Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/spmi/hisilicon,hisi-spmi-controller.yaml b/Bindings/spmi/hisilicon,hisi-spmi-controller.yaml
new file mode 100644
index 0000000..f882903
--- /dev/null
+++ b/Bindings/spmi/hisilicon,hisi-spmi-controller.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/hisilicon,hisi-spmi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon SPMI controller
+
+maintainers:
+ - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+description: |
+ The HiSilicon SPMI BUS controller is found on some Kirin-based designs.
+ It is a MIPI System Power Management (SPMI) controller.
+
+ The PMIC part is provided by
+ ./Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml.
+
+allOf:
+ - $ref: spmi.yaml#
+
+properties:
+
+ $nodename:
+ pattern: "spmi@[0-9a-f]"
+
+ compatible:
+ const: hisilicon,kirin970-spmi-controller
+
+ reg:
+ maxItems: 1
+
+ hisilicon,spmi-channel:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ number of the Kirin 970 SPMI channel where the SPMI devices are connected.
+
+required:
+ - compatible
+ - reg
+ - hisilicon,spmi-channel
+
+patternProperties:
+ "@[0-9a-f]$":
+ type: object
+
+ description: |
+ PMIC properties, which are specific to the used SPMI PMIC device(s).
+ When used in combination with HiSilicon 6421v600, the properties
+ are documented at
+ drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml.
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ spmi: spmi@fff24000 {
+ compatible = "hisilicon,kirin970-spmi-controller";
+ #address-cells = <2>;
+ #size-cells = <0>;
+ reg = <0x0 0xfff24000 0x0 0x1000>;
+ hisilicon,spmi-channel = <2>;
+
+ pmic@0 {
+ reg = <0 0>;
+ /* pmic properties */
+ };
+ };
+ };
diff --git a/Bindings/spmi/mtk,spmi-mtk-pmif.yaml b/Bindings/spmi/mtk,spmi-mtk-pmif.yaml
new file mode 100644
index 0000000..ac99883
--- /dev/null
+++ b/Bindings/spmi/mtk,spmi-mtk-pmif.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/mtk,spmi-mtk-pmif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek SPMI Controller
+
+maintainers:
+ - Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
+
+description: |+
+ On MediaTek SoCs the PMIC is connected via SPMI and the controller allows
+ for multiple SoCs to control a single SPMI master.
+
+allOf:
+ - $ref: spmi.yaml
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt6873-spmi
+ - mediatek,mt8195-spmi
+ - items:
+ - enum:
+ - mediatek,mt8186-spmi
+ - const: mediatek,mt8195-spmi
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: pmif
+ - const: spmimst
+
+ clocks:
+ minItems: 3
+ maxItems: 3
+
+ clock-names:
+ items:
+ - const: pmif_sys_ck
+ - const: pmif_tmr_ck
+ - const: spmimst_clk_mux
+
+ assigned-clocks:
+ maxItems: 1
+
+ assigned-clock-parents:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8192-clk.h>
+
+ spmi: spmi@10027000 {
+ compatible = "mediatek,mt6873-spmi";
+ reg = <0x10027000 0xe00>,
+ <0x10029000 0x100>;
+ reg-names = "pmif", "spmimst";
+ clocks = <&infracfg CLK_INFRA_PMIC_AP>,
+ <&infracfg CLK_INFRA_PMIC_TMR>,
+ <&topckgen CLK_TOP_SPMI_MST_SEL>;
+ clock-names = "pmif_sys_ck",
+ "pmif_tmr_ck",
+ "spmimst_clk_mux";
+ assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_OSC_D10>;
+ };
+...
diff --git a/Bindings/spmi/qcom,spmi-pmic-arb.yaml b/Bindings/spmi/qcom,spmi-pmic-arb.yaml
new file mode 100644
index 0000000..f983b4a
--- /dev/null
+++ b/Bindings/spmi/qcom,spmi-pmic-arb.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/qcom,spmi-pmic-arb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SPMI Controller (PMIC Arbiter)
+
+maintainers:
+ - Stephen Boyd <sboyd@kernel.org>
+
+description: |
+ The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI
+ controller with wrapping arbitration logic to allow for multiple on-chip
+ devices to control a single SPMI master.
