diff --git a/Bindings/sound/rohm,bd28623.yaml b/Bindings/sound/rohm,bd28623.yaml
new file mode 100644
index 0000000..5abcf92
--- /dev/null
+++ b/Bindings/sound/rohm,bd28623.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rohm,bd28623.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD28623MUV Class D speaker amplifier for digital input
+
+description:
+  This codec does not have any control buses such as I2C, it detect
+  format and rate of I2S signal automatically. It has two signals
+  that can be connected to GPIOs reset and mute.
+
+maintainers:
+  - Katsuhiro Suzuki <katsuhiro@katsuster.net>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: rohm,bd28623
+
+  "#sound-dai-cells":
+    const: 0
+
+  VCCA-supply:
+    description:
+      regulator phandle for the VCCA (for analog) power supply
+
+  VCCP1-supply:
+    description:
+      regulator phandle for the VCCP1 (for ch1) power supply
+
+  VCCP2-supply:
+    description:
+      regulator phandle for the VCCP2 (for ch2) power supply
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      GPIO specifier for the active low reset line
+
+  mute-gpios:
+    maxItems: 1
+    description:
+      GPIO specifier for the active low mute line
+
+required:
+  - compatible
+  - VCCA-supply
+  - VCCP1-supply
+  - VCCP2-supply
+  - "#sound-dai-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    codec {
+      compatible = "rohm,bd28623";
+      #sound-dai-cells = <0>;
+
+      VCCA-supply = <&vcc_reg>;
+      VCCP1-supply = <&vcc_reg>;
+      VCCP2-supply = <&vcc_reg>;
+      reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+      mute-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+    };