Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/sound/rt5668.txt b/Bindings/sound/rt5668.txt
new file mode 100644
index 0000000..a2b7e9a
--- /dev/null
+++ b/Bindings/sound/rt5668.txt
@@ -0,0 +1,50 @@
+RT5668B audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt5668b"
+
+- reg : The I2C address of the device.
+
+Optional properties:
+
+- interrupts : The CODEC's interrupt output.
+
+- realtek,dmic1-data-pin
+ 0: dmic1 is not used
+ 1: using GPIO2 pin as dmic1 data pin
+ 2: using GPIO5 pin as dmic1 data pin
+
+- realtek,dmic1-clk-pin
+ 0: using GPIO1 pin as dmic1 clock pin
+ 1: using GPIO3 pin as dmic1 clock pin
+
+- realtek,jd-src
+ 0: No JD is used
+ 1: using JD1 as JD source
+
+- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
+
+Pins on the device (for linking into audio routes) for RT5668B:
+
+ * DMIC L1
+ * DMIC R1
+ * IN1P
+ * HPOL
+ * HPOR
+
+Example:
+
+rt5668 {
+ compatible = "realtek,rt5668b";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
+ realtek,ldo1-en-gpios =
+ <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+ realtek,dmic1-data-pin = <1>;
+ realtek,dmic1-clk-pin = <1>;
+ realtek,jd-src = <1>;
+};