+
+ The PMIC Arbiter can also act as an interrupt controller, providing interrupts
+ to slave devices.
+
+allOf:
+ - $ref: spmi.yaml
+
+properties:
+ compatible:
+ const: qcom,spmi-pmic-arb
+
+ reg:
+ oneOf:
+ - items: # V1
+ - description: core registers
+ - description: interrupt controller registers
+ - description: configuration registers
+ - items: # V2
+ - description: core registers
+ - description: tx-channel per virtual slave regosters
+ - description: rx-channel (called observer) per virtual slave registers
+ - description: interrupt controller registers
+ - description: configuration registers
+
+ reg-names:
+ oneOf:
+ - items:
+ - const: core
+ - const: intr
+ - const: cnfg
+ - items:
+ - const: core
+ - const: chnls
+ - const: obsrvr
+ - const: intr
+ - const: cnfg
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ const: periph_irq
+
+ interrupt-controller: true
+
+ '#address-cells': true
+
+ '#interrupt-cells':
+ const: 4
+ description: |
+ cell 1: slave ID for the requested interrupt (0-15)
+ cell 2: peripheral ID for requested interrupt (0-255)
+ cell 3: the requested peripheral interrupt (0-7)
+ cell 4: interrupt flags indicating level-sense information,
+ as defined in dt-bindings/interrupt-controller/irq.h
+
+ '#size-cells': true
+
+ qcom,ee:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 5
+ description: >
+ indicates the active Execution Environment identifier
+
+ qcom,channel:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 5
+ description: >
+ which of the PMIC Arb provided channels to use for accesses
+
+ qcom,bus-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 1
+ description: >
+ SPMI bus instance. only applicable to PMIC arbiter version 7 and beyond.
+ Supported values, 0 = primary bus, 1 = secondary bus
+
+required:
+ - compatible
+ - reg-names
+ - qcom,ee
+ - qcom,channel
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spmi@fc4cf000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg-names = "core", "intr", "cnfg";
+ reg = <0xfc4cf000 0x1000>,
+ <0xfc4cb000 0x1000>,
+ <0xfc4ca000 0x1000>;
+
+ interrupt-names = "periph_irq";
+ interrupts = <0 190 0>;
+
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <4>;
+
+ qcom,bus-id = <0>;
+ };
+
diff --git a/Bindings/spmi/spmi.yaml b/Bindings/spmi/spmi.yaml
new file mode 100644
index 0000000..c1b06fa
--- /dev/null
+++ b/Bindings/spmi/spmi.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/spmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: System Power Management Interface (SPMI) Controller
+
+maintainers:
+ - Stephen Boyd <sboyd@kernel.org>
+
+description: |
+ The System Power Management (SPMI) controller is a 2-wire bus defined
+ by the MIPI Alliance for power management control to be used on SoC designs.
+
+ SPMI controllers are modelled in device tree using a generic set of
+ bindings defined here, plus any bus controller specific properties, if
+ needed.
+
+ Each SPMI controller has zero or more child nodes (up to 16 ones), each
+ one representing an unique slave at the bus.
+
+properties:
+ $nodename:
+ pattern: "^spmi@.*"
+
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "@[0-9a-f]$":
+ description: up to 16 child PMIC nodes
+ type: object
+
+ properties:
+ reg:
+ items:
+ - minItems: 1
+ items:
+ - minimum: 0
+ maximum: 0xf
+ - enum: [ 0 ]
+ description:
+ 0 means user ID address. 1 is reserved for group ID
+ address.
+
+ required:
+ - reg
+
+required:
+ - reg
+
+additionalProperties: true
+
+examples:
+ - |
+ #include <dt-bindings/spmi/spmi.h>
+
+ spmi@0 {
+ reg = <0 0>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ child@0 {
+ reg = <0 SPMI_USID>;
+ };
+
+ child@7 {
+ reg = <7 SPMI_USID>;
+ };
+ };