sensor@70014000 {
+      compatible = "nvidia,tegra30-tsensor";
+      reg = <0x70014000 0x500>;
+      interrupts = <0 102 4>;
+      clocks = <&clk 100>;
+      resets = <&rst 100>;
+
+      #thermal-sensor-cells = <1>;
+    };