Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/sound/rt5682.txt b/Bindings/sound/rt5682.txt
new file mode 100644
index 0000000..5e1d08d
--- /dev/null
+++ b/Bindings/sound/rt5682.txt
@@ -0,0 +1,98 @@
+RT5682 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt5682" or "realtek,rt5682i"
+
+- reg : The I2C address of the device.
+
+- AVDD-supply: phandle to the regulator supplying analog power through the
+ AVDD pin
+
+- MICVDD-supply: phandle to the regulator supplying power for the microphone
+ bias through the MICVDD pin. Either MICVDD or VBAT should be present.
+
+- VBAT-supply: phandle to the regulator supplying battery power through the
+ VBAT pin. Either MICVDD or VBAT should be present.
+
+- DBVDD-supply: phandle to the regulator supplying I/O power through the DBVDD
+ pin.
+
+- LDO1-IN-supply: phandle to the regulator supplying power to the digital core
+ and charge pump through the LDO1_IN pin.
+
+Optional properties:
+
+- interrupts : The CODEC's interrupt output.
+
+- realtek,dmic1-data-pin
+ 0: dmic1 is not used
+ 1: using GPIO2 pin as dmic1 data pin
+ 2: using GPIO5 pin as dmic1 data pin
+
+- realtek,dmic1-clk-pin
+ 0: using GPIO1 pin as dmic1 clock pin
+ 1: using GPIO3 pin as dmic1 clock pin
+
+- realtek,jd-src
+ 0: No JD is used
+ 1: using JD1 as JD source
+
+- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
+
+- realtek,btndet-delay
+ The debounce delay for push button.
+ The delay time is realtek,btndet-delay value multiple of 8.192 ms.
+ If absent, the default is 16.
+
+- #clock-cells : Should be set to '<1>', wclk and bclk sources provided.
+- clock-output-names : Name given for DAI clocks output.
+
+- clocks : phandle and clock specifier for codec MCLK.
+- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
+
+- realtek,dmic-clk-rate-hz : Set the clock rate (hz) for the requirement of
+ the particular DMIC.
+
+- realtek,dmic-delay-ms : Set the delay time (ms) for the requirement of
+ the particular DMIC.
+
+- realtek,dmic-clk-driving-high : Set the high driving of the DMIC clock out.
+
+- #sound-dai-cells: Should be set to '<1>'.
+
+Pins on the device (for linking into audio routes) for RT5682:
+
+ * DMIC L1
+ * DMIC R1
+ * IN1P
+ * HPOL
+ * HPOR
+
+Example:
+
+rt5682 {
+ compatible = "realtek,rt5682i";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
+ realtek,ldo1-en-gpios =
+ <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+ realtek,dmic1-data-pin = <1>;
+ realtek,dmic1-clk-pin = <1>;
+ realtek,jd-src = <1>;
+ realtek,btndet-delay = <16>;
+
+ #clock-cells = <1>;
+ clock-output-names = "rt5682-dai-wclk", "rt5682-dai-bclk";
+
+ clocks = <&osc>;
+ clock-names = "mclk";
+
+ AVDD-supply = <&avdd_reg>;
+ MICVDD-supply = <&micvdd_reg>;
+ DBVDD-supply = <&dbvdd_reg>;
+ LDO1-IN-supply = <&ldo1_in_reg>;
+};