Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/spi/spi-pl022.yaml b/Bindings/spi/spi-pl022.yaml
new file mode 100644
index 0000000..7f174b7
--- /dev/null
+++ b/Bindings/spi/spi-pl022.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-pl022.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM PL022 SPI controller
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+ - $ref: spi-controller.yaml#
+ - $ref: /schemas/arm/primecell.yaml#
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+ properties:
+ compatible:
+ contains:
+ const: arm,pl022
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: arm,pl022
+ - const: arm,primecell
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: sspclk
+ - const: apb_pclk
+
+ pl022,autosuspend-delay:
+ description: delay in ms following transfer completion before the
+ runtime power management system suspends the device. A setting of 0
+ indicates no delay and the device will be suspended immediately.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ pl022,rt:
+ description: indicates the controller should run the message pump with realtime
+ priority to minimise the transfer latency on the bus (boolean)
+ type: boolean
+
+ dmas:
+ description:
+ Two or more DMA channel specifiers following the convention outlined
+ in bindings/dma/dma.txt
+ minItems: 2
+ maxItems: 32
+
+ dma-names:
+ description:
+ There must be at least one channel named "tx" for transmit and named "rx"
+ for receive.
+ minItems: 2
+ maxItems: 32
+ additionalItems: true
+ items:
+ - const: rx
+ - const: tx
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi@e0100000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0xe0100000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 31 0x4>;
+ dmas = <&dma_controller 23 1>,
+ <&dma_controller 24 0>;
+ dma-names = "rx", "tx";
+
+ flash@1 {
+ compatible = "st,m25p80";
+ reg = <1>;
+ spi-max-frequency = <12000000>;
+ spi-cpol;
+ spi-cpha;
+ pl022,interface = <0>;
+ pl022,com-mode = <0x2>;
+ pl022,rx-level-trig = <0>;
+ pl022,tx-level-trig = <0>;
+ pl022,ctrl-len = <0x11>;
+ pl022,wait-state = <0>;
+ pl022,duplex = <0>;
+ };
+ };
+